Vertically oriented Ti-Fe-O nanotube array films: toward a useful material architecture for solar spectrum water photoelectrolysis

Biotemplated Fe/La-co-doped TiO2 for photocatalytic depth treatment of compressed leachate from refuse transfer station

Compressed leachate is a contaminated liquid containing various organic and inorganic pollutants produced in municipal refuse transfer stations, which pollute soil and groundwater, posing serious risks to the environment and human health. The Environmental Technology Co., Ltd. (Shenzhen, Guangdong Province, South China) treated compressed leachate obtained from a refuse transfer station. The chemical oxygen demand (COD) (641.2 mg/L) of treated compressed leachate did not meet the wastewater quality standards in China for discharge into municipal sewers (COD ≤ 500 mg/L) and the company's design discharge requirements (COD ≤ 400 mg/L). Therefore, their further in-depth treatment is necessary. To this end, waste tobacco leaves were used as the biotemplate herein, and Fe/La-co-doped TiO2 (xFe,yLa)-TTiO2(g) was synthesized using a solvothermal-assisted biotemplating method. The photocatalytic depth treatment of compressed leachate was performed under simulated solar light using the prepared catalysts. After (3Fe,3La)-TTiO2(g) treatment, the COD of the leachate decreased from 641.2 to 280.1 mg/L, and the COD removal rate was 1.2, 1.1, and 1.6 times higher than that of pure Fe-doped, La-doped and non-biological template TiO2, respectively. Characterization confirmed that the biological template endowed the catalyst with a unique morphology and high specific surface area. Its rich activity sites are conducive to enhancing the adsorption capacity of pollutants and providing an ideal place for photocatalytic reactions. Co-doping with iron and lanthanum ions altered the band structure of TiO2 and promoted the interconversion of Fe3+/Fe2+ and La3+/La2+ during photocatalysis. First-principles density functional theory simulations demonstrated that co-doping Fe and La in TiO2 created impurity levels that facilitated the transfer of photogenerated electrons. This study provides a new purification pathway for the depth treatment of compressed leachate.

Laser-Treated MXene as an Electrochemical Agent to Boost Properties of Semitransparent Photoelectrode Based on Titania Nanotubes

In this study, Ti3C2Tx underwent laser treatment to reshape it, resulting in the formation of a TiO2/Ti3C2Tx heterojunction. The interaction with laser light induced the formation of spherical TiO2 composed of an anatase-rutile phase on the Ti3C2Tx surface. Such a heterostructure was loaded over a titania nanotube (TNT) layer, and the surface area was enhanced through immersion in a TiCl4 solution followed by thermal treatment. Consequently, the photon-to-electron conversion efficiency exhibits a 10-fold increase as compared to bare TNT. Moreover, for the sample produced with optimized conditions, five times higher photoactivity is observed in comparison to bare TNT. It was shown that under visible light irradiation the most photoactive heterojunction based on the tubular layer reveals a substantial drop in the charge transfer resistance of about 32% with respect to the dark condition. This can be attributed to the narrower band gaps of the modified material and improvement of the separation efficiency of the photogenerated electron-hole pairs. Overall results suggest that this investigation underscores TiO2/Ti3C2Tx as a promising noble-metal-free material that enhances both the electrochemical and photoelectrochemical performances of electrode materials based on TNT that can be further used in light-harvesting applications.

Recent Progress on Phase Engineering of Nanomaterials

As a key structural parameter, phase depicts the arrangement of atoms in materials. Normally, a nanomaterial exists in its thermodynamically stable crystal phase. With the development of nanotechnology, nanomaterials with unconventional crystal phases, which rarely exist in their bulk counterparts, or amorphous phase have been prepared using carefully controlled reaction conditions. Together these methods are beginning to enable phase engineering of nanomaterials (PEN), i.e., the synthesis of nanomaterials with unconventional phases and the transformation between different phases, to obtain desired properties and functions. This Review summarizes the research progress in the field of PEN. First, we present representative strategies for the direct synthesis of unconventional phases and modulation of phase transformation in diverse kinds of nanomaterials. We cover the synthesis of nanomaterials ranging from metal nanostructures such as Au, Ag, Cu, Pd, and Ru, and their alloys; metal oxides, borides, and carbides; to transition metal dichalcogenides (TMDs) and 2D layered materials. We review synthesis and growth methods ranging from wet-chemical reduction and seed-mediated epitaxial growth to chemical vapor deposition (CVD), high pressure phase transformation, and electron and ion-beam irradiation. After that, we summarize the significant influence of phase on the various properties of unconventional-phase nanomaterials. We also discuss the potential applications of the developed unconventional-phase nanomaterials in different areas including catalysis, electrochemical energy storage (batteries and supercapacitors), solar cells, optoelectronics, and sensing. Finally, we discuss existing challenges and future research directions in PEN.

