Nucleation and Antinucleation Effects of Functionalized Carbon Nanotubes on Cyclic and Linear Poly(ε-caprolactones)

State Transitions and Crystalline Structures of Single Polyethylene Rings: MD Simulations

This study investigates the structural changes of cyclic polyethylene (PE) single chains during cooling through molecular dynamics simulations. The influence of topological constraint on a ring is examined by comparing it with the results of its linear counterpart. A pseudo phase diagram of state transition for PE rings based on length and temperature is constructed, revealing a consistent chain-folding transition during cooling. The shape anisotropy of short crystallized cyclic chains exhibits oscillations with chain length, leading to a more pronounced odd-even effect in single cyclic chains compared with the linear ones. A honeycomb model is proposed to elucidate the odd-even effect of chain folding in crystalline structures of single linear and cyclic chains, and we discuss its potential to predict surface tension. Analyses of the tight folding model and the re-entry modes demonstrate that a cyclic chain possesses a shorter average crystalline stem length and a more compact folded structure than its linear counterpart. The findings highlight the impact of topological change on crystallization and the odd-even effect of chain length, providing valuable insights for understanding polymer crystallization with different topologies.

Rotaxane Formation of Multicyclic Polydimethylsiloxane in a Silicone Network: A Step toward Constructing "Macro-Rotaxanes" from High-Molecular-Weight Axle and Wheel Components

Rotaxanes consisting of a high-molecular-weight axle and wheel components (macro-rotaxanes) have high structural freedom, and are attractive for soft-material applications. However, their synthesis remains underexplored. Here, we investigated macro-rotaxane formation by the topological trapping of multicyclic polydimethylsiloxanes (mc-PDMSs) in silicone networks. mc-PDMS with different numbers of cyclic units and ring sizes was synthesized by cyclopolymerization of a α,ω-norbornenyl-functionalized PDMS. Silicone networks were prepared in the presence of 10-60 wt % mc-PDMS, and the trapping efficiency of mc-PDMS was determined. In contrast to monocyclic PDMS, mc-PDMSs with more cyclic units and larger ring sizes can be quantitatively trapped in the network as macro-rotaxanes. The damping performance of a 60 wt % mc-PDMS-blended silicone network was evaluated, revealing a higher tan δ value than the bare PDMS network. Thus, macro-rotaxanes are promising as non-leaching additives for network polymers.

Insight into melting point depression of polylactide nanocomposites with acetylated chitin nanocrystals

Chitin nanocrystal (ChNC) was used to prepare fully biodegradable nanocomposites with polylactide (PLA). The nucleation and melting behavior of nanocomposites were studied with the objective to correlate PLA-ChNC affinity to PLA crystallization. The results disclose that the PLA nanocomposites with pristine ChNCs and the ones with acetylated ChNCs show completely different nucleation and melting behavior because the role of ChNCs is altered after acetylation. Pristine ChNC acts as inert filler, with weak nucleating activity, while acetylated ChNCs as anti-nucleation agent, restraining crystallization of PLA. Accordingly, the nanocomposites with acetylated ChNCs show melting point depression, with reduced nucleation capability. The recrystallization and self-nucleation, as well as the double-melting behaviors were then studied in terms of acetylation levels of ChNCs and annealing temperatures, in order to better understand the relations between two-phase affinity and PLA chain dynamics. This work provides interesting information around designing thermal properties of the ChNC-filled PLA nanocomposites.

