Super-resolution fingerprinting detects chemical reactions and idiosyncrasies of single DNA pegboards

Using Single-Molecule FRET to Evaluate DNA Nanodevices at Work

The observation of DNA nanodevices at a single molecule (i.e., device) level and in real time provides rich information that is typically masked in ensemble measurements. Single-molecule fluorescence resonance energy transfer (smFRET) offers a means to directly follow dynamic conformational or compositional changes that DNA nanodevices undergo while operating, thereby retrieving insights critical for refining them toward optimal function. To be successful, smFRET measurements require careful execution and meticulous data analysis for robust statistics. Here we outline the elemental steps for smFRET experiments on DNA nanodevices, starting from microscope slide preparation for single-molecule observation to data acquisition and analysis.

Optical and Topological Characterization of Hexagonal DNA Origami Nanotags

DNA origami can be applied as a "ruler" for nanoscale calibration or super-resolution fluorescence microscopy with an ideal structure for defining fluorophore arrangement, allowing the distance between fluorophores to be precisely controlled at the nanometer scale. DNA origami can also be used as a nanotag with arbitrary programmable shapes for topological identification. In this paper, we formed a hexagonal origami structure embedded with three different fluorescent dyes on the surface. The distance between each fluorescent block was ~120 nm, which is below the diffraction limit of light, allowing for its application as a nano-ruler for super-resolution fluorescence microscopy. The outside edge of the hexagonal structure was redesigned to form three different substructures as topological labels. Atomic and scanning force microscopy demonstrated consistency of the nanoscale distance between morphological and fluorescent labels. Therefore, this fluorophore-embedded hexagonal origami platform can be used as a dual nano-ruler for both optical and topological calibration.

Deep Red Blinking Fluorophore for Nanoscopic Imaging and Inhibition of β-Amyloid Peptide Fibrillation

Deposition and aggregation of β-amyloid (Aβ) peptides are demonstrated to be closely related to the pathogenesis of Alzheimer's disease (AD). Development of functional molecules capable of visualizing Aβ_1-40 aggregates with nanoscale resolution and even modulating Aβ assembly has attracted great attention recently. In this work, we use monocyanine fluorophore as the lead structure to develop a set of deep red carbazole-based cyanine molecules, which can specifically bind with Aβ_1-40 fibril via electrostatic and van der Waals interactions. Spectroscopic and microscopic characterizations demonstrate that one of these fluorophores, (E)-1-(2-(2-methoxyethoxy)ethyl)-4-(2-(9-methyl-9H-carbazol-3-yl)vinyl) quinolinium iodide (me-slg) can bind to Aβ_1-40 aggregates with strong fluorescence enhancement. The photophysical properties of me-slg at the single-molecule level, including low "on/off" duty cycle, high photon output, and sufficient switching cycles, enable real-time nanoscopic imaging of Aβ_1-40 aggregates. Morphology-dependent toxic effect of Aβ_1-40 aggregates toward PC12 cells is unveiled from in situ nanoscopic fluorescence imaging. In addition, me-slg displays a strong inhibitory effect on Aβ_1-40 fibrillation in a low inhibitor-protein ratio (e.g., I:P = 0.2). A noticeably reduced cytotoxic effect of Aβ_1-40 after the addition of me-slg is also confirmed. These results afford promising applications in the design of a nanoscopic imaging probe for amyloid fibril as well as the development of inhibitors to modulate the fibrillation process.

Probing the Mechanism of Structure-Switching Aptamer Assembly by Super-Resolution Localization of Individual DNA Molecules

