Mucoadhesive nanoparticles as carrier systems for prolonged ocular delivery of gatifloxacin/prednisolone bitherapy

Polymers and their engineered analogues for ocular drug delivery: Enhancing therapeutic precision

Ocular drug delivery is constrained by anatomical and physiological barriers, necessitating innovative solutions for effective therapy. Natural polymers like hyaluronic acid, chitosan, and gelatin, alongside synthetic counterparts such as PLGA and PEG, have gained prominence for their biocompatibility and controlled release profiles. Recent strides in polymer conjugation strategies have enabled targeted delivery through ligand integration, facilitating tissue specificity and cellular uptake. This versatility accommodates combined drug delivery, addressing diverse anterior (e.g., glaucoma, dry eye) and posterior segment (e.g., macular degeneration, diabetic retinopathy) afflictions. The review encompasses an in-depth exploration of each natural and synthetic polymer, detailing their individual advantages and disadvantages for ocular drug delivery. By transcending ocular barriers and refining therapeutic precision, these innovations promise to reshape the management of anterior and posterior segment eye diseases.

Emphasis on Nanostructured Lipid Carriers in the Ocular Delivery of Antibiotics

BACKGROUND

Drug distribution to the eye is still tricky because of the eye's intricate structure. Systemic delivery, as opposed to more traditional methods like eye drops and ointments, is more effective but higher doses can be harmful.

OBJECTIVE

The use of solid lipid nanoparticles (SLNPs) as a method of drug delivery has been the subject of research since the 1990s. Since SLNPs are derived from naturally occurring lipids, they pose no health risks to the user. To raise the eye's absorption of hydrophilic and lipophilic drugs, SLNs can promote corneal absorption and improve the ocular bioavailability of SLNPs.

METHODS

To address problems related to ocular drug delivery, many forms of nano formulation were developed. Some of the methods developed are, emulsification and ultra-sonication, high-speed stirring and ultra-sonication, thin layer hydration, adapted melt-emulsification, and ultrasonication techniques, hot o/w micro-emulsion techniques, etc. Results: Nanostructured lipid carriers are described in this review in terms of their ocular penetration mechanism, structural characteristic, manufacturing process, characterization, and advantages over other nanocarriers.

CONCLUSION

Recent developments in ocular formulations with nanostructured bases, such as surfacemodified attempts have been made to increase ocular bioavailability in both the anterior and posterior chambers by incorporating cationic chemicals into a wide variety of polymeric systems.

Recent Advances of Ocular Drug Delivery Systems: Prominence of Ocular Implants for Chronic Eye Diseases

Chronic ocular diseases can seriously impact the eyes and could potentially result in blindness or serious vision loss. According to the most recent data from the WHO, there are more than 2 billion visually impaired people in the world. Therefore, it is pivotal to develop more sophisticated, long-acting drug delivery systems/devices to treat chronic eye conditions. This review covers several drug delivery nanocarriers that can control chronic eye disorders non-invasively. However, most of the developed nanocarriers are still in preclinical or clinical stages. Long-acting drug delivery systems, such as inserts and implants, constitute the majority of the clinically used methods for the treatment of chronic eye diseases due to their steady state release, persistent therapeutic activity, and ability to bypass most ocular barriers. However, implants are considered invasive drug delivery technologies, especially those that are nonbiodegradable. Furthermore, in vitro characterization approaches, although useful, are limited in mimicking or truly representing the in vivo environment. This review focuses on long-acting drug delivery systems (LADDS), particularly implantable drug delivery systems (IDDS), their formulation, methods of characterization, and clinical application for the treatment of eye diseases.

Drug Delivery for Ocular Allergy: Current Formulation Design Strategies and Future Perspectives

The incidences of ocular allergy have been growing with the increase in pollution. Because of challenges in new drug development, there have been efforts to maximize the efficacy of existing drugs through drug delivery approaches. The effectiveness of drugs in ophthalmic conditions is primarily determined by permeability across the barrier, corneal retention, and sustained release. Thus, there have been widespread efforts to optimize these parameters to enhance efficacy through novel formulations. This review aims to analyze the approaches to drug delivery systems to encourage further research to optimize effectiveness. With this objective, research on drug delivery aspects of anti-allergy therapeutics was included and analyzed based on formulation/drug delivery technique, Food and Drug Administration approval limits, residence time, compatibility, pre-clinical efficacy, and potential for translational application. Conventional eye drops have concerns such as poor residence time and ocular bioavailability. The novel formulations have the potential to improve residence and bioavailability. However, the use of preservatives and the lack of regulatory approval for polymers limit the translational application. The review may assist readers in identifying novel drug delivery strategies and their limitations for the development of effective ophthalmic formulations for the treatment of ocular allergy.

Hyaluronan Modulates the Biomechanical Properties of the Cornea

Purpose

Hyaluronan (HA) is a major constituent of the extracellular matrix (ECM) that has high viscosity and is essential for maintaining tissue hydration. In the cornea, HA is enriched in the limbal region and is a key component of the limbal epithelial stem cell niche. HA is upregulated after injury participating in the formation of the provisional matrix, and has a key role in regulating the wound healing process. This study investigated whether changes in the distribution of HA before and after injury affects the biomechanical properties of the cornea in vivo.

Methods

Corneas of wild-type (wt) mice and mice lacking enzymes involved in the biosynthesis of HA were analyzed before, immediately after, and 7 and 14 days after a corneal alkali burn (AB). The corneas were evaluated using both a ring light and fluorescein stain by in vivo confocal microscopy, optical coherence elastography (OCE), and immunostaining of corneal whole mounts.

Results

Our results show that wt mice and mice lacking HA synthase (Has)1 and 3 present an increase in corneal stiffness 7 and 14 days after AB without a significant increase in HA expression and absence of scarring at 14 days after AB. In contrast, mice lacking Has2 present a significant decrease in corneal stiffness, with a significant increase in HA expression and scarring at 14 days after AB.

Conclusions

Our findings show that the mechanical properties of the cornea are significantly modulated by changes in HA distribution following alkali burn.

