Facile synthesis of surfactant-free Au cluster/graphene hybrids for high-performance oxygen reduction reaction

Bimetallic MOF-derived three-dimensional nanoflowers PdCoOx as peroxidase mimic activity for determining total antioxidant capacity

Bimetallic MOF derivatives have shown excellent performance as nano-enzymes in the field of catalysis. Herein, PdCo oxide nanoflowers with three-dimensional flower were prepared by a simple pyrolysis method on a precursor of bimetallic PdCo-MOF. PdCoOx showed excellent peroxidase mimic activity, which could significantly promote the oxidation of TMB by H2O2. Compared with CoOx, the peroxidase mimic activity of the optimized PdCoOx-300 increased by 2.41-fold. PdCoOx-300 has high affinity for TMB and H2O2 with Km values of 0.16 mM and 2.11 mM, which are only 57.03% and 36.87% of HRP, respectively. The highly specific peroxidase mimic activity is conducive to the sensitive detection of H2O2, glucose and ascorbic acid with limit of detection of 10, 100 and 10 nM, respectively. Furthermore, the total antioxidant capacity in the actual beverage samples was conducted, which showed good anti-interference ability and recovery rate.

Direct Excitation Transfer in Plasmonic Metal-Chalcopyrite-Hybrids: Insights from Single Particle Line Shape Analysis

Hybrid nanomaterials containing both noble metal and semiconductor building blocks provide an engineerable platform for realizing direct or indirect charge and energy transfer for enhanced plasmonic photoconversion and photocatalysis. In this work, silver nanoparticles (AgNPs) and chalcopyrite (CuFeS2) nanocrystals (NCs) are combined into a AgNP@CuFeS2 hybrid structure comprising NCs embedded in a self-assembled lipid coating around the AgNP core. In AgNP@CuFeS2 hybrid structures, both metallic and semiconductor NCs support quasistatic resonances. To characterize the interactions between these resonances and their effect on potential charge and energy transfer, direct interfacial excitation transfer between the AgNP core and surrounding CuFeS2 NCs is probed through single particle line shape analysis and supporting electromagnetic simulations. These studies reveal that CuFeS2 NCs localized in the evanescent field of the central AgNP induce a broadening of the metal NP line shape that peaks when an energetic match between the AgNP and CuFeS2 NC resonances maximizes direct energy transfer. Dimers of AgNPs whose resonances exhibit poor energetic overlap with the CuFeS2 NC quasistatic resonance yield much weaker line shape broadening in a control experiment, corroborating the existence of resonant energy transfer in the AgNP@CuFeS2 hybrid. Resonant coupling between the metallic and semiconductor building blocks in the investigated hybrid architecture provides a mechanism for utilizing the large optical cross-section of the central AgNP to enhance the generation of reactive charge carriers in the surrounding semiconductor NCs for potential applications in photocatalysis.

CRISPR/Cas12a integrated electrochemiluminescence biosensor for pufferfish authenticity detection based on NiCo2O4 NCs@Au as a coreaction accelerator

Meat adulteration has brought economic losses, health risks, and religious concerns, making it a pressing global issue. Herein, combining the high amplification efficiency of polymerase chain reaction (PCR) and the accurate recognition of CRISPR/Cas12, a sensitive and reliable electrochemiluminescence (ECL) biosensor was developed for the detection of pufferfish authenticity using NiCo2O4 NCs@Au-ABEI as nanoemitters. In the presence of target DNA, the trans-cleavage activity of CRISPR/Cas12a is activated upon specific recognition by crRNA, and then it cleaves dopamine-modified single stranded DNA (ssDNA-DA), triggering the ECL signal from the "off" to "on" state. However, without target DNA, the trans-cleavage activity of CRISPR/Cas12a is silenced. By rationally designing corresponding primers and crRNA, the biosensor was applied to specific identification of four species of pufferfish. Furthermore, as low as 0.1 % (w/w) adulterate pufferfish in mixture samples could be detected. Overall, this work provides a simple, low-cost and sensitive approach to trace pufferfish adulteration.

Floatable Cu2(OH)PO4/rGO Aerogel for Full Spectrum Driven Photocatalytic Degradation of Organic Pollutants

Photocatalytic technology is an attractive option for environmental remediation because of its green and sustainable nature. However, the inefficient utilization of solar energy and powder morphology currently impede its practical application. Here, we designed a floatable photocatalyst by anchoring 0D Cu2(OH)PO4 (CHP) nanoparticles on 2D graphene to construct 0D/2D CHP/reduced graphene oxide (rGO) aerogels. The CHP/rGO aerogels have interconnected mesopores that provide a large surface area, promoting particle dispersion and increasing the number of active sites. Moreover, the optical response of the CHP/rGO aerogel has been significantly expanded to cover the full spectrum of the solar light. Notably, the 20%CHP/rGO aerogel displayed a high degradation rate (k = 0.178 min-1) taking methylene blue (MB) as a model pollutant under light irradiation (λ > 420 nm). The enhanced photocatalytic activity is ascribed to the rapid electron transfer in the CHP/rGO heterostructures, as supported by the DFT theoretical calculations. Our research highlights the utilization of full spectrum responsive photocatalysts for the elimination of organic pollutants from wastewater under solar light irradiation, as well as the potential for catalyst recovery using floatable aerogels to meet industrial requirements.

