Long-range fluorescence quenching by gold nanoparticles in a sandwich immunoassay for cardiac troponin T

Epidrugs in the clinical management of atherosclerosis: Mechanisms, challenges and promises

Atherosclerosis is a complex and multigenic pathology associated with significant epigenetic reprogramming. Traditional factors (age, sex, obesity, hyperglycaemia, dyslipidaemia, hypertension) and non-traditional factors (foetal indices, microbiome alteration, clonal hematopoiesis, air pollution, sleep disorders) induce endothelial dysfunction, resulting in reduced vascular tone and increased vascular permeability, inflammation and shear stress. These factors induce paracrine and autocrine interactions between several cell types, including vascular smooth muscle cells, endothelial cells, monocytes/macrophages, dendritic cells and T cells. Such cellular interactions lead to tissue-specific epigenetic reprogramming regulated by DNA methylation, histone modifications and microRNAs, which manifests in atherosclerosis. Our review outlines epigenetic signatures during atherosclerosis, which are viewed as potential clinical biomarkers that may be adopted as new therapeutic targets. Additionally, we emphasize epigenetic modifiers referred to as 'epidrugs' as potential therapeutic molecules to correct gene expression patterns and restore vascular homeostasis during atherosclerosis. Further, we suggest nanomedicine-based strategies involving the use of epidrugs, which may selectively target cells in the atherosclerotic microenvironment and reduce off-target effects.

Development of Optical Differential Sensing Based on Nanomaterials for Biological Analysis

The discrimination and recognition of biological targets, such as proteins, cells, and bacteria, are of utmost importance in various fields of biological research and production. These include areas like biological medicine, clinical diagnosis, and microbiology analysis. In order to efficiently and cost-effectively identify a specific target from a wide range of possibilities, researchers have developed a technique called differential sensing. Unlike traditional "lock-and-key" sensors that rely on specific interactions between receptors and analytes, differential sensing makes use of cross-reactive receptors. These sensors offer less specificity but can cross-react with a wide range of analytes to produce a large amount of data. Many pattern recognition strategies have been developed and have shown promising results in identifying complex analytes. To create advanced sensor arrays for higher analysis efficiency and larger recognizing range, various nanomaterials have been utilized as sensing probes. These nanomaterials possess distinct molecular affinities, optical/electrical properties, and biological compatibility, and are conveniently functionalized. In this review, our focus is on recently reported optical sensor arrays that utilize nanomaterials to discriminate bioanalytes, including proteins, cells, and bacteria.

Gold Nanoparticle-Decorated Polymer Particles for High-Optical-Density Immunoassay Probes

To realize a highly sensitive immunoassay, high-optical-density probes conjugated with antibodies for target antigens are needed to increase the detectability of antigen-antibody complex formation. In this work, gold nanoparticle (NP)-decorated polymer (GNDP) particles were successfully prepared by mixing positively charged polymer particles and negatively charged Au NPs. GNDP particles decorated with NPs of 20 nm in size had higher optical density than the original Au NPs and GNDPs decorated with smaller Au NPs. Using GNDP particles as a probe, a highly sensitive immunoassay for influenza H1N1 hemagglutinin was realized with a minimum detectable concentration of 32.5 pg/mL. These results indicate that GNDP particles have high potential as an immunoassay probe that can be used in practical immunoassay systems for detecting a wide variety of antigens.

Nanoparticle-Based Bioaffinity Assays: From the Research Laboratory to the Market

Advances in the development of new biorecognition elements, nanoparticle-based labels as well as instrumentation have inspired the design of new bioaffinity assays. This review critically discusses the potential of nanoparticles to replace current enzymatic or molecular labels in immunoassays and other bioaffinity assays. Successful implementations of nanoparticles in commercial assays and the need for rapid tests incorporating nanoparticles in different roles such as capture support, signal generation elements, and signal amplification systems are highlighted. The limited number of nanoparticles applied in current commercial assays can be explained by challenges associated with the analysis of real samples (e.g., blood, urine, or nasal swabs) that are difficult to resolve, particularly if the same performance can be achieved more easily by conventional labels. Lateral flow assays that are based on the visual detection of the red-colored line formed by colloidal gold are a notable exception, exemplified by SARS-CoV-2 rapid antigen tests that have moved from initial laboratory testing to widespread market adaption in less than two years.

Plasmonic Fluorescence Enhancement in Diagnostics for Clinical Tests at Point-of-Care: A Review of Recent Technologies

Fluorescence-based biosensors have widely been used in the life-sciences and biomedical applications due to their low limit of detection and a diverse selection of fluorophores that enable simultaneous measurements of multiple biomarkers. Recent research effort has been made to implement fluorescent biosensors into the exploding field of point-of-care testing (POCT), which uses cost-effective strategies for rapid and affordable diagnostic testing. However, fluorescence-based assays often suffer from their feeble signal at low analyte concentrations, which often requires sophisticated, costly, and bulky instrumentation to maintain high detection sensitivity. Metal- and metal oxide-based nanostructures offer a simple solution to increase the output signal from fluorescent biosensors due to the generation of high field enhancements close to a metal or metal oxide surface, which has been shown to improve the excitation rate, quantum yield, photostability, and radiation pattern of fluorophores. This article provides an overview of existing biosensors that employ various strategies for fluorescence enhancement via nanostructures and have demonstrated the potential for use as POCT. Biosensors using nanostructures such as planar substrates, freestanding nanoparticles, and metal-dielectric-metal nanocavities are discussed with an emphasis placed on technologies that have shown promise towards POCT applications without the need for centralized laboratories.

