Luminescent lanthanide-functionalized gold nanoparticles: exploiting the interaction with bovine serum albumin for potential sensing applications

Dual Optical Response Strategy for the Detection of Cytochrome c Using Highly Luminescent Lanthanide-Based Nanotubular Sensor Arrays

Here, we demonstrate a label-free dual optical response strategy for the detection of cytochrome c (Cyt c) with ultrahigh sensitivity using highly luminescent lanthanides containing inorganic-organic hybrid nanotubular sensor arrays. These sensor arrays are formed by the sequential incorporation of the photosensitizers 2,3-dihydroxynaphthalene (DHN) or 1,10-phenanthroline (Phen), and trivalent lanthanide terbium ions (Tb3+) into sodium lithocholate (NaLC) nanotube templates. Our sensing platform relies on the detection and quantification of Cyt c in solution by providing dual photoluminescence quenching responses from the nanotubular hybrid arrays in the presence of Cyt c. The large quenching of the sensitized Tb3+ emission within the DHN/Phen-Tb3+-NaLC nanotubular sensor arrays caused by the strong binding of the photosensitizers to Cyt c provides an important signal response for the selective detection of Cyt c. This long-lived lanthanide emission response-based sensing strategy can be highly advantageous for the detection of Cyt c in a cellular environment eliminating background fluorescence and scattering signals through time-gated measurements. The DHN containing nanotubular sensor arrays (DHN-NaLC and DHN-Tb3+-NaLC) provide an additional quenching response characterized by a unique spectral valley splitting with quantized quenching dip on the DHN fluorescence emission. This spectral quenching dip resulting from efficient FRET between the protein bound DHN photosensitizer and the heme group of Cyt c serves as an important means for specific detection and quantification of Cyt c in the concentration range of 0-30 μM with a low detection limit of around 20 nM.

Construction of Multifunctional Luminescent Lanthanide MOFs for Luminescent Sensing of Temperature, Trifluoroacetic Acid Vapor and Explosives

Metal-organic frameworks (MOFs) with multifunctional and tunable optical properties have unique advantages in the field of sensing, and the structure and properties of MOFs are significantly influenced by the ligands. In this study, a Y-type tricarboxylic acid ligand containing amide bonds was synthesized through functional guidance, and three isomorphic and heterogeneous three-dimensional MOFs (Eu-MOF, Tb-MOF, and Gd-MOF) were obtained by solvothermal reaction. Further studies revealed that both the Tb-MOF and Eu-MOF could selectively detect picric acid (PA). The luminescence quenching of the two MOFs by PA was attributed to competing absorption and photoelectron energy transfer mechanisms. In addition, due to the energy transfer between Tb and Rhodamine B, Rhodamine B was encapsulated into Tb-MOF. The obtained material exhibited a linear relationship between the temperature parameters I544/I584 and temperature within the range of 280-400 K, the correlation coefficient (R2) reached an impressive value of 0.999, and the absolute sensitivity of the sample used for temperature sensing was 1.534% K-1. What is more, the material exhibited a good response to trifluoroacetic acid vapor, which suggests the potential of the material for temperature sensing and detection of trifluoroacetic acid vapor. The designed and investigated strategy can also serve as a reference for further research on excellent multifunctional sensors.

Intercalative binding of two new five-coordinated anticancer Pt(II) complexes to DNA: experimental and computational approaches

Binding interaction of two organoplatinum complexes, [Pt(C^N)Cl(dppa)], 1, and [Pt(C^N)Cl(dppm)], 2, (C^N = N(1), C(2')-chelated, deprotonated 2-phenylpyridine, dppa = bis(diphenylphosphino)amine, dppm = bis(diphenylphosphino)methane), as anti-tumor agents, with calf thymus DNA (CT-DNA) under pseudo-physiological conditions has been investigated using various biophysical techniques viz., UV-Vis and fluorescence spectroscopies, viscosity measurements, and thermal denaturation experiments. A hypochromic shift in UV-Vis absorption titration, fluorescence enhancement of Pt(II) complexes in the presence of CT-DNA, fluorescence quenching in competitive ethidium bromide displacement assay, and an uptrend in the viscosity (η) and melting temperature (Tm) indicated the existence of a tight intercalative interaction of Pt(II) complexes with CT-DNA. The fluorescence quenching of CT-DNA was a combined quenching of static and dynamic with Stern-Volmer quenching constants of 7.520 × 103 M-1 for complex 1 and 5.183 × 103 M-1 for complex 2, at low concentrations of Pt(II) complexes. Besides the experimental studies, computational studies were done. Molecular modeling studies confirmed the intercalation of the studied complexes by the phenyl groups of dppa and dppm, leading to π-π interactions but with a certain steric hindrance because of the size and shape of the considered complexes. The combination of experimental and computational data showed that reported Pt(II) complexes are promising structures and could be developed for cancer therapeutic applications.Communicated by Ramaswamy H. Sarma.

