Raman enhancement effect on two-dimensional layered materials: graphene, h-BN and MoS2

Ultrasensitive detection of contaminants in milk using a novel NMS-Ag modified water-resistant paper substrate

Rapid and precise detection of harmful substances in food products is essential for ensuring public health and safety. This study introduces a novel surface-enhanced Raman spectroscopy (SERS) substrate, composed of a molybdenum disulfide‑silver nanocomposite, applied to flexible, water-resistant filter paper for detecting melamine and bisphenol A (BPA) in milk. Optimized molybdenum disulfide (NMS) nanoflowers (NFs) were synthesized through hydrothermal methods and high-temperature annealing, then modified with silver (Ag) nanoparticles to form the NMS-Ag nanocomposite (NMSA6). This substrate greatly enhances the Raman signal, achieving an enhancement factor of approximately 1.49 × 107 and a detection limit as low as 10-11 M for simultaneous multi-component analysis. Finite-difference time-domain (FDTD) simulations confirm the enhancement mechanism. The NMSA6 substrate demonstrates remarkably low detection limits for BPA and melamine, facilitating the analysis of various hazardous substances. These findings highlight the substrate's potential for highly sensitive, label-free detection, presenting a viable tool for food safety monitoring.

Phase-Engineered Transition Metal Dichalcogenides for Highly Efficient Surface-Enhanced Raman Scattering

Phase engineering of two-dimensional (2D) transition metal dichalcogenides (TMDs) is an attractive avenue to construct new surface-enhanced Raman scattering (SERS) substrates. Herein, 2D WS2 and MoS2 monolayers with high-purity distorted octahedral phase (1T') are prepared for highly sensitive SERS detection of analytes (e.g., rhodamine 6G, rhodamine B and crystal violet). 1T'-WS2 and 1T'-MoS2 monolayers show the detection limits of 8.28 × 10-12 and 8.57 × 10-11 M for rhodamine 6G, with the enhancement factors of 4.6 × 108 and 3.9 × 107, respectively, which are comparable to noble-metal substrates, outperforming semiconducting 2H-W(Mo)S2 monolayers and most of the reported non-noble-metal substrates. First-principles density functional theory calculations show that their Raman enhancement effect is mainly ascribed to highly efficient interfacial charge transfer between the 1T'-W(Mo)S2 monolayers and analytes. Our study reveals that 2D TMDs with semimetallic 1T' phase are promising as next-generation SERS substrates.

Robust Growth of 2D Transition Metal Dichalcogenide Vertical Heterostructures via Ammonium-Assisted CVD Strategy

Two dimension (2D) transition metal dichalcogenides (TMD) heterostructures have opened unparalleled prospects for next-generation electronic and optoelectronic applications due to their atomic-scale thickness and distinct physical properties. The chemical vapor deposition (CVD) method is the most feasible approach to prepare 2D TMD heterostructures. However, the synthesis of 2D vertical heterostructures faces competition between in-plane and out-of-plane growth, which makes it difficult to precisely control the growth of vertical heterostructures. Here, a universal and controllable strategy is reported to grow various 2D TMD vertical heterostructures through an ammonium-assisted CVD process. The ammonium-assisted strategy shows excellent controllability and operational simplicity to prevent interlayer diffusion/alloying and thermal decomposition of the existed TMD templates. Ab initio simulations demonstrate that the reaction between NH4Cl and MoS2 leads to the formation of MoS3 clusters, promoting the nucleation and growth of 2D MoS2 on existed 2D WS2 layer, thereby leading to the growth of vertical heterostructure. The resulting 2D WSe2/WS2 vertical heterostructure photodetectors demonstrate an outstanding optoelectronic performance, which are comparable to the performances of photodetectors fabricated from mechanically exfoliated and stacked vertical heterostructures. The ammonium-assisted strategy for robust growth of high-quality vertical van der Waals heterostructures will facilitate fundamental physics investigations and device applications in electronics and optoelectronics.

2D Material-Based Surface-Enhanced Raman Spectroscopy Platforms (Either Alone or in Nanocomposite Form)-From a Chemical Enhancement Perspective

Surface-enhanced Raman spectroscopy (SERS) is a vibrational spectroscopic technique with molecular fingerprinting capability and high sensitivity, even down to the single-molecule level. As it is 50 years since the observation of the phenomenon, it has now become an important task to discuss the challenges in this field and determine the areas of development. Electromagnetic enhancement has a mature theoretical explanation, while a chemical mechanism which involves more complex interactions has been difficult to elucidate until recently. This article focuses on the 2D material-based platforms where chemical enhancement (CE) is a significant contributor to SERS. In the context of a diverse range (transition metal dichalcogenides, MXenes, etc.) and categories (insulating, semiconducting, semimetallic, and metallic) of 2D materials, the review aims to realize the influence of various factors on SERS response such as substrates (layer thickness, structural phase, etc.), analytes (energy levels, molecular orientation, etc.), excitation wavelengths, molecular resonances, charge-transfer transitions, dipole interactions, etc. Some examples of special treatments or approaches have been outlined for overcoming well-known limitations of SERS and include how CE benefits from the defect-induced physicochemical changes to 2D materials mostly via the charge-transport ability or surface interaction efficiency. The review may help readers understand different phenomena involved in CE and broaden the substrate-designing approaches based on a diverse set of 2D materials.

Epitaxial Growth of Monolayer WS2 Single Crystals on Au(111) Toward Direct Surface-Enhanced Raman Spectroscopy Detection

The epitaxial growth of wafer-scale two-dimensional (2D) semiconducting transition metal dichalcogenides (STMDCs) single crystals is the key premise for their applications in next-generation electronics. Despite significant advancements, some fundamental factors affecting the epitaxy growth have not been fully uncovered, e.g., interface coupling strength, adlayer-substrate lattice matching, substrate step-edge-guiding effects, etc. Herein, we develop a model system to tackle these issues concurrently, and realize the epitaxial growth of wafer-scale monolayer tungsten disulfide (WS2) single crystals on the Au(111) substrate. This epitaxial system is featured with good adlayer-substrate lattice matching, obvious step-edge-guiding effect for the unidirectionally aligned nucleation/growth, and relatively weaker interfacial interaction than that of monolayer MoS2/Au(111), as evidenced by the evolution of a uniform Moiré pattern and an intrinsic band gap, according to on-site scanning tunneling microscopy/spectroscopy (STM/STS) characterizations and density functional theory calculations. Intriguingly, the unidirectionally aligned monolayer WS2 domains along the Au(111) steps can behave as ultrasensitive templates for surface-enhanced Raman scattering detection of organic molecules, due to the obvious charge transfer occurred at substrate step edges. This work should hereby deepen our understanding of the epitaxy mechanism of 2D STMDCs on single-crystal substrates, and propel their wafer-scale production and applications in various cutting-edge fields.

