Robust magnetic/polymer hybrid nanoparticles designed for crude oil entrapment and recovery in aqueous environments

Superhydrophobic aerogel blanket with magnetic and solar heating effect enables efficient continuous cleanup of highly viscous crude oil

Rapid cleanup of highly-viscous oil spills the sea is eagerly desired while still remains a great challenge. Hydrophobic and lipophilic adsorbents are regarded as ideal candidate for oil spill remediation. However, traditional adsorbents are not suitable for viscous crude oil, which would block the porous structure and lead to poor adsorption efficiency. In this work, a non-contact responsive superhydrophobic SiO₂ aerogel blankets (SAB) with excellent magnetic and solar heating effect for efficient removal of viscosity oils under harsh environments was developed, via assembled MXene and Fe₃O₄/polydimethylsiloxane layer-by-layer along the SAB skeleton (Fe₃O₄/MXene@SAB). The Fe₃O₄/MXene@SAB exhibited excellent compression tolerance (compression stress 70.69 kPa), superhydrophobic performance (water contact angle 166°), and corrosion resistance (weak acid/strong base). Due to high water repellency and stable porous structure, the Fe₃O₄/MXene@SAB could successfully separate oil-water mixture, while with remarkable separation flux (1.50-3.19 × 10⁴ L m^-2 h^-1), and separation efficiency (99.91-99.98 %). Furthermore, the responsive Fe₃O₄/MXene@SAB also showed outstanding magnetic-heating and solar-heating conversion efficiency, which could continuously separate high viscosity crude oil from seawater by pump even under relatively low magnetic fields and mild sun. The superhydrophobic blankets hold great promise for efficient treatment of heavy oil spills.

A review on the effectiveness of nanocomposites for the treatment and recovery of oil spill

The introduction of unintended oil spills into the marine ecosystem has a significant impact on aquatic life and raises important environmental concerns. The present review summarizes the recent studies where nanocomposites are applied to treat oil spills. The review deals with the techniques used to fabricate nanocomposites and identify the characteristics of nanocomposites beneficial for efficient recovery and treatment of oil spills. It classifies the nanocomposites into four categories, namely bio-based materials, polymeric materials, inorganic-inorganic nanocomposites, and carbon-based nanocomposites, and provides an insight into understanding the interactions of these nanocomposites with different types of oils. Among nanocomposites, bio-based nanocomposites are the most cost-effective and environmentally friendly. The grafting or modification of magnetic nanoparticles with polymers or other organic materials is preferred to avoid oxidation in wet conditions. The method of synthesizing magnetic nanocomposites and functionalization polymer is essential as it influences saturation magnetization. Notably, the inorganic polymer-based nanocomposite is very less developed and studied for oil spill treatment. Also, the review covers some practical considerations for treating oil spills with nanocomposites. Finally, some aspects of future developments are discussed. The terms "Environmentally friendly," "cost-effective," and "low cost" are often used, but most of the studies lack a critical analysis of the cost and environmental damage caused by chemical alteration techniques. However, the oil and gas industry will considerably benefit from the stimulation of ideas and scientific discoveries in this field.

Iron Compounds in Anaerobic Degradation of Petroleum Hydrocarbons: A Review

Waste and wastewater containing hydrocarbons are produced worldwide by various oil-based industries, whose activities also contribute to the occurrence of oil spills throughout the globe, causing severe environmental contamination. Anaerobic microorganisms with the ability to biodegrade petroleum hydrocarbons are important in the treatment of contaminated matrices, both in situ in deep subsurfaces, or ex situ in bioreactors. In the latter, part of the energetic value of these compounds can be recovered in the form of biogas. Anaerobic degradation of petroleum hydrocarbons can be improved by various iron compounds, but different iron species exert distinct effects. For example, Fe(III) can be used as an electron acceptor in microbial hydrocarbon degradation, zero-valent iron can donate electrons for enhanced methanogenesis, and conductive iron oxides may facilitate electron transfers in methanogenic processes. Iron compounds can also act as hydrocarbon adsorbents, or be involved in secondary abiotic reactions, overall promoting hydrocarbon biodegradation. These multiple roles of iron are comprehensively reviewed in this paper and linked to key functional microorganisms involved in these processes, to the underlying mechanisms, and to the main influential factors. Recent research progress, future perspectives, and remaining challenges on the application of iron-assisted anaerobic hydrocarbon degradation are highlighted.

