Highly Selective CO2 Capture by Triazine-Based Benzimidazole-Linked Polymers

Highly Selective SO2 Capture by Triazine-Functionalized Triphenylamine-Based Nanoporous Organic Polymers

The emissions of sulfur dioxide (SO2) from combustion exhaust gases pose significant risks to public health and the environment due to their harmful effects. Therefore, the development of highly efficient adsorbent polymers capable of capturing SO2 with high capacity and selectivity has emerged as a critical challenge in recent years. However, existing polymers often exhibit poor SO2/CO2 and SO2/N2 selectivity. Herein, we report two triazine-functionalized triphenylamine-based nanoporous organic polymers (ANOP-6 and ANOP-7) that demonstrate both good SO2 uptake and high SO2/CO2 and SO2/N2 selectivity. These polymers were synthesized through cost-effective Friedel-Crafts reactions using cyanuric chloride, 3,6-diphenylaminecarbazole, and 2,2',7,7'-tetrakis(diphenylamino)-9,9'-spirobifluorene. The resultant ANOPs are composed of triazine and triphenylamine units and feature an ultramicroporous structure. Remarkably, ANOPs exhibit impressive adsorption capacities for SO2, with uptakes of approximately 3.31-3.72 mmol·g-1 at 0.1 bar, increasing to 9.52-9.94 mmol·g-1 at 1 bar. The static adsorption isotherms effectively illustrate the ability of ANOPs to separate SO2 from SO2/CO2 and SO2/N2 mixtures. At 298 K and 1 bar, ANOP-6 shows outstanding selectivity toward SO2/CO2 (248) and SO2/N2 (13146), surpassing all previously reported triazine-based nanoporous organic polymers. Additionally, dynamic breakthrough tests demonstrate the superior separation properties of ANOPs for SO2 from an SO2/CO2/N2 mixture. ANOPs exhibit a breakthrough time of 73.1 min·g-1 and a saturated SO2 capacity of 0.53 mmol·g-1. These results highlight the exceptional adsorption properties of ANOPs for SO2, indicating their promising potential for the highly efficient capture of SO2 from flue gas.

Topology-Selective Manipulation of Two-Dimensional Covalent Organic Frameworks

The manipulation of topological architectures in two-dimensional (2D) covalent organic framework (COF) materials for different applications is promising but remains a great challenge. Here, we first report the topology-selective synthesis of two distinct varieties of 2DCOFs, imine-based HT-COFs and benzimidazole-fused BI-HT-COFs, by simply altering acid catalysts. To HT-COFs, a superlattice of 1D channel with a persistent triangular shape is formed via Schiff base reaction, while to BI-HT-COFs, a hexagonal lattice structure with a highly conjugated structure and imidazole linkages is constructed due to an imine-based cyclization reaction. The two COFs exhibited marked differences in their bandgap, chemical stability, molecular adsorption, and catalytic activity, which make them have different fields of application. This work not only diversifies the hexaaminotriphenylene-based 2DCOF topologies but also provides vivid examples of structure-property relationships, which would facilitate fundamental research and potential applications of 2DCOFs.

Selective Metal-Free CO2 Photoreduction in Water Using Porous Nanostructures with Internal Molecular Free Volume

The conversion of CO2 to a sole carbonaceous product using photocatalysis is a sustainable solution for alleviating the increasing levels of CO2 emissions and reducing our dependence on nonrenewable resources such as fossil fuels. However, developing a photoactive, metal-free catalyst that is highly selective and efficient in the CO2 reduction reaction (CO2RR) without the need for sacrificial agents, cocatalysts, and photosensitizers is challenging. Furthermore, due to the poor solubility of CO2 in water and the kinetically and thermodynamically favored hydrogen evolution reaction (HER), designing a highly selective photocatalyst is challenging. Here, we propose a molecular engineering approach to design a photoactive polymer with high CO2 permeability and low water diffusivity, promoting the mass transfer of CO2 while suppressing HER. We have incorporated a contorted triptycene scaffold with "internal molecular free volume (IMFV)" to enhance gas permeability to the active site by creating molecular channels through the inefficient packing of polymer chains. Additionally, we introduced a pyrene moiety to promote visible-light harvesting capability and charge separation. By leveraging these qualities, the polymer exhibited a high CO generation rate of 77.8 μmol g-1 h-1, with a high selectivity of ∼98% and good recyclability. The importance of IMFV was highlighted by replacing the contorted triptycene unit with a planar scaffold, which led to a selectivity reversal favoring HER over CO2RR in water. In situ electron paramagnetic resonance (EPR), time-resolved photoluminescence spectroscopy (TRPL), and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) techniques, further supported by theoretical calculations, were employed to enlighten the mechanistic insight for metal-free CO2 reduction to exclusively CO in water.