Gold nanoparticles modified reduced graphene oxide nanosheets based dual-quencher for highly sensitive detection of carcinoembryonic antigen

In the current scenario, the dominance of cancer is becoming a disastrous threat to mankind. Therefore, an advanced analytical approach is desired as the need of the hour for early diagnosis to curb the menace of cancer. In this context, the present work reports the development of nano surface energy transfer (NSET) based fluorescent immunosensor for carcinoembryonic antigen (CEA) detection utilizing protein functionalized graphene quantum dots (anti-CEA/amine-GQDs) and a nanocomposite of nanostructured gold and reduced graphene oxide (AuNPs@rGO) as energy donor-acceptor pair, respectively. The obtained AuNPs@rGO nanocomposite has been characterized by different advanced analytical techniques. The functionality of the biosensor depends on quenching the fluorescence of anti-CEA/amine-GQDs donor species by AuNPs@rGO acceptor species, followed by the gradual recovery of GQDs' fluorescence after CEA addition. The efficient energy transfer kinetics have been envisaged by utilizing the AuNPs@rGO nanocomposite as a dual-quencher nanoprobe that revealed improved energy transfer and quenching efficiency (~62 %, 88 %) compared to AuNPs (~43 %, 81 %) as a single quencher. Further, the developed biosensing platform successfully detected CEA biomarker with notable biosensing parameters, including a wider linear detection range (0.001-500 ng mL^-1), fast response time (24 min), and a significantly low detection limit (0.35 pg mL^-1).

A highly selective optical sensor Eu-BINAM for assessment of high sensitivity cardiac troponin tumor marker in serum of cancer patients

A novel, easy, touchy and selective spectrofluorimetric technique has been successfully applied for sensitive determination of High Sensitivity Cardiac Troponin (TNHS I) in the serum samples of patients suffering malignant tumors through the usage of optical sensor Eu^3+-BINAM complex. The technique is primarily based on quenching of the Eu³⁺-BINAM complex's luminescence intensity upon introducing various concentrations of High Sensitivity Cardiac Troponin (TNHS I). The synthesis and characterization of the optical sensor was performed via absorption and emission. The sensor was also adapted to offer excitation at 394 nm in acetonitrile at pH 7.5. Concentration of High Sensitivity Cardiac Troponin (TNHS I) in serum samples was found to be proportional to the luminescence intensity quenching of the Eu³⁺-BINAM complex, most prominently at λ_em = 618 nm. The limit of the dynamic range is 4.26 × 10^-4 to 2 ng/mL. The limit of detection and quantitation were calculated to be 1.35 and 4.10 ng/mL, respectively. The suggested analytical approach proved its applicability, simplicity and comparatively interference- free. The technique was effectively recruited to quantify High Sensitivity Cardiac Troponin (TNHS I) in human serum samples. The proposed technique could be further extended to evaluate some biomarkers associated with malignancy related diseases in human.

One-Step Homogeneous Immunoassay for the Detection of Influenza Virus Using Switching Peptide and Graphene Quencher

One-step homogeneous immunoassay was developed for detecting influenza viruses A and B (Inf-A and Inf-B) using the switching peptide H2. As the fluorescence-labeled switching peptide dissociated from the binding pocket of detection antibodies, the fluorescence signal could be directly generated by the binding of Inf-A and Inf-B without washing (i.e., one-step immunoassay). For the one-step homogeneous immunoassay with detection antibodies in solution, graphene was labeled with the antibodies as a fluorescence quencher. To test the feasibility of the homogeneous one-step immunoassay, the stability of the antibody complex with the switching peptide was evaluated under different pH and salt conditions. The one-step homogeneous immunoassay with switching peptide was conducted using influenza virus antigens in phosphate-buffered saline and real samples with inactivated Inf-A and Inf-B spiked in serum. Finally, the one-step homogeneous immunoassay results were compared with those of commercially available lateral flow immunoassays.

Gold nanoparticle-based optical nanosensors for food and health safety monitoring: recent advances and future perspectives

Modern society has been facing serious health-related problems including food safety, diseases and illness. Hence, it is urgent to develop analysis methods for the detection and control of food contaminants, disease biomarkers and pathogens. As the traditional instrumental methods have several disadvantages, including being time consuming, and having high cost and laborious procedures, optical nanosensors have emerged as promising alternative or complementary approaches to those traditional ones. With the advantages of simple preparation, high surface-to-volume ratio, excellent biocompatibility, and especially, unique optical properties, gold nanoparticles (AuNPs) have been demonstrated as excellent transducers for optical sensing systems. Herein, we provide an overview of the synthesis of AuNPs and their excellent optical properties that are ideal for the development of optical nanosensors based on local surface plasmon resonance (LSPR), colorimetry, fluorescence resonance energy transfer (FRET), and surface-enhanced Raman scattering (SERS) phenomena. We also review the sensing strategies and their mechanisms, as well as summarizing the recent advances in the monitoring of food contaminants, disease biomarkers and pathogens using developed AuNP-based optical nanosensors in the past seven years (2015-now). Furthermore, trends and challenges in the application of these nanosensors in the determination of those analytes are discussed to suggest possible directions for future developments.

Split Locations and Secondary Structures of a DNAzyme Critical to Binding-Assembled Multicomponent Nucleic Acid Enzymes for Protein Detection

RNA-cleaving DNAzymes and their multicomponent nucleic acid enzymes (MNAzymes) have been successfully used to detect nucleic acids and proteins. The appropriate split of the catalytic cores of DNAzymes is critical to the formation of MNAzymes with high catalytic activities. However, for protein detection, no systematic investigation has been made on the effects of the split locations and secondary structures of MNAzymes on the catalytic activities of the cleavage reaction. We systematically studied how split locations and secondary structures affect the activity of the MNAzymes that catalyze multiple cleavage steps. We engineered the MNAzymes on the basis of the RNA-cleaving DNAzyme 10-23 as a model system. We designed 28 pairs of MNAzymes, representing 14 different split locations and two secondary structures: the three-arm and the four-arm structures. By comparing the multiple turnover numbers (k_obs.m) of the 28 MNAzymes, we showed that the split location between the seventh cytosine and the eighth thymine of the catalytic core region and the four-arm structure resulted in optimum catalytic activity. Binding-induced DNA assembly of the optimized MNAzymes enabled sensitive detection of two model protein targets, demonstrating promising potential of the binding-assembled MNAzymes for protein analysis. The strategy of binding-assembled MNAzymes and systematic studies measuring multiple turnover numbers (k_obs.m) provide a new approach to studying other partial (split) DNAzymes and engineering better MNAzymes for the detection of specific proteins.