Accelerating the crystallization kinetics of linear polylactides by adding cyclic poly (L-lactide): Nucleation, plasticization and topological effects

Polylactide is one of the most versatile biopolymers, but its slow crystallization limits its temperature usage range. Hence finding ways to enhance it is crucial to widen its applications. Linear and cyclic poly (L-lactide) (l-PLLA and c-PLLA) of similarly low molecular weights (MW) were synthesized by ring-opening polymerization of L-lactide, and ring-expansion methodology, respectively. Two types of blends were prepared by solution mixing: (a) l-PLLA/c-PLLA, at extreme compositions (rich in linear or in cyclic chains), and (b) blends of each of these low MW materials with a commercial high MW linear PLA. The crystallization of the different blends was evaluated by polarized light optical microscopy and differential scanning calorimetry. It was found, for the first time, that in the l-PLLA rich blends, small amounts of c-PLLA (i.e., 5 and 10 wt%) increase the nucleation density, nucleation rate (1/τ₀), spherulitic growth rate (G), and overall crystallization rate (1/τ_50%), when compared to neat l-PLLA, due to a synergistic effect (i.e., nucleation plus plasticization). In contrast, the opposite effect was found in the c-PLLA rich blends. The addition of small amounts of l-PLLA to a matrix of c-PLLA chains causes a decrease in the nucleation density, 1/τ₀, G, and 1/τ_50% values, due to threading effects between cyclic and linear chains. Small amounts of l-PLLA and c-PLLA enhance the crystallization ability of a commercial high MW linear PLA without affecting its melting temperature. The l-PLLA only acts as a plasticizer for the PLA matrix, whereas c-PLLA has a synergistic effect in accelerating the crystallization of PLA that goes beyond simple plasticization. The addition of small amounts of c-PLLA affects not only PLA crystal growth but also its nucleation due to the unique cyclic chains topology.

Isothermal Crystallization Kinetics of Poly(ethylene oxide)/Poly(ethylene glycol)-g-silica Nanocomposites

In this work, the crystallization kinetics of poly(ethylene oxide) (PEO) matrix included with poly(ethylene glycol) (PEG) grafted silica (PEG-g-SiO2) nanoparticles and bare SiO2 were systematically investigated by differential scanning calorimetry (DSC) and polarized light optical microscopy (PLOM) method. PEG-g-SiO2 can significantly increase the crystallinity and crystallization temperature of PEO matrix under the non-isothermal crystallization process. Pronounced effects of PEG-g-SiO2 on the crystalline morphology and crystallization rate of PEO were further characterized by employing spherulitic morphological observation and isothermal crystallization kinetics analysis. In contrast to the bare SiO2, PEG-g-SiO2 can be well dispersed in PEO matrix at low P/N (P: Molecular weight of matrix chains, N: Molecular weight of grafted chains), which is a key factor to enhance the primary nucleation rate. In particular, we found that the addition of PEG-g-SiO2 slows the spherulitic growth fronts compared to the neat PEO. It is speculated that the interfacial structure of the grafted PEG plays a key role in the formation of nuclei sites, thus ultimately determines the crystallization behavior of PEO PNCs and enhances the overall crystallization rate of the PEO nanocomposites.

Surface chain engineering of chitin nanocrystals towards tailoring the nucleating capacities for poly(β-hydroxybutyrate)

Chitin nanocrystal (ChNC) is good nucleation agent for aliphatic polyesters because of its high-energy surface. To moderate its nucleation activity, silane coupling agents with different chain lengths or functional groups were used to modify ChNCs in this work, and biodegradable poly(β-hydroxybutyrate) (PHB) was used as target polymer for crystallization study. Surface coupling of ChNCs improves their phase adhesion to PHB chain and weakens their nucleation activities. The alterations strongly depend on the surface chain structure of ChNCs: sulfhydryl silane-coupled ChNC shows lowered nucleation activity, whereas amino silane-coupled ChNCs even become antinucleation agents. The interfacial compatibility is vital to altered role of ChNCs and to following changes in spherulite growth and ring-banded morphology, which is further disclosed using Flory-Huggins interaction parameters and rheological responses as probes. This work provides useful information on tailoring the functions of ChNCs as nanoadditive for biodegradable aliphatic polyesters by the way of surface chain engineering.