N-Heterocyclic Carbene Boranes: Dual Reagents for the Synthesis of Gold Nanoparticles

N-Heterocyclic carbenes (NHCs) have drawn considerable interest in the field of nanomaterials chemistry as highly stabilizing ligands enabling the formation of strong and covalent carbon-metal bonds. Applied to gold nanoparticles synthesis, the most common strategy consists of the reduction of a preformed NHC-AuI complex with a large excess of a reducing agent that makes the particle size difficult to control. In this paper, we report the straightforward synthesis of NHC-coated gold nanoparticles (NHC-AuNPs) by treating a commercially available gold(I) precursor with an easy-to-synthesize NHC-BH3 reagent. The latter acts as both the reducing agent and the source of surface ligands operating under mild conditions. Mechanistic studies including NMR spectroscopy and mass spectrometry demonstrate that the reduction of gold(I) generates NHC-BH2 Cl as a by-product. This strategy gives efficient control over the nucleation and growth of gold particles by varying the NHC-borane/gold(I) ratio, allowing unparalleled particle size variation over the range of 4.9±0.9 to 10.0±2.7 nm. Our strategy also allows an unprecedented precise and controlled seeded growth of gold nanoparticles. In addition, the as-prepared NHC-AuNPs exhibit narrow size distributions without the need for extensive purification or size-selectivity techniques, and are stable over months.

Dye-sensitized lanthanide containing nanoparticles for luminescence based applications

Due to their exceptional luminescent properties, lanthanide (Ln) complexes represent a unique palette of probes in the spectroscopic toolkit. Their extremely weak brightness due to forbidden Ln electronic transitions can be overcome by indirect dye-sensitization from the antenna effect brought by organic ligands. Despite the improvement brought by the antenna effect, (bio)analytical applications with discrete Ln complexes as luminescent markers still suffers from low sensitivity as they are limited by the complex brightness. Thus, there is a need to develop nano-objects that cumulate the spectroscopic properties of multiple Ln ions. This review firstly gives a brief introduction of the spectral properties of lanthanides both in complexes and in nanoparticles (NPs). Then, the research progress of the design of Ln-doped inorganic NPs with capping antennas, Ln-complex encapsulated NPs and Ln-complex surface functionalized NPs is presented along with a summary of the various photosensitizing ligands and of the spectroscopic properties (excited-state lifetime, brightness, quantum yield). The review also emphasizes the problems and limitations encountered over the years and the solutions provided to address them. Finally, a comparison of the advantages and drawbacks of the three types of NP is provided as well as a conclusion about the remaining challenges both in the design of brighter NPs and in the luminescence based applications.

Perovskite Nanoparticles as an Electrochemical Sensing Platform for Detection of Warfarin