Synthesis of β-Cyclodextrin@gold Nanoparticles and Its Application on Colorimetric Assays for Ascorbic Acid and Salmonella Based on Peroxidase-like Activities

The peroxidase-like behaviors of gold nanoparticles (AuNPs) have the potential to the development of rapid and sensitive colorimetric assays for specific food ingredients and contaminants. Here, using NaBH4 as a reducing agent, AuNPs with a supramolecular macrocyclic compound β-cyclodextrin (β-CD) capped were synthesized under alkaline conditions. Monodispersal of β-CD@AuNPs possessed a reduction in diameter size and performed great peroxidase-like activities toward both substrates, H2O2 and TMB. In the presence of H2O2, the color change of TMB oxidization to oxTMB was well-achieved using β-CD@AuNPs as the catalyst, which was further employed to develop colorimetric assays for ascorbic acid, with a limit of detection as low as 0.2 μM in ddH2O. With the help of the host-guest interaction between β-CD and adamantane, AuNPs conjugated with nanobodies to exhibit peroxidase-like activities and specific recognition against Salmonella Typhimurium simultaneously. Based on this bifunctional bioprobe, a selective and sensitive one-step colorimetric assay for S. Typhimurium was developed with a linear detection from 8.3 × 104 to 2.6 × 108 CFU/mL and can be provided to spiked lettuce with acceptable recoveries of 97.31% to 103.29%. The results demonstrated that the excellent peroxidase-like behaviors of β-CD@AuNPs can be applied to develop a colorimetric sensing platform in the food industry.

Metal-phenolic networks derived CN-FeC hollow nanozyme with robust peroxidase-like activity for total antioxidant capacity detection

A tannate-iron network-derived peroxidase-like catalyst loaded with Fe ions on carbon nitride (C3N4) was reported for detection of total antioxidant capacity (TAC) in food in this study. Metal-phenolic networks (MPNs) was employed to form a low coordination compound on C3N4, and calcined catalyst formed hollow structure with abundant and uniform Fe sites and surface folds. CN-FeC exhibited significant peroxidase-like activity and high substrate affinity. The homogeneous distribution of amorphous Fe elements on the C3N4 substrate provides more active sites, resulting in provided excellent catalytic activity to activate H2O2 to ·OH, 1O2 and O2·-. The established CN-FeC/TMB/H2O2 colorimetric system can detect AA in the concentration range of 5-40 μM, with the detection limits of 1.40 μM, respectively. It has good accuracy for the detection of vitamin C tablets, beverages. Taken together, this work shows that metal-phenolic networks can be an effective way to achieve efficient utilization of metal atoms and provides a promising idea for metal-phenolic networks in nanoparticle enzyme performance enhancement.

Very Low Temperature CO Oxidation over Atomically Precise Au25 Nanoclusters on MnO2

Atomically precise Au25 nanoclusters have garnered significant interest in the field of heterogeneous catalysis due to their remarkable activity and selectivity. However, for the extensively studied reaction of low-temperature CO oxidation, their performance has not been competitive compared to other known gold nanocatalysts. To address this, we deposited Au25(SR)18 (R = CH2CH2Ph) nanoclusters onto a manganese oxide support (Au25/MnO2), resulting in a very stable and highly active catalyst. By optimizing the pretreatment temperature, we were able to significantly enhance the performance of the Au25/MnO2 catalyst, which outperformed most other gold catalysts. Impressively, 100% conversion of CO was achieved at temperatures as low as -50 °C, with 50% conversion being reached below -70 °C. Furthermore, the existence of ligands could also influence the negative apparent activation energy observed at intermediate temperatures. Analysis using X-ray photoelectron spectroscopy (XPS), scanning transmission electron microscopy (STEM), and X-ray diffraction (XRD) techniques indicated that the Au25 nanoclusters remained stable on the catalyst surface even after pretreatment at high temperatures. In-situ modulation excitation spectroscopy (MES) spectra also confirmed that the Au cluster was the active site for CO oxidation, highlighting the potential of atomically precise Au25 nanoclusters as primary active sites at very low temperatures.

Celebrating 20 Years of NCNST: Innovation in Nanoscience and Nanotechnology

With the development of nanoscience and technology, it has become an essential part of various research directions, changing our way of life, such as advanced accurate manufacturing in nanotechnology that facilitates reducing chip sizes, progress made in health care via nanoscience that provides hope to patients, and so on. As the nation's flagship institution of nanoscience and technology in China, the National Center for Nanoscience and Technology, China (NCNST), established in December 2003, has played a crucial role in promoting cutting-edge technologies in the field of nanoscience and expediting interdisciplinary fusion. With a strong research team and state-of-the-art research equipment, NCNST currently carries out frontier research and world-class technology innovation, including nanosystems and hierarchical fabrication, biological effects of nanomaterials and nanosafety, standardization and measurements for nanotechnology, as well as theoretical simulations. Serving as one of the most prestigious institutions in nanoscience and nanotechnology in China, NCNST will continue to foster impactful international cooperation, cultivate young talents, and boost inspiring innovation.