Enhanced Raman Scattering in CVD-Grown MoS2/Ag Nanoparticle Hybrids

Surface-Enhanced Raman Spectroscopy (SERS) is a powerful, non-destructive technique for enhancing molecular spectra, first discovered in 1974. This study investigates the enhancement of Raman signals from single- and few-layer molybdenum disulfide (MoS2) when interacting with silver nanoparticles. We synthesized a MoS2 membrane primarily consisting of monolayers and bilayers through a wet chemical vapor deposition method using metal salts. The silver nanoparticles were either directly grown on the MoS2 membrane or placed beneath it. Raman measurements revealed a significant increase in signal intensity from the MoS2 membrane on the silver nanoparticles, attributed to localized surface plasmon resonances that facilitate SERS. Our results indicate that dichalcogenide/plasmonic systems have promising applications in the semiconductor industry.

Observation of reversible and irreversible charge transfer processes in dye-monolayer graphene systems using Raman spectroscopy as a tool

Herein, we report the Raman spectroscopy of crystal violet (CV) and IR-780 Iodide molecules dispersed on the monolayer graphene film (MGF). In the CV-MGF system, the enhancement in the Raman scattering of CV molecules is observed irrespective of the location probed during the spectral measurements. This enhancement is due to the charge transfer from the MGF to CV molecules. However, in the case of the IR-780 Iodide - MGF system, the enhancement of Raman scattering of dye molecules or MGF is observed strongly depending upon the probed location. These observations indicate that the charge transfer is irreversible and reversible in the CV-MGF and IR-780 Iodide-MGF systems, respectively. Importantly, for the first time, this experimental study revealed that enhancing the Raman scattering of MGF is possible through the "chemical mechanism" with suitable dye molecules apart from the "electromagnetic mechanism" with plasmonic hot spots of the metal nanoparticles and photonic nanojets of single dielectric microparticles.

Toward Modeling the Complexity of the Chemical Mechanism in SERS

Surface-enhanced Raman scattering (SERS) provides detailed information about the binding of molecules at interfaces and their interactions with the local environment due to the large enhancement of Raman scattering. This enhancement arises from a combination of the electromagnetic mechanism (EM) and chemical mechanism (CM). While it is commonly accepted that EM gives rise to most of the enhancement, large spectral changes originate from CM. To elucidate the rich information contained in SERS spectra about molecules at interfaces, a comprehensive understanding of the enhancement mechanisms is necessary. In this Perspective, we discuss the current understanding of the enhancement mechanisms and highlight their interplay in complex local environments. We will also discuss emerging areas where the development of computational and theoretical models is needed with specific attention given to how the CM contributes to the spectral changes. Future efforts in modeling should focus on overcoming the challenges presented in this review in order to capture the complexity of CM in SERS.

Recent progress in Surface-Enhanced Raman Spectroscopy detection of biomarkers in liquid biopsy for breast cancer

Breast cancer is the most commonly diagnosed cancer in women globally and a leading cause of cancer-related mortality. However, current detection methods, such as X-rays, ultrasound, CT scans, MRI, and mammography, have their limitations. Recently, with the advancements in precision medicine and technologies like artificial intelligence, liquid biopsy, specifically utilizing Surface-Enhanced Raman Spectroscopy (SERS), has emerged as a promising approach to detect breast cancer. Liquid biopsy, as a minimally invasive technique, can provide a temporal reflection of breast cancer occurrence and progression, along with a spatial representation of overall tumor information. SERS has been extensively employed for biomarker detection, owing to its numerous advantages such as high sensitivity, minimal sample requirements, strong multi-detection ability, and controllable background interference. This paper presents a comprehensive review of the latest research on the application of SERS in the detection of breast cancer biomarkers, including exosomes, circulating tumor cells (CTCs), miRNA, proteins and others. The aim of this review is to provide valuable insights into the potential of SERS technology for early breast cancer diagnosis.

Beyond the Charge Transfer Mechanism for 2D Materials-Assisted Surface Enhanced Raman Scattering

Two-dimensional (2D) materials have been extensively implemented as surface-enhanced Raman scattering (SERS) substrates, enabling trace-molecule detection for broad applications. However, the accurate understanding of the mechanism remains elusive because most theoretical explanations are still phenomenological or qualitative based on simplified models and rough assumptions. To advance the development of 2D material-assisted SERS, it is vital to attain a comprehensive understanding of the enhancement mechanism and a quantitative assessment of the enhancement performance. Here, the microscopic chemical mechanism of 2D material-assisted SERS is quantitatively investigated. The frequency-dependent Raman scattering cross sections suggest that the 2D materials' SERS performance is strongly dependent on the excitation wavelengths and the molecule types. By analysis of the microscopic Raman scattering processes, the comprehensive contributions of SERS can be revealed. Beyond the widely postulated charge transfer mechanisms, the quantitative results conclusively demonstrate that the resonant transitions within 2D materials alone are also capable of enhancing the molecular Raman scattering through the diffusive scattering of phonons. Furthermore, all of these scattering routines will interfere with each other and determine the final SERS performance. Our results not only provide a complete picture of the SERS mechanisms but also demonstrate a systematic and quantitative approach to theoretically understand, predict, and promote the 2D materials SERS toward analytical applications.

Surface-Enhanced Raman Scattering Using 2D Materials

The use of surface-enhanced Raman scattering (SERS) as a technique for detecting small amounts of (bio)chemical analytes has become increasingly popular in various fields. While gold and silver nanostructures have been extensively studied as SERS substrates, the availability of other types of substrates is currently expanding the applications of this spectroscopic method. Recently, researchers have begun exploring two-dimensional (2D) materials (e. g., graphene-like nanostructures) as substrates for SERS analysis. These materials offer unique optical properties, a well-defined structure, and the ability to modify their surface chemistry. As a contribution to advance this field, this concept article highlights the significance of understanding the chemical mechanism that underlies the experimental Raman spectra of chemisorbed molecules onto 2D materials' surfaces. Therefore, the article discusses recent advancements in fabricating substrates using 2D layered materials and the synergic effects of using their metallic composites for SERS applications. Additionally, it provides a new perspective on using Raman imaging in developing 2D materials as analytical platforms for Raman spectroscopy, an exciting emerging research area with significant potential.

Hybrid plasmonic aerogel with tunable hierarchical pores for size-selective multiplexed detection of VOCs with ultrahigh sensitivity

Sensitive and rapid identification of volatile organic compounds (VOCs) at ppm level with complex composition is vital in various fields ranging from respiratory diagnosis to environmental safety. Herein, we demonstrate a SERS gas sensor with size-selective and multiplexed identification capabilities for VOCs by executing the pre-enrichment strategy. In particular, the macro-mesoporous structure of graphene aerogel and micropores of metal-organic frameworks (MOFs) significantly improved the enrichment capacity (1.68 mmol/g for toluene) of various VOCs near the plasmonic hotspots. On the other hand, molecular MOFs-based filters with different pore sizes could be realized by adjusting the ligands to exclude undesired interfering molecules in various detection environments. Combining these merits, graphene/AuNPs@ZIF-8 aerogel gas sensor exhibited outstanding label-free sensitivity (up to 0.1 ppm toluene) and high stability (RSD=14.8%, after 45 days storage at room temperature for 10 cycles) and allowed simultaneous identification of multiple VOCs in a single SERS measurement with high accuracy (error < 7.2%). We visualize that this work will tackle the dilemma between sensitivity and detection efficiency of gas sensors and will inspire the design of next-generation SERS technology for selective and multiplexed detection of VOCs.

