Synthesis of long T₁ silicon nanoparticles for hyperpolarized ²⁹Si magnetic resonance imaging

Dynamic Nuclear Polarization of Selectively 29Si-Enriched Core@shell Silica Nanoparticles

²⁹Si silica nanoparticles (SiO₂ NPs) are promising magnetic resonance imaging (MRI) probes that possess advantageous properties for in vivo applications, including suitable biocompatibility, tailorable properties, and high water dispersibility. Dynamic nuclear polarization (DNP) is used to enhance ²⁹Si MR signals via enhanced nuclear spin alignment; to date, there has been limited success employing DNP for SiO₂ NPs due to the lack of endogenous electronic defects that are required for the process. To create opportunities for SiO₂-based ²⁹Si MRI probes, we synthesized variously featured SiO₂ NPs with selective ²⁹Si isotope enrichment on homogeneous and core@shell structures (shell thickness: 10 nm, core size: 40 nm), and identified the critical factors for optimal DNP signal enhancement as well as the effective hyperpolarization depth when using an exogenous radical. Based on the synthetic design, this critical factor is the proportion of ²⁹Si in the shell layer regardless of core enrichment. Furthermore, the effective depth of hyperpolarization is less than 10 nm between the surface and core, which demonstrates an approximately 40% elongated diffusion length for the shell-enriched NPs compared to the natural abundance NPs. This improved regulation of surface properties facilitates the development of isotopically enriched SiO₂ NPs as hyperpolarized contrast agents for in vivo MRI.

Electroplated waveguides to enhance DNP and EPR spectra of silicon and diamond particles

Electroplating the waveguide of a 7 T polarizer in a simple innovative way increased microwave power delivered to the sample by 3.1 dB. Silicon particles, while interesting for hyperpolarized MRI applications, are challenging to polarize due to inefficient microwave multipliers at the electron Larmor frequency at high magnetic fields and fast electronic relaxation times. Improving microwave transmission directly translates to more efficient EPR excitation at high-field, low-temperature conditions and promises faster and higher 29 Si polarization buildup through dynamic nuclear polarization (DNP).

29Si Isotope-Enriched Silicon Nanoparticles for an Efficient Hyperpolarized Magnetic Resonance Imaging Probe

Silicon particles have garnered attention as promising biomedical probes for hyperpolarized ²⁹Si magnetic resonance imaging and spectroscopy. However, due to the limited levels of hyperpolarization for nanosized silicon particles, microscale silicon particles have primarily been the focus of dynamic nuclear polarization (DNP) applications, including in vivo magnetic resonance imaging (MRI). To address these current challenges, we developed a facile synthetic method for partially ²⁹Si-enriched porous silicon nanoparticles (NPs) (160 nm) and examined their usability in hyperpolarized ²⁹Si MRI agents with enhanced signals in spectroscopy and imaging. Hyperpolarization characteristics, such as the build-up constant, the depolarization time (T₁), and the overall enhancement of the ²⁹Si-enriched silicon NPs (10 and 15%), were thoroughly investigated and compared with those of a naturally abundant NP (4.7%). During optimal DNP conditions, the 15% enriched silicon NPs showed more than 16-fold higher enhancements─far beyond the enrichment ratio─than the naturally abundant sample, further improving the signal-to-noise ratio in in vivo ²⁹Si MRI. The ²⁹Si-enriched porous silicon NPs used in this work are potentially capable to serve as drug-delivery vehicles in addition to hyperpolarized ²⁹Si in vivo, further enabling their potential future applicability as a theragnostic platform.

Molecular Silicon Clusters

The continuously decreasing size of device features in microelectronics draws growing attention to the structuring of silicon at the molecular level with powerful tools provided by synthetic chemistry. Silicon clusters are of particular importance in this regard not only as potential precursors for silicon deposition but also as well-defined model systems for bulk and surfaces of silicon at the nanoscale as well as possible starting points for future construction of molecularly precise device structures. This review aims to give a comprehensive overview about the state of the art in the synthesis of molecular silicon clusters, which are grouped into (1) electron-precise saturated clusters, (2) soluble polyhedral Zintl anions, and (3) unsaturated silicon clusters, the so-called siliconoids. Particular attention is paid to functionalization as it is generally considered a necessary prerequisite for the design and construction of more extended systems. The interrelations between the three different classes of molecular silicon clusters, e.g., arising from the introduction of negatively charged functional groups, are highlighted on grounds of NMR properties and computed electronic structures.

