Formation of TiO2 nanoparticles by reactive-layer-assisted deposition and characterization by XPS and STM

Development of a novel LED-IoT photoreactor for enhanced removal of carbamazepine waste driven by solar energy

This study introduces an innovative LED-IoT photoreactor, representing a significant advancement in response to the demand for sustainable water purification. The integration of LED-IoT installations addresses the challenge of intermittent sunlight availability, employing LEDs with a spectrum mimicking natural sunlight. Passive Infra-Red (PIR) sensors and Internet of things (IoT) technology ensure consistent radiation intensity, with the LED deactivating in ample sunlight and activating in its absence. Utilizing a visible light-absorbing photocatalyst developed through sol-gel synthesis and mild-temperature calcination, this research demonstrates a remarkable carbamazepine removal efficiency exceeding 95% under LED-IoT system illumination, compared to less than 90% efficiency with sunlight alone, within a 6-h exposure period. Moreover, the designed photocatalytic system achieves over 60% mineralization of carbamazepine after 12 h. Notably, the photocatalyst demonstrated excellent stability with no performance loss during five further cycles. Furthermore, integration with renewable energy sources facilitated continuous operation beyond daylight hours, enhancing the system's applicability in real-world water treatment scenarios. A notable application of the LED-IoT system at an operating sewage treatment plant showed nearly 80% efficiency in carbamazepine removal from sewage in the secondary settling tank after 6 h of irradiation, coupled with nearly 40% mineralization efficiency. Additionally, physicochemical analyses such as XPS and STA-FTIR confirm that the carbamazepine photooxidation process does not affect the surface of the photocatalyst, showing no adsorption for degradation products.

Unraveling the impact of microwave-assisted techniques in the fabrication of yttrium-doped TiO2 photocatalyst

In this study, we investigate the role of microwave technology in the fabrication of yttrium-doped TiO2 through a comparative analysis of hydrothermal techniques. Microwave-assisted hydrothermal synthesis offers advantages, but a comprehensive comparison between microwave-assisted and conventional methods is lacking. Therefore, in our investigation, we systematically evaluate and compare the morphological, structural, and optical properties of yttrium-doped TiO2 samples synthesized using both techniques. The X-ray diffraction (XRD) patterns confirm the anatase tetragonal structure of the synthesized TiO2-Y systems, while the larger ion radius of yttrium (Y3+) compared to titanium (Ti4+) presents challenges for yttrium to incorporate into the TiO2 lattice. The X-ray Photoelectron Spectroscopy (XPS) revealed a significant difference in the atomic content of yttrium between the TiO2-Y systems synthesized using microwave-assisted and conventional methods. This finding suggests that the rapid microwave method is more effective in successfully doping TiO2 with rare earth metals such as yttrium. The photo-oxidation of carbamazepine (CBZ) using TiO2-Y systems demonstrated high efficiency under UV-LED light. Microwave-synthesized TiO2-Y demonstrates improved photo-oxidation efficiency of CBZ, attributed to enhanced absorption, charge transfer, surface area, and crystallite size. Overall, the microwave-synthesized TiO2-Y systems showed promising performance for the photo-oxidation of CBZ, with improved efficiency compared to conventional synthesis methods.

Highly Flexible and Acid-Alkali Resistant TiN Nanomesh Transparent Electrodes for Next-Generation Optoelectronic Devices

Transparent electrodes are vital for optoelectronic devices, but their development has been constrained by the limitations of existing materials such as indium tin oxide (ITO) and newer alternatives. All face issues of robustness, flexibility, conductivity, and stability in harsh environments. Addressing this challenge, we developed a flexible, low-cost titanium nitride (TiN) nanomesh transparent electrode showcasing exceptional acid-alkali resistance. The TiN nanomesh electrode, created by depositing a TiN coating on a naturally cracked gel film substrate via a sputtering method, maintains a stable electrical performance through thousands of bending cycles. It exhibits outstanding chemical stability, resisting strong acid and alkali corrosion, which is a key hurdle for current electrodes when in contact with acidic/alkaline materials and solvents during device fabrication. This, coupled with superior light transmission and conductivity (88% at 550 nm with a sheet resistance of ∼200 Ω/sq), challenges the reliance on conventional materials. Our TiN nanomesh electrode, successfully applied in electric heaters and electrically controlled thermochromic devices, offers broad potential beyond harsh environment applications. It enables alternative possibilities for the design and fabrication of future optoelectronics for advancements in this pivotal field.