Development of Liposome-Based Immunoassay for the Detection of Cardiac Troponin I

Cardiovascular diseases (CVDs) are one of the foremost causes of mortality in intensive care units worldwide. The development of a rapid method to quantify cardiac troponin I (cTnI)—the gold-standard biomarker of myocardial infarction (MI) (or “heart attack”)—becomes crucial in the early diagnosis and treatment of myocardial infarction (MI). This study investigates the development of an efficient fluorescent “sandwich” immunoassay using liposome-based fluorescent signal amplification and thereby enables the sensing and quantification of serum-cTnI at a concentration relevant to clinical settings. The calcein-loaded liposomes were utilized as fluorescent nano vehicles, and these have exhibited appropriate stability and efficient fluorescent properties. The standardized assay was sensitive and selective towards cTnI in both physiological buffer solutions and spiked human serum samples. The novel assay presented noble analytical results with sound dynamic linearity over a wide concentration range of 0 to 320 ng/mL and a detection limit of 6.5 ng/mL for cTnI in the spiked human serum.

Fluorescent Immunoassays for Detection and Quantification of Cardiac Troponin I: A Short Review

Cardiovascular diseases are considered one of the major causes of human death globally. Myocardial infarction (MI), characterized by a diminished flow of blood to the heart, presents the highest rate of morbidity and mortality among all other cardiovascular diseases. These fatal effects have triggered the need for early diagnosis of appropriate biomarkers so that countermeasures can be taken. Cardiac troponin, the central key element of muscle regulation and contraction, is the most specific biomarker for cardiac injury and is considered the “gold standard”. Due to its high specificity, the measurement of cardiac troponin levels has become the predominant indicator of MI. Various forms of diagnostic methods have been developed so far, including chemiluminescence, fluorescence immunoassay, enzyme-linked immunosorbent assay, surface plasmon resonance, electrical detection, and colorimetric protein assays. However, fluorescence-based immunoassays are considered fast, accurate and most sensitive of all in the determination of cardiac troponins post-MI. This review represents the strategies, methods and levels of detection involved in the reported fluorescence-based immunoassays for the detection of cardiac troponin I.

Sensitive Techniques for POCT Sensing on the Residues of Pesticides and Veterinary Drugs in Food

For the immense requirement on agriculture and animal husbandry, application of pesticides and veterinary drugs had become a normal state in the farming and ranching areas. However, to intently pursue the yields, large quantities of residues of pesticides and veterinary drugs have caused serious harm to both the environment and the food industry. To control and solve such an issue, a variety of novel techniques were developed in recent years. In this review, the development and features about point-of-care-testing (POCT) detection on the residues of pesticides and veterinary drugs, such as, electrochemistry (EC), enzyme-linked immunosorbent assay (ELISA) and nano-techniques, were systematically introduced. For each topic, we first interpreted the strategies and detailed account of such technical contributions on detection and assessment of the residues. Finally, the advantages and perspectives about mentioned techniques for ultrasensitive assessment and sensing on pesticides and veterinary drugs were summarized.

Nanomaterial-Based Dual-Emission Ratiometric Fluorescent Sensors for Biosensing and Cell Imaging

Owing to the unique optophysical properties of nanomaterials and their self-calibration characteristics, nanomaterial-based (e.g., polymer dots (Pdots) quantum dots (QDs), silicon nanorods (SiNRs), and gold nanoparticle (AuNPs), etc.) ratiometric fluorescent sensors play an essential role in numerous biosensing and cell imaging applications. The dual-emission ratiometric fluorescence technique has the function of effective internal referencing, thereby avoiding the influence of various analyte-independent confounding factors. The sensitivity and precision of the detection can therefore be greatly improved. In this review, the recent progress in nanomaterial-based dual-emission ratiometric fluorescent biosensors is systematically summarized. First, we introduce two general design approaches for dual-emission ratiometric fluorescent sensors, involving ratiometric fluorescence with changes of one response signal and two reversible signals. Then, some recent typical examples of nanomaterial-based dual-emission ratiometric fluorescent biosensors are illustrated in detail. Finally, probable challenges and future outlooks for dual-emission ratiometric fluorescent nanosensors for biosensing and cell imaging are rationally discussed.

Etching of AuNPs Through Superoxide Radical Dismutation by Cu-Zn Superoxide Dismutase Resulted in Remarkable Changes of its Localized Surface Plasmon Resonance

BACKGROUND

Superoxide dismutases (SODs) are categorized as antioxidant enzymes that are involved in many processes such as stress signalling responses and cell protection against free radical species. The primary function of SOD is the removal of produced radical species like superoxide ions in different physiological processes. There are various isozymes of SODs which are classified according to the metal cofactor in their active sites into four general types of Fe-SOD, Mn-SOD, Cu/Zn-SOD and Ni-SOD. Among metal nanoparticles, gold nanoparticles (AuNPs) are useful for biological purposes as sensing probe for determining critical analysis based on surface plasmon resonance and colorimetric method. In this study, the human Cu-Zn SOD expressed, purified, and its interaction with AuNPs based on a new colorimetric method was investigated.