Electrospun silk nanofiber loaded with Ag-doped TiO2 with high-reactive facet as multifunctional air filter

Particulate matter (PM) and volatile organic compounds (VOCs) are air pollution that can cause high risk to public health. To protect individuals from air pollution exposure, fibrous filters have been widely employed. In this work, we develop silk nanofibers, which are loaded with Ag-doped TiO2 nanoparticles with exposed (001) (assigned as Ag-TiO2-silk), via electrospinning method and utilized them as multifunctional air filters that can efficiently reduce PM2.5, organic pollutants and microbials. The results showed that Ag-TiO2-silk with a loading of 1 wt% (1%Ag-TiO2-silk) exhibited the best performance among various different Ag-doped samples, as it performed the best as an air filter, which had the highest PM2.5 removal efficiency of 99.04 ± 1.70% with low pressure drop of 34.3 Pa, and also exhibited the highest photodegradation efficiency of formaldehyde. In addition, the Ag-TiO2-silk demonstrated antibacterial activity. These properties make silk composite nanofibers attractive for multifunctional and environmentally-friendly air filter application.

Photodegradation of Amido Black 10b Dye Under Visible Light Using Ni and Zn Ferrite Catalysts Prepared by a Simple Modified Sol–Gel Method

The pure α-Fe2O3, NiFe2O4, and ZnFe2O4 were prepared by a simple modified sol–gel method. The prepared catalysts were characterized by X-ray diffraction, transmission electron microscope, surface area, Zeta potential and optical techniques. The ferrite structure of samples is confirmed. The photocatalytic activity was evaluated toward Amido black 10b dye degradation under visible light at different pHs of 4, 8, and 10 for 90 min irradiation time. The photodegradation toward Amido black b10 dye reached maximum value at pH 8, and it reaches 92%, 89%, and 85% over ZnFe2O4, Fe2O3, and NiFe2O4 photocatalysts; respectively. The increased photoactivity of the ZnFe2O4 sample can also be attributed to its lower bandgap of 2 eV, the formation of the −OH-surface group. Since –OH can interact with the photoexcited holes that were originally formed on the catalyst surface, hydroxyl radicals are produced that have strong oxidizing properties. Whereas; the dye photodegradation is negligible in the case of Fe2O3, and NiFe2O4 catalysts at pH 10, due to the electrostatic repulsion between negatively charged catalyst surface and dye ions at high basic medium. While, in case of ZnFe2O4, the photodegradation reached only 40%.

Solar-Driven Photocatalytic Films: Synthesis Approaches, Factors Affecting Environmental Activity, and Characterization Features

Solar-powered photocatalysis has come a long way since its humble beginnings in the 1990s, producing more than a thousand research papers per year over the past decade. In this review, immobilized photocatalysts operating under sunlight are highlighted. First, a literature review of solar-driven films is presented, along with some fundamental operational differences in relation to reactions involving suspended nanoparticles. Common strategies for achieving sunlight activity from films are then described, including doping, surface grafting, semiconductor coupling, and defect engineering. Synthetic routes to fabricate photocatalytically active films are briefly reviewed, followed by the important factors that determine solar photocatalysis efficiency, such as film thickness and structure. Finally, some important and specific characterization methods for films are described. This review shows that there are two main challenges in the study of photocatalytic materials in the form of (thin) films. First, the production of stable and efficient solar-driven films is still a challenge that requires an integrated approach from synthesis to characterization. The second is the difficulty in properly characterizing films. In any case, the research community needs to address these, as solar-driven photocatalytic films represent a viable option for sustainable air and water purification.

Photocatalytic reduction of CO2 into CH4 over Ru-doped TiO2: Synergy of Ru and oxygen vacancies

Photocatalytic conversion of CO₂ and H₂O into CH₄ is an intriguing approach to achieve solar energy utilization and CO₂ conversion, yet remains challenging in conversion efficiency. In this study, we present a synthesis of defected TiO₂ nanocrystal with oxygen vacancies (V_o) by a facile Ru doping-induced strategy under hydrothermal condition. The synergistic effect of Ru and oxygen vacancies contributed to the enhanced photocatalytic reduction of CO₂ toward CH₄. Oxygen vacancies and doped Ru not only can synergistically promote the separation of photogenerated carriers, but also promote the CO₂ adsorption, thus enhancing the photocatalytic activities. The optimal Ru-doped TiO₂ (denoted as 1% Ru-TiO_2-x) exhibited a remarkable enhanced photocatalytic performance with a CH₄ yield of 31.63 μmol·g^-1·h^-1, which is significantly higher than Ru-TiO₂ and TiO_2-x counterparts. This study systematically investigates the multiple roles of Ru in CO₂ reduction and provides new insights for the construction of metal oxide photocatalysts with oxygen vacancies by simple doping of metal ions.