A Review of the Antibacterial, Fungicidal and Antiviral Properties of Selenium Nanoparticles

The resistance of microorganisms to antimicrobial drugs is an important problem worldwide. To solve this problem, active searches for antimicrobial components, approaches and therapies are being carried out. Selenium nanoparticles have high potential for antimicrobial activity. The relevance of their application is indisputable, which can be noted due to the significant increase in publications on the topic over the past decade. This review of research publications aims to provide the reader with up-to-date information on the antimicrobial properties of selenium nanoparticles, including susceptible microorganisms, the mechanisms of action of nanoparticles on bacteria and the effect of nanoparticle properties on their antimicrobial activity. This review describes the most complete information on the antiviral, antibacterial and antifungal effects of selenium nanoparticles.

Selective Oxidation of Cyclohexane to Cyclohexanol/Cyclohexanone by Surface Peroxo Species on Cu-Mesoporous TiO2

Selective oxidation of cyclohexane to cyclohexanol/cyclohexanone (KA-oil) is an important chemical process, which is still constrained by low conversion and selectivity and high energy consumption. In this study, Cu-doped mesoporous TiO₂ (Cu-MT) has been successfully synthesized via calcinating MIL-125(Ti) doped with copper acetylacetonate, which shows high reactivity in selective oxidation of cyclohexane to KA-oil by persulfate (PS) with the desirable cyclohexane conversion of 16.8% and a selectivity of 98.0% under mild conditions and the low ratio of PS/cyclohexane of 1:1. A series of characterizations and density functional theory calculations reveal that the doped Cu(I,II) on Cu-MT is the reactive site for non-radical activation of PS with the moderate elongation of the O-O bond in PS, which then abstracts 1H (1H⁺ + 1e^-) from cyclohexane to form Cy^• and eventually KA-oil. This study gives new insight on the importance of moderately activated PS in selective oxidation of C-H.

Titanium dioxide incorporated in cellulose nanofibers with enhanced UV blocking performance by eliminating ROS generation

The preparation of sunblocks with dispersion stability, ultraviolet blocking, and photocompatibility remains a considerable challenge. Plant-derived natural polymers, such as cellulose nanofibers (CNF), show versatile traits, including long aspect ratio, hydrophilic nature, resource abundance, and low material cost. In the present study, a facile and cost-effective strategy is reported for the fabrication of nanostructured inorganic materials by incorporating natural polymers as interspersed, systematically nanosized titanium dioxide (TiO2) particles onto CNF. Among all experiments, the optimized TiO2@CNF3 showed higher ultraviolet blocking performance and less whitening effect. The outstanding performance is attributed to the engineering of equally dispersed nano-sized TiO2 particles on the CNF surface and stable dispersion. Significantly, TiO2@CNF3 exhibited excellent compatibility with avobenzone (80%), an oil-soluble ingredient used in sunblock products, illustrating the photoprotection enhancement under ultraviolet A (UVA) and ultraviolet B (UVB). Moreover, only 14.8% rhodamine B (Rho-B) dye degraded through photocatalytic oxidation process with the TiO2@CNF3, which is negligible photocatalytic activity compared to that of TiO2 (95% dye degraded). Furthermore, commercial inorganic and organic sunblock products with SPF lifetimes of 35+ and 50+ were modified using CNF, significantly enhancing the transmittance performance compared to that of the pure sunblock. However, it was also observed that hydrophilic CNF tended to demulsify the creams due to electrostatic disequilibrium. This CNF-based modified TiO2 system is a new window to replace effective sunblock products in high-value-added applications, such as cosmetics.