Synthesis, Characterization, and Environmental Applications of Novel Per-Fluorinated Organic Polymers with Azo- and Azomethine-Based Linkers via Nucleophilic Aromatic Substitution

This study reports on the synthesis and characterization of novel perfluorinated organic polymers with azo- and azomethine-based linkers using nucleophilic aromatic substitution. The polymers were synthesized via the incorporation of decafluorobiphenyl and hexafluorobenzene linkers with diphenols in the basic medium. The variation in the linkers allowed the synthesis of polymers with different fluorine and nitrogen contents. The rich fluorine polymers were slightly soluble in THF and have shown molecular weights ranging from 4886 to 11,948 g/mol. All polymers exhibit thermal stability in the range of 350-500 °C, which can be attributed to their structural geometry, elemental contents, branching, and cross-linking. For instance, the cross-linked polymers with high nitrogen content, DAB-Z-1h and DAB-Z-1O, are more stable than azomethine-based polymers. The cross-linking was characterized by porosity measurements. The azo-based polymer exhibited the highest surface area of 770 m2/g with a pore volume of 0.35 cm3/g, while the open-chain azomethine-based polymer revealed the lowest surface area of 285 m2/g with a pore volume of 0.0872 cm3/g. Porous structures with varied hydrophobicities were investigated as adsorbents for separating water-benzene and water-phenol mixtures and selectively binding methane/carbon dioxide gases from the air. The most hydrophobic polymers containing the decafluorbiphenyl linker were suitable for benzene separation, while the best methane uptake values were 6.14 and 3.46 mg/g for DAB-Z-1O and DAB-A-1O, respectively. On the other hand, DAB-Z-1h, with the highest surface area and being rich in nitrogen sites, has recorded the highest CO2 uptake at 298 K (17.25 mg/g).

Aromatic Amine-Functionalized Covalent Organic Frameworks (COFs) for CO2/N2 Separation

CO₂ is a prominent example for an exhaust gas, and it is known for its high impact on global warming. Therefore, carbon capture from CO₂ emissions of industrial processes is increasingly important to halt and prevent the disruptive consequences of global warming. Covalent organic frameworks (COFs) as porous nanomaterials have been shown to selectively adsorb CO₂ in high quantities and with high CO₂/N₂ selectivity. Interactions with amines are recognized to selectively adsorb CO₂ and help capture it from exhaust emissions. Herein, a novel COF (Me₃TFB-(NH₂)₂BD), which was not accessible via a direct condensation reaction, was synthetized by dynamic linker exchange starting with Me₃TFB-BD. Despite the linker exchange, the porosity of the COF was largely maintained, resulting in a high BET surface area of 1624 ± 89 m²/g. The CO₂ and N₂ adsorption isotherms at 273 and 295 K were studied to determine the performance in carbon capture at flue gas conditions. Me₃TFB-(NH₂)₂BD adsorbs 1.12 ± 0.26 and 0.72 ± 0.07 mmol/g of CO₂ at 1 bar and 273 and 295 K, respectively. The COF shows a high CO₂/N₂ IAST selectivity under flue gas conditions (273 K:83 ± 11, 295 K: 47 ± 11). The interaction of the aromatic amine groups with CO₂ is based on physisorption, which is expected to make the regeneration of the material energy efficient.