Enzyme-Free Molecularly Imprinted and Graphene-Functionalized Photoelectrochemical Sensor Platform for Pollutants

In this work, a label-free nonenzymatic photoelectrochemical (PEC) sensor is successfully developed for the detection of a typical pollutant, microcystin-LR (MC-LR), based on a visible-light-responsive alloy oxide, with highly ordered and vertically aligned Ti-Fe-O nanotubes (NTs) as substrates. Ti-Fe-O NTs consisting mainly of TiO₂ and atomically doped Fe₂O₃ are in situ prepared on a Ti-Fe alloy by electrochemical anodic oxidation. Using a simple electrochemical deposition technique, reduced graphene oxide (RGO) could be grown onto Ti-Fe-O NTs, exhibiting significant bifunctions. It not only provides an ideal microenvironment for functionalization of molecularly imprinted polymers (MIPs) on the surface but also serves as the PEC signal amplification element because of its outstanding conductivity for photons and electrons. The designed MIP/RGO/Ti-Fe-O NT PEC sensor exhibits high sensitivity toward MC-LR with a limit of detection as low as 10 pM. High selectivity toward MC-LR is also proven for the sensor. A promising detection platform not only for MC-LR but also for other pollutants has therefore been provided.

Blue TiO2 nanotube arrays as semimetallic materials with enhanced photoelectrochemical activity towards water splitting

In the past years there has been a great interest in self-doped TiO₂ nanotubes (blue TiO₂ nanotubes) compared to undoped ones owing to their high carrier density and conductivity. In this study, blue TiO₂ nanotubes are investigated as photoanode materials for photoelectrochemical water splitting. Blue TiO₂ nanotubes were fabricated with enhanced photoresponse behavior through electrochemical cathodic polarization on undoped and annealed TiO₂ nanotubes. The annealing temperature of undoped TiO₂ nanotubes was tuned before cathodic polarization, revealing that annealing at 500 °C improved the photoresponse of the nanotubes significantly. Further optimization of the blue TiO₂ nanotubes was achieved by adjusting the cathodic polarization parameters. Blue TiO₂ nanotubes obtained at the potential of –1.4 V (vs. SCE) with a duration of 10 min exhibited twice more photocurrent response (0.39 mA cm^-2) compared to the undoped TiO₂ nanotube arrays (0.19 mA cm^-2). Oxygen vacancies formed through the cathodic polarization decreased charge recombination and enhanced charge transfer rate; therefore, a high photoelectrochemical activity under visible light irradiation could be achieved.

Lowering the onset potential of Zr-doped hematite nanocoral photoanodes by Al co-doping and surface modification with electrodeposited Co-Pi

Herein, in situ zirconium-doped hematite nanocoral (Zr-Fe₂O₃ (I) NC) photoanode was prepared via a specially designed diluted hydrothermal approach and modified with Al³⁺ co-doping and electrodeposited cobalt-phosphate ("Co-Pi") cocatalyst. Firstly, an unintentional in situ Zr-Fe₂O₃ (I)) NC photoanode was synthesized, which achieved an optimum photocurrent density of 0.27 mA/cm² at 1.0 V vs. RHE but possessed a more positively shifted onset potential than conventionally prepared hematite nanorod photoelectrodes. An optimized amount of aluminum co-doping suppresses the bulk as well as surface defects, which causes a negative shift in the onset potential from 0.85 V to 0.8 V vs. RHE and enhances the photocurrent density of Zr-Fe₂O₃(I) NC from 0.27 mA/cm² to 0.7 mA/cm² at 1.0 V vs. RHE. The electrodeposited Co-Pi modification further reduce the onset potential of Al co-doped Zr-Fe₂O₃(I) NC to 0.58 V vs. RHE and yield a maximum photocurrent of 1.1 mA/cm² at 1.0 V vs. RHE (1.8 mA/cm² at 1.23 V vs RHE). The improved photocurrent at low onset potential can be attributed to synergistic effect of Al co-doping and Co-Pi surface modification. Further, during photoelectrochemical water-splitting, a 137 and 67 μmol of hydrogen (H₂) and oxygen (O₂) evolution was achieved over the optimum Co-Pi-modified Al-co-doped Zr-Fe₂O₃(I) NC photoanode within 6 h. The proposed charge transfer mechanism in optimum Co-Pi-modified Alco-doped Zr-Fe₂O₃(I) NC photoanodes during the photoelectrochemical water splitting was also studied.

