Plasmonic nanosnowmen with a conductive junction as highly tunable nanoantenna structures and sensitive, quantitative and multiplexable surface-enhanced Raman scattering probes

Open Cross-gap Gold Nanocubes with Strong, Large-Area, Symmetric Electromagnetic Field Enhancement for On-Particle Molecular-Fingerprint Raman Bioassays

Plasmonic nanoparticles with an externally open nanogap can localize the electromagnetic (EM) field inside the gap and directly detect the target via the open nanogap with surface-enhanced Raman scattering (SERS). It would be beneficial to design and synthesize the open gap nanoprobes in a high yield for obtaining uniform and quantitative signals from randomly oriented nanoparticles and utilizing these particles for direct SERS analysis. Here, we report a facile strategy to synthesize open cross-gap (X-gap) nanocubes (OXNCs) with size- and EM field-tunable gaps in a high yield. The site-specific growth of Au budding structures at the corners of the AuNC using the principle that the Au deposition rate is faster than the surface diffusion rate of the adatoms allows for a uniform X-gap formation. The average SERS enhancement factor (EF) for the OXNCs with 2.6 nm X-gaps was 1.2 × 109, and the EFs were narrowly distributed within 1 order of magnitude for ∼93% of the measured OXNCs. OXNCs consistently displayed strong EM field enhancement on large particle surfaces for widely varying incident light polarization directions, and this can be attributed to the symmetric X-gap geometry and the availability of these gaps on all 6 faces of a cube. Finally, the OXNC probes with varying X-gap sizes have been utilized in directly detecting biomolecules with varying sizes without Raman dyes. The concept, synthetic method, and biosensing results shown here with OXNCs pave the way for designing, synthesizing, and utilizing plasmonic nanoparticles for selective, quantitative molecular-fingerprint Raman sensing and imaging applications.

Distinct plasma phosphorylated-tau proteins profiling for the differential diagnosis of mild cognitive impairment and Alzheimer's disease by plasmonic asymmetric nanobridge-based biosensor

The differential diagnosis between mild cognitive impairment (MCI) and Alzheimer's disease (AD) has been highly demanded for its effectiveness in preventing and contributing to early diagnosis of AD. To this end, we developed a single plasmonic asymmetric nanobridge (PAN)-based biosensor to differentially diagnose MCI and AD by quantitative profiling of phosphorylated tau proteins (p-tau) in clinical plasma samples, which revealed a significant correlation with AD development and progression. The PAN was designed to have a conductive junction and asymmetric structure, which was unable to be synthesized by the traditional thermodynamical methods. For its unique morphological characteristics, PAN features high electromagnetic field enhancement, enabling the biosensor to achieve high sensitivity, with a limit of detection in the attomolar regime for quantitative analysis of p-tau. By introducing support vector machine (SVM)-based machine learning algorithm, the improved diagnostic system was achieved for prediction of healthy controls, MCI, and AD groups with an accuracy of 94.47 % by detecting various p-tau species levels in human plasma. Thus, our proposed PAN-based plasmonic biosensor has a powerful potential in clinical utility for predicting the onset of AD progression in the asymptomatic phase.

Exclusive Core-Janus Satellite Assembly Based on Au-Ag Janus Self-Aligned Distributions with Abundant Hotspots for Ultrasensitive Detection of CA19-9

The development of surface-enhanced Raman scattering (SERS) probes with high sensitivity and stability is imminent to improve the accuracy of cancer diagnosis. Here, an exclusive core-Janus satellite (CJS) assembly was constructed by a hierarchical assembly strategy in which the Au-Ag Janus satellite is vertically self-aligned on the core surface. In the process, a silica shell template was ingeniously employed to asymmetrically mask the presatellites for the in situ formation of the Janus structure, and a series of Janus satellites with different morphologies were developed by regulating the encapsulated area of the presatellites. The ordered-oriented arrangement of Au-Ag Janus and unique heterojunction morphology permit CJS assemblies, featuring two types of plasmonic nanogaps, including intrananocrevices for individual Janus and internanogaps between neighboring Janus, thereby multiplying the "hotspots" compared to conventional core-monotonous satellites, which contributes to superior SERS activity. As anticipated, the enhancement factor of CJS assemblies was as high as 3.8 × 108. Moreover, it is intriguing that the directional distribution and head physically immobilized by Janus provided uniform and stable SERS signals. The SERS probe based on the CJS assembly for the detection of carbohydrate antigen 19-9 resulted in an ultrahigh sensitivity with a limit of detection of 3.7 × 10-5 IU·mL-1, which is nearly 10 times lower than other SERS probes, and a wide detection range of 3 × 10-5 to 1 × 104 IU·mL-1. The CJS assembly with excellent SERS performance is promising to advance further development of the early diagnosis of pancreatic cancer.

Discovering polyelemental nanostructures with redistributed plasmonic modes through combinatorial synthesis

Coupling plasmonic and functional materials provides a promising way to generate multifunctional structures. However, finding plasmonic nanomaterials and elucidating the roles of various geometric and dielectric configurations are tedious. This work describes a combinatorial approach to rapidly exploring and identifying plasmonic heteronanomaterials. Symmetry-broken noble/non-noble metal particle heterojunctions (~100 nanometers) were synthesized on multiwindow silicon chips with silicon nitride membranes. The metal types and the interface locations were controlled to establish a nanoparticle library, where the particle morphology and scattering color can be rapidly screened. By correlating structural data with near- and far-field single-particle spectroscopy data, we found that certain low-energy plasmonic modes could be supported across the heterointerface, while others are localized. Furthermore, we found a series of triangular heteronanoplates stabilized by epitaxial Moiré superlattices, which show strong plasmonic responses despite largely comprising a lossy metal (~70 atomic %). These architectures can become the basis for multifunctional and cost-effective plasmonic devices.

Colloidal SERS measurement of enrofloxacin with petaloid nanostructure clusters formed by terminal deoxynucleotidyl transferase catalyzed cytosine-constituted ssDNA

We developed petal-like plasmonic nanoparticle (PLNP) clusters-based colloidal SERS method for enrofloxacin (EnFX) detection. PLNPs were synthesized by the regulation of single-stranded DNA composed of homo-cytosine deoxynucleotides (hC) catalyzed by terminal deoxynucleotidyl transferase. SERS hot spots were created via the agglomeration process of PLNPs by adding an inorganic salt potassium iodide solution, in which EnFX molecules were attached to the negatively charged PLNPs surface by electrostatic interactions. This approach enabled direct in situ detection of antibiotic residues, achieving a limit of detection (LOD) of 1.15 μg/kg for EnFX. The spiked recoveries of the SERS method were approximately 92.7% to 107.2% and the RSDs ranged from 1.05% to 7.8%, indicating that the method can be applied to actual sample detection. This colloidal SERS measurement platform would be very promising in various applications, especially in real-time and on-site food safety screening owing to its rapidness, simplicity, and sensitivity.

