Controlling self-assembly of engineered peptides on graphite by rational mutation

Incorporation of phenylcarbonyl groups in the sidechain: A tool to induce ordered assembly of peptides on surfaces

The possibility of introducing various functionalities on peptides with relative ease allows them to be used for molecular applications. However, oligopeptides prepared entirely from proteinogenic amino acids seldom assemble as ordered structures on surfaces. Therefore, sidechain modifications of peptides that can increase the intermolecular interactions without altering the constitution of a given peptide become an attractive route to self-assembling them on surfaces. We find that replacing phenylalanine residues with unusual amino acids that have phenylcarbonyl sidechains in oligopeptides increases the formation of ordered self-assembly on a highly ordered pyrolytic graphite surface. Peptides containing the modified amino acids provided extended long-range ordered assemblies, while the analogous peptides containing phenylalanine residues failed to form long-range assemblies. X-ray crystallographic analysis of the bulk structures of these peptides and the analogous peptides containing phenylalanine residues reveal that such modifications do not alter the secondary structure in crystals. It also reveals that the secondary hydrogen bonding interaction through phenylcarbonyl sidechains facilitates extended growth of the peptides on graphite.

Information Transmission through Biotic-Abiotic Interfaces to Restore or Enhance Human Function

Advancements in reliable information transfer across biotic-abiotic interfaces have enabled the restoration of lost human function. For example, communication between neuronal cells and electrical devices restores the ability to walk to a tetraplegic patient and vision to patients blinded by retinal disease. These impactful medical achievements are aided by tailored biotic-abiotic interfaces that maximize information transfer fidelity by considering the physical properties of the underlying biological and synthetic components. This Review develops a modular framework to define and describe the engineering of biotic and abiotic components as well as the design of interfaces to facilitate biotic-abiotic information transfer using light or electricity. Delineating the properties of the biotic, interface, and abiotic components that enable communication can serve as a guide for future research in this highly interdisciplinary field. Application of synthetic biology to engineer light-sensitive proteins has facilitated the control of neural signaling and the restoration of rudimentary vision after retinal blindness. Electrophysiological methodologies that use brain-computer interfaces and stimulating implants to bypass spinal column injuries have led to the rehabilitation of limb movement and walking ability. Cellular interfacing methodologies and on-chip learning capability have been made possible by organic transistors that mimic the information processing capacity of neurons. The collaboration of molecular biologists, material scientists, and electrical engineers in the emerging field of biotic-abiotic interfacing will lead to the development of prosthetics capable of responding to thought and experiencing touch sensation via direct integration into the human nervous system. Further interdisciplinary research will improve electrical and optical interfacing technologies for the restoration of vision, offering greater visual acuity and potentially color vision in the near future.

Dynamics of Molecular Self-Assembly of Short Peptides at Liquid-Solid Interfaces - Effect of Charged Amino Acid Point Mutations

Self-organizing solid-binding peptides on atomically flat solid surfaces offer a unique bio/nano hybrid platform, useful for understanding the basic nature of biology/solid coupling and their practical applications. The surface behavior of peptides is determined by their molecular folding, which is influenced by various factors and is challenging to study. Here, the effect of charged amino acids is studied on the self-assembly behavior of a directed evolution selected graphite-binding dodecapeptide on graphite surface. Two mutations, M6 and M8, are designed to introduce negatively and positively charged moieties, respectively, at the anchoring domain of the wild-type (WT) peptide, affecting both binding and assembly. The questions addressed here are whether mutant peptides exhibit molecular crystal formation and demonstrate molecular recognition on the solid surface based on the specific mutations. Frequency-modulated atomic force microscopy is used for observations of the surface processes dynamically in water at molecular resolution over several hours at the ambient. The results indicate that while the mutants display distinct folding and surface behavior, each homogeneously nucleates and forms 2D self-organized patterns, akin to the WT peptide. However, their growth dynamics, domain formation, and crystalline lattice structures differ significantly. The results represent a significant step toward the rational design of bio/solid interfaces, potent facilitators of a variety of future implementations.

Graphene exfoliation using multidomain peptides

Liquid-phase exfoliation using biomolecules in aqueous solution is a promising approach to obtain high quality 2D nanosheets. For example, the well-studied graphene-binding peptide, P1 (sequence HSSYWYAFNNKT), has been previously investigated and shown to have a good ability to exfoliate graphene sheets in aqueous conditions under sonication, maintaining colloidal stability. Building on this, the biomolecular exfoliant and assembly motif (BEAM) peptide, that features a graphene-binding domain at one end and a hexagonal boron nitride (h-BN) binding domain at the other, separated by a 10-carbon fatty acid chain in the centre, is shown to exfoliate graphene sheets from bulk graphite in aqueous media. An in-depth examination of the ability of the BEAM to both facilitate sheet exfoliation under sonication conditions and also maintain colliodal stability is provided through molecular dynamics simulations. These findings open new possibilities for designing multi-functional molecules that can both exfoliate and organise 2D materials into heterostructures under ambient conditions in aqueous media.

Two-Dimensional Layered Nanomaterials Steering Self-Assembly of Dodecapeptides with Three Building Blocks

Self-assembly of peptides on layered nanomaterials such as graphite and MoS2 in the formation of long-range ordered two-dimensional nanocrystal patterns leading to its potential applications for biosensing and bioelectronics has attracted significant interest in nanoscience and nanotechnology. However, controlling the self-assembly of peptides on nanomaterials is still challenging due to the unclear role of nanomaterials in steering self-assembly. Here, we used the in-situ AFM technique to capture different changes of peptide coverage as well as lengthening and widening rates depending on peptide concentrations, show the distinct boundary dynamics of two stabilized peptide domains, and resolve the molecular resolution structural differences and specific orientation of peptide on both nanomaterials. Moreover, ex-situ results showed that the nanomaterial layers tuned the opposite changes of nanowire heights and densities and displayed the different water-resistance stabilities on both nanomaterials. This work provides a basis for understanding nanomaterials steering peptide self-assembly and using hybrid bionanomaterials as a scaffold, enabling for potential biosensing and bioelectronics applications.