Structural, Optical and Photocatalytic Characterization of ZnxCd1−xS Solid Solutions Synthetized Using a Simple Ultrasonic Radiation Method

A simple ultrasonic radiation method was employed for the preparation of zinc and cadmium sulfide solid solution (ZnxCd1−xS; x = 0–0.25 wt.%) with the aim to investigate its efficiency for H2 production via a visible light-driven water-splitting reaction. The catalyst characterization by X-ray diffraction confirmed the formation of solid solution (ZnxCd1−xS) between CdS and ZnS phases. All catalysts exhibited hierarchical morphology (from SEM and TEM) formed by aggregated nanoparticles of ZnxCd1−xS solid solution with crystals showing mainly (111) planes of cubic CdS phase. The crystal size linearly decreased with an increase in Zn incorporation in the crystal lattice (from 4.37 nm to 3.72 nm). The ZnxCd1−xS photocatalysts showed a gradual increase in the H2 evolution, with an increase in the Zn concentration up to 0.2 wt.% making the most effective Zn0.2Cd0.8S catalyst toward H2 production. From the catalyst activity–structure correlation, it has been concluded that the twin-like CdS structure, the (111) plane and specific morphology are the main factors influencing the catalyst effectivity toward H2 production. All those factors compensated for the negative effect of an increase in band gap energy (Ebg) after ZnS incorporation into solid solution (from 2.21 eV to 2.34 eV). The effect of the catalyst morphology is discussed by comparing H2 evolution over unsupported and supported Zn0.2Cd0.8S solid solutions.

n-p Heterojunction of TiO2-NiO core-shell structure for efficient hydrogen generation and lignin photoreforming

Hydrogen evolution from biomass photoreforming has been widely recognized as a promising strategy for relieving the pressure from energy crisis and environmental pollution, as it could generate sustainable H₂ and value-added bioproducts simultaneously. Combining p-type semiconductors with n-type semiconductors to form n-p heterojunction is an effective strategy to improve the photocatalytic quantum efficiency by enhancing the separation of photogenerated electrons and holes, which could greatly facilitate the realization of such biomass photorefinery concept. However, the incompact contact between the n-type and p-type semiconductors often induces the aggregation of photogenerated electrons and holes. In this work, we design and synthesize an ultrafine n-p heterojunction TiO₂-NiO core-shell structure to overcome the incompact contact in the n-p interface. When the n-p heterojunction photocatalysts are evaluated for photocatalytic water splitting and biomass lignin photoreforming respectively, the as-fabricated TiO₂-NiO nanocomposite with 3.25% NiO demonstrates the highest hydrogen generation of 23.5 mmol h^-1 g^-1 from water splitting and H₂ (0.45 mmol h^-1 g^-1) and CH₄ (0.03 mmol h^-1 g^-1) cogeneration with reasonable amount of fatty acids (palmitic acid and stearic acid) production from lignin photoreforming. The excellent photocatalytic activity is ascribed to the synergistic effects of high crystallinity of TiO₂ ultrafine nanoparticles, core-shell structure and n-p heterojunction with NiO nanoclusters. This present work demonstrates a simple and efficient method to fabricate ultrafine n-p heterojunction core-shell structure for noble-metal free catalyst for both water splitting and biomass photoreforming.

One-step synthesis of novel Cu2ZnNiO3 complex oxide nanowires with tuned band gap for photoelectrochemical water splitting

Although alloying and nanostructuring offer a great opportunity for enhancing photoelectrochemical behavior and band gap tuning, these methods have not been investigated extensively. This article reports the synthesis of Cu2ZnNiO3 complex oxide nanowires (∼200 nm) grown on German silver alloy via a one-step optimized hydrothermal route and their utilization to split water photoelectrochemically. Surface characterizations were used to elucidate the formation mechanism of the Cu2ZnNiO3 complex oxide nanowires. The nanowires exhibited an exceptional visible light absorption extending from 400 to 1400 nm wavelengths with a tuned band gap of ∼2.88 eV calculated from the corresponding Tauc plot. In tests to split water photoelectrochemically, the nanowires generated a significant photocurrent of up to −2.5 mA cm−2 at −0.8 V versus Ag/AgCl and exhibited an exceptional photostability which exceeded 2 h under light-off conditions with no photocurrent decay. Band edge positions related to water redox potentials were estimated via Mott–Schottky and diffuse reflectance spectroscopy analysis with the density of charge carriers reaching as high as 5.15 × 1018 cm−3. Moreover, the nanowires generated ∼1100 µmol of H2 in 5 h. These photoelectrochemical results are much higher than the reported values for similar structures of copper oxide, zinc oxide and nickel oxide separately under the same conditions, which can be attributed to the advantages of Cu, Zn and Ni oxides (such as visible light absorption, photostability, and efficient charge carrier generation and transport) being combined in one single material. These promising results make German silver a robust material toward photoelectrochemical water splitting.