Micro-/Mesoporous Fluorescent Polymers and Devices for Visual Pesticide Detection with Portability, High Sensitivity, and Ultrafast Response

The residue of pesticides in crops, soil, and water continues to be a widespread concern due to the threat to human health and food safety. With the aim to develop highly sensitive sensing materials and portable detection devices, two dicarbazole-based fluorescent micro-/mesoporous polymers (JYs) with a larger specific surface area and pore sizes ranging from 1.1 to 34.2 nm are synthesized. The Stern-Volmer constants of JY fluorescence quenching for imidacloprid (50,063 M^-1) exceed 23-51 times those of the reported porous organic polymers (980-2173 M^-1). Of particular interest is the observation that JYs show rapid fluorescence response (2 s) and ultralow detection limit (30 ppb) for imidacloprid in water medium. The pronounced chemsensing property is attributed to the synergistic role of the hierarchical pore structure, large π-conjugation of chromophore groups, and strong inner filter effect between the polymer and imidacloprid molecule. Moreover, the pesticide detection of JYs exhibits good interference resistance in complicated service environments such as the extract liquids of the apple peel and field soil as well as aqueous solutions of various cations and anions. Because of the portability, excellent reusability, and sensitive fluorescence response, the prepared JYs and detection devices have promising applications in the on-site monitoring and early warning of the pesticide residues.

Catalyst-free development of N-doped microporous carbons for selective CO2 separation

Owing to their catalyst-free development, high yield, notable CO₂ uptake performance, and excellent CO₂/CH₄ selectivity, the fabricated N-doped microporous carbons (NMCs) are highly suitable for selective CO₂ separation.

Construction of Thiazolo[5,4-d]thiazole-based Two-Dimensional Network for Efficient Photocatalytic CO2 Reduction

The efficient conversion of CO₂ to chemical fuels driven by solar energy is still a challenging research area in photosynthesis, in which the conversion efficiency greatly relies on photocatalytic coenzyme NADH regeneration. Herein, a photocatalyst/biocatalyst synergetic system based on a conjugated microporous polymer (CMP) was prepared for sustainable and highly selective photocatalytic reduction of CO₂ to methanol. Two thiazolo[5,4-d]thiazole-linked CMPs (TZTZ-TA and TZTZ-TP) were designed and synthesized as photocatalysts. Slight skeleton modification led to a great difference in their photocatalytic performance. Triazine-based TZTZ-TA exhibited an unprecedentedly high NADH regeneration efficiency of 82.0% yield within 5 min. Furthermore, the in situ photocatalytic NADH regeneration system could integrate with three consecutive enzymes for efficient conversion of CO₂ into methanol. This CMP-enzyme hybrid system provides a new avenue for accomplishing the liquid sunshine from CO₂.

Synthesis, Conformational Analysis, Infrared, Raman and UV-Visible Spectra of Novel Schiff Bases compiled with DFT Calculations

Objective:

Two novel Schiff bases named, 2-((2-Hydroxybenzylidene)amino)-4,5,6,7- tetrahydrobenzo[b] thiophene-3-carbonitrile (BESB1) and 2-((Furan-2-ylmethylene)amino)-4,5,6, 7-tetrahydro-benzo[b]thiophene-3-carbonitrile (BESB2) were synthesized.

Methods:

The structures were characterized based on CHN elemental analysis, mid-infrared (400– 4000 cm-1), Raman (100-4000 cm-1), 1H NMR, mass and UV-Vis spectroscopic measurements. In addition, quantum mechanical calculations using DFT-B3LYP method at 6-31G(d) basis set were carried out for both Schiff bases. Initially, we have carried out complete geometry optimizations followed by frequency calculations for the proposed conformational isomers; BESB1 (A–E) and BESB2 (F–J) based on the orientations of both CN and OH groups against the azomethine lonepair (NLP) in addition to the 3D assumption.

Results:

The computational outcomes favor conformer A for BESB1 in which the C≡N and OH moieties are cis towards the NLP while conformer G is preferred for BESB2 (the C≡N/furan-O are cis/trans towards the NLP) which was found consistent with the results of relaxed potential energy surface scan. Aided by normal coordinate analysis of the Cartesian coordinate displacements, we have suggested reliable vibrational assignments for all observed IR and Raman bands. Moreover, the electronic absorption spectra for the favored conformers were predicted in DMSO solution using TD-B3LYP/6-31G(d) calculations. Similarly, the 1H NMR chemical shifts were also estimated using GIAO approach implementing PCM including solvent effects (DMSO-d6).

Conclusion:

Proper interpretations of the observed electronic transition, chemical shifts, IR and Raman bands were presented in this study.