Oligonucleotide aptamers can be converted into structure-switching biosensors by incorporating a short, typically labeled oligonucleotide that is complementary to the analyte-binding region. Binding of a target analyte can disrupt the hybridization equilibrium between the aptamer and the labeled-complementary oligo producing a concentration-dependent signal for target-analyte sensing. Despite its importance in the performance of a biosensor, the mechanism of analyte-response of most structure-switching aptamers is not well understood. In this work, we employ single-molecule fluorescence imaging to investigate the competitive kinetics of association of a labeled complementary oligonucleotide and a target analyte, l-tyrosinamide (L-Tym), interacting with an L-Tym-binding aptamer. The complementary readout strand is fluorescently labeled, allowing us to measure its hybridization kinetics with individual aptamers immobilized on a surface and located with super-resolution techniques; the small-molecule L-Tym analyte is not labeled in order to avoid having an attached dye molecule impact its interactions with the aptamer. We measure the association kinetics of unlabeled L-Tym by detecting its influence on the hybridization of the labeled complementary strand. We find that L-Tym slows the association rate of the complementary strand with the aptamer but does not impact its dissociation rate, suggesting an S_N1-like mechanism where the complementary strand must dissociate before L-Tym can bind. The competitive model revealed a slow association rate between L-Tym and the aptamer, producing a long-lived L-Tym-aptamer complex that blocks hybridization with the labeled complementary strand. These results provide insight about the kinetics and mechanism of analyte recognition in this structure-switching aptamer, and the methodology provides a general means of measuring the rates of unlabeled-analyte binding kinetics in aptamer-based biosensors.

DNA bipedal motor walking dynamics: an experimental and theoretical study of the dependency on step size

We present a detailed coarse-grained computer simulation and single molecule fluorescence study of the walking dynamics and mechanism of a DNA bipedal motor striding on a DNA origami. In particular, we study the dependency of the walking efficiency and stepping kinetics on step size. The simulations accurately capture and explain three different experimental observations. These include a description of the maximum possible step size, a decrease in the walking efficiency over short distances and a dependency of the efficiency on the walking direction with respect to the origami track. The former two observations were not expected and are non-trivial. Based on this study, we suggest three design modifications to improve future DNA walkers. Our study demonstrates the ability of the oxDNA model to resolve the dynamics of complex DNA machines, and its usefulness as an engineering tool for the design of DNA machines that operate in the three spatial dimensions.

Molecular and living cell dynamic assays with optical microscopy imaging techniques

Generally, the message elucidated by the conventional analytical methods overlooks the heterogeneity of single objects, where the behavior of individual molecules is shielded. With the advent of optical microscopy imaging techniques, it is possible to identify, visualize and track individual molecules or nanoparticles under a biological environment with high temporal and spatial resolution. In this work, we summarize the commonly adopted optical microscopy techniques for bio-analytical assays in living cells, including total internal reflection fluorescence microscopy (TIRFM), super-resolution optical microscopy (SRM), and dark-field optical microscopy (DFM). The basic principles of these methods and some recent interesting applications in molecular detection and single-particle tracking are introduced. Moreover, the development in high-dimensional optical microscopy to achieve three-dimensional (3-D) as well as sub-diffraction localization and tracking of biomolecules is also highlighted.

Programming Structured DNA Assemblies to Probe Biophysical Processes

Structural DNA nanotechnology is beginning to emerge as a widely accessible research tool to mechanistically study diverse biophysical processes. Enabled by scaffolded DNA origami in which a long single strand of DNA is weaved throughout an entire target nucleic acid assembly to ensure its proper folding, assemblies of nearly any geometric shape can now be programmed in a fully automatic manner to interface with biology on the 1-100-nm scale. Here, we review the major design and synthesis principles that have enabled the fabrication of a specific subclass of scaffolded DNA origami objects called wireframe assemblies. These objects offer unprecedented control over the nanoscale organization of biomolecules, including biomolecular copy numbers, presentation on convex or concave geometries, and internal versus external functionalization, in addition to stability in physiological buffer. To highlight the power and versatility of this synthetic structural biology approach to probing molecular and cellular biophysics, we feature its application to three leading areas of investigation: light harvesting and nanoscale energy transport, RNA structural biology, and immune receptor signaling, with an outlook toward unique mechanistic insight that may be gained in these areas in the coming decade.