Gold nanoparticles aggregation on graphene using Reactive force field: A molecular dynamic study

We examine the aggregation behavior of AuNPs of different sizes on graphene as function of temperature using molecular dynamic simulations with Reax Force Field. In addition, the consequences of such aggregation on the morphology of AuNPs and the charge transfer behavior of AuNP-Graphene hybrid structure are analyzed. The aggregation of AuNPs on graphene is confirmed from the center of mass distance calculation. The simulation results indicate that the size of AuNPs and temperature significantly affect the aggregation behavior of AuNPs on graphene. The strain calculation showed that shape of AuNPs changes due to the aggregation and the smaller size AuNPs on graphene exhibit more shape changes than larger AuNPs at all the temperatures studies in this work. The charge transfer calculation reveals that, the magnitude of charge transfer is higher for larger AuNPs-graphene composite when compared with smaller AuNPs-graphene composite. The charge transfer trend and the trends seen in the number of Au atoms directly in touch with graphene are identical. Hence, our results conclude that, quantity of Au atoms directly in contact with graphene during aggregation is primarily facilitates charge transfer between AuNPs and graphene. Our results on the size dependent strain and charge transfer characteristics of AuNPs will aid in the development of AuNPs-graphene composites for sensor applications.

A biosensor based on Fe3O4@MXene-Au nanocomposites with high peroxidase-like activity for colorimetric and smartphone-based detection of glucose

A novel magnetic nanozyme Fe₃O₄@MXene-Au nanocomposite, which possessed higher peroxidase-like activity than that of Fe₃O₄ nanoparticles and Fe₃O₄@MXene nanocomposites, was developed. The outstanding magnetic properties of the nanozyme endowed it with the ability of simple and rapid separation, achieving great recyclability. Based on Fe₃O₄@MXene-Au nanocomposites and glucose oxidase (Glu Ox), a highly selective colorimetric biosensor for glucose detection was developed. Fe₃O₄@MXene-Au nanocomposites can catalyze H₂O₂ produced from glucose catalyzed by glucose oxidase to ·OH and oxidize colorless 3,3',5,5'-tetramethylbenzidine (TMB) to blue oxidized TMB (oxTMB) with a significant absorbance at 652 nm. The linear range of glucose was 0-1.4 mM under optimal conditions, with a limit of detection (LOD) of 0.11 mM. Glucose in human whole blood was successfully detected with satisfactory recoveries. Furthermore, a facile agarose hydrogel detection platform was designed. With smartphone software, glucose detection can be realized by the agarose hydrogel platform, demonstrating the potential in on-site and visual detection of glucose.

Particle Size-Controlled Oxygen Reduction and Evolution Reaction Nanocatalysts Regulate Ru(bpy)32+'s Dual-potential Electrochemiluminescence for Sandwich Immunoassay

Multiple signal strategies remarkably improve the accuracy and efficiency of electrochemiluminescence (ECL) immunoassays, but the lack of potential-resolved luminophore pairs and chemical cross talk hinders their development. In this study, we synthesized a series of gold nanoparticles (AuNPs)/reduced graphene oxide (Au/rGO) composites as adjustable oxygen reduction reaction and oxygen evolution reaction catalysts to promote and modulate tris(2,2'-bipyridine) ruthenium(II) (Ru(bpy)₃²⁺)'s multisignal luminescence. With the increase in the diameter of AuNPs (3 to 30 nm), their ability to promote Ru(bpy)₃²⁺'s anodic ECL was first impaired and then strengthened, and cathodic ECL was first enhanced and then weakened. Au/rGOs with medium-small and medium-large AuNP diameters remarkably increased Ru(bpy)₃²⁺'s cathodic and anodic luminescence, respectively. Notably, the stimulation effects of Au/rGOs were superior to those of most existing Ru(bpy)₃²⁺ co-reactants. Moreover, we proposed a novel ratiometric immunosensor construction strategy using Ru(bpy)₃²⁺'s luminescence promoter rather than luminophores as tags of antibodies to achieve signal resolution. This method avoids signal cross talk between luminophores and their respective co-reactants, which achieved a good linear range of 10^-7 to 10^-1 ng/ml and a limit of detection of 0.33 fg/ml for detecting carcinoembryonic antigen. This study addresses the previous scarcity of the macromolecular co-reactants of Ru(bpy)₃²⁺, broadening its application in biomaterial detection. Furthermore, the systematic clarification of the detailed mechanisms for converting the potential-resolved luminescence of Ru(bpy)₃²⁺ could facilitate an in-depth understanding of the ECL process and should inspire new designs of Ru(bpy)₃²⁺ luminescence enhancers or applications of Au/rGOs to other luminophores. This work removes some impediments to the development of multisignal ECL biodetection systems and provides vitality into their widespread applications.

Electrochemical interface based on polydopamine and gold nanoparticles/reduced graphene oxide for impedimetric detection of lung cancer cells†

The use of non-invasive approaches for monitoring therapy processes in cancer patients at late stages is truly needed. In this work, we aim to develop an electrochemical interface based on polydopamine combined with gold nanoparticles and reduced graphene oxide for impedimetric detection of lung cancer cells. Gold nanoparticles (around 75 nm) were dispersed onto reduced graphene oxide material pre-electrodeposited onto disposable fluorine doped tin oxide electrodes. The coordination between gold and carbonaceous material has somehow improved the mechanical stability of this electrochemical interface. Polydopamine was later introduced onto modified electrodes via self-polymerization of dopamine in an alkaline solution. The result has demonstrated the good adhesion and biocompatibility of polydopamine towards A-549 lung cancer cells. The presence of the two conductive materials (gold nanoparticles and reduced graphene oxide) has led to a six-times decrease in charge transfer resistance of polydopamine film. Finally, the as-prepared electrochemical interface was employed for impedimetric detection of A-549 cells. The detection limit was estimated to be only 2 cells per mL. These findings have proved the possibilities to use advanced electrochemical interfaces for point-of-care applications.