Advances and future perspectives in epithelial drug delivery

Epithelial surfaces protect exposed tissues in the body against intrusion of foreign materials, including xenobiotics, pollen and microbiota. The relative permeability of the various epithelia reflects their extent of exposure to the external environment and is in the ranking: intestinal≈ nasal ≥ bronchial ≥ tracheal > vaginal ≥ rectal > blood-perilymph barrier (otic), corneal > buccal > skin. Each epithelium also varies in their morphology, biochemistry, physiology, immunology and external fluid in line with their function. Each epithelium is also used as drug delivery sites to treat local conditions and, in some cases, for systemic delivery. The associated delivery systems have had to evolve to enable the delivery of larger drugs and biologicals, such as peptides, proteins, antibodies and biologicals and now include a range of physical, chemical, electrical, light, sound and other enhancement technologies. In addition, the quality-by-design approach to product regulation and the growth of generic products have also fostered advancement in epithelial drug delivery systems.

Novel Drug Delivery Systems to Improve the Treatment of Keratitis

Keratitis is a disease characterized by inflammation of the cornea caused by different pathogens. It can cause serious visual morbidity if not treated quickly. Depending on the pathogen causing keratitis, eye drops containing antibacterial, antifungal, or antiviral agents such as besiloxacin, moxifloxacin, ofloxacin, voriconazol, econazole, fluconazole, and acyclovir are used, and these drops need to be applied frequently due to their low bioavailability. Studies are carried out on formulations with extended residence time in the cornea and increased permeability. These formulations include various new drug delivery systems such as inserts, nanoparticles, liposomes, niosomes, cubosomes, microemulsions, in situ gels, contact lenses, nanostructured lipid carriers, carbon quantum dots, and microneedles. Ex vivo and in vivo studies with these formulations have shown that the residence time of the active substances in the cornea is prolonged, and their ocular bioavailability is increased. In addition, in vivo studies have shown that these formulations successfully treat keratitis. However, it has been observed that fluoroquinolones are used in most of the studies; similar drug delivery systems are generally preferred for antifungal drugs, and studies for viral and acanthameba keratitis are limited. There is a need for new studies on different types of keratitis and different drug active substances. At the same time, proving the efficacy of drug delivery systems, which give promising results in in vivo animal models, with clinical studies is of great importance for progress in the treatment of keratitis.

Design of a Controlled-Release Delivery Composite of Antibacterial Agent Gatifloxacin by Spherical Silica Nanocarrier

In this study, a spherical silica nanoparticle was explored as a gatifloxacin carrier synthesized by the chemical precipitation method. It was found that there was no new chemical bond formation during the loading process between gatifloxacin and silica, which implies that the binding was driven by physical interaction. In addition, the drug loading and encapsulation efficiency could be improved by appropriately increasing nano-silica content in the loading process. Meanwhile, the release rate of gatifloxacin after loading nano-silica was also improved, suggesting the successful design of a controlled-release delivery composite. The silica nanocarrier could significantly improve the antibacterial performance of Escherichia coli by 2.1 times, which was higher than the pure gatifloxacin. The 24 h bacteriostatic rate was higher than that of a simple mixture of silica nanoparticles and gatifloxacin. Strong reactive oxygen species (ROS) in GAT-SiO₂ NPs suggests that ROS might be associated with bactericidal activity. The synergy between the physicochemical effect and ROS production of this material is proposed as the mechanism of its antibacterial activity, which can also be confirmed by the cell membrane damage observed under electron microscopy and DNA damage experiments. Collectively, our finding indicates that nano-silica microspheres could serve as a promising carrier for the sustained release of gatifloxacin, thereby providing a new carrier design scheme for the improvement of the antibacterial effect.

Hyaluronan-Cholesterol Nanogels for the Enhancement of the Ocular Delivery of Therapeutics

The anatomy and physiology of the eye strongly limit the bioavailability of locally administered drugs. The entrapment of therapeutics into nanocarriers represents an effective strategy for the topical treatment of several ocular disorders, as they may protect the embedded molecules, enabling drug residence on the ocular surface and/or its penetration into different ocular compartments. The present work shows the activity of hyaluronan-cholesterol nanogels (NHs) as ocular permeation enhancers. Thanks to their bioadhesive properties, NHs firmly interact with the superficial corneal epithelium, without penetrating the stroma, thus modifying the transcorneal penetration of loaded therapeutics. Ex vivo transcorneal permeation experiments show that the permeation of hydrophilic drugs (i.e., tobramycin and diclofenac sodium salt), loaded in NHs, is significantly enhanced when compared to the free drug solutions. On the other side, the permeation of hydrophobic drugs (i.e., dexamethasone and piroxicam) is strongly dependent on the water solubility of the entrapped molecules. The obtained results suggest that NHs formulations can improve the ocular bioavailability of the instilled drugs by increasing their preocular retention time (hydrophobic drugs) or facilitating their permeation (hydrophilic drugs), thus opening the route for the application of HA-based NHs in the treatment of both anterior and posterior eye segment diseases.

Cationic Polymeric Nanoparticles for Improved Ocular Delivery and Antimycotic Activity of Terconazole

Terconazole (TCZ) is a broad-spectrum antifungal triazole that is particularly active against Candida species, but its poor water solubility hinders its ocular absorption and restricts its application. This study aims to fabricate TCZ-loaded cationic polymeric nanoparticles to enhance the ocular delivery and antimycotic activity of terconazole. TCZ-loaded nanoparticles were developed by nanoprecipitation method employing Eudragit RLPO®. They were characterized by entrapment efficiency (EE%), particle size (PS), zeta potential (ZP), morphology, Fourier transform infrared spectroscopy (FT-IR), and X-ray powder diffraction (XRPD). In-vitro antimycotic activity was evaluated by measuring zone of inhibition (ZI), minimum inhibitory concentration (MIC) and minimum fungicidal concentration (MFC). The developed nanoparticles were spherical with moderate to high EE% (44.03-71.14%), a nanometric PS (49.41-78.72 nm), and a positively charged ZP (≥ +21.47). In-vitro release studies revealed sustained release of drug up to 24 h. FT-IR of TCZ-loaded nanoparticles revealed distinctive peaks for Eudragit RLPO® and Poloxamer-188, with disappearance of the TCZ characteristic peaks. XRPD revealed the amorphous state of TCZ within the polymer matrix. Mucoadhesive studies proved the mucoadhesive property of the developed TCZ nanoparticles. In-vitro antimycotic studies, assessed by ZI, MIC and MFC, revealed enhanced antimycotic activity of TCZ-loaded nanoparticles against Candida albicans, relative to plain TCZ. No irritation or abnormal changes to the rabbits' eyes for plain and medicated polymeric nanoparticles were found by the in-vivo Draize test. These findings reveal that the cationic polymeric nanoparticles can be regarded as a potential drug delivery system for enhancing the ocular antimycotic activity of TCZ.