OBJECTIVES

In this approach, a colorimetric detection method for SOD activity was developed based on the carboxylic stabilized AuNPs.

MATERIAL AND METHODS

The Ni-NTA Sepharose affinity column was performed for the purification process of enzyme. Following SOD purification, the enzyme activity in presence of AuNPs due to the possible etching in the presence of free radicals which are produced by riboflavin, methionine, Na₂CO₃ and potassium phosphate buffer, have been performed. In addition, Fluorescence spectroscopy analysis toward SOD and gold nanoparticle were performed.

RESULTS

Superoxide radicals generated from the enzymatic reaction would preferentially etch AuNPs and resulted in remarkable changes of localized surface plasmon resonance of AuNPs, which is reduced in the presence of SOD. Under the optimized experimental conditions assay (pH~7.8 and 25 ˚C), better selectivity and sensitivity toward SOD activity was shown.

CONCLUSIONS

In this context, an indirect new colorimetric method for determining of SOD activity based on gold nanoparticles (AuNPs) was evaluated. According to the presented result, it may be concluded that by scavenging of free superoxide radicals in the presence of SOD, the amount of AuNP absorbance can be replenished.

Wavelength-Selective Light-Controlled Stepwise Photolysis from Single Gold Nanoparticles

Light-controlled sequential photolysis from a single nanoparticle is a challenge for controlled release. A wavelength-selective sequential photolysis from single gold nanoparticles is reported for the first time. In particular, it is also demonstrated that such nanoparticle can be used to sequentially release two payloads in living cells. In principle, this system can be extended to sequential release of multiple different types of payloads by rational design of diverse photocleavable linkers. It is expected that this work can provide a new tool for better orderly controlling cellular events that request high spatiotemporal manners.

Recent Trends in Noble Metal Nanoparticles for Colorimetric Chemical Sensing and Micro-Electronic Packaging Applications

Noble metal NPs are highly attractive candidates because of their unique combination of physical, chemical, mechanical, and structural properties. A lot of developments in this area are still fascinating the materials research community, and are broadly categorized in various sectors such as chemical sensors, biosensors, Förster resonance energy transfer (FRET), and microelectronic applications. The related function and properties of the noble metals in these areas can be further tailored by tuning their chemical, optical, and electronic properties that are influenced by their size, shape, and distribution. The most widely used Au and Ag NPs in dispersed phase below 100 nm exhibit strong color change in the visible range which alters upon aggregation of the NPs. The chemical sensing of the analyte is influenced by these NPs aggregates. In this article, we have summarized the uniqueness of noble metal NPs, their synthesis methods, nucleation and growth process, and their important applications in chemical sensing, microelectronic packaging, and Förster resonance energy transfer.

An ultrasensitive, homogeneous fluorescence quenching immunoassay integrating separation and detection of aflatoxin M1 based on magnetic graphene composites

A homogeneous fluorescence quenching immunoassay is described for simultaneous separation and detection of aflatoxin M₁ (AFM₁) in milk. The novel assay relies on monoclonal antibody (mAb) functionalized Fe₃O₄ decorated reduced-graphene oxide (rGO-Fe₃O₄-mAb) as both capture probe and energy acceptor, combined with tetramethylrhodamine cadaverine-labeled aflatoxin B₁ (AFB₁-TRCA) as the energy donor. In the assay, AFB₁-TRCA binds to rGO-Fe₃O₄-mAb in the absence of AFM₁, quenching the fluorescence of TRCA by resonance energy transfer. Significantly, the immunoassay integrates sample preparation and detection into a single step, by using magnetic graphene composites to avoid washing and centrifugation steps, and the assay can be completed within 10 min. Under optimized conditions, the visual and quantitative detection limits of the assay for AFM₁ were 50 and 3.8 ng L^-1, respectively, which were significantly lower than those obtained by fluorescence polarization immunoassay using the same immunoreagents. Owing to its operation and highly sensitivity, the proposed assay provides a powerful tool for the detection of AFM₁.

Diagnosis and prognosis of myocardial infarction on a plasmonic chip

Cardiovascular diseases lead to 31.5% of deaths globally, and particularly myocardial infarction (MI) results in 7.4 million deaths per year. Diagnosis of MI and monitoring for prognostic use are critical for clinical management and biomedical research, which require advanced tools with accuracy and speed. Herein, we developed a plasmonic gold nano-island (pGold) chip assay for diagnosis and monitoring of MI. On-chip microarray analysis of serum biomarkers (e.g., cardiac troponin I) afforded up to 130-fold enhancement of near-infrared fluorescence for ultra-sensitive and quantitative detection within controlled periods, using 10 μL of serum only. The pGold chip assay achieved MI diagnostic sensitivity of 100% and specificity of 95.54%, superior to the standard chemiluminescence immunoassay in cardiovascular clinics. Further, we monitored biomarker concentrations regarding percutaneous coronary intervention for prognostic purpose. Our work demonstrated a designed approach using plasmonic materials for enhanced diagnosis and monitoring for prognostic use towards point-of-care testing.

Environmentally friendly Au@CNC hybrid systems as prospective humidity sensors

Cellulose nanocrystals are a “green” support for nanogold. Hybrid films quickly and autonomously respond to changes in humidity and can be used in sensing applications.

