Unique magnetic properties of single crystal γ-Fe2O3 nanowires synthesized by flame vapor deposition

Uncovering the Size-Dependent Thermal Solid Transformation of Akaganéite

Investigating the structural evolution and phase transformation of iron oxides is crucial for gaining a deeper understanding of geological changes on diverse planets and preparing oxide materials suitable for industrial applications. In this study, in-situ heating techniques are employed in conjunction with transmission electron microscopy (TEM) observations and ex-situ characterization to thoroughly analyze the thermal solid-phase transformation of akaganéite 1D nanostructures with varying diameters. These findings offer compelling evidence for a size-dependent morphology evolution in akaganéite 1D nanostructures, which can be attributed to the transformation from akaganéite to maghemite (γ-Fe2O3) and subsequent crystal growth. Specifically, it is observed that akaganéite nanorods with a diameter of ∼50 nm transformed into hollow polycrystalline maghemite nanorods, which demonstrated remarkable stability without arresting crystal growth under continuous heating. In contrast, smaller akaganéite nanoneedles or nanowires with a diameter ranging from 20 to 8 nm displayed a propensity for forming single-crystal nanoneedles or nanowires through phase transformation and densification. By manipulating the size of the precursors, a straightforward method is developed for the synthesis of single-crystal and polycrystalline maghemite nanowires through solid-phase transformation. These significant findings provide new insights into the size-dependent structural evolution and phase transformation of iron oxides at the nanoscale.

Pharmaceutical Quality by Design Approach to Develop High-Performance Nanoparticles for Magnetic Hyperthermia

Magnetic hyperthermia holds significant therapeutic potential, yet its clinical adoption faces challenges. One obstacle is the large-scale synthesis of high-quality superparamagnetic iron oxide nanoparticles (SPIONs) required for inducing hyperthermia. Robust and scalable manufacturing would ensure control over the key quality attributes of SPIONs, and facilitate clinical translation and regulatory approval. Therefore, we implemented a risk-based pharmaceutical quality by design (QbD) approach for SPION production using flame spray pyrolysis (FSP), a scalable technique with excellent batch-to-batch consistency. A design of experiments method enabled precise size control during manufacturing. Subsequent modeling linked the SPION size (6-30 nm) and composition to intrinsic loss power (ILP), a measure of hyperthermia performance. FSP successfully fine-tuned the SPION composition with dopants (Zn, Mn, Mg), at various concentrations. Hyperthermia performance showed a strong nonlinear relationship with SPION size and composition. Moreover, the ILP demonstrated a stronger correlation to coercivity and remanence than to the saturation magnetization of SPIONs. The optimal operating space identified the midsized (15-18 nm) Mn0.25Fe2.75O4 as the most promising nanoparticle for hyperthermia. The production of these nanoparticles on a pilot scale showed the feasibility of large-scale manufacturing, and cytotoxicity investigations in multiple cell lines confirmed their biocompatibility. In vitro hyperthermia studies with Caco-2 cells revealed that Mn0.25Fe2.75O4 nanoparticles induced 80% greater cell death than undoped SPIONs. The systematic QbD approach developed here incorporates process robustness, scalability, and predictability, thus, supporting the clinical translation of high-performance SPIONs for magnetic hyperthermia.

Directional growth of iron oxide nanowires on a vicinal copper surface

Single-crystal magnetic nanostructures with well-defined shapes attract lots of interest due to their potential applications in magnetic and spintronic devices. However, development of methods allowing controlling their mutual crystallographic and geometric orientation constitutes a significant scientific challenge. One of the routes for obtaining such structures is to grow the materials epitaxially on naturally-structured supports, such as vicinal surfaces of single-crystal substrates. Iron oxides are among the most well-known magnetic materials which, depending on the phase, may exhibit ferro/ferri- or antiferromagnetic ordering. We have grown iron oxide nanowires on a Cu(410) single-crystal substrate faceted with molecular oxygen. Scanning tunneling microscopy and low energy electron diffraction revealed that the oxide grows in the [111] direction, along the step edges of the substrate and rotated by ±15° with respect to the [010] direction of copper atomic terraces (so that the the growing elongated structures are orientated parallel to each other). Notably, x-ray photoelectron spectroscopy confirmed that the nanowires represent the ferrimagneticγ-Fe2O3(maghemite) iron oxide phase, while micromagnetic simulations indicated that the wires are single-domain, with the easy magnetization axis orientated in-plane and along the long axis of the wire.