Non-invasive approaches for monitoring therapy processes in cancer patients at late stages is truly needed.

Recent Progress of Carbon Dots for Air Pollutants Detection and Photocatalytic Removal: Synthesis, Modifications, and Applications

Rapid industrialization has inevitably led to serious air pollution problems, thus it is urgent to develop detection and treatment technologies for qualitative and quantitative analysis and efficient removal of harmful pollutants. Notably, the employment of functional nanomaterials, in sensing and photocatalytic technologies, is promising to achieve efficient in situ detection and removal of gaseous pollutants. Among them, carbon dots (CDs) have shown significant potential due to their superior properties, such as controllable structures, easy surface modification, adjustable energy band, and excellent electron-transfer capacities. Moreover, their environmentally friendly preparation and efficient capture of solar energy provide a green option for sustainably addressing environmental problems. Here, recent advances in the rational design of CDs-based sensors and photocatalysts are highlighted. An overview of their applications in air pollutants detection and photocatalytic removal is presented, especially the diverse sensing and photocatalytic mechanisms of CDs are discussed. Finally, the challenges and perspectives are also provided, emphasizing the importance of synthetic mechanism investigation and rational design of structures.

Self-Strained Platinum Clusters with Finite Size: High-Performance Catalysts with CO Tolerance for PEMFCs

Strained platinum-based materials with high performance have been regarded as the most promising electrocatalysts for proton exchange membrane fuel cells (PEMFCs) recently. Herein, self-strained platinum clusters with finite size (about 1 nm) are prepared by a combining liquid- and solid-phase UV irradiation cycle strategy. It started with a fresh H₂PtCl₆ solution irradiated by UV light and then mixed with a graphitized carbon, followed by the dried mixture being subjected to UV light to generate monodispersed Pt clusters on the carbon surface. The obtained platinum clusters feature narrower size distribution and higher loading on carbon, exhibiting significantly improved activity and durability, much higher than that of the-state-of-art commercial Pt/C for the oxygen reduction reaction. More importantly, the self-strained Pt clusters display a surprising CO tolerance, which can be attributed to the unique adaptive lattice compressive strain that triggers an electron enrichment phenomenon for the Pt clusters. Therefore, this stepwise UV irradiation method solves the long-standing problem of both wide size distribution and low loading of metal clusters fabricated by one-step photochemical reduction, providing a potential route for the synthesis of other metal clusters with strained structures.

Combining metal nanoclusters and carbon nanomaterials: Opportunities and challenges in advanced nanohybrids

The development of functional materials with uniquely advanced properties lies at the core of nanoscience and nanotechnology. From the myriad possible combinations of organic and/or inorganic blocks, hybrids combining metal nanoclusters and carbon nanomaterials have emerged as highly attractive colloidal materials for imaging, sensing (optical and electrochemical) and catalysis, among other applications. While the metal nanoclusters provide extraordinary luminescent and electronic properties, the carbon nanomaterials (of zero, one or two dimensions) convey versatility, as well as unique interfacial, electronic, thermal, optical, and mechanical properties, which altogether can be put to use for the desired application. Herein, we present an overview of the field, for experts and non-experts, encompassing the basic properties of the building blocks, a systematic view of the chemical preparation routes and physicochemical properties of the hybrids, and a critical analysis of their ongoing and emerging applications. Challenges and opportunities, including directions towards green chemistry approaches, are also discussed.

Surfactant-free synthesis of fluorescent platinum nanoclusters using HEPES buffer for hypochlorous acid sensing and imaging

A surfactant-free synthesis of noble-metal nanoclusters (NMNCs) with specific function has recently remained more attractive and superior in bio-applications. Herein, by employing the weak reducibility of non-toxic HEPES, we prepared novel water-soluble fluorescent HEPES@Pt NCs by a simple surfactant-free synthesis strategy for hypochlorous acid (HClO) sensing. The as-prepared Pt NCs featured ultra-small size (∼2 nm), bright blue fluorescence, high stability and biocompatibility, and the fluorescence of the Pt NC nanoprobe can be specifically quenched with hypochlorous acid by a static quenching process. Moreover, the surfactant-free Pt NC probe displays fascinating performances for HClO sensing, including fast response to HClO, high stability and specificity, and is further applied for imaging the fluctuations of the HClO concentration in living cells with satisfactory results for the first time. Thereby, we anticipate that it is a reliable and attractive approach to develop versatile NMNCs through the surfactant-free synthesis for further applications in biological research.

Spontaneous Carbon-Support-Induced Metal Deposition

Recent investigations have demonstrated the possibility for spontaneous deposition of noble metal nanoparticles from corresponding metal ion solutions on carbon supports, in the absence of additional reductants in the experimental systems. This process is a result of a direct redox reaction between the solute metal species and the carbon materials and differs from the typical electroless plating, the latter requiring additional reducing agents or catalysts to drive the reduction reaction. Due to the diversity of the used carbon materials including both dispersed nanostructured carbons and supported electrode-like carbon materials and the different approaches to follow the process and characterize the products, these studies are scattered in the scientific literature. The aim of the present review is to put these diverse investigations in a common context and focus on the existing experimental findings, the ways to monitor and control the process, and the general concept. Some aspects that need to be further corroborated are outlined in view of the involvement of the spontaneous redox process as a practical tool for the development of new catalysts.