Influence of Peptoid Sequence on the Mechanisms and Kinetics of 2D Assembly

Two-dimensional (2D) materials have attracted intense interest due to their potential for applications in fields ranging from chemical sensing to catalysis, energy storage, and biomedicine. Recently, peptoids, a class of biomimetic sequence-defined polymers, have been found to self-assemble into 2D crystalline sheets that exhibit unusual properties, such as high chemical stability and the ability to self-repair. The structure of a peptoid is close to that of a peptide except that the side chains are appended to the amide nitrogen rather than the α carbon. In this study, we investigated the effect of peptoid sequence on the mechanism and kinetics of 2D assembly on mica surfaces using in situ AFM and time-resolved X-ray scattering. We explored three distinct peptoid sequences that are amphiphilic in nature with hydrophobic and hydrophilic blocks and are known to self-assemble into 2D sheets. The results show that their assembly on mica starts with deposition of aggregates that spread to establish 2D islands, which then grow by attachment of peptoids, either monomers or unresolvable small oligomers, following well-known laws of crystal step advancement. Extraction of the solubility and kinetic coefficient from the dependence of the growth rate on peptoid concentration reveals striking differences between the sequences. The sequence with the slowest growth rate in bulk and with the highest solubility shows almost no detachment; i.e., once a growth unit attaches to the island edge, there is almost no probability of detaching. Furthermore, a peptoid sequence with a hydrophobic tail conjugated to the final carboxyl residue in the hydrophilic block has enhanced hydrophobic interactions and exhibits rapid assembly both in the bulk and on mica. These assembly outcomes suggest that, while the π-π interactions between adjacent hydrophobic blocks play a major role in peptoid assembly, sequence details, particularly the location of charged groups, as well as interaction with the underlying substrate can significantly alter the thermodynamic stability and assembly kinetics.

Supramolecular self-assembled peptide-engineered nanofibers: A propitious proposition for cancer therapy

Cancer is a devastating disease that causes a substantial number of deaths worldwide. Current therapeutic interventions for cancer include chemotherapy, radiation therapy, or surgery. These conventional therapeutic approaches are associated with disadvantages such as multidrug resistance, destruction of healthy tissues, and tissue toxicity. Therefore, there is a paradigm shift in cancer management wherein nanomedicine-based novel therapeutic interventions are being explored to overcome the aforementioned disadvantages. Supramolecular self-assembled peptide nanofibers are emerging drug delivery vehicles that have gained much attention in cancer management owing to their biocompatibility, biodegradability, biomimetic property, stimuli-responsiveness, transformability, and inherent therapeutic property. Supramolecules form well-organized structures via non-covalent linkages, the intricate molecular arrangement helps to improve tissue permeation, pharmacokinetic profile and chemical stability of therapeutic agents while enabling targeted delivery and allowing efficient tumor imaging. In this review, we present fundamental aspects of peptide-based self-assembled nanofiber fabrication their applications in monotherapy/combinatorial chemo- and/or immuno-therapy to overcome multi-drug resistance. The role of self-assembled structures in targeted/stimuli-responsive (pH, enzyme and photo-responsive) drug delivery has been discussed along with the case studies. Further, recent advancements in peptide nanofibers in cancer diagnosis, imaging, gene therapy, and immune therapy along with regulatory obstacles towards clinical translation have been deliberated.

Data-driven design of a multiplexed, peptide-sensitized transistor to detect breath VOC markers of COVID-19

Exhaled human breath contains a rich mixture of volatile organic compounds (VOCs) whose concentration can vary in response to disease or other stressors. Using simulated odorant-binding proteins (OBPs) and machine learning methods, we designed a multiplex of short VOC- and carbon-binding peptide probes that detect a characteristic "VOC fingerprint". Specifically, we target VOCs associated with COVID-19 in a compact, molecular sensor array that directly transduces vapor composition into multi-channel electrical signals. Rapidly synthesizable, chimeric VOC- and solid-binding peptides were derived from selected OBPs using multi-sequence alignment with protein database structures. Selective peptide binding to targeted VOCs and sensor surfaces was validated using surface plasmon resonance spectroscopy and quartz crystal microbalance. VOC sensing was demonstrated by peptide-sensitized, exposed-channel carbon nanotube transistors. The data-to-device pipeline enables the development of novel devices for non-invasive monitoring, diagnostics of diseases, and environmental exposure assessment.

Molecular Scale Structure and Kinetics of Layer-by-Layer Peptide Self-Organization at Atomically Flat Solid Surfaces

Understanding the mechanisms of self-organization of short peptides into two- and three-dimensional architectures are of great interest in the formation of crystalline biomolecular systems and their practical applications. Since the assembly is a dynamic process, the study of structural development is challenging at the submolecular dimensions continuously across an adequate time scale in the natural biological environment, in addition to the complexities stemming from the labile molecular structures of short peptides. Self-organization of solid binding peptides on surfaces offers prospects to overcome these challenges. Here we use a graphite binding dodecapeptide, GrBP5, and record its self-organization process of the first two layers on highly oriented pyrolytic graphite surface in an aqueous solution by using frequency modulation atomic force microscopy in situ. The observations suggest that the first layer forms homogeneously, generating self-organized crystals with a lattice structure in contact with the underlying graphite. The second layer formation is mostly heterogeneous, triggered by the crystalline defects on the first layer, growing row-by-row establishing nominally diverse biomolecular self-organized structures with transient crystalline phases. The assembly is highly dependent on the peptide concentration, with the nucleation being high in high molecular concentrations, e.g., >100 μM, while the domain size is small, with an increase in the growth rate that gradually slows down. Self-assembled peptide crystals are composed of either singlets or doublets establishing P1 and P2 oblique lattices, respectively, each commensurate with the underlying graphite lattice with chiral crystal relations. This work provides insights into the surface behavior of short peptides on solids and offers quantitative guidance toward elucidating molecular mechanisms of self-assembly helping in the scientific understanding and construction of coherent bio/nano hybrid interfaces.

Designable peptides on graphene field-effect transistors for selective detection of odor molecules

Gas sensing based on graphene field-effect transistors (GFETs) has gained broad interest due to their high sensitivity. Further progress in gas sensing with GFETs requires to detection of various odor molecules for applications in the environmental monitoring, healthcare, food, and cosmetic industries. To develop the ubiquitous odor-sensing system, establishing an artificial sense of smell with electronic devices by mimicking olfactory receptors will be key. Although the application of olfactory receptors to GFETs is straightforward for odor sensing, synthetic molecules with a similar function to olfactory receptors would be desirable to realize the robust performance of sensing. In this work, we designed three new peptides consisting of two domains: a bio-probe to the target molecules and a molecular scaffold. These peptides were rationally designed based on a motif sequence in olfactory receptors and self-assembled into a molecular thin film on GFETs. Limonene, methyl salicylate, and menthol were employed as representative odor molecules of plant flavors to demonstrate the biosensing of odor molecules. The conductivity change of GFETs against the binding to odor molecules with various concentrations and the dynamic response revealed a distinct signature of three different peptides against individual species of the target molecules. The kinetic response of each peptide exhibited characteristic time constants in the adsorption and desorption process, also supported by the principal component analysis. Our demonstration of the graphene odor sensors with the designed peptides opens a way to establish future peptide-array sensors with multi-sequence of peptide, realizing an odor sensing system with higher selectivity.