Chemically prepared PrAlO3 perovskite nanoparticles (NPs) were applied for the electrochemical detection of warfarin, which is commonly utilized for preventing blood clots, such as in deep vein thrombosis. PrAlO3 perovskite NPs were synthesized by the co-precipitation process at environmental conditions. Crystallographic structure, phase purity, morphological structure, thermal stability, optical properties, and electrochemical characteristics were investigated by X-ray diffraction (XRD), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), Fourier transform infrared (FTIR) spectroscopy, UV-visible analysis, and cyclic voltammetry techniques. TEM micrographs showed the highly crystalline structure, smooth surface, irregular shape, and size of nanocrystalline particles with an average size of 20–30 nm. Particularly crystalline perovskite NPs were pasted on glassy carbon electrodes (GCE) to electrochemically detect the warfarin contents in liquid samples. The fabricated electrode was electrochemically characterized by different parameters such as different potential, scan rates, same potential with seven consecutive cycles, time response, real-time sample analysis, and as a function of warfarin concentration in phosphate buffer solution (0.1 M PBS, pH 7.2). The electrochemical electrode was further verified with various potentials of 5, 10, 20, 50, 100, and 150 mV/s, which exhibited sequential enhancements in the potential range. For detecting warfarin over a wide concentration range (19.5 µM–5000 µM), the detection devices offered good sensitivity and a low limit of detection (19.5 µM). The time-dependent influence was examined using chronoamperometry (perovskite NPs/GCE) in the absence and presence of warfarin at four distinct voltages of +0.05 to +1.2 V from 0 to 1000 s. The repeatability and reliability of the constructed electrochemical sensing electrode were also evaluated in terms of cyclic response for 30 days, demonstrating that it is substantially more reliable for a longer period. The fabricated perovskite NPs/GCE electrodes could be employed for the rapid identification of other drugs.

Monitoring the Viral Transmission of SARS-CoV-2 in Still Waterbodies Using a Lanthanide-Doped Carbon Nanoparticle-Based Sensor Array

The latest epidemic of extremely infectious coronavirus disease 2019 (COVID-19) has created a significant public health concern. Despite substantial efforts to contain severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) within a specific location, shortcomings in the surveillance of predominantly asymptomatic infections constrain attempts to identify the epidemiological spread of the virus. Continuous surveillance of wastewater streams, including sewage, offers opportunities to track the spread of SARS-CoV-2, which is believed to be found in fecal waste. To demonstrate the feasibility of SARS-CoV-2 detection in wastewater systems, we herein present a novel facilely constructed fluorescence sensing array based on a panel of three different lanthanide-doped carbon nanoparticles (LnCNPs). The differential fluorescence response pattern due to the counterion-ligand interactions allowed us to employ powerful pattern recognition to effectively detect SARS-CoV-2 and differentiate it from other viruses or bacteria. The sensor results were benchmarked to the gold standard RT-qPCR, and the sensor showed excellent sensitivity (1.5 copies/μL) and a short sample-to-results time of 15 min. This differential response of the sensor array was also explained from the differential mode of binding of the LnCNPs with the surface proteins of the studied bacteria and viruses. Therefore, the developed sensor array provides a cost-effective, community diagnostic tool that could be potentially used as a novel epidemiologic surveillance approach to mitigate the spread of COVID-19.

An emissive dual-sensitized bimetallic Eu2III-bioprobe: design strategy, biological interactions, and nucleolus staining studies

A dual sensitized Eu2III–bioprobe (1) offers incredible opportunities for fine-tuning and exploring a strongly luminescent probe as a nucleolus staining agent.

Highlights of the development and application of luminescent lanthanide based coordination polymers, MOFs and functional nanomaterials

The development of lanthanide based coordination polymer and metal-organic framework (CPs and MOFs) nanomaterials as novel functional (e.g. luminescent and magnetic) materials has attracted significant attention in recent times. This is in part due to the wide, but yet unique coordination requirements that the f-metal ions possess, as well as their attractive physical properties, which are often transferred to the bulk material. Hence, there is no surprise, that the design, synthesis and characterisation of lanthanide based CP/MOF materials (featuring either 'pure' lanthanides, or a mixture of both f- and d-metal ions) for applications in gas and small molecule absorption, storage, conversion/catalysis, chemical sensing, bio-imaging, drug delivery, etc. has been a prominent feature in the scientific literature. In this review, we give a selected overview of some of the recent developments in the area of Ln CP/MOF based nanomaterials for sensing, optical materials and bio-medicine research, as well as making reference to some more established examples, with the view of introducing, particularly to new researchers to the field, the powerful and attractive features of lanthanide based materials.

Green light-emitting BSA-conjugated dye supported silica nanoparticles for bio-imaging applications

BSA conjugated with amine functionalised silica nanoparticles (BSA@DSFN) proved to be an ideal material for long life fluorescent probe for cellular imaging application.