Photocatalytic and Photoelectrochemical Systems: Similarities and Differences

Photocatalytic and photoelectrochemical processes are two key systems in harvesting sunlight for energy and environmental applications. As both systems are employing photoactive semiconductors as the major active component, strategies have been formulated to improve the properties of the semiconductors for better performances. However, requirements to yield excellent performances are different in these two distinctive systems. Although there are universal strategies applicable to improve the performance of photoactive semiconductors, similarities and differences exist when the semiconductors are to be used differently. Here, considerations on selected typical factors governing the performances in photocatalytic and photoelectrochemical systems, even though the same type of semiconductor is used, are provided. Understanding of the underlying mechanisms in relation to their photoactivities is of fundamental importance for rational design of high-performing photoactive materials, which may serve as a general guideline for the fabrication of good photocatalysts or photoelectrodes toward sustainable solar fuel generation.

Synergistic effect of Ni–Ag–rutile TiO2 ternary nanocomposite for efficient visible-light-driven photocatalytic activity

P25 comprising of mixed anatase and rutile phases is known to be highly photocatalytically active compared to the individual phases. Using a facile wet chemical method, we demonstrate a ternary nanocomposite consisting of Ni and Ag nanoparticles, decorated on the surface of XTiO₂ (X: P25, rutile (R)) as an efficient visible-light-driven photocatalyst. Contrary to the current perspective, RTiO₂-based Ni–Ag–RTiO₂ shows the highest activity with the H₂ evolution rate of ∼86 μmol g⁻¹ W⁻¹ h⁻¹@535 nm. Together with quantitative assessment of active Ni, Ag and XTiO₂ in these ternary systems using high energy synchrotron X-ray diffraction, transmission electron microscopy coupled energy dispersive spectroscopy mapping evidences the metal to semiconductor contact via Ag. The robust photocatalytic activity is attributed to the improved visible light absorption, as noted by the observed band edge of ∼2.67 eV corroborating well with the occurrence of Ti³⁺ in Ti 2p XPS. The effective charge separation due to intimate contact between Ni and RTiO₂via Ag is further evidenced by the plasmon loss peak in Ag 3d XPS. Moreover, density functional theory calculations revealed enhanced adsorption of H₂ on Ti₈O₁₆ clusters when both Ag and Ni are simultaneously present, owing to the hybridization of the metal atoms with d orbitals of Ti and p orbitals of O leading to enhanced bonding characteristics, as substantiated by the density of states. Additionally, the variation in the electronegativity in Bader charge analysis indicates the possibility of hydrogen evolution at the Ni sites, in agreement with the experimental observations.

Robust photocatalytic activity of Ni–Ag–RTiO₂ is attributed to the improved visible light absorption and effective charge separation due to intimate contact between Ni and RTiO₂via Ag, as evidenced by Ti³⁺ in Ti 2p XPS and energy dispersive mapping.

First-principles studies on α-Fe2O3 surface slabs and mechanistic elucidation of a g-C3N4/α-Fe2O3 heterojunction

First-principles calculations were carried out to explore the surface energies and electronic properties of α-Fe₂O₃ surface slabs. Further, to enhance the photocatalytic activity of Fe₂O₃, an alternative effective strategy was to examine Fe₂O₃-based heterostructures.

Current progress in developing metal oxide nanoarrays-based photoanodes for photoelectrochemical water splitting

Solar energy driven photoelectrochemical (PEC) water splitting is a clean and powerful approach for renewable hydrogen production. The design and construction of metal oxide based nanoarray photoanodes is one of the promising strategies to make the continuous breakthroughs in solar to hydrogen conversion efficiency of PEC cells owing to their owned several advantages including enhanced reactive surface at the electrode/electrolyte interface, improved light absorption capability, increased charge separation efficiency and direct electron transport pathways. In this Review, we first introduce the structure, work principle and their relevant efficiency calculations of a PEC cell. We then give a summary of the state-of the-art research in the preparation strategies and growth mechanism for the metal oxide based nanoarrays, and some details about the performances of metal oxide based nanoarray photoanodes for PEC water splitting. Finally, we discuss key aspects which should be addressed in continued work on realizing high-efficiency metal oxide based nanoarray photoanodes for PEC solar water splitting systems.