Strategies for Constructing Upconversion Luminescence Nanoprobes to Improve Signal Contrast

Lanthanide-doped upconversion nanoparticles (UCNPs) can convert two or more lower-energy near-infrared photons to a single photon with higher energy, which makes them particularly suitable for constructing nanoprobes with large imaging depth and minimal interference of autofluorescence and light scattering from biosamples. Furthermore, they feature excellent photostability, sharp and narrow emissions, and large anti-Stokes shift, which confer them the capability of long-period bioimaging and real-time tracking. In recent years, UCNPs-based nanoprobes (UC-nanoprobes) have been attracting increasing interest in biological and medical research. Signal contrast, the ratio of signal intensity after and before the reaction of the probe and target, is the determinant factor of the sensitivity of all reaction-based probes. This progress report presents the methods of constructing UC-nanoprobes, with a focus fixed on recent strategies to improve the signal contrast, which have kept on promoting the bioapplication of this type of probe.

Polyamine-Modified Gold Nanoparticles Readily Adsorb on Cell Membranes for Bioimaging

The surface modification of nanoparticles (NPs) can enhance cellular and intracellular targeting. A new type of polyamine-modified gold NPs (AuNPs) are designed and synthesized, which can be selectively absorbed onto the cell membrane. AuNPs with an average diameter of 4.0 nm were prepared and modified with polyamine (R-4C) through amidation. In order to detect the distribution of NPs within cells by fluorescence imaging, AuNP@MPA-R-4C was functionalized with fluorescein isothiocyanate (FITC). The fluorescence-labled NPs AuNP@MPA-R-4C-FITC demonstrated minimal cytotoxicity in several cell lines. Both confocal laser scanning microscopy and transmission electron microscopy demonstrated that AuNP@MPA-R-4C-FITC was distributed on the cell membrane. Compared with the free organic dye, the modified AuNPs showed significantly increased accumulation on the cell membrane after treatment for only 10 min. These results suggested that AuNP@MPA-R-4C-FITC can be used as a bioprobe targeting the cell membrane for various biological applications.

An electrochemical troponin T aptasensor based on the use of a macroporous gold nanostructure

A specific troponin T (TnT) binding aptamer was identified and immobilized on an electrodeposited macroporous gold nanostructure using poly(ethylene glycol) 600, to fabricate a novel and ultrasensitive TnT aptasensor. The transducer surface on the gold disk electrode was characterized by field emission scanning electron microscopy, and immobilization of the aptamer was monitored by open circuit potential measurements. Binding of TnT by the aptamer was monitored by differential pulse voltammetry using ferro/ferricyanide as the redox probe. The aptamer has a high affinity and specificity, and the electrode is sensitive and selective. Best operated at a working potential of 0.23 V (vs. Ag/AgCl), the electrode can detected TnT in the 0.05 to 5.0 ng mL^-1 concentration range with a 23 pg mL^-1 detection limit. The method was applied to the determination of TnT in 99 spiked human serum samples, and the diagnostic sensitivity and specificity were 94 and 95%, respectively. Graphical abstract Schematic presentation of an electrochemical troponin T aptasensor. A macroporous gold nanostructure was electrodeposited followed by immobilization of a specific TnT aptamer. Binding of TnT by the aptamer was electrochemically monitored. MCH: mercaptohexanol; TnT: troponin T.

Highly chemiluminescent TiO2/tetra(4-carboxyphenyl)porphyrin/N-(4-aminobutyl)-N-ethylisoluminol nanoluminophores for detection of heart disease biomarker copeptin based on chemiluminescence resonance energy transfer

In this work, the chemiluminescence (CL) property of 5,10,15,20-tetrakis(4-carboxyphenyl)-porphyrin- and N-(4-aminobutyl)-N-ethylisoluminol-functionalized TiO₂ nanoparticles (TiO₂-TCPP-ABEI nanoluminophores) was studied for the first time. It was found that TiO₂-TCPP-ABEI nanoluminophores exhibited excellent CL activity in the presence of H₂O₂. The CL mechanism has been proposed due to the reaction of ABEI with H₂O₂ and catalytic effect of TiO₂ and TCPP. Furthermore, trisodium citrate-stabilized gold nanoparticles were observed to effectively quench the CL of TiO₂-TCPP-ABEI due to CL resonance energy transfer (CRET). On this basis, a sensitive and selective CRET-based immunoassay was developed for the determination of copeptin by using TiO₂-TCPP-ABEI nanoluminophores as both CL nanointerface and energy donor, and using cit-AuNPs as an effective energy receptor. The immunoassay exhibited a wide dynamic range from 5 × 10^-12 to 1 × 10^-9 g mL^-1 with a low detection limit of 1.54 × 10^-12 g mL^-1, which was superior to previously reported CL-based immunoassays. It was successfully applied for the determination of copeptin in serum samples, which would provide a good practical perspective on the clinical diagnosis. This strategy may also be used for the detection of other antigens if corresponding antibodies are available. Graphical abstract.

A review on nanomaterial-based electrochemical, optical, photoacoustic and magnetoelastic methods for determination of uranyl cation

This review (with 177 refs) gives an overview on nanomaterial-based methods for the determination of uranyl ion (UO₂²⁺) by different types of transducers. Following an introduction into the field, a first large section covers the fundamentals of selective recognition of uranyl ion by receptors such as antibodies, aptamers, DNAzymes, peptides, microorganisms, organic ionophores (such as salophens, catechols, phenanthrolines, annulenes, benzo-substituted macrocyclic diamides, organophosphorus receptors, calixarenes, crown ethers, cryptands and β-diketones), by ion imprinted polymers, and by functionalized nanomaterials. A second large section covers the various kinds of nanomaterials (NMs) used, specifically on NMs for electrochemical signal amplification, on NMs acting as signal tags or carriers for signal tags, on fluorescent NMs, on NMs for colorimetric assays, on light scattering NMs, on NMs for surface enhanced Raman scattering (SERS)-based assays and wireless magnetoelastic detection systems. We then discuss detection strategies, with subsections on electrochemical methods (including ion-selective and potentiometric systems, voltammetric systems and impedimetric systems). Further sections treat colorimetric, fluorometric, resonance light scattering-based, SERS-based and photoacoustic methods, and wireless magnetoelastic detection. The current state of the art is summarized, and current challenges are discussed at the end. Graphical abstract An overview is given on nanomaterial-based methods for the detection of uranyl ion by different types of transducers (such as electrochemical, optical, photoacoustic, magnetoelastic, etc) along with a critical discussion of their limitations, benefits and application to real samples.