When rare earth meets carbon nanodots: mechanisms, applications and outlook

Rare earth (RE) elements are widely used in the luminescence and magnetic fields by virtue of their abundant 4f electron configurations. However, the overall performance and aqueous stability of single-component RE materials need to be urgently improved to satisfy the requirements for multifunctional applications. Carbon nanodots (CNDs) are excellent nanocarriers with abundant functional surface groups, excellent hydrophilicity, unique photoluminescence (PL) and tunable features. Accordingly, RE-CND hybrids combine the merits of both RE and CNDs, which dramatically enhance their overall properties such as luminescent and magnetic-optical imaging performances, leading to highly promising practical applications in the future. Nevertheless, a comprehensive review focusing on the introduction and in-depth understanding of RE-CND hybrid materials has not been reported to date. This review endeavors to summarize the recent advances of RE-CNDs, including their interaction mechanisms, general synthetic strategies and applications in fluorescence, biosensing and multi-modal biomedical imaging. Finally, we present the current challenges and the possible application perspectives of newly developed RE-CND materials. We hope this review will inspire new design ideas and valuable references in this promising field in the future.

Functionalisation of gold nanoparticles with ruthenium(II) polypyridyl complexes for their application in cellular imaging

Two new dinuclear Ru(ii) polypyridyl complexes containing an alkyl disulphide functionalised bipyridine-based ligand and either 1,10-phenanthroline (phen) or 1,4,5,8-tetraazaphenanthrene (TAP) as ancillary ligands have been synthesised and characterised. Their attachment onto the surface of gold nanoparticles (AuNPs, average diameter of ca. 2.5 nm) resulted in the formation of two new water-soluble Ru(ii)-AuNP conjugates that combine the advantageous properties of both moieties. Both free complexes show the attractive photophysical properties of Ru(ii) polypyridyl complexes and a rapid cellular uptake in HeLa cervical cancer cells. However, their corresponding gold conjugates displayed lower quantum yields than those determined for the free complexes presumed to be due to an energy transfer quenching of the Ru(ii) luminescence by interaction with the gold surface. Despite their diminished luminescence, confocal fluorescence microscopy studies revealed that the Ru(ii)-AuNP conjugates are successfully internalised into HeLa cells and better tolerated than their free complex counterparts after 24 h incubation, which makes them potential luminescent nanomaterials for bioimaging applications.

Effect of the Heteroaromatic Antenna on the Binding of Chiral Eu(III) Complexes to Bovine Serum Albumin

The cationic enantiopure (R,R) and luminescent Eu(III) complex [Eu(bisoQcd)(H₂O)₂] OTf (with bisoQcd = N,N′-bis(2-isoquinolinmethyl)-trans-1,2-diaminocyclohexane N,N′-diacetate and OTf = triflate) was synthesized and characterized. At physiological pH, the 1:1 [Eu(bisoQcd)(H₂O)₂]⁺ species, possessing two water molecules in the inner coordination sphere, is largely dominant. The interaction with bovine serum albumin (BSA) was studied by means of several experimental techniques, such as luminescence spectroscopy, isothermal titration calorimetry (ITC), molecular docking (MD), and molecular dynamics simulations (MDS). In this direction, a ligand competition study was also performed by using three clinically established drugs (i.e., ibuprofen, warfarin, and digitoxin). The nature of this interaction is strongly affected by the type of the involved heteroaromatic antenna in the Eu(III) complexes. In fact, the presence of isoquinoline rings drives the corresponding complex toward the protein superficial area containing the tryptophan residue 134 (Trp134). As the main consequence, the metal center undergoes the loss of one water molecule upon interaction with the side chain of a glutamic acid residue. On the other hand, the similar complex containing pyridine rings ([Eu(bpcd)(H₂O)₂]Cl with bpcd = N,N′-bis(2-pyridylmethyl)-trans-1,2-diaminocyclohexane N,N′-diacetate) interacts more weakly with the protein in a different superficial cavity, without losing the coordinated water molecules.

The effect of the antenna moiety on the interaction of two new luminescent Eu(III) complexes with BSA was studied. Results show that the complexes can be conveniently exploited as optical probes for albumin serum proteins by means of opposite mechanisms (switch-on−off of the luminescent signal).