Exploring and Engineering 2D Transition Metal Dichalcogenides toward Ultimate SERS Performance

Surface-enhanced Raman spectroscopy (SERS) is an ultrasensitive surface analysis technique that is widely used in chemical sensing, bioanalysis, and environmental monitoring. The design of the SERS substrates is crucial for obtaining high-quality SERS signals. Recently, 2D transition metal dichalcogenides (2D TMDs) have emerged as high-performance SERS substrates due to their superior stability, ease of fabrication, biocompatibility, controllable doping, and tunable bandgaps and excitons. In this review, a systematic overview of the latest advancements in 2D TMDs SERS substrates is provided. This review comprehensively summarizes the candidate 2D TMDs SERS materials, elucidates their working principles for SERS, explores the strategies to optimize their SERS performance, and highlights their practical applications. Particularly delved into are the material engineering strategies, including defect engineering, alloy engineering, thickness engineering, and heterojunction engineering. Additionally, the challenges and future prospects associated with the development of 2D TMDs SERS substrates are discussed, outlining potential directions that may lead to significant breakthroughs in practical applications.

Design superhydrophobic no-noble metal substrates for highly sensitive and signal stable SERS sensing

Surface-enhanced Raman spectroscopy (SERS) is an analytical technique with a broad range of potential applications in fields such as biomedicine, electrochemistry, and hazardous chemicals. However, it is challenging to develop SERS substrates that are both good sensitive and signal stable. Here we designed a superhydrophobic Nd doped MoS2 uniformly assembled on the activated carbon fiber cloth (CFC) to avoid the coffee ring effect and enrich the analyte, improving the enhancement factor (EF) to 3.9 × 109 and pesticide endosulfan (<10-10) analyte detection. We demonstrate our strategy by density-functional theory (DFT) calculations confirming that both adsorption energy and density of states are enhanced after doping Nd leading to SERS enhancement. Beside DFT calculations, our experiments also provide an effective means to demonstrate that the high SERS sensitivity is based on multiple charge transfer processes combined with the activated carbon cloth. Our results address the limitations of low sensitivity and limit of detection (LOD) of semiconductor SERS substrates for trace analysis and are a step towards practical applications.

Tuning the Fermi Level of Graphene by Two-Dimensional Metals for Raman Detection of Molecules

Graphene-enhanced Raman scattering (GERS) offers great opportunities to achieve optical sensing with a high uniformity and superior molecular selectivity. The GERS mechanism relies on charge transfer between molecules and graphene, which is difficult to manipulate by varying the band alignment between graphene and the molecules. In this work, we synthesized a few atomic layers of metal termed two-dimensional (2D) metal to precisely and deterministically modify the graphene Fermi level. Using copper phthalocyanine (CuPc) as a representative molecule, we demonstrated that tuning the Fermi level can significantly improve the signal enhancement and molecular selectivity of GERS. Specifically, aligning the Fermi level of graphene closer to the highest occupied molecular orbital (HOMO) of CuPc results in a more pronounced Raman enhancement. Density functional theory (DFT) calculations of the charge density distribution reproduce the enhanced charge transfer between CuPc molecules and graphene with a modulated Fermi level. Extending our investigation to other molecules such as rhodamine 6G, rhodamine B, crystal violet, and F16CuPc, we showed that 2D metals enabled Fermi level tuning, thus improving GERS detection for molecules and contributing to an enhanced molecular selectivity. This underscores the potential of utilizing 2D metals for the precise control and optimization of GERS applications, which will benefit the development of highly sensitive, specific, and reliable sensors.

Unusual Raman Enhancement Effect of Ultrathin Copper Sulfide

In surface-enhanced Raman spectroscopy (SERS), 2D materials are explored as substrates owing to their chemical stability and reproducibility. However, they exhibit lower enhancement factors (EFs) compared to noble metal-based SERS substrates. This study demonstrates the application of ultrathin covellite copper sulfide (CuS) as a cost-effective SERS substrate with a high EF value of 7.2 × 104 . The CuS substrate is readily synthesized by sulfurizing a Cu thin film at room temperature, exhibiting a Raman signal enhancement comparable to that of an Au noble metal substrate of similar thickness. Furthermore, computational simulations using the density functional theory are employed and time-resolved photoluminescence measurements are performed to investigate the enhancement mechanisms. The results indicate that polar covalent bonds (Cu─S) and strong interlayer interactions in the ultrathin CuS substrate increase the probability of charge transfer between the analyte molecules and the CuS surface, thereby producing enhanced SERS signals. The CuS SERS substrate demonstrates the selective detection of various dye molecules, including rhodamine 6G, methylene blue, and safranine O. Furthermore, the simplicity of CuS synthesis facilitates large-scale production of SERS substrates with high spatial uniformity, exhibiting a signal variation of less than 5% on a 4-inch wafer.

Uniform, Strain-Free, Large-Scale Graphene and h-BN Monolayers Enabled by Hydrogel Substrates

Translation of the unique properties of 2D monolayers from non-scalable micron-sized samples to macroscopic scale is a longstanding challenge obstructed by the substrate-induced strains, interface nonuniformities, and sample-to-sample variations inherent to the scalable fabrication methods. So far, the most successful strategies to reduce strain in graphene are the reduction of the interface roughness and lattice mismatch by using hexagonal boron nitride (h-BN), with the drawback of limited uniformity and applicability to other 2D monolayers, and liquid water, which is not compatible with electronic devices. This work demonstrates a new class of substrates based on hydrogels that overcome these limitations and excel h-BN and water substrates at strain relaxation enabling superiorly uniform and reproducible centimeter-sized sheets of unstrained monolayers. The ultimate strain relaxation and uniformity are rationalized by the extreme structural adaptability of the hydrogel surface owing to its high liquid content and low Young's modulus, and are universal to all 2D materials irrespective of their crystalline structure. Such platforms can be integrated into field effect transistors and demonstrate enhanced charge carrier mobilities in graphene. These results present a universal strategy for attaining uniform and strain-free sheets of 2D materials and underline the opportunities enabled by interfacing them with soft matter.

Gold-Deposited Graphene Nanosheets for Self-Cleaning Graphene Surface-Enhanced Raman Spectroscopy with Superior Charge-Transfer Contribution

The interaction of graphene with metals initiates charge-transfer interaction-induced chemical enhancements, which critically depend on the doping effect from deposited metallic configurations. In this paper, we have explored the gold nanoparticle-decorated monolayer graphene nanosheets for the large graphene-induced Raman enhancement of adsorbed analytes, indicating the surface-enhanced Raman spectroscopy (SERS) capabilities of metal-doped graphene (G-SERS). Here, the systematically sputtered Au thickness optimization procedure revealed noticeable modifications in the graphene Raman spectra and photoluminescence (PL) background quenching, which indicated favorable charge transfer through n-type doping of chemical vapor deposition-grown graphene nanosheets. The highly consistent, individually distributed morphology of the gold nanoislands over graphene nanosheets depicted a reproducibly uniform G-SERS signal with excellent relative standard deviation values (<5%), resulting in the strongest Raman intensity enhancement factors of ∼108 (MB) (methylene blue) and 107 (DPA) (2,6-pyridinedicarboxylic acid) composed of the weakest PL background. The combined charge-transfer-induced chemical enhancement and electromagnetic enhancement from individual Au nanoislands result in a lowering of detectability down to 10-16 M (MB) and 10-11 M (DPA) concentrations with efficient time-dependent signal stability. Additionally, the GAu demonstrated its effective (∼94.4%) photocatalytic degradation capabilities by decomposing MB dye molecules from a concentration of 1 μM to 2.52 fM within 60 min. Therefore, the prominent charge-transfer contribution through controlled Au decoration over graphene nanosheets provides a potential strategy for fabricating superior SERS sensors and photocatalysts exhibiting adequate signal consistency, stability, and photodegradation efficiency through overcoming the limitations of the traditional sensing platforms.