Comparing Multi-Walled Carbon Nanotubes and Halloysite Nanotubes as Reinforcements in EVA Nanocomposites

The influence of carbon multi-walled nanotubes (MWCNTs) and halloysite nanotubes (HNTs) on the physical, thermal, mechanical, and electrical properties of EVA (ethylene vinyl acetate) copolymer was investigated. EVA-based nanocomposites containing MWCNTs or HNTs, as well as hybrid nanocomposites containing both nanofillers were prepared by melt blending. Scanning electron microcopy (SEM) images revealed the presence of good dispersion of both kinds of nanotubes throughout the EVA matrix. The incorporation of nanotubes into the EVA copolymer matrix did not significantly affect the crystallization behavior of the polymer. The tensile strength of EVA-based nanocomposites increased along with the increasing CNTs (carbon nanotubes) content (increased up to approximately 40% at the loading of 8 wt.%). In turn, HNTs increased to a great extent the strain at break. Mechanical cyclic tensile tests demonstrated that nanocomposites with hybrid reinforcement exhibit interesting strengthening behavior. The synergistic effect of hybrid nanofillers on the modulus at 100% and 200% elongation was visible. Moreover, along with the increase of MWCNTs content in EVA/CNTs nanocomposites, an enhancement in electrical conductivity was observed.

Enhanced Functional Properties of Low-Density Polyethylene Nanocomposites Containing Hybrid Fillers of Multi-Walled Carbon Nanotubes and Nano Carbon Black

In this work, hybrid filler systems consisting of multi-walled carbon nanotubes (MWCNTs) and nano carbon black (nCB) were incorporated by melt mixing in low-density polyethylene (LDPE). To hybrid systems a mixture of MWCNTs and nCB a mass ratio of 1:1 and 3:1 were used. The purpose was to study if the synergistic effects can be achieved on tensile strength and electrical and thermal conductivity. The dispersion state of carbon nanofillers in the LDPE matrix has been evaluated with scanning electron microscopy. The melting and crystallization behavior of all nanocomposites was not significantly influenced by the nanofillers. It was found that the embedding of both types of carbon nanofillers into the LDPE matrix caused an increase in the value of Young’s modulus. The results of electrical and thermal conductivity were compared to LDPE nanocomposites containing only nCB or only MWCNTs presented in earlier work LDPE/MWCNTs. It was no synergistic effects of nCB in multi-walled CNTs and nCB hybrid nanocomposites regarding mechanical properties, electrical and thermal conductivity, and MWCNTs dispersion. Since LDPE/MWCNTs nanocomposites exhibit higher electrical conductivity than LDPE/MWCNTs + nCB or LDPE/nCB nanocomposites at the same nanofiller loading (wt.%), it confirms our earlier study that MWCNTs are a more efficient conductive nanofiller. The presence of MWCNTs and their concentration in hybrid nanocomposites was mainly responsible for the improvement of their thermal conductivity.

Cyclic topology effects on the morphology of biocompatible and environment-friendly poly(ε-caprolactone) under nanoscale film confinement

Quantitative grazing incidence X-ray scattering analysis combined with X-ray reflectivity using synchrotron radiation sources was explored for the first time cyclic topology effects on the nanoscale film morphology of poly(ε-caprolactone).

The Effect of Titanium Dioxide Surface Modification on the Dispersion, Morphology, and Mechanical Properties of Recycled PP/PET/TiO2 PBNANOs

Titanium dioxide (TiO₂) nanoparticles have recently appeared in PET waste because of the introduction of opaque PET bottles. We prepare polymer blend nanocomposites (PBNANOs) by adding hydrophilic (hphi), hydrophobic (hpho), and hydrophobically modified (hphoM) titanium dioxide (TiO₂) nanoparticles to 80rPP/20rPET recycled blends. Contact angle measurements show that the degree of hydrophilicity of TiO₂ decreases in the order hphi > hpho > hphoM. A reduction of rPET droplet size occurs with the addition of TiO₂ nanoparticles. The hydrophilic/hydrophobic balance controls the nanoparticles location. Transmission electron microscopy (TEM_ shows that hphi TiO₂ preferentially locates inside the PET droplets and hpho at both the interface and PP matrix. HphoM also locates within the PP matrix and at the interface, but large loadings (12%) can completely cover the surfaces of the droplets forming a physical barrier that avoids coalescence, leading to the formation of smaller droplets. A good correlation is found between the crystallization rate of PET (determined by DSC) and nanoparticles location, where hphi TiO₂ induces the highest PET crystallization rate. PET lamellar morphology (revealed by TEM) is also dependent on particle location. The mechanical behavior improves in the elastic regime with TiO₂ addition, but the plastic deformation of the material is limited and strongly depends on the type of TiO₂ employed.