Self-assembled GA-Repeated Peptides as a Biomolecular Scaffold for Biosensing with MoS2 Electrochemical Transistors

Biosensors with two-dimensional materials have gained wide interest due to their high sensitivity. Among them, single-layer MoS2 has become a new class of biosensing platform owing to its semiconducting property. Immobilization of bioprobes directly onto the MoS2 surface with chemical bonding or random physisorption has been widely studied. However, these approaches potentially cause a reduction of conductivity and sensitivity of the biosensor. In this work, we designed peptides that spontaneously align into monomolecular-thick nanostructures on electrochemical MoS2 transistors in a non-covalent fashion and act as a biomolecular scaffold for efficient biosensing. These peptides consist of repeated domains of glycine and alanine in the sequence and form self-assembled structures with sixfold symmetry templated by the lattice of MoS2. We investigated electronic interactions of self-assembled peptides with MoS2 by designing their amino acid sequence with charged amino acids at both ends. Charged amino acids in the sequence showed a correlation with the electrical properties of single-layer MoS2, where negatively charged peptides caused a shift of threshold voltage in MoS2 transistors and neutral and positively charged peptides had no significant effect on the threshold voltage. The transconductance of transistors had no decrease due to the self-assembled peptides, indicating that aligned peptides can act as a biomolecular scaffold without degrading the intrinsic electronic properties for biosensing. We also investigated the impact of peptides on the photoluminescence (PL) of single-layer MoS2 and found that the PL intensity changed sensitively depending on the amino acid sequence of peptides. Finally, we demonstrated a femtomolar-level sensitivity of biosensing using biotinylated peptides to detect streptavidin.

Rational Design of a Bifunctional Peptide Exhibiting Lithium Titanate Oxide and Carbon Nanotube Affinities for Lithium-Ion Battery Applications

Phage display is employed as a method for identifying polypeptides that bind to lithium-ion battery materials, specifically lithium titanate oxide (LTO) and multiwalled carbon nanotubes (MWCNTs). Output/input assays are used as a quantitative measure to narrow down the strongest binding polypeptides from several peptides selected through biopanning. Negatively stained transmission electron microscopy is used to verify that a phage presenting a particular LTO or MWCNT binding peptide sequence colocalizes with the respective material. Heterologous expression allows for ample polypeptides to be grown and purified using a peptide expression vector. Isothermal titration calorimetry in conjunction with alanine scanning enables determination of the pertinent residues involved in LTO binding and yields a dissociation constant of 3.41 μM. A rationally designed bifunctional peptide exhibiting LTO and MWCNT binding domains is subsequently validated to exhibit both LTO and MWCNT affinities and is incorporated as a binding agent in LTO coin-type electrochemical cells where the bifunctional peptide demonstrates stability at high cycle rates and potential as an alternative to non-specific binding agents for aqueous slurry processing of lithium-ion battery electrodes.

Biomedical applications of solid-binding peptides and proteins

Over the past decades, solid-binding peptides (SBPs) have found multiple applications in materials science. In non-covalent surface modification strategies, solid-binding peptides are a simple and versatile tool for the immobilization of biomolecules on a vast variety of solid surfaces. Especially in physiological environments, SBPs can increase the biocompatibility of hybrid materials and offer tunable properties for the display of biomolecules with minimal impact on their functionality. All these features make SBPs attractive for the manufacturing of bioinspired materials in diagnostic and therapeutic applications. In particular, biomedical applications such as drug delivery, biosensing, and regenerative therapies have benefited from the introduction of SBPs. Here, we review recent literature on the use of solid-binding peptides and solid-binding proteins in biomedical applications. We focus on applications where modulating the interactions between solid materials and biomolecules is crucial. In this review, we describe solid-binding peptides and proteins, providing background on sequence design and binding mechanism. We then discuss their application on materials relevant for biomedicine (calcium phosphates, silicates, ice crystals, metals, plastics, and graphene). Although the limited characterization of SBPs still represents a challenge for their design and widespread application, our review shows that SBP-mediated bioconjugation can be easily introduced into complex designs and on nanomaterials with very different surface chemistries.

Achieving regioselective materials binding using multidomain peptides

The ability to integrate two disparate materials-binding domains into a single ligand to achieve regiospecific binding would be powerful to direct material assembly; however, this has proven challenging to achieve due to cross-materials binding. Accomplishing this goal might be achieved by harnessing the precision of biology to exploit the recognition between peptides and specific nanomaterials. Here, a designed bifunctional molecule termed Biomolecular Exfoliant and Assembly Motifs (BEAM) is introduced, featuring two different materials-binding peptide domains, one for graphene and one for hexagonal boron nitride (h-BN), at each end of the molecule, separated by a fatty acid spacer. The BEAM is demonstrated to bind strongly to both graphene and h-BN surfaces, and in each case the materials-binding peptide domain is shown to preferentially bind its target material. Critically, the two materials-binding domains exhibited limited cross-domain interaction. The BEAM design concept shows substantial potential to eventually guide self-organization of a range of materials in aqueous media.

Molecular-level insights into the surface-induced assembly of functional bacterial amyloid

Protein coating material is important in many technological fields. The interaction between carbon nanomaterial and protein is especially interesting since it makes the development of novel hybrid materials possible. Functional bacterial amyloid (FuBA) is promising as a coating material because of its desirable features, such as well-defined molecular structure, robustness against harsh conditions, and easily engineerable functionality. Here, we report the systematic assembly of the functional amyloid protein, CsgA, from Escherichia coli (E. coli) on graphite. We characterize the assemblies using scanning tunneling microscopy (STM) and show that CsgA forms assemblies according to systematic patterns, dictated by the graphite lattice. In addition, we show that graphite flakes induce the fibrillization of CsgA, in vitro, suggesting a surface-induced conformational change of CsgA facilitated by the graphite lattice. Using coarse-grained molecular dynamics simulations, we model the adhesion and lamellar formation of a CsgA-derived peptide and conclude that peptides are adsorbed both as monomers and smaller aggregates leading initially to unordered graphite-bound aggregates, which are followed by rearrangement into lamellar structures. Finally, we show that CsgA-derived peptides can be immobilized in very systematic assemblies and their molecular orientation can be tuned using a small chaperone-like molecule. Our findings have implications for the development of FuBA-based biosensors, catalysts, and other technologies requiring well-defined protein assemblies on graphite.

Manipulation of peptide-fatty acid bioconjugates on graphene: effects of fatty acid chain length and attachment point

The non-destructive functionalisation of graphene in aqueous media is a critical process with the potential to enhance the versatility of the 2D nanosheet material as a technological enabler. This could also unlock strategies for a wider uptake of graphene in bio-related applications. Graphene functionalisation can be achieved using peptides that specifically recognise the carbon-based material, resulting in persistent non-covalent adsorption without damaging the nanosheet. Bio-conjugation of non-natural moieties with these peptides can incorporate multifunctionality, further extending the applicability of these interfaces. Here, bio-conjugates comprising a graphene-binding peptide with a fatty acid chain of varying length are investigated for their binding affinity and adsorbed structures at the aqueous graphene interface. Through an integration of quartz crystal microbalance and atomic force microscopy data with advanced sampling molecular simulations, variations in the binding of these bio-conjugates is determined. Conjugation at either terminus led to good interfacial contact, and for a given attachment point, the changes in the fatty acid length did not substantially disrupt the conformations of the adsorbed peptide domain. These findings provide a solid foundation for designing multi-functional bio-interfaces for sensing and healthcare.