Ag2O Nanoparticles as a Candidate for Antimicrobial Compounds of the New Generation

Antibiotic resistance in microorganisms is an important problem of modern medicine which can be solved by searching for antimicrobial preparations of the new generation. Nanoparticles (NPs) of metals and their oxides are the most promising candidates for the role of such preparations. In the last few years, the number of studies devoted to the antimicrobial properties of silver oxide NPs have been actively growing. Although the total number of such studies is still not very high, it is quickly increasing. Advantages of silver oxide NPs are the relative easiness of production, low cost, high antibacterial and antifungal activities and low cytotoxicity to eukaryotic cells. This review intends to provide readers with the latest information about the antimicrobial properties of silver oxide NPs: sensitive organisms, mechanisms of action on microorganisms and further prospects for improving the antimicrobial properties.

Effect of HCl treatment on physico-chemical properties and photocatalytic performance of Fe-TiO2 nanotubes for hexavalent chromium reduction and dye degradation under visible light

In this study, we prepared Fe₂O₃/TNT composite (Fe-TNT) foil by combining anodization with the hydrothermal method. Photocatalytic reaction was restricted by a cluster of iron particles accumulated on the foil surface and the photocatalytic reaction sites reduces. Herein, using XPS determined that these iron particles are composed of iron oxide. An acid treatment, hydrochloric acid (HCl) was used to successfully remove the surface accumulation of iron oxide particles on the photocatalyst. Using cleaned Fe-TNT foil, the photocatalytic activity of 5 mg/L Congo red (CR) and hexavalent chromium reduction was significantly increased under visible irradiation. In addition, the influence of different aspects such as pH, the concentration of Fe, and the effect of different acid treatment time was evaluated. Removing the surface accumulated iron oxide and adjusting the pH in acidic medium, 73% hexavalent chromium reduction achieved within 180 min. The reusability was also explored by monotonous CR degradation. The CR degradation using Fe_0.25-TNT was lessened from 78% in the first cycle to 71% in the 3rd cycle. It was also confirmed experimentally that photocatalytic activity improvement of HCl treated Fe-TNT was not due to alternation in nanotube structure.

Oxidation of Anatase TiO2(001) Surface Using Supersonic Seeded Oxygen Molecular Beam

We investigated the oxidation of oxygen vacancies at the surface of anatase TiO₂(001) using a supersonic seeded molecular beam (SSMB) of oxygen. The oxygen vacancies at the top surface and subsurface could be eliminated by the supply of oxygen using an SSMB. Oxygen vacancies are present on the surface of anatase TiO₂(001) when it is untreated before transfer to a vacuum chamber. These vacancies, which are stable in the as-grown condition, could also be effectively eliminated by using the oxygen SSMB.

Surface structure of mass-selected niobium oxide nanoclusters on Au(111)

The structures formed by the deposition of mass-selected niobium oxide clusters, Nb₃O_y(y = 5, 6, 7), onto Au(111) were studied by scanning tunneling microscopy. The as-deposited Nb₃O₇clusters assemble into large dendritic structures that grow on the terraces as well as extend from the top and bottom of step edges. The Nb₃O₆cluster also forms dendritic assemblies but they are generally much smaller in size. The assemblies are composed of smaller discrete structures (<1 nm) which are likely to be single clusters. The dendritic assemblies for both the Nb₃O₇and Nb₃O₆clusters have fractal dimensions of about 1.7 which is very close to that expected for simple diffusion limited aggregation. Annealing the Nb₃O_7,6/Au(111) surfaces up to 550 K results in changes in assembly sizes and increases in heights, while heating to 700 results in the disruption of the assemblies into smaller structures. By contrast, the as-deposited Nb₃O₅/Au(111) surface at RT exhibits compact cluster structures which become 3D nanoparticles when annealed above 550 K. Differences in the observed surface structures and thermal stability are attributed to differences in metal-oxygen stoichiometry which can influence cluster binding energies, mobility and inter-cluster interactions.