A review on biosurfactant producing bacteria for remediation of petroleum contaminated soils

The discharge of potentially toxic petroleum hydrocarbons into the environment has been a matter of concern, as these organic pollutants accumulate in many ecosystems due to their hydrophobicity and low bioavailability. Petroleum hydrocarbons are neurotoxic and carcinogenic organic pollutants, extremely harmful to human and environmental health. Traditional treatment methods for removing hydrocarbons from polluted areas, including various mechanical and chemical strategies, are ineffective and costly. However, many indigenous microorganisms in soil and water can utilise hydrocarbon compounds as sources of carbon and energy and hence, can be employed to degrade hydrocarbon contaminants. Therefore, bioremediation using bacteria that degrade petroleum hydrocarbons is commonly viewed as an environmentally acceptable and effective method. The efficacy of bioremediation can be boosted further by using potential biosurfactant-producing microorganisms, as biosurfactants reduce surface tension, promote emulsification and micelle formation, making hydrocarbons bio-available for microbial breakdown. Further, introducing nanoparticles can improve the solubility of hydrophobic hydrocarbons as well as microbial synthesis of biosurfactants, hence establishing a favourable environment for microbial breakdown of these chemicals. The review provides insights into the role of microbes in the bioremediation of soils contaminated with petroleum hydrocarbons and emphasises the significance of biosurfactants and potential biosurfactant-producing bacteria. The review partly focusses on how nanotechnology is being employed in different critical bioremediation processes.

Functional Nanohybrids and Nanocomposites Development for the Removal of Environmental Pollutants and Bioremediation

World population growth, with the consequent consumption of primary resources and production of waste, is progressively and seriously increasing the impact of anthropic activities on the environment and ecosystems. Environmental pollution deriving from anthropogenic activities is nowadays a serious problem that afflicts our planet and that cannot be neglected. In this regard, one of the most challenging tasks of the 21st century is to develop new eco-friendly, sustainable and economically-sound technologies to remediate the environment from pollutants. Nanotechnologies and new performing nanomaterials, thanks to their unique features, such as high surface area (surface/volume ratio), catalytic capacity, reactivity and easy functionalization to chemically modulate their properties, represent potential for the development of sustainable, advanced and innovative products/techniques for environmental (bio)remediation. This review discusses the most recent innovations of environmental recovery strategies of polluted areas based on different nanocomposites and nanohybrids with some examples of their use in combination with bioremediation techniques. In particular, attention is focused on eco-friendly and regenerable nano-solutions and their safe-by-design properties to support the latest research and innovation on sustainable strategies in the field of environmental (bio)remediation.

The emergence of nanotechnology in mitigating petroleum oil spills

The world has witnessed the circumstances shaped by the oil spill for many decades that cause serious environmental problems and adverse effects on human health. Many techniques and remediation methods are followed for efficient oil spill cleanups but with the limitations and environmental issues, these procedures were not completely efficient. The "nanotechnology" word itself has fascinated not only the researchers but also many industries and the global race is on to tap its potential and to derive benefit from it. Their small size and exceptional properties have proven their potential in providing technological solutions to engineering problems. This study focuses on the scope of nanotechnology in oil spill cleanups and shows how the limitations presented by conventional methodologies can be overcome. This paper categorizes and thoroughly reviews the application of nanotechnology in oil spill cleanups in different forms and also focuses on the environmental aspects of it.

Robust and durable liquid-repellent surfaces

This review provides a comprehensive summary of characterization, design, fabrication, and application of robust and durable liquid-repellent surfaces.