Flexible electrical aptasensor using dielectrophoretic assembly of graphene oxide and its subsequent reduction for cardiac biomarker detection

Cardiac troponin T (cTnT) is considered a clinical standard for its high specificity and sensitivity when diagnosing acute myocardial infarction; however, most studies on the electrical sensors of cardiac troponin biomarkers have focused on cTnI rather than cTnT. This study presents label-free, low-cost, transparent, and flexible aptamer-based immunosensors for the electrical detection of cTnT using reduced graphene oxide (rGO) sheets. GO was first deposited by AC dielectrophoresis between two predefined source and drain electrodes on a 3-aminopropyltriethoxylsilane-modified polyethylene terephthalate substrate. The GO was then reduced using hydrazine vapour without damaging the substrate, resulting in uniform, controlled, and stable deposition of rGO sheets, and demonstrating more stability than those directly deposited by dielectrophoresis. Amine-modified single-strand DNA aptamers against cTnT were immobilized onto the rGO channels. The relative resistance change of this sensor owing to the attachment of cTnT was quantified as the cTnT concentration decreased from 10 ng/mL to 1 pg/mL in phosphate buffered saline (PBS) and 10-fold diluted human serum in PBS, with the limits of detection being 1.2 pg/mL and 1.7 pg/mL, respectively, which is sufficiently sensitive for clinical applications. High-yield and rapid fabrication of the present rGO sensors will have significant influences on scaled-up fabrication of graphene-based sensors.

Application of Förster Resonance Energy Transfer (FRET) technique to elucidate intracellular and In Vivo biofate of nanomedicines

Extensive studies on nanomedicines have been conducted for drug delivery and disease diagnosis (especially for cancer therapy). However, the intracellular and in vivo biofate of nanomedicines, which is significantly associated with their clinical therapeutic effect, is poorly understood at present. This is because of the technical challenges to quantify the disassembly and behaviour of nanomedicines. As a fluorescence- and distance-based approach, the Förster Resonance Energy Transfer (FRET) technique is very successful to study the interaction of nanomedicines with biological systems. In this review, principles on how to select a FRET pair and construct FRET-based nanomedicines have been described first, followed by their application to study structural integrity, biodistribution, disassembly kinetics, and elimination of nanomedicines at intracellular and in vivo levels, especially with drug nanocarriers including polymeric micelles, polymeric nanoparticles, and lipid-based nanoparticles. FRET is a powerful tool to reveal changes and interaction of nanoparticles after delivery, which will be very useful to guide future developments of nanomedicine.

Rapid and sensitive detection of the activity of ADAM17 using a graphene oxide-based fluorescence sensor

A disintegrin and metalloproteinase 17 (ADAM17) has become a novel biomarker and potential therapeutic target for the early detection and treatment of human cancers. In this work, by covalently attaching fluorescently labeled ADAM17 substrate peptide (Pep-FAM) molecules to carboxylated graphene oxide (cGO) and monitoring the cleavage of the peptide substrate by ADAM17, we developed a cGO-Pep-FAM fluorescence sensor for the rapid, sensitive and accurate detection of ADAM17. The sensor was highly sensitive with a detection limit of 17.5 picomolar. Furthermore, the sensor was selective: structure similar proteases such as ADAM9 and MMP-9 would not interfere with ADAM17 detection. In addition, simulated serum samples were successfully analyzed. Our developed cGO-Pep-FAM sensing strategy should find useful applications in disease diagnosis and drug screening.

Fluorescent Sensors for the Detection of Heavy Metal Ions in Aqueous Media

Due to the risks that water contamination implies for human health and environmental protection, monitoring the quality of water is a major concern of the present era. Therefore, in recent years several efforts have been dedicated to the development of fast, sensitive, and selective sensors for the detection of heavy metal ions. In particular, fluorescent sensors have gained in popularity due to their interesting features, such as high specificity, sensitivity, and reversibility. Thus, this review is devoted to the recent advances in fluorescent sensors for the monitoring of these contaminants, and special focus is placed on those devices based on fluorescent aptasensors, quantum dots, and organic dyes.

A glass fibre membrane platform for ultra-sensitive detection of cardiac troponin T

A glass fibre membrane platform that allows quantification of circulating cTnT with a LoD of 0.87 pg mL^-1 is described. The proposed platform uses a glass fibre membrane, DNA-guided detection method, and antibody-conjugated fluorescent beads for the quantification of cTnT in the analytical detection range of 1-120 pg mL^-1 at room temperature in 30 min. Glass fibre membranes were chemically modified to immobilize the oligonucleotide probes that catch a biomolecular complex (FB-dAB-cTnT-cAB-DNA) containing complementary oligonucleotides. There were no interferences from human cTnI, cTnC, skTnT, biotin, and hemoglobin (each 1 μg mL^-1). The linearity in the serial dilution test of plasma samples indicates that this platform is highly applicable for regular health check-up to assess the risk of AMI and HF.

Applications of Gold Nanoparticles in Non-Optical Biosensors

Due to their unique properties, such as good biocompatibility, excellent conductivity, effective catalysis, high density, and high surface-to-volume ratio, gold nanoparticles (AuNPs) are widely used in the field of bioassay. Mainly, AuNPs used in optical biosensors have been described in some reviews. In this review, we highlight recent advances in AuNP-based non-optical bioassays, including piezoelectric biosensor, electrochemical biosensor, and inductively coupled plasma mass spectrometry (ICP-MS) bio-detection. Some representative examples are presented to illustrate the effect of AuNPs in non-optical bioassay and the mechanisms of AuNPs in improving detection performances are described. Finally, the review summarizes the future prospects of AuNPs in non-optical biosensors.