Isothermal Crystallization Kinetics and Morphology of Double Crystalline PCL/PBS Blends Mixed with a Polycarbonate/MWCNTs Masterbatch

In this work, the 70/30 and 30/70 w/w polycaprolactone (PCL)/polybutylene succinate (PBS) blends and their corresponding PCL/PBS/(polycarbonate (PC)/multiwalled carbon nanotubes (MWCNTs) masterbatch) nanocomposites were prepared in a twin-screw extruder. The nanocomposites contained 1.0 and 4.0 wt% MWCNTs. The blends showed a sea-island morphology typical of immiscible blends. For the nanocomposites, three phases were formed: (i) The matrix (either PCL- or PBS-rich phase depending on the composition), (ii) dispersed polymer droplets of small size (either PCL- or PBS-rich phase depending on the composition), and (iii) dispersed aggregates of tens of micron sizes identified as PC/MWCNTs masterbatch. Atomic force microscopy (AFM) results showed that although most MWCNTs were located in the PC dispersed phase, some of them migrated to the polymer matrix. This is due to the partial miscibility and intimate contact at the interfaces between blend components. Non-isothermal differential scanning calorimetry (DSC) scans for the PCL/PBS blends showed an increase in the crystallization temperature (T_c) of the PCL-rich phase indicating a nucleation effect caused by the PBS-rich phase. For the nanocomposites, there was a decrease in T_c values. This was attributed to a competition between two effects: (1) The partial miscibility of the PC-rich and the PCL-rich and PBS-rich phases, and (2) the nucleation effect of the MWCNTs. The decrease in T_c values indicated that miscibility was the dominating effect. Isothermal crystallization results showed that the nanocomposites crystallized slower than the neat blends and the homopolymers. The introduction of the masterbatch generally increased the thermal conductivity of the blend nanocomposites and affected the mechanical properties.

An accelerated united-atom molecular dynamics simulation on the fast crystallization of ring polyethylene melts

To investigate crystallinities based on trans-structures, we determined the differences in the crystallization properties of ring and linear polymers by performing united-atom-model molecular dynamics (MD) simulations of homogeneous polyethylene melts of equal length, N, which refers to the number of monomers per chain. Modified parameters based on the DREIDING force field for the CH₂ units were used in order to accelerate the crystallization process. To detect polymer crystallization, we introduced some local-order parameters that relate to trans-segments in addition to common crystallinities using neighboring bond orders. Through quenching MD simulations at 5 K/ns, we roughly determined temperature thresholds, T_th, at which crystallization is observed although it was hard to determine the precise T_th as observed in the laboratory time frame with the present computing resources. When N was relatively small (100 and 200), T_th was determined to be 320 and 350 K for the linear- and ring-polyethylene melts, respectively, while T_th was found to be 330 and 350 K, respectively, when N was 1000. Having confirmed that the crystallization of a ring-polyethylene melt occurs faster than that of the analogous linear melt, we conclude that the trans-segment-based crystallinities are effective for the analysis of local crystal behavior.