Polystyrene magnetic nanocomposite blend: An effective, facile, and economical alternative in oil spill removal applications

Finding an efficient and economical method to remediate oil spills on water is a priority worldwide. In this article, we propose a solution to this problem using polystyrene magnetic nanocomposite blends composed of polystyrene chains grafted on the surface of silica coated on iron oxide nanoparticles and polystyrene. The hydrophobic and oleophilic magnetic polymer nanocomposite collected oil from the water surface quickly and efficiently. However, when the magnetic polymer nanocomposite was blended with polystyrene, the resulting material also absorbed oil efficiently from the water surface. The blending technique made it easier to prepare the absorbent and dramatically decreased its cost. These new absorbents absorbed oil up to 5 times their own weight in only 5 minutes. The excellent hydrophobicity, low density, and easy magnetic separation makes these new absorbents a promising alternative to recover oil from spilled in fresh and marine water.

Interaction between Filler and Polymeric Matrix in Nanocomposites: Magnetic Approach and Applications

In recent years, polymer nanocomposites produced by combining nanofillers and a polymeric matrix are emerging as interesting materials. Polymeric composites have a wide range of applications due to the outstanding and enhanced properties that are obtained thanks to the introduction of nanoparticles. Therefore, understanding the filler-matrix relationship is an important factor in the continued growth of this scientific area and the development of new materials with desired properties and specific applications. Due to their performance in response to a magnetic field magnetic nanocomposites represent an important class of functional nanocomposites. Due to their properties, magnetic nanocomposites have found numerous applications in biomedical applications such as drug delivery, theranostics, etc. This article aims to provide an overview of the filler-polymeric matrix relationship, with a special focus on magnetic nanocomposites and their potential applications in the biomedical field.

Advanced Switchable Molecules and Materials for Oil Recovery and Oily Waste Cleanup

Advanced switchable molecules and materials have shown great potential in numerous applications. These novel materials can express different states of physicochemical properties as controlled by a designated stimulus, such that the processing condition can always be maintained in an optimized manner for improved efficiency and sustainability throughout the whole process. Herein, the recent advances in switchable molecules/materials in oil recovery and oily waste cleanup are reviewed. Oil recovery and oily waste cleanup are of critical importance to the industry and environment. Switchable materials can be designed with various types of switchable properties, including i) switchable interfacial activity, ii) switchable viscosity, iii) switchable solvent, and iv) switchable wettability. The materials can then be deployed into the most suitable applications according to the process requirements. An in-depth discussion about the fundamental basis of the design considerations is provided for each type of switchable material, followed by details about their performances and challenges in the applications. Finally, an outlook for the development of next-generation switchable molecules/materials is discussed.

TEMPO-Functionalized Nanoreactors from Bottlebrush Copolymers for the Selective Oxidation of Alcohols in Water

Polymeric nanoreactors in water fabricated by the self-assembly of amphiphilic copolymers have attracted much attention due to their good catalytic performance without using organic solvents. However, the disassembly and instability of relevant nanostructures often compromise their potential applicability. Herein, the preparation of 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-containing nanoreactors by the self-assembly of amphiphilic bottlebrush copolymers has been demonstrated. First, a macromonomer having a norbornenyl polymerizable group was prepared by RAFT polymerization of hydrophobic and hydrophilic monomers. The macromonomer was further subjected to ring-opening metathesis polymerization to produce an amphiphilic bottlebrush copolymer. Further, TEMPO, as a catalyst, was introduced into the hydrophobic block through the activated ester strategy. Finally, TEMPO-functionalized polymeric nanoreactors were successfully obtained by self-assembly in water. The nanoreactors exhibited excellent catalytic activities in selective oxidation of alcohols in water. More importantly, the reaction kinetics showed that the turnover frequency is greatly increased compared to that of the similar nanoreactor prepared from liner copolymers under the same conditions. The outstanding catalytic activities of the nanoreactors from bottlebrush copolymers could be attributed to the more stable micellar structure using the substrate concentration effect. This work presents a new strategy to fabricate stable nanoreactors, paving the way for highly efficient organic reactions in aqueous solutions.