Functional Bacterial Amyloids: Understanding Fibrillation, Regulating Biofilm Fibril Formation and Organizing Surface Assemblies

Functional amyloid is produced by many organisms but is particularly well understood in bacteria, where proteins such as CsgA (E. coli) and FapC (Pseudomonas) are assembled as functional bacterial amyloid (FuBA) on the cell surface in a carefully optimized process. Besides a host of helper proteins, FuBA formation is aided by multiple imperfect repeats which stabilize amyloid and streamline the aggregation mechanism to a fast-track assembly dominated by primary nucleation. These repeats, which are found in variable numbers in Pseudomonas, are most likely the structural core of the fibrils, though we still lack experimental data to determine whether the repeats give rise to β-helix structures via stacked β-hairpins (highly likely for CsgA) or more complicated arrangements (possibly the case for FapC). The response of FuBA fibrillation to denaturants suggests that nucleation and elongation involve equal amounts of folding, but protein chaperones preferentially target nucleation for effective inhibition. Smart peptides can be designed based on these imperfect repeats and modified with various flanking sequences to divert aggregation to less stable structures, leading to a reduction in biofilm formation. Small molecules such as EGCG can also divert FuBA to less organized structures, such as partially-folded oligomeric species, with the same detrimental effect on biofilm. Finally, the strong tendency of FuBA to self-assemble can lead to the formation of very regular two-dimensional amyloid films on structured surfaces such as graphite, which strongly implies future use in biosensors or other nanobiomaterials. In summary, the properties of functional amyloid are a much-needed corrective to the unfortunate association of amyloid with neurodegenerative disease and a testimony to nature's ability to get the best out of a protein fold.

De novo designed peptides form a highly catalytic ordered nanoarchitecture on a graphite surface

Here we demonstrate that short peptides, de novo designed from first principles, self-assemble on the surface of graphite to produce a highly robust and catalytic nanoarchitecture, which promotes peroxidation reactions with activities that rival those of natural enzymes in both single and multi-substrate reactions. These designable peptides recapitulate the symmetry of the underlying graphite surface and act as molecular scaffolds to immobilize hemin molecules on the electrode in a hierarchical self-assembly manner. The highly ordered and uniform hybrid graphite-peptide-hemin nanoarchitecture shows the highest faradaic efficiency of any hybrid electrode reported. Given the explosive growth of the types of chemical reactions promoted by self-assembled peptide materials, this new approach to creating complex electrocatalytic assemblies will yield highly efficient and practically applicable electrocatalysts.

Supramolecular assembly of protein building blocks: from folding to function

Several phenomena occurring throughout the life of living things start and end with proteins. Various proteins form one complex structure to control detailed reactions. In contrast, one protein forms various structures and implements other biological phenomena depending on the situation. The basic principle that forms these hierarchical structures is protein self-assembly. A single building block is sufficient to create homogeneous structures with complex shapes, such as rings, filaments, or containers. These assemblies are widely used in biology as they enable multivalent binding, ultra-sensitive regulation, and compartmentalization. Moreover, with advances in the computational design of protein folding and protein-protein interfaces, considerable progress has recently been made in the de novo design of protein assemblies. Our review presents a description of the components of supramolecular protein assembly and their application in understanding biological phenomena to therapeutics.

Cascade chiral amine synthesis catalyzed by site-specifically co-immobilized alcohol and amine dehydrogenases

Sustainable and efficient production of chiral amines was realized with an oriented co-immobilized dual-enzyme system via SiBP-tag.

Solid-Binding Peptide-Guided Spatially Directed Immobilization of Kinetically Matched Enzyme Cascades in Membrane Nanoreactors

Biocatalysis is a useful strategy for sustainable green synthesis of fine chemicals due to its high catalytic rate, reaction specificity, and operation under ambient conditions. Addressable immobilization of enzymes onto solid supports for one-pot multistep biocatalysis, however, remains a major challenge. In natural pathways, enzymes are spatially coupled to prevent side reactions, eradicate inhibitory products, and channel metabolites sequentially from one enzyme to another. Construction of a modular immobilization platform enabling spatially directed assembly of multiple biocatalysts would, therefore, not only allow the development of high-efficiency bioreactors but also provide novel synthetic routes for chemical synthesis. In this study, we developed a modular cascade flow reactor using a generalizable solid-binding peptide-directed immobilization strategy that allows selective immobilization of fusion enzymes on anodic aluminum oxide (AAO) monoliths with high positional precision. Here, the lactate dehydrogenase and formate dehydrogenase enzymes were fused with substrate-specific peptides to facilitate their self-immobilization through the membrane channels in cascade geometry. Using this cascade model, two-step biocatalytic production of l-lactate is demonstrated with concomitant regeneration of soluble nicotinamide adenine dinucleotide (NADH). Both fusion enzymes retained their catalytic activity upon immobilization, suggesting their optimal display on the support surface. The 85% cascading reaction efficiency was achieved at a flow rate that kinetically matches the residence time of the slowest enzyme. In addition, 84% of initial catalytic activity was preserved after 10 days of continuous operation at room temperature. The peptide-directed modular approach described herein is a highly effective strategy to control surface orientation, spatial localization, and loading of multiple enzymes on solid supports. The implications of this work provide insight for the single-step construction of high-power cascadic devices by enabling co-expression, purification, and immobilization of a variety of engineered fusion enzymes on patterned surfaces.

Cosolvents Restrain Self-Assembly of a Fibroin-Like Peptide on Graphite

Controllable self-assembly of peptides on solid surfaces has been investigated for establishing functional bio/solid interfaces. In this work, we study the influence of organic solvents on the self-assembly of a fibroin-like peptide on a graphite surface. The peptide has been designed by mimicking fibroin proteins to have strong hydrogen bonds among peptides enabling their self-assembly. We have employed cosolvents of water and organic solvents with a wide range of dielectric constants to control peptide self-assembly on the surface. Atomic force microscopy has revealed that the peptides self-assemble into highly ordered monolayer-thick linear structures on graphite after incubation in pure water, where the coverage of peptides on the surface is more than 85%. When methanol is mixed, the peptide coverage becomes zero at a threshold concentration of 30% methanol on graphite and 25% methanol on MoS₂. The threshold concentration in ethanol, isopropanol, dimethyl sulfoxide, and acetone varies depending on the dielectric constant with restraining self-assembly of the peptides, and particularly low dielectric-constant protic solvents prevent the peptide self-assembly significantly. The observed phenomena are explained by competitive surface adsorption of the organic solvents and peptides and the solvation effect of the peptide assembly.