A Review on Metastable Silicon Allotropes

Diamond cubic silicon is widely used for electronic applications, integrated circuits, and photovoltaics, due to its high abundance, nontoxicity, and outstanding physicochemical properties. However, it is a semiconductor with an indirect band gap, depriving its further development. Fortunately, other polymorphs of silicon have been discovered successfully, and new functional allotropes are continuing to emerge, some of which are even stable in ambient conditions and could form the basis for the next revolution in electronics, stored energy, and optoelectronics. Such structures can lead to some excellent features, including a wide range of direct or quasi-direct band gaps allowed efficient for photoelectric conversion (examples include Si-III and Si-IV), as well as a smaller volume expansion as lithium-battery anode material (such as Si₂₄, Si₄₆, and Si₁₃₆). This review aims to give a detailed overview of these exciting new properties and routes for the synthesis of novel Si allotropes. Lastly, the key problems and the developmental trends are put forward at the end of this article.

Dynamic Nuclear Polarization of Silicon Carbide Micro- and Nanoparticles

Two dominant crystalline phases of silicon carbide (SiC): α-SiC and β-SiC, differing in size and chemical composition, were investigated regarding their potential for dynamic nuclear polarization (DNP). ²⁹Si nuclei in α-SiC micro- and nanoparticles with sizes ranging from 650 nm to 2.2 μm and minimal oxidation were successfully hyperpolarized without the use of free radicals, while β-SiC samples did not display appreciable degrees of polarization under the same polarization conditions. Long T₁ relaxation times in α-SiC of up to 1600 s (∼27 min) were recorded for the ²⁹Si nuclei after 1 h of polarization at a temperature of 4 K. Interestingly, these promising α-SiC particles allowed for direct hyperpolarization of both ²⁹Si and ¹³C nuclei, resulting in comparably strong signal amplifications. Moreover, the T₁ relaxation time of ¹³C nuclei in 750 nm-sized α-SiC particles was over 33 min, which far exceeds T₁ times of conventional ¹³C DNP probes with values in the order of 1-2 min. The present work demonstrates the feasibility of DNP on SiC micro- and nanoparticles and highlights their potential as hyperpolarized magnetic resonance imaging agents.

Spin-Dependent Phenomena in Semiconductor Micro-and Nanoparticles—From Fundamentals to Applications

The present overview of spin-dependent phenomena in nonmagnetic semiconductor microparticles (MPs) and nanoparticles (NPs) with interacting nuclear and electron spins is aimed at covering a gap between the basic properties of spin behavior in solid-state systems and a tremendous growth of the experimental results on biomedical applications of those particles. The first part of the review represents modern achievements of spin-dependent phenomena in the bulk semiconductors from the theory of optical spin orientation under indirect optical injection of carriers and spins in the bulk crystalline silicon (c-Si)—via numerous insightful findings in the realm of characterization and control through the spin polarization—to the design and verification of nuclear spin hyperpolarization in semiconductor MPs and NPs for magnetic resonance imaging (MRI) diagnostics. The second part of the review is focused on the electron spin-dependent phenomena in Si-based nanostructures, including the photosensitized generation of singlet oxygen in porous Si and design of Si NPs with unpaired electron spins as prospective contrast agents in MRI. The experimental results are analyzed by considering both the quantum mechanical approach and several phenomenological models for the spin behavior in semiconductor/molecular systems. Advancements and perspectives of the biomedical applications of spin-dependent properties of Si NPs for diagnostics and therapy of cancer are discussed.

Synthesis of PEG-grafted boron doped Si nanocrystals

Silicon nanocrystals are intriguing materials for biomedical imaging applications because of their unique optical properties and biological compatibility. We report a new surface functionalization route to synthesize biological buffer soluble and colloidally stable silicon nanocrystals, which is enabled by surface boron doping. Harnessing the distinctive Lewis acidic boron surface sites, postsynthetic modifications of plasma synthesized boron doped nanocrystals were carried out with polyethylene glycol (PEG-OH) ligands in dimethyl sulfoxide under photochemical conditions. The influence of PEG concentration, PEG molecular weight, and boron doping percentage on the nanocrystal solubility in a biological buffer has been investigated. The boron doping facilitates the surface functionalization via two probable pathways, by providing excellent initial dispersiblity in polar solvents and providing available acidic boron surface sites for bonding. These boron doped silicon nanocrystals have nearly identical absorption features as intrinsic silicon nanocrystals, indicating that they are promising candidates for biological imaging applications.