A pH-sensitive coordination polymer network-based nanoplatform for magnetic resonance imaging-guided cancer chemo-photothermal synergistic therapy

Developing various kinds of nanoplatforms with integrated diagnostic and therapeutic functions would be significant for imaging-guided precision treatment of cancer. However, it is still a challenge to organically integrate therapeutic and imaging components into a single nano-system rather than simply mixing. Herein, an iron-gallic acid network-based nanoparticle (Fe-GA@PEG-PLGA) was designed for magnetic resonance imaging (MRI)-guided chemo-photothermal synergistic therapy of tumors. The tumor spatial location and size information can be accurately achieved due to T₁ MRI based on Fe³⁺ coordination with GA in Fe-GA network. Furthermore, the nanoparticle exhibited extraordinary photostability and photothermal therapy capacity exceeded 42 °C within 100 s under 808 nm laser irradiation. Meanwhile, the Fe-GA polymeric network can be disassembled in tumor acidic environment and the released drug GA can induce apoptosis. This study demonstrated that the Fe-GA network-based nanoparticle is a promising diagnostic and therapeutic agent for theranostic application and further clinic translation.

Rational Design of Photoelectrodes with Rapid Charge Transport for Photoelectrochemical Applications

Photoelectrode materials are the heart of photoelectrochemical (PEC) cells, which hold great promise to address global energy and environmental issues by converting solar energy into electricity or chemical fuels. In recent decades, significant research efforts have been devoted to the design and construction of photoelectrodes for the efficient generation and utilization of charge carriers to boost PEC performance. Herein, insights from a literature study on the relationship between the architecture and charge dynamics of photoelectrodes are presented. After briefly introducing the fundamental theories of charge dynamics in nanostructured photoelectrodes, the development of photoelectrode design in 1D polycrystalline nanotube arrays, 1D single-crystalline nanowire arrays, and hierarchical and mesoporous nanowire arrays is reviewed with a focus on the interplay between architecture and charge transport properties. For each design, commonly used synthetic approaches and the corresponding charge transport properties are discussed. Subsequently, the applications of these photoelectrodes in PEC systems are summarized. In conclusion, future challenges in the rational design of photoelectrode architecture are presented. The basic relationships between the architectures and charge dynamics of photoelectrode materials discussed here are expected to provide pertinent guidance and a reference for future advanced material design targeting improved light energy conversion systems.

Fully Depleted Ti-Nb-Ta-Zr-O Nanotubes: Interfacial Charge Dynamics and Solar Hydrogen Production

Poor kinetics of hole transportation at the electrode/electrolyte interface is regarded as a primary cause for the mediocre performance of n-type TiO₂ photoelectrodes. By adopting nanotubes as the electrode backbone, light absorption and carrier collection can be spatially decoupled, allowing n-type TiO₂, with its short hole diffusion length, to maximize the use of the available photoexcited charge carriers during operation in photoelectrochemical (PEC) water splitting. Here, we presented a delicate electrochemical anodization process for the preparation of quaternary Ti-Nb-Ta-Zr-O mixed-oxide (denoted as TNTZO) nanotube arrays and demonstrated their utility in PEC water splitting. The charge-transfer dynamics for the electrodes was investigated using time-resolved photoluminescence, electrochemical impedance spectroscopy, and the decay of open-circuit voltage analysis. Data reveal that the superior photoactivity of TNTZO over pristine TiO₂ originated from the introduction of Nd, Ta, and Zr elements, which enhanced the amount of accessible charge carriers, modified the electronic structure, and improved the hole injection kinetics for expediting water splitting. By modulating the water content of the electrolyte employed in the anodization process, the wall thickness of the grown TNTZO nanotubes can be reduced to a size smaller than that of the depletion layer thickness, realizing a fully depleted state for charge carriers to further advance the PEC performance. Hydrogen evolution tests demonstrate the practical efficacy of TNTZO for realizing solar hydrogen production. Furthermore, with the composition complexity and fully depleted band structure, the present TNTZO nanotube arrays may offer a feasible and universal platform for the loading of other semiconductors to construct a sophisticated heterostructure photoelectrode paradigm, in which the photoexcited charge carriers can be entirely utilized for efficient solar-to-fuel conversion.