Assembly and Healing: Capacitive and Conductive Plasmonic Interfacing via a Unified and Clean Wet Chemistry Route

Solution-based nanoparticle assembly represents a highly promising way to build functional metastructures based on a wealth of synthetic nanomaterial building blocks with well-controlled morphology and crystallinity. In particular, the involvement of DNA molecular programming in these bottom-up processes gradually helps the ambitious goal of customizable chemical nanofabrication. However, a fundamental challenge is to realize strong interunit coupling in an assembly toward emerging functions and applications. Herein, we present a unified and clean strategy to address this critical issue based on a H2O2-redox-driven "assembly and healing" process. This facile solution route is able to realize both capacitively coupled and conductively bridged colloidal boundaries, simply switchable by the reaction temperature, toward bottom-up nanoplasmonic engineering. In particular, such a "green" process does not cause surface contamination of nanoparticles by exogenous active metal ions or strongly passivating ligands, which, if it occurs, could obscure the intrinsic properties of as-formed structures. Accordingly, previously raised questions regarding the activities of strongly coupled plasmonic structures are clarified. The reported process is adaptable to DNA nanotechnology, offering molecular programmability of interparticle charge conductance. This work represents a new generation of methods to make strongly coupled nanoassemblies, offering great opportunities for functional colloidal technology and even metal self-healing.

Site-selective growth and plasmonic spectral properties of L-shaped Janus Au-Ag gold nanodumbbells for surface-enhanced Raman scattering

Ligand-mediated interface control has been broadly applied as a powerful tool in constructing asymmetric multicomponent nanoparticles (AMNP), and induces the anisotropic growth with fine-tuning morphology, composition, plasmonic property and functionality. As a new kind of AMNP, the synthesis of Janus Au-Ag nanoparticles with tunable negative surface curvature is still a challenge. Here, we demonstrate that the synergistic surface energy effects between gold nanodumbbells (Au NDs) with a negative surface curvature and 4-mercaptobenzoic acid (4-MBA) can direct the site-selective growth of anisotropic silver domains on gold nanodumbbells (Au NDs@Ag NPs). By adjusting the 4-MBA concentration-dependent interfacial energy, the Au NDs@Ag NPs could be continuously tuned from dumbbell-like core-shell structures, to L-shaped Janus, and then rod-like core-shell structures with directional and asymmetric spatial distributions of resizable Ag domains by site-selective growth. Based on the calculation results of discrete dipole approximation (DDA) method, it has been found that the Au NDs@Ag L-shaped Janus NPs with Ag island domains created polarization orientation-dependent plasmonic extinction spectra and hot spots around the negatively curved waist and Ag domains. The L-shaped Janus Au NDs@Ag NPs exhibited significantly plasmonic spectrum properties with four apparent LSPR peaks that cover from visible to near-infrared range and higher surface-enhanced Raman scattering (SERS) activity compared with the original Au NDs. The best SERS enhancement factor of 1.41 × 10⁷ was achieved. This synergistic surface energy effect-based method involving the asymmetric growth of silver coating on gold nanoparticles with negatively curved surface presents a new method to design and fabricate nanometer optical devices based on asymmetric multicomponent nanoparticles.

Modulating the Charge Transfer Plasmon in Bridged Au Core-Satellite Homometallic Nanostructures

The localized surface plasmon resonance (LSPR) is one of the important properties for noble metal nanoparticles. Tuning the LSPR on demand thus has attracted tremendous interest. Beyond the size and shape control, manipulating intraparticle coupling is an effective way to tailor their LSPR. The charge transfer plasmon (CTP) is the most important mode of conductive coupling between subunits linked by conductive bridges that are well studied for structures prepared on substrates by lithography method. However, the colloidal synthesis of CTP structure remains a great challenge. This work reports the colloidal synthesis of extraordinary bridged Au core-satellite structures by exploiting the buffer effect of polydopamine shell on Au core for Au atom diffusion, in which the Au bridge is well controlled in terms of width and length. Benefiting from the tunable Au bridges, the resonance energy of the CTP can be readily controlled. As a result, the LSPR absorptions of the core-satellite structures are continuously tuned within the NIR spectral range (from 900 to >1300 nm), demonstrating their great potentials for ultrafast nano-optics and biomedical applications.

Plasmonic Dual-Gap Nanodumbbells for Label-Free On-Particle Raman DNA Assays

Metal nanostructures with a tunable plasmonic gap are useful for photonics, surface-enhanced spectroscopy, biosensing, and bioimaging applications. The use of these structures as chemical and biological sensing/imaging probes typically requires an ultra-precise synthesis of the targeted nanostructure in a high yield, with Raman dye-labeling and complex assay components and procedures. Here, a plasmonic nanostructure with tunable dual nanogaps, Au dual-gap nanodumbbells (AuDGNs), is designed and synthesized via the anisotropic adsorption of polyethyleneimine on Au nanorods to facilitate tip-selective Au growths on nanorod tips for forming mushroom-shaped dumbbell-head structures at both tips and results in dual gaps (intra-head and inter-head gaps) within a single particle. AuDGNs are synthesized in a high yield (>90%) while controlling the inter-head gap size, and the average surface-enhanced Raman scattering (SERS) enhancement factor (EF) value is 7.5 × 10⁸ with a very narrow EF distribution from 1.5 × 10⁸ to 1.5 × 10⁹ for >90% of analyzed particles. Importantly, AuDGNs enable label-free on-particle SERS detection assays through the diffusion of target molecules into the intraparticle gap for different DNA sequences with varying ATGC combinations in a highly specific and sensitive manner without a need for Raman dyes.

Precise profiling of exosomal biomarkers via programmable curved plasmonic nanoarchitecture-based biosensor for clinical diagnosis of Alzheimer's disease

Alzheimer's disease (AD) is a neurodegenerative disease of complex pathogenesis, with overt symptoms following disease progression. Early AD diagnosis is challenging due to the lack of robust biomarkers and limited patient access to diagnostics via neuroimaging and cerebrospinal fluid (CSF) tests. Exosomes present in body fluids are attracting attention as diagnostic biomarkers that directly reflect neuropathological features within the brain. In particular, exosomal miRNAs (exomiRs) signatures are involved in AD pathogenesis, showing a different expression between patients and the healthy controls (HCs). However, low yield and high homologous nature impede the accuracy and reproducibility of exosome blood-based AD diagnostics. Here, we developed a programmable curved plasmonic nanoarchitecture-based biosensor to analyze exomiRs in clinical serum samples for accurate AD diagnosis. To allow the detection of exomiRs in serum at attomolar levels, nanospaces (e.g., nanocrevice and nanocavity) were introduced into the nanostructures to dramatically increase the spectral sensitivity by adjusting the bending angle of the plasmonic nanostructure through sodium chloride concentration control. The developed biosensor classifies individuals into AD, mild cognitive impairment (MCI) patients, and HCs through profiling and quantifying exomiRs. Furthermore, integrating analysis expression patterns of multiple exosomal biomarkers improved serum-based diagnostic performance (average accuracy of 98.22%). Therefore, precise, highly sensitive serum-derived exosomal biomarker detection-based plasmonic biosensor has a robust capacity to predict the molecular pathologic of neurodegenerative disease, progression of cognitive decline, MCI/AD conversion, as well as early diagnosis and treatment.