Silica-Supported Nitrogen-Enriched Porous Benzimidazole-Linked and Triazine-Based Polymers for the Adsorption of CO2

Two crystalline and five amorphous benzimidazole polymers (BINP) were synthesized and conjugated to porous silica via amine and aldehyde-based materials by a simple reflux procedure. The resulting polymers were subject to thermal analysis for monitoring and quantification of the adsorption and desorption of CO₂. All the polymers were capable of adsorbing CO₂ from a flowing stream of only 80 mL/min at 25 °C. The adsorbed CO₂ onto the polymers were effectively desorbed at room temperature, illustrating the potential application of such polymers for repeated adsorption/desorption of CO₂. The CO₂ adsorption capacities of these polymers were dependent upon their nitrogen content, specific surface area, and pore size. The available nitrogen atoms for binding to the carbon of CO₂ via tetrel bonds also plays an important role in the capture of this gas. Minimal and much lower CO₂ adsorption was also noted with two crystalline polymers, compared to the five amorphous counterparts. Intermolecular hydrogen bonding and π-π interaction effectively prevented the polymer N sites of the crystalline polymers from interacting with polarized CO₂ molecules.

Quantifying the nitrogen effect on CO2 capture using isoporous network polymers

The impact of nitrogen atoms on CO₂ binding was evaluated for two isostructural porous bisimidazole-linked polymers (BILPs), which serendipitously had identical surface areas and pore size distributions, a very rare observation. The two structures differ only in the core of the trialdehyde component, the nitrogen atom (BILP-19) versus benzene ring (BILP-5). Such a slight difference, however, has brought about a stronger CO₂ capture capacity of BILP-19 and hence increased CO₂/N₂ separation capability.

A hydrophilic covalent organic framework for photocatalytic oxidation of benzylamine in water

The highly hydrophilic COF material (TFPT-BMTH) was constructed by pore surface functionalizing strategy, and exhibited excellent porosity, high crystallinity, and good thermal and chemical stability. The resulting COF exhibits significant catalytic activity and recyclability together with environmental benignity in photocatalytic oxidation of benzylamine in water under ambient conditions.

A Pd NP-confined novel covalent organic polymer for catalytic applications

A novel unsymmetrical covalent organic polymer was synthesized via nucleophilic substitution reaction of 2,4,6-trichloro-1,3,5-triazine with p-amino phenol.

Conjugated porous polymers: incredibly versatile materials with far-reaching applications

This review discusses conjugated porous polymers and focuses on relating design principles and synthetic methods to key properties and applications such as (photo)catalysis, gas storage, chemical sensing, energy storage and environmental remediation.

Rational design of functionalized covalent organic frameworks and their performance towards CO2 capture

We describe the design and synthesis of two new functionalized covalent organic frameworks, named Cz-COF and Tz-COF, by using monomers containing carbazole and benzobisthiazole as building blocks. The resultant materials possess high crystallinity, permanent porosities as well as abundant heteroatom activated sites in the framework. As solid adsorbents, both COFs exhibit excellent CO2 uptake (11.0 wt% for Cz-COF and 15.4 wt% for Tz-COF), high adsorption selectivity for CO2 over N2 and good recyclability.

Rapid Polymerization of Aromatic Vinyl Monomers to Porous Organic Polymers via Acid Catalysis at Mild Condition

Porous organic polymers (POPs) have enormous applications in various fields and thus have received a lot of research attention in recent decades. Numerous synthetic methods have been developed, but mild synthesis conditions and fast polymerization rate are highly desired. Herein, high porous POPs with high surface areas from aromatic vinyl monomers by using acid catalysis method is reported. The polymerization is ultrafast and could be accomplished even in 5 min at room temperature. Furthermore, the surface area can be tuned by using various acid catalysts and controlling the reaction time. Due to the high surface area, these POPs show promising adsorption of carbon dioxide and hydrogen, respectively. Furthermore, the large π-system of the building block and high surface area of the POPs also make them show potential applications in photocatalytic hydrogen evolution as well as promising catalyst support for metal nanoparticles.