One-Step Synthesis of Epoxy Group-Terminated Organosilica Nanodots: A Versatile Nanoplatform for Imaging and Eliminating Multidrug-Resistant Bacteria and Their Biofilms

Multidrug-resistant bacteria (MRB) and their biofilms, both of which develop high levels of drug tolerance, cause severe threats to global health. This study demonstrates that biocompatible fluorescent silicon-containing nanodots can be a multifunctional platform for simultaneously imaging and eliminating MRB and their biofilms. Ultrasmall epoxy group (oxirane)-functionalized organosilica nanodots (OSiNDs) with a high photoluminescence quantum yield of ≈31% are synthesized via a simple one-step hydrothermal treatment of an epoxy group-containing silane molecule, 3-glycidoxypropyltrimethoxysilane, and an organic dye, rose bengal. The resultant OSiNDs can be employed as a universal imaging reagent for visualizing various bacteria/biofilms, including MRB and their biofilms. Moreover, the epoxy group-terminated OSiNDs can be conjugated with amine-containing reagents only via the simple stirring of the mixtures at an elevated temperature (e.g., 60 °C) for several hours (e.g., 3 h) without the addition of activating reagents. The amine-containing antibiotic vancomycin (Van) can thus be easily conjugated with the OSiNDs, and the obtained OSiNDs-Van can successfully inhibit the growth of MRB and even eliminate their biofilms. Collectively, the present work may give new impetus to the development of novel antibacterial and anti-biofilm agents for overcoming the drug resistance of bacteria.

Preparation of a Ruthenium-Complex-Functionalized Two-Photon-Excited Red Fluorescence Silicon Nanoparticle Composite for Targeted Fluorescence Imaging and Photodynamic Therapy in Vitro

Silicon nanoparticles (SiNPs), especially those emitting red fluorescence, have been widely applied in the field of bioimaging. However, harsh synthetic conditions and strong biological autofluorescence caused by short wavelength excitation restrict the further development of SiNPs in the field of biological applications. Here, we report a method for synthesizing a ruthenium-complex-functionalized two-photon-excited red fluorescence silicon nanoparticle composite (SiNPs-Ru) based on fluorescence resonance energy transfer under mild experimental conditions. In the prepared SiNPs-Ru composite, silicon nanoparticles synthesized by atmospheric pressure microwave-assisted synthesis served as a fluorescence energy donor, which had two-photon fluorescence properties, and tris(4,4'-dicarboxylic acid-2,2-bipyridyl)ruthenium(II) dichloride (L_Ru) acted as a fluorescence energy acceptor, which could emit red fluorescence as well as had the ability to produce singlet-oxygen for photodynamic therapy. Therefore, the synthesized SiNPs-Ru could emit red fluorescence by two-photon excitation based on fluorescence resonance energy transfer, which could effectively avoid the interference of biological autofluorescence. Fluorescence imaging tests in zebrafish and nude mice indicated that the as-prepared SiNPs-Ru could act as a new kind of fluorescence probe for fluorescence imaging in vivo. By coupling folic acid (FA) to SiNPs-Ru, the prepared composite (FA-SiNPs-Ru) could not only serve as a targeted two-photon fluorescence imaging probe but also kill cancer cells via photodynamic therapy in vitro.

Phase-Encoded Hyperpolarized Nanodiamond for Magnetic Resonance Imaging

Surface-functionalized nanomaterials are of interest as theranostic agents that detect disease and track biological processes using hyperpolarized magnetic resonance imaging (MRI). Candidate materials are sparse however, requiring spinful nuclei with long spin-lattice relaxation (T1) and spin-dephasing times (T2), together with a reservoir of electrons to impart hyperpolarization. Here, we demonstrate the versatility of the nanodiamond material system for hyperpolarized 13C MRI, making use of its intrinsic paramagnetic defect centers, hours-long nuclear T1 times, and T2 times suitable for spatially resolving millimeter-scale structures. Combining these properties, we enable a new imaging modality, unique to nanoparticles, that exploits the phase-contrast between spins encoded with a hyperpolarization that is aligned, or anti-aligned with the external magnetic field. The use of phase-encoded hyperpolarization allows nanodiamonds to be tagged and distinguished in an MRI based on their spin-orientation alone, and could permit the action of specific bio-functionalized complexes to be directly compared and imaged.

Facile synthesis of Silicon quantum dot-Gadolinium: A potential fluorescent/T1-T2 multimodal imaging agent

Highly stable and multifunctional fluorescent quantum dots are particularly attractive in practical applications. Here, a new kind of ultra-small-sized silicon quantum dot-gadolinium (SiQD-Gd) was successfully fabricated by a newly-designed facile hydrothermal growth and chelating method. The obtained SiQD-Gd exhibited outstanding water dispersibility, stability and good fluorescent property with the quantum yield of 11.6%. SiQD-Gd displayed a low cytotoxicity in normal cell lines (HELF, HEK293F) and tumor cell lines (H1299, A549). Meanwhile, SiQD-Gd showed excellent magnetic resonance response with r₁ relaxation rate of 10.5 mmol L^-1·s^-1 and r₂ relaxation rate of 47.5 mmol L^-1·s^-1, which are 2.5 and 7.4 times enhanced comparing to that of the commercial MR agent Magnevist. In vivo studies showed significant contrast enhancement effect of its T₁- and T₂-weighted MR imaging. In addition, in vivo fluorescent imaging for mice and zebrafish indicated its potential applications in fluorescent tracking. Thus, the excellent multimodal imaging capacity and biocompatibility of SiQD-Gd make it a potential imaging agent for clinic applications.