Tunable formaldehyde sensing properties of palladium cluster decorated graphene

The ability to tune the adsorption strength of the targeted gas on sensing materials is crucial for sensing applications. By employing first-principles calculations the adsorption and sensing properties of HCHO on small Pd n (n = 1-6) cluster decorated graphene have been systematically investigated. The adsorption energy is found to depend on the size of the Pd n cluster and can be tuned in a wide range from -0.68 eV on Pd(111) to -1.98 eV on the Pd3/graphene system. We also find that the Pd n /graphene (n = 5 and 6) systems have an appropriate adsorption energy for HCHO gas sensing. The current-voltage curves are calculated by the non-equilibrium Green's function method for the two-probe nano-sensor devices along both the armchair and zigzag directions. The devices constructed with Pd n /graphene (n = 5 and 6), having the highest absolute response over 20% at small voltages, should be applicable for HCHO detection. This work provides a theoretical basis for exploring potential applications of metal cluster decorated graphene for gas sensing.

Interfacing with Fe-N-C Sites Boosts the Formic Acid Dehydrogenation of Palladium Nanoparticles

Hierarchical micro-/mesoporous carbons with abundant Fe-N-C sites were prepared through one-step carbonization of a metal-organic framework (MOF) with sodium iron ethylenediaminetetraacetic acid [NaFe(III)EDTA], which can facilitate the nucleation and growth of ultrafine (∼1.4 nm) and highly dispersed palladium nanoparticles (Pd NPs). Interfacing Pd NPs with Fe-N-C sites has been demonstrated for the first time to boost the heterogeneous catalysis of hydrogen production from formic acid, affording an ultrahigh turnover frequency (TOF) value of 7361 h^-1 at 323 K. The robust synergistic interactions between Pd NPs and Fe-N-C sites together with the small size effects of Pd NPs are responsible for the enhanced catalytic activity.

Electrocatalysis of gold-based nanoparticles and nanoclusters

Gold (Au)-based nanomaterials, including nanoparticles (NPs) and nanoclusters (NCs), have shown great potential in many electrocatalytic reactions due to their excellent catalytic ability and selectivity. In recent years, Au-based nanostructured materials have been considered as one of the most promising non-platinum (Pt) electrocatalysts. The controlled synthesis of Au-based NPs and NCs and the delicate microstructure adjustment play a vital role in regulating their catalytic activity toward various reactions. This review focuses on the latest progress in the synthesis of efficient Au-based NP and NC electrocatalysts, highlighting the relationship between Au nanostructures and their catalytic activity. This review first discusses the parameters of Au-based nanomaterials that determine their electrocatalytic performance, including composition, particle size and architecture. Subsequently, the latest electrocatalytic applications of Au-based NPs and NCs in various reactions are provided. Finally, some challenges and opportunities are highlighted, which will guide the rational design of Au-based NPs and NCs as promising electrocatalysts.

Design of Hybrid Zeolitic Imidazolate Framework-Derived Material with C-Mo-S Triatomic Coordination for Electrochemical Oxygen Reduction

The emergence of Mo-based hybrid zeolitic imidazolate frameworks (HZIFs) with MoO₄ units brings substantial advantages to design and synthesize complex Mo-based electrocatalyst that are not expected in their conventional synthesis path. Herein, as a newly proposed concept, a facile temperature-induced on-site conversion approach (TOCA) is developed to realize the transformation of MoO₄ units to C-Mo-S triatomic coordination in hierarchical hollow architecture. The optimized hybrid (denoted as MoCS_x 1000) shows accelerating oxygen reduction reaction (ORR) kinetics and excellent stability, which are superior to the most reported Mo-based catalysts. Extended X-ray adsorption fine structure (EXAFS) analysis and computational studies reveal that the near-range electronic steering at C-Mo-S triatomic-coordinated nanointerface guarantees moderate ORR intermediates adsorption and thus is responsible for the boosted ORR activity. This work sheds light on exploring the intrinsic activity of catalysts by interfacial electronic steering.

Oxygenated functional group-driven spontaneous fabrication of Pd nanoparticles decorated porous carbon nanosheets for electrocatalytic hydrodechlorination of 4-chlorophenol

Researchers have been committed to reducing the hazardous pollutants by developing efficient catalysts while ignoring the pollution caused by the use of toxic surface capping agents, reductants and/or organic solvents in the catalyst preparation process. To alleviate such problems, we here report a novel one-step oxygenated functional group-driven electroless deposition strategy to synthesize clean and uniformly distributed Pd nanoparticles (NPs) using porous carbon nanosheets (PCN) as both substrates and reducing agents. It is observed that the oxygenated functional groups enriched PCN possesses a low work function and allows the spontaneous reduction of PdCl₄^2- ions to Pd NPs deposited on the PCN support (Pd/PCN). The particle size of Pd NPs can be flexibly modulated by simply controlling the immersing time and thereby their maximum catalytic performances can be achieved. Specifically, the optimal Pd/PCN-08 with a Pd loading of 3.0 wt% shows an excellent activity with a turnover frequency of 0.38 min^-1 for electrocatalytic hydrodechlorination (ECH) of 4-chlorophenol (4-CP), superior to the previously reported materials. The stability of Pd/PCN-08 for 4-CP ECH is impressive in repetitive cycles. This work proposes a facile and efficient strategy to synthesize high-performance catalysts for detoxifying the hazardous organic pollutants.