Plasmonic Cyclic Au Nanosphere Hexamers

Rational design of plasmonic colloidal assemblies via bottom-up synthesis is challenging but would show unprecedented optical properties that strongly relate to the assembly's shape and spatial arrangement. Herein, the synthesis of plasmonic cyclic Au nanosphere hexamers (PCHs) is reported, wherein six Au nanospheres (Au NSs) are connected via thin metal ligaments. By tuning Au reduction, six dangling Au NSs are interconnected with a core hexagon nanoplate (NPL). Then, Pt atoms are selectively deposited on the edges of the spheres. After etching of the core, necklace-like nanostructures of Pt framework are obtained. Deposition of Au is followed, leading to PCHs in high yield (≈90%). Notably, PCHs exhibit the combinatorial plasmonic characteristics of individual Au NSs and the in-plane coupling of the six linked Au NSs. They yield highly uniform, reproducible, and polarization-independent single-particle surface-enhanced Raman scattering signals, which are attributed to the 2-dimensional isotropic alignment of the Au NSs. Those are applied to a SERS-based immunoassay as quantitative and qualitative single particle SERS nanoprobes. This assay shows a low limit-of-detection, down to 100 pm, which is orders of magnitude lower than those based on Au NSs, and one order of magnitude lower than an assay using analogous particles of smooth Au nanorings.

Plasmonic Au-Cu nanostructures: Synthesis and applications

Plasmonic Au-Cu nanostructures composed of Au and Cu metals, have demonstrated advantages over their monolithic counterparts, which have recently attracted considerable attention. Au-Cu nanostructures are currently used in various research fields, including catalysis, light harvesting, optoelectronics, and biotechnologies. Herein, recent developments in Au-Cu nanostructures are summarized. The development of three types of Au-Cu nanostructures is reviewed, including alloys, core-shell structures, and Janus structures. Afterwards, we discuss the peculiar plasmonic properties of Au-Cu nanostructures as well as their potential applications. The excellent properties of Au-Cu nanostructures enable applications in catalysis, plasmon-enhanced spectroscopy, photothermal conversion and therapy. Lastly, we present our thoughts on the current status and future prospects of the Au-Cu nanostructures research field. This review is intended to contribute to the development of fabrication strategies and applications relating to Au-Cu nanostructures.

Interfacial-assembly engineering of asymmetric magnetic-mesoporous organosilica nanocomposites with tunable architectures

The asymmetric morphology of nanomaterials plays a crucial role in regulating their physical and chemical properties, which can be tuned by two key factors: (i) interfacial interaction between seed particles and growth materials (anisotropic island nucleation) and (ii) reaction kinetics of the growth material (growth approach). However, controllable preparation of asymmetric nanoarchitectures is a daunting challenge because it is difficult to tune the interfacial energy profile of a nanoparticle. Here, we report an interfacial-assembly strategy that makes use of different surfactant/organosilica-oligomer micelles to actively regulate interfacial energy profiles, thus enabling controllable preparation of well-defined asymmetric nanoarchitectures (i.e., organosilica nano-tails) on magnetic Fe₃O₄ nanoparticles. For our magnetic nanocomposite system, the assembly structure of surfactant/organosilica-oligomer micelles and the interfacial electrostatic interaction are found to play critical roles in controlling the nucleation and architectures of asymmetric magnetic-mesoporous organosilica nanocomposite particles (AMMO-NCPs). Surfactant/organosilica-oligomer micelles with a one-dimensional wormlike linear structure could strengthen the interfacial assembly behavior between seed particles and growth materials, and thus achieved the longest tail length (25 μm) exceeding the previously reported highest recorded value (2.5 μm) of one order of magnitude. In addition, clickable AMMO-NCPs can employ a thiol-ene click reaction to modify their surface with a broad range of functional groups, such as amines, carboxyls, and even long alkyl chains, which allows for expanding functionalities. We demonstrate that C18 alkyl-grafted AMMO-NCPs can self-assemble into self-standing membranes with robust superhydrophobicity. In addition, carboxyl-modified AMMO-NCPs exhibit excellent adsorption capacity for cationic compounds. This study paves the way for designing and synthesizing asymmetric nanomaterials, which possess immense potential for future engineering applications in nanomaterial assembly, nanoreactors, biosensing, drug delivery, and beyond.

Pattern Recognition Directed Assembly of Plasmonic Gap Nanostructures for Single-Molecule SERS

Gold nanocubes (AuNCs) with tunable localized surface plasmon resonance properties are good candidates for plasmonic gap nanostructures (PGNs) with hot spots (areas with intense electric field localization). Nevertheless, it remains challenging to create shape-controllable nanogaps between AuNCs. Herein, we report a DNA origami directed pattern recognition strategy to assemble AuNCs into PGNs. By tuning the position and number of capture strands on the DNA origami template, different geometrical configurations of PGNs with nanometer-precise and shape-controllable gaps are created. The localized field enhancement in these gaps can generate hot spots that are in accordance with finite difference time domain simulations. Benefiting from the single Raman probe molecule precisely anchored at these nanogaps, the dramatic enhanced electromagnetic fields localized in hot spots arouse stronger single-molecule SERS (SM-SERS) signals. This method can be utilized in the design of ultrahigh-sensitivity photonic devices with tailored optical properties and SERS-based applications.

Twinned-Au-tip-induced growth of plasmonic Au-Cu Janus nanojellyfish in upconversion luminescence enhancement

The metallic Janus nanoparticle is an emerging plasmonic nanostructure that has attracted attention in the fields of materials science and nanophotonics. The instability of the Cu nanostructure leads to very complex nucleation and growth kinetics, and synthesis of Cu Janus nanoparticle has challenges. Here, we report a new method for synthesis of Au-Cu Janus nanojellyfish (JNF) by using twinned tips of Au nanoflower (NF) as seeds. The twinned nanotip of the Au NF and the large lattice mismatch between Au and Cu can induce formation of twin defects during the growth process, resulting in asymmetric deposition of Cu atoms. The symmetry-breaking using different sizes of Au NF and Cu nanodomains within the Au-Cu JNF can controllably change the localized surface plasmon resonance (LSPR) modes. The asymmetric Au-Cu JNF can induce plasmon coupling between dipolar and multipolar modes, which leads to clear electric-field enhancement in the near-infrared region. An Au-Cu JNF with multiple LSPR modes was chosen to simultaneously match the excitation and emission bands of the lanthanide-doped upconversion nanoparticles (UCNPs). A 5000-fold enhancement of the upconversion luminescence was achieved by using single plasmonic Au-Cu JNF. The Au-Cu JNF can also provide a guide for new metallic Janus nanoparticles in the fields of plasmonic, photothermal conversion, and nanomotors.