A FRET immunosensor for sensitive detection of CA 15-3 tumor marker in human serum sample and breast cancer cells using antibody functionalized luminescent carbon-dots and AuNPs-dendrimer aptamer as donor-acceptor pair

We proposed a FRET immunosensing for detection of CA15-3 tumor marker by highly biospecific interactions between CA 15-3 antigen and the corresponding antibody and aptamer. In this sandwich type immunoassay, CA15-3 antibody-functionalized carbon dots and AuNPs labeled PAMAM-Dendrimer/aptamer were used as donor/acceptor, respectively. When CA 15-3 Ag was added to homogenous immunoassay, the strong complex interaction between CA15-3 Ab-CA15-3 Ag- aptamer caused in more coming closer carbon dot and AuNPs and more decreasing fluorescence signal. The decreased fluorescence intensity was linear at three ranges including in concentration range 1.1 μUmL^-1 to 16 μU mL^-1 with regression of R² = 0.9879, at the concentration range 16 μU mL^-1 to 0.163 mU mL^-1 with regression of R² = 0.9944 and at the concentration range 0.163 mU mL^-1 to 5.0 mU mL^-1 with regression of R² = 0.9805. The detection limit of the FRET immunoassay was 0.9 μU mL^-1. This assay revealed good sensitivity and specificity with MDA-MB-231 breast cancer cells concentrations from 1000 to 40000 cells/mL with correlation coefficient of 0.9955 and detection limit of 300 cells/mL (3 cells in 10 μL of injected sample). In addition, this FRET immunosensing is applicable in diluted human serum. The recovery values were in the range of 95.86-96.97% for CA 15-3 Ag in spiked serum sample with RSD lower than 7.3%. The proposed immunoassay could be a valid model for establishing other immunoassays for detection of different cancer tumor markers with relevant antigens and antibodies.

Chemical and Biological Sensing Using Hybridization Chain Reaction

Since the advent of its theoretical discovery more than 30 years ago, DNA nanotechnology has been used in a plethora of diverse applications in both the fundamental and applied sciences. The recent prominence of DNA-based technologies in the scientific community is largely due to the programmable features stored in its nucleobase composition and sequence, which allow it to assemble into highly advanced structures. DNA nanoassemblies are also highly controllable due to the precision of natural and artificial base-pairing, which can be manipulated by pH, temperature, metal ions, and solvent types. This programmability and molecular-level control have allowed scientists to create and utilize DNA nanostructures in one, two, and three dimensions (1D, 2D, and 3D). Initially, these 2D and 3D DNA lattices and shapes attracted a broad scientific audience because they are fundamentally captivating and structurally elegant; however, transforming these conceptual architectural blueprints into functional materials is essential for further advancements in the DNA nanotechnology field. Herein, the chemical and biological sensing applications of a 1D DNA self-assembly process known as hybridization chain reaction (HCR) are reviewed. HCR is a one-dimensional (1D) double stranded (ds) DNA assembly process initiated only in the presence of a specific short ssDNA (initiator) and two kinetically trapped DNA hairpin structures. HCR is considered an enzyme-free isothermal amplification process, which shows substantial promise and offers a wide range of applications for in situ chemical and biological sensing. Due to its modular nature, HCR can be programmed to activate only in the presence of highly specific biological and/or chemical stimuli. HCR can also be combined with different types of molecular reporters and detection approaches for various analytical readouts. While the long dsDNA HCR product may not be as structurally attractive as the 2D and 3D DNA networks, HCR is highly instrumental for applied biological, chemical, and environmental sciences, and has therefore been studied to foster a variety of objectives. In this review, we have focused on nucleic acid, protein, metabolite, and heavy metal ion detection using this 1D DNA nanotechnology via fluorescence, electrochemical, and nanoparticle-based methodologies.

Recent advances in ambient mass spectrometry of trace explosives

Ambient mass spectrometry has evolved rapidly over the past decade, yielding a plethora of platforms and demonstrating scientific advancements across a range of fields from biological imaging to rapid quality control. These techniques have enabled real-time detection of target analytes in an open environment with no sample preparation and can be coupled to any mass analyzer with an atmospheric pressure interface; capabilities of clear interest to the defense, customs and border control, transportation security, and forensic science communities. This review aims to showcase and critically discuss advances in ambient mass spectrometry for the trace detection of explosives.

Enzyme-Free Immunoassay Using Silver Nanoparticles for Detection of Gliadin at Ultralow Concentrations

Determination of biomarkers in clinical or food samples is of crucial importance for monitoring, prevention, and care of public health. The standard procedure used for this purpose is the enzyme-linked immunosorbent assay (ELISA), which makes use of the specific antibody-antigen biorecognition and the catalytic effect of the enzymes. One of the main shortcomings of this technique is the use of enzymes that often present low chemical and thermal stabilities compared to other chemicals. Other drawbacks include the nonspecific binding process that could lead to false-positive results, the use of relatively large amounts of the sample, and the number of time-consuming steps involved. Recently, an enzyme-free and ultrasensitive analytical method for antigen detection denoted as intensity depletion immunolinked assay (IDILA) has been proposed by our laboratory. The assay is based on the inhibition to form Ag nanosphere dimers linked by a specific antibody in the presence of the corresponding antigen. In this work, we go a step further demonstrating how the performance of this method could be improved by using silver nanoparticles (Ag NPs) of different diameters (58 and 78 nm). The experiments are performed for detecting gliadin, an antigen of utmost importance in celiac disease, and the results are compared with ELISA, the standard technique homologated by the Food Codex Alimentarius. It is found that the IDILA assay could be around 1000 or 10 000 times more sensitive than ELISA, also having lower limits of detection, depending on the conditions explored (fraction of dimers and Ag NP diameter). Using the appropriate conditions, the IDILA assay is shown to be able to detect femtomolar concentrations of the antigen, besides being robust, reliable, cheap, rapid (around 2 h), and of easy implementation using the standard equipment and biomolecular reagents used for the ELISA assay.

