Negative and positive persistent photoconductance in graphene

Understanding the emergence of negative photoconductivity in CVD grown ReS2 thin films by invoking the trion generation mechanism

Emerging from robust coulombic interactions and diminished dielectric screening, two-dimensional transition metal dichalcogenides (2D TMDs) manifest strongly bound excitons. While these pronounced many-body effects have been observed in 2D TMDs, their impact on the materials' intrinsic photoconductive characteristics remains relatively less explored. In this study, a considerable reduction in photoconductivity in chemical vapor deposited (CVD) ReS2 thin films has been observed. Through experimental and theoretical scrutiny, it is deduced that this anomalous phenomenon stems from the possible many-body interactions within the system, wherein photoexcited electron-hole pairs combine with excess electrons to generate trions. The formation of trions reduces the effective number of carriers contributing to photocurrent, thereby attenuating the photoconductivity. This study shows the profound influence of trions on the photoconductivity behaviour of ReS2 thin films, thereby elucidating their significance in modulating optical and electrical properties crucial for optoelectronic applications.

Negative Photoconductivity Transistors for Visuomorphic Computing

Visuomorphic computing aims to simulate and potentially surpass the human retina by mimicking biological visual perception with an artificial retina. Despite significant progress, challenges persist in perceiving complex interactive environments. Negative photoconductivity transistors (NPTs) mimic synaptic behavior by achieving adjustable positive photoconductivity (PPC) and negative photoconductivity (NPC), simulating "excitation" and "inhibition" akin to sensory cell signals. In complex interactive environments, NPTs are desired for visuomorphic computing that can achieve a better sense of information, lower power consumption, and reduce hardware complexity. In this review, it is started by introducing the development process of NPTs, while placing a strong emphasis on the device structures, working mechanisms, and key performance parameters. The common material systems employed in NPTs based on their functions are then summarized. Moreover, it is proceeded to summarize the noteworthy applications of NPTs in optoelectronic devices, including advanced multibit nonvolatile memory, optoelectronic logic gates, optical encryption, and visual perception. Finally, the challenges and prospects that lie ahead in the ongoing development of NPTs are addressed, offering valuable insights into their applications in optoelectronics and a comprehensive understanding of their significance.

Centimeter-Scale Tellurium Oxide Films for Artificial Optoelectronic Synapses with Broadband Responsiveness and Mechanical Flexibility

Prevailing over the bottleneck of von Neumann computing has been significant attention due to the inevitableness of proceeding through enormous data volumes in current digital technologies. Inspired by the human brain's operational principle, the artificial synapse of neuromorphic computing has been explored as an emerging solution. Especially, the optoelectronic synapse is of growing interest as vision is an essential source of information in which dealing with optical stimuli is vital. Herein, flexible optoelectronic synaptic devices composed of centimeter-scale tellurium dioxide (TeO2) films detecting and exhibiting synaptic characteristics to broadband wavelengths are presented. The TeO2-based flexible devices demonstrate a comprehensive set of emulating basic optoelectronic synaptic characteristics; i.e., excitatory postsynaptic current (EPSC), paired-pulse facilitation (PPF), conversion of short-term to long-term memory, and learning/forgetting. Furthermore, they feature linear and symmetric conductance synaptic weight updates at various wavelengths, which are applicable to broadband neuromorphic computations. Based on this large set of synaptic attributes, a variety of applications such as logistic functions or deep learning and image recognition as well as learning simulations are demonstrated. This work proposes a significant milestone of wafer-scale metal oxide semiconductor-based artificial synapses solely utilizing their optoelectronic features and mechanical flexibility, which is attractive toward scaled-up neuromorphic architectures.

Tunable Negative and Positive Photoconductance in Van Der Waals Heterostructure for Image Preprocessing

The processing of visual information occurs mainly in the retina, and the retinal preprocessing function greatly improves the transmission quality and efficiency of visual information. The artificial retina system provides a promising path to efficient image processing. Here, graphene/InSe/h-BN heterogeneous structure is proposed, which exhibits negative and positive photoconductance (NPC and PPC) effects by altering the strength of a single wavelength laser. Moreover, a modified theoretical model is presented based on the power-dependent photoconductivity effect of laser:I ph = - mP α 1 + nP α 2 ${\rm I}_{\rm ph}\,=\,-{\rm mP}^{\alpha _{1}} + {\rm nP}^{\alpha _{2}}$ , which can reveal the internal physical mechanism of negative/positive photoconductance effects. The present 2D structure design allows the field effect transistor (FET) to exhibit excellent photoelectric performance (RNPC = 1.1× 104 AW-1, RPPC = 13 AW-1) and performance stability. Especially, the retinal pretreatment process is successfully simulated based on the negative and positive photoconductive effects. Moreover, the pulse signal input improves the device responsivity by 167%, and the transmission quality and efficiency of the visual signal can also be enhanced. This work provides a new design idea and direction for the construction of artificial vision, and lay a foundation for the integration of the next generation of optoelectronic devices.