Preparation and characterization of Eudragit L 100-55/chitosan enteric nanoparticles containing omeprazole using general factorial design: in vitro/in vivo study

Background and purpose:

Omeprazole (OMP) is broadly used for the treatment of gastroesophageal reflux and other acid-related diseases. The current study aimed to prepare enteric-coated nanoparticles containing OMP to achieve a stable powder formulation easily prescribed in children.

Experimental approach:

The nanoparticles were formed by complex coacervation method using chitosan (CTS) and Eudragit L100/55 (EU) and the impact of various formulation variables (the concentrations of EU solution and its volume ratio to CTS solution) were assessed using 3² fractional design. The mean particle size (PS), zeta potential (ZP), encapsulation efficiency (EE), and drug loading (DL) were determined. Finally, the pharmacological effects of the optimized OMP enteric nanoparticles were evaluated by an in vivo antiulcer study using Sprague-Dawley rats.

Findings/Results:

The highest desirability value was for formulation F5 (containing EU concentration 4 mg/mL and EU/CTS volume ratio 2:1). PS, ZP, EE, and DL of the optimized OMP-loaded nanoparticles were confirmed 810 ± 14 nm, -38.2 ± 1.8 mV, 83.1± 4.2%, and 13.1± 1.5%, respectively. in vitro release studies showed the pH sensitivity of nanoparticles and OMP release was pH-dependent. in vivo pharmacological assessment revealed that the optimized formulation was able to protect rat stomach against ulcer formation induced by indomethacin compared to the group that received normal saline which demonstrated severe peptic ulcer and hemorrhagic spots.

Conclusion and implication:

Our results indicated that the enteric EU/CTS nanoparticles were successfully prepared via a complex coacervation method and their efficacy could be comparable with commercial OMP pellets.

Formulation and Evaluation of Resveratrol Loaded Cubosomal Nanoformulation for Topical Delivery

AIM

The aim of the study was to formulate, characterize, and evaluate the Resveratrol- loaded Cubosomes (RC) for topical application.

BACKGROUND

Resveratrol (RV) is a nutraceutical compound with exciting pharmacological potential in different diseases, including cancers. Many studies on resveratrol have been reported for anti- melanoma activity. Due to its low bioavailability, the therapeutic activities of resveratrol are strongly limited. Hence, an approach with nanotechnology has been made to increase its activity through transdermal drug delivery.

OBJECTIVE

To formulate, characterize, and evaluate the resveratrol-loaded cubosomes (RC). To evaluate Resveratrol-loaded Cubosomal Gel (RC-Gel) for its topical application.

METHODS

RC was formulated by homogenization technique and optimized using a 2-factor 3-level factorial design. Formulated RCs were characterized for particle size, zeta potential, and entrapment efficiency. Optimized RC was evaluated for in vitro release and stability study. Optimized RC was further formulated into cubosomal gel (RC-Gel) using carbopol and evaluated for drug permeation and deposition. Furthermore, developed RC-Gel was evaluated for its topical application using skin irritancy, toxicity, and in vivo local bioavailability studies.

RESULTS

The optimized RC indicated cubic-shaped structure with mean particle size, entrapment efficiency, and zeta potential were 113±2.36 nm, 85.07 ± 0.91%, and -27.40 ± 1.40 mV, respectively. In vitro drug release of optimized RC demonstrated biphasic drug release with the diffusion-controlled release of resveratrol (RV) (87.20 ± 3.91%). The RC-Gel demonstrated better drug permeation and deposition in mice skin layers. The composition of RC-Gel has been proved non-irritant to mice skin. In vivo local bioavailability study depicted the good potential of RC-Gel for skin localization.

CONCLUSION

The RC nanoformulation proposes a promising drug delivery system for melanoma treatment simply through topical application.

Effective Ocular Delivery of Eplerenone Using Nanoengineered Lipid Carriers in Rabbit Model

Background

Eplerenone (Epl) is a selective mineralocorticoid-receptor antagonist used for chronic central serous chorioretinopathy treatment. Our goal was to enhance the corneal performance of Epl-loaded nanostructured lipid carriers (NLCs) through surface modification using different coating polymers.

Methods

Epl-loaded modified NLCs (Epl-loaded MNLCs) were prepared by coating the surface of Epl-loaded NLCs using different polymers, namely hyaluronic acid, chitosan oligosaccharide lactate, and hydrogenated collagen. A 3¹×4¹ full factorial design was used to evaluate the effect of the surface modification on the properties of the prepared systems. Selected optimal Epl-loaded MNLCs were further evaluated for in vitro drug release, morphology, pH, rheological properties, corneal mucoadhesion, irritation, and penetration.

Results

Epl-loaded MNLCs were successfully prepared with high drug-entrapment efficiency and nanosized particles with low size distribution. Transmission electron microscopy revealed nanosized spherical particles surrounded by a coating layer of the surface modifier. The pH, refractive index, and viscosity results of the Epl-loaded MNLCs confirmed the ocular compatibility of the systems with no blurring of vision. The safety and ocular tolerance of the optimal MNLCs were confirmed using the hen’s egg test on chorioallantoic membrane and by histopathological evaluation of rabbit eyes treated with the optimal systems. Confocal laser-scanning microscopy of corneal surfaces confirmed successful transcorneal permeation of the Epl-loaded MNLCs compared to the unmodified Epl-loaded NLCs, revealed by higher corneal fluorescence intensity at all time intervals.

Conclusion

Overall, the results confirmed the potential of Epl-loaded MNLCs as a direct approach for Epl ocular delivery.