Single-Molecule Kinetic Investigation of Cocaine-Dependent Split-Aptamer Assembly

Aptamers are short nucleic-acid biopolymers selected to have high affinity and specificity for protein or small-molecule target analytes. Aptamers can be engineered into split-aptamer biosensors comprising two nucleic acid strands that coassemble as they bind to a target, resulting in a large signal change from attached molecular probes (e.g., molecular beacons). The kinetics of split-aptamer assembly and their dependence on target recognition are largely unknown; knowledge of these kinetics could help in design and optimization of split-aptamer biosensors. In this work, we measure assembly kinetics of cocaine-dependent split-aptamer molecules using single-molecule fluorescence imaging. Assembly is monitored between a DNA strand tethered to a glass substrate and solutions containing the other strand tagged with a fluorescent label, with varying concentrations of the cocaine analyte. Dissociation rates are measured by tracking individual molecules and measuring their bound lifetimes. Dissociation-time distributions are biexponential, possibly indicating different folded states of the aptamer. The dissociation rate of only the longer-lived complex decreases with cocaine concentration, suggesting that cocaine stabilizes the long-lived aptamer complex. The variation in the slow dissociation rate with cocaine concentration is well described with an equilibrium-binding model, where the dissociation rate approaches a saturation limit consistent with the dissociation-equilibrium constant for cocaine-binding to the split aptamer. This single-molecule methodology provides a sensitive readout of cocaine-binding based on the dissociation kinetics of the split aptamer, allowing one to distinguish target-dependent aptamer assembly from background assembly. This methodology could be used to study other systems where target association affects the stability of aptamer duplexes.

DNA Origami Route for Nanophotonics

The specificity and simplicity of the Watson-Crick base pair interactions make DNA one of the most versatile construction materials for creating nanoscale structures and devices. Among several DNA-based approaches, the DNA origami technique excels in programmable self-assembly of complex, arbitrary shaped structures with dimensions of hundreds of nanometers. Importantly, DNA origami can be used as templates for assembly of functional nanoscale components into three-dimensional structures with high precision and controlled stoichiometry. This is often beyond the reach of other nanofabrication techniques. In this Perspective, we highlight the capability of the DNA origami technique for realization of novel nanophotonic systems. First, we introduce the basic principles of designing and fabrication of DNA origami structures. Subsequently, we review recent advances of the DNA origami applications in nanoplasmonics, single-molecule and super-resolution fluorescent imaging, as well as hybrid photonic systems. We conclude by outlining the future prospects of the DNA origami technique for advanced nanophotonic systems with tailored functionalities.

The Single-Molecule Centroid Localization Algorithm Improves the Accuracy of Fluorescence Binding Assays

Here, we demonstrate that the use of the single-molecule centroid localization algorithm can improve the accuracy of fluorescence binding assays. Two major artifacts in this type of assay, i.e., nonspecific binding events and optically overlapping receptors, can be detected and corrected during analysis. The effectiveness of our method was confirmed by measuring two weak biomolecular interactions, the interaction between the B1 domain of streptococcal protein G and immunoglobulin G and the interaction between double-stranded DNA and the Cas9-RNA complex with limited sequence matches. This analysis routine requires little modification to common experimental protocols, making it readily applicable to existing data and future experiments.

DNA-PAINT Super-Resolution Imaging for Nucleic Acid Nanostructures

Far-field super-resolution fluorescence microscopy has allowed observation of biomolecular and synthetic nanoscale systems with features on the nanometre scale, with chemical specificity and multiplexing capability. DNA-PAINT (DNA-based point accumulation for imaging in nanoscale topography) is a super-resolution method that exploits programmable transient hybridization between short oligonucleotide strands, and allows multiplexed, single-molecule, single-label visualization with down to ~5-10 nm resolution. DNA-PAINT provides a method for structural characterisation of nucleic acid nanostructures with high spatial resolution and single-strand visibility.