Negative Photoconductivity of Fe3GeTe2 Crystal with Native Heterostructure for Ultraviolet to Terahertz Ultra-Broadband Photodetection

Gaining insight into the photoelectric behavior of ferromagnetic materials is significant for comprehensively grasping their intrinsic properties and broadening future application fields. Here, through a specially designed Fe3GeTe2/O-Fe3GeTe2 heterostructure, first, the broad-spectrum negative photoconductivity phenomenon of ferromagnetic nodal line semimetal Fe3GeTe2 is reported that covers UV-vis-infrared-terahertz bands (355 nm to 3000 µm), promising to compensate for the inadequacies of traditional optoelectronic devices. The significant suppression of photoexcitation conductivity is revealed to arise from the semimetal/oxidation (sMO) interface-assisted dual-response mechanism, in which the electron excitation origins from the semiconductor photoconductivity effect in high-energy photon region, and semimetal topological band-transition in low-energy photon region. High responsivities ranging from 103 to 100 mA W-1 are acquired within ultraviolet-terahertz bands under ±0.1 V bias voltage at room temperature. Notably, the responsivity of 2.572 A W-1 at 3000 µm (0.1 THz) and the low noise equivalent power of 26 pW Hz-1/2 surpass most state-of-the-art mainstream terahertz detectors. This research provides a new perspective for revealing the photoelectric conversion properties of Fe3GeTe2 crystal and paves the way for the development of spin-optoelectronic devices.

Controllable Synthesis of 2H-1T' Mox Re(1- x ) S2 Lateral Heterostructures and Their Tunable Optoelectronic Properties

Constructing heterostructures and doping are valid ways to improve the optoelectronic properties of transition metal dichalcogenides (TMDs) and optimize the performance of TMDs-based photodetectors. Compared with transfer techniques, chemical vapor deposition (CVD) has higher efficiency in preparing heterostructures. As for the one-step CVD growth of heterostructures, cross-contamination between the two materials may occur during the growth process, which may provide the possibility of one-step simultaneous realization of controllable doping and formation of alloy-based heterostructures by finely tuning the growth dynamics. Here, 2H-1T' Mox Re(1- x ) S2 alloy-to-alloy lateral heterostructures are synthesized through this one-step CVD growth method, utilizing the cross-contamination and different growth temperatures of the two alloys. Due to the doping of a small amount of Re atoms in 2H MoS2 , 2H Mox Re(1- x ) S2 has a high response rejection ratio in the solar-blind ultraviolet (SBUV) region and exhibits a positive photoconductive (PPC) effect. While the 1T' Mox Re(1- x ) S2 formed by heavily doping Mo atoms into 1T' ReS2 will produce a negative photoconductivity (NPC) effect under UV laser irradiation. The optoelectronic property of 2H-1T' Mox Re(1- x ) S2 -based heterostructures can be modulated by gate voltage. These findings are expected to expand the functionality of traditional optoelectronic devices and have potential applications in optoelectronic logic devices.

Combining negative photoconductivity and resistive switching towards in-memory logic operations

A family of rudorffites based on silver-bismuth-iodide shows a transition from a conventional positive photoconductivity (PPC) to an unusual negative photoconductivity (NPC) upon variation in the precursor stoichiometry while forming the rudorffites. The NPC has arisen in silver-rich rudorffites due to the generation of illumination-induced trap-states which prompted the recombination of charge carriers and thereby a decrease in the conductivity of the compounds. In addition to photoconductivity, sandwiched devices based on all the rudorffites exhibited resistive switching between a pristine high resistive state (HRS) and a low resistive state (LRS) under a suitable voltage pulse; the switching process, which is reversible, is associated with a memory phenomenon. The devices based on NPC-exhibiting rudorffites switched to the HRS under illumination as well. That is, the resistive state of the devices could be controlled through both electrical and optical inputs. We employed such interesting optoelectronic properties of NPC-exhibiting rudorffites to exhibit OR logic gate operation. Because the devices could function as a logic gate and store the resistive state as well, we concluded that the materials could be an ideal candidate for in-memory logic operations.

All-Optically Controlled Artificial Synapses Based on Light-Induced Adsorption and Desorption for Neuromorphic Vision

Artificial synapses with the capability of optical sensing and synaptic functions are fundamental components to construct neuromorphic visual systems. However, most reported artificial optical synapses require a combination of optical and electrical stimuli to achieve bidirectional synaptic conductance modulation, leading to an increase in the processing time and system complexity. Here, an all-optically controlled artificial synapse based on the graphene/titanium dioxide (TiO2) quantum dot heterostructure is reported, whose conductance could be reversibly tuned by the effects of light-induced oxygen adsorption and desorption. Synaptic behaviors, such as excitatory and inhibitory, short-term and long-term plasticity, and learning-forgetting processes, are implemented using the device. An artificial neural network simulator based on the artificial synapse was used to train and recognize handwritten digits with a recognition rate of 92.2%. Furthermore, a 5 × 5 optical synaptic array that could simultaneously sense and memorize light stimuli was fabricated, mimicking the sensing and memory functionality of the retina. Such an all-optically controlled artificial synapse shows a promising prospect in the application of perception, learning, and memory tasks for future neuromorphic visual systems.

A facile covalent strategy for ultrafast negative photoconductance hybrid graphene/porphyrin-based photodetector

As a powerful complement to positive photoconductance (PPC), negative photoconductance (NPC) holds great potential for photodetector. However, the slow response of NPC relative to PPC devices limits their integration. Here, we propose a facile covalent strategy for an ultrafast NPC hybrid 2D photodetector. Our transistor-based graphene/porphyrin model device with a rise time of 0.2 ms and decay time of 0.3 ms has the fastest response time in the so far reported NPC hybrid photodetectors, which is attributed to efficient photogenerated charge transport and transfer. Both the photosensitive porphyrin with an electron-rich and large rigid structure and the built-in graphene frame with high carrier mobility are prone to the photogenerated charge transport. Especially, the intramolecular donor-acceptor system formed by graphene and porphyrin through covalent bonding promotes photoinduced charge transfer. This covalent strategy can be applied to other nanosystems for high-performance NPC hybrid photodetector.