Functionalized Polymersomes from a Polyisoprene-Activated Polyacrylamide Precursor

Self-assembled polymer nanoparticles have tremendous potential in biomedical and environmental applications. For all applications, tailored polymer chemistries are critical. In this study, we demonstrate a precursor approach in which an activated, organic solvent-soluble block polymer precursor is modified through mild postpolymerization modifications to access new polymer structures. We synthesized and characterized poly(isoprene)-block-poly(di-Boc acrylamide) diblock polymers. This activated-acrylamide-based polymer was then reacted with amines or reductants in the absence of catalysts to yield the hydrophilic blocks polyacrylamide, poly(hydroxypropylene), and poly(N-ethyl acrylamide). The resulting amphiphilic block polymers self-assembled in water to form polymersomes, as confirmed by cryo-electron microscopy and confocal microscopy. The approach also enables simple functionalization with specialized ligands, which we demonstrated by tagging polymers with an amino-fluorophore and imaging by confocal microscopy. We expect that the methodologies established in this study will open doors to new and useful solution nanostructures with surface chemistries that can be optimized for various applications.

Synthesis of poly(caprolactone)-block-poly[oligo(ethylene glycol)methyl methacrylate] amphiphilic grafted nanoparticles (AGNs) as improved oil dispersants

Amphiphilic polymers have been covalently grafted from a SiO2 core with room temperature polymerizations. These amphiphilic grafted nanoparticles have been found to uptake up to 30 times their mass in crude oil within a 24 hour window.

Cytotoxic aquatic pollutants and their removal by nanocomposite-based sorbents

Water is an extremely essential compound for human life and, hence, accessing drinking water is very important all over the world. Nowadays, due to the urbanization and industrialization, several noxious pollutants are discharged into water. Water pollution by various cytotoxic contaminants, e.g. heavy metal ions, drugs, pesticides, dyes, residues a drastic public health issue for human beings; hence, this topic has been receiving much attention for the specific approaches and technologies to remove hazardous contaminants from water and wastewater. In the current review, the cytotoxicity of different sorts of aquatic pollutants for mammalian is presented. In addition, we will overview the recent advances in various nanocomposite-based adsorbents and different approaches of pollutants removal from water/wastewater with several examples to provide a backdrop for future research.

Direct Observation of Micelle Fragmentation via In Situ Liquid-Phase Transmission Electron Microscopy

Recently, attention has been directed toward understanding the dynamics and relaxation kinetics of block copolymer micelles, including mechanisms such as micelle fragmentation and fusion. The few prior studies on block copolymer micelle fragmentation relied on ensemble averaging techniques such as small-angle X-ray scattering and dynamic light scattering; some individual particles were imaged by ex situ transmission electron microscopy. Here we report the direct observation of fragmentation for three molecular weights of 1,2-polybutadiene-block-poly(ethylene oxide) (PB-PEO) micelles in the ionic liquid 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide using high-temperature liquid-phase transmission electron microscopy (LP-TEM). The use of in situ LP-TEM provides unique insights into the evolution of block copolymer micelles during fragmentation. Specifically, upon heating to 170 °C, a sequence of morphological transitions from a spherical micelle to a prolate ellipsoid, then a "peanut" shape, followed by a two-spherical-compartment micelle was observed, where the last is presumed to be the transition state.

Preparation of cellulose-coated cotton fabric and its application for the separation of emulsified oil in water

Cellulose is a natural material with dissolution-regeneration property and numerous hydrogen bonds in the molecule. By utilizing these properties, this paper reported the development of a multi-functional fabric consisting of cellulose and commercial cotton fabric. The morphology, mechanical and thermal properties along with the oil-water separation performance of the developed material were studied. The results showed that the cellulose dissolved in NaOH/urea solution was regenerated in a salt solution, and attached tightly onto the cotton fabric, forming a sandwich structure for the material. Such modification significantly enhanced the strength, thermal stability and hydrophilic performance of the fabrics. Interestingly, the prepared material exhibited a unique underwater oleophobic performance, and had the capability to separate highly emulsified oil-water mixtures. The relatively low cost for the material preparation, enhanced mechanical property and high separation performance distinguished the developed material a suitable candidate for the separation of emulsified oil from water in practical applications.