Photoresponsive DNA materials and their applications

Photoresponsive nucleic acids attract growing interest as functional constituents in materials science. Integration of photoisomerizable units into DNA strands provides an ideal handle for the reversible reconfiguration of nucleic acid architectures by light irradiation, triggering changes in the chemical and structural properties of the nanostructures that can be exploited in the development of photoresponsive functional devices such as machines, origami structures and ion channels, as well as environmentally adaptable 'smart' materials including nanoparticle aggregates and hydrogels. Moreover, photoresponsive DNA components allow control over the composition of dynamic supramolecular ensembles that mimic native networks. Beyond this, the modification of nucleic acids with photosensitizer functionality enables these biopolymers to act as scaffolds for spatial organization of electron transfer reactions mimicking natural photosynthesis. This review provides a comprehensive overview of these exciting developments in the design of photoresponsive DNA materials, and showcases a range of applications in catalysis, sensing and drug delivery/release. The key challenges facing the development of the field in the coming years are addressed, and exciting emergent research directions are identified.

Polysorbate- and DNA-Mediated Synthesis and Strong, Stable, and Tunable Near-Infrared Photoluminescence of Plasmonic Long-Body Nanosnowmen

Direct photoluminescence (PL) from metal nanoparticles (NPs) without chemical dyes is promising for sensing and imaging applications since this offers a highly tunable platform for controlling and enhancing the signals in various conditions and does not suffer from photobleaching or photoblinking. It is, however, difficult to synthesize metal NPs with a high quantum yield (QY), particularly in the near-infrared (NIR) region where deep penetration and reduced light scattering are advantageous for bioimaging. Herein, we designed and synthesized Au-Ag long-body nanosnowman structures (LNSs), facilitated by polysorbate 20 (Tween 20). The DNA-engineered conductive junction between the head and body parts results in a charge transfer plasmon (CTP) mode in the NIR region. The junction morphology can be controlled by the DNA sequence on the Au core, and polythymine and polyadenine induced thick and thin junctions, respectively. We found that the LNSs with a thicker conductive junction generates the stronger CTP peak and PL signal than the LNSs with a thinner junction. The Au-Ag LNSs showed much higher intensities in both PL and QY than widely studied Au nanorods with similar localized surface plasmon resonance wavelengths, and notably, the LNSs displayed high photostability and robust, sustainable PL signals under continuous laser exposure for >15 h. Moreover, the PL emission from Au-Ag LNSs could be imaged in a deeper scattering medium than fluorescent silica NPs. Finally, highly robust PL-based cell images can be obtained using Au-Ag LNSs without significant signal change while repetitively imaging cells. The results offer the insights in plasmonic NIR probe design, and show that chemical dye-free LNSs can be a very promising candidate with a high QY and a robust, reliable NIR PL signal for NIR sensing and imaging applications.

Gold@silver nanodumbbell based inter-nanogap aptasensor for the surface enhanced Raman spectroscopy determination of ochratoxin A

Here, a plasmonic nanogap structure was fabricated with its specific surface enhanced Raman spectroscopy (SERS) effect to construct an aptasensor for the sensitive detection of ochratoxin A (OTA). Gold nanorod (AuNR) were synthesized first by seed-mediated method. Then, silver was reduced and grown on its surface. In the presence of glycine, Ag⁰ was preferred to grow at both ends of AuNR to form gold@silver nanodumbbell (Au@AgND). The thiolated OTA aptamer and its complementary sequence were modified on Au@AgND respectively using Ag-SH bond. Under the base complementary pairing principle, Au@AgND assembly formed with certain inter distances. The inter-nanogap structure generated more hot spots which enhanced the Raman signal of 4-hydroxybenzoic acid (4-MBA) immobilized on Au@AgND. When OTA was present, the aptamer preferentially combined to OTA and the Au@AgND assembly disintegrated. Thus, the SERS signal of 4-MBA decreased. Under the optimal conditions, the OTA concentrations were inversely proportional to SERS signal. The linear range was 0.01 ng/mL-50 ng/mL and the limit of detection (LOD) was 0.007 ng/mL. The method can be successfully applied to the detection of real sample (beer/peanut oil).

Stable SERS substrate based on highly reflective metal liquid-like films wrapped hydrogels for direct determination of small molecules in a high protein matrix

The study of the interaction between small molecules and proteins is important. Surface-enhanced Raman spectroscopy (SERS) is suitable for such applications since it has the power of detecting a molecule based on its intrinsic nature and without labeling. Herein, the MeLLFs@PAAG SERS substrate supporting highly reflective metal liquid-like films (MeLLFs) with polyacrylamide hydrogels (PAAG) has high-density "hot spots" to provide excellent SERS activity. The MeLLFs@PAAG formed by AgNPs only has less than 15% SERS activity loss when stored in the air for more than three weeks. By using rhodamine 6G (R6G) as a model analyte, the AgNPs based MeLLFs@PAAG SERS substrate exhibits an enhancement factor (EF) as high as 8.0 × 10⁶, a limit of detection (LOD) of 76.8 pM (S/N = 3). Also, the formed PAAG provided a 3D molecular network to orderly secure the assembled nanoparticles (NPs), which not only improves the stability of NPs but also shields the Raman signal of proteins as high as 45 g/L allowing the direct determination of the binding rate of human serum albumin (HSA) and doxorubicin (DOX). A binding rate of about 70% was detected, which is consistent with previous reports. Thus, proposed the MeLLFs@PAAG SERS substrate can be used as a promising candidate for SERS measurement in complex biological samples.

Controlled Assembly of Plasmonic Nanoparticles: From Static to Dynamic Nanostructures

The spatial arrangement of plasmonic nanoparticles can dramatically affect their interaction with electromagnetic waves, which offers an effective approach to systematically control their optical properties and manifest new phenomena. To this end, significant efforts were made to develop methodologies by which the assembly structure of metal nanoparticles can be controlled with high precision. Herein, recent advances in bottom-up chemical strategies toward the well-controlled assembly of plasmonic nanoparticles, including multicomponent and multifunctional systems are reviewed. Further, it is discussed how the progress in this area has paved the way toward the construction of smart dynamic nanostructures capable of on-demand, reversible structural changes that alter their properties in a predictable and reproducible manner. Finally, this review provides insight into the challenges, future directions, and perspectives in the field of controlled plasmonic assemblies.