Ultrafast and Polarization-Sensitive ReS2/ReSe2 Heterostructure Photodetectors with Ambipolar Photoresponse

Recently, two-dimensional (2D) van der Waals (vdWs) heterostructures provided excellent and fascinating platforms for advanced engineering in high-performance optoelectronic devices. Herein, novel ReS2/ReSe2 heterojunction phototransistors are constructed and explored systematically that display high responsivity, wavelength-dependent ambipolar photoresponse (negative and positive), ultrafast and polarization-sensitive detection capability. This photodetector exhibits a positive photoresponse from UV to visible spectrum (760 nm) with high photoresponsivities about 126.56 and 16.24 A/W under 350 and 638 nm light illumination, respectively, with a negative photoresponse over 760 nm, which is mainly ascribed to the ambipolar photoresponse modulated by gate voltage. In addition, profound linear polarization sensitivity is demonstrated with a dichroic ratio of about ∼1.2 at 638 nm and up to ∼2.0 at 980 nm, primarily owing to the wavelength-dependent absorption anisotropy and the stagger alignment of the crystal. Beyond static photodetection, the dynamic photoresponse of this vdWs device presents an ultrafast and repeatable photoswitching performance with a cutoff frequency (f3dB) exceeding 100 kHz. Overall, this study reveals the great potential of 2D ReX2-based vdWs heterostructures for high-performance, ultrafast, and polarization-sensitive broadband photodetectors.

All-Optical Reconfigurable Electronic Memory in a Graphene/SrTiO3 Heterostructure

Direct optical data coding in an electronic device is meaningful for photonic technology. Herein, we report electronic memory in a graphene/SrTiO₃ heterostructure, which presents the all-optical logic operation (encoding and decoding). The underlying physics have been elucidated in which the synergistic effect of surface localization with interface band bending is responsible for optical encoding and decoding in the electronic memory device of the graphene/SrTiO₃ heterostructure. Further, we demonstrate a robust retention and synaptic-like processing of optical signals, which may lead to significant applications in neuromorphic imaging sensors.

Tunable photoconductive devices based on graphene/WSe2 heterostructures

Optoelectronic tunability in van der Waals heterostructures is essential for their optoelectronic applications. In this work, tunable photoconductive properties were investigated in the heterostructures of WSe2 and monolayer graphene with different stacking orders on SiO2/Si substrates. Here, we demonstrated the effect of the material thickness of WSe2 and graphene on the interfacial charge transport, light absorption, and photoresponses. The results showed that the WSe2/graphene heterostructure exhibited positive photoconductivity after photoexcitation, while negative photoconductivity was observed in the graphene/WSe2 heterostructures. The tunable photoconductive behaviors provide promising potential applications of van der Waals heterostructures in optoelectronics. This work has guiding significance for the realization of stacking engineering in van der Waals heterostructures.

Ambipolar Photoresponsivity in an Ultrasensitive Photodetector Based on a WSe2/InSe Heterostructure by a Photogating Effect

Ambipolar photoresponsivity mainly originates from intrinsic or interfacial defects. However, these defects are difficult to control and will prolong the response speed of the photodetector. Here, we demonstrate tunable ambipolar photoresponsivity in a photodetector built from vertical p-WSe₂/n-InSe heterostructures with photogating effect, exhibiting ultrahigh photoresponsivity from -1.76 × 10⁴ to 5.48 × 10⁴ A/W. Moreover, the photodetector possesses broadband photodetection (365-965 nm), an ultrahigh specific detectivity (D*) of 5.8 × 10¹³ Jones, an external quantum efficiency of 1.86 × 10⁷%, and a rapid response time of 20.8 ms. The WSe₂/InSe vertical architecture has promising potential in developing high-performance nano-optoelectronics.

Emerging 2D Memory Devices for In-Memory Computing

It is predicted that the conventional von Neumann computing architecture cannot meet the demands of future data-intensive computing applications due to the bottleneck between the processing and memory units. To try to solve this problem, in-memory computing technology, where calculations are carried out in situ within each nonvolatile memory unit, has been intensively studied. Among various candidate materials, 2D layered materials have recently demonstrated many new features that have been uniquely exploited to build next-generation electronics. Here, the recent progress of 2D memory devices is reviewed for in-memory computing. For each memory configuration, their operation mechanisms and memory characteristics are described, and their pros and cons are weighed. Subsequently, their versatile applications for in-memory computing technology, including logic operations, electronic synapses, and random number generation are presented. Finally, the current challenges and potential strategies for future 2D in-memory computing systems are also discussed at the material, device, circuit, and architecture levels. It is hoped that this manuscript could give a comprehensive review of 2D memory devices and their applications in in-memory computing, and be helpful for this exciting research area.