Colloidal nanosystems with mucoadhesive properties designed for ocular topical delivery

Over the last years, the scientific interest about topical ocular delivery targeting the posterior segment of the eye has been increasing. This is probably due to the fact that this is a non-invasive administration route, well tolerated by patients and with fewer local and systemic side effects. However, it is a challenging task due to the external ocular barriers, tear film clearance, blood flow in the conjunctiva and choriocapillaris and due to the blood-retinal barriers, amongst other features. An enhanced intraocular bioavailability of drugs can be achieved by either improving corneal permeability or by improving precorneal retention time. Regarding this last option, increasing residence time in the precorneal area can be achieved using mucoadhesive polymers such as xyloglucan, poly(acrylate), hyaluronic acid, chitosan, and carbomers. On the other hand, colloidal particles can interact with the ocular mucosa and enhance corneal and conjunctival permeability. These nanosystems are able to deliver a wide range of drugs, including macromolecules, providing stability and improving ocular bioavailability. New pharmaceutical approaches based on nanotechnology associated to bioadhesive compounds have emerged as strategies for a more efficient treatment of ocular diseases. Bearing this in mind, this review provides an overview of the current mucoadhesive colloidal nanosystems developed for ocular topical administration, focusing on their advantages and limitations.

Microbial Fabricated Nanosystems: Applications in Drug Delivery and Targeting

The emergence of nanosystems for different biomedical and drug delivery applications has drawn the attention of researchers worldwide. The likeness of microorganisms including bacteria, yeast, algae, fungi, and even viruses toward metals is well-known. Higher tolerance to toxic metals has opened up new avenues of designing microbial fabricated nanomaterials. Their synthesis, characterization and applications in bioremediation, biomineralization, and as a chelating agent has been well-documented and reviewed. Further, these materials, due to their ability to get functionalized, can also be used as theranostics i.e., both therapeutic as well as diagnostic agents in a single unit. Current article attempts to focus particularly on the application of such microbially derived nanoformulations as a drug delivery and targeting agent. Besides metal-based nanoparticles, there is enough evidence wherein nanoparticles have been formulated using only the organic component of microorganisms. Enzymes, peptides, polysaccharides, polyhydroxyalkanoate (PHA), poly-(amino acids) are amongst the most used biomolecules for guiding crystal growth and as a capping/reducing agent in the fabrication of nanoparticles. This has promulgated the idea of complete green chemistry biosynthesis of nano-organics that are most sought after in terms of their biocompatibility and bioavailability.

Preparation, characterization and in vitro antitumor activity evaluation of hyaluronic acid-alendronate-methotrexate nanoparticles

As an anti-metabolic drug, methotrexate (MTX) plays an important role in the treatment of various malignant tumors. However, several side effects such as low selectivity and high toxic of MTX limited its further applications. With aims to increase its accumulation in the tumor sites and reduce the toxicity of normal tissue nonspecific uptake, a self-assembled hyaluronic acid-alendronate-methotrexate nanoparticle (HA-ALN-MTX NPs) with a dual-tumor-targeted drug loaded system was designed and synthesized with an average particle size of 265.6 ± 13.3 nm. The advantage of this nanosystem is that the anticancer drug MTX can be used as a tumor-targeted ligand for folate acid receptors (FA), and hyaluronic acid (HA) can be used as another tumor targeted ligand for CD44 receptors. In vitro experiments confirmed that HA-ALN-MTX NPs has lower toxic effect on normal tissue cells HUVECs and has relatively high proliferation inhibition effect on tumor cells A549. Moreover, the inhibition effect could be adjusted by altering the dose of given drugs. All these results revealed that the prepared HA-ALN-MTX NPs could be selectively taken up by tumor cells by FA and CD44 receptor-mediated endocytosis. Therefore, self-assembled HA-ALN-MTX NPs targeted by these FA/CD44 receptors for anticancer drugs could act as effective antitumor drugs.

Recent Advances in the Design of Topical Ophthalmic Delivery Systems in the Treatment of Ocular Surface Inflammation and Their Biopharmaceutical Evaluation

Ocular inflammation is one of the most common symptom of eye disorders and diseases. The therapeutic management of this inflammation must be rapid and effective in order to avoid deleterious effects for the eye and the vision. Steroidal (SAID) and non-steroidal (NSAID) anti-inflammatory drugs and immunosuppressive agents have been shown to be effective in treating inflammation of the ocular surface of the eye by topical administration. However, it is well established that the anatomical and physiological ocular barriers are limiting factors for drug penetration. In addition, such drugs are generally characterized by a very low aqueous solubility, resulting in low bioavailability as only 1% to 5% of the applied drug permeates the cornea. The present review gives an updated insight on the conventional formulations used in the treatment of ocular inflammation, i.e., ointments, eye drops, solutions, suspensions, gels, and emulsions, based on the commercial products available on the US, European, and French markets. Additionally, sophisticated formulations and innovative ocular drug delivery systems will be discussed. Promising results are presented with micro- and nanoparticulated systems, or combined strategies with polymers and colloidal systems, which offer a synergy in bioavailability and sustained release. Finally, different tools allowing the physical characterization of all these delivery systems, as well as in vitro, ex vivo, and in vivo evaluations, will be considered with regards to the safety, the tolerance, and the efficiency of the drug products.

Chemical and Microstructural Characterization of pH and [Ca2+] Dependent Sol-Gel Transitions in Mucin Biopolymer

Mucus is responsible for controlling transport and barrier function in biological systems, and its properties can be significantly affected by compositional and environmental changes. In this study, the impacts of pH and CaCl₂ were examined on the solution-to-gel transition of mucin, the primary structural component of mucus. Microscale structural changes were correlated with macroscale viscoelastic behavior as a function of pH and calcium addition using rheology, dynamic light scattering, zeta potential, surface tension, and FTIR spectroscopic characterization. Mucin solutions transitioned from solution to gel behavior between pH 4–5 and correspondingly displayed a more than ten-fold increase in viscoelastic moduli. Addition of CaCl₂ increased the sol-gel transition pH value to ca. 6, with a twofold increase in loss moduli at low frequencies and ten-fold increase in storage modulus. Changing the ionic conditions—specifically [H⁺] and [Ca²⁺] —modulated the sol-gel transition pH, isoelectric point, and viscoelastic properties due to reversible conformational changes with mucin forming a network structure via  non-covalent cross-links between mucin chains.