A Review on 1-D Nanomaterials: Scaling-Up with Gas-Phase Synthesis

Nanowire-like materials exhibit distinctive properties comprising optical polarisation, waveguiding, and hydrophobic channelling, amongst many other useful phenomena. Such 1-D derived anisotropy can be further enhanced by arranging many similar nanowires into a coherent matrix, known as an array superstructure. Manufacture of nanowire arrays can be scaled-up considerably through judicious use of gas-phase methods. Historically, the gas-phase approach however has been extensively used for the bulk and rapid synthesis of isotropic 0-D nanomaterials such as carbon black and silica. The primary goal of this review is to document recent developments, applications, and capabilities in gas-phase synthesis methods of nanowire arrays. Secondly, we elucidate the design and use of the gas-phase synthesis approach; and finally, remaining challenges and needs are addressed to advance this field.

Neurotherapeutic efficacy of loaded sulforaphane on iron oxide nanoparticles against cuprizone-induced neurotoxicity: role of MMP-9 and S100β

Cuprizone (CUP) induces neurotoxicity and demyelination in animal models by provoking the activation of glial cells and the generation of reactive oxygen species (ROS). Sulforaphane (SF) is a phytochemical that exhibits a neuroprotective potential. In this study, we investigated the neurotherapeutic and pro-remyelinating activities of SF and SF-loaded within iron oxide nanoparticles (IONP-SF) in CUP-exposed rats. Magnetite iron oxide nanoparticles (IONPs) were prepared using the hydrothermal method that was further loaded with SF (IONP-SF). The loading of SF within the magnetite nanoparticles was assessed using FTIR, TEM, DLS, Zetasizer, and XPS. For the in vivo investigations, adult male Wistar rats (n = 40) were administrated either on a regular diet or a diet with CUP (0.2%) for 5 weeks. The rats were divided into four groups: negative control, CUP-induced, CUP + SF, and CUP + IONP-SF. CUP-exposed brains exhibited a marked elevation in lipid peroxidation, along with a significant decrease in the activities of glutathione peroxidase (GPx), and catalase (CAT). In addition, CUP intoxication downregulated the expression of myelin basic protein (MBP) and myelin proteolipid protein (PLP), upregulated the expression of Matrix metallopeptidase-9 (MMP-9) and S100β, and increased caspase-3 immunoexpression, these results were supported histopathologically in the cerebral cortexes. Treatment of CUP-rats with either SF or IONP-SF demonstrated remyelinating and neurotherapeutic activities. We could conclude that IONP-SF was more effective than free SF in mitigating the CUP-induced downregulation of MBP, upregulation of S100β, and caspase-3 immunoexpression.

Deep eutectic solvent electrolysis for preparing water-soluble magnetic iron oxide nanoparticles

Magnetic iron oxide nanoparticles have been proven to have versatile applications in biomedicine. Although numerous strategies have been developed to synthesize hydrophilic magnetic nanoparticles, there is still a challenge in the quantity and controllability of preparation of highly dispersible, stably water-dispersive magnetic nanoparticles. The current work presents a deep-eutectic solvent electrolysis to synthesize magnetic nanoparticles. In the electrolysis process, iron atoms at the anode electrode are oxidized to ferric ions, and then the ferric ions are combined with reactive oxygen species that derived from the decomposition of deep-eutectic solvents to form iron oxide nanocrystals. Concomitantly, hydrophilic radicals of amine groups produced by electrolyte decomposition are grafted on the particles. The monodisperse nanoparticle size ranged from 6 to 9 nm. The hydrophilic group loaded nanoparticles can be highly dispersed in water with neither surface post-modification nor organic stabilizers. The hydrodynamic particle diameter is between 20 and 30 nm. The transparent aqueous dispersions can be maintained for more than 600 days without precipitation.