Silver decorated 2D nanosheets of GO and MoS2serve as nanocatalyst for water treatment and antimicrobial applications as ascertained with molecular docking evaluation

In this work, synthesis of graphene oxide (GO) and reduced graphene oxide (rGO) was realized through a modified Hummers route. Different concentrations (5 and 10 wt%) of Ag were doped in MoS₂and rGO using a hydrothermal technique. Synthesized Ag-MoS₂and Ag-rGO were evaluated through XRD that confirmed the hexagonal structure of MoS₂along with the transformation of GO to Ag-rGO as indicated by a shift in XRD peaks while Mo-O bonding and S=O functional groups were confirmed with FTIR. Morphological information of GO and formation of MoS₂nanopetals as well as interlayer spacing were verified through FESEM and HRTEM respectively. Raman analysis was employed to probe any evidence regarding defect densities of GO. Optical properties of GO, MoS₂, Ag-rGO, and Ag-MoS₂were visualized through UV-vis and PL spectroscopy. Prepared products were employed as nanocatalysts to purify industrial wastewater. Experimental results revealed that Ag-rGO and Ag-MoS₂showed 99% and 80% response in photocatalytic activity. Besides, the nanocatalyst (Ag-MoS₂and Ag-rGO) exhibited 6.05 mm inhibition zones againstS. aureusgram positive (G+) and 3.05 mm forE. coligram negative (G-) in antibacterial activity. To rationalize biocidal mechanism of Ag-doped MoS₂NPs and Ag-rGO,in silicomolecular docking study was employed for two enzymes i.e.β-lactamase and D-alanine-D-alanine ligase B (ddlB) from cell wall biosynthetic pathway and enoyl-[acylcarrier-protein] reductase (FabI) from fatty acid biosynthetic pathway belonging toS. aureus. The present study provides evidence for the development of cost-effective, environment friendly and viable candidate for photocatalytic and antimicrobial applications.

Au101-rGO nanocomposite: immobilization of phosphine-protected gold nanoclusters on reduced graphene oxide without aggregation

Graphene supported transition metal clusters are of great interest for potential applications, such as catalysis, due to their unique properties. In this work, a simple approach to deposit Au₁₀₁(PPh₃)₂₁Cl₅ (Au₁₀₁NC) on reduced graphene oxide (rGO) via an ex situ method is presented. Reduction of graphene oxide at native pH (pH ≈ 2) to rGO was performed under aqueous hydrothermal conditions. Decoration of rGO sheets with controlled content of 5 wt% Au was accomplished using only pre-synthesised Au₁₀₁NC and rGO as precursors and methanol as solvent. High resolution scanning transmission electron microscopy indicated that the cluster size did not change upon deposition with an average diameter of 1.4 ± 0.4 nm. It was determined that the rGO reduction method was crucial to avoid agglomeration, with rGO reduced at pH ≈ 11 resulting in agglomeration. X-ray photoelectron spectroscopy was used to confirm the deposition of Au₁₀₁NCs and show the presence of triphenyl phosphine ligands, which together with attenuated total reflectance Fourier transform infrared spectroscopy, advocates that the deposition of Au₁₀₁NCs onto the surface of rGO was facilitated via non-covalent interactions with the phenyl groups of the ligands. Inductively coupled plasma mass spectrometry and thermogravimetric analysis were used to determine the gold loading and both agree with a gold loading of ca. 4.8-5 wt%. The presented simple and mild strategy demonstrates that good compatibility between size-specific phosphine protected gold clusters and rGO can prevent aggregation of the metal clusters. This work contributes towards producing an agglomeration-free synthesis of size-specific ligated gold clusters on rGO that could have wide range of applications.

Hybrid Graphene-Gold Nanoparticle-based Nucleic Acid Conjugates for Cancer-Specific Multimodal Imaging and Combined Therapeutics

Nanoparticle-based nucleic acid conjugates (NP-NACs) hold great promise for theragnostic (diagnostic and therapeutic) applications. However, several limitations have hindered the realization of their full potential in the clinical treatment of cancer and other diseases. In diagnosis, NP-NACs, combined with conventional optical sensing systems, have been applied for cancer detection in vitro, but low signal-to-noise ratios limit their broad in vivo applications. Meanwhile, the efficiency of NP-NAC-mediated cancer therapies has been limited through the adaptation of alternative pro-survival pathways in cancer cells. The recent emergence of personalized and precision medicine has outlined the importance of both accurate diagnosis and efficient therapeutics in a single platform. As such, we report the controlled assembly of hybrid graphene oxide/gold nanoparticle-based cancer-specific NACs (Au@GO NP-NACs) for multimodal imaging and combined therapeutics. Our developed Au@GO NP-NACs shows excellent surface-enhanced Raman scattering (SERS)-mediated live-cell cancer detection and multimodal synergistic cancer therapy through the use of photothermal, genetic, and chemotherapeutic strategies. Synergistic and selective killing of cancer cells were then demonstrated by using in vitro microfluidic models and nine different cancer cell lines by further incorporating near-infrared photothermal hyperthermia, a Topoisomerase II anti-cancer drug, and cancer targeting peptides. Moreover, with distinctive advantages of the Au@GO NP-NACs for cancer theragnostics, we further demonstrated precision cancer treatment through the detection of cancer cells in vivo using SERS followed by efficient ablation of the tumor. Therefore, our Au@GO NP-NACs could pave a new road for the advanced theragnostics of cancer as well as many other diseases.