Dynamic repulsive interaction enables an asymmetric electron-phonon coupling for improving Raman scattering

Two-dimensional (2D) materials are an excellent platform for surface-enhanced Raman spectroscopy (SERS). For ReS2, the Raman enhancement effect can be highly improved through the dipole-dipole interactions and synergistic resonance effects in the phase-engineering ReS2 films. However, the performance of the substrate can be improved further through regulating the electronic interaction between the ReS2 and probe molecules. Herein, a dynamic coulomb repulsion strategy is proposed to trigger an electronic state redistribution by asymmetric electrostatic interactions. With the phase-engineering ReS2/graphene heterostructure as a prototype, under laser excitation, the generated hot electrons in graphene and ReS2 can repel each other due to Coulomb interaction, which breaks the symmetrical distribution of hot electrons in ReS2, and increases the electronic concentration at the interface between ReS2 and the probe molecule. With R6G as the probe molecule, the asymmetric electron distribution and synergistic resonance effects on their interface improve the limit of detection to 10-12 M with an EF of 2.15 × 108. Meanwhile, the heterostructure also shows good uniformity, stability as well as unique anisotropy. This strategy can be generalized to other 2D heterostructures to obtain the ultrasensitive SERS substrates.

Fano-type discrete-continuum interaction in perovskites and its manifestation in Raman spectral line shapes

Fano resonance is one of the most significant physical phenomena that correlates microscopic processes with macroscopic manifestations for experimental observations using different spectroscopic techniques. Owing to its importance, a focused study is required to clearly understand the origin of certain modifications in spectral behaviour, the nature of which is different for different materials. This means that a careful understanding of Fano interactions can enhance the understanding of several technologically important materials, including perovskites, which are also important in the area of energy storage and conversion. In semiconductors and nano materials (including 2-D materials), Fano interactions occur due to the intervalence or interconduction band transitions. However, in perovskites, Fano interactions are dominated by the interaction between polar phonons or excitons with electronic continuum. Raman spectroscopy, being a sensitive and non-destructive tool, detects subtle scale phenomena, such as Fano interactions, by analysing the Raman line shape. Herein, different dimensions associated with the identification and thereafter the origin of the Fano resonance in perovskites, which are used in energy related areas, have been highlighted using Raman scattering.

Boron nitride nanoplate-based strand exchange amplification with enhanced sensitivity and rapidity for quantitative detection of Staphylococcus aureus in food samples

Staphylococcus aureus is one of the most common foodborne pathogens that can cause serious food poisoning and infectious diseases in humans. Standard identification approaches include nucleic acid amplification, but current amplification tools suffer from low amplification efficiency, resulting in the risk of low sensitivity and long detection time. Herein, boron nitride nanoplates (BNNPs) were chosen as an additive for enhancing the sensitivity and rapidity of strand exchange amplification (SEA), thereby successfully expanding the application of nucleic acid detection for detecting Staphylococcus aureus in food samples. As a result, SEA based on boron nitride nanoplates (BNNP-SEA) was employed for sensitive and rapid detection of foodborne pathogen Staphylococcus aureus. Compared with classical SEA, the BNNP-based SEA assay was more than 10-fold sensitive, and the detection time was reduced by 15 minutes. The optimized BNNP-based SEA shows a wide linear range from 40 pg to 50 ng in a diluted solution of the target DNA with a low detection limit of 40 pg. Moreover, the BNNP-based SEA achieves the quantitative detection of Staphylococcus aureus in different food samples (pork, beef, mutton, duck, milk and shrimp). In contrast to the classical SEA, the BNNP-based SEA method enabled sensitive and rapid detection of Staphylococcus aureus in the above food samples at concentrations as low as 5 × 103 CFU mL-1. The BNNP-based SEA assay is specific, sensitive and reliable, offering a valuable diagnostic technology for routine analysis in food safety research.

Functionalized Multiwalled Carbon Nanotubes for Highly Stable Room Temperature and Humidity-Tolerant Triethylamine Sensing

Triethylamine (TEA) poses a significant threat to our health and is extremely difficult to detect at the parts-per-billion (ppb) level at room temperature. Carbon nanotubes (CNTs) are versatile materials used in chemiresistive vapor sensing. However, achieving high sensitivity and selectivity with a low detection limit remains a challenge for pristine CNTs, hindering their widespread commercial application. To address these issues, we propose functionalized multiwalled CNTs (MWCNTs) with carboxylic acid (COOH)-based sensing channels for ultrasensitive TEA detection under ambient conditions. Advanced structural analyses confirmed the necessary modification of MWCNTs after functionalization. The sensor exhibited excellent sensitivity to TEA in air, with a superior noise-free signal (10 ppb), an extremely low limit of detection (LOD ≈ 0.8 ppb), excellent repeatability, and long-term stability under ambient conditions. Moreover, the response values became more stable, demonstrating excellent humidity resistance (40-80% RH). Notably, the functionalized MWCNT sensor exhibited improved response and recovery kinetics (200 and 400 s) to 10 ppm of TEA compared to the pristine MWCNT sensor (400 and 1300 s), and the selectivity coefficient for TEA gas was improved by approximately three times against various interferants, including ammonia, formaldehyde, nitrogen dioxide, and carbon monoxide. The remarkable improvements in TEA detection were mainly associated with the large specific surface area, abundant active sites, adsorbed oxygen, and other defects. The sensing mechanism was thoroughly explained by using Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and gas chromatography-mass spectrometry (GC-MS). This study provides a new platform for CNT-based chemiresistive sensors with high selectivity, low detection limits, and enhanced precision with universal potential for applications in food safety and environmental monitoring.

An Emerging Family of Piezocatalysts: 2D Piezoelectric Materials

Piezocatalysis is an emerging technique that holds great promise for the conversion of ubiquitous mechanical energy into electrochemical energy through piezoelectric effect. However, mechanical energies in natural environment (such as wind energy, water flow energy, and noise) are typically tiny, scattered, and featured with low frequency and low power. Therefore, a high response to these tiny mechanical energies is critical to achieving high piezocatalytic performance. In comparison to nanoparticles or 1D piezoelectric materials, 2D piezoelectric materials possess characteristics such as high flexibility, easy deformation, large surface area, and rich active sites, showing more promise in future for practical applications. In this review, state-of-the-art research progresses on 2D piezoelectric materials and their applications in piezocatalysis are provided. First, a detailed description of 2D piezoelectric materials are offered. Then a comprehensive summary of the piezocatalysis technique is presented and examines the piezocatalysis applications of 2D piezoelectric materials in various fields, including environmental remediation, small-molecule catalysis, and biomedicine. Finally, the main challenges and prospects of 2D piezoelectric materials and their applications in piezocatalysis are discussed. It is expected that this review can fuel the practical application of 2D piezoelectric materials in piezocatalysis.