Enhanced Removal of Methyl Violet Dye from Aqueous Solution by a Novel Co3O4@SiO2@TiO2-Ag Heterogeneous Semiconductor

BACKGROUND

This research introduces the application of a novel photocatalyst including Co₃O@SiO₂@TiO₂-Ag nanocomposite with highly photocatalytic stability and core-shell structure for the removal of toxic methyl violet from aqueous solution.

OBJECTIVE

The removal of toxic dyes and organic contaminants from water is outstanding research area between scientists. Methyl violet as a toxic cationic pollutant has disruptive influence for humans. In this research, with a aim to remove to methyl violet from the wastewater we developed a new photocatalyst including Co₃O₄@SiO₂@TiO₂-Ag nanocomposite as a eco-friendly and low-cost nanostructure with high photocatalytic activity in order to reduce the risks of this pollutant from aqueous media.

METHODS

The Co₃O₄@SiO₂@TiO₂-Ag nanostructure was prepared via hydrothermal and sol-gel methods and the structure elucidation of the prepared photocatalyst was analyzed by different spectroscopy techniques including XRD, FT-IR, FE-SEM, TEM, VSM and EDX.

RESULTS

Photodegradation of methyl violet in the presence of different structures showed that Co₃O₄@SiO₂@TiO₂-Ag is superior photocatalytic activity (about 98% was decomposed after 40 min) compared to the previous shells and pure Co₃O₄ NPs. Loadings of SiO₂@TiO₂-Ag nanocomposite over the Co3O4 surface led to the reduction in the band gap energy of visible light and improvement in the photocatalytic activity of Methyl Violet dye for the aqueous phase decomposition.

CONCLUSION

The remarkable benefits of this nanocomposite are highly photocatalytic efficiency in the degradation of methyl violet (almost 100 % within 1 h), easy magnetic separation, low cost, and high chemical stability. The collected results demonstrated the rate of degradation is increased by increasing the irradiation time, while the rate of degradation is decreased by dye concentration.

A review of green methods for phyto-fabrication of hematite (α-Fe2O3) nanoparticles and their characterization, properties, and applications

The aim of the current work is the introduction of a quick and simple literature survey about the bio-fabrication of the Alpha Hematite nanoparticles (α-Fe₂O₃) using the plant extracts green method. The survey manifested the utilities of the environmentally friendly biosynthesis methods via extracting different plant species, some of its important physicochemical properties, various instrumental analysis characterization tools, and potential applications.

Magnetic γFe2O3@Sh@Cu2O: an efficient solid-phase catalyst for reducing agent and base-free click synthesis of 1,4-disubstituted-1,2,3-triazoles

A hybrid magnetic material γFe₂O₃@Sh@cu₂O was easily prepared from Shilajit (Sh) decorated Fe₃O₄ and copper acetate. The prepared magnetic hybrid material was fully characterized using different analysis, including Fourier transform infrared (FT-IR), X-ray diffraction (XRD), inductively coupled plasma (ICP), scanning electron microscopy (SEM), Energy-dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS), vibrating sample magnetometer (VSM) thermal gravimetric analysis (TGA) and Brunauer–Emmett–Teller (BET). All these analysis revealed that during coating of Fe₃O₄@Sh using copper salt (II), synchronized redox sorption of Cu^II to Cu^I occurs at the same time as the oxidation of Fe₃O₄ to γFe₂O₃. This magnetic catalyst exhibited excellent catalytic activity for regioselective synthesis of 1,4-disubstituted-1,2,3-triazoles via one pot three-component click reaction of sodium azide, terminal alkynes and benzyl halides in the absence of any reducing agent. High yields, short reaction time, high turnover number and frequency (TON = 3.5 * 10⁵ and TOF = 1.0 * 10⁶ h⁻¹ respectively), easy separation, and efficient recycling of the catalyst are the strengths of the present method.