Oxygenated functional group-engaged electroless deposition of ligand-free silver nanoparticles on porous carbon for efficient electrochemical non-enzymatic H2O2 detection

The construction of metal-carbon nanostructures with enhanced performances using traditional methods, such as pyrolysis, photolysis, impregnation-reduction, etc., generally requires additional energy input, reducing agents and capping ligands, which inevitably increase the manufacturing cost and environmental pollution. Herein, a novel one-step substrate-induced electroless deposition (SIED) strategy is developed to synthesize ligand-free Ag NPs supported on porous carbon (PC) (Ag/PC). The PC matrix enriched with oxygenated functional groups has a low work function and thus a low redox potential compared to that of Ag+ ions, which induces the auto-reduction of Ag+ ions to Ag NPs. The as-synthesized Ag/PC-6 modified electrode can be used as an excellent nonenzymatic H2O2 sensor with a broad linear range of 0.001-20 mM, a low detection limit of 0.729 μM (S/N = 3), and a high response sensitivity of 226.9 μA mM-1 cm-2, outperforming most of the reported sensor materials. Moreover, this electrode can be applied to detect trace amounts of H2O2 in juice and milk samples below the permitted residual level in food packaging and the recovery of H2O2 is 99.6% in blood serum (10%) with good reproducibility. This study proposes an efficient approach for synthesizing a highly active supported Ag electrocatalyst, which shows significant potential for practical applications.

Surfactant-Free Synthesis of Ultrafine Pt Nanoparticles on MoS2 Nanosheets as Bifunctional Catalysts for the Hydrodeoxygenation of Bio-Oil

Hydrodeoxygenation (HDO) of bio-oil is a crucial step for improving the bio-fuel quality, but developing highly dispersed Pt-based catalysts with high selectivity for target alkanes remains a great challenge. This study presents a fast surfactant-free method to prepare the MoS₂-supported Pt catalyst for HDO. Ultrafine Pt nanoparticles with sizes of <5 nm can be readily grown on chemically exfoliated MoS₂ nanosheets (NSs) via the direct microwave-assisted thermal reduction. The obtained Pt NPs/MoS₂ composites show excellent catalytic performance in the conversion of palmitic acid, and the best selectivity (also the yield) of hexadecane and pentadecane is 80.56 and 19.43%, respectively.

Ligand-regulated self-assembly of luminescent Au nanoparticles towards diverse controllable superstructures

Only using one type of amphiphilic block copolymers as a template, we present a facile and robust approach to in situ fabricate a series of brightly emitting Au nano-assemblies with high controllability and tunability. Simply by altering thiol ligands, the Au nano-assemblies display diverse superstructures including fibers, vesicles, and honeycombs.

Tin disulfide-graphene oxide-β-cyclodextrin mediated electro-oxidation of melatonin hormone: an efficient platform for electrochemical sensing

Here, we have developed an electrochemical sensor based on integrated 2D materials including tin disulfide (SnS2) nanoflakes, graphene oxide (GO), and β-cyclodextrin (β-CD) forming a ternary nanocomposite decorated on a screen-printed electrode (SPE) for the electrochemical detection of melatonin. Hydrothermally synthesized SnS2 was mixed with GO/β-CD to prepare the ternary composite via an ultra-sonication process. The nanocomposite was characterized using X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and field emission transmission electron microscopy (FEG-TEM). The electrochemical performance of the modified electrode was investigated using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and differential pulse voltammetry (DPV). The electrochemical sensor exhibited a linearity range from 1 nM to 100 μM with the lowest detection limit of 0.17 nM. The sensor was successfully applied for the detection of melatonin in commercial drugs and human saliva, which showed a consistent result with the Enzyme-Linked Immuno-Sorbent Assay (ELISA).

Realising the electrochemical stability of graphene: scalable synthesis of an ultra-durable platinum catalyst for the oxygen reduction reaction

Creating effective and stable catalyst nanoparticle-coated electrodes that can withstand extensive cycling is a current roadblock in realising the potential of polymer electrolyte membrane fuel cells. Graphene has been proposed as an ideal electrode support material due to its corrosion resistance, high surface area and high conductivity. However, to date, graphene-based electrodes suffer from high defect concentrations and non-uniform nanoparticle coverage that negatively affects performance; moreover, production methods are difficult to scale. Herein we describe a scalable synthesis for Pt nanoparticle-coated graphene whereby PtCl₂ is reduced directly by negatively charged single layer graphene sheets in solution. The resultant nanoparticles are of optimal dimensions and can be uniformly dispersed, yielding high catalytic activity, remarkable stability, and showing a much smaller decrease in electrochemical surface area compared with an optimised commercial catalyst over 30 000 cycles. The stability is rationalised by identical location TEM which shows minimal nanoparticle agglomeration and no nanoparticle detachment.