Sub-100-nm metafluorophores with digitally tunable optical properties self-assembled from DNA

Fluorescence microscopy allows specific target detection down to the level of single molecules and has become an enabling tool in biological research. To transduce the biological information to an imageable signal, we have developed a variety of fluorescent probes, such as organic dyes or fluorescent proteins with different colors. Despite their success, a limitation on constructing small fluorescent probes is the lack of a general framework to achieve precise and programmable control of critical optical properties, such as color and brightness. To address this challenge, we introduce metafluorophores, which are constructed as DNA nanostructure-based fluorescent probes with digitally tunable optical properties. Each metafluorophore is composed of multiple organic fluorophores, organized in a spatially controlled fashion in a compact sub-100-nm architecture using a DNA nanostructure scaffold. Using DNA origami with a size of 90 × 60 nm², substantially smaller than the optical diffraction limit, we constructed small fluorescent probes with digitally tunable brightness, color, and photostability and demonstrated a palette of 124 virtual colors. Using these probes as fluorescent barcodes, we implemented an assay for multiplexed quantification of nucleic acids. Additionally, we demonstrated the triggered in situ self-assembly of fluorescent DNA nanostructures with prescribed brightness upon initial hybridization to a nucleic acid target.

Optical imaging of individual biomolecules in densely packed clusters

Recent advances in fluorescence super-resolution microscopy have allowed subcellular features and synthetic nanostructures down to 10-20 nm in size to be imaged. However, the direct optical observation of individual molecular targets (∼5 nm) in a densely packed biomolecular cluster remains a challenge. Here, we show that such discrete molecular imaging is possible using DNA-PAINT (points accumulation for imaging in nanoscale topography)-a super-resolution fluorescence microscopy technique that exploits programmable transient oligonucleotide hybridization-on synthetic DNA nanostructures. We examined the effects of a high photon count, high blinking statistics and an appropriate blinking duty cycle on imaging quality, and developed a software-based drift correction method that achieves <1 nm residual drift (root mean squared) over hours. This allowed us to image a densely packed triangular lattice pattern with ∼5 nm point-to-point distance and to analyse the DNA origami structural offset with ångström-level precision (2 Å) from single-molecule studies. By combining the approach with multiplexed exchange-PAINT imaging, we further demonstrated an optical nanodisplay with 5 × 5 nm pixel size and three distinct colours with <1 nm cross-channel registration accuracy.

Competitive Assays of Label-Free DNA Hybridization with Single-Molecule Fluorescence Imaging Detection

Single-molecule imaging of fluorescently labeled biomolecules is a powerful technique for measuring association interactions; however, care must be taken to ensure that the fluorescent labels do not influence the system being probed. Label-free techniques are needed to understand biomolecule interactions free from the influence of an attached label, but these techniques often lack sensitivity and specificity. To solve these challenges, we have developed a competitive assay that uses single-molecule detection to track the population of unlabeled target single-stranded DNA (ssDNA) hybridized with probe DNA immobilized at a glass interface by detecting individual duplexes with a fluorescently labeled "tracer" ssDNA. By labeling a small fraction (<0.2%) of target molecules, the "tracer" DNA tracks the available probe DNA sites without significant competition with the unlabeled target population. Single-molecule fluorescence imaging is a good read-out scheme for competitive assays, as it is sufficiently sensitive to detect tracer DNA on substrates with relatively low densities of probe DNA, ∼10(-3) of a monolayer, so that steric interactions do not hinder DNA hybridization. Competitive assays are used to measure the association constant of complementary strand DNA hybridization of 9- and 10-base pair targets, where the tracer assay predicts the same association constant as a traditional displacement competitive assay. This methodology was used to compare the Ka of hybridization for identical DNA strands differing only by the presence of a fluorescent label tethered to the 5' end of the solution-phase target. The addition of the fluorescent label significantly stabilizes the DNA duplex by 3.6 kJmol(-1), adding more stability than an additional adenine-thymine base-pairing interaction, 2.7 kJmol(-1). This competitive tracer assay could be used to screen a number of labeled and unlabeled target DNA strands to measure the impact of fluorescent labeling on duplex stability. This single-molecule competitive hybridization scheme could be easily adapted into a sensitive assay, where competition between tracer and target oligonucleotides for probe sites could be used to measure concentrations of unlabeled DNA or RNA.