Applied Stress-Assisted Growth of Single Crystal γ-Fe₂O₃ Nanowires

It is difficult to obtain γ-Fe₂O₃ nanostructures by heating iron substrate in ambient conditions because γ-Fe₂O₃ is less thermodynamically stable than α-Fe₂O₃. In this work, we synthesize γ-Fe₂O₃ nanowires by heating iron particles under an external force. The stacking style of iron and oxygen ions under a strong shearing stress tends to adopt the γ-Fe₂O₃ structure regardless of the thermodynamic restriction. These γ-Fe₂O₃ nanowires exhibit a clear ferromagnetic property. Transmission electron microscopy (TEM) and X-ray diffraction (XRD) measurements confirm that γ-phase structure appears only under the applied external force during the heating period. A window of the magnitude of the external force is found to help the nanowire growth on iron particles. The growth mechanism of γ-Fe₂O₃ nanowires other than α-Fe₂O₃ under the external force is discussed and an applied stress-assisted growth model is proposed. This work presents an easy approach to produce ferromagnetic iron oxide nanowires on a large scale.

Rapid Flame Synthesis of Atomically Thin MoO3 down to Monolayer Thickness for Effective Hole Doping of WSe2

Two-dimensional (2D) molybdenum trioxide (MoO₃) with mono- or few-layer thickness can potentially advance many applications, ranging from optoelectronics, catalysis, sensors, and batteries to electrochromic devices. Such ultrathin MoO₃ sheets can also be integrated with other 2D materials (e.g., as dopants) to realize new or improved electronic devices. However, there is lack of a rapid and scalable method to controllably grow mono- or few-layer MoO₃. Here, we report the first demonstration of using a rapid (<2 min) flame synthesis method to deposit mono- and few-layer MoO₃ sheets (several microns in lateral dimension) on a wide variety of layered materials, including mica, MoS₂, graphene, and WSe₂, based on van der Waals epitaxy. The flame-grown ultrathin MoO₃ sheet functions as an efficient hole doping layer for WSe₂, enabling WSe₂ to reach the lowest sheet and contact resistance reported to date among all the p-type 2D materials (∼6.5 kΩ/□ and ∼0.8 kΩ·μm, respectively). These results demonstrate that flame synthesis is a rapid and scalable pathway to growing atomically thin 2D metal oxides, opening up new opportunities for advancing 2D electronics.

Boosting the photocatalytic H2 evolution activity of Fe2O3 polymorphs (α-, γ- and β-Fe2O3) by fullerene [C60]-modification and dye-sensitization under visible light irradiation

Different morphologies of Fe₂O₃ polymorphs were constructed and modified by fluorescein sensitization and C₆₀ cocatalyst to prepare highly active photocatalysts.

High saturation magnetization of γ-Fe2O3 nano-particles by a facile one-step synthesis approach

We have demonstrated the synthesis of γ-Fe₂O₃ nano-particles through a facile and novel calcination process in the air. There is no pH regulation, gas atmosphere, additive, centrifugation or other complicated procedures during the preparing process. A detailed formation process of the nano-particles is proposed, and DMF as a polar solvent may slower the reaction process of calcination. The structures, morphologies, and magnetic properties of γ-Fe₂O₃ nano-particles were investigated systematically, and the pure γ-Fe₂O₃ nano-particles obtained at 200 °C display uniform morphology good magnetic property. The saturation magnetization of obtained pure γ-Fe₂O₃ is about 74 emu/g, which is comparable with bulk material (76 emu/g) and larger than other results. In addition, the photocatalytic activity for degradation of methylene blue is also studied, which shows proper photocatalytic activity.