Improved Microbial Fuel Cell Performance by Engineering E. coli for Enhanced Affinity to Gold

Microorganism affinity for surfaces can be controlled by introducing material binding motifs into proteins such as fimbrial tip and outer membrane proteins. Here, controlled surface affinity is used to manipulate and enhance electrical power production in a typical bioelectrochemical system, a microbial fuel cell (MFC). Specifically, gold-binding motifs of various affinity were introduced into two scaffolds in Escherichia coli: eCPX, a modified version of outer membrane protein X (OmpX), and FimH, the tip protein of the fimbriae. The behavior of these strains on gold electrodes was examined in small-scale (240 µL) MFCs and 40 mL U-tube MFCs. A clear correlation between the affinity of a strain for a gold surface and the peak voltage produced during MFC operation is shown in the small-scale MFCs; strains displaying peptides with high affinity for gold generate potentials greater than 80 mV while strains displaying peptides with minimal affinity to gold produce potentials around 30 mV. In the larger MFCs, E. coli strains with high affinity to gold exhibit power densities up to 0.27 mW/m2, approximately a 10-fold increase over unengineered strains lacking displayed peptides. Moreover, in the case of the modified FimH strains, this increased power production is sustained for five days.

Chiral Recognition of Self-Assembled Peptides on MoS2 via Lattice Matching

Chiral recognition of peptides on solid surfaces has been studied for a better understanding of their assembly mechanism toward its applications in stereochemistry and enantioselective catalysis. However, moving from small peptides such as dipeptides, understanding the chiral recognition of larger biomolecules such as oligopeptides or peptides with a larger sequence is challenging. Furthermore, their intrinsic mechanism for chiral recognition in liquid conditions was poorly investigated experimentally. Here, we used in/ex situ atomic force microscopy (AFM) to investigate the chiral recognition of self-assembled structures of l/d-type peptides on molybdenum disulfide (MoS₂). We chose single-layer MoS₂ with a triangular shape as a substrate for the self-assembly of peptides. The facet edges of MoS₂ were utilized as a landmark to identify the crystallographic orientation of their ordered structures. We found both peptide enantiomers formed nanowires on MoS₂ with a mirror symmetry according to the facet edges of MoS₂. From in situ AFM measurements, we found a dimension of a unit cell in the self-assembled structure and proposed a model of lattice matching between peptides and MoS₂ lattice. The lattice matching for chiral recognition was further investigated by changing peptide sequences and surface lattice from MoS₂ to graphite. This work further deepened the understanding of biomolecular chiral recognition and will lead us to rationally design specific morphologies and conformations of chiral self-assembled structures of peptides with expected functions in the future.

Engineering Biomolecular Self-Assembly at Solid-Liquid Interfaces

Biomolecular self-assembly is a key process used by life to build functional materials from the "bottom up." In the last few decades, bioengineering and bionanotechnology have borrowed this strategy to design and synthesize numerous biomolecular and hybrid materials with diverse architectures and properties. However, engineering biomolecular self-assembly at solid-liquid interfaces into predesigned architectures lags the progress made in bulk solution both in practice and theory. Here, recent achievements in programming self-assembly of peptides, proteins, and peptoids at solid-liquid interfaces are summarized and corresponding applications are described. Recent advances in the physical understandings of self-assembly pathways obtained using in situ atomic force microscopy are also discussed. These advances will lead to novel strategies for designing biomaterials organized at and interfaced with inorganic surfaces.

Symbiotic assembly of peptide nano-mosaics at solid interfaces

The spontaneous co-organization of distinct biomolecules at interfaces enables many of Nature's hierarchical organizations involving both hard and soft materials. Engineering efforts to mimic such hybrid complexes rely on our ability to rationally structure biomolecules at inorganic interfaces. Control over the nanoscale structure of patterned biomolecules remains challenging due to difficulties in controlling the multifarious interactions involved. This work discusses binary peptide assembly as a means to fabricate biomolecular nano-mosaics at graphite surfaces with predictable structures. Distinct peptide-substrate interactions lead to divergent crystallographic growth directions, molecular scale immiscibility, and a symbiotic assembly phenomenon. We present a symbiotic assembly model that accurately predicts the binary assembly structure relying solely on the constituent peptide nucleation kinetics and molar fractions. The ability to tune such biomolecular nano-mosaic structures facilitates the bottom up fabrication of high-density, multifunctional interfaces for nanotechnology.

Solid-Binding Proteins: Bridging Synthesis, Assembly, and Function in Hybrid and Hierarchical Materials Fabrication

There is considerable interest in the development of hybrid organic-inorganic materials because of the potential for harvesting the unique capabilities that each system has to offer. Proteins are an especially attractive organic component owing to the high amount of chemical information encoded in their amino acid sequence, their amenability to molecular and computational (re)design, and the many structures and functions they specify. Genetic installation of solid-binding peptides (SBPs) within protein frameworks affords control over the position and orientation of adhesive and morphogenetic segments, and a path toward predictive synthesis and assembly of functional materials and devices, all while harnessing the built-in properties of the host scaffold. Here, we review the current understanding of the mechanisms through which SBPs bind to technologically relevant interfaces, with an emphasis on the variables that influence the process, and highlight the last decade of progress in the use of solid-binding proteins for hybrid and hierarchical materials synthesis.

Non-covalently embedded oxytocin in alkanethiol monolayer as Zn2+ selective biosensor

Peptides are commonly used as biosensors for analytes such as metal ions as they have natural binding preferences. In our previous peptide-based impedimetric metal ion biosensors, a monolayer of the peptide was anchored covalently to the electrode. Binding of metal ions resulted in a conformational change of the oxytocin peptide in the monolayer, which was measured using electrochemical impedance spectroscopy. Here, we demonstrate that sensing can be achieved also when the oxytocin is non-covalently integrated into an alkanethiol host monolayer. We show that ion-binding cause morphological changes to the dense host layer, which translates into enhanced impedimetric signals compared to direct covalent assembly strategies. This biosensor proved selective and sensitive for Zn2+ ions in the range of nano- to micro-molar concentrations. This strategy offers an approach to utilize peptide flexibility in monitoring their response to the environment while embedded in a hydrophobic monolayer.