Nitrogen-Rich Porous Organic Polyamines for Stabilization of Highly Dispersed Metal Nanoparticles and Catalytic Application

Nitrogen-rich triazine-based porous organic polyamines (POPa) synthesized via a one-step polycondensation of melamine and 4,4',4''-(1,3,5-triazine-2,4,6-triyl)tribenzaldehyde is employed to synthesize Au and Pd nanoparticles well-dispersed on POPa. The as-prepared POPa-supported Au NPs and Pd NPs (AuNPs@POPa, PdNPs@POPa) with a narrow size distribution show remarkable catalytic activity for the reduction of nitrobenzene compounds and organic dyes and the Suzuki-Miyaura coupling reaction, respectively. Benefitting from POPa the AuNPs@POPa and PdNPs@POPa catalysts can be readily recovered and reused almost without loss of activity. The nitrogen-rich porous organic polyamines provide great opportunities to prepare functional metal nanocatalysts with potential in the heterogeneous catalysis field.

Nitrogen Amelioration-Driven Carbon Dioxide Capture by Nanoporous Polytriazine

Nitrogen-enriched nanoporous polytriazines (NENPs) have been synthesized by ultrafast microwave-assisted condensation of melamine and cyanuric chloride. The experimental conditions have been optimized to tune the textural properties by synthesizing materials at different times, temperatures, microwave powers, and solvent contents. The maximum specific surface area (SA_BET) of 840 m² g^-1 was estimated in the sample (NENP-1) synthesized at 140 °C with a microwave power of 400 W and reaction time of 30 min. One of the major objectives of achieving a large nitrogen content as high as 52 wt % in the framework was realized. As predicted, the nitrogen amelioration has benefitted the application by capturing a very good amount of CO₂ of 22.9 wt % at 273 K and 1 bar. Moreover, the CO₂ storage capacity per unit specific surface area (per m² g^-1) is highest among the reported nanoporous organic frameworks. The interaction of the CO₂ molecules with the polytriazine framework was theoretically investigated by using density functional theory. The experimental CO₂ capture capacity was validated from the outcome of the theoretical calculations. The superior CO₂ capture capability along with the theoretical investigation not only makes the nanoporous NENPs superior adsorbents for the energy and environmental applications but also provides a significant insight into the fundamental understanding of the interaction of CO₂ molecules with the amine functionalities of the nanoporous frameworks.

Pyrene Bearing Azo-Functionalized Porous Nanofibers for CO2 Separation and Toxic Metal Cation Sensing

A novel luminescent azo-linked polymer (ALP) has been constructed from 1,3,6,8-tetra(4-aminophenyl)pyrene using a copper(I)-catalyzed oxidative homocoupling reaction. The polymer displays high porosity with a Brunauer-Emmett-Teller surface area of 1259 m² g^-1 and narrow pore size distribution (1.06 nm) and is able to take up a significant amount of CO₂ (2.89 mmol g^-1) at 298 K and 1.00 bar with a high isosteric heat of adsorption of 27.5 kJ mol^-1. Selectivity studies applying the ideal adsorbed solution theory revealed that the novel polymer has moderately good selectivities for CO₂/N₂ (55.1) and CO₂/CH₄ (10.9). Furthermore, the ALP shows fluorescence quenching in the presence of Hg²⁺, Pb²⁺, Tl⁺, and Al³⁺ ions. Compared with these ions, the ALP showed no sensitivity to light metal ions such as Na⁺, K⁺, and Ca²⁺ in ethanol-water solution, clearly indicating the high selectivity of the ALP toward heavy metal ions. The exceptional physiochemical stability, high porosity, and strong luminescence make this polymer an excellent candidate as a fluorescent chemical sensor for the detection of heavy metal ions.

Pristine and Carboxyl-Functionalized Tetraphenylethylene-Based Ladder Networks for Gas Separation and Volatile Organic Vapor Adsorption