Large area CVD-grown vertically and horizontally oriented MoS2 nanostructures as SERS biosensors for single molecule detection

Surface-enhanced Raman scattering (SERS) has attracted extensive attention for its rapid, ultra-sensitive, non-destructive and label-free fingerprint detection of trace molecules. Recently, two-dimensional transition metal dichalcogenides have been investigated as SERS substrates owing to their low cost, simple synthesis, excellent optical behavior, tunable bandgap, high carrier mobility and good biocompatibility. Here, we have synthesized 2H-MoS2 nanostructures of different morphologies (vertically and horizontally oriented) via the chemical vapor deposition (CVD) method on different substrates (FTO-coated glass, Si and SiO2-Si) and utilized them as SERS substrates for the detection of bilirubin and vitamin B12 biomolecules. The strong vibronic coupling within the charge transfer (CT) process leads to photo-induced charge transfer (PICT) resonance, showing enhanced SERS activity. This CT mechanism is further confirmed by observing quenching of the room temperature PL spectra and enhanced SERS signals of biomolecules over SERS substrates. To the best of our knowledge, the detection limit in this work (10-11 M for bilirubin and 10-8 M for vitamin B12) is considerably higher than previously reported values. The improved efficiency of the PICT process can be achieved at low temperature, and this is confirmed when performing low temperature-dependent photoluminescence (PL) studies on SERS substrates. Furthermore, we also demonstrated enhanced SERS activity at low temperature on CVD-grown pristine MoS2 films over different substrates for biomolecule detection for the first time, attributing this activity to the enhanced PICT process at low temperature.

Alloy Engineering Allows On-Demand Design of Ultrasensitive Monolayer Semiconductor SERS Substrates

The chemical mechanism (CM) of surface-enhanced Raman scattering (SERS) has been recognized as a decent approach to mildly amplify Raman scattering. However, the insufficient charge transfer (CT) between the SERS substrate and molecules always results in unsatisfying Raman enhancement, exerting a substantial restriction for CM-based SERS. In principle, CT is dominated by the coupling between the energy levels of a semiconductor-molecule system and the laser wavelength, whereas precise tuning of the energy levels is intrinsically difficult. Herein, two-dimensional transition-metal dichalcogenide alloys, whose energy levels can be precisely and continuously tuned over a wide range by simply adjusting their compositions, are investigated. The alloys enable on-demand construction of the CT resonance channels to cater to the requirements of a specific target molecule in SERS. The SERS signals are highly reproducible, and a clear view of the SERS dependences on the energy levels is revealed for different CT resonance terms.

Material design, development, and trend for surface-enhanced Raman scattering substrates

Surface-enhanced Raman scattering (SERS) is a powerful and non-invasive spectroscopic technique that can provide rich and specific chemical fingerprint information for various target molecules through effective SERS substrates. In view of the strong dependence of the SERS signals on the properties of the SERS substrates, design, exploration, and construction of novel SERS-active nanomaterials with low cost and excellent performance as the SERS substrates have always been the foundation and the top priority for the development and application of the SERS technology. This review specifically focuses on the extensive progress made in the SERS-active nanomaterials and their enhancement mechanism since the first discovery of SERS on the nanostructured plasmonic metal substrates. The design principles, unique functions, and influencing factors on the SERS signals of different types of SERS-active nanomaterials are highlighted, and insight into their future challenge and development trends is also suggested. It is highly expected that this review could benefit a complete understanding of the research status of the SERS-active nanomaterials and arouse the research enthusiasm for them, leading to further development and wider application of the SERS technology.

Nano-biosensor for SARS-CoV-2/COVID-19 detection: methods, mechanism and interface design

The epidemic of coronavirus disease 2019 (COVID-19) was a huge disaster to human society. The severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), which led to COVID-19, has resulted in a large number of deaths. Even though the reverse transcription-polymerase chain reaction (RT-PCR) is the most efficient method for the detection of SARS-CoV-2, the disadvantages (such as long detection time, professional operators, expensive instruments, and laboratory equipment) limit its application. In this review, the different kinds of nano-biosensors based on surface-enhanced Raman scattering (SERS), surface plasmon resonance (SPR), field-effect transistor (FET), fluorescence methods, and electrochemical methods are summarized, starting with a concise description of their sensing mechanism. The different bioprobes (such as ACE2, S protein-antibody, IgG antibody, IgM antibody, and SARS-CoV-2 DNA probes) with different bio-principles are introduced. The key structural components of the biosensors are briefly introduced to give readers an understanding of the principles behind the testing methods. In particular, SARS-CoV-2-related RNA mutation detection and its challenges are also briefly described. We hope that this review will encourage readers with different research backgrounds to design SARS-CoV-2 nano-biosensors with high selectivity and sensitivity.

Spin-gapless van der Waals heterostructure for spin gating through magnetic injection devices

Spin-gapless semiconductors (SGSs) are new magnetic zero-bandgap materials whose band structure is extremely sensitive to external influences (pressure or magnetic fields) and have great potential for high-speed and low-energy spintronics applications. The first-principles method was used to systematically study the heterostructures constructed of an asymmetric surface-functionalized Janus MXene material, Cr₂NOF, and a two-dimensional hexagonal lattice (2DH) semiconductor material and to study the effects of the electronic structure, Curie temperature, magnetism, and the design of unusual band structures and magnetic injection in the bilayer to obtain an SGS structure. Through the design and construction of Cr₂NOF/2DH van der Waals heterojunction spintronic devices, the spin-filtering effect of the devices can reach 100%, especially, realizing spin gating through magnetic injection. We report the transport mechanism of the heterojunction spintronic devices to achieve the goal of a controllable optimization of the device functions, which provides a theoretical basis for the design of MXene van der Waals heterojunctions for high-efficiency and low-power-consumption spintronic devices.

Recent development of surface-enhanced Raman scattering for biosensing

Surface-Enhanced Raman Scattering (SERS) technology, as a powerful tool to identify molecular species by collecting molecular spectral signals at the single-molecule level, has achieved substantial progresses in the fields of environmental science, medical diagnosis, food safety, and biological analysis. As deepening research is delved into SERS sensing, more and more high-performance or multifunctional SERS substrate materials emerge, which are expected to push Raman sensing into more application fields. Especially in the field of biological analysis, intrinsic and extrinsic SERS sensing schemes have been widely used and explored due to their fast, sensitive and reliable advantages. Herein, recent developments of SERS substrates and their applications in biomolecular detection (SARS-CoV-2 virus, tumor etc.), biological imaging and pesticide detection are summarized. The SERS concepts (including its basic theory and sensing mechanism) and the important strategies (extending from nanomaterials with tunable shapes and nanostructures to surface bio-functionalization by modifying affinity groups or specific biomolecules) for improving SERS biosensing performance are comprehensively discussed. For data analysis and identification, the applications of machine learning methods and software acquisition sources in SERS biosensing and diagnosing are discussed in detail. In conclusion, the challenges and perspectives of SERS biosensing in the future are presented.