Microwave plasma-assisted silicon nanoparticles: cytotoxic, molecular, and numerical responses against cancer cells

Silicon nanoparticles (SiNPs), which have a special place in material science due to their strong luminescent property and wide applicability in various physicochemical arenas synthesised via a microwave plasma-assisted process using an argon–silane mixture.

Nanomedicines guided nanoimaging probes and nanotherapeutics for early detection of lung cancer and abolishing pulmonary metastasis: Critical appraisal of newer developments and challenges to clinical transition

Lung cancer (LC) is the second most prevalent type of cancer and primary cause of mortality among both men and women, worldwide. The most commonly employed diagnostic modalities for LC include chest X-ray (CXR), magnetic-resonance-imaging (MRI), computed tomography (CT-scan), and fused-positron-emitting-tomography-CT (PET-CT). Owing to several limitations associated with the use of conventional diagnostic tools such as radiation burden to the patient, misleading diagnosis ("missed lung cancer"), false staging and low sensitivity and resolution, contemporary diagnostic regimen needed to be employed for screening of LC. In recent decades, nanotechnology-guided interventions have been transpired as emerging nanoimaging probes for detection of LC at advanced stages, while producing signal amplification, better resolution for surface and deep tissue imaging, and enhanced translocation and biodistribution of imaging probes within the cancerous tissues. Besides enormous potential of nanoimaging probes, nanotechnology-based advancements have also been evidenced for superior efficacy for treatment of LC and abolishing pulmonary metastasis (PM). The success of nanotherapeutics is due to their ability to maximise translocation and biodistribution of anti-neoplastic agents into the tumor tissues, improve pharmacokinetic profiles of anti-metastatic agents, optimise target-specific drug delivery, and control release kinetics of encapsulated moieties in target tissues. This review aims to overview and critically discuss the superiority of nanoimaging probes and nanotherapeutics over conventional regimen for early detection of LC and abolishing PM. Current challenges to clinical transition of nanoimaging probes and therapeutic viability of nanotherapeutics for treatment for LC and PM have also been pondered.

One-Pot Gram-Scale Synthesis of Hydrogen-Terminated Silicon Nanoparticles

Silicon nanoparticles (Si NPs) are highly attractive materials for typical quantum dots functions, such as in light-emitting and bioimaging applications, owing to silicon's intrinsic merits of minimal toxicity, low cost, high abundance, and easy and highly stable functionalization. Especially nonoxidized Si NPs with a covalently bound coating serve well in these respects, given the minimization of surface defects upon hydrosilylation of H-terminated Si NPs. However, to date, methods to obtain such H-terminated Si NPs are still not easy. Herein, we report a new synthetic method to produce size-tunable robust, highly crystalline H-terminated Si NPs (4-9 nm) using microwave irradiation within 5 min at temperatures between 25 and 200 °C and their further covalent functionalization. The key step to obtain highly fluorescent (quantum yield of 7-16%) green-red Si NPs in one simple step is the reduction of triethoxysilane and (+)-sodium l-ascorbate, yielding routinely ∼1 g of H-Si NPs via a highly scalable route in 5-15 min. Subsequent functionalization via hydrosilylation yielded Si NPs with an emission quantum yield of 12-14%. This approach can be used to easily produce high-quality H-Si NPs in gram-scale quantities, which brings the application of functionalized Si NPs significantly closer.

Si nanocrystal solution with stability for one year

Colloidal silicon nanocrystals (SiNCs) are a promising material for next-generation nanostructured devices. High-stability SiNC solutions are required for practical use as well as studies on the properties of SiNC. Here, we show a solution of SiNCs that was stable for one year without aggregation. The stable solution was synthesized by a facile process, i.e., pulsed laser ablation of a Si wafer in isopropyl alcohol (IPA). The long-term stability was due to a large ζ-potential of −50 mV from a SiNC passivation layer composed of oxygen, hydrogen, and alkane groups, according to the results of eight experiments and theoretical calculations. This passivation layer also resulted in good performance as an additive for a conductive polymer film. Namely, a 5-fold enhancement in carrier density was established by the addition of SiNCs into an organic conductive polymer, poly(3-dodecylthiophene), which is useful for solar cells. Furthermore, it was found that fresh (<1 day) and aged (4 months) SiNCs give the same enhancement. The long-term stability was attributed to a great repulsive energy in IPA, whose value was quantified as a function the distance between SiNCs.