Tailored negative/positive photoresponse of BP via doping

Black phosphorus (BP) is a promising material for photodetectors due to its excellent and broadband photoresponse. To realize a wide application of BP in photodetection, there is a continuous eagerness for new approaches to tailor photoresponse of BP for a specific purpose, such as high sensitivity and switching of negative/positive responses. Here, we demonstrate that the ion irradiation with controllable conditions can enhance the photoresponsivity of BP for two orders compared to the pristine one, and can select the positive/negative photoresponse of the BP. The range of the tailored photoresponse covers the whole optical spectrum, ranging from the visible (532 nm) to the mid-infrared (10 μm). This work shows a pathway to modulate the photoresponse of BP, which opens new possibilities for potential photonic applications.

Fully Light-Controlled Memory and Neuromorphic Computation in Layered Black Phosphorus

Imprinting vision as memory is a core attribute of human cognitive learning. Fundamental to artificial intelligence systems are bioinspired neuromorphic vision components for the visible and invisible segments of the electromagnetic spectrum. Realization of a single imaging unit with a combination of in-built memory and signal processing capability is imperative to deploy efficient brain-like vision systems. However, the lack of a platform that can be fully controlled by light without the need to apply alternating polarity electric signals has hampered this technological advance. Here, a neuromorphic imaging element based on a fully light-modulated 2D semiconductor in a simple reconfigurable phototransistor structure is presented. This standalone device exhibits inherent characteristics that enable neuromorphic image pre-processing and recognition. Fundamentally, the unique photoresponse induced by oxidation-related defects in 2D black phosphorus (BP) is exploited to achieve visual memory, wavelength-selective multibit programming, and erasing functions, which allow in-pixel image pre-processing. Furthermore, all-optically driven neuromorphic computation is demonstrated by machine learning to classify numbers and recognize images with an accuracy of over 90%. The devices provide a promising approach toward neurorobotics, human-machine interaction technologies, and scalable bionic systems with visual data storage/buffering and processing.

Positive and negative photoconductivity characteristics in CsPbBr3/graphene heterojunction

Broadband response photodetectors have received great research interest in optical sensing field. Usually, materials with positive photoconductivity (PPC) are general and the lack of negative photoconductivity (NPC) materials limits the application of photoelectric effect, especially in the broadband photodetecting field. Therefore, the finding of NPC materials is very important. Integrating PPC and NPC response into a single device is extremely meaningful to the development of broadband photodetector. In this work, we fabricated CsPbBr₃ nanocrystals (NCs)-multilayered graphene heterojunction, which achieved persistent NPC response to ultra violet (300-390 nm) and PPC response to visible light (420-510 nm). The persistent NPC relies on the desorption of H₂O vapor, and varies its intensity with the power intensity of laser. The PPC relies on the holes transmission from NCs to graphene. The recombination of NPC and PPC effect provides background knowledge for the development of broadband photodetector.

Self-Assembled Peptide Nanofibers with Voltage-Regulated Inverse Photoconductance

Inverse photoconductance is an uncommon phenomenon observed in selective low-dimensional materials, in which the electrical conductivity of the materials decreases under light illumination. The unique material property holds great promise for biomedical applications in photodetectors, photoelectric logic gates, and low-power nonvolatile memory, which remains a daunting challenge. Especially, tunable photoconductivity for biocompatible materials is highly desired for interfacing with biological systems but is less explored in organic materials. Here, we report nanofibers self-assembled with cyclo-tyrosine-tyrosine (cyclo-YY) having voltage-regulated inverse photoconductance and photoconductance. The peptide nanofibers can be switched back and forth by a bias voltage for imitating biological sensing in artificial vision and memory devices. A peptide optoelectronic resistive random access memory (PORRAM) device has also been fabricated using the nanofibers that can be electrically switched between long-term and short-term memory. The underlying mechanism of the reversible photoconductance is discussed in this paper. Due to the inherent biocompatibility of peptide materials, the reversible photoconductive nanofibers may have broad applications in sensing and storage for biotic and abiotic interfaces.

Reduction of the ambient effect in multilayer InSe transistors and a strategy toward stable 2D-based optoelectronic applications

Indium selenide (InSe) photodetection devices attract significant research interest. However, InSe is unstable and degrades rapidly in ambient conditions, thus it is still a challenge to fabricate stable optoelectronic devices. In this work, multilayer InSe FETs are fabricated, and their photoresponse properties are investigated. Both positive and negative photoconductivities are observed for the first time in the same InSe FET in a wide spectral range from 450 nm to 660 nm, which can be tuned through changing either the gate bias or the source-drain bias. A physical mechanism is proposed to explain the dual-photoresponse phenomenon in our devices. Based on the proposed physical mechanism, as a proof of concept, a facile and simple approach is used to eliminate the negative photoconductivity of the InSe FET. Our results will offer valuable strategies for stable multilayer InSe optoelectronic device design, and a practical scheme for improving the performance of other transition metal dichalcogenide devices as well.

Photoconductivity Switching in MoTe2/Graphene Heterostructure by Trap-Assisted Photogating

Negative photoconductivity (NPC), a reduction in photoconductivity under light illumination, could provide low power consumption and high-speed frequency response. The NPC has been generally observed in low-dimensional materials, which can be easily affected by the trapping of photocarriers. However, a gradual transition between NPC and positive photoconductivity (PPC) by controlling the light intensity has not been reported. In this study, a gradual and reversible switching between NPC and PPC is achieved in a van der Waals heterostructure of graphene and MoTe₂. The initially observed NPC state becomes a PPC state with the increase in light intensity. The switching between NPC and PPC is considered to originate from the hole trapping in MoTe₂. The hole trapping can induce a shift in the Fermi level of MoTe₂ and thus change the junction characteristics between the graphene and MoTe₂, which determine the photoresponse type (NPC or PPC). Notably, the switching from one state to the other can also be reversed, depending on the gate bias. The stable and reversible effect upon light illumination and application of a gate voltage could be used in optoelectronic devices and optical communications.