Spotting the driving forces for SERS of two-dimensional nanomaterials

Recently, two-dimensional (2D) layered nanomaterials have become promising candidates for surface-enhanced Raman scattering (SERS) substrates due to their unique characteristics of ultrathin layer structure, outstanding optical properties and good biocompatibility, significantly contributing to remarkable SERS sensitivity, stability, and compatibility. Unlike traditional SERS substrates, 2D nanomaterials possess unparalleled layer-dependent, phase transition induced and anisotropic optical properties, which as driving forces significantly promote the SERS performance and development, as well as greatly enrich the SERS substrates and provide versatile resources for SERS research. For a profound understanding of the SERS effect of 2D nanomaterials, a review concentrating on these driving forces for SERS enhancement on 2D nanomaterials is written here for the first time, which strongly emphasizes the importance and influence of these driving forces on the SERS effect of 2D nanomaterials, including their intrinsic physical and chemical properties and external influencing factors. Moreover, the essential mechanisms of these driving forces for the SERS effect are also elaborated systematically. Finally, the challenges and future perspectives of SERS substrates based on 2D nanomaterials are concluded. This review will provide guiding principles and strategies for designing highly sensitive 2D nanomaterial SERS substrates and extending their potential applications based on SERS.

Ni and O co-modified MoS2 as universal SERS substrate for the detection of different kinds of substances

Surface-enhanced Raman scattering (SERS) has attracted extensive attention as an ultrasensitive detection method. However, the poor biocompatibility and expensive synthesis cost of noble metal SERS substrates have become non-negligible factors that limit the development of SERS technology. Metal chalcogenide semiconductors as an alternative to noble metal SERS substrates can avoid these disadvantages, but the enhancement effect is lower than that of noble metal substrates. Here, we report a method to co-modify MoS₂ by Ni and O, which improves the carrier concentration and mobility of MoS₂. The SERS effect of the modified MoS₂ is comparable to that of noble metals. We found that the improved SERS performance of MoS₂ can be attributed to the following two factors: strong interfacial dipole-dipole interaction and efficient charge transfer effect. During the doping process, the incorporation of Ni and O enhances the polarity and carrier concentration of MoS₂, enhances the interfacial interaction of MoS₂, and provides a basis for charge transfer. During the annealing process, the introduction of O atoms into the S defects reduces the internal defects of doped MoS₂, improves the carrier mobility, and promotes the efficient charge transfer effect of MoS₂. The final modified MoS₂ as a SERS substrate realizes low-concentration detection of bilirubin, cytochrome C, and trichlorfon. This provides promising guidance for the practical inspection of metal chalcogenide semiconductor substrates.

Extending Plasmonic Enhancement Limit with Blocked Electron Tunneling by Monolayer Hexagonal Boron Nitride

Fabricating ultrasmall nanogaps for significant electromagnetic enhancement is a long-standing goal of surface-enhanced Raman scattering (SERS) research. However, such electromagnetic enhancement is limited by quantum plasmonics as the gap size decreases below the quantum tunneling regime. Here, hexagonal boron nitride (h-BN) is sandwiched as a gap spacer in a nanoparticle-on-mirror (NPoM) structure, effectively blocking electron tunneling. Layer-dependent scattering spectra and theoretical modeling confirm that the electron tunneling effect is screened by monolayer h-BN in a nanocavity. The layer-dependent SERS enhancement factor of h-BN in the NPoM system monotonically increases as the number of layers decreases, which agrees with the prediction by the classical electromagnetic model but not the quantum-corrected model. The ultimate plasmonic enhancement limits are extended in the classical framework in a single-atom-layer gap. These results provide deep insights into the quantum mechanical effects in plasmonic systems, enabling the potential novel applications based on quantum plasmonic.

Amorphous Nitrogen-Doped Carbon Nanocages with Excellent SERS Sensitivity and Stability for Accurate Identification of Tumor Cells

The surface-enhanced Raman scattering (SERS) bioprobe's strategy for identifying tumor cells always depended on the intensity difference of the Raman signal compared with that of normal cells. Hence, exploring novel SERS nanostructure with excellent spectra stability, a high enhancement factor (EF), and good biocompatibility is a primary premise for boosting SERS signal reliability and accuracy of tumor cells. Here, high SERS EF (5.52 × 10⁶) is acquired by developing novel amorphous nitrogen-doped carbon (NDC) nanocages (NCs), whose EF value was in a leading position among carbon-based SERS substrates. In addition, a uniform SERS signal was obtained on NDC NCs due to homogeneous morphology and size. The delocalized carbon-conjugated systems of graphitic-N, pyrrole-N, and pyridine-N with lone pair electrons increase the electronic density of states and reduce the electron localization function of NDC NCs, thereby promoting the charge transfer process. The electron-donor platform of the NDC NCs facilitates the thermodynamic process of charge transfer, resulting in multimode vibrational coupling in the surface complexes, which greatly amplifies the molecular polarizability. Importantly, the good biocompatibility and signal stability endow these NDC NC SERS bioprobes unique superiority in distinguishing tumor cells, and quantitative recognition of two triple-negative breast cancer cells based on SERS detection mode has been successfully realized.

Carrier transport and photoconductivity properties of BN50/NiO50 nanocomposite films

BN₅₀/NiO₅₀ and Au-loaded BN₅₀/NiO₅₀ nanocomposite films were separately fabricated on the glass substrates for carrier transport and photoconductivity properties. X-ray diffraction pattern of the films show the hexagonal structure of BN and presence of defect states by Nelson Riley factor analysis. Morphological images show spherical shaped particles with highly porous structure. The incorporation of NiO may hindered growth of BN layers and resulted in spherical particles. Temperature-dependent conductivity describes semiconductor transport behaviour for deposited nanocomposite films. Thermal activation conduction with low activation energy (∼0.308 eV) may be responsible for the resulting conductivity. Further, the light intensity dependent photoelectrical properties of BN₅₀/NiO₅₀ and Au-loaded BN₅₀/NiO₅₀ nanocomposites have been explored. The effect of Au nanoparticles loading on enhanced photo-conductivities (∼22% increase) than bare nanocomposite film has been elaborated by proposed mechanism. This study provided the insightful information for carrier transport and photoconductivity of BN-based nanocomposites.

Monolayer Iron Oxychloride with a Resonant Band Structure for Ultrasensitive Molecular Sensing

Two-dimensional layered materials (2DLMs) are expected to be next-generation commercial sensors for surface-enhanced Raman scattering (SERS) sensing owing to their unique structural features and physicochemical properties. The low sensitivity and poor universality of 2DLMs are the dominant barriers toward their practical applications. Herein, we report that monolayer iron oxychloride (FeOCl) with a naturally suitable band structure is a promising candidate for ultrasensitive SERS sensing. The generally boosted Raman scattering cross section of different analyte-FeOCl systems benefits from the resonant photoinduced charge transfer processes and strong ground-state interactions. In addition, the strong adsorption ability of monolayer FeOCl is crucial for rapid detection in practical applications, which is proven to be much better than those of conventional SERS sensors. Consequently, monolayer FeOCl enables diverse SERS applications, including multicomponent analysis, chemical reaction monitoring, and indirect ion sensing.