Development of Polyelectrolyte Complex Nanoparticles-PECNs Loaded with Ampicillin by Means of Polyelectrolyte Complexation and Ultra-High Pressure Homogenization (UHPH)

This study was focused on synthesizing, characterizing and evaluating the biological potential of Polyelectrolyte Complex Nanoparticles (PECNs) loaded with the antibiotic ampicillin. For this, the PECNs were produced initially by polyelectrolytic complexation (bottom-up method) and subsequently subjected to ultra-high pressure homogenization-UHPH (top-down method). The synthetic polymeric materials corresponding to the sodium salt of poly(maleic acid-alt-octadecene) (PAM-18Na) and the chloride salt of Eudragit E-100 (EuCl) were used, where the order of polyelectrolyte complexation, the polyelectrolyte ratio and the UHPH conditions on the PECNs features were evaluated. Likewise, PECNs were physicochemically characterized through particle size, polydispersity index, zeta potential, pH and encapsulation efficiency, whereas the antimicrobial effect was evaluated by means of the broth microdilution method employing ampicillin sensitive and resistant S. aureus strains. The results showed that the classical method of polyelectrolyte complexation (bottom-up) led to obtain polymeric complexes with large particle size and high polydispersity, where the 1:1 ratio between the titrant and receptor polyelectrolyte was the most critical condition. In contrast, the UHPH technique (top-down method) proved high performance to produce uniform polymeric complexes on the nanometric scale (particle size < 200 nm and PDI < 0.3). Finally, it was found there was a moderate increase in antimicrobial activity when ampicillin was loaded into the PECNs.

Expedition of Eudragit® Polymers in the Development of Novel Drug Delivery Systems

Eudragit® polymer has been widely used in film-coating for enhancing the quality of products over other materials (e.g., shellac or sugar). Eudragit® polymers are obtained synthetically from the esters of acrylic and methacrylic acid. For the last few years, they have shown immense potential in the formulations of conventional, pH-triggered, and novel drug delivery systems for incorporating a vast range of therapeutics including proteins, vitamins, hormones, vaccines, and genes. Different grades of Eudragit® have been used for designing and delivery of therapeutics at a specific site via the oral route, for instance, in stomach-specific delivery, intestinal delivery, colon-specific delivery, mucosal delivery. Further, these polymers have also shown their great aptitude in topical and ophthalmic delivery. Moreover, available literature evidences the promises of distinct Eudragit® polymers for efficient targeting of incorporated drugs to the site of interest. This review summarizes some potential researches that are being conducted by eminent scientists utilizing the distinct grades of Eudragit® polymers for efficient delivery of therapeutics at various sites of interest.

Nanosphere-shaped ammonio methacrylate copolymers: converting a pharmaceutical inactive ingredient to efficient therapeutics for experimental colitis

Inflammatory bowel disease (IBD) refers to progressive inflammatory disorders that impair the gastrointestinal tract's structure and function. Given their selective accumulation in inflamed tissues, nanoparticles are promising drug delivery systems for IBD treatment. The hypothesis here was that drug-free nanoscaled cationic ammonio methacrylate copolymers (AMCNP) may have a beneficial therapeutic effect in murine TNBS-induced colitis. Type A and B AMCNP (RLNP and RSNP, respectively) were prepared and characterized in vitro, and were rectally administered in two concentrations (5 and 25 mg ml^-1) for the treatment of two grades of murine experimental colitis. The impact of the nanoparticles upon the inflammatory markers, circulating LPS, intestinal permeability and colonic leukocyte populations was examined. Both RLNP and RSNP led to a significant mitigation of mild to moderate experimental colitis, as evident from the substantial reduction of myeloperoxidase (MPO) and alkaline phosphatase (AP) activities (more than two-fold, P < 0.05) and various pro-inflammatory cytokine concentrations (TNF-α, IL-1β, IL-6, IL-12). The best therapeutic efficiency was observed when the particles were used at 5 mg ml^-1, while the more cationic RLNP performed superior. When used against a severe grade of colitis, RLNP (5 mg ml^-1) resulted in a significant decrease of tissue MPO and TNF-α. It was found that treatment with AMCNP resulted in significant intestinal immune cell depletion, intestinal barrier function improvement, and 1.5-2.5 times reduction of the systemic endotoxin concentration. These findings highlighted the fact that nanoscaling endows the cationic amphiphilic AMCs unique therapeutic properties, which help mitigate murine experimental colitis in the absence of any drug load. The results also provided a glimpse of possible underlying mechanisms through which nanoscaled AMCs might have exerted their therapeutic effect within this context.

Eudragit RL100 Based Moxifloxacin Hydrochloride and Ketorolac Tromethamine Combination Nanoparticulate System for Ocular Drug Delivery

BACKGROUND

Bacterial conjunctivitis is a serious ocular infection if left untreated. It is caused by several species of bacteria like Pseudomonas, Staphylococcus and Mycobacterium.

OBJECTIVE

The present investigation explores the development and characterization of moxifloxacin hydrochloride and ketorolac tromethamine combination loaded Eudragit RL 100 nanosuspension for ocular drug delivery in order to overcome the problems associated with conventional dosage forms.

METHODS

The nanosuspension prepared by nanoprecipitation technique showed successful entrapment of both water-soluble drugs in the polymer matrix indicated by their % entrapment efficiencies.

RESULTS

Formulations showed a mean particle size <200 nm with narrow size distribution and positive surface charge due to the presence of quaternary ammonium groups of Eudragit RL100. FTIR study revealed compatibility among the components, while a reduction in the crystallinity of formulation was observed in the PXRD study. The release of both the drugs was found to be sustained in nanosuspension as compared to commercial eyedrops. Ex vivo studies showed increased transcorneal permeation of drugs from nanosuspension, where approximately 2.5-fold and 2-fold increase in the permeation was observed for moxifloxacin hydrochloride and ketorolac tromethamine, respectively. The formulation was stable at 4°C and room temperature.

CONCLUSION

Due to their sustained release, positive surface charge and higher transcorneal permeation, this will be a promising ocular drug delivery.

Advances and limitations of drug delivery systems formulated as eye drops

Topical instillation of eye drops remains the most common and easiest route of ocular drug administration, representing the treatment of choice for many ocular diseases. Nevertheless, low ocular bioavailability of topically applied drug molecules can considerably limit their efficacy. Over the last several decades, numerous drug delivery systems (DDS) have been developed in order to improve drug bioavailability on the ocular surfaces. This review systematically covers the most recent advances of DDS applicable by topical instillation, that have shown better performance in in vivo models compared to standard eye drop formulations. These delivery systems are based on in situ forming gels, nanoparticles and combinations of both. Most of the DDS have been developed using natural or synthetic polymers. Polymers offer many advantageous properties for designing advanced DDS including biocompatibility, gelation properties and/or mucoadhesiveness. However, despite the high number of studies published over the last decade, there are several limitations for clinical translation of DDS. This review article focuses on the recent advances for the development of ocular drug delivery systems. In addtion, the potential challenges for commercialization of new DDS are presented.