Linescan Lattice Microscopy: A Technique for the Accurate Measurement and Mapping of Lattice Spacing and Strain with Atomic Force Microscopy

Lateral resolution and accuracy in scanning probe microscopies are limited by the nonideality of piezoelectric scanning elements due to phenomena including nonlinearity, hysteresis, and creep. By taking advantage of the well-established atomic-scale stick-slip phenomenon in contact-mode atomic force microscopy, we have developed a method for simultaneously indexing and measuring the spacing of surface atomic lattices using only Fourier analysis of unidirectional linescan data. The first step of the technique is to calibrate the X-piezo response using the stick-slip behavior itself. This permits lateral calibration to better than 1% error between 2.5 nm and 9 μm, without the use of calibration gratings. Lattice indexing and lattice constant determination are demonstrated in this way on the NaCl(001) crystal surface. After piezo calibration, lattice constant measurement on a natural bulk MoS₂(0001) surface is demonstrated with better than 0.2% error. This is used to measure nonuniform thermal mismatch strain for chemical vapor deposition (CVD)-grown monolayer MoS₂ as small as 0.5%. A spatial mapping technique for the lattice spacing is developed and demonstrated, with absolute accuracy better than 0.2% and relative accuracy better than 0.1%, within a map of 12.5 × 12.5 nm² pixels using bulk highly oriented pyrolytic graphite (HOPG) and MoS₂ as reference materials.

TiO2 nanoparticle coatings on glass surfaces for the selective trapping of leukemia cells from peripheral blood

Photodynamic therapy (PDT) using TiO₂ nanoparticles has become an important alternative treatment for different types of cancer due to their high photocatalytic activity and high absorption of UV-A light. To potentiate this treatment, we have coated commercial glass plates with TiO₂ nanoparticles prepared by the sol-gel method (TiO₂ -m), which exhibit a remarkable selectivity for the irreversible trapping of cancer cells. The physicochemical properties of the deposited TiO₂ -m nanoparticle coatings have been characterized by a number of complementary surface-analytical techniques and their interaction with leukemia and healthy blood cells were investigated. Scanning electron and atomic force microscopy verify the formation of a compact layer of TiO₂ -m nanoparticles. The particles are predominantly in the anatase phase and have hydroxyl-terminated surfaces as revealed by Raman, X-ray photoelectron, and infrared spectroscopy, as well as X-ray diffraction. We find that lymphoblastic leukemia cells adhere to the TiO₂ -m coating and undergo amoeboid-like migration, whereas lymphocytic cells show distinctly weaker interactions with the coating. This evidences the potential of this nanomaterial coating to selectively trap cancer cells and renders it a promising candidate for the development of future prototypes of PDT devices for the treatment of leukemia and other types of cancers with non-adherent cells.

Optimization of hydrothermal synthesis of Fe-TiO2 nanotube arrays for enhancement in visible light using an experimental design methodology

We designed an experiment to optimize the hydrothermal modification of iron on anodized TiO₂ nanotubes. A central composite design that included five design points was used to determine the condition parameters for hydrothermal reaction time (1-5 h) and hydrothermal temperature (120-180 °C). A statistical method was used to observe the effects of hydrothermal conditions on the material properties and photocatalytic activity of a Fe-TiO₂ nanotube catalyst. Scanning electron microscopic (SEM) analysis shows the iron is doped on the TNTs, which is further confirmed by energy-dispersive X-ray spectroscopy. X-ray diffraction indicate the existing states of iron in the form of iron oxide on the TNT. The maximum degradation efficiency (92.3%) was achieved at a hydrothermal temperature of 150 °C and time of 3 h. It is found that the optimal medication of the Fe-TNT catalyst occurred at a particular combination of temperature (150 °C) and reaction time (3 h), that provide the more active sites for iron to enter the crystal lattice of TNT, and that the maximum CR degradation could be achieved.