Photoinduced Persistent Electron Accumulation and Depletion in LaAlO_{3}/SrTiO_{3} Quantum Wells

Persistent photoconductance is a phenomenon found in many semiconductors, by which light induces long-lived excitations in electronic states. Commonly, persistent photoexcitation leads to an increase of carriers (accumulation), though occasionally it can be negative (depletion). Here, we present the quantum well at the LaAlO_{3}/SrTiO_{3} interface, where in addition to photoinduced accumulation, a secondary photoexcitation enables carrier depletion. The balance between both processes is wavelength dependent, and allows tunable accumulation or depletion in an asymmetric manner, depending on the relative arrival time of photons of different frequencies. We use Green's function formalism to describe this unconventional photoexcitation, which paves the way to an optical implementation of neurobiologically inspired spike-timing-dependent plasticity.

Optically Stimulated Artificial Synapse Based on Layered Black Phosphorus

The translation of biological synapses onto a hardware platform is an important step toward the realization of brain-inspired electronics. However, to mimic biological synapses, devices till-date continue to rely on the need for simultaneously altering the polarity of an applied electric field or the output of these devices is photonic instead of an electrical synapse. As the next big step toward practical realization of optogenetics inspired circuits that exhibit fidelity and flexibility of biological synapses, optically-stimulated synaptic devices without a need to apply polarity-altering electric field are needed. Utilizing a unique photoresponse in black phosphorus (BP), here reported is an all-optical pathway to emulate excitatory and inhibitory action potentials by exploiting oxidation-related defects. These optical synapses are capable of imitating key neural functions such as psychological learning and forgetting, spatiotemporally correlated dynamic logic and Hebbian spike-time dependent plasticity. These functionalities are also demonstrated on a flexible platform suitable for wearable electronics. Such low-power consuming devices are highly attractive for deployment in neuromorphic architectures. The manifestation of cognition and spatiotemporal processing solely through optical stimuli provides an incredibly simple and powerful platform to emulate sophisticated neural functionalities such as associative sensory data processing and decision making.

Superionic Modulation of Polymethylmethacrylate-Assisted Suspended Few-Layer Graphene Nanocomposites for High-Performance Photodetectors

Graphene is receiving significant attention for use in optoelectronic devices because it exhibits a wide range of desirable electrical properties. Although modified graphene that is fabricated on quantum dots (or similar integration strategies) has shown promise, it has not met the requirements for high-speed applications and highly sensitive detection. Herein, we report ion-modulated graphene composite nanostructures that were incorporated into photodetectors. We focus on the dynamical properties of the novel photodetectors, and they exhibit extraordinary photoelectric performances (photoresponsivity ∼1 A/W, response time ∼100 μs) over a broad range of wavelengths from 405 to 1064 nm (the maximum external quantum efficiency is greater than 300% at 635 nm with a 10 kHz chopping frequency). A theoretical model is proposed in this paper, and it is in good agreement with our experimental results. The dynamic analyses further confirmed the dissociation and recombination of ion-electron bound states to be responsible for the fast and sensitive photoresponse from the composite samples. Although ion-modulated optoelectronic nanomaterials are rarely studied, they require further exploration as they offer new insights and alternatives in nanomaterial research.

Interface Properties Probed by Active THz Surface Emission in Graphene/SiO2/Si Heterostructures

Graphene/semiconductor heterostructures demonstrate an improvement of traditional electronic and optoelectronic devices because of their outstanding charge transport properties inside and at the interfaces. However, very limited information has been accessed from the interfacial properties by traditional measurement. Herein, we present an active THz surface emission spectroscopy for the interface build-in potential and charge detrapping time constant evaluation from the interface of graphene on SiO₂/Si (Gr/SiO₂/Si). The active THz generation presents an intuitive insight into the depletion case, weak inversion case, and strong inversion case at the interface in the heterostructure. By analyzing the interface electric-field-induced optical rectification (EFIOR) in a strong inversion case, the intrinsic build-in potential is identified as -0.15 V at Gr/SiO₂/Si interface. The interface depletion layer presents 44% positive THz intrinsic modulation by the reverse gate voltage and 70% negative THz intrinsic modulation by the forward gate voltage. Moreover, a time-dependent THz generation measurement has been used to deduce the charge detrapping decay time constant. The investigation will not only highlight the THz surface emission spectroscopy for the graphene-based interface analysis but also demonstrate the potential for the efficient THz intrinsic modulation as well as the enhancement of THz emission by the heterostructures.

Negative Photoconductance in van der Waals Heterostructure-Based Floating Gate Phototransistor

van der Waals (vdW) heterostructures made of two-dimensional materials have been demonstrated to be versatile architectures for optoelectronic applications due to strong light--matter interactions. However, most light-controlled phenomena and applications in the vdW heterostructures rely on positive photoconductance (PPC). Negative photoconductance (NPC) has not yet been reported in vdW heterostructures. Here we report the observation of the NPC in the ReS₂/h-BN/MoS₂ vdW heterostructure-based floating gate phototransistor. The fabricated devices exhibit excellent performance of nonvolatile memory without light illumination. More interestingly, we observe a gate-tunable transition between the PPC and the NPC under the light illumination. The observed NPC phenomenon can be attributed to charge transfer between the floating gate and the conduction channel. Furthermore, we show that control of NPC through light intensity is promising in realization of light-tunable multibit memory devices. Our results may enable potential applications in multifunctional memories and optoelectronic devices.