Dual Plasmon Resonances and Tunable Electric Field in Structure-Adjustable Au Nanoflowers for Improved SERS and Photocatalysis

Flower-like metallic nanocrystals have shown great potential in the fields of nanophononics and energy conversion owing to their unique optical properties and particular structures. Herein, colloid Au nanoflowers with different numbers of petals were prepared by a steerable template process. The structure-adjustable Au nanoflowers possessed double plasmon resonances, tunable electric fields, and greatly enhanced SERS and photocatalytic activity. In the extinction spectra, Au nanoflowers had a strong electric dipole resonance located around 530 to 550 nm. Meanwhile, a longitudinal plasmon resonance (730~760 nm) was obtained when the number of petals of Au nanoflowers increased to two or more. Numerical simulations verified that the strong electric fields of Au nanoflowers were located at the interface between the Au nanosphere and Au nanopetals, caused by the strong plasmon coupling. They could be further tuned by adding more Au nanopetals. Meanwhile, much stronger electric fields of Au nanoflowers with two or more petals were identified under longitudinal plasmon excitation. With these characteristics, Au nanoflowers showed excellent SERS and photocatalytic performances, which were highly dependent on the number of petals. Four-petal Au nanoflowers possessed the highest SERS activity on detecting Rhodamine B (excited both at 532 and 785 nm) and the strongest photocatalytic activity toward photodegrading methylene blue under visible light irradiation, caused by the strong multi-interfacial plasmon coupling and longitudinal plasmon resonance.

A rapid and sensitive fluorescence biosensor based on plasmonic PCR

Plasmonic PCR utilizing metallic nanoparticles has shown great advantages compared to the commercial thermocycler equipment in terms of cost, size and processing time. However, due to the strong fluorescence quenching, plasmonic nanoparticle-based PCR requires additional post-processing steps such as centrifugation and gel electrophoresis. This process increases the overall diagnostic time, offsetting the benefits of fast thermocycling. Here, we report a rapid and sensitive plasmonic photothermal PCR (PPT-PCR) assay method based on in situ end-point fluorescence detection. By using plasmonic magnetic bi-functional nanoparticles, PPT-PCR involving 30 thermocycles and fluorescence detection following magnetic separation has successfully shown that DNA targets can be detected within 5.5 minutes. The limit of detection (3.3 copies per μL) is comparable with that of the conventional real-time quantitative PCR; however, the assay time is about 5.5 times shorter for the PPT-PCR. The strategy of combining the photothermal effect and magnetic separation into a single particle will open new horizons in the development of fast and sensitive PCR-based biosensors for point-of care testing.

Designing caps for colloidal Au nanoparticles

The plasmonic property of a nanostructure is highly dependent on its morphology, but there are few methods for appending a domain as the "functional group" or modifier. As a means of modulating plasmonic properties, we create and modulate Au hats on Au nanoparticles, including mortarboards, beret hats, helmets, crowns, antler hats and antenna hats. The structural control arises from the active surface growth as a result of dynamic competition between ligand absorption and metal deposition. It allows the continuous tuning of hat morphologies, from the facet-controlled growth of mortarboards, to the spreading-favored growth of beret hats and helmets, and to the vertical growth of pillars in crowns, antler hats and antenna hats. Among these plasmonic nanostructures, the mortarboards show excellent SERS enhancement of 8.1 × 105, which is among the best in colloidal nanostructures; and the antler hats show the photothermal conversion efficiency of 66.2%, which compares favorably with the literature reports.

Nanogap-Rich TiO2 Film for 2000-Fold Field Enhancement with High Reproducibility

Titanium dioxide (TiO₂) is a crucial semiconductor for photocatalysts, solar cells, hydrogen evolution reactions, and antivirus agents. The properties and performances of these applications can improve significantly if the integrated TiO₂ acts as a light harvester through a large field enhancement. This study investigates the electromagnetic field enhancement of a nanogap-rich TiO₂ film with a large area, prepared by a facile dry process at room temperature. Herein, the loading pressure is applied to the TiO₂ particles for closely packing them in the film. The field enhancement, as a function of the loading pressure, is explored from the fluorescence intensity enhancement of a dye molecule. An average enhancement factor >2000 is achieved, which is a remarkable record for semiconductors. Furthermore, the reproducibility is significant; the relative standard deviation value is small (∼4%). Calculations were performed using the finite-difference-time-domain method. A nanogap of 5 nm yields the highest EF for triangular-prism TiO₂ particles.

3D Interconnected Gyroid Au-CuS Materials for Efficient Solar Steam Generation

Surface plasmon resonance (SPR), a promising technology, is beneficial for various applications, such as photothermal conversion, solar cells, photocatalysts, and sensing. However, the SPR performance may be restricted by the 1D- or 2D-distributed hotspots. The bicontinuous interconnected gyroid-structured materials have emerged in light energy conversion due to a high density of 3D-distributed hotspots, ultrahigh light-matter interactions and large scattering cross-section. Here, a series of bioinspired Au-CuS gyroid-structured materials are fabricated by precisely controlling the deposition time of CuS nanoparticles (NPs) and then adopted for solar steam generation. Specifically, Au-CuS/GMs-80 present the highest evaporation efficiency of 88.8% under normal 1 sun, with a suitable filling rate (57%) and a large inner surface area (∼2.72 × 10⁵ nm² per unit cell), which simultaneously achieves a dynamic balance between water absorption and evaporation as well as efficient heat conduction with water in nanochannels. Compared with other state-of-the-art devices, Au-CuS/GMs-80 steam generator requires a much lower photothermal component loading (<1 mg cm^-2) and still guarantees outstanding evaporation performance. This superior evaporation performance is attributed to broadband light absorption, continuous water supply, excellent heat generation and thermal insulation, and good light-heat-water interaction. The combination of 3D interconnected nanostructures with controllable metal-semiconductor deposition could provide a new method for the future design of high-performance plasmonic devices.

Plasmon-Induced Photoreduction System Allows Ultrasensitive Detection of Disease Biomarkers by Silver-Mediated Immunoassay

Current strategies for the detection of disease biomarkers often require enzymatic assays that may have limited sensitivity due to inferior stability and vulnerable catalytic activity of the enzyme. A new enzyme-free amplification method for identifying suitable biomarkers is necessary to lower the limit of detection and improve many critical diagnosis applications. Here, we presented an enzyme-free amplified plasmonic immunoassay that enhanced the detection sensitivity of disease biomarkers by combining a novel plasmon-induced silver photoreduction system with a silver nanoparticle (AgNP)-linked immunoassay. The key step to achieving ultrasensitivity was to use Ag⁺ from dissolved AgNPs that control the growth rate of the silver coating on plasmonic nanosensors under visible light illumination. We demonstrated the outstanding sensitivity and robustness of this assay by detecting the disease biomarker alpha-fetoprotein (AFP) at a low concentration of 3.3 fg mL^-1. The detection of AFP was further confirmed in the sera of hepatocellular carcinoma patients.