Identification of Parameters Controlling Peptide-Driven Graphene Exfoliation in Aqueous Media

Bio-inspired approaches represent potentially transformational methods to fabricate and activate non-natural materials for applications ranging from biomedical diagnostics to energy harvesting platforms. Recently, bio-based methods for the exfoliation of graphene in water have been developed, resulting in peptide-capped nanosheets; however, a clear understanding of the reaction system and peptide ligand structure remains unclear, limiting the advance of such approaches. Here the effects of reaction solution conditions and peptide ligand structure were systematically examined for graphene exfoliation, identifying key parameters to optimize material production. For this, the P1 peptide, identified with affinity for graphene, was exploited to drive exfoliation of bulk graphite to generate the final materials. The peptide was modified at both the N- and C-terminus with a 10-carbon chain fatty acid to explore the effects of a hydrophobic domain on the exfoliation process. The system was examined as a function of sonication time, pH, reagent concentration, and graphite source, where the final materials were fully characterized using a suite of approaches. Collectively, these results demonstrated that maximum graphene production was achieved using the parent P1 peptide after 12 h of sonication under basic conditions. While the exfoliation efficiency was slightly lower for the fatty acid modified peptides, the graphene produced using these biomolecules had fewer defects incorporated, potentially from the wrapping of the nanosheet edge by the aliphatic domain. Such results are important to provide key reaction designs to optimize the reproducibility of graphene exfoliation using biomimetic approaches.

Self-Immobilized Putrescine Oxidase Biocatalyst System Engineered with a Metal Binding Peptide

Flavin oxidases are valuable biocatalysts for the oxidative synthesis of a wide range of compounds, while at the same time reduce oxygen to hydrogen peroxide. Compared to other redox enzymes, their ability to use molecular oxygen as an electron acceptor offers a relatively simple system that does not require a dissociable coenzyme. As such, they are attractive targets for adaptation as cost-effective biosensor elements. Their functional immobilization on surfaces offers unique opportunities to expand their utilization for a wide range of applications. Genetically engineered peptides have been demonstrated as enablers of the functional assembly of biomolecules at solid material interfaces. Once identified as having a high affinity for the material of interest, these peptides can provide a single step bioassembly process with orientation control, a critical parameter for functional immobilization of the enzymes. In this study, for the first time, we explored the bioassembly of a putrescine oxidase enzyme using a gold binding peptide tag. The enzyme was genetically engineered to incorporate a gold binding peptide with an expectation of an effective display of the peptide tag to interact with the gold surface. In this work, the functional activity and expression were investigated, along with the selectivity of the binding of the peptide-tagged enzyme. The fusion enzyme was characterized using multiple techniques, including protein electrophoresis, enzyme activity, and microscopy and spectroscopic methods, to verify the functional expression of the tagged protein with near-native activity. Binding studies using quartz crystal microbalance (QCM), nanoparticle binding studies, and atomic force microscopy studies were used to address the selectivity of the binding through the peptide tag. Surface binding AFM studies show that the binding was selective for gold. Quartz crystal microbalance studies show a strong increase in the affinity of the peptide-tagged protein over the native enzyme, while activity assays of protein bound to nanoparticles provide evidence that the enzyme retained catalytic activity when immobilized. In addition to showing selectivity, AFM images show significant differences in the height of the molecules when immobilized through the peptide tag compared to immobilization of the native enzyme, indicating differences in orientation of the bound enzyme when attached via the affinity tag. Controlling the orientation of surface-immobilized enzymes would further improve their enzymatic activity and impact diverse applications, including oxidative biocatalysis, biosensors, biochips, and biofuel production.

Material composition and peptide sequence affects biomolecule affinity to and selectivity for h-boron nitride and graphene

Nanosheet heterostructures offer emergent optical/electronic properties. These could be achieved using selective materials binding peptides, but lack of understanding of selectivity impedes advancement. Here we examine peptides with affinity for graphene or h-BN using quantitative experiments and molecular simulation to identify traits for design of 2D nanosheet selective peptides.

Thermal Selection of Aqueous Molecular Conformations for Tailored Energetics of Peptide Assemblies at Solid Interfaces

Key to the development of functional bioinorganic soft interfaces is the predictive control over the micron-scale assembly structure and energetics of biomolecules at solid interfaces. While assembly of labile biomolecules, such as short peptides, at interfaces is a great deal affected by the shape of the molecule, biomolecular conformations are prompted by external solution conditions, involving temperature, pH, and salt concentration. In this light, one can expect that the environmental conformational selection of aqueous biomolecules could potentially allow for fine-tuning of the equilibrium assembly structure at interfaces, as well as, the binding strength and molecular mobility within these assemblies. Here, we demonstrate the energetic and structural tailoring of two-dimensional surface assemblies of graphite-binding dodecapeptides, through the thermal selection of aqueous peptide conformations. Our findings based on a scanning probe energetic analysis, supplemented by molecular dynamics modeling, show that peptide-graphite and peptide-peptide intermolecular interactions strongly depend on the thermally selected molecular conformation and that the extent of the conformational change is directly related to the observed assembled structure. Enabled by these results was the design of a peptide with predictable binding and assembled structure, thus, suggesting environmental preconditioning of peptides as a means for controlling self-assembling active bioinorganic interfaces for bioelectronic implementations such as biomolecular fuel cells and biosensors.

Biomolecular Material Recognition in Two Dimensions: Peptide Binding to Graphene, h-BN, and MoS2 Nanosheets as Unique Bioconjugates

Two-dimensional nanosheet-based materials such as graphene, hexagonal boron nitride, and MoS₂ represent intriguing structures for a variety of biological applications ranging from biosensing to nanomedicine. Recent advances have demonstrated that peptides can be identified with affinity for these three materials, thus generating a highly unique bioconjugate interfacial system. This Review focuses on recent advances in the formation of bioconjugates of these types, paying particular attention to the structure/function relationship of the peptide overlayer. This is achieved through the amino acid composition of the nanosheet binding peptides, thus allowing for precise control over the properties of the final materials. Such bioconjugate systems offer rapid advances via direct property control that remain difficult to achieve for biological applications using nonbiological approaches.

Conformationally directed assembly of peptides on 2D surfaces mediated by thermal stimuli

Dynamic and environmentally directed assembly of molecules in biological systems is essential for the fabrication of micronscale, hierarchical, functional structures. Here, we demonstrate the directed assembly of genetically selected graphite binding peptides on 2D solid surfaces upon thermal stimuli. Structural and kinetic analyses as well as molecular dynamics simulations yield the self-assembly process as thermally controllable upon tuning the solvated peptide conformational states. The ability to tailor the structure of two-dimensional soft bio/nano interfaces via external stimuli shows the potential for the bottom-up fabrication of complex materials with nanotechnological importance, such as biosensors, bioelectronics, and biomolecular fuel cells.

Two-Dimensional Graphene Family Material: Assembly, Biocompatibility and Sensors Applications

Graphene and its chemically exfoliated derivatives—GO and rGO—are the key members of graphene family materials (GFM). The atomically thick crystal structure and the large continuous π conjugate of graphene imparts it with unique electrical, mechanical, optical, thermal, and chemical properties. Although those properties of GO and rGO are compromised, they have better scalability and chemical tunability. All GFMs can be subject to noncovalent modification due to the large basal plane. Besides, they have satisfying biocompatibility. Thus, GFMs are promising materials for biological, chemical and mechanical sensors. The present review summarizes how to incorporate GFMs into different sensing system including fluorescence aptamer-based sensors, field-effect transistors (FET), and electrochemical sensors, as well as, how to covalently and/or non-covalently modify GFMs to achieve various detection purpose. Sensing mechanisms and fabrication strategies that will influence the sensitivity of different sensing system are also reviewed.