A novel tetraphenylethylene-based ladder network (MP1) made by polycondensation reaction from 4,4',4″,4‴-(ethene-1,1,2,2-tetrayl)tetrakis(benzene-1,2-diol) and 2,3,5,6-tetrafluoroterephthalonitrile and its COOH-functionalized analogue (MP2) were synthesized for the first time. Their structures were confirmed by solid-state nuclear magnetic resonance (13C cross-polarization magic angle spinning), Fourier transform infrared spectroscopy, and elementary analysis. MP1 exhibited a high Brunauer-Emmett-Teller surface area (1020 m2 g-1), whereas the COOH-functionalized MP2 showed a much smaller surface area (150 m2 g-1) but displayed a more uniform pore size distribution. Because of the high density of nitrile groups in the network polymers of intrinsic microporosity (PIMs) and strong interaction with quadrupole CO2 molecules, MP1 exhibited a high CO2 adsorption capacity of 4.2 mmol g-1 at 273 K, combined with an isosteric heat of adsorption (Q st) of 29.6 kJ mol-1. The COOH-functionalized MP2 showed higher Q st of 34.2 kJ mol-1 coupled with a modest CO2 adsorption capacity of 2.2 mmol g-1. Both network PIMs displayed high theoretical ideal adsorbed solution theory CO2/N2 selectivities (51 and 94 at 273 K vs 34 and 84 at 298 K for MP1 and MP2, respectively). The high selectivities of MP1 and MP2 were confirmed by experimental column breakthrough experiments with CO2/N2 selectivity values of 23 and 45, respectively. Besides the promising CO2 capture and CO2/N2 selectivity properties, MP1 also demonstrated high sorption capacity for toxic volatile organic vapors. At 298 K and a relative pressure of 0.95, benzene and toluene sorption uptakes reached 765 and 1041 mg g-1, respectively. Moreover, MP1 also demonstrated some potential for adsorptive separation of xylene isomers with adsorptive selectivity of 1.75 for m-xylene/o-xylene.

Microporous Polymer Networks for Carbon Capture Applications

A new generation of porous polymer networks has been obtained in quantitative yield by reacting two rigid trifunctional aromatic monomers (1,3,5-triphenylbenzene and triptycene) with two ketones having electron-withdrawing groups (trifluoroacetophenone and isatin) in superacidic media. The resulting amorphous networks are microporous materials, with moderate Brunauer-Emmett-Teller surface areas (from 580 to 790 m² g^-1), and have high thermal stability. In particular, isatin yields networks with a very high narrow microporosity contribution, 82% for triptycene and 64% for 1,3,5-triphenylbenzene. The existence of favorable interactions between lactams and CO₂ molecules has been stated. The materials show excellent CO₂ uptakes (up to 207 mg g^-1 at 0 °C/1 bar) and can be regenerated by vacuum, without heating. Under postcombustion conditions, their CO₂/N₂ selectivities are comparable to those of other organic porous networks. Because of the easily scalable synthetic method and their favorable characteristics, these materials are very promising as industrial adsorbents.

Cyclophosphazene-Based Hybrid Nanoporous Materials as Superior Metal-Free Adsorbents for Gas Sorption Applications

Cyclophosphazene-based inorganic-organic hybrid nanoporous materials (CHNMs) have been synthesized by a facile solvothermal method. The condensation of pyrrole with the reaction product of phosphonitrilic chloride trimer and 4-hydroxybenzaldehyde resulted in the formation of high-surface-area CHNMs. The maximum specific surface area (SA_BET) of 1328 m² g^-1 with hierarchical pore structures having micropores centered at 1.18 nm and mesopores in the range of 2.6-3.6 nm was estimated from the N₂ sorption analysis. Observation of high SA_BET could be attributed to the synergy effect exerted by the cyclophosphazene moiety owing to its three-dimensional paddle wheel structure. The metal-free adsorbent exhibited a high and reversible CO₂ uptake of 22.8 wt % at 273 K and 1 bar. The performance is on the higher side among the reported metal-free inorganic-organic hybrid nanoporous adsorbents. Moreover, the high H₂ uptake of 2.02 wt % at 77 K and 1 bar is an added advantage. The superior performance of the adsorbents for the gas sorption applications could be attributed to the combined effect of high SA_BET and hierarchical pore structure, which has made CHNMs good candidates for energy and environmental applications.

Enhanced carbon dioxide capture in an indole-based microporous organic polymer via synergistic effects of indoles and their adjacent carbonyl groups

A carbonyl-functionalized indole-based microporous organic polymer (PKIN) was designed and synthesized in the presence of the FeCl₃ catalyst by a facile direct oxidative coupling reaction.