A stable nanocrystal for one year without aggregation in a liquid is synthesized by one-step, one-pot, and one-hour process.

Direct hyperpolarization of micro- and nanodiamonds for bioimaging applications - Considerations on particle size, functionalization and polarization loss

Due to the inherently long relaxation time of ¹³C spins in diamond, the nuclear polarization enhancement obtained with dynamic nuclear polarization can be preserved for a time on the order of about one hour, opening up an opportunity to use diamonds as a new class of long-lived contrast agents. The present communication explores the feasibility of using ¹³C spins in directly hyperpolarized diamonds for MR imaging including considerations for potential in vivo applications.

Biochemical phosphates observed using hyperpolarized 31P in physiological aqueous solutions

The dissolution-dynamic nuclear polarization technology had previously enabled nuclear magnetic resonance detection of various nuclei in a hyperpolarized state. Here, we show the hyperpolarization of ³¹P nuclei in important biological phosphates (inorganic phosphate and phosphocreatine) in aqueous solutions. The hyperpolarized inorganic phosphate showed an enhancement factor >11,000 (at 5.8 T, 9.3% polarization) in D₂O (T₁ 29.4 s). Deuteration and the solution composition and pH all affected the lifetime of the hyperpolarized state. This capability opens up avenues for real-time monitoring of phosphate metabolism, distribution, and pH sensing in the live body without ionizing radiation. Immediate changes in the microenvironment pH have been detected here in a cell-free system via the chemical shift of hyperpolarized inorganic phosphate. Because the ³¹P nucleus is 100% naturally abundant, future studies on hyperpolarized phosphates will not require expensive isotope labeling as is usually required for hyperpolarization of other substrates.

Real-time monitoring of phosphate metabolism and distribution in the live body without ionizing radiation is highly desirable. Here, the authors show dissolution-dynamic nuclear polarization technology can enable nuclear magnetic resonance detection of hyperpolarized ³¹P of important biological phosphates in aqueous solutions.

Nanometer size silicon particles for hyperpolarized MRI

Hyperpolarized silicon particles have been shown to exhibit long spin-lattice relaxation times at room temperature, making them interesting as novel MRI probes. Demonstrations of hyperpolarized silicon particle imaging have focused on large micron size particles (average particle size (APS) = 2.2 μm) as they have, to date, demonstrated much larger polarizations than nanoparticles. We show that also much smaller silicon-29 particles (APS = 55 ± 12 nm) can be hyperpolarized with superior properties. A maximum polarization of 12.6% in the solid state is reported with a spin-lattice relaxation time of 42 min at room temperature thereby opening a new window for MRI applications.

Vascular targeting of nanoparticles for molecular imaging of diseased endothelium

This review seeks to highlight the enormous potential of targeted nanoparticles for molecular imaging applications. Being the closest point-of-contact, circulating nanoparticles can gain direct access to targetable molecular markers of disease that appear on the endothelium. Further, nanoparticles are ideally suitable to vascular targeting due to geometrically enhanced multivalent attachment on the vascular target. This natural synergy between nanoparticles, vascular targeting and molecular imaging can provide new avenues for diagnosis and prognosis of disease with quantitative precision. In addition to the obvious applications of targeting molecular signatures of vascular diseases (e.g., atherosclerosis), deep-tissue diseases often manifest themselves by continuously altering and remodeling their neighboring blood vessels (e.g., cancer). Thus, the remodeled endothelium provides a wide range of targets for nanoparticles and molecular imaging. To demonstrate the potential of molecular imaging, we present a variety of nanoparticles designed for molecular imaging of cancer or atherosclerosis using different imaging modalities.

Recent Advances in Silicon Nanomaterial-Based Fluorescent Sensors

During the past decades, owing to silicon nanomaterials' unique optical properties, benign biocompatibility, and abundant surface chemistry, different dimensional silicon nanostructures have been widely employed for rationally designing and fabricating high-performance fluorescent sensors for the detection of various chemical and biological species. Among of these, zero-dimensional silicon nanoparticles (SiNPs) and one-dimensional silicon nanowires (SiNWs) are of particular interest. Herein, we focus on reviewing recent advances in silicon nanomaterials-based fluorescent sensors from a broad perspective and discuss possible future directions. Firstly, we introduce the latest achievement of zero-dimensional SiNP-based fluorescent sensors. Next, we present recent advances of one-dimensional SiNW-based fluorescent sensors. Finally, we discuss the major challenges and prospects for the development of silicon-based fluorescent sensors.