Evaluation of the resistance to bacterial growth of star-shaped poly(ε-caprolactone)-co-poly(ethylene glycol) grafted onto functionalized carbon nanotubes nanocomposites

Nanocomposites of functionalized carbon nanotubes (CNTs_f) as nanofillers, and a copolymer of star-shaped poly(ε-caprolactone) (stPCL) and poly(ethylene glycol) (PEG) as a polymeric matrix were synthesized, characterized, and their resistance to the growth of Staphylococcus aureus and Pseudomonas aeruginosa was evaluated. CNTs_f contain hydroxyl, carboxyl and acyl chloride groups attached to their surface. Nanocomposites were prepared by mixing CNTs_f to a solution of stPCL-PEG copolymer. Raman and FT-IR spectroscopies confirm the functionalization of carbon nanotubes (CNTs). Star-shaped PCL-PEG copolymer was characterized by Gel permeation chromatography (GPC), and ¹H-NMR and ¹³C-NMR spectroscopies. X-ray photoelectron spectroscopy (XPS) shows that CNTs_f are grafted to the stPCL-PEG copolymer. Crystallization behavior of the nanocomposites depends on the amount of CNTs_f used in their preparation, detecting nucleation (nanocomposites prepared with 0.5 wt.% of CNTs_f) or anti-nucleation (nanocomposites prepared with 1.0 wt.% of CNTs_f) effects. Young's Moduli and thermal stability of nanocomposites were higher, but their resistence to the proliferation of Staphylococcus aureus and Pseudomonas aeruginosa was lower than the observed for their pure polymer matrix.

Precise Synthesis, Properties, and Structures of Cyclic Poly(ε-caprolactone)s

Cyclic PCL (c-PCL) has drawn great attention from academia and industry because of its unique, unusual structure and property characteristics due to the absence of end groups in addition to the biocompatibility and biodegradability of its linear analogue. As a result of much research effort, several synthetic methods have been developed to produce c-PCLs so far. Their chain, morphology and property characteristics were investigated even though carried out on a very limited basis. This feature article reviews the research progress made in the synthesis, morphology, and properties of c-PCL; all results and their pros and cons are discussed in terms of purity and molecular weight distribution in addition to the cyclic topology effect. In addition, we attempted to synthesize a series of c-PCL products of high purity by using intramolecular azido-alkynyl click cyclization chemistry and subsequent precise and controlled separation and purification; and their thermal degradation and phase transitions were investigated in terms of the cyclic topology effect.

Morphology, Nucleation, and Isothermal Crystallization Kinetics of Poly(Butylene Succinate) Mixed with a Polycarbonate/MWCNT Masterbatch

In this study, nanocomposites were prepared by melt blending poly(butylene succinate) (PBS) with a polycarbonate (PC)/multi-wall carbon nanotubes (MWCNTs) masterbatch, in a twin-screw extruder. The nanocomposites contained 0.5, 1.0, 2.0, and 4.0 wt% MWCNTs. Differential scanning calorimetry (DSC), small angle X-ray scattering (SAXS) and wide angle X-ray scattering (WAXS) results indicate that the blends are partially miscible, hence they form two phases (i.e., PC-rich and PBS-rich phases). The PC-rich phase contained a small amount of PBS chains that acted as a plasticizer and enabled crystallization of the PC component. In the PBS-rich phase, the amount of the PC chains present gave rise to increases in the glass transition temperature of the PBS phase. The presence of two phases was supported by scanning electron microscopy (SEM) and atomic force microscopy (AFM) analysis, where most MWCNTs aggregated in the PC-rich phase (especially at the high MWCNTs content of 4 wt%) and a small amount of MWCNTs were able to diffuse to the PBS-rich phase. Standard DSC scans showed that the MWCNTs nucleation effects saturated at 0.5 wt% MWCNT content on the PBS-rich phase, above this content a negative nucleation effect was observed. Isothermal crystallization results indicated that with 0.5 wt% MWCNTs the crystallization rate was accelerated, but further increases in MWCNTs loading (and also in PC content) resulted in progressive decreases in crystallization rate. The results are explained by increased MWCNTs aggregation and reduced diffusion rates of PBS chains, as the masterbatch content in the blends increased.