Porous Organic Polymers for Post-Combustion Carbon Capture

One of the most pressing environmental concerns of our age is the escalating level of atmospheric CO₂ . Intensive efforts have been made to investigate advanced porous materials, especially porous organic polymers (POPs), as one type of the most promising candidates for carbon capture due to their extremely high porosity, structural diversity, and physicochemical stability. This review provides a critical and in-depth analysis of recent POP research as it pertains to carbon capture. The definitions and terminologies commonly used to evaluate the performance of POPs for carbon capture, including CO₂ capacity, enthalpy, selectivity, and regeneration strategies, are summarized. A detailed correlation study between the structural and chemical features of POPs and their adsorption capacities is discussed, mainly focusing on the physical interactions and chemical reactions. Finally, a concise outlook for utilizing POPs for carbon capture is discussed, noting areas in which further work is needed to develop the next-generation POPs for practical applications.

Hybrid Triazine-Boron Two-Dimensional Covalent Organic Frameworks: Synthesis, Characterization, and DFT Approach to Layer Interaction Energies

The conversion of 2,4,6-tris(4'-bromophenyl)-1,3,5-triazine to the respective triboronic acid was successfully accomplished by a simple triple Br/Li exchange followed by boronation. Further dehydrative condensation reactions with 2,3,6,7,10,11-hexahydroxytriphenylene or 2,3,6,7-tetrahydroxy-9,10-dilalkylanthracenes (R = Me, Et) resulted in materials featuring good porosity and sorption properties with the nitrogen uptake exceeding 500 cm³/g (STP) and S_BET up to 1267 m²/g (T = 77.2 K). In addition, simple dehydration of this compound was employed for the preparation of a hybrid 2D COF composed of triazine, boroxine, and benzene rings. The formation of materials was confirmed by the IR analysis and NMR studies on water-decomposed samples. All obtained COFs exhibit high thermal stability with decomposition temperatures in the range of 400-600 °C. They also show quite different morphology ranging from regular 0.5-4 μm spherical and ellipsoidal clusters to 5-12 μm bent rodlike particles. The PXRD studies supported by periodic DFT modeling in Crystal09 package revealed the formation of crystalline 2D honeycomb-type lattices with eclipsed stacking models. In addition, the differences between boroxine-triazine material and related COF-1 and CTF-1 structures were investigated by comparing layer interaction energies, work function values as well as atomic charges and electrostatic potential maps plotted on the electron density surfaces. It demonstrates that the interactions between layers are enhanced by the stacking of triazine and boroxine rings. Finally, we have investigated the upper limit to space accessible volume using a procrystal electron density approach.

BILP-19-An Ultramicroporous Organic Network with Exceptional Carbon Dioxide Uptake

Porous benzimidazole-based polymers (BILPs) have proven to be promising for carbon dioxide capture and storage. The polarity of their chemical structure in combination with an inherent porosity allows for adsorbing large amounts of carbon dioxide in combination with high selectivities over unpolar guest molecules such as methane and nitrogen. For this reason, among purely organic polymers, BILPs contain some of the most effective networks to date. Nevertheless, they are still outperformed by competitive materials such as metal-organic frameworks (MOFs) or metal doped porous polymers. Here, we report the synthesis of BILP-19 and its exceptional carbon dioxide uptake of up to 6 mmol•g-1 at 273 K, making the network comparable to state-of-the-art materials. BILP-19 precipitates in a particulate structure with a strongly anisotropic growth into platelets, indicating a sheet-like structure for the network. It exhibits only a small microporous but a remarkable ultra-microporous surface area of 144 m2•g-1 and 1325 m2•g-1, respectively. We attribute the exceptional uptake of small guest molecules such as carbon dioxide and water to the distinct ultra-microporosity. Additionally, a pronounced hysteresis for both guests is observed, which in combination with the platelet character is probably caused by an expansion of the interparticle space, creating additional accessible ultra-microporous pore volume. For nitrogen and methane, this effect does not occur which explains their low affinity. In consequence, Henry selectivities of 123 for CO2/N2 at 298 K and 12 for CO2/CH4 at 273 K were determined. The network was carefully characterized with solid-state nuclear magnetic resonance (NMR) and infrared (IR) spectroscopy, thermal gravimetry (TG) and elemental analyses as well as physisorption experiments with Ar, N2, CO2, CH4 and water.