Preparation and Evaluation of Eudragit® L100 Nanoparticles Loaded Impregnated with KT Tromethamine Loaded PVA -HEC Insertions for Ophthalmic Drug Delivery

Purpose: The purpose of the present study was to improve the ocular delivery for ketorolac tromethamine (KT) used to treat inflammation of the eye.

Methods: Eudragit nanoparticles loaded with KT were prepared and incorporated in polyvinyl alcohol (PVA) and hydroxyethyl cellulose (HEC) films. Nanoparticles were characterized by Fourier transform-infrared (FT-IR), scanning electron microscopy (SEM). Physicochemical properties and encapsulation effciency were investigated for nanoparticles. Also, the inserts were evaluated for their physiochemical parameters like percentage moisture absorption, percentage moisture loss, thickness and folding endurance.

Results: Mean particle size and zeta potential were in range of 153.8-217 nm and (-10.8) - (-40.7) mV, respectively. The results show that the use of a surfactant has not led to any major change on drug loading. The loading increases with the amount of polymer. The insert had a thickness varying from 0.072 ± 0.0098 to 0.0865 ± 0.0035 mm. The thicknesses of the inserts and the folding endurance increased with the total polymer concentration. The physicochemical properties showed that the Eudragit® L-100 nanoparticles loaded PVA-HEC films could be an effective carrier for KT.

Conclusion: For the first time, inserts of Eudragit nanoparticles were successfully prepared for ophthalmic drug delivery system to prevent frequent drug administration and enhance patient compliance.

Ultrasound-assisted gatifloxacin delivery in mouse cornea, in vivo

Gatifloxacin is a 4th generation fluoroquinolone antibiotic used in the clinic to treat ocular infection. One limitation of gatifloxacin is its relatively poor corneal penetration, and the increase of its trans-corneal delivery would be beneficial to reduce the amount or frequency of daily dose. In this study, ultrasound treatment was applied to enhance the trans-corneal delivery of gatifloxacin without damage. Experiments were conducted on mouse eyes in ex vivo and in vivo conditions. Ultrasound waves with 1 MHz in frequency, 1.3 W/cm² in intensity were applied onto the mouse cornea for 5 minutes, and then gatifloxacin ophthalmic solution was instilled and left there for 10 minutes. 3D gatifloxacin distribution in the cornea was measured by two-photon microscopy (TPM) imaging based on its intrinsic fluorescence. Longitudinal TPM imaging of ultrasound treated mouse corneas showed the increase of initial gatifloxacin intensities on the corneal surface compared to untreated mouse corneas by 67%, and then the increased gatifloxacin delivery into the cornea from the surface at later time. The delivered gatifloxacin in the corneal epithelium stayed longer in the ultrasound treated corneas than in the untreated corneas. The enhanced trans-corneal delivery and extended stay of gatifloxacin in the mouse cornea by ultrasound treatment could be beneficial for therapeutic effects. This study demonstrated the detail process of enhanced trans-corneal gatifloxacin delivery by ultrasound treatment.

Advanced Formulation Approaches for Ocular Drug Delivery: State-Of-The-Art and Recent Patents

The eye presents extensive perspectives and challenges for drug delivery, mainly because of the extraordinary capacity, intrinsic to this path, for drugs to permeate into the main circulatory system and also for the restrictions of the ocular barriers. Depending on the target segment of the eye, anterior or posterior, the specifications are different. The ocular route experienced in the last decades a lot of progresses related with the development of new drugs, improved formulations, specific-designed delivery and even new routes to administer a drug. Concomitantly, new categories of materials were developed and adapted to encapsulate drugs. With such advances, a multiplicity of parameters became possible to be optimized as the increase in bioavailability and decreased toxic effects of medicines. Also, the formulations were capable to easily adhere to specific tissues, increase the duration of the therapeutic effect and even target the delivery of the treatment. The ascending of new delivery systems for ocular targeting is a current focus, mainly because of the capacity to extend the normal time during which the drug exerts its therapeutic effect and, so, supplying the patients with a product which gives them fewer side effects, fewer number of applications and even more effective outcomes to their pathologies, surpassing the traditionally-used eye drops. Depending on the systems, some are capable of increasing the duration of the drug action as gels, emulsions, prodrugs, liposomes, and ocular inserts with hydrophilic properties, improving the absorption by the cornea. In parallel, other devices use as a strategy the capacity to sustain the release of the carried drugs by means of erodible and non-erodible matrices. This review discusses the different types of advanced formulations used for ocular delivery of therapeutics presenting the most recent patents according to the clinical applications.

Ocular Drug Delivery

Although the eye is an accessible organ for direct drug application, ocular drug delivery remains a major challenge due to multiple barriers within the eye. Key barriers include static barriers imposed by the cornea, conjunctiva, and retinal pigment epithelium and dynamic barriers including tear turnover and blood and lymphatic clearance mechanisms. Systemic administration by oral and parenteral routes is limited by static blood-tissue barriers that include epithelial and endothelial layers, in addition to rapid vascular clearance mechanisms. Together, the static and dynamic barriers limit the rate and extent of drug delivery to the eye. Thus, there is an ongoing need to identify novel delivery systems and approaches to enhance and sustain ocular drug delivery. This chapter summarizes current and recent experimental approaches for drug delivery to the anterior and posterior segments of the eye.

Mathematical Modeling of Release Kinetics from Supramolecular Drug Delivery Systems

Embedding of active substances in supramolecular systems has as the main goal to ensure the controlled release of the active ingredients. Whatever the final architecture or entrapment mechanism, modeling of release is challenging due to the moving boundary conditions and complex initial conditions. Despite huge diversity of formulations, diffusion phenomena are involved in practically all release processes. The approach in this paper starts, therefore, from mathematical methods for solving the diffusion equation in initial and boundary conditions, which are further connected with phenomenological conditions, simplified and idealized in order to lead to problems which can be analytically solved. Consequently, the release models are classified starting from the geometry of diffusion domain, initial conditions, and conditions on frontiers. Taking into account that practically all solutions of the models use the separation of variables method and integral transformation method, two specific applications of these methods are included. This paper suggests that "good modeling practice" of release kinetics consists essentially of identifying the most appropriate mathematical conditions corresponding to implied physicochemical phenomena. However, in most of the cases, models can be written but analytical solutions for these models cannot be obtained. Consequently, empiric models remain the first choice, and they receive an important place in the review.