Biofunctionalized nanomaterials for in situ clean-up of hydrocarbon contamination: A quantum jump in global bioremediation research

Interfacing organic or inorganic nanoparticles with biological entities or molecules or systems with the aim of developing functionalized nano-scale materials or composites for remediation of persistent organic hydrocarbon pollutants (such as monocyclic and polycyclic aromatic hydrocarbons, MAH/PAH) has generated great interest and continues to grow almost unabated. However, the usefulness and potency of these materials or conjugates hinges over several key barriers, including structural assembly with fine-tuned control over nanoparticle/biomolecule ratio, spatial orientation and activity of biomolecules, the nano/bio-interface strategy and hierarchical architecture, water-dispersibility and long term colloidal stability in environmental media, and non-specific toxicity. The present review thus critically analyses, discusses and interprets recently reported attempts and approaches to functionalize nanoparticles with biomolecules. Since there is no comprehensive and critical reviews on the applications of nanotechnology in bioremediation of MAHs/PAHs, this overview essentially captures the current global scenario and vision on the use and future prospects of biofunctionalized nanomaterials with respect to their strategic interactions involved at the nano/bio-interface essential to understand and decipher the structural and functional relationships and their impact on persistent hydrocarbon remediation.

System for Living ROMP of a Paramagnetic FeCl4--Based Ionic Liquid Monomer: Direct Synthesis of Magnetically Responsive Block Copolymers

Direct, living ring-opening metathesis polymerization of a highly paramagnetic, norbornene-based imidazolium FeCl₄^- ionic liquid monomer was achieved using the Grubbs third-generation catalyst and starting the polymerization off with an uncharged, nonparamagnetic norbornene monomer in a sequential block copolymerization. Preparing the paramagnetic norbornene imidazolium FeCl₄^- monomer in high purity was found to be crucial for enabling living polymerization behavior and generating paramagnetic diblock copolymers with predictable block lengths and compositions.

Nanotechnology-based sorption and membrane technologies for the treatment of petroleum-based pollutants in natural ecosystems and wastewater streams

Petroleum processing wastewater (PPW) is a complex mixture of free, soluble, and emulsive hydrocarbons that often contain heavy metals and/or solid particles. As these hazardous constituents can accumulate in human beings and the environment, exposure to the PPW can have harmful effects in various respects. The use of environmental nanotechnologies (E-Nano) is considered an attractive option to resolve the problems associated with PPW. Among different treatment technologies, E-Nano-based sorption (adsorption/absorption) and membrane filtration approaches have been proven to have outstanding efficacy in remediation of PPW pollutants. It is, however, crucial to determine the appropriate technological option (e.g., low-cost operational conditions) for the practical application of such technologies. In this review, the potential of E-Nano-based sorption and membrane technologies in the treatment of various PPW pollutants is discussed based on their performances in comparison to traditional technologies. Their suitability is evaluated further in relation to their merits/disadvantages and economic feasibility with the goal of constructing a perspective map to efficiently implement the E-Nano technologies.

Degradable sugar-based magnetic hybrid nanoparticles for recovery of crude oil from aqueous environments

We designed and fabricated a sugar-based magnetic nanocomposite material that is capable of tackling environmental pollution posed by marine oil spills, while minimizing potential secondary problems that may occur from microplastic contamination.

Multifunctional magnetic iron oxide nanoparticles: diverse synthetic approaches, surface modifications, cytotoxicity towards biomedical and industrial applications