Fibroin-like Peptides Self-Assembling on Two-Dimensional Materials as a Molecular Scaffold for Potential Biosensing

Self-assembled peptides have revealed uniform ordering on two-dimensional (2D) materials such as mica, graphene, and MoS₂ so far. These peptides are expected to be utilized as a molecular scaffold for biosensing based on 2D materials. However, the stability of the peptide structures on 2D materials under liquid has not been evaluated, and some of the previously reported peptides may have instability under water. In this work, by mimicking an amino-acid sequence of silk protein, we successfully developed peptide sequences that can maintain ordered nanostructures even after rinsing with deionized water. The structural stability was also proven under electrochemical bias, which is crucial as a biomolecular scaffold for practical biosensing with 2D materials. The stability probably arises from its β-sheet-like structures with improved intermolecular interactions and binding to the surface of 2D materials, resulting in the formation of stable domains of ordered peptide structures. Our peptides showed their ability to immobilize probe molecules for biosensing and inhibit nonspecific adsorption through their co-assembly process. Interestingly, we found two structural phases in the self-assembled structures, where only one of the phases reveals a binding affinity to target molecules.

Plant/Bacterial Virus-Based Drug Discovery, Drug Delivery, and Therapeutics

Viruses have recently emerged as promising nanomaterials for biotechnological applications. One of the most important applications of viruses is phage display, which has already been employed to identify a broad range of potential therapeutic peptides and antibodies, as well as other biotechnologically relevant polypeptides (including protease inhibitors, minimizing proteins, and cell/organ targeting peptides). Additionally, their high stability, easily modifiable surface, and enormous diversity in shape and size, distinguish viruses from synthetic nanocarriers used for drug delivery. Indeed, several plant and bacterial viruses (e.g., phages) have been investigated and applied as drug carriers. The ability to remove the genetic material within the capsids of some plant viruses and phages produces empty viral-like particles that are replication-deficient and can be loaded with therapeutic agents. This review summarizes the current applications of plant viruses and phages in drug discovery and as drug delivery systems and includes a discussion of the present status of virus-based materials in clinical research, alongside the observed challenges and opportunities.

Modeling the Cooperative Adsorption of Solid-Binding Proteins on Silica: Molecular Insights from Surface Plasmon Resonance Measurements

Combinatorially selected solid-binding peptides (SBPs) provide a versatile route for synthesizing advanced materials and devices, especially when they are installed within structurally or functionally useful protein scaffolds. However, their promise has not been fully realized because we lack a predictive understanding of SBP-material interactions. Thermodynamic and kinetic binding parameters obtained by fitting quartz crystal microbalance and surface plasmon resonance (SPR) data with the Langmuir model whose assumptions are rarely satisfied provide limited information on underpinning molecular interactions. Using SPR, we show here that a technologically useful SBP called Car9 confers proteins to which is fused a sigmoidal adsorption behavior modulated by partner identity, quaternary structure, and ionic strength. We develop a two-step cooperative model that accurately captures the kinetics of silica binding and provides insights into how SBP-SBP interactions, fused scaffold, and solution conditions modulate adsorption. Because cooperative binding can be converted to Langmuir adhesion by mutagenesis, our approach offers a path to identify and to better understand and design practically useful SBPs.

Experimental and theoretical tools to elucidate the binding mechanisms of solid-binding peptides

The interactions between biomolecules and solid surfaces play an important role in designing new materials and applications which mimic nature. Recently, solid-binding peptides (SBPs) have emerged as potential molecular building blocks in nanobiotechnology. SBPs exhibit high selectivity and binding affinity towards a wide range of inorganic and organic materials. Although these peptides have been widely used in various applications, there is a need to understand the interaction mechanism between the peptide and its material substrate, which is challenging both experimentally and theoretically. This review describes the main characterisation techniques currently available to study SBP-surface interactions and their contribution to gain a better insight for designing new peptides for tailored binding.

Adsorption of amino acids on graphene: assessment of current force fields

We compare the free energies of adsorption (ΔAads) and the structural preferences of amino acids on graphene obtained using the non-polarizable force fields-Amberff99SB-ILDN/TIP3P, CHARMM36/modified-TIP3P, OPLS-AA/M/TIP3P, and Amber03w/TIP4P/2005. The amino acid-graphene interactions are favorable irrespective of the force field. While the magnitudes of ΔAads differ between the force fields, the relative free energy of adsorption across amino acids is similar for the studied force fields. ΔAads positively correlates with amino acid-graphene and negatively correlates with graphene-water interaction energies. Using a combination of principal component analysis and density-based clustering technique, we grouped the structures observed in the graphene adsorbed state. The resulting population of clusters, and the conformation in each cluster indicate that the structures of the amino acid in the graphene adsorbed state vary across force fields. The differences in the conformations of amino acids are more severe in the graphene adsorbed state compared to the bulk state for all the force fields. Our findings suggest that the force fields studied will give qualitatively consistent relative strength of adsorption across proteins but different structural preferences in the graphene adsorbed state.

Building two-dimensional materials one row at a time: Avoiding the nucleation barrier

Assembly of two-dimensional (2D) molecular arrays on surfaces produces a wide range of architectural motifs exhibiting unique properties, but little attention has been given to the mechanism by which they nucleate. Using peptides selected for their binding affinity to molybdenum disulfide, we investigated nucleation of 2D arrays by molecularly resolved in situ atomic force microscopy and compared our results to molecular dynamics simulations. The arrays assembled one row at a time, and the nuclei were ordered from the earliest stages and formed without a free energy barrier or a critical size. The results verify long-standing but unproven predictions of classical nucleation theory in one dimension while revealing key interactions underlying 2D assembly.

Surface-assisted assembly of a histidine-rich lipidated peptide for simultaneous exfoliation of graphite and functionalization of graphene nanosheets

Biological molecules have promising potential to exfoliate graphite and produce biocompatible graphene nano-materials for biomedical applications. Here, a systematic design of a histidine-rich lipidated peptide sequence is presented that simultaneously exfoliates graphite flakes and functionalizes the resulting graphene nanosheets (∼150 nm lateral size) with long-term dispersion stability in aqueous solution (>8 months). The details of peptide/peptide and peptide/graphite interactions are probed using various microscopy, spectroscopy and molecular dynamics simulation methods. The results show that histidine and stearic acid interact with the graphite surface through π-π stacking and hydrophobic forces, respectively. Surface-assisted assembly of peptide molecules is then initiated via hydrogen bonds between deprotonated histidine segments, and a textured peptide nano-structure is formed. The work of adhesion between the peptide and graphite is found to be high enough to promote exfoliation of graphite flakes through layer-by-layer peeling of graphene nanosheets. The positively charged arginine in the peptide is exposed outward, and is responsible for the stable dispersion. The peptide molecules are sufficiently small, presenting the possibility to insert into and increase the spacing between the graphitic layers for enhanced exfoliation. The peptide-functionalized graphene nanosheets not only show great biocompatibility with cells in vitro, but also enhance cancer drug uptake by the cells.