Nanomaterials for In Vivo Imaging

In vivo imaging, which enables us to peer deeply within living subjects, is producing tremendous opportunities both for clinical diagnostics and as a research tool. Contrast material is often required to clearly visualize the functional architecture of physiological structures. Recent advances in nanomaterials are becoming pivotal to generate the high-resolution, high-contrast images needed for accurate, precision diagnostics. Nanomaterials are playing major roles in imaging by delivering large imaging payloads, yielding improved sensitivity, multiplexing capacity, and modularity of design. Indeed, for several imaging modalities, nanomaterials are now not simply ancillary contrast entities, but are instead the original and sole source of image signal that make possible the modality's existence. We address the physicochemical makeup/design of nanomaterials through the lens of the physical properties that produce contrast signal for the cognate imaging modality-we stratify nanomaterials on the basis of their (i) magnetic, (ii) optical, (iii) acoustic, and/or (iv) nuclear properties. We evaluate them for their ability to provide relevant information under preclinical and clinical circumstances, their in vivo safety profiles (which are being incorporated into their chemical design), their modularity in being fused to create multimodal nanomaterials (spanning multiple different physical imaging modalities and therapeutic/theranostic capabilities), their key properties, and critically their likelihood to be clinically translated.

A method for imaging and spectroscopy using γ-rays and magnetic resonance

Magnetic resonance imaging (MRI) provides fine spatial resolution, spectral sensitivity and a rich variety of contrast mechanisms for diagnostic medical applications. Nuclear imaging using γ-ray cameras offers the benefits of using small quantities of radioactive tracers that seek specific targets of interest within the body. Here we describe an imaging and spectroscopic modality that combines favourable aspects of both approaches. Spatial information is encoded into the spin orientations of tiny amounts of a polarized radioactive tracer using pulses of both radio-frequency electromagnetic radiation and magnetic-field gradients, as in MRI. However, rather than detecting weak radio-frequency signals, imaging information is obtained through the detection of γ-rays. A single γ-ray detector can be used to acquire an image; no γ-ray camera is needed. We demonstrate the feasibility of our technique by producing images and spectra from a glass cell containing only about 4 × 10(13) atoms (about 1 millicurie) of the metastable isomer (131m)Xe that were polarized using the laser technique of spin-exchange optical pumping. If the cell had instead been filled with water and imaged using conventional MRI, then it would have contained more than 10(24) water molecules. The high sensitivity of our modality expands the breadth of applications of magnetic resonance, and could lead to a new class of radioactive tracers.

Developing hyperpolarized silicon particles for in vivo MRI targeting of ovarian cancer

Silicon-based nanoparticles are ideally suited for use as biomedical imaging agents due to their biocompatibility, biodegradability, and simple surface chemistry that facilitates drug loading and targeting. A method of hyperpolarizing silicon particles using dynamic nuclear polarization, which increases magnetic resonance imaging signals by several orders-of-magnitude through enhanced nuclear spin alignment, has recently been developed to allow silicon particles to function as contrast agents for in vivo magnetic resonance imaging. The enhanced spin polarization of silicon lasts significantly longer than other hyperpolarized agents (tens of minutes, whereas [Formula: see text] for other species at room temperature), allowing a wide range of potential applications. We report our recent characterizations of hyperpolarized silicon particles, with the ultimate goal of targeted, noninvasive, and nonradioactive molecular imaging of various cancer systems. A variety of particle sizes (20 nm to [Formula: see text]) were found to have hyperpolarized relaxation times ranging from [Formula: see text] to 50 min. The addition of various functional groups to the particle surface had no effect on the hyperpolarization buildup or decay rates and allowed in vivo imaging over long time scales. Additional in vivo studies examined a variety of particle administration routes in mice, including intraperitoneal injection, rectal enema, and oral gavage.

BDPA-Doped Polystyrene Beads as Polarization Agents for DNP-NMR

The aromatic free radical BDPA (α,γ-bisdiphenylene-β-phenylallyl), which has been widely used as a polarizing agent for Dynamic Nuclear Polarization (DNP) of hydrophobic analytes, has been incorporated into nanometer-scale polystyrene latex beads. We have shown that the resulting BDPA-doped beads can be used to hyperpolarize (13)C and (7)Li nuclei in aqueous environments, without the need for a glassing cosolvent. DNP enhancement factors of between 20 and 100 were achieved with overall BDPA concentrations of 2 mM or less. These Highly-Effective Polymer/Radical Beads (HYPR-beads) have potential use as an inexpensive polarizing agent for water-soluble analytes, and also have applications as model nanoparticles in DNP studies.