The assemble, grow and lift-off (AGLO) strategy to construct complex gold nanostructures with pre-designed morphologies

The construction of metallic nanostructures with customizable morphologies and complex shapes has been an essential pursuit in nanoscience. DNA nanotechnology has enabled the fabrication of increasingly complex DNA nanostructures with unprecedented specificity, programmability and sub-nanometer precision, which makes it an ideal approach to rationally organize metallic nanostructures. Here we report an Assemble, Grow and Lift-Off (AGLO) strategy to construct robust standalone gold nanostructures with pre-designed customizable shapes in solution, using only a simple 2D DNA origami sheet as a versatile transient template. Gold nanoparticle (AuNP) seeds were firstly assembled onto the pre-designed binding sites of the DNA origami template and then additional gold was slowly deposited onto the AuNP seeds. The growing seed surfaces eventually merge with adjacent seeds to generate one continuous gold nanostructure in a pre-designed shape, which can then be lifted off the origami template. Diverse customized patterns of templated AuNP seeds were successfully transformed into corresponding gold nanostructures with the target structure transformation percentage over 80%. Moreover, the AGLO strategy can be incorporated with a magnetic bead separation platform to enable the easy recycling of the excess AuNP seeds and DNA components.

DNA-Modulated Plasmon Resonance: Methods and Optical Applications

The near-field effects in the vicinity of metallic nanoparticle surfaces, as induced by electromagnetic radiation with specific wavelength, give rise to a variety of novel optical properties and attractive applications because of surface plasmons, which are the coherent oscillations of conduction electrons on a metal surface. The interdisciplinary field of plasmonics has witnessed vigorous growth, promoting research on the modulation of plasmon resonance by constructing advanced plasmonic nanoarchitectures with controllable size, morphology, or interparticle coupling. Among diversified tools, deoxyribonucleic nucleic acid (DNA) possesses prominent superiority as a result of its designability, programmability, addressability, and ease of nanomaterial modification. In this review, we focus on the methods and optical applications of plasmon resonance modulation accomplished by DNA nanotechnology. Recent developments in the construction of DNA-mediated plasmonic nanoarchitecture and key ongoing research directions utilizing unique optical features are highlighted. Obstacles and challenges in this field are pointed out, followed by preliminary suggestions on some areas of opportunity that deserve attention.

Present and Future of Surface-Enhanced Raman Scattering

The discovery of the enhancement of Raman scattering by molecules adsorbed on nanostructured metal surfaces is a landmark in the history of spectroscopic and analytical techniques. Significant experimental and theoretical effort has been directed toward understanding the surface-enhanced Raman scattering (SERS) effect and demonstrating its potential in various types of ultrasensitive sensing applications in a wide variety of fields. In the 45 years since its discovery, SERS has blossomed into a rich area of research and technology, but additional efforts are still needed before it can be routinely used analytically and in commercial products. In this Review, prominent authors from around the world joined together to summarize the state of the art in understanding and using SERS and to predict what can be expected in the near future in terms of research, applications, and technological development. This Review is dedicated to SERS pioneer and our coauthor, the late Prof. Richard Van Duyne, whom we lost during the preparation of this article.

Realization of red plasmon shifts by the selective etching of Ag nanorods

The red plasmon shifts is realized through selective deposition of Au atoms and etching of Ag atoms on the Ag nanorods.

Ag Ion Soldering: An Emerging Tool for Sub-nanomeric Plasmon Coupling and Beyond

Self-assembly represents probably the most flexible way to construct metastructured materials and devices from a wealth of colloidal building blocks with synthetically controllable sizes, shapes, and elemental compositions. In principle, surface capping is unavoidable during the synthesis of nanomaterials with well-defined geometry and stability. The ligand layer also endows inorganic building blocks with molecular recognition ability responsible for their assembly into desired structures. In the case of plasmonic nanounits, precise positioning of them in a nanomolecule or an ordered nanoarray provides a chance to shape their electrodynamic behaviors and thereby assists experimental demonstration of modern nanoplasmonics toward practical uses. Despite previous achievements in bottom-up nanofabrication, a big challenge exists toward strong coupling and facile charge transfer between adjacent nanounits in an assembly. This difficulty has impeded a functional development of plasmonic nanoassemblies. The weakened interparticle coupling originates from the electrostatic and steric barriers of ionic/molecular adsorbates to guarantee a good colloidal stability. Such a dilemma is rooted in fundamental colloidal science, which lacks an effective solution. During the past several years, a chemical tool termed Ag ion soldering (AIS) has been developed to overcome the above situation toward functional colloidal nanotechnology. In particular, a dimeric assembly of plasmonic nanoparticles has been taken as an ideal model to study plasmonic coupling and interparticle charge transfer. This Account starts with a demonstration of the chemical mechanism of AIS, followed by a verification of its workability in various self-assembly systems. A further use of AIS to realize postsynthetic coupling of DNA-directed nanoparticle clusters evidences its compatibility with DNA nanotechnology. Benefiting from the sub-nanometer interparticle gap achieved by AIS, a conductive pathway is established between two nanoparticles in an assembly. Accordingly, light-driven charge transfer between the conductively bridged plasmonic units is realized with highly tunable resonance frequencies. These situations have been demonstrated by thermal/photothermal sintering of silica-isolated nanoparticle dimers as well as gap-specific electroless gold/silver deposition. The regioselective silver deposition is then combined with galvanic replacement to obtain catalytically active nanofoci (plasmonic nanogaps). The resulting structures are useful for real time and on-site Raman spectroscopic tracking of chemical reactions in the plasmonic hotspots (nanogaps) as well as for study of plasmon-mediated/field-enhanced catalysis. The Account is concluded by a deeper insight into the chemical mechanism of AIS and its adaption to conformation-rich structures. Finally, AIS-enabled functional pursuits are suggested for self-assembled materials with strongly coupled and easily reshapable physicochemical properties.

Multicomponent Plasmonic Nanoparticles: From Heterostructured Nanoparticles to Colloidal Composite Nanostructures

Plasmonic nanostructures possessing unique and versatile optoelectronic properties have been vastly investigated over the past decade. However, the full potential of plasmonic nanostructure has not yet been fully exploited, particularly with single-component homogeneous structures with monotonic properties, and the addition of new components for making multicomponent nanoparticles may lead to new-yet-unexpected or improved properties. Here we define the term "multi-component nanoparticles" as hybrid structures composed of two or more condensed nanoscale domains with distinctive material compositions, shapes, or sizes. We reviewed and discussed the designing principles and synthetic strategies to efficiently combine multiple components to form hybrid nanoparticles with a new or improved plasmonic functionality. In particular, it has been quite challenging to precisely synthesize widely diverse multicomponent plasmonic structures, limiting realization of the full potential of plasmonic heterostructures. To address this challenge, several synthetic approaches have been reported to form a variety of different multicomponent plasmonic nanoparticles, mainly based on heterogeneous nucleation, atomic replacements, adsorption on supports, and biomolecule-mediated assemblies. In addition, the unique and synergistic features of multicomponent plasmonic nanoparticles, such as combination of pristine material properties, finely tuned plasmon resonance and coupling, enhanced light-matter interactions, geometry-induced polarization, and plasmon-induced energy and charge transfer across the heterointerface, were reported. In this review, we comprehensively summarize the latest advances on state-of-art synthetic strategies, unique properties, and promising applications of multicomponent plasmonic nanoparticles. These plasmonic nanoparticles including heterostructured nanoparticles and composite nanostructures are prepared by direct synthesis and physical force- or biomolecule-mediated assembly, which hold tremendous potential for plasmon-mediated energy transfer, magnetic plasmonics, metamolecules, and nanobiotechnology.