Surface-Mediated Supramolecular Self-Assembly of Protein, Peptide, and Nucleoside Derivatives: From Surface Design to the Underlying Mechanism and Tailored Functions

Among the many parameters that have been explored to exercise control over self-assembly processes, the influence of surface properties on self-assembly has been recognized as important but has received considerably less attention than other factors. This is particularly true for biomolecule-derived self-assembling molecules such as protein, peptide, and nucleobase derivatives. Because of their relevance to biomaterial and drug delivery applications, interest in these materials is increasing. As the formation of supramolecular structures from these biomolecule derivatives inevitably brings them into contact with the surfaces of surrounding materials, understanding and controlling the impact of the properties of these surfaces on the self-assembly process are important. In this feature article, we present an overview of the different surface parameters that have been used and studied for the direction of the self-assembly of protein, peptide, and nucleoside-based molecules. The current mechanistic understanding of these processes will be discussed, and potential applications of surface-mediated self-assembly will be outlined.

Biomining of MoS2 with Peptide-based Smart Biomaterials

Biomining of valuable metals using a target specific approach promises increased purification yields and decreased cost. Target specificity can be implemented with proteins/peptides, the biological molecules, responsible from various structural and functional pathways in living organisms by virtue of their specific recognition abilities towards both organic and inorganic materials. Phage display libraries are used to identify peptide biomolecules capable of specifically recognizing and binding organic/inorganic materials of interest with high affinities. Using combinatorial approaches, these molecular recognition elements can be converted into smart hybrid biomaterials and harnessed for biotechnological applications. Herein, we used a commercially available phage-display library to identify peptides with specific binding affinity to molybdenite (MoS₂) and used them to decorate magnetic NPs. These peptide-coupled NPs could capture MoS₂ under a variety of environmental conditions. The same batch of NPs could be re-used multiple times to harvest MoS₂, clearly suggesting that this hybrid material was robust and recyclable. The advantages of this smart hybrid biomaterial with respect to its MoS₂-binding specificity, robust performance under environmentally challenging conditions and its recyclability suggests its potential application in harvesting MoS₂ from tailing ponds and downstream mining processes.

Electrochemical Control of Peptide Self-Organization on Atomically Flat Solid Surfaces: A Case Study with Graphite

The nanoscale self-organization of biomolecules, such as proteins and peptides, on solid surfaces under controlled conditions is an important issue in establishing functional bio/solid soft interfaces for bioassays, biosensors, and biofuel cells. Electrostatic interaction between proteins and surfaces is one of the most essential parameters in the adsorption and self-assembly of proteins on solid surfaces. Although the adsorption of proteins has been studied with respect to the electrochemical surface potential, the self-assembly of proteins or peptides forming well-organized nanostructures templated by lattice structure of the solid surfaces has not been studied in the relation to the surface potential. In this work, we utilize graphite-binding peptides (GrBPs) selected by the phage display method to investigate the relationship between the electrochemical potential of the highly ordered pyrolytic graphite (HOPG) and peptide self-organization forming long-range-ordered structures. Under modulated electrical bias, graphite-binding peptides form various ordered structures, such as well-ordered nanowires, dendritic structures, wavy wires, amorphous (disordered) structures, and islands. A systematic investigation of the correlation between peptide sequence and self-organizational characteristics reveals that the presence of the bias-sensitive amino acid modules in the peptide sequence has a significant effect on not only surface coverage but also on the morphological features of self-assembled structures. Our results show a new method to control peptide self-assembly by means of applied electrochemical bias as well as peptide design-rules for the construction of functional soft bio/solid interfaces that could be integrated in a wide range of practical implementations.

Ultrasensitive and Highly Stable Resistive Pressure Sensors with Biomaterial-Incorporated Interfacial Layers for Wearable Health-Monitoring and Human-Machine Interfaces

Flexible piezoresistive sensors have huge potential for health monitoring, human-machine interfaces, prosthetic limbs, and intelligent robotics. A variety of nanomaterials and structural schemes have been proposed for realizing ultrasensitive flexible piezoresistive sensors. However, despite the success of recent efforts, high sensitivity within narrower pressure ranges and/or the challenging adhesion and stability issues still potentially limit their broad applications. Herein, we introduce a biomaterial-based scheme for the development of flexible pressure sensors that are ultrasensitive (resistance change by 5 orders) over a broad pressure range of 0.1-100 kPa, promptly responsive (20 ms), and yet highly stable. We show that employing biomaterial-incorporated conductive networks of single-walled carbon nanotubes as interfacial layers of contact-based resistive pressure sensors significantly enhances piezoresistive response via effective modulation of the interlayer resistance and provides stable interfaces for the pressure sensors. The developed flexible sensor is capable of real-time monitoring of wrist pulse waves under external medium pressure levels and providing pressure profiles applied by a thumb and a forefinger during object manipulation at a low voltage (1 V) and power consumption (<12 μW). This work provides a new insight into the material candidates and approaches for the development of wearable health-monitoring and human-machine interfaces.

Probing nano-patterned peptide self-organisation at the aqueous graphene interface

The peptide sequence GrBP5, IMVTESSDYSSY, is found experimentally to bind to graphene, and ex situ atomic force microscopy indicates the formation of an ordered over-layer on graphite. However, under aqueous conditions neither the molecular conformations of the adsorbed peptide chains, nor the molecular-level spatial ordering of the over-layer, has been directly resolved. Here, we use advanced molecular dynamics simulations of GrBP5, and related mutant sequences, to elucidate the adsorbed structures of both the peptide and the adsorbed peptide over-layer at the aqueous graphene interface. In agreement with a previous hypothesis, we find GrBP5 binds at the aqueous graphene interface chiefly via the tyrosine-rich C-terminal region. Our simulations of the adsorbed peptide over-layers reveal that the peptide chains form an aggregate that does not evolve further into ordered patterns. Instead, we find that the inter-chain interactions are driven by hydrogen bonding and charge-charge interactions that are not sufficiently specific to support pattern formation. Overall, we suggest that the experimentally-observed over-layer pattern may be due to the drying of the sample, and may not be prevalent at the solvated interface. However, our simulations indicate sequence modifications of GrBP5 to promote over-layer ordering under aqueous conditions.