Evaluation of Solar-Driven Photocatalytic Activity of Thermal Treated TiO₂ under Various Atmospheres

In this report, the photocatalytic activity of P25 has been explored and the influence of thermal treatment under various atmospheres (air, vacuum and hydrogen) were discussed. The samples’ characteristics were disclosed by means of various instruments including X-ray diffraction (XRD), Electron paramagnetic resonance (EPR), X-ray photoelectron spectroscopy (XPS) and UV–vis. This study also accentuates various states of the oxygen vacancy density formed inside the samples as well as the colour turning observed in treated P25 under various atmospheres. Produced coloured TiO₂ samples were then exploited for their photocatalytic capability concerning photodegradation of methylene blue (MB) using air mass (AM) 1.5 G solar light irradiation. Our findings revealed that exceptional photocatalytic activity of P25 is related to the thermal treatment. Neither oxygen vacancy formation nor photocatalytic activity enhancement was observed in the air-treated sample. H₂-treated samples have shown better photoactivity which even could be further improved by optimizing treatment conditions to achieve the advantages of the positive role of oxygen vacancy (O-vacancy at higher concentration than optimum acts as electron trapping sites). The chemical structure and stability of the samples were also studied. There was no sign of deteriorating of O₂-vacancies inside the samples after 6 months. High stability of thermal treated samples in terms of both long and short-term time intervals is another significant feature of the produced photocatalyst.

Highly Reliable Superhydrophobic Protection for Organic Field-Effect Transistors by Fluoroalkylsilane-Coated TiO2 Nanoparticles

One of the long-standing problems in the field of organic electronics is their instability in an open environment, especially their poor water resistance. For the reliable operation of organic devices, introducing an effective protection layer using organo-compatible materials and processes is highly desirable. Here, we report a facile method for the depositing of an organo-compatible superhydrophobic protection layer on organic semiconductors under ambient conditions. The protection layer exhibiting excellent water-repellent and self-cleaning properties was deposited onto organic semiconductors directly using a dip-coating process in a highly fluorinated solution with fluoroalkylsilane-coated titanium dioxide (TiO₂) nanoparticles. The proposed protection layer did not damage the underlying organic semiconductors and had good resistance against mechanical-, thermal-, light-stress-, and water-based threats. The protected organic field-effect transistors exhibited more-reliable electrical properties, even when exposed to strong solvents, due to its superhydrophobicity. This study provides a practical solution with which to enhance the reliability of environmentally sensitive organic semiconductor devices in the natural environment.

High Infrared Blocking Cellulose Film Based on Amorphous to Anatase Transition of TiO2 via Atomic Layer Deposition

A high IR-blocking cellulose film was designed based on an amorphous to anatase transition of TiO₂ using atomic layer deposition (ALD). This transition was realized at 250 °C, at which the cellulose is thermal stable. Optimized ALD condition of 250 °C and 1200 cycles give us an excellent heat insulator, which could significantly reduce the enclosed space temperature from 59.2 to 51.9 °C after exposure to IR lamp for 5 min.

Geometry-dependent DNA-TiO2 immobilization mechanism: A spectroscopic approach

DNA nucleotides are used as a molecular recognition system on electrodes modified to be applied in the detection of various diseases, but immobilization mechanisms, as well as, charge transfers are not satisfactorily described in the literature. An electrochemical and spectroscopic study was carried out to characterize the molecular groups involved in the direct immobilization of DNA structures on the surface of nanostructured TiO₂ with the aim of evaluating the influence of the geometrical aspects. X-ray photoelectron spectroscopy at O1s and P2p core levels indicate that immobilization of DNA samples occurs through covalent (POTi) bonds. X-ray absorption spectra at the Ti2p edge reinforce this conclusion. A new species at 138.5eV was reported from P2p XPS spectra analysis which plays an important role in DNA-TiO₂ immobilization. The POTi/OTi ratio showed that quantitatively the DNA immobilization mechanism is dependent on their geometry, becoming more efficient for plasmid ds-DNA structures than for PCR ds-DNA structures. The analysis of photoabsorption spectra at C1s edge revealed that the molecular groups that participate in the C1s→LUMO electronic transitions have different pathways in the charge transfer processes at the DNA-TiO₂ interface. Our results may contribute to additional studies of immobilization mechanisms understanding the influence of the geometry of different DNA molecules on nanostructured semiconductor and possible impact to the charge transfer processes with application in biosensors or aptamers.