Morphology, Nucleation, and Isothermal Crystallization Kinetics of Poly(ε-caprolactone) Mixed with a Polycarbonate/MWCNTs Masterbatch

In this study, nanocomposites were prepared by melt blending poly (ε-caprolactone) (PCL) with a (polycarbonate (PC)/multi-wall carbon nanotubes (MWCNTs)) masterbatch in a twin-screw extruder. The nanocomposites contained 0.5, 1.0, 2.0, and 4.0 wt % MWCNTs. Even though PCL and PC have been reported to be miscible, our DSC (Differential Scanning Calorimetry), SAXS (Small Angle X-ray Scattering), and WAXS (Wide Angle X-ray Scattering) results showed partial miscibility, where two phases were formed (PC-rich and PCL-rich phases). In the PC-rich phase, the small amount of PCL chains included within this phase plasticized the PC component and the PC-rich phase was therefore able to crystallize. In contrast, in the PCL-rich phase the amount of PC chains present generates changes in the glass transition temperature of the PCL phase that were much smaller than those predicted by the Fox equation. The presence of two phases was corroborated by SEM, TEM, and AFM observations where a fair number of MWCNTs diffused from the PC-rich phase to the PCL-rich phase, even though there were some MWCNTs agglomerates confined to PC-rich droplets. Standard DSC measurements demonstrated that the MWCNTs nucleation effects are saturated at a 1 wt % MWCNT concentration on the PCL-rich phase. This is consistent with the dielectric percolation threshold, which was found to be between 0.5 and 1 wt % MWCNTs. However, the nucleating efficiency was lower than literature reports for PCL/MWCNTs, due to limited phase mixing between the PC-rich and the PCL-rich phases. Isothermal crystallization experiments performed by DSC showed an increase in the overall crystallization kinetics of PCL with increases in MWCNTs as a result of their nucleating effect. Nevertheless, the crystallinity degree of the nanocomposite containing 4 wt % MWCNTs decreased by about 15% in comparison to neat PCL. This was attributed to the presence of the PC-rich phase, which was able to crystallize in view of the plasticization effect of the PCL component, since as the MWCNT content increases, the PC content in the blend also increases. The thermal conductivities (i.e., 4 wt % MWCNTs) were enhanced by 20% in comparison to the neat material. The nanocomposites prepared in this work could be employed in applications were electrical conductivity is required, as well as lightweight and tailored mechanical properties.

Supernucleation and Orientation of Poly(butylene terephthalate) Crystals in Nanocomposites Containing Highly Reduced Graphene Oxide

The ring-opening polymerization of cyclic butylene terephthalate into poly(butylene terephthalate) (pCBT) in the presence of reduced graphene oxide (RGO) is an effective method for the preparation of polymer nanocomposites. The inclusion of RGO nanoflakes dramatically affects the crystallization of pCBT, shifting crystallization peak temperature to higher temperatures and, overall, increasing the crystallization rate. This was due to a supernucleating effect caused by RGO, which is maximized by highly reduced graphene oxide. Furthermore, combined analyses by differential scanning calorimetry (DSC) experiments and wide-angle X-ray diffraction (WAXS) showed the formation of a thick α-crystalline form pCBT lamellae with a melting point of ∼250 °C, close to the equilibrium melting temperature of pCBT. WAXS also demonstrated the pair orientation of pCBT crystals with RGO nanoflakes, indicating a strong interfacial interaction between the aromatic rings of pCBT and RGO planes, especially with highly reduced graphene oxide.

Effect of the GO Reduction Method on the Dielectric Properties, Electrical Conductivity and Crystalline Behavior of PEO/rGO Nanocomposites