Investigating the thermal conductivity and flame-retardant properties of BN/MoS2/PCNF composite film containing low BN and MoS2 nanosheets loading

Cellulose has attracted considerable attention as a potential substitute for plastics. However, the flammability and high thermal insulation properties of cellulose contradict the unique requirements for highly integrated and miniaturized electronics i.e., rapid thermal dissipation and efficient flame retardancy. In this work, cellulose was first phosphorylated to achieve intrinsic flame-retardant properties, and subsequently treated with MoS₂ and BN, ensuring efficient dispersion throughout the material. Via chemical crosslinking, a sandwich-like unit was formed, in the order of BN, MoS₂, and phosphorylated cellulose nanofibers (PCNF). The sandwich-like units were further self-assembled, layer-by-layer, to successfully create BN/MoS₂/PCNF composite films exhibiting excellent thermal conductivity and flame retardancy, and comprised a low MoS₂ and BN loading. The thermal conductivity of the BN/MoS₂/PCNF composite film containing 5 wt% BN nanosheets was higher than that of neat PCNF film. The combustion characterization of BN/MoS₂/PCNF composite films revealed highly desirable properties that were far more superior than the BN/MoS₂/TCNF (TCNF, TEMPO-oxidized cellulose nanofibers) composite films. Moreover, the toxic volatiles that escaped from flaming BN/MoS₂/PCNF composite films were significantly reduced compared to that of the BN/MoS₂/TCNF composite film alternative. The thermal conductivity and flame retardancy of BN/MoS₂/PCNF composite films have promising application prospects in highly integrated and eco-friendly electronics.

Phase Transition of MoTe2 Controlled in van der Waals Heterostructure Nanoelectromechanical Systems

This work reports experimental demonstrations of reversible crystalline phase transition in ultrathin molybdenum ditelluride (MoTe₂ ) controlled by thermal and mechanical mechanisms on the van der Waals (vdW) nanoelectromechanical systems (NEMS) platform, with hexagonal boron nitride encapsulated MoTe₂ structure residing on top of graphene layer. Benefiting from very efficient electrothermal heating and straining effects in the suspended vdW heterostructures, MoTe₂ phase transition is triggered by rising temperature and strain level. Raman spectroscopy monitors the MoTe₂ crystalline phase signatures in situ and clearly records reversible phase transitions between hexagonal 2H (semiconducting) and monoclinic 1T' (metallic) phases. Combined with Raman thermometry, precisely measured nanomechanical resonances of the vdW devices enable the determination and monitoring of the strain variations as temperature is being regulated by electrothermal control. These results not only deepen the understanding of MoTe₂ phase transition, but also demonstrate a novel platform for engineering MoTe₂ phase transition and multiphysical devices.

Engineered Two-Dimensional Nanostructures as SERS Substrates for Biomolecule Sensing: A Review

Two-dimensional nanostructures (2DNS) attract tremendous interest and have emerged as potential materials for a variety of applications, including biomolecule sensing, due to their high surface-to-volume ratio, tuneable optical and electronic properties. Advancements in the engineering of 2DNS and associated technologies have opened up new opportunities. Surface-enhanced Raman scattering (SERS) is a rapid, highly sensitive, non-destructive analytical technique with exceptional signal amplification potential. Several structurally and chemically engineered 2DNS with added advantages (e.g., π-π* interaction), over plasmonic SERS substrates, have been developed specifically towards biomolecule sensing in a complex matrix, such as biological fluids. This review focuses on the recent developments of 2DNS-SERS substrates for biomolecule sensor applications. The recent advancements in engineered 2DNS, particularly for SERS substrates, have been systematically surveyed. In SERS substrates, 2DNS are used as either a standalone signal enhancer or as support for the dispersion of plasmonic nanostructures. The current challenges and future opportunities in this synergetic combination have also been discussed. Given the prospects in the design and preparation of newer 2DNS, this review can give a critical view on the current status, challenges and opportunities to extrapolate their applications in biomolecule detection.

Recognition of dipole-induced electric field in 2D materials for surface-enhanced Raman scattering

The application of two-dimensional (2D) materials, including metallic graphene, semiconducting transition metal dichalcogenides, and insulating hexagonal boron nitride (h-BN) for surface-enhancement Raman spectroscopy has attracted extensive research interest. This article provides a critical overview of the recent developments in surface-enhanced Raman spectroscopy using 2D materials. By re-examining the relationship between the lattice structure and Raman enhancement characteristics, including vibration selectivity and thickness dependence, we highlight the important role of dipoles in the chemical enhancement of 2D materials.

Fabrication of Three-Dimensional ZnO: Ga@ITO@Ag SERS-Active Substrate for Sensitive and Repeatable Detectability

Vertically aligned ZnO: Ga nanotowers can be directly synthesized on a glass substrate with a ZnO seed film via the chemical bath method. A novel heterostructure of ZnO: Ga@ITO@Ag nanotowers was subsequently deposited in the ITO layer and Ag nanoparticles via the facile two-step ion-sputtering processes on the ZnO: Ga nanotowers. The appropriate ion-sputtering times of the ITO layer and Ag nanoparticles can benefit the fabrication of ZnO: Ga@ITO@Ag nanotowers with higher surface-enhanced Raman scattering (SERS) enhancement in detecting rhodamine 6G (R6G) molecules. Compared with ZnO: Ga@Ag nanotowers, ZnO: Ga@ITO@Ag nanotowers exhibited a high SERS enhancement factor of 2.25 × 10⁸ and a lower detection limit (10^-14 M) for detecting R6G molecules. In addition, the ITO layer used as an intermediate layer between ZnO: Ga nanotowers and Ag nanoparticles can improve SERS enhancement, sensitivity, uniformity, reusability, detection limit, and stability for detecting amoxicillin molecules. This phenomenon shall be ascribed to the ITO layer exhibiting a synergistic Raman enhancement effect through interfacial charge transfer for enhancing SERS activity. As a result, ZnO: Ga@ITO@Ag nanotowers can construct a three-dimensional SERS substrate for potential applications in environmentally friendly and cost-effective chemical or drug detection.

Two dimensional monolayers TetraHex-CX2 (X = N, P, As, and Sb) with superior electronic, mechanical and optical properties

The discovery of graphene in 2004 opened a new world of two dimensional (2D) materials, stimulating the broad explorations of other novel 2D carbon structures and their derivatives in many materials fields. Although many 2D materials have been proposed theoretically, the experimental fabrication of them remains a big challenge, leading to more efforts to explore novel 2D materials with excellent properties. Here, we constructed four 2D monolayers TetraHex-CX₂ (X = N, P, As, and Sb) using first-principles calculations. These thin materials composed of tetragonal and hexagonal rings exhibit good stabilities, extraordinarily flexible mechanical properties, indirect bandgaps (≤2.30 eV except TetraHex-CN₂) with a semiconducting nature and a strong optical absorption up to 10⁵ cm^-1, showing the potential nanomechanical, nanoelectronic and optoelectronic applications. On building the structure-property relationship, we found that the Pauling electronegativity of X has an important influence on the electronic and mechanical properties of CX₂, which provides a significant understanding of the fundamental origin of materials properties and is helpful to design novel 2D materials with special properties.