Rational design of DNA-actuated enzyme nanoreactors guided by single molecule analysis

The control of enzymatic reactions using nanoscale DNA devices offers a powerful application of DNA nanotechnology uniquely derived from actuation. However, previous characterization of enzymatic reaction rates using bulk biochemical assays reported suboptimal function of DNA devices such as tweezers. To gain mechanistic insight into this deficiency and to identify design rules to improve their function, here we exploit the synergy of single molecule imaging and computational modeling to characterize the three-dimensional structures and catalytic functions of DNA tweezer-actuated nanoreactors. Our analysis revealed two important deficiencies--incomplete closure upon actuation and conformational heterogeneity. Upon rational redesign of the Holliday junctions located at their hinge and arms, we found that the DNA tweezers could be more completely and uniformly closed. A novel single molecule enzyme assay was developed to demonstrate that our design improvements yield significant, independent enhancements in the fraction of active enzyme nanoreactors and their individual substrate turnover frequencies. The sequence-level design strategies explored here may aid more broadly in improving the performance of DNA-based nanodevices including biological and chemical sensors.

Superresolution microscopy with transient binding

For single-molecule localization based superresolution, the concentration of fluorescent labels has to be thinned out. This is commonly achieved by photophysically or photochemically deactivating subsets of molecules. Alternatively, apparent switching of molecules can be achieved by transient binding of fluorescent labels. Here, a diffusing dye yields bright fluorescent spots when binding to the structure of interest. As the binding interaction is weak, the labeling is reversible and the dye ligand construct diffuses back into solution. This approach of achieving superresolution by transient binding (STB) is reviewed in this manuscript. Different realizations of STB are discussed and compared to other localization-based superresolution modalities. We propose the development of labeling strategies that will make STB a highly versatile tool for superresolution microscopy at highest resolution.

Single-Molecule Fluorescence Imaging of Interfacial DNA Hybridization Kinetics at Selective Capture Surfaces

Accurate knowledge of the kinetics of complementary oligonucleotide hybridization is integral to the design and understanding of DNA-based biosensors. In this work, single-molecule fluorescence imaging is applied to measuring rates of hybridization between fluorescently labeled target ssDNA and unlabeled probe ssDNA immobilized on glass surfaces. In the absence of probe site labeling, the capture surface must be highly selective to avoid the influence of nonspecific adsorption on the interpretation of single-molecule imaging results. This is accomplished by increasing the probe molecule site densities by a factor of ∼100 compared to optically resolvable sites so that nonspecific interactions compete with a much greater number of capture sites and by immobilizing sulfonate groups to passivate the surface between probe strands. The resulting substrates exhibit very low nonspecific adsorption, and the selectivity for binding a complementary target sequence exceeds that of a scrambled sequence by nearly 3 orders of magnitude. The population of immobilized DNA probe sites is quantified by counting individual DNA duplexes at low target concentrations, and those results are used to calibrate fluorescence intensities on the same sample at much higher target concentrations to measure a full binding isotherm. Dissociation rates are determined from interfacial residence times of individual DNA duplexes. Equilibrium and rate constants of hybridization, K(a) = 38 (±1) μM(-1), k(on) = 1.64 (±0.06) × 10(6) M(-1) s(-1), and k(off) = 4.3 (±0.1) × 10(-2) s(-1), were found not to change with surface density of immobilized probe DNA, indicating that hybridization events at neighboring probe sites are independent. To test the influence of probe-strand immobilization on hybridization, the kinetics of the probe target reaction at the surface were compared with the same reaction in free solution, and the equilibrium constants and dissociation and association rates were found to be nearly equivalent. The selectivity of these capture surfaces should facilitate sensitive investigations of DNA hybridization at the limit of counting molecules. Because the immobilized probe DNA on these surfaces is unlabeled, photobleaching of a probe label is not an issue, allowing capture substrates to be used for long periods of time or even reused in multiple experiments.