Accurate detection of β-hCG in women's serum and cervical secretions for predicting early pregnancy viability based on time-resolved luminescent lanthanide nanoprobes

Sensitive and specific detection of β-hCG in women's serum and cervical secretions is of great significance for early pregnancy evaluation. However, the accurate detection of trace amounts of β-hCG in cervical secretions remains challenging because of its low level. Herein, we report a unique strategy for β-hCG detection in a heterogeneous sandwich-type bioassay by using LiLuF₄:Ce,Tb nanoparticles as time-resolved photoluminescence (PL) nanoprobes. By taking advantage of the intense and long-lived PL of the nanoprobes, the short-lived background autofluorescence can be completely eliminated, which enables the sensitive detection of β-hCG with a linear range of 0-10 ng mL^-1 and a detection limit down to 6.1 pg mL^-1, approximately two orders of magnitude improvement relative to that of a commercial β-hCG assay kit. Furthermore, we demonstrate the application of the nanoprobes for accurate detection of β-hCG in clinical serum and cervical secretion samples and unveil that the ratio of β-hCG levels in cervical secretions and serum can be a good indicator of early pregnancy viability in unknown locations. These findings bring new opportunities in perinatal medicine by employing luminescent lanthanide nanoprobes, thus laying a foundation for future development of luminescent nanoprobes for versatile biomedical applications.

Self-Assembled Monolayers of Redox-Active 4d-4f Heterobimetallic Complexes

In this work, we report the preparation of functional interfaces incorporating heterobimetallic systems consisting in the association of an electroactive carbon-rich ruthenium organometallic unit and a luminescent lanthanide ion (Ln = Eu³⁺ and Yb³⁺). The organometallic systems are functionalized with a terminal hexylthiol group for subsequent gold surface modification. The formation of self-assembled monolayers (SAMs) with these complex molecular architectures are thoroughly demonstrated by employing a combination of different techniques, including infrared reflection absorption spectroscopy, ellipsometry, contact angle, and cyclic voltammetry measurements. The immobilized heterobimetallic systems show fast electron-transfer kinetics and, hence, are capable of fast electrochemical response. In addition, the characteristic electrochemical signals of the SAMs were found to be sensitive to the presence of lanthanide centers at the bipyridyl terminal units. A positive shift of the potential of the redox signal is readily observed for lanthanide complexes compared to the bare organometallic ligand. This effect is equally observed for preformed complexes and on-surface complexation. Thus, an efficient ligating recruitment of europium and ytterbium cations at gold-modified electrodes is demonstrated, allowing for an easy electrochemical detection of the lanthanide ions along with an alternative preparative method of SAMs incorporating lanthanide cations compared to the immobilization of the preformed complex.

Chiral luminescent lanthanide complexes possessing strong (samarium, SmIII) circularly polarised luminescence (CPL), and their self-assembly into Langmuir-Blodgett films

The lanthanide directed self-assembly of chiral amphiphilic 2,6-pyridinedicarboxylic acid based ligands 1 and 2 with various Ln(CF₃SO₃)₃ (Ln = Tb^III, Sm^III, Lu^III, Dy^III) salts was studied in CH₃CN and evaluated with the expected 1 : 3 and 1 : 1 Ln : Ligand species forming in solution. Ligand chirality was retained and transferred, as depicted by circular dichroism (CD) and circularly polarised luminescence (CPL) measurements (for Tb^III and Sm^III), to the lanthanide centre upon complexation with high dissymmetry factor values for the Sm^III complexes obtained (g_lum = -0.44 and 0.29 and 0.45 and -0.23 for the ⁴G_5/2→⁶H_5/2 and the ⁴G_5/2→⁶H_7/2 transitions of Sm·1₃ and Sm·2₃, respectively). The ability of the complexes to form stable Langmuir monolayers at the air-water interface was also established while Langmuir-Blodgett films of Tb·L₃ and Sm·L₃ exhibited lanthanide luminescent emission.