Fourth-Generation Antibiotic Gatifloxacin Encapsulated by Microemulsions: Structural and Probing Dynamics

To overcome the increased disease rate, utilization of the versatile broad spectrum antibiotic drugs in controlled drug-delivery systems has been a challenging and complex consignment. However, with the development of microemulsion (μE)-based formulations, drugs can be effectively encapsulated and transferred to the target source. Herein, two biocompatible oil-in-water (o/w) μE formulations comprising clove oil/Tween 20/ethylene glycol/water (formulation A) and clove oil/Tween 20/1-butanol/water (formulation B) were developed for encapsulating the gatifloxacin (GTF), a fourth-generation antibiotic. The pseudoternary phase diagrams were mapped at a constant surfactant/co-surfactant (1:1) ratio to bound the existence of a monophasic isotropic region for as-formulated μEs. Multiple complementary characterization techniques, namely, conductivity (σ), viscosity (η), and optical microscopy analyses, were used to study the gradual changes that occurred in the microstructure of the as-formulated μEs, indicating the presence of a percolation transformation to a bicontinuous permeate flow. GTF showed good solubility, 3.2 wt % at pH 6.2 and 4.0 wt % at pH 6.8, in optimum μE of formulation A and formulation B, respectively. Each loaded μE formulation showed long-term stability over 8 months of storage. Moreover, no observable aggregation of GTF was found, as revealed by scanning transmission electron microscopy and peak-to-peak correlation of IR analysis, indicating the stability of GTF inside the formulation. The average particle size of each μE, measured by dynamic light scattering, increased upon loading GTF, intending the accretion of drug in the interfacial layers of microdomains. Likewise, fluorescence probing sense an interfacial hydrophobic environment to GTF molecules in any of the examined formulations, which may be of significant interest for understanding the kinetics of drug release.

Ocular Drug Delivery Barriers-Role of Nanocarriers in the Treatment of Anterior Segment Ocular Diseases

Ocular drug delivery is challenging due to the presence of anatomical and physiological barriers. These barriers can affect drug entry into the eye following multiple routes of administration (e.g., topical, systemic, and injectable). Topical administration in the form of eye drops is preferred for treating anterior segment diseases, as it is convenient and provides local delivery of drugs. Major concerns with topical delivery include poor drug absorption and low bioavailability. To improve the bioavailability of topically administered drugs, novel drug delivery systems are being investigated. Nanocarrier delivery systems demonstrate enhanced drug permeation and prolonged drug release. This review provides an overview of ocular barriers to anterior segment delivery, along with ways to overcome these barriers using nanocarrier systems. The disposition of nanocarriers following topical administration, their safety, toxicity and clinical trials involving nanocarrier systems are also discussed.

Ophthalmic Drug Delivery Systems for Antibiotherapy-A Review

The last fifty years, ophthalmic drug delivery research has made much progress, challenging scientists about the advantages and limitations of this drug delivery approach. Topical eye drops are the most commonly used formulation in ocular drug delivery. Despite the good tolerance for patients, this topical administration is only focus on the anterior ocular diseases and had a high precorneal loss of drugs due to the tears production and ocular barriers. Antibiotics are popularly used in solution or in ointment for the ophthalmic route. However, their local bioavailability needs to be improved in order to decrease the frequency of administrations and the side effects and to increase their therapeutic efficiency. For this purpose, sustained release forms for ophthalmic delivery of antibiotics were developed. This review briefly describes the ocular administration with the ocular barriers and the currently topical forms. It focuses on experimental results to bypass the limitations of ocular antibiotic delivery with new ocular technology as colloidal and in situ gelling systems or with the improvement of existing forms as implants and contact lenses. Nanotechnology is presently a promising drug delivery way to provide protection of antibiotics and improve pathway through ocular barriers and deliver drugs to specific target sites.

Mucus-penetrating solid lipid nanoparticles for the treatment of cystic fibrosis: Proof of concept, challenges and pitfalls

Nanocarrier-mediated transmucosal drug delivery based on conventional mucoadhesive, muco-inert or mucus-penetrating nanoparticles (NPs) is a growing field especially in challenging diseases like cystic fibrosis (CF). Efficacy of such systems dictates profound investigation of particle-mucus interaction and factors governing the whole process. Although variable techniques studying particle diffusion in mucus have been introduced, standardized procedures are lacking. The study comprised different methods based on micro- and macro-displacement as well as colloidal stability and turbidimetric experiments. Artificial sputum medium (ASM), CF sputum and mucus-secreting cell line (Calu-3 air interface culture, AIC) were applied. Solid lipid nanoparticles (SLNs) coated with variable hydrophilic sheath (poloxamer, Tween 80 or PVA) represented the nanocarriers under investigation. Both micro-displacement studies based on single particle tracking and macro-displacement experiments based on 3D-time laps confocal imaging revealed faster diffusion of poloxamer- > Tween- > PVA-coated SLNs. Compared to ASM, CF sputum showed not only lower diffusion rates but also remarkable discrepancies in particle-mucus diffusion rate due to sputum heterogenicity. Meanwhile, in case of Calu-3 AIC, thickness of the mucosal layer as well as density of mucus network were key determinants in the diffusion process. The points emphasized in this study highlight the road towards in vivo relevant particle-mucus interaction research.

Nanoparticles for drug delivery to the anterior segment of the eye

Commercially available ocular drug delivery systems are effective but less efficacious to manage diseases/disorders of the anterior segment of the eye. Recent advances in nanotechnology and molecular biology offer a great opportunity for efficacious ocular drug delivery for the treatments of anterior segment diseases/disorders. Nanoparticles have been designed for preparing eye drops or injectable solutions to surmount ocular obstacles faced after administration. Better drug pharmacokinetics, pharmacodynamics, non-specific toxicity, immunogenicity, and biorecognition can be achieved to improve drug efficacy when drugs are loaded in the nanoparticles. Despite the fact that a number of review articles have been published at various points in the past regarding nanoparticles for drug delivery, there is not a review yet focusing on the development of nanoparticles for ocular drug delivery to the anterior segment of the eye. This review fills in the gap and summarizes the development of nanoparticles as drug carriers for improving the penetration and bioavailability of drugs to the anterior segment of the eye.