Magnetic iron oxide nanoparticles (MIONPs) play a major role in the emerging fields of nanotechnology to facilitate rapid advancements in biomedical and industrial platforms. The superparamagnetic properties of MIONPs and their environment friendly synthetic methods with well-defined particle size have become indispensable to obtain their full potential in a variety of applications ranging from cellular to diverse areas of biomedical science. Thus, the broadened scope and need for MIONPs in their demanding fields of applications required to be highlighted for a comprehensive understanding of their state-of-the-art. Many synthetic methods, however, do not entirely abolish their undesired cytotoxic effects caused by free radical production and high iron dosage. In addition, the agglomeration of MIONPs has also been a major problem. To alleviate these issues, suitable surface modification strategies adaptive to MIONPs has been suggested not only for the effective cytotoxicity control but also to minimize their agglomeration. The surface modification using inorganic and organic polymeric materials would represent an efficient strategy to utilize the diagnostic and therapeutic potentials of MIONPs in various human diseases including cancer. This review article elaborates the structural and magnetic properties of MIONPs, specifically magnetite, maghemite and hematite, followed by the important synthetic methods that can be exploited for biomedical approaches. The in vivo cytotoxic effects and the possible surface modifications employed to eliminate the cytotoxicity thereby enhancing the nanoparticle efficacy are also critically discussed. The roles and applications of surface modified MIONPs in medical and industrial platforms have been described for the benefits of global well-being.

Tunable functionalization of silica coated iron oxide nanoparticles achieved through a silanol-alcohol condensation reaction

The surface properties of nanoparticles play an important role in their interactions with their surroundings. Silane reagents have been used for surface modifications to silica shells on iron oxide nanoparticles, but using these reagents presents some challenges. An alternative approach to modifying the surfaces of these silica shells was developed to impart different terminal functional groups, such as a thiol, alcohol, or carboxylic acid, through the use of alcohol-based reagents. This approach to surface functionalization of the core-shell particles was verified through chemical analyses and the attachment of gold nanoparticles. The use of the silanol-alcohol condensation reaction could be extended further to other surface functionalizations through the use of additional alcohol-based reagents.

Responsive Emulsions Stabilized by Amphiphilic Supramolecular Graft Copolymers Formed in Situ at the Oil-Water Interface

Amphiphilic supramolecular graft copolymers which can stabilize oil-in-water (o/w) emulsions and enable responsive demulsification were demonstrated in this study. Linear poly[( N, N-dimethylacrylmide)- stat-(3-acrylamidophenylboronic acid)] (PDMA- stat-PAPBA) copolymers with phenylboronic acid (PBA) groups and linear polystyrene homopolymers with cis-diol terminals (PS(OH)₂) were synthesized by reversible addition-fragmentation chain transfer polymerization. By the homogenization of the biphasic mixtures of an alkaline water solution of PDMA- stat-PAPBA copolymer and a toluene solution of PS(OH)₂ homopolymer, stable o/w emulsions could be generated, although neither PDMA- stat-PAPBA nor PS(OH)₂ alone was able to stabilize the emulsion. It was verified that the dispersed oil droplets in the emulsions were stabilized by the amphiphilic PDMA- stat-PAPBA- g-PS supramolecular graft copolymers, which were formed in situ at the oil-water interface by the complexation between the lateral PBA groups of PDMA- stat-PAPBA and the diol terminals of PS(OH)₂ during homogenization. These emulsions showed pH- and glucose-responsive demulsification because of the reversible B-O bonds between the PDMA- stat-PAPBA backbones and the PS side chains. The effects of polymer concentrations on emulsion formation were also investigated. The current study provides an alternative method for the facile preparation of responsive polymeric emulsifiers, which potentially may be extended to other polymer pairs containing PBA and cis-diol groups.

Design of Optimally Stable Molecular Coatings for Fe-Based Nanoparticles in Aqueous Environments

Magnetic nanoparticles are widely used in biomedical and oil-well applications in aqueous, often harsh environments. The pursuit for high-saturation magnetization together with high stability of the molecular coating that prevents agglomeration and oxidation remains an active research area. Here, we report a detailed analysis of the criteria for the stability of molecular coatings in aqueous environments along with extensive first-principles calculations for magnetite, which has been widely used, and cementite, a promising emerging candidate. A key result is that the simple binding energies of molecules cannot be used as a definitive indicator of relative stability in a liquid environment. Instead, we find that H⁺ ions and water molecules facilitate the desorption of molecules from the surface. We further find that, because of differences in the geometry of crystal structures, molecules generally form stronger bonds on cementite surfaces than they do on magnetite surfaces. The net result is that molecular coatings of cementite nanoparticles are more stable. This feature, together with the better magnetic properties, makes cementite nanoparticles a promising candidate for biomedical and oil-well applications.