Role of cationic carbosilane dendrons and metallic core of functionalized gold nanoparticles in their interaction with human serum albumin

Functionalization of gold nanoparticles by different chemical groups is an important issue regarding the biomedical applications of such particles. Therefore we have analyzed the interaction between gold nanoparticles functionalized by carbosilane dendrons with human serum albumin at different pHs, and in the presence of the protein unfolding agent, guanidine hydrochloride, using circular dichroism, zeta-potential and fluorescence quenching. The effect of a nanoparticle dendronization and pure dendrons on the immunoreactivity of albumin was estimated using ELISA. In addition, the tool to estimate the binding capacity of dendronized gold nanoparticles using a hydrophobic fluorescent probe 1,8-ANS (1-anilinonaphthalene-8-sulfonic acid) was chosen. We concluded that the effect of a nanoparticle on the structure, immunochemical properties and unfolding of albumin significantly decreased with second and third generations dendrons attached. Differences in pH dependence of the interaction between nanoparticles, their dendrons and albumin showed several effects of the "dendritic corona" and the metallic part of nanoparticle on the protein. These interactions indicate changes in the immunoreactivity of the protein, whereas dendron coating per se had no effect. Thus, dendronization of gold nanoparticles helps to shield them from interactions with plasma proteins.

Strategies for Preparing Albumin-based Nanoparticles for Multifunctional Bioimaging and Drug Delivery

Biosafety is the primary concern in clinical translation of nanomedicine. As an intrinsic ingredient of human blood without immunogenicity and encouraged by its successful clinical application in Abraxane, albumin has been regarded as a promising material to produce nanoparticles for bioimaging and drug delivery. The strategies for synthesizing albumin-based nanoparticles could be generally categorized into five classes: template, nanocarrier, scaffold, stabilizer and albumin-polymer conjugate. This review introduces approaches utilizing albumin in the preparation of nanoparticles and thereby provides scientists with knowledge of goal-driven design on albumin-based nanomedicine.

Fluorescent detection of dipicolinic acid as a biomarker of bacterial spores using lanthanide-chelated gold nanoparticles

Gold nanoparticles (GNPs) functionalized with ethylenediamine-lanthanide complexes (Eu-GNPs and Tb-GNPs) were used for the selective fluorescent detection of dipicolinic acid (DPA), a unique biomarker of bacterial spores, in water. Particles were characterized by transmission electron microscopy and zeta potential measurements. The coordination of DPA to the lanthanides resulted in the enhancement of the fluorescence. A selective response to DPA was observed over the nonselective binding of aromatic ligands. The ligand displacement strategy were also employed for the ratiometric fluorescent detection of DPA. 4,4,4-trifluoro-1-(2-naphthyl)-1,3-butanedion (TFNB) was chosen as an antenna to synthesize ternary complexes. The addition of DPA on EuGNP:TFNB ternary complex quenched the initial emission of the complex at 615nm and increased the TFNB emission at 450nm when excited at 350nm. The results demonstrated that the ratiometric fluorescent detection of DPA was achieved by ligand displacement strategy.

Selectively switching on europium emission in drug site one of human serum albumin

A luminescent europium probe has been discovered that binds selectively to drug-site I in human serum albumin, signalled by a ‘switching on’ of europium emission, and accompanied by strong induced circularly polarised luminescence.

Biological and environmental surface interactions of nanomaterials: characterization, modeling, and prediction

The understanding of nano-bio interactions is deemed essential in the design, application, and safe handling of nanomaterials. Proper characterization of the intrinsic physicochemical properties, including their size, surface charge, shape, and functionalization, is needed to consider the fate or impact of nanomaterials in biological and environmental systems. The characterizations of their interactions with surrounding chemical species are often hindered by the complexity of biological or environmental systems, and the drastically different surface physicochemical properties among a large population of nanomaterials. The complexity of these interactions is also due to the diverse ligands of different chemical properties present in most biomacromolecules, and multiple conformations they can assume at different conditions to minimize their conformational free energy. Often these interactions are collectively determined by multiple physical or chemical forces, including electrostatic forces, hydrogen bonding, and hydrophobic forces, and calls for multidimensional characterization strategies, both experimentally and computationally. Through these characterizations, the understanding of the roles surface physicochemical properties of nanomaterials and their surface interactions with biomacromolecules can play in their applications in biomedical and environmental fields can be obtained. To quantitatively decipher these physicochemical surface interactions, computational methods, including physical, statistical, and pharmacokinetic models, can be used for either analyses of large amounts of experimental characterization data, or theoretical prediction of the interactions, and consequent biological behavior in the body after administration. These computational methods include molecular dynamics simulation, structure-activity relationship models such as biological surface adsorption index, and physiologically-based pharmacokinetic models. WIREs Nanomed Nanobiotechnol 2017, 9:e1440. doi: 10.1002/wnan.1440 For further resources related to this article, please visit the WIREs website.