Degradation of Methylene Blue Dye in the Presence of Visible Light Using SiO₂@α-Fe₂O₃ Nanocomposites Deposited on SnS₂ Flowers

Semiconductor materials have been shown to have good photocatalytic behavior and can be utilized for the photodegradation of organic pollutants. In this work, three-dimensional flower-like SnS₂ (tin sulfide) was synthesized by a facile hydrothermal method. Core-shell structured SiO₂@α-Fe₂O₃ nanocomposites were then deposited on the top of the SnS₂ flowers. The as-synthesized nanocomposites were characterized by X-ray diffraction (XRD), Raman spectroscopy, field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), UV–Vis Spectroscopy, Brunauer–Emmett–Teller (BET) surface area analysis, and photoluminescence (PL) spectroscopy. The photocatalytic behavior of the SnS₂-SiO₂@α-Fe₂O₃ nanocomposites was investigated by observing the degradation of methylene blue (MB). The results show an effective enhancement of photocatalytic activity for the degradation of MB especially for the 15 wt % SiO₂@α-Fe₂O₃ nanocomposites on SnS₂ flowers.

Core-shell titanium dioxide-titanium nitride nanotube arrays with near-infrared plasmon resonances

Titanium nitride (TiN) is a ceramic with high electrical conductivity which in nanoparticle form, exhibits localized surface plasmon resonances (LSPRs) in the visible region of the solar spectrum. The ceramic nature of TiN coupled with its dielectric loss factor being comparable to that of gold, render it attractive for CMOS polarizers, refractory plasmonics, surface-enhanced Raman scattering and a whole host of sensing applications. We report core-shell TiO₂-TiN nanotube arrays exhibiting LSPR peaks in the range 775-830 nm achieved by a simple, solution-based, low cost, large area-compatible fabrication route that does not involve laser-writing or lithography. Self-organized, highly ordered TiO₂ nanotube arrays were grown by electrochemical anodization of Ti thin films on fluorine-doped tin oxide-coated glass substrates and then conformally coated with a thin layer of TiN using atomic layer deposition. The effects of varying the TiN layer thickness and thermal annealing on the LSPR profiles were also investigated. Modeling the TiO₂-TiN core-shell nanotube structure using two different approaches, one employing effective medium approximations coupled with Fresnel coefficients, resulted in calculated optical spectra that closely matched the experimentally measured spectra. Modeling provided the insight that the observed near-infrared resonance was not collective in nature, and was mainly attributable to the longitudinal resonance of annular nanotube-like TiN particles redshifted due to the presence of the higher permittivity TiO₂ matrix. The resulting TiO₂-TiN core-shell nanotube structures also function as visible light responsive photocatalysts, as evidenced by their photoelectrochemical water-splitting performance under light emitting diode illumination using 400, 430 and 500 nm photons.

Improved electron-hole separation and migration in anatase TiO2 nanorod/reduced graphene oxide composites and their influence on photocatalytic performance

The as-synthesized TiO₂ nanorods a-TNR (amorphous TiO₂ layer covering the crystalline anatase TiO₂ core) and TNR (fully crystalline anatase TiO₂) were decorated with reduced graphene oxide (rGO) to synthesize two series of TiO₂ + rGO composites with different nominal loadings of GO (from 4 to 20 wt%). The structural, surface and electronic properties of the obtained TiO₂ + rGO composites were analyzed and correlated to their performance in the photocatalytic oxidation of aqueous bisphenol A solution. X-ray photoelectron spectroscopy (XPS) analyses revealed that charge separation in TiO₂ + rGO composites is improved due to the perfect matching of TiO₂ and rGO valence band maxima (VBM). Cyclic voltammetry (CV) experiments revealed that the peak-to-peak separations (ΔE_p) are the lowest and the oxidation current densities are the highest for composites with a nominal 10 wt% GO content, meaning that it is much easier for the charge carriers to percolate through the solid, resulting in improved charge migration. Due to the high charge carrier mobility in rGO and perfect VBM matching between TiO₂ and rGO, the electron-hole recombination in composites was suppressed, resulting in more electrons and holes being able to participate in the photocatalytic reaction. rGO amounts above 10 wt% decreased the photocatalytic activity; thus, it is critical to optimize its amount in the TiO₂ + rGO composites for achieving the highest photocatalytic activity. BPA degradation rates correlated completely with the results of the CV measurements, which directly evidenced improved charge separation and migration as the crucial parameters governing photocatalysis.

Surviving High-Temperature Calcination: ZrO2 -Induced Hematite Nanotubes for Photoelectrochemical Water Oxidation

Nanotubular Fe₂ O₃ is a promising photoanode material, and producing morphologies that withstand high-temperature calcination (HTC) is urgently needed to enhance the photoelectrochemical (PEC) performance. This work describes the design and fabrication of Fe₂ O₃ nanotube arrays that survive HTC for the first time. By introducing a ZrO₂ shell on hydrothermal FeOOH nanorods by atomic layer deposition, subsequent high-temperature solid-state reaction converts FeOOH-ZrO₂ nanorods to ZrO₂ -induced Fe₂ O₃ nanotubes (Zr-Fe₂ O₃ NTs). The structural evolution of the hematite nanotubes is systematically explored. As a result of the nanostructuring and shortened charge collection distance, the nanotube photoanode shows a greatly improved PEC water oxidation activity, exhibiting a photocurrent density of 1.5 mA cm^-2 at 1.23 V (vs. reversible hydrogen electrode, RHE), which is the highest among hematite nanotube photoanodes without co-catalysts. Furthermore, a Co-Pi decorated Zr-Fe₂ O₃ NT photoanode reveals an enhanced onset potential of 0.65 V (vs. RHE) and a photocurrent of 1.87 mA cm^-2 (at 1.23 V vs. RHE).