Real-Time MRI-Guided Catheter Tracking Using Hyperpolarized Silicon Particles

Visualizing the movement of angiocatheters during endovascular interventions is typically accomplished using x-ray fluoroscopy. There are many potential advantages to developing magnetic resonance imaging-based approaches that will allow three-dimensional imaging of the tissue/vasculature interface while monitoring other physiologically-relevant criteria, without exposing the patient or clinician team to ionizing radiation. Here we introduce a proof-of-concept development of a magnetic resonance imaging-guided catheter tracking method that utilizes hyperpolarized silicon particles. The increased signal of the silicon particles is generated via low-temperature, solid-state dynamic nuclear polarization, and the particles retain their enhanced signal for ≥ 40 minutes--allowing imaging experiments over extended time durations. The particles are affixed to the tip of standard medical-grade catheters and are used to track passage under set distal and temporal points in phantoms and live mouse models. With continued development, this method has the potential to supplement x-ray fluoroscopy and other MRI-guided catheter tracking methods as a zero-background, positive contrast agent that does not require ionizing radiation.

Developing MR probes for molecular imaging

Molecular imaging plays an important role in the era of personalized medicine, especially with recent advances in magnetic resonance (MR) probes. While the first generation of these probes focused on maximizing contrast enhancement, a second generation of probes has been developed to improve the accumulation within specific tissues or pathologies, and the newest generation of agents is also designed to report on changes in physiological status and has been termed "smart" agents. This represents a paradigm switch from the previously commercialized gadolinium and iron oxide probes to probes with new capabilities, and leads to new challenges as scanner hardware needs to be adapted for detecting these probes. In this chapter, we highlight the unique features for all five different categories of MR probes, including the emerging chemical exchange saturation transfer, (19)F, and hyperpolarized probes, and describe the key physical properties and features motivating their design. As part of this comparison, the strengths and weaknesses of each category are discussed.

Targeted nanotechnology for cancer imaging

Targeted nanoparticle imaging agents provide many benefits and new opportunities to facilitate accurate diagnosis of cancer and significantly impact patient outcome. Due to the highly engineerable nature of nanotechnology, targeted nanoparticles exhibit significant advantages including increased contrast sensitivity, binding avidity and targeting specificity. Considering the various nanoparticle designs and their adjustable ability to target a specific site and generate detectable signals, nanoparticles can be optimally designed in terms of biophysical interactions (i.e., intravascular and interstitial transport) and biochemical interactions (i.e., targeting avidity towards cancer-related biomarkers) for site-specific detection of very distinct microenvironments. This review seeks to illustrate that the design of a nanoparticle dictates its in vivo journey and targeting of hard-to-reach cancer sites, facilitating early and accurate diagnosis and interrogation of the most aggressive forms of cancer. We will report various targeted nanoparticles for cancer imaging using X-ray computed tomography, ultrasound, magnetic resonance imaging, nuclear imaging and optical imaging. Finally, to realize the full potential of targeted nanotechnology for cancer imaging, we will describe the challenges and opportunities for the clinical translation and widespread adaptation of targeted nanoparticles imaging agents.

MR imaging techniques for nano-pathophysiology and theranostics

The advent of nanoparticle DDSs (drug delivery systems, nano-DDSs) is opening new pathways to understanding physiology and pathophysiology at the nanometer scale. A nano-DDS can be used to deliver higher local concentrations of drugs to a target region and magnify therapeutic effects. However, interstitial cells or fibrosis in intractable tumors, as occurs in pancreatic or scirrhous stomach cancer, tend to impede nanoparticle delivery. Thus, it is critical to optimize the type and size of nanoparticles to reach the target. High-resolution 3D imaging provides a means of "seeing" the nanoparticle distribution and therapeutic effects. We introduce the concept of "nano-pathophysiological imaging" as a strategy for theranostics. The strategy consists of selecting an appropriate nano-DDS and rapidly evaluating drug effects in vivo to guide the next round of therapy. In this article we classify nano-DDSs by component carrier materials and present an overview of the significance of nano-pathophysiological MRI.

Progress in the characterization of bio-functionalized nanoparticles using NMR methods and their applications as MRI contrast agents

Significant progress has been made over the last three decades in the field of NMR, a technique which has proven to have a variety of applications in many scientific disciplines, including nanotechnology. Herein we describe how NMR enables the characterization of nanosystems at different stages of their formation and modification (raw materials, bare or functionalized nanosystems), even making it possible to study in vivo nanoparticle interactions, thereby importantly contributing to nanoparticle design and subsequent optimization. Furthermore, the unique characteristics of nanosystems can open up new prospects for site-targeted, more specific contrast agents, contributing to the development of certain nuclear magnetic resonance applications such as MRI.