Cyclen lanthanide-based micellar structures for application as luminescent [Eu(iii)] and magnetic [Gd(iii)] resonance imaging (MRI) contrast agents

The synthesis of coordinatively unsaturated tetra-substituted 1,4,7,10-tetraazacyclododecane (cyclen) lanthanide complexes is described; these structures, possessing hydrophobic (C12-alkyl) tails and hydrophilic head groups, self-assemble into supramolecular micellar structures in aqueous solution, and hence can be utilised as novel contrast agents for MRI.

Lanthanide-directed synthesis of luminescent self-assembly supramolecular structures and mechanically bonded systems from acyclic coordinating organic ligands

Herein some examples of the use of lanthanide ions (f-metal ions) to direct the synthesis of luminescent self-assembly systems (architectures) will be discussed. This area of lanthanide supramolecular chemistry is fast growing, thanks to the unique physical (magnetic and luminescent) and coordination properties of the lanthanides, which are often transferred to the resulting supermolecule. The emphasis herein will be on systems that are luminescent, and hence, generated by using either visibly emitting ions (such as Eu(III), Tb(III) and Sm(III)) or near infrared emitting ions (like Nd(III), Yb(III) and Er(III)), formed through the use of templating chemistry, by employing structurally simple ligands, possessing oxygen and nitrogen coordinating moieties. As the lanthanides have high coordination requirements, their use often allows for the formation of coordination compounds and supramolecular systems such as bundles, grids, helicates and interlocked molecules that are not synthetically accessible through the use of other commonly used templating ions such as transition metal ions. Hence, the use of the rare-earth metal ions can lead to the formation of unique and stable species in both solution and in the solid state, as well as functional and responsive structures.

Approach and Coalescence of Gold Nanoparticles Driven by Surface Thermodynamic Fluctuations and Atomic Interaction Forces

The approach and coalescence behavior of gold nanoparticles on a silicon surface were investigated by experiments and molecular dynamics simulations. By analyzing the behavior of the atoms in the nanoparticles in the simulations, it was found that the atoms in a single isolated nanoparticle randomly fluctuated and that the surface atoms showed greater fluctuation. The fluctuation increased as the temperature increased. When there were two or more neighboring nanoparticles, the fluctuating surface atoms of the nanoparticles "flowed" toward the neighboring nanoparticle because of atomic interaction forces between the nanoparticles. With the surface atoms "flowing", the gold nanoparticles approached and finally coalesced. The simulation results were in good agreement with the experimental results. It can be concluded that surface thermodynamic fluctuations and atomic interaction forces are the causes of the approach and coalescence behavior of the gold nanoparticles.

Ru(II)-polypyridyl surface functionalised gold nanoparticles as DNA targeting supramolecular structures and luminescent cellular imaging agents

The development of Ru(II) functionalized gold nanoparticles 1–3·AuNP is described. These systems were found to be mono-disperse with a hydrodynamic radius of ca. 15 nm in water but gave rise to the formation of higher order structures in buffered solution. The interaction of 1–3·AuNP with DNA was also studied by spectroscopic and microscopic methods and suggested the formation of large self-assembly structures in solution. The uptake of 1–3·AuNP by cancer cells was studied using both confocal fluorescence as well as transmission electron microscopy (TEM), with the aim of investigating their potential as tools for cellular biology. These systems displaying a non-toxic profile with favourable photophysical properties may have application across various biological fields including diagnostics and therapeutics.

Tunable GUMBOS-based sensor array for label-free detection and discrimination of proteins

We report a sensor array approach, based on a novel group of 6-(p-toluidino)-2-naphthalenesulfonate (TNS)-based organic salts, for sensitive and label-free sensing of proteins.

Study on the structural and electrocatalytic properties of Ba2+- and Eu3+-doped silica xerogels as sensory platforms

This work reports on the sol–gel synthesis of barium- and europium-doped silica xerogel and its use as an electrocatalytic sensor.