Crystallization of microporous TiO2 through photochemical deposition of Pt for photocatalytic degradation of volatile organic compounds

The photocatalytic mineralization efficiency of volatile organic compounds (VOCs) is determined by adsorption of reactants, separation of charge carriers, and reaction activity of catalyst surface. Herein, we provide a strategy to synthesize a novel catalyst, namely, PhPt-Micro, which is characterized by high adsorption ability, charge separation efficiency, and surface reaction activity. Toluene was chosen as the model VOC. The effects of photochemical deposition of Pt on the physical properties of microporous amorphous TiO₂ (Micro) and toluene mineralization were studied using N₂ adsorption/desorption, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, GC-flame ionization detection, and surface photovoltage spectroscopy (SPS) analyses. After photochemical treatment, the structure of Micro was optimized, and Pt nanoparticles were successfully deposited at the outlet of electrons on the catalyst surface. SPS result proved that the optimized structure enhanced the separation efficiency of charge carriers and the migration of photo-generated electrons to the PhPt-Micro surface. The quasi-equilibrium adsorption amount of toluene over PhPt-Micro was two times higher than that with commercial nano TiO₂ (P25). The micropores concentrated toluene on the catalyst surface and hindered intermediate desorption. The mineralization efficiency of toluene over PhPt-Micro was 2.4 and 5.9 times higher than those over Micro and P25, respectively.

Buffer Layer Assisted Chemistry over Amorphous Solid Water: Oxide Thin Film or Metallic Nanoparticles Formation

Novel procedures to grow pure thin metal oxide films are always welcome in view of their wide range of applications including photocatalysis, solar cells, sensors, and more. In this paper we present a unique way to grow pure nanofilms of metal oxides in vacuo at the temperature range 110-170 K. The reactive layer assisted deposition (RLAD) procedure for thin oxide films growth is based on the evaporation of a reactive metal element on top of a condensed layer of amorphous solid water (D₂O-ASW). When applied to metals that do not react with the water layer, the process yields metal nanoclusters on the substrate. We observed that metal oxide films are formed if the redox potential is of -1.0 V or less, leading to deuterium molecules ejection to the gas phase (e.g., Ti and Al) while metals such as Zn, Fe, and Ag, with redox potentials more than -1.0 V, transform into nanoclusters, as revealed by SEM studies. We conclude that the redox potential ia a parameter that enables one to predict the nature and outcome of the ASW buffer layer assisted chemistry.

Highly Flexible Resistive Switching Memory Based on the Electronic Switching Mechanism in the Al/TiO2/Al/Polyimide Structure

A highly flexible resistive switching (RS) memory was fabricated in the Al/TiO₂/Al/polyimide structure using a simple and cost-effective method. An electronic-resistive-switching-based flexible memory with high performance that can withstand a bending strain of up to 3.6% was obtained. The RS properties showed no obvious degradation even after the bending tests that were conducted up to 10 000 times, and over 4000 writing/erasing cycles were confirmed at the maximally bent state. The superior electrical properties against the mechanical stress of the device can be ascribed to the electronic RS mechanism related to electron trapping/detrapping, which can prevent the inevitable degradation in the case of the RS related with the ionic defects.

Superior solar-to-hydrogen energy conversion efficiency by visible light-driven hydrogen production via highly reduced Ti2+/Ti3+ states in a blue titanium dioxide photocatalyst

A catalytic hydrogen production system was developed with TiO₂ that contains Ti³⁺/Ti²⁺ reduced states which act as both visible and IR light harvesting components as well as the catalytic site.