Hollow Porous Gold Nanoshells with Controlled Nanojunctions for Highly Tunable Plasmon Resonances and Intense Field Enhancements for Surface-Enhanced Raman Scattering

Plasmonic metal nanostructures with nanogaps have attracted great interest owing to their controllable optical properties and intense electromagnetic fields that can be useful for a variety of applications, but precise and reliable control of nanogaps in three-dimensional nanostructures remains a great challenge. Here, we report the control of nanojunctions of hollow porous gold nanoshell (HPAuNS) structures by a facile oxygen plasma-etching process and the influence of changes in nanocrevices of the interparticle junction on the optical and sensing characteristics of HPAuNSs. We demonstrate a high tunability of the localized surface plasmon resonance (LSPR) peaks and surface-enhanced Raman scattering (SERS) detection of rhodamine 6G (R6G) using HPAuNS structures with different nanojunctions by varying the degree of gold sintering. As the neck region of the nanojunction is further sintered, the main LSPR peak shifts from 785 to 1350 nm with broadening because the charge transfer plasmon mode becomes more dominant than the dipolar plasmon mode, resulting from the increase of conductance at the interparticle junctions. In addition, it is demonstrated that an increase in the sharpness of the nanojunction neck can enhance the SERS enhancement factor of the HPAuNS by up to 4.8-fold. This enhancement can be ascribed to the more intense local electromagnetic fields at the sharper nanocrevices of interparticle junctions. The delicate change of nanojunction structures in HPAuNSs can significantly affect their optical spectrum and electromagnetic field intensity, which are critical for their practical use in a SERS-based analytical sensor as well as multiple-wavelength compatible applications.

Plasmonic Oligomers with Tunable Conductive Nanojunctions

Engineering plasmonic hot spots is essential for applications of plasmonic nanoparticles. A particularly appealing route is to weld plasmonic nanoparticles together to form more complex structures sustaining plasmons with symmetries targeted to given applications. However, control of the welding and subsequent hot spot characteristics is still challenging. Herein, we demonstrate an original method that connects gold particles to their neighbors by another metal of choice. We first assemble gold bipyramids in a tip-to-tip configuration, yielding short chains of variable length, and grow metallic junctions in a second step. We follow the chain formation and the deposition of the second metal (i.e., silver or palladium) via UV/vis spectroscopy, and we map the plasmonic properties using electron energy loss spectroscopy. The formation of silver bridges leads to a huge red shift of the longitudinal plasmon modes into the mid-infrared region, while the addition of palladium results in a red shift accompanied by significant plasmon damping.

Tailored Engineering of Bimetallic Plasmonic Au@Ag Core@Shell Nanoparticles

A distinctive synthetic method for the efficient synthesis of multifunctional bimetallic plasmonic Au@Ag core@shell nanoparticles (NPs) with tunable size, morphology, and localized surface plasmon resonance (LSPR) using Triton X-100/hexanol-1/deionized water/cyclohexane-based water-in-oil (W/O) microemulsion (ME) is described. The W/O ME acted as a "true nanoreactor" for the synthesis of Au@Ag core@shell NPs by providing a confined and controlled environment and suppressing the nucleation, growth, agglomeration, and aggregation of the NPs. High-resolution transmission electron microscopic analysis of the synthesized Au@Ag core@shell NPs revealed an "unusual core@shell" contrast, and the selected area electron diffraction and Moiré patterns showed that Au layers are paralleled to Ag layers, thus indicating the formation of Au@Ag core@shell NPs. Interestingly, the UV-visible spectrum of the Au@Ag core@shell NPs exhibited enthralling plasmonic properties by introducing a high-frequency quadrupolar LSPR mode originated from the isolated Au@Ag NPs along with a low-frequency dipolar LSPR mode originated from the coupled Au@Ag NPs. The effective plasmonic enhancement of the Au@Ag core@shell NPs is attributed to the extreme enhancement of the localized electromagnetic field by coupling of the localized surface plasmons of the Au core and Ag shell. The mechanisms for the nucleation and growth of Au@Ag core@shell NPs in W/O ME have been proposed. A unique electron transfer phenomenon between the Au core and Ag shell is elucidated for better understanding and manipulation of the electronic properties, which evinced the development of Au@Ag core@shell NPs through suppression of the galvanic replacement reaction.

Surface-enhanced Raman scattering induced by the coupling of the guided mode with localized surface plasmon resonances

Surface-enhanced Raman spectroscopy (SERS) is considered to be a powerful analysis tool for the detection of molecules due to its ultra-high sensitivity and non-destructive nature. Here, we introduce a new type of hybrid SERS substrate, where gold nanorods are assembled on a structured support containing a top dielectric grating, dielectric spacer and gold mirror. Compared with the conventional metal nanoparticle assemblies on a flat support, our hybrid substrate shows an approximately 30-fold enhancement in the SERS signal. Numerical simulations show that such a substantial boost arises from the amplification of the absorption cross sections of the gold nanorods and the heating of the "hot spots" around the gold nanorods by the coupling between the guided mode in the structured support and the localized surface plasmon resonances. This mode coupling can be easily tuned by changing the thickness of the spacer. In addition, this substrate also presents uniform spot-to-spot and sample-to-sample SERS signals of the analyte molecules (relative standard deviations down to 7.4% and 6.1%, respectively). Moreover, the performance of this substrate has been demonstrated with the detection of melamine and cytosine, suggesting its great potential in food safety regulation and bioassays. This grating-mirror-enhanced strategy is available to any other SERS-active nanoparticles synthesized by chemical methods, which might offer new opportunities for improving the performance of the chemically prepared nanoparticles in realistic SERS-related applications.

Hierarchic Interfacial Nanocube Assembly for Sensitive, Selective, and Quantitative DNA Detection with Surface-Enhanced Raman Scattering

Surface-enhanced Raman scattering (SERS)-based sensing is promising in that it has potential to allow for highly sensitive, selective, and multiplexed detection and imaging. However, the controlled assembly and gap formation between plasmonic particles for generating strong SERS signals in a quantitative manner is highly challenging, especially on biodetection platforms, and particle-to-particle variation in the signal enhancement can vary by several orders of magnitude in a single batch, largely limiting the reliable use of SERS for practical sensing applications. Here, a hierarchic-nanocube-assembly based SERS (H-Cube-SERS) bioassay to controllably amplify the electromagnetic field between gold nanocubes (AuNCs) is developed. Based on this strategy, H-Cube-SERS assay allows for detecting target DNA with a wide dynamic range from 100 aM to 10 pM concentrations in a stable and reproducible manner. It is also found that the uniformly formed AuNCs with flat surfaces are much more suitable for highly sensitive, reliable, and quantitative biodetection assays due to faster DNA binding kinetics, sharper DNA melting transition, wider hot spot regions, and less dependence on light polarization direction than spherical Au nanoparticles with curved interfaces. This work paves the pathways to the quantitative and sensitive biodetection on a SERS platform and can be extended to other particle assembly systems.