Electron Microscopic Visualization of Protein Assemblies on Flattened DNA Origami

DNA provides an ideal substrate for the engineering of versatile nanostructures due to its reliable Watson-Crick base pairing and well-characterized conformation. One of the most promising applications of DNA nanostructures arises from the site-directed spatial arrangement with nanometer precision of guest components such as proteins, metal nanoparticles, and small molecules. Two-dimensional DNA origami architectures, in particular, offer a simple design, high yield of assembly, and large surface area for use as a nanoplatform. However, such single-layer DNA origami were recently found to be structurally polymorphous due to their high flexibility, leading to the development of conformationally restrained multilayered origami that lack some of the advantages of the single-layer designs. Here we monitored single-layer DNA origami by transmission electron microscopy (EM) and discovered that their conformational heterogeneity is dramatically reduced in the presence of a low concentration of dimethyl sulfoxide, allowing for an efficient flattening onto the carbon support of an EM grid. We further demonstrated that streptavidin and a biotinylated target protein (cocaine esterase, CocE) can be captured at predesignated sites on these flattened origami while maintaining their functional integrity. Our demonstration that protein assemblies can be constructed with high spatial precision (within ∼2 nm of their predicted position on the platforms) by using strategically flattened single-layer origami paves the way for exploiting well-defined guest molecule assemblies for biochemistry and nanotechnology applications.

Single-molecule tools for enzymology, structural biology, systems biology and nanotechnology: an update

Toxicology is the highly interdisciplinary field studying the adverse effects of chemicals on living organisms. It requires sensitive tools to detect such effects. After their initial implementation during the 1990s, single-molecule fluorescence detection tools were quickly recognized for their potential to contribute greatly to many different areas of scientific inquiry. In the intervening time, technical advances in the field have generated ever-improving spatial and temporal resolution and have enabled the application of single-molecule fluorescence to increasingly complex systems, such as live cells. In this review, we give an overview of the optical components necessary to implement the most common versions of single-molecule fluorescence detection. We then discuss current applications to enzymology and structural studies, systems biology, and nanotechnology, presenting the technical considerations that are unique to each area of study, along with noteworthy recent results. We also highlight future directions that have the potential to revolutionize these areas of study by further exploiting the capabilities of single-molecule fluorescence microscopy.

A DNA origami nanorobot controlled by nucleic acid hybridization

A prototype for a DNA origami nanorobot is designed, produced, and tested. The cylindrical nanorobot (diameter of 14 nm and length of 48 nm) with a switchable flap, is able to respond to an external stimulus and reacts by a physical switch from a disarmed to an armed configuration able to deliver a cellular compatible message. In the tested design the robot weapon is a nucleic acid fully contained in the inner of the tube and linked to a single point of the internal face of the flap. Upon actuation the nanorobot moves the flap extracting the nucleic acid that assembles into a hemin/G-quadruplex horseradish peroxidase mimicking DNAzyme catalyzing a colorimetric reaction or chemiluminescence generation. The actuation switch is triggered by an external nucleic acid (target) that interacts with a complementary nucleic acid that is beard externally by the nanorobot (probe). Hybridization of probe and target produces a localized structural change that results in flap opening. The flap movement is studied on a two-dimensional prototype origami using Förster resonance energy transfer and is shown to be triggered by a variety of targets, including natural RNAs. The nanorobot has potential for in vivo biosensing and intelligent delivery of biological activators.