An effective way to increase the high-frequency permeability of Fe3O4 nanorods

Uniform Fe3O4 magnetic nanorods (NRs) were successfully synthesized and oriented in epoxy resin under a rotating magnetic field. Magnetic induction fields within and around a single Fe3O4 nanorod in the remanence state were obtained by off-axis electron holography. The induction fields indicated a single domain state of the highly anisotropic Fe3O4 nanorod due to its strong magnetic shape anisotropy. Quantitative magnetic moment analysis of the obtained phase image yielded an average magnetization of 0.53 T of a single Fe3O4 nanorod. Moreover, the real part of the permeability (μ') of magnetic-oriented Fe3O4 NRs is obviously higher than that of random Fe3O4 NRs in the GHz range. The oriented Fe3O4 NRs exhibit a higher resonance peak at 4.75 GHz compared to the bulk counterpart (1.2 GHz) in the frequency dependence of μ in the range of 1-10 GHz. Moreover, the calculated μ value of the oriented Fe3O4 NRs could be improved to 4.22 with the increased dipolar interaction strength using the OOMMF software. These results could play a guiding significance in the development of an effective method to improve the permeability of magnetic nanomaterials at GHz working frequency.

Rapid Synthesis of Thin and Long Mo17O47 Nanowire-Arrays in an Oxygen Deficient Flame

Mo17O47 nanowire-arrays are promising active materials and electrically-conductive supports for batteries and other devices. While high surface area resulting from long, thin, densely packed nanowires generally leads to improved performance in a wide variety of applications, the Mo17O47 nanowire-arrays synthesized previously by electrically-heated chemical vapor deposition under vacuum conditions were relatively thick and short. Here, we demonstrate a method to grow significantly thinner and longer, densely packed, high-purity Mo17O47 nanowire-arrays with diameters of 20-60 nm and lengths of 4-6 μm on metal foil substrates using rapid atmospheric flame vapor deposition without any chamber or walls. The atmospheric pressure and 1000 °C evaporation temperature resulted in smaller diameters, longer lengths and order-of-magnitude faster growth rate than previously demonstrated. As explained by kinetic and thermodynamic calculations, the selective synthesis of high-purity Mo17O47 nanowires is achieved due to low oxygen partial pressure in the flame products as a result of the high ratio of fuel to oxidizer supplied to the flame, which enables the correct ratio of MoO2 and MoO3 vapor concentrations for the growth of Mo17O47. This flame synthesis method is therefore a promising route for the growth of composition-controlled one-dimensional metal oxide nanomaterials for many applications.

Facile biosurfactant assisted biocompatible α-Fe2O3 nanorods and nanospheres synthesis, magneto physicochemical characteristics and their enhanced biomolecules sensing ability

Tunable magnetic and electrocatalytic characteristics of α-Fe₂O₃ nanostructures were fabricated by tapping saponin induced anisotropic growth, demonstrated excellent electrocatalytic activity towards dopamine and uric acid with wider potential gap.

A facile strategy for synthesis of spinel ferrite nano-granules and their potential applications

A number of spinel ferrite nano-granules were synthesized in DMF through a calcination process under air.

Combined flame and solution synthesis of nanoscale tungsten-oxide and zinc/tin-oxide heterostructures