Layer-by-layer hybrid chemical doping for high transmittance uniformity in graphene-polymer flexible transparent conductive nanocomposite

A traditional transparent conducting film (TCF) such as indium tin oxide (ITO) exhibits poor mechanical flexibility and inconsistent transmittance throughout the UV-VIS-NIR spectrum. Recent TCFs like graphene films exhibit high sheet resistance (R_s) due to defect induced carrier scattering. Here we show a unique hybrid chemical doping method that results in high transmittance uniformity in a layered graphene-polymer nanocomposite with suppressed defect-induced carrier scattering. This layer-by-layer hybrid chemical doping results in low R_s (15 Ω/sq at >90% transmittance) and 3.6% transmittance uniformity (300–1000 nm) compared with graphene (17%), polymer (8%) and ITO (46%) films. The weak localization effect in our nanocomposite was reduced to 0.5%, compared with pristine (4.25%) and doped graphene films (1.2%). Furthermore, negligible R_s change (1.2 times compared to 12.6 × 10³ times in ITO) and nearly unaltered transmittance spectra were observed up to 24 GPa of applied stress highlighting mechanical flexibility of the nanocomposite film.

Nonvolatile infrared memory in MoS2/PbS van der Waals heterostructures

Optoelectronic devices for information storage and processing are at the heart of optical communication technology due to their significant applications in optical recording and computing. The infrared radiations of 850, 1310, and 1550 nm with low energy dissipation in optical fibers are typical optical communication wavebands. However, optoelectronic devices that could convert and store the infrared data into electrical signals, thereby enabling optical data communications, have not yet been realized. We report an infrared memory device using MoS₂/PbS van der Waals heterostructures, in which the infrared pulse intrigues a persistent resistance state that hardly relaxes within our experimental time scales (more than 10⁴ s). The device fully retrieves the memory state even after powering off for 3 hours, indicating its potential for nonvolatile storage devices. Furthermore, the device presents a reconfigurable switch of 2000 stable cycles. Supported by a theoretical model with quantitative analysis, we propose that the optical memory and the electrical erasing phenomenon, respectively, originate from the localization of infrared-induced holes in PbS and gate voltage pulse-enhanced tunneling of electrons from MoS₂ to PbS. The demonstrated MoS₂ heterostructure-based memory devices open up an exciting field for optoelectronic infrared memory and programmable logic devices.

Graphene/PbS-Quantum Dots/Graphene Sandwich Structures Enabled by Laser Shock Imprinting for High Performance Photodetectors

Quantum dots (QDs) integrated 2-dimensional (2D) materials have great potential for photodetector applications due to the excellent light absorption of QDs and ultrafast carrier transportation of 2D materials. However, there is a main issue that prevents efficient carrier transportation and ideal performance of photodetectors: the high interfacial resistance between 2D materials and QDs due to the bad contacts between 2D/0D interface, which makes sluggish carrier transfer from QDs to 2D materials. Here, a sandwich structure (graphene/PbS-QDs/graphene) with seamless 2D/0D contact was fabricated by laser shock imprinting, which opto-mechanically tunes the morphology of 2D materials to perfectly wrap on 0D materials and efficiently collect carriers from the PbS-QDs. It is found that this seamless integrated 2D/0D/2D structure significantly enhanced the carrier transmission, photoresponse gain (by 2×), response time (by 20×), and photoresponse speed (by 13×). The response time (∼30 ms) and I_p/ I_d ratio (13.2) are both over 10× better than the reported hybrid graphene photodetectors. This is due to the tight contact and efficient gate-modulated carrier injection from PbS-QDs to graphene. The gate voltage dictates whether electrons or holes dominate the carrier injection from PbS-QDs to graphene.

Growth of low doped monolayer graphene on SiC(0001) via sublimation at low argon pressure

Silicon carbide (SiC) sublimation is the most promising option to achieve transfer-free graphene at the wafer-scale. We investigated the initial growth stages from the buffer layer to monolayer graphene on SiC(0001) as a function of annealing temperature at low argon pressure (10 mbar). A buffer layer, fully covering the SiC substrate, forms when the substrate is annealed at 1600 °C. Graphene formation starts from the step edges of the SiC substrate at higher temperature (1700 °C). The spatial homogeneity of the monolayer graphene was observed at 1750 °C, as characterized by Raman spectroscopy and magneto-transport. Raman spectroscopy mapping indicated an A_G-graphene/A_G-HOPG ratio of around 3.3%, which is very close to the experimental value reported for a graphene monolayer. Transport measurements from room temperature down to 1.7 K indicated slightly p-doped samples (p ≃ 10¹⁰ cm^-2) and confirmed both continuity and thickness of the monolayer graphene film. Successive growth processes have confirmed the reproducibility and homogeneity of these monolayer films.