Chemically modified nanofoci unifying plasmonics and catalysis

Chemical modifiability is achieved for self-assembled plasmonic nanogaps to enable charge transfer plasmon resonance and unified plasmonic and catalytic functions.

A plasmonic nanofocus, often in the form of a nanogap, is capable of concentrating light in a nanometric volume. The greatly enhanced electromagnetic field offers many opportunities in physics and chemistry. However, the lack of a method to fine-tune the chemical activities of the nanofocus has severely limited its application. Here we communicate an intriguing class of chemically modified nanofoci (CMNFs) that are able to address this challenge. Our results successfully demonstrate a possibility to functionalize the nanosized, mass-transport-restricted nanogap (nanofocus) of a dimeric gold nanoparticle assembly with homo-(Au) and heterogeneous (Ag, Pt, and Pd) materials. The as-produced structures with conductive Au and Ag junctions generate a novel form of charge transfer plasmon (CTP) with continuously tunable frequency covering the visible and near-infrared domains. In addition, the Ag materials can be displaced by catalytic Pt and Pd metals while still maintaining a tightly focused electromagnetic field. These hybrid structures with unified catalytic and plasmonic properties enable real-time, on-site probing of catalytic conversions at the nanofocus by plasmon-enhanced Raman scattering. The chemically/optically engineered CMNFs represent the simplest function-integrated nanodevices for plasmonics, sensing, and catalysis. Our work not only realizes chemical CTP reshaping, but also allows chemical functionalization into an intensified plasmonic near-field. The latter may enable unconventional chemical reactions driven by the catalytically functionalized, strongly boosted light field.

Nanosecond-Laser-Based Charge Transfer Plasmon Engineering of Solution-Assembled Nanodimers

The ability to re-engineer self-assembled functional structures with nanometer accuracy through solution-processing techniques represents a big challenge in nanotechnology. Herein we demonstrate that Ag⁺-soldered nanodimers with a steric confinement coating of silica can be harnessed to realize an in-solution nanosecond laser reshaping to form interparticle conductive pathway with finely controlled conductance. The high structural purity of the nanodimers, the rigid silica coating, and the uniform (but still adjustable) sub-1-nm interparticle gap together determine the success of the laser reshaping process. This method is applicable to DNA-assembled nanodimers, and thus promises DNA-based programming toward higher structural complexity. The resulting structures exhibit highly tunable charge transfer plasmons at visible and near-infrared frequencies dictated by the fluence of the laser pulses. Our work provides an in-solution, rapid, and nonperturbative route to realize charge transfer plasmonic coupling along prescribed paths defined by self-assembly, conferring great opportunities for functional metamaterials in the context of chemical, biological, and nanophotonic applications. The ability to continuously control a subnm interparticle gap and the nanomeric width of a conductive junction also provides a platform to investigate modern plasmonic theories involving quantum and nonlocal effects.

Quantitative Nanoplasmonics

Plasmonics, the study of the interactions between photons and collective oscillations of electrons, has seen tremendous advances during the past decade. Controllable nanometer- and sub-nanometer-scale engineering in plasmonic resonance and electromagnetic field localization at the subwavelength scale have propelled diverse studies in optics, materials science, chemistry, biotechnology, energy science, and various applications in spectroscopy. However, for translation of these accomplishments from research into practice, major hurdles including low reproducibility and poor controllability in target structures must be overcome, particularly for reliable quantification of plasmonic signals and functionalities. This Outlook introduces and summarizes the recent attempts and findings of many groups toward more quantitative and reliable nanoplasmonics, and discusses the challenges and possible future directions.

Heterogeneous and cross-distributed metal structure hybridized with MoS2 as high-performance flexible SERS substrate

The heterogeneous metal nanostructures have attracted great interest in various applications due to the synergistic effects between two noble metals, especially in surface enhanced Raman scattering (SERS) region. Herein, we prepared a 3D SERS active substrate based on heterogeneous and cross-distributed metal structure hybridized with MoS₂by in situ synthesizing gold nanoparticles (AuNPs) on MoS₂ membrane. The AuNPs-AgNPs/MoS₂/P-Si hybrid SERS substrate were characterized by a scanning electron microscope (SEM), a transmission electron microscope (TEM) and X-ray photoelectron spectroscopy (XPS) to investigate the character and the content of elements. In virtue of the heterogeneous and cross-distributed structure and ultra-narrow interparticle gap generating strong electric fields enhancement, the ultra-low concentration of probe molecule were detected (the LOD of 10^-12 M for R6G and CV, 10^-11 M for MG), serving the optimal SERS performance. The excellent uniformity and reproducibility were achieved by the proposed substrate. Moreover, the flexible MoS₂/AuNPs-AgNPs/PMMA pyramidal SERS substrate was applied to detect melamine molecule in liquid milk (the LOD reached 10^-9 M), which revealed great potential to be an outstanding SERS substrate for biological and chemical detection.

Polydopamine@Gold Nanowaxberry Enabling Improved SERS Sensing of Pesticides, Pollutants, and Explosives in Complex Samples

Surface-enhanced Raman scattering (SERS) is a promising analysis technique for detecting various analytes in complex samples due to its unique vibrational fingerprints and high signal enhancement. However, impurity interference and substrate unreliability are direct suppression factors for practical application. Herein, we synthesize polydopamine@gold (PDA@Au) nanowaxberry, where Au nanoparticles are deposited on the surface of PDA sphere with high density and uniformity. Seed-mediated synthesis is used for fabrication of nanowaxberry. Au seeds are deposited on the surface of PDA sphere, then I ion coordinating ligand is employed to form stable AuI₄^- complex with AuCl₄^-, which decreases reduction potential of AuCl₄^- and avails formation of shell structure. Such nanowaxberry has high density of voids and gaps in three-dimensional space, which could absorb analytes and benefit practical SERS detection. Using malachite green as a model analyte, nanowaxberry realizes highly sensitive detection with low limit of detection (1 pM) and good reproducibility (relative standard deviation of about 10%). Meanwhile, the nanowaxberry is employed for practical detection of thiram, benzidine, and 2,4-dinitrotoluene in the environmental water, juice, apple peel, and soil. The high performance makes nanowaxberry to be potentially used for pesticides detection, pollutants monitoring, and forbidden explosives sensing in complex samples.