The effect of the reduction method to prepare reduced graphene oxide (rGO) on the melt linear viscoelastic properties, electrical conductivity, polymer matrix crystalline behavior and dielectric properties of PEO-rGO nanocomposites was investigated. Reduction was performed chemically with either sodium borohydride (NaBH₄) or hydrazine monohydrate (N₂H₄·H₂O) or both reduction agents consecutively as well as thermally at 1000 °C. The different reduction methods resulted in exfoliated rGO sheets with different types and amounts of remaining functional groups, as indicated by FT-IR, Raman, TGA and XRD characterization. Moreover, their electrical conductivity ranged between 10⁻⁴ and 10⁻¹ S/cm, with the consecutive use of both chemical reduction agents being far superior. PEO nanocomposites with filler loadings of 0.5 wt %, 1 wt % and 2 wt % were prepared by solvent mixing. The rGO fillers affected the melt linear viscoelastic and crystalline behavior of the PEO matrix and resulted in nanocomposites with a substantially increased electrical conductivity. Despite the wide variability in filler conductivity, the effects on the polymer nanocomposite properties were less distinctive. A correlation was obtained between the reduction of the mobility of the polymer chains (evaluated by the glass transition temperature) and the dielectric strength of the interfacial polarisation originating from the effective entrapment of GO/rGO filler charges at the interface with the less conductive PEO. Thus, favorable interactions of the polar PEO with the filler led to reduced mobility of the PEO chains and thereby a more effective entrapment of the filler charges at the PEO interface.

Polymer Nanocomposites via Click Chemistry Reactions

The emerging areas of polymer nanocomposites, as some are already in use in industrial applications and daily commodities, have the potential of offering new technologies with all manner of prominent capabilities. The incorporation of nanomaterials into polymeric matrix provides significant improvements, such as higher mechanical, thermal or electrical properties. In these materials, interface/interphase of components play a crucial role bringing additional features on the resulting nanocomposites. Among the various preparation strategies of such materials, an appealing strategy relies on the use of click chemistry concept as a multi-purpose toolbox for both fabrication and modulation of the material characteristics. This review aims to deliver new insights to the researchers of the field by noticing effective click chemistry-based methodologies on the preparation of polymer nanocomposites and their key applications such as optic, biomedical, coatings and sensor.

The influence of small amounts of linear polycaprolactone chains on the crystallization of cyclic analogue molecules

C-PCL/L-PCL blends show a synergistic decrease in their isothermal crystallization rates as compared to the expectation of a simple mixing law due to the threading effect of the linear on the cyclic chains.

Cyclic polymers revealing topology effects upon self-assemblies, dynamics and responses

A variety of single- and multicyclic polymers having programmed chemical structures with guaranteed purity have now become obtainable owing to a number of synthetic breakthroughs achieved in recent years. Accordingly, a broadening range of studies has been undertaken to gain updated insights on fundamental polymer properties of cyclic polymers in either solution or bulk, in either static or dynamic states, and in self-assemblies, leading to unusual properties and functions of polymer materials based on their cyclic topologies. In this article, we review recent studies aiming to achieve distinctive properties and functions by cyclic polymers unattainable by their linear or branched counterparts. We focus, in particular, on selected examples of unprecedented topology effects of cyclic polymers upon self-assemblies, dynamics and responses, to highlight current progress in Topological Polymer Chemistry.

Amino-Functionalized Multiwalled Carbon Nanotubes Lead to Successful Ring-Opening Polymerization of Poly(ε-caprolactone): Enhanced Interfacial Bonding and Optimized Mechanical Properties

In this work, the synthesis, structural characteristics, interfacial bonding, and mechanical properties of poly(ε-caprolactone) (PCL) nanocomposites with small amounts (0.5, 1.0, and 2.5 wt %) of amino-functionalized multiwalled carbon nanotubes (f-MWCNTs) prepared by ring-opening polymerization (ROP) are reported. This method allows the creation of a covalent-bonding zone on the surface of nanotubes, which leads to efficient debundling and therefore satisfactory dispersion and effective load transfer in the nanocomposites. The high covalent grafting extent combined with the higher crystallinity provide the basis for a significant enhancement of the mechanical properties, which was detected in the composites with up to 1 wt % f-MWCNTs. Increasing filler concentration encourages intrinsic aggregation forces, which allow only minor grafting efficiency and poorer dispersion and hence inferior mechanical performance. f-MWCNTs also cause a significant improvement on the polymerization reaction of PCL. Indeed, the in situ polymerization kinetics studies reveal a significant decrease in the reaction temperature, by a factor of 30-40 °C, combined with accelerated the reaction kinetics during initiation and propagation and a drastically reduced effective activation energy.