A new micromechanical approach for the preparation of graphene nanoplatelets deposited on polyethylene

An advantageous micromechanical technique to deposit large area graphene nanoplatelet (GNP) thin films on a low-density polyethylene substrate is proposed. This method is based on the application of shear-stress and friction forces to a graphite platelets/ethanol paste on the surface of a polymeric substrate; it allows us to obtain a continuous film of superimposed nanoplatelets mainly made of 13-30 graphene layers. X-ray diffraction (XRD), atomic force and transmission electron microscopy (TEM) measurements support the occurrence of a partial exfoliation of the graphite platelets due to shear-stress and friction forces applied during film formation. Scanning electron microscopy (SEM) observations point out that the surface of the polymer is uniformly coated by the overlap of GNPs, and TEM analysis reveals the tendency of the nanoplatelets to align parallel to the interface plane. It has been found that the deposited samples, under white light illumination, exhibit a negative photoconductivity and a linear photoresponse as a function of the applied voltage and the optical power density in the -120 ÷ 120 mV and 20.9 ÷ 286.2 mW cm^-2 ranges, respectively.

Light Induced Electron-Phonon Scattering Mediated Resistive Switching in Nanostructured Nb Thin Film Superconductor

The elemental Nb is mainly investigated for its eminent superconducting properties. In contrary, we report of a relatively unexplored property, namely, its superior optoelectronic property in reduced dimension. We demonstrate here that nanostructured Nb thin films (NNFs), under optical illumination, behave as room temperature photo-switches and exhibit bolometric features below its superconducting critical temperature. Both photo-switch and superconducting bolometric behavior are monitored by its resistance change with light in visible and near infrared (NIR) wavelength range. Unlike the conventional photodetectors, the NNF devices switch to higher resistive states with light and the corresponding resistivity change is studied with thickness and grain size variations. At low temperature in its superconducting state, the light exposure shifts the superconducting transition towards lower temperature. The room temperature photon sensing nature of the NNF is explained by the photon assisted electron-phonon scattering mechanism while the low temperature light response is mainly related to the heat generation which essentially changes the effective temperature for the device and the device is capable of sensing a temperature difference of few tens of milli-kelvins. The observed photo-response on the transport properties of NNFs can be very important for future superconducting photon detectors, bolometers and phase slip based device applications.

Interface-induced terahertz persistent photoconductance in rGO-gelatin flexible films

Light-induced difference terahertz (THz) spectroscopy is used to investigate the dielectric characteristics of reduced graphene oxide-gelatin (rGO-Gel) flexible films. RGO-Gel films are observed to exhibit positive photoconductance under 800 nm laser illumination, resulting in the modulation depth of the THz transmission up to 33.5%. Moreover, persistent photoconductance (PPC), which is a prolonged light-induced conducting behavior, has been observed to last as long as tens of seconds in rGO-Gel films. The PPC phenomenon is due to the electrons trapped in the defects of rGO and in the interface between rGO and gelatin, and is enhanced by the strong interaction between rGO (a p-type semiconductor) and gelatin (electron donors). This work holds potential for creating optoelectronic devices based on rGO-Gel films, such as optical modulators, switches, photodetectors, photosensors, and persistent photonic memory devices in the THz region.

Boosting photoresponse in silicon metal-semiconductor-metal photodetector using semiconducting quantum dots

Silicon based metal-semiconductor-metal (MSM) photodetectors have faster photogeneration and carrier collection across the metal-semiconductor Schottky contacts, and CMOS integratibility compared to conventional p-n junction photodetectors. However, its operations are limited by low photogeneration, inefficient carrier-separation, and low mobility. Here, we show a simple and highly effective approach for boosting Si MSM photodetector efficiency by uniformly decorating semiconducting CdSe quantum dots on Si channel (Si-QD). Significantly higher photocurrent on/off ratio was achieved up to over 500 compared to conventional Si MSM photodetector (on/off ratio ~5) by increasing photogeneration and improving carrier separation. Furthermore, a substrate-biasing technique invoked wide range of tunable photocurrent on/off ratio in Si-QD photodetector (ranging from 2.7 to 562) by applying suitable combinations of source-drain and substrate biasing conditions. Strong photogeneration and carrier separation were achieved by employing Stark effect into the Si-QD hybrid system. These results highlight a promising method for enhancing Si MSM photodetector efficiency more than 100 times and simultaneously compatible with current silicon technologies.

Negative photoconductivity of InAs nanowires

Negative photoconductivity is observed in InAs nanowires (NWs) without a surface defective layer. The negative photoconductivity is strongly dependent on the wavelength and intensity of the light, and is also sensitive to the environmental atmosphere. Two kinds of mechanisms are discerned to work together. One is related to gas adsorption, which is photodesorption of water molecules and photo-assisted chemisorption of O2 molecules. The other one can be attributed to the photogating effect introduced by the native oxide layer outside the NWs.

Metal nanoparticles triggered persistent negative photoconductivity in silk protein hydrogels

Silk protein is a natural biopolymer with intriguing properties, which are attractive for next generation bio-integrated electronic and photonic devices. Here, we demonstrate the negative photoconductive response of Bombyx mori silk protein fibroin hydrogels, triggered by Au nanoparticles. The room temperature electrical conductivity of Au-silk hydrogels is found to be enhanced with the incorporation of Au nanoparticles over the control sample, due to the increased charge transporting networks within the hydrogel. Au-silk lateral photoconductor devices show a unique negative photoconductive response under an illumination of 325 nm, with excitation energy higher than the characteristic metal plasmon resonance band. The enhanced photoconductance yield in the hydrogels over the silk protein is attributed to the photo-oxidation of amino groups in the β-pleated sheets of the silk around the Au nanoparticles followed by the breaking of charge transport networks. The Au-silk nanocomposite does not show any photoresponse under visible illumination because of the localization of excited charges in Au nanoparticles. The negative photoconductive response of hybrid Au-silk under UV illumination may pave the way towards the utilization of silk for future bio-photonic devices using metal nanoparticle platforms.