CO2 Plasma-Treated TiO2 Film as an Effective Electron Transport Layer for High-Performance Planar Perovskite Solar Cells

Perovskite solar cells (PSCs) have received great attention because of their excellent photovoltaic properties especially for the comparable efficiency to silicon solar cells. The electron transport layer (ETL) is regarded as a crucial medium in transporting electrons and blocking holes for PSCs. In this study, CO₂ plasma generated by plasma-enhanced chemical vapor deposition (PECVD) was introduced to modify the TiO₂ ETL. The results indicated that the CO₂ plasma-treated compact TiO₂ layer exhibited better surface hydrophilicity, higher conductivity, and lower bulk defect state density in comparison with the pristine TiO₂ film. The quality of the stoichiometric TiO₂ structure was improved, and the concentration of oxygen-deficiency-induced defect sites was reduced significantly after CO₂ plasma treatment for 90 s. The PSCs with the TiO₂ film treated by CO₂ plasma for 90 s exhibited simultaneously improved short-circuit current (J_SC) and fill factor. As a result, the PSC-based TiO₂ ETL with CO₂ plasma treatment affords a power conversion efficiency of 15.39%, outperforming that based on pristine TiO₂ (13.54%). These results indicate that the plasma treatment by the PECVD method is an effective approach to modify the ETL for high-performance planar PSCs.

A pM leveled photoelectrochemical sensor for microcystin-LR based on surface molecularly imprinted TiO2@CNTs nanostructure

A simple and highly sensitive photoelectrochemical (PEC) sensor towards Microcystin-LR (MC-LR), a kind of typical cyanobacterial toxin in water samples, was developed on a surface molecular imprinted TiO₂ coated multiwalled carbon nanotubes (MI-TiO₂@CNTs) hybrid nanostructure. It was synthesized using a feasible two-step sol-gel method combining with in situ surface molecular imprinting technique (MIT). With a controllable core-shell tube casing structure, the resultant MI-TiO₂@CNTs are enhanced greatly in visible-light driven response capacity. In comparison with the traditional TiO₂ (P25) and non-imprinted (NI-)TiO₂@CNTs, the MI-TiO₂@CNTs based PEC sensor showed a much higher photoelectric oxidation capacity towards MC-LR. Using this sensor, the determination of MC-LR was doable in a wide linear range from 1.0pM to 3.0nM with a high photocurrent response sensitivity. An outstanding selectivity towards MC-LR was further achieved with this sensor, proven by simultaneously monitoring 100-fold potential co-existing interferences. The superiority of the obtained MC-LR sensor in sensitivity and selectivity is mainly attributed to the high specific surface area and excellent photoelectric activity of TiO₂@CNTs heterojunction structure, as well as the abundant active recognition sites on its functionalized molecular imprinting surface. A promising PEC analysis platform with high sensitivity and selectivity for MC-LR has thus been provided.

Rough Structure of Electrodeposition as a Template for an Ultrarobust Self-Cleaning Surface

Superhydrophobic surfaces with self-cleaning properties have been developed based on roughness on the micro- and nanometer scales and low-energy surfaces. However, such surfaces are fragile and stop functioning when exposed to oil. Addressing these challenges, here we show an ultrarobust self-cleaning surface fabricated by a process of metal electrodeposition of a rough structure that is subsequently coated with fluorinated metal-oxide nanoparticles. Scanning electron microscopy, Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, and X-ray diffraction were employed to characterize the surfaces. The micro- and nanoscale roughness jointly with the low surface energy imparted by the fluorinated nanoparticles yielded surfaces with water contact angle of 164.1° and a sliding angle of 3.2°. Most interestingly, the surface exhibits fascinating mechanical stability after finger-wipe, knife-scratch, sand abrasion, and sandpaper abrasion tests. It is found that the surface with superamphiphobic properties has excellent repellency toward common corrosive liquids and low-surface-energy substances. Amazingly, the surface exhibited excellent self-cleaning ability and remained intact even after its top layer was exposed to 50 abrasion cycles with sandpaper and oil contamination. It is believed that this simple, unique, and practical method can provide new approaches for effectively solving the stability issue of superhydrophobic surfaces and could extend to a variety of metallic materials.