Low-Noble-Metal-Loading Hybrid Catalytic System for Oxygen Reduction Utilizing Reduced-Graphene-Oxide-Supported Platinum Aligned with Carbon-Nanotube-Supported Iridium

Hybrid systems composed of the reduced graphene oxide-supported platinum and multiwalled carbon nanotube-supported iridium (both noble metals utilized at low loadings on the level of 15 and ≤2 µg cm−2, respectively) were considered as catalytic materials for the reduction of oxygen in acid media (0.5-mol dm−3 H2SO4). The electrocatalytic activity toward reduction of oxygen and formation of hydrogen peroxide intermediate are tested using rotating ring–disk electrode (RRDE) voltammetric experiments. The efficiency of the proposed catalytic systems was also addressed by performing galvanodynamic measurements with gas diffusion electrode (GDE) half-cell at 80 °C. The role of carbon nanotubes is to improve charge distribution at the electrocatalytic interface and facilitate the transport of oxygen and electrolyte in the catalytic systems by lowering the extent of reduced graphene oxide restacking during solvent evaporation. The diagnostic electrochemical experiments revealed that—in iridium-containing systems—not only higher disk currents, but also somehow smaller ring currents are produced (when compared to the Ir-free reduced graphene oxide-supported platinum), clearly implying formation of lower amounts of the undesirable hydrogen peroxide intermediate. The enhancement effect originating from the addition of traces of iridium (supported onto carbon nanotubes) to platinum, utilized at low loading, may originate from high ability of iridium to induce decomposition of the undesirable hydrogen peroxide intermediate.

Microwave-Assisted Synthesis of ZnO-rGO Core-Shell Nanorod Hybrids with Photo- and Electro-Catalytic Activity

The unique two-dimensional structure and surface chemistry of reduced graphene oxide (rGO) along with its high electrical conductivity can be exploited to modify the electrochemical properties of ZnO nanoparticles (NPs). ZnO-rGO nanohybrids can be engineered in a simple new two-step synthesis, which is both fast and energy-efficient. The resulting hybrid materials show excellent electrocatalytic and photocatalytic activity. The structure and composition of the as-prepared bare ZnO nanorods (NRs) and the ZnO-rGO hybrids have been extensively characterised and the optical properties subsequently studied by UV/Vis spectroscopy and photoluminescence (PL) spectroscopy (including decay lifetime measurements). The photocatalytic degradation of Rhodamine B (RhB) dye is enhanced using the ZnO-rGO hybrids as compared to bare ZnO NRs. Furthermore, potentiometry comparing ZnO and ZnO-rGO electrodes reveals a featureless capacitive background for an Ar-saturated solution whereas for an O₂ -saturated solution a well-defined redox peak was observed using both electrodes. The change in reduction potential and significant increase in current density demonstrates that the hybrid core-shell NRs possess remarkable electrocatalytic activity for the oxygen reduction reaction (ORR) as compared to NRs of ZnO alone.

Gold nanoclusters as electrocatalysts: size, ligands, heteroatom doping, and charge dependences

To establish an ultimate energy conversion system consisting of a water-splitting photocatalyst and a fuel cell, it is necessary to further increase the efficiencies of the hydrogen evolution reaction (HER), the oxygen evolution reaction (OER), and the oxygen reduction reaction (ORR). Recently, it was demonstrated that thiolate (SR)-protected gold clusters, Aun(SR)m, and their related alloy clusters can serve as model catalysts for these three reactions. However, as the previous data have been obtained under different experimental conditions, it is difficult to use them to gain a deep understanding of the means to attain higher activity in these reactions. Herein, we measured the HER, OER, and ORR activities of Aun(SR)m and alloy clusters containing different numbers of constituent atoms, ligand functional groups, and heteroatom species under identical experimental conditions. We obtained a comprehensive set of results that illustrates the effect of each parameter on the activities of the three reactions. Comparison of the series of results revealed that decreasing the number of constituent atoms in the cluster, decreasing the thickness of the ligand layer, and substituting Au with Pd improve the activities in all reactions. Taking the stability of the cluster into consideration, [Au24Pd(PET)18]0 (PET = 2-phenylethanethiolate) can be considered as a metal cluster with high potential as an HER, OER, and ORR catalyst. These findings are expected to provide clear design guidelines for the development of highly active HER, OER, and ORR catalysts using Aun(SR)m and related alloy clusters, which would allow realization of an ultimate energy conversion system.

Preparation and Application of Bismuth/MXene Nano-Composite as Electrochemical Sensor for Heavy Metal Ions Detection

A nano-form composite of MXenes (Ti₃C₂T_x, T_x = -O, -OH, -F) was synthesized through depositing bismuth-nanoparticle (BiNPs) onto Ti₃C₂T_x sheets. Because of the preventive effect of the two-dimensional layered structure of Ti₃C₂T_x, the nanoparticles of Bi were uniform and well attached on the Ti₃C₂T_x. The obtained BiNPs/Ti₃C₂T_x nano-composite was applied for sensors construction of electrochemical detecting of Pb²⁺ and Cd²⁺ heavy metal ions. The produced BiNPs@Ti₃C₂T_x-based sensor showed high effective surface area and excellent conductivity. Also, the BiNPs were efficient for anodic-stripping voltammetric to detect heavy metal ions. After conditions optimization, the BiNPs@Ti₃C₂T_x nano-sensor could detect Pb²⁺ and Cd²⁺ simultaneously and the detection limits were 10.8 nM for Pb²⁺ and 12.4 nM for Cd²⁺. The BiNPs@Ti₃C₂T_x was promising for detecting heavy metal ions due to their high surface area, fast electron-transfer ability, environmental friendliness, and facial preparation.