A gold nanoparticle-based four-color proximity immunoassay for one-step, multiplexed detection of protein biomarkers using ribonuclease H signal amplification

A gold nanoparticle-based four-color fluorescence proximity immunoassay was developed for multiplexed analysis of protein biomarkers using ribonuclease H signal amplification.

State of diagnosing infectious pathogens using colloidal nanomaterials

Infectious diseases are a major global threat that accounts for one of the leading causes of global mortality and morbidity. Prompt diagnosis is a crucial first step in the management of infectious threats, which aims to quarantine infected patients to avoid contacts with healthy individuals and deliver effective treatments prior to further spread of diseases. This review article discusses current advances of diagnostic systems using colloidal nanomaterials (e.g., gold nanoparticles, quantum dots, magnetic nanoparticles) for identifying and differentiating infectious pathogens. The challenges involved in the clinical translation of these emerging nanotechnology based diagnostic devices will also be discussed.

Surface Plasmon Resonance or Biocompatibility-Key Properties for Determining the Applicability of Noble Metal Nanoparticles

Metal and in particular noble metal nanoparticles represent a very special class of materials which can be applied as prepared or as composite materials. In most of the cases, two main properties are exploited in a vast number of publications: biocompatibility and surface plasmon resonance (SPR). For instance, these two important properties are exploitable in plasmonic diagnostics, bioactive glasses/glass ceramics and catalysis. The most frequently applied noble metal nanoparticle that is universally applicable in all the previously mentioned research areas is gold, although in the case of bioactive glasses/glass ceramics, silver and copper nanoparticles are more frequently applied. The composite partners/supports/matrix/scaffolds for these nanoparticles can vary depending on the chosen application (biopolymers, semiconductor-based composites: TiO₂, WO₃, Bi₂WO₆, biomaterials: SiO₂ or P₂O₅-based glasses and glass ceramics, polymers: polyvinyl alcohol (PVA), Gelatin, polyethylene glycol (PEG), polylactic acid (PLA), etc.). The scientific works on these materials' applicability and the development of new approaches will be targeted in the present review, focusing in several cases on the functioning mechanism and on the role of the noble metal.

Single-Molecule Detection of Polynucleotide Kinase Based on Phosphorylation-Directed Recovery of Fluorescence Quenched by Au Nanoparticles

5'-Polynucleotide kinase such as T4 polynucleotide kinase (T4 PNK) may catalyze the phosphorylation of 5'-hydroxyl termini in nucleic acids, playing a crucial role in DNA replication, DNA recombination, and DNA damage repair. Here, we demonstrate for the first time single-molecule detection of PNK based on phosphorylation-directed recovery of fluorescence quenched by Au nanoparticle (AuNP) in combination with lambda exonuclease-mediated cleavage reaction. In the presence of PNK, the γ-phosphate group from adenosine triphosphate (ATP) is transferred to 5'-hydroxyl terminus, resulting in 5'-phosphorylation of the hairpin probe. The phosphorylated hairpin probes may function as the substrates of lambda exonuclease and enable the removal of 5' mononucleotides from the stem, leading to the unfolding of hairpin structure and the formation of binding probes. The resultant binding probes may specifically hybridize with the AuNP-modified capture probes, forming double-strand DNA (dsDNA) duplexes with 5'-phosphate groups as the substrates of lambda exonuclease and subsequently leading to the cleavage of capture probes and the liberation of Cy5 molecules and the binding probes. The released binding probes may further hybridize with new capture probes, inducing cycles of digestion-release-hybridization and consequently the release of numerous Cy5 molecules. Through simply monitoring Cy5 molecules with total internal reflection fluorescence (TIRF)-based imaging, PNK activity can be quantitatively measured. This assay is very sensitive with a limit of detection of 9.77 × 10^-8 U/μL, and it may be further used to screen the PNK inhibitors and measure PNK in cancer cell extracts.

Novel Pyrimidine Tagged Silver Nanoparticle Based Fluorescent Immunoassay for the Detection of Pseudomonas aeruginosa

A simple pyrimidine-based fluorescent probe (R)-4-(anthracen-9-yl)-6- (naphthalen-1-yl)-1,6-dihydropyrimidine-2-amine (ANDPA) was synthesized through the greener one pot reaction and characterized by IR, NMR, and ESI-Mass. Glucose stabilized silver nanoparticles (Glu-AgNPs) were also synthesized and characterized using UV, IR, XRD, SEM, and TEM. When ANDPA was tagged with Glu-AgNPs, the fluorescent intensity of ANDPA decreased drastically. When the monoclonal antibody (Ab) [immunoglobulin G (IgG)] of Pseudomonas aeruginosa (PA) was attached with ANDPA/Glu-AgNPs, the original intensity of the probe was recovered with minimal enhancement at 446 nm. On further attachment of PA with ANDPA/Glu-AgNPs/PA, the fluorescence intensity of the probe was enhanced obviously at 446 nm with red shift. This phenomenon was further supported by SEM and TEM. The linear range of detection is from 8 to 10^-1 CFU/mL, and LOD is 1.5 CFU/mL. The immunosensor was successfully demonstrated to detect Pseudomonas aeruginosa in water, soil, and food products like milk, sugar cane, and orange juices.