Grain-Boundary-Induced Ultrasensitive Molecular Detection of Graphene Film

Graphene has been considered a promising platform for molecular detection due to the graphene-enhanced Raman scattering (GERS) effect. However, the GERS performance of pristine graphene is limited by a low chemically active surface and insufficient density of states (DOS). Although diverse defects have been introduced, it remains a great challenge to improve the enhancement performance. Here, we show that graphene grain boundaries (GBs) possess stronger adsorption capacity and more abundant DOS. Thus, GERS performance increases with the atomic percentage of GBs, which makes nanocrystalline graphene (NG) film a superior GERS substrate. For R6G as a probe molecule, a low detection limit of 3 × 10^-10 M was achieved. Utilizing the high chemical activity of GBs, we also fabricated NG film decorated with Au particles using a one-step quenching strategy, and this hybrid film exhibits an extremely low limit of detection down to 5 × 10^-11 M, outperforming all the reported graphene-based systems.

Efficient Hot Electron Capture in CuPc/MoSe2 Heterostructure Assisted by Intersystem Crossing

Efficient hot electron extraction is a promising approach to develop photovoltaic devices that exceed the Shockley-Queisser limit. However, experimental evidence of hot electron harvesting employing an organic-inorganic interface is still elusive. Here, we reveal the hot electron dynamics at a CuPc/MoSe₂ interface using steady-state spectroscopy and transient absorption spectroscopy. A hot electron transfer efficiency of greater than 78% from MoSe₂ to CuPc is observed, comparable to that achieved in quantum dot hybrid systems. The mechanism is proposed as follows: the photogenerated hot electrons in MoSe₂ transfer to CuPc and form singlet charge transfer states, which subsequently transform into triplet charge transfer states assisted by the rapid intersystem crossing, inhibiting back-donation of electrons and facilitating exciton dissociation into CuPc polarons with a nanosecond lifetime. Our results demonstrate that the intersystem crossing of the hybrid electronic state at organic-inorganic interfaces may serve as a scheme to enable efficient hot electron extraction in photovoltaic devices.

Emerging SERS biosensors for the analysis of cells and extracellular vesicles

Cells and their derived extracellular vesicles (EVs) or exosomes contain unique molecular signatures that could be used as biomarkers for the detection of severe diseases such as cancer, as well as monitoring the treatment response. Revealing these molecular signatures requires developing non-invasive ultrasensitive tools to enable single molecule/cell-level detection using a small volume of sample with low signal-to-noise ratio background and multiplex capability. Surface-enhanced Raman scattering (SERS) can address the current limitations in studying cells and EVs through two main mechanisms: plasmon-enhanced electric field (the so-called electromagnetic mechanism (EM)), and chemical mechanism (CM). In this review, we first highlight these two SERS mechanisms and then discuss the nanomaterials that have been used to develop SERS biosensors based on each of the aforementioned mechanisms as well as the combination of these two mechanisms in order to take advantage of the synergic effect between electromagnetic enhancement and chemical enhancement. Then, we review the recent advances in designing label-aided and label-free SERS biosensors in both colloidal and planar systems to investigate the surface biomarkers on cancer cells and their derived EVs. Finally, we discuss perspectives of emerging SERS biosensors in future biomedical applications. We believe this review article will thus appeal to researchers in the field of nanobiotechnology including material sciences, biosensors, and biomedical fields.

SERS enhancement induced by the Se vacancy defects in ultra-thin hybrid phase SnSex nanosheets

Improving the photo-induced charge transfer (PICT) efficiency by adjusting the energy levels difference between adsorbed probe molecules and substrate materials is a key factor for boosting the surface enhanced Raman scattering (SERS) based on the chemical mechanism (CM). Herein, a new route to improve the SERS activity of two-dimensional (2D) selenium and tin compounds (SnSe_x, 1 ≤ x ≤ 2) by the hybrid phase materials is researched. The physical properties and the energy band structure of SnSe_x were analyzed. The enhanced SERS activity of 2D SnSe_x can be attribute to the coupling of the PICT resonance caused by the defect energy levels induced by Se vacancy and the molecular resonance Raman scattering (RRS). This established a relationship between the physical properties and SERS activity of 2D layered materials. The resonance probe molecule, rhodamine (R6G), which is used to detect the SERS performance of SnSe_x nanosheets. The enhancement factor (EF) of R6G on the optimized SnSe_1.35 nanosheets can be as high as 2.6 × 10⁶, with a detection limit of 10^-10 M. The SERS result of the environmental pollution, thiram, shows that the SnSe_x nanosheets have a practical application in trace SERS detection, without the participation of metal particles. These results demonstrate that, through hybrid phase materials, the SERS sensitivity of 2D layered nanomaterials can be improved. It provides a kind of foreground non-metal SERS substrate in monitoring or detecting and provide a deep insight into the chemical SERS mechanism based on 2D layered materials.

Dimensional Design for Surface-Enhanced Raman Spectroscopy

Surface-enhanced Raman spectroscopy (SERS) is a vibrational spectroscopy technique that enables specific identification of target analytes with sensitivity down to the single-molecule level by harnessing metal nanoparticles and nanostructures. Excitation of localized surface plasmon resonance of a nanostructured surface and the associated huge local electric field enhancement lie at the heart of SERS, and things will become better if strong chemical enhancement is also available simultaneously. Thus, the precise control of surface characteristics of enhancing substrates plays a key role in broadening the scope of SERS for scientific purposes and developing SERS into a routine analytical tool. In this review, the development of SERS substrates is outlined with some milestones in the nearly half-century history of SERS. In particular, these substrates are classified into zero-dimensional, one-dimensional, two-dimensional, and three-dimensional substrates according to their geometric dimension. We show that, in each category of SERS substrates, design upon the geometric and composite configuration can be made to achieve an optimized enhancement factor for the Raman signal. We also show that the temporal dimension can be incorporated into SERS by applying femtosecond pulse laser technology, so that the SERS technique can be used not only to identify the chemical structure of molecules but also to uncover the ultrafast dynamics of molecular structural changes. By adopting SERS substrates with the power of four-dimensional spatiotemporal control and design, the ultimate goal of probing the single-molecule chemical structural changes in the femtosecond time scale, watching the chemical reactions in four dimensions, and visualizing the elementary reaction steps in chemistry might be realized in the near future.

The Theory of Surface-Enhanced Raman Spectroscopy on Organic Semiconductors: Graphene

Drawing on a theoretical expression previously derived for general semiconductor substrates, we examine the surface-enhancement of the Raman signal (SERS) when the substrate is chosen to be monolayer graphene. The underlying theory involves vibronic coupling, originally proposed by Herzberg and Teller. Vibronic coupling of the allowed molecular transitions with the charge-transfer transitions between the molecule and the substrate has been shown to be responsible for the SERS enhancement in semiconductor substrates. We then examine such an expression for the Raman enhancement in monolayer graphene, which is dependent on the square of the derivative of the density of states of the graphene. On integration, we find that the discontinuity of the density-of-states function leads to a singularity in the SERS intensity. Knowledge of the location of this resonance allows us to maximize the Raman intensity by careful alignment of the doping level of the graphene substrate with the charge-transfer transition.