Heterostructures of tungsten-oxide nanowires decorated with zinc/tin-oxide nanostructures are synthesized via a combined flame and solution synthesis approach. Vertically well-aligned tungsten-oxide nanowires are grown on a tungsten substrate by a flame synthesis method. Here, tetragonal WO(2.9) nanowires (diameters of 20-50 nm, lengths >10 μm, and coverage density of 10(9)-10(10) cm(-2)) are produced by the vapor-solid mechanism at 1720 K. Various kinds of Zn/Sn-oxide nanostructures are grown or deposited on the WO(2.9) nanowires by adjusting the Sn(2+) : Zn(2+) molar ratio in an aqueous ethylenediamine solution at 65 °C. With WO(2.9) nanowires serving as the base structures, sequential growth or deposition on them of hexagonal ZnO nanoplates, Zn(2)SnO(4) nanocubes, and SnO(2) nanoparticles are attained for Sn(2+) : Zn(2+) ratios of 0 : 1, 1 : 10, and 10 : 1, respectively, along with different saturation conditions. High-resolution transmission electron microscopy of the interfaces at the nanoheterojunctions shows abrupt interfaces for ZnO/WO(2.9) and Zn(2)SnO(4)/WO(2.9), despite lattice mismatches of >20%.

Preparation of a γ-Fe2 O3 /Ag nanowire coaxial nanocable for high-performance lithium-ion batteries

In this study, we report the design and synthesis of a silver nanowire-γ-Fe2 O3 coaxial nanocable architecture (Ag NWs@γ-Fe2 O3 nanocable) through mild oxidation of [Fe(CO)5 ] on the surface of silver nanowires followed by a calcination process. After optimization of the structural design, the Ag NWs@γ-Fe2 O3 nanocable could deliver superior lithium storage performance in terms of high reversible capacity, good rate performance, and excellent stability, such as a high reversible capacity of about 890 mA h g(-1) after 60 cycles at a current rate of 0.1 C (1.0 C=1005 mA g(-1) ). The reversible capacity remains as high as about 550 mA h g(-1) even at a high current rate of 2.0 C. This dramatic performance is mainly attributed to the smart coaxial design, which can not only alleviate the large volume change and prevent the aggregation of γ-Fe2 O3 nanoparticles, but also enables good conductivity and thus enhances fast charge transfer. The unique structural features of the Ag NWs@γ-Fe2 O3 nanocable represent a promising anode material in lithium-ion battery applications.

Synthesis, characterization and photocatalytic activity of magnetically separable γ-Fe2O3/N,Fe codoped TiO2 heterojunction for degradation of Reactive Blue 4 dye

Nanocrystalline undoped, N-doped and N,Fe codoped TiO₂ have been synthesized using a sol–gel method for the photocatalytic degradation of Reactive Blue 4 dye under visible light, with N,Fe codoped TiO₂ exhibiting the best activity.

Greener saponin induced morphologically controlled various polymorphs of nanostructured iron oxide materials for biosensor applications

Biological synthesis of three different polymorphs of iron oxide nanostructures in one-pot reaction through greener saponin have been fabricated for biomolecules determination.

One-pot synthesis of size- and morphology-controlled 1-D iron oxide nanochains with manipulated magnetic properties

Polypropylene grafted maleic anhydride (PP-MA, 2500 g mole(-1)) has demonstrated its unique capability to synthesize 1-D ferromagnetic hard (292.7 Oe) γ-Fe2O3 nanochains made of ~24 nm nanoparticles vs. PP-MA with 8000 g mole(-1) for the synthesis of 1-D ferromagnetic soft (70.5 Oe) γ-Fe2O3 nanochains (30 nm) made of flowerlike nanoparticles.

Simultaneously efficient light absorption and charge separation in WO3/BiVO4 core/shell nanowire photoanode for photoelectrochemical water oxidation

We report a scalably synthesized WO3/BiVO4 core/shell nanowire photoanode in which BiVO4 is the primary light-absorber and WO3 acts as an electron conductor. These core/shell nanowires achieve the highest product of light absorption and charge separation efficiencies among BiVO4-based photoanodes to date and, even without an added catalyst, produce a photocurrent of 3.1 mA/cm(2) under simulated sunlight and an incident photon-to-current conversion efficiency of ∼ 60% at 300-450 nm, both at a potential of 1.23 V versus RHE.