Photoresponse of double-stacked graphene to Infrared radiation

We report the photoresponse of stacked graphene layers towards infrared radiation. Graphene is stacked in two configurations, namely, crossed and parallel layers. Raman analysis demonstrated a strong interaction among the stacked graphene layers. Graphene in the crossed configuration exhibited the presence of both negative and positive conductivities; however, other configurations of graphene exhibited positive conductivity only. The presence of negative photoconductivity is proposed to be due to oxygen or oxygen-related functional group absorbents that are trapped in between two monolayers of graphene and act as scattering centers for free carriers. An interesting trend is reported in differential conductivity when stacked layers are compared with multilayers and parallel-stacked graphene layers.

Quantum Carrier Reinvestment-induced ultrahigh and broadband photocurrent responses in graphene-silicon junctions

In an earlier work, we had reported a method that enables graphene-silicon junctions to display exceptionally high photovoltaic responses, exceeding 10(7) V/W. Using a completely different method that has recently been reported to result in ultrahigh gain, we now show that these junctions can also demonstrate giant photocurrent responsivities that can approach ∼ 10(7) A/W. Together, these mechanisms enable graphene-silicon junctions to be a dual-mode, broad-band, scalable, CMOS-compatible, and tunable photodetector that can operate either in photovoltage or photocurrent modes with ultrahigh responsivity values. We present detailed validation of the underlying mechanism (which we call Quantum Carrier Reinvestment, or QCR) in graphene-silicon junctions. In addition to ultrasensitive photodetection, we present QCR photocurrent spectroscopy as a tool for investigating spectral recombination dynamics at extremely low incident powers, a topic of significant importance for optoelectronic applications. We show that such spectroscopic studies can also provide a direct measure of photon energy values associated with various allowed optical transitions in silicon, again an extremely useful technique that can in principle be extended to characterize electronic levels in arbitrary semiconductors or nanomaterials. We further show the significant impact that underlying substrates can have on photocurrents, using QCR-photocurrent mapping. Contrary to expectations, QCR-photocurrents in graphene on insulating SiO2 substrates can be much higher than its intrinsic photocurrents, and even larger than QCR-photocurrents obtained in graphene overlaying semiconducting or metallic substrates. These results showcase the vital role of substrates in photocurrent measurements in graphene or potentially in other similar materials which have relatively high carrier mobility values.

Laser-induced direct graphene patterning and simultaneous transferring method for graphene sensor platform

General methods utilized in the fabrication of graphene devices involve graphene transferring and subsequent patterning of graphene via multiple wet-chemical processes. In the present study, a laser-induced pattern transfer (LIPT) method is proposed for the transferring and patterning of graphene in a single processing step. Via the direct graphene patterning and simultaneous transferring, the LIPT method greatly reduces the complexity of graphene fabrication while augmenting flexibility in graphene device design. Femtosecond laser ablation under ambient conditions is employed to transfer graphene/PMMA microscale patterns to arbitrary substrates, including a flexible film. Suspended cantilever structures are also demonstrated over a prefabricated trench structure via the single-step method. The feasibility of this method for the fabrication of functional graphene devices is confirmed by measuring the electrical response of a graphene/PMMA device under laser illumination.

Graphene-MoS2 hybrid structures for multifunctional photoresponsive memory devices

Combining the electronic properties of graphene and molybdenum disulphide (MoS2) in hybrid heterostructures offers the possibility to create devices with various functionalities. Electronic logic and memory devices have already been constructed from graphene-MoS2 hybrids, but they do not make use of the photosensitivity of MoS2, which arises from its optical-range bandgap. Here, we demonstrate that graphene-on-MoS2 binary heterostructures display remarkable dual optoelectronic functionality, including highly sensitive photodetection and gate-tunable persistent photoconductivity. The responsivity of the hybrids was found to be nearly 1 × 10(10) A W(-1) at 130 K and 5 × 10(8) A W(-1) at room temperature, making them the most sensitive graphene-based photodetectors. When subjected to time-dependent photoillumination, the hybrids could also function as a rewritable optoelectronic switch or memory, where the persistent state shows almost no relaxation or decay within experimental timescales, indicating near-perfect charge retention. These effects can be quantitatively explained by gate-tunable charge exchange between the graphene and MoS2 layers, and may lead to new graphene-based optoelectronic devices that are naturally scalable for large-area applications at room temperature.

Effects of plasmonic coupling and electrical current on persistent photoconductivity of single-layer graphene on pristine and silver-nanoparticle-coated SiO2/Si

Effects and mechanisms of conductivity variation of chemically vapor deposited single-layer graphene covering silver nanoparticles on SiO(2)/Si are reported based on blue-light (405 nm) induced plasmonic coupling and electrical current induced annealing and desorption of surface adsorbates. With 1V applied voltage, photoconductivity is positive except a brief negative period when the graphene is first illuminated by light. At 10 mV applied voltage, negative photoconductivity persists for hours. In comparison, negative photoconductivity of graphene on pristine SiO(2)/Si persists for tens of hours. When the applied voltage is increased to 1V, it takes tens of hours of light illumination to change to positive photoconductivity.