Developing DNA nanotechnology using single-molecule fluorescence

CONSPECTUS: An important effort in the DNA nanotechnology field is focused on the rational design and manufacture of molecular structures and dynamic devices made of DNA. As is the case for other technologies that deal with manipulation of matter, rational development requires high quality and informative feedback on the building blocks and final products. For DNA nanotechnology such feedback is typically provided by gel electrophoresis, atomic force microscopy (AFM), and transmission electron microscopy (TEM). These analytical tools provide excellent structural information; however, usually they do not provide high-resolution dynamic information. For the development of DNA-made dynamic devices such as machines, motors, robots, and computers this constitutes a major problem. Bulk-fluorescence techniques are capable of providing dynamic information, but because only ensemble averaged information is obtained, the technique may not adequately describe the dynamics in the context of complex DNA devices. The single-molecule fluorescence (SMF) technique offers a unique combination of capabilities that make it an excellent tool for guiding the development of DNA-made devices. The technique has been increasingly used in DNA nanotechnology, especially for the analysis of structure, dynamics, integrity, and operation of DNA-made devices; however, its capabilities are not yet sufficiently familiar to the community. The purpose of this Account is to demonstrate how different SMF tools can be utilized for the development of DNA devices and for structural dynamic investigation of biomolecules in general and DNA molecules in particular. Single-molecule diffusion-based Förster resonance energy transfer and alternating laser excitation (sm-FRET/ALEX) and immobilization-based total internal reflection fluorescence (TIRF) techniques are briefly described and demonstrated. To illustrate the many applications of SMF to DNA nanotechnology, examples of SMF studies of DNA hairpins and Holliday junctions and of the interactions of DNA strands with DNA origami and origami-related devices such as a DNA bipedal motor are provided. These examples demonstrate how SMF can be utilized for measurement of distances and conformational distributions and equilibrium and nonequilibrium kinetics, to monitor structural integrity and operation of DNA devices, and for isolation and investigation of minor subpopulations including malfunctioning and nonreactive devices. Utilization of a flow-cell to achieve measurements of dynamics with increased time resolution and for convenient and efficient operation of DNA devices is discussed briefly. We conclude by summarizing the various benefits provided by SMF for the development of DNA nanotechnology and suggest that the method can significantly assist in the design and manufacture and evaluation of operation of DNA devices.

Fluorescence microscopy with 6 nm resolution on DNA origami

Resolution of emerging superresolution microscopy is commonly characterized by the width of a point-spread-function or by the localization accuracy of single molecules. In contrast, resolution is defined as the ability to separate two objects. Recently, DNA origamis have been proven as valuable scaffold for self-assembled nanorulers in superresolution microscopy. Here, we use DNA origami nanorulers to overcome the discrepancy of localizing single objects and separating two objects by resolving two docking sites at distances of 18, 12, and 6 nm by using the superresolution technique DNA PAINT(point accumulation for imaging in nanoscale topography). For the smallest distances, we reveal the influence of localization noise on the yield of resolvable structures that we rationalize by Monte Carlo simulations.

Multiplexed 3D cellular super-resolution imaging with DNA-PAINT and Exchange-PAINT

Super-resolution fluorescence microscopy is a powerful tool for biological research, but obtaining multiplexed images for a large number of distinct target species remains challenging. Here we use the transient binding of short fluorescently labeled oligonucleotides (DNA-PAINT, a variation of point accumulation for imaging in nanoscale topography) for simple and easy-to-implement multiplexed super-resolution imaging that achieves sub-10-nm spatial resolution in vitro on synthetic DNA structures. We also report a multiplexing approach (Exchange-PAINT) that allows sequential imaging of multiple targets using only a single dye and a single laser source. We experimentally demonstrate ten-color super-resolution imaging in vitro on synthetic DNA structures as well as four-color two-dimensional (2D) imaging and three-color 3D imaging of proteins in fixed cells.

Multifactorial modulation of binding and dissociation kinetics on two-dimensional DNA nanostructures

We use single-particle fluorescence resonance energy transfer (FRET) to show that organizing oligonucleotide probes into patterned two-dimensional arrays on DNA origami nanopegboards significantly alters the kinetics and thermodynamics of their hybridization with complementary targets in solution. By systematically varying the spacing of probes, we demonstrate that the rate of dissociation of a target is reduced by an order of magnitude in the densest probe arrays. The rate of target binding is reduced less dramatically, but to a greater extent than reported previously for one-dimensional probe arrays. By additionally varying target sequence and buffer composition, we provide evidence for two distinct mechanisms for the markedly slowed dissociation: direct hopping of targets between adjacent sequence-matched probes and nonsequence-specific, salt-bridged, and thus attractive electrostatic interactions with the DNA origami pegboard. This kinetic behavior varies little between individual copies of a given array design and will have significant impact on hybridization measurements and overall performance of DNA nanodevices as well as microarrays.