Multi-Shell Nano-CarboScavengers for Petroleum Spill Remediation

Increasingly frequent petroleum contamination in water bodies continues to threaten our ecosystem, which lacks efficient and safe remediation tactics both on macro and nanoscales. Current nanomaterial and dispersant remediation methods neglect to investigate their adverse environmental and biological impact, which can lead to a synergistic chemical imbalance. In response to this rising threat, a highly efficient, environmentally friendly and biocompatible nano-dispersant has been developed comprising a multi-shelled nanoparticle termed 'Nano-CarboScavengers' (NCS) with native properties for facile recovery via booms and mesh tools. NCS treated different forms of petroleum oil (raw and distillate form) with considerable efficiency (80% and 91%, respectively) utilizing sequestration and dispersion abilities in tandem with a ~10:1 (oil: NCS; w/w) loading capacity. In extreme contrast with chemical dispersants, the NCS was found to be remarkably benign in in vitro and in vivo assays. Additionally, the carbonaceous nature of NCS broke down by human myeloperoxidase and horseradish peroxidase enzymes, revealing that incidental biological uptake can enzymatically digest the sugar based core.

Advanced Sorbents for Oil-Spill Cleanup: Recent Advances and Future Perspectives

Oil sorbents play a very important part in the remediation processes of oil spills. To enhance the oil-sorption properties and simplify the oil-recovery process, various advanced oil sorbents and oil-collecting devices based on them have been proposed recently. Here, we firstly discuss the design considerations for the fabrication of oil sorbents and describe recently developed oil sorbents based on modification strategy. Then, recent advances regarding oil sorbents mainly based on carbon materials and swellable oleophilic polymers are also presented. Subsequently, some additional properties are emphasized, which are required by oil sorbents to cope with oil spills under extreme conditions or to facilitate the oil-collection processes. Furthermore, some oil-collection devices based on oil sorbents that have been developed recently are shown. Finally, an outlook and challenges for the next generation of oil-spill-remediation technology based on oil-sorbents materials are given.

Supercooling Self-Assembly of Magnetic Shelled Core/Shell Supraparticles

Molecular self-assembly has emerged as a powerful technique for controlling the structure and properties of core/shell structured supraparticles. However, drug-loading capacities and therapeutic effects of self-assembled magnetic core/shell nanocarriers with magnetic nanoparticles in the core are limited by the intervention of the outer organic or inorganic shell, the aggregation of superparamagnetic nanoparticles, the narrowed inner cavity, etc. Here, we present a self-assembly approach based on rebalancing hydrogen bonds between components under a supercooling process to form a new core/shell nanoscale supraparticle with magnetic nanoparticles as the shell and a polysaccharide as a core. Compared with conventional iron oxide nanoparticles, this magnetic shelled core/shell nanoparticle possesses an optimized inner cavity and a loss-free outer magnetic property. Furthermore, we find that the drug-loaded magnetic shelled nanocarriers showed interesting in vitro release behaviors at different pH conditions, including "swelling-broken", "dissociating-broken", and "bursting-broken" modes. Our experiments demonstrate the novel design of the multifunctional hybrid nanostructure and provide a considerable potential for the biomedical applications.

Direct Oil Recovery from Saturated Carbon Nanotube Sponges

Oil adsorption by porous materials is a major strategy for water purification and industrial spill cleanup; it is of great interest if the adsorbed oil can be safely recovered from those porous media. Here, direct oil recovery from fully saturated bulk carbon nanotube (CNT) sponges by displacing oil with water in controlled manner is shown. Surfactant-assisted electrocapillary imbibition is adopted to drive aqueous electrolyte into the sponge and extrude organic oil out continuously at low potentials (up to -1.2 V). More than 95 wt % of oil adsorbed within the sponge can be recovered, via a single electrocapillary process. Recovery of different oils with a wide range of viscosities is demonstrated, and the remaining CNT sponge can be reused with similar recovery capacity. A direct and efficient method is provided to recover oil from CNT sponges by water imbibition, which has many potential environmental and energy applications.