Electron-transfer dependent photocatalytic hydrogen generation over cross-linked CdSe/TiO2 type-II heterostructure

Developing type-II heterostructures with a spatial separation of photoexcited electrons and holes is a useful route to promote photocatalytic hydrogen generation. However, few investigations on the charge transfer process across the heterojunction have been carried out, which can allow us to uncover the reaction mechanism. Herein, CdSe quantum dots (QDs) and TiO₂ nanocrystals were synthesized and combined in water yielding CdSe/TiO₂ type II heterostructures. It was found that mercaptopropionic acid as bifunctional molecules could bind with CdSe and TiO₂ to form a cross-linked morphology. The charge carrier dynamics of bare CdSe and CdSe/TiO₂ were detected using femtosecond transient absorption spectroscopy. In the presence of TiO₂, the average exciton lifetime of CdSe QDs was apparently decreased, owing to the electron transfer from photoexcited CdSe to TiO₂. Particularly, the electron-transfer rate from small CdSe QDs (3.0 nm) was much faster than that from big CdSe QDs (4.2 nm). The improved photocatalytic hydrogen generation was observed for CdSe/TiO₂ compared to bare CdSe QDs. The enhancement factor for small CdSe QDs was higher than that for big CdSe QDs, which was in good agreement with the electron-transfer rates. This result indicated that the electron transfer between CdSe and TiO₂ played an important role in photocatalytic hydrogen generation on CdSe/TiO₂ type-II heterostructure. Our study provides a fundamental guidance to construct efficient heterostructured photocatalysts by delicate control of the band alignment.

Double dimensionally ordered nanostructures: toward a multifunctional reinforcing nanohybrid for epoxy resin

Multifunctional intercalation between a monodisperse 0D nano-TiO₂ ball cactus and 2D layered MMT and their synergistic impacts to the epoxy matrix.

A stable and highly efficient visible-light photocatalyst of TiO2 and heterogeneous carbon core–shell nanofibers

A highly efficient visible-light photocatalyst of TiO₂ and heterogeneous carbon core–shell nanofibers is reported.

Mesoporous Ag@TiO2 nanofibers and their photocatalytic activity for hydrogen evolution

We reported the exploration of Ag@TiO₂ mesoporous nanofibers with significantly improved photocatalytic performance.

Eu3+ doped down shifting TiO2 layer for efficient dye-sensitized solar cells

Europium doped TiO₂ (TiO₂:Eu³⁺) down-shifting (DS) nanophosphors (NPrs) were synthesized by the solution-combustion method with different concentrations of Eu³⁺. The X-ray diffraction results confirmed the formation of a polycrystalline tetragonal structure of the TiO₂. The emission of colour of the TiO₂:Eu³⁺ DS NPr was tuned by varying the doping concentration of Eu³⁺. The photoluminescence results confirmed that the TiO₂:Eu³⁺ DS NPrs converted the UV light into visible light by energy down-conversion process, i.e. down-shifting of high energy UV photons to low energy visible photons. These TiO₂:Eu³⁺ DS NPrs were used to enhance the efficiency of the Dye sensitized solar cell from 8.32% to 8.80%.

Black N/H-TiO2 Nanoplates with a Flower-Like Hierarchical Architecture for Photocatalytic Hydrogen Evolution

A facile two-step strategy was used to prepare black of hydrogenated/nitrogen-doped TiO₂ nanoplates (NHTA) with a flower-like hierarchical architecture. In situ nitriding and self-assembly was realized by hydrothermal synthesis using tripolycyanamide as a N source and as a structure-directing agent. After thorough characterization, it was found that the hydrogenation treatment did not damage the flower-like architecture but distorted the anatase crystal structure and significantly changed the band structure of NHTA owing to the increased concentration of oxygen vacancies, hydroxyl groups, and Ti³⁺ cations. Under AM 1.5 illumination, the photocatalytic H₂ evolution rate on the black NHTA was approximately 1500 μmol g^-1  h^-1 , which was much better than the N-doped TiO₂ nanoplates (≈690 μmol g^-1  h^-1 ). This improvement in the hydrogen evolution rate was attributed to a reduced bandgap, enhanced separation of the photogenerated charge carriers, and an increase in the surface-active sites.