Reversible redox modulation of a lanthanide emissive molecular film

Herein we demonstrate redox switchable emission from a sensitised, europium-ferrocene containing, molecular film assembled by a novel nitrene-based strategy. Electrochemical modulation of europium emission upon switching the ferrocene moiety's redox state is ascribed to the reversible generation of a quenching ferrocenium species.

Monolayer protected gold nanoparticles with metal-ion binding sites: functional systems for chemosensing applications

Au NPs containing binding sites for metal ions in the monolayer are attractive components of sensing assays.

Detection of human immunoglobulin G by label-free electrochemical immunoassay modified with ultralong CuS nanowires

A novel label-free electrochemical immunoassay modified with ultralong CuS nanowires was developed for the detection of human immunoglobulin G.

Development of morin-conjugated Au nanoparticles: exploring the interaction efficiency with BSA using spectroscopic methods

In order to enhance its interaction efficiency with biomacromolecules for the usage as a therapeutic agent, we have conjugated morin, an antioxidant activity and anti-tumor drug, with citrate-coated Au nanoparticles (M-C-AuNPs). M-C-AuNPs were prepared by reducing chloroauric acid using trisodium citrate in the boiling condition, and the resulted M-C-AuNPs were characterized by UV-vis absorption spectroscopy, Transmission Electron Microscopy (TEM), X-ray diffraction (XRD) and FTIR analysis. In this article, UV-vis absorption spectroscopy in combination with fluorescence spectroscopy, and circular dichroism (CD) spectroscopy were employed to investigate the interactions between M-C-AuNPs and bovine serum albumin (BSA), C-AuNPs and BSA in a phosphate buffer at pH 7.4. By comparing the quenching constant KSV, effective quenching constant Ka, binding constant Kb and the number of binding sites n, it is clearly suggested that M-C-AuNPs could enhance the binding force of morin with BSA, which would pave the way for the design of nanotherapeutic agents with improved functionality.

Highly emitting near-infrared lanthanide "encapsulated sandwich" metallacrown complexes with excitation shifted toward lower energy

Near-infrared (NIR) luminescent lanthanide complexes hold great promise for practical applications, as their optical properties have several complementary advantages over organic fluorophores and semiconductor nanoparticles. The fundamental challenge for lanthanide luminescence is their sensitization through suitable chromophores. The use of the metallacrown (MC) motif is an innovative strategy to arrange several organic sensitizers at a well-controlled distance from a lanthanide cation. Herein we report a series of lanthanide “encapsulated sandwich” MC complexes of the form Ln3+ [12-MC(Zn(II),quinHA)-4]2[24-MC(Zn(II),quinHA)-8] (Ln3+ [Zn(II)MC(quinHA)]) in which the MC framework is formed by the self-assembly of Zn2+ ions and tetradentate chromophoric ligands based on quinaldichydroxamic acid (quinHA). A first-generation of luminescent MCs was presented previously but was limited due to excitation wavelengths in the UV. We report here that through the design of the chromophore of the MC assembly, we have significantly shifted the absorption wavelength toward lower energy (450 nm). In addition to this near-visible inter- and/or intraligand charge transfer absorption, Ln3+ [Zn(II)MC(quinHA)] exhibits remarkably high quantum yields, long luminescence lifetimes (CD3OD; Yb3+, QLn(L) = 2.88(2)%, τobs = 150.7(2) μs; Nd3+, QLn(L) = 1.35(1)%, τobs = 4.11(3) μs; Er3+, QLn(L) = 3.60(6)·10–2%, τobs = 11.40(3) μs), and excellent photostability. Quantum yields of Nd3+ and Er3+ MCs in the solid state and in deuterated solvents, upon excitation at low energy, are the highest values among NIR-emitting lanthanide complexes containing C–H bonds. The versatility of the MC strategy allows modifications in the excitation wavelength and absorptivity through the appropriate design of the ligand sensitizer, providing a highly efficient platform with tunable properties.

Exploiting lanthanide luminescence in supramolecular assemblies

We review herein significant and recent work focused on the incorporation of luminescent lanthanides into switchable, supramolecular and surface bound assemblies.

Fluorescein-based ionic liquid sensor for label-free detection of serum albumins

Fluorescein-based room temperature ionic liquid as a fluorescent probe for highly selective and sensitive detection of serum albumins.