Nanodiamond as a New Hyperpolarizing Agent and Its (13)C MRS

In this work, we have hyperpolarized carbonaceous nanoparticles (D ≈ 10 nm), that is, "nanodiamonds", with 1.1% (13)C (natural abundance) using dynamic nuclear polarization (DNP). The polarization buildup curve showed a signal enhancement with relative intensity up to 4700 at 1.4 K and 100 mW microwave power. (13)C magnetic resonance spectra (MRS) were obtained from the sample at 7 T, and the signal decayed with a T1 of 55 ± 3s. Notably, polarization was possible in the absence of added radical, consistent with previous results showing endogenous unpaired electrons in natural nanodiamonds. These likely contribute to the shorter T1's compared to those of highly pure diamond. Despite the relatively short T1, these observations suggest that natural nanodiamonds may be useful for in vivo applications.

Chemistry and biochemistry of 13C hyperpolarized magnetic resonance using dynamic nuclear polarization

The study of transient chemical phenomena by conventional NMR has proved elusive, particularly for non-(1)H nuclei. For (13)C, hyperpolarization using the dynamic nuclear polarization (DNP) technique has emerged as a powerful means to improve SNR. The recent development of rapid dissolution DNP methods has facilitated previously impossible in vitro and in vivo study of small molecules. This review presents the basics of the DNP technique, identification of appropriate DNP substrates, and approaches to increase hyperpolarized signal lifetimes. Also addressed are the biochemical events to which DNP-NMR has been applied, with descriptions of several probes that have met with in vivo success.

Preparation and characterization of decyl-terminated silicon nanoparticles encapsulated in lipid nanocapsules

In this Article, we report on the encapsulation of decyl-modified silicon nanoparticles (decyl-SiNPs) into ∼80 nm lipid nanocapsules (LNCs). The decyl-SiNPs were produced by thermal hydrosilylation of hydride-terminated SiNPs (H-SiNPs) liberated from porous silicon. Various techniques, including Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), UV-vis absorption, dynamic light scattering (DLS), and photoluminescence (PL), were used to characterize their size, shape, colloidal, and optical properties. The results indicate that these nanocapsules feature controllable size, good dispersity, high loading rate of SiNPs, colloidal stability in various media, and bright PL. The PL of decyl-SiNPs loaded LNCs was stable upon heating to 80 °C, but was sensitive to basic solutions due to proton-gated emission of the SiNPs arranged at the LNCs interface between the oil phase and the hydrophilic polyethylene glycol moieties of the surfactant. These luminescent nanocapsules are therefore promising candidates as cellular probes for fluorescence imaging. In addition, it was found that TEM imaging of small-sized decyl-SiNPs could be greatly improved by preliminary negative staining of TEM grids with phosphotungstic acid.

Surface-modified silicon nanoparticles with ultrabright photoluminescence and single-exponential decay for nanoscale fluorescence lifetime imaging of temperature

In this Communication, we report fabrication of ultrabright water-dispersible silicon nanoparticles (SiNPs) with quantum yields (QYs) up to 75% through a novelly designed chemical surface modification. A simple one-pot surface modification was developed that improves the photoluminescent QYs of SiNPs from 8% to 75% and meanwhile makes SiNPs water-dispersible. Time-correlated single photon counting and femtosecond time-resolved photoluminescence techniques demonstrate the emergence of a single and uncommonly highly emissive recombination channel across the entire NP ensemble induced by surface modification. The extended relatively long fluorescence lifetime (FLT), with a monoexponential decay, makes such surface-modified SiNPs suitable for applications involving lifetime measurements. Experimental results demonstrate that the surface-modified SiNPs can be utilized as an extraordinary nanothermometer through FLT imaging.

In vivo magnetic resonance imaging of hyperpolarized silicon particles

Silicon-based micro- and nanoparticles have gained popularity in a wide range of biomedical applications due to their biocompatibility and biodegradability in vivo, as well as their flexible surface chemistry, which allows drug loading, functionalization and targeting. Here, we report direct in vivo imaging of hyperpolarized (29)Si nuclei in silicon particles by magnetic resonance imaging. Natural physical properties of silicon provide surface electronic states for dynamic nuclear polarization, extremely long depolarization times, insensitivity to the in vivo environment or particle tumbling, and surfaces favourable for functionalization. Potential applications to gastrointestinal, intravascular and tumour perfusion imaging at subpicomolar concentrations are presented. These results demonstrate a new background-free imaging modality applicable to a range of inexpensive, readily available and biocompatible silicon particles.