Combined flame and electrodeposition synthesis of energetic coaxial tungsten-oxide/aluminum nanowire arrays

A nanostructured thermite composite comprising an array of tungsten-oxide (WO2.9) nanowires (diameters of 20-50 nm and lengths of >10 μm) coated with single-crystal aluminum (thickness of ~16 nm) has been fabricated. The method involves combined flame synthesis of tungsten-oxide nanowires and ionic-liquid electrodeposition of aluminum. The geometry not only presents an avenue to tailor heat-release characteristics due to anisotropic arrangement of fuel and oxidizer but also eliminates or minimizes the presence of an interfacial Al2O3 passivation layer. Upon ignition, the energetic nanocomposite exhibits strong exothermicity, thereby being useful for fundamental study of aluminothermic reactions as well as enhancing combustion characteristics.

In situ deposition of hierarchical architecture assembly from Sn-filled CNTs for lithium-ion batteries

In this paper, we have demonstrated a hierarchical architecture assembly from Sn-filled CNTs, which was in situ deposited on Cu foils to form binder-free electrode by incorporating flame aerosol deposition (FAD) with chemical vapor deposition (CVD) processes. The reversible capacity of Sn-filled CNTs hierarchical architecture anode exhibited above 1000 mA h g(-1) before 30th cycle and stabilized at 437 mA h g(-1) after 100 cycles at a current density of 100 mA g(-1). Even at as high as 2 A g(-1), the capacity still maintained 429 mA h g(-1). The desirable cycling life and rate capacities performance were attributed to great confinement of tin in the interior of CNTs and the superior conducting network constructed by the 3D hierarchical architecture. The novel, rapid and scalable synthetic route was designed to prepare binder-free electrode with high electrochemical performance and avoid long-time mixing of active materials, binder, and carbon black, which is expected to be one of promising preparation of Sn/C anodes in lithium-ion batteries.

Three-dimensionally ordered macroporous iron oxide for removal of H2S at medium temperatures

A series of iron oxide sorbents with novel structures of three-dimensionally ordered macropores (3DOM), ranging in size from 60 to 550 nm, were fabricated and creatively used as sorbents for the removal of H2S at medium temperatures of 300-350 °C. Evaluation tests using thermogravimetric analysis (TGA) and a fixed-bed reactor showed that, in comparison to the iron oxide sorbent prepared by a conventional mixing method, the fabricated iron oxide sorbent with a 3DOM structure exhibited much higher reactivity and efficiency, as well as high sorbent utilization with low regeneration temperature. The excellent performance of 3DOM iron oxide as a sulfur sorbent is attributed to its special texture, i.e., the open and interconnected macroporous, large surface area, and nanoparticles of iron oxide, which are revealed by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and nitrogen adsorption techniques. The investigation results of the pore effect on the performance of the sorbent show that sorbents with pores size around 150 nm in diameter revealed the best performance. The reason is that pores of this size are large enough to allow gas to pass through even if the channel is partially blocked during the reaction process while remaining a large surface area that can provide more active sites for the reaction.

Magnetic stability of SnO₂ nanosheets

Room temperature ferromagnetism has been observed in freshly synthesized and post-annealed SnO₂ nanosheets. The results of x-ray diffraction and x-ray photoelectron spectroscopy reveal that the newly synthesized samples and those annealed at 400 °C under either an O₂ or Ar atmosphere possess rutile structure and no other impurity phases are observed. The fitting results of the O 1s and Sn 3d spectra from SnO₂ samples annealed at 400 °C under an O₂ or Ar atmosphere both indicate that oxygen vacancies inevitably exist in these samples. It is found that the saturation magnetization of all the annealed samples does not feature mono-dependence on oxygen vacancies, whereas an Sn vacancy related origin seems more plausible to account for variations in the magnetization of samples studied. This finding corresponds to first-principle calculation results from our previous work. Furthermore, the Curie temperature of SnO₂ nanosheets was estimated to be around 300 °C, rendering it a very good option for the next generation of spintronics.