Top-down fabrication of fluorine-doped tin oxide nanopillar substrates for solar water splitting

Nanopillar fluorine-doped tin oxide (FTO) substrates fabricated by nanosphere lithography and argon milling enhance the photoelectrochemical performance of WO₃ photoanodes.

High-efficiency photoelectrochemical hydrogen generation enabled by p-type semiconductor nanoparticle-decorated n-type nanotube arrays

A photoelectrocatalytic hydrogen production rate of 37.8 μmol h⁻¹ cm⁻² was obtained by a newly designed NiO nanoparticle modified TiO₂ nanotube array photoanode.

Band alignment investigations of heterostructure NiO/TiO2 nanomaterials used as efficient heterojunction earth-abundant metal oxide photocatalysts for hydrogen production

Earth-abundant NiO/TiO₂ heterostructures lead to enhanced H₂ production by methanol photoreforming due to favorable band bending at the interface of the NiO/anatase TiO₂ p–n heterojunction.

Defect-induced enhanced photocatalytic activities of reduced α-Fe2O3 nanoblades

Bicrystalline α-Fe2O3 nanoblades (NBs) synthesized by thermal oxidation of iron foils were reduced in vacuum, to study the effect of reduction treatment on microstructural changes and photocatalytic properties. After the vacuum reduction, most bicrystalline α-Fe2O3 NBs transform into single-layered NBs, which contain more defects such as oxygen vacancies, perfect dislocations and dense pores. By comparing the photodegradation capability of non-reduced and reduced α-Fe2O3 NBs over model dye rhodamine B (RhB) in the presence of hydrogen peroxide, we find that vacuum-reduction induced microstructural defects can significantly enhance the photocatalytic efficiency. Even after 10 cycles, the reduced α-Fe2O3 NBs still show a very high photocatalytic activity. Our results demonstrate that defect engineering is a powerful tool to enhance the photocatalytic performance of nanomaterials.

Carbon and metal nanotube hybrid structures on graphene as efficient electron field emitters

We report a facile and efficient method for the fabrication of highly-flexible field emission devices by forming tubular hybrid structures based on carbon nanotubes (CNTs) and nickel nanotubes (Ni NTs) on graphene-based flexible substrates. By employing an infiltration process in anodic alumina oxide (AAO) templates followed by Ni electrodeposition, we could fabricate CNT-wrapped Ni NT/graphene hybrid structures. During the electrodeposition process, the CNTs served as Ni nucleation sites, resulting in a large-area array of high aspect-ratio field emitters composed of CNT-wrapped Ni NT hybrid structures. As a proof of concepts, we demonstrate that high-quality flexible field emission devices can be simply fabricated using our method. Remarkably, our proto-type field emission devices exhibited a current density higher by two orders of magnitude compared to other devices fabricated by previous methods, while maintaining its structural integrity in various bending deformations. This novel fabrication strategy can be utilized in various applications such as optoelectronic devices, sensors and energy storage devices.

Fe3+-Doped TiO₂ Nanotube Arrays on Ti-Fe Alloys for Enhanced Photoelectrocatalytic Activity

Highly ordered, vertically oriented Fe³⁺-doped TiO₂ nanotube arrays (Fe-TNTs) were prepared on Ti-Fe alloy substrates with different Fe contents by the electrochemical anodization method. The as-prepared Fe-TNTs were characterized by scanning electron microscope (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and related electrochemical techniques. XPS results demonstrated that Fe³⁺ ions were successfully doped into TiO₂ nanotubes. The photoelectrochemical activity of Fe-TNTs was compared with that of pure TiO₂ nanotube arrays (TNTs). The results showed that Fe-TNTs grown on low concentration (0.5 wt %–1 wt % Fe) Ti-Fe alloys possessed higher photocurrent density than TNTs. The Fe-TNTs grown on Ti-Fe alloy containing 0.8 wt % Fe exhibited the highest photoelectrochemical activity and the photoelectrocatalytic degradation rate of methylene blue (MB) aqueous solution was significantly higher than that of TNTs.