Sponge like microparticles for drug delivery and cosmeto-textile use: Formulation and human skin penetration

This unique work is targeted to achieve three main goals: i) to enhance the aqueous solubility of three specifically selected hydrophobic active agents, ii) to prepare such polymeric biodegradable microparticles which can encapsulate actives-cyclodextrin complexes and iii) to functionalize a polyamide base textile with active loaded microparticles and active-cyclodextrin loaded microparticles. To achieve this objective, biodegradable cationic microparticles were prepared via double emulsion solvent evaporation process and were loaded with hydroxypropyl-beta-cyclodextrin based complexes of Indomethacin, α-tocopheroland Lauryl Isoquinolinium Bromide during the formulation process. Inclusion complex based particles were evaluated for their morphology, size distribution, zeta potential, skin penetration aptitude and adsorption onto a selected textile. It was observed that active-cyclodextrin complex encapsulation do not affect the morphology, size and zeta potential of the microparticles as well as adsorption of the microparticles onto textile remains unaltered. However such active-cyclodextrin complex encapsulated particles provided the enhancement in the aqueous solubility of hydrophobic agents and also provided prolonged release formulations.

Ocular Disposition of ∆8-Tetrahydrocannabinol from Various Topical Ophthalmic Formulations

The purposes of this project are to enhance the trans-membrane penetration of Δ⁸-Tetrahydrocannabinol (Δ⁸-THC) and to study the effect of various lipid based systems in delivering the compound, non-invasively, to anterior and posterior ocular chambers. Solid lipid nanoparticles (SLNs), fast gelling films were manufactured using high pressure homogenization and melt cast techniques, respectively. The formulations were characterized for drug content, entrapment efficiency, particle size and subsequently evaluated in vitro for trans-corneal permeation. In vivo, the drug disposition was tested via topical administration in albino rabbits. The eye globes were enucleated at the end of experiment and tissues were analyzed for drug content. All formulations showed favorable physicochemical characteristics in terms of particle size, entrapment efficiency, and drug content. In vitro, the formulations exhibited a transcorneal flux that depended on the formulation's drug load. An increase in drug load from 0.1 to 0.75% resulted in 12- to16-folds increase in permeation. In vivo, the film was able to deliver THC to all the tissues with high accumulations in cornea and sclera. The SLNs showed a greater ability in delivering THC to all the tissues, at a significantly lower drug load, due to their colloidal size range, which in turn enhanced corneal epithelial membrane penetration. The topical formulations evaluated in the present study were able to successfully deliver Δ⁸-THC in therapeutically meaningful concentrations (EC₅₀ values for CB₁: 6 nM and CB₂: 0.4 nM) to all ocular tissues except the vitreous humor, with pronounced tissue penetration achieved using SLNs as a Δ⁸-THC delivery vehicle.

Review: Emerging strategies for antimicrobial drug delivery to the ocular surface: Implications for infectious keratitis

Infectious keratitis is a medical emergency that can cause severe visual morbidity if not treated promptly. Depending upon the causative microorganism, effective management of infectious keratitis requires frequent application of antibacterial, antifungal, or antiviral eye drops, which may have low bioavailability, undesirable side effects, and poor patient compliance. Ocular formulations of antimicrobials that can increase corneal permeation and provide extended presence on ocular surface are being developed. Such formulations include nanoparticles, mucoadhesives, in situ forming hydrogels, and contact lenses. Testing of these formulations in in vitro models and ex vivo excised corneas, and in vivo rabbit testing have demonstrated increased bioavailability and extended presence on the cornea. Many of these formulations have also demonstrated success in treating infectious keratitis in animal models. However, the majority of studies have evaluated fluoroquinolone antibacterials, and more studies are needed to test the delivery of antifungal drugs. Moreover, additional efficacy data in animal models and future studies in humans to determine the duration of inhibitory concentrations of these antimicrobials in tear fluid will be required to prove the effectiveness of these formulations for clinical management of infectious keratitis.

Hyaluronan as a promising excipient for ocular drug delivery

Hyaluronan (HA) is a naturally occurring polysaccharide and well known for its exceptional properties such as high biocompatibility and biodegradability, along with a low immunogenicity. Besides its use for various biomedical applications it recently came into focus as a favorable excipient for the formulation of various ocular therapeutics. This review article summarizes the ocular distribution of HA and its most heavily investigated binding protein "cluster of differentiation 44" (CD44) which is the rationale for the clinical use of HA, primarily as an additive in ocular applications ranging from eye drops to contact lenses. Moreover, examples will be given for using HA in various pre-clinical approaches to generate entirely new therapeutics, most notably in the field of nanotechnology.

Development, characterization, and in vivo assessment of mucoadhesive nanoparticles containing fluconazole for the local treatment of oral candidiasis

This study aimed to develop a suitable buccal mucoadhesive nanoparticle (NP) formulation containing fluconazole for the local treatment of oral candidiasis. The suitability of the prepared formulations was assessed by means of particle size (PS), polydispersity index, and zeta potential measurements, morphology analysis, mucoadhesion studies, drug entrapment efficiency (EE), in vitro drug release, and stability studies. Based on the optimum NP formulation, ex vivo drug diffusion and in vitro cytotoxicity studies were performed. Besides, evaluation of the antifungal effect of the optimum formulation was evaluated using agar diffusion method, fungicidal activity-related in vitro release study, and time-dependent fungicidal activity. The effect of the optimum NP formulation on the healing of oral candidiasis was investigated in an animal model, which was employed for the first time in this study. The zeta potential, mucoadhesion, and in vitro drug release studies of various NP formulations revealed that chitosan-coated NP formulation containing EUDRAGIT(®) RS 2.5% had superior properties than other formulations. Concerning the stability study of the selected formulation, the formulation was found to be stable for 6 months. During the ex vivo drug diffusion study, no drug was found in receptor phase, and this is an indication of local effect. The in vitro antifungal activity studies showed the in vitro efficacy of the NP against Candida albicans for an extended period. Also, the formulation had no cytotoxic effect at the tested concentration. For the in vivo experiments, infected rabbits were successfully treated with local administration of the optimum NP formulation once a day. This study has shown that the mucoadhesive NP formulation containing fluconazole is a promising candidate with once-a-day application for the local treatment of oral candidiasis.