Magnetic-responsive hybrids of Fe3O4 nanoparticles with β-lactoglobulin amyloid fibrils and nanoclusters

Effects of molecular weight of hydrolysate on the formation of soy protein isolate hydrolysate nanofibrils: Kinetics, structures, and interactions

Enzymatic hydrolysis prior to protein fibrillation was an effective way to facilitate the formation of nanofibrils. This study aimed to investigate the effects of molecular weights of hydrolysate on the kinetics, structures, and interactions of soy protein isolate (SPI) hydrolysate nanofibrils. The results showed that hydrolysate with molecular weight > 10 kDa showed a distinct fibrillation kinetics curve and a higher apparent rate constant (27.72) during fibrillation, indicating their vital role in determining the fibrillation. Hydrolysate with molecular weight > 10 kDa could form nanofibrils with higher radius gyration (17.11 ± 0.77 Å) due to stronger hydrophobic interaction, showing a stronger fibrillation ability. Hydrolysate with molecular weight within 5-10 kDa exhibited enhanced π-π stacking interactions during fibrillation, thereby promoting the extension of nanofibrils, and contributing to the formation of more nanofibrils. Hydrolysate with molecular weight < 5 kDa tended to randomly aggregate during fibrillation, resulting in a significant loss of cross-β structures in nanofibrils. Therefore, hydrolysate with different molecular weights exhibited synergistic effects during fibrillation.

Amylum forms typical self-assembled amyloid fibrils

Amyloid fibril formation is a central biochemical process in pathology and physiology. Over decades, substantial advances were made in elucidating the mechanisms of amyloidogenesis, its links to disease, and the production of functional supramolecular structures. While the term "amyloid" denotes starch-like features of these assemblies, no evidence of amyloidogenic behavior of polysaccharides has been so far reported. Here, we investigate the potential of amylum (starch) not only to self-assemble into hierarchical fibrillar structures but also to exhibit canonical amyloidogenic properties. Ordered amylum structures were formed through a sigmoidal growth process with characteristic amyloid features including typical nanofibril morphology, binding to indicative dyes, inherent luminescence, apple-green birefringence upon Congo red staining, and notable mechanical rigidity. These findings shed light on polysaccharide self-assembly and expand the generic amyloid phenomenon.

Roles of Tryptophan and Charged Residues on the Polymorphisms of Amyloids Formed by K-Peptides of Hen Egg White Lysozyme Investigated through Molecular Dynamics Simulations

Atomistic molecular dynamics simulations of amyloid models, consisting of the previously reported STDY-K-peptides and K-peptides from the hen egg white lysozyme (HEWL), were performed to address the effects of charged residues and pH observed in an in vitro study. Simulation results showed that amyloid models with antiparallel configurations possessed greater stability and compactness than those with parallel configurations. Then, peptide chain stretching and ordering were measured through the end-to-end distance and the order parameter, for which the amyloid models consisting of K-peptides and the STDY-K-peptides at pH 2 displayed a higher level of chain stretching and ordering. After that, the molecular mechanics energy decomposition and the radial distribution function (RDF) clearly displayed the importance of Trp62 to the K-peptide and the STDY-K-peptide models at pH 2. Moreover, the results also displayed how the negatively charged Asp52 disrupted the interaction networks and prevented the amyloid formation from STDY-K-peptide at pH 7. Finally, this study provided an insight into the interplay between pH conditions and molecular interactions underlying the formation of amyloid fibrils from short peptides contained within the HEWL. This served as a basis of understanding towards the design of other amyloids for biomaterial applications.

Hydrogels assembled from hybrid of whey protein amyloid fibrils and gliadin nanoparticles for curcumin loading: Microstructure, tunable viscoelasticity, and stability

Food grade hydrogel has become an ideal delivery system for bioactive substances and attracted wide attention. Hybrids of whey protein isolate amyloid fibrils (WPF) and gliadin nanoparticles (GNP) were able to assemble into WPF-GNP hydrogel at a low protein concentration of 2 wt%, among which WPF and GNP were fabricated from the hydrolysis of whey protein isolate under 85°C water bath (pH 2.0) and antisolvent precipitation, respectively. Atomic force microscope (AFM) images indicated that the ordered nanofibrillar network of WPF was formed at pH 2.0 with a thickness of about 10 nm. Cryo-SEM suggested that WPF-GNP hydrogel could arrest GNP within the fibrous reticular structure of the partially deformed WPF, while the hybrids of native whey protein isolate (WPI) and GNP (WPI-GNP hybrids) only led to protein aggregates. WPF-GNP hydrogel formed at pH 4.0 (85°C, 3 h, WPF:GNP = 4:1) possessed the largest elastic modulus (G’ = 419 Pa), which far exceeded the elastic modulus of the WPI-GNP hybrids (G’ = 16.3 Pa). The presence of NaCl could enhance the strength of WPF-GNP hydrogel and the largest value was achieved at 100 mM NaCl (∼10⁵ mPa) in the range of 0∼500 mM due to electrostatic screening. Moreover, WPF-GNP hydrogel showed a high encapsulation efficiency for curcumin, 89.76, 89.26, 89.02, 85.87, and 79.24% for pH 2.0, 3.0, 4.0, 5.0, and 6.0, respectively, which suggested that the formed hydrogel possess good potential as a delivery system. WPF-GNP hydrogel also exhibited a good protection effect on the photodegradation stability of the loaded curcumin with the retention of up to 75.18% after hydrogel was exposed to ultraviolet radiation for 7 days. These results suggested that the viscoelasticity of WPF-GNP hydrogel was tunable via pH-, ion-, or composition-adjustment and the hydrogel showed excellent protection on the thermal and photodegradation stability of curcumin.

Removal of nickel and copper ions in strongly acidic conditions by in-situ formed amyloid fibrils

The research investigated a novel strategy that can synchronously remove Ni²⁺ and Cu²⁺ by synthesizing amyloid fibrils under harsh conditions. The adsorption capacity of Ni²⁺ and Cu²⁺ increased by 18.5% and 34.1% respectively in the in-situ scenario as compared to that Ni²⁺ and Cu²⁺ were introduced after amyloid fibrils preparation, meantime, it avoids the generation of acidic waste liquid in the process of preparing amyloid fibrils. The adsorption behaviors of Ni²⁺ and Cu²⁺ can be well described by the pseudo-second-order kinetic model and Langmuir isotherm. The functional groups of amide, hydroxyl, and carboxyl played determining roles in the adsorption process. Moreover, when the amyloid fibrils were prepared in the presence of Ni²⁺ and Cu²⁺, i.e., the in-situ adsorption scenario, metal ions tended to occupy the functional sites, inhibit protein aggregation, and affect long amyloid fibrils synthesis accordingly. Metal ion-binding site prediction server was used to predict the binding sites of metal ions towards the protein sequence within amyloid fibrils, and the metal ion was observed to preferentially bind to a particular residue such as glutamic acid, cysteine, and serine. The amyloid fibrils be potentially valuable for the removal of heavy metals in strongly acidic wastewater such as acidic mining drainage.

Deconstruction and Reassembly of Renewable Polymers and Biocolloids into Next Generation Structured Materials

This review considers the most recent developments in supramolecular and supraparticle structures obtained from natural, renewable biopolymers as well as their disassembly and reassembly into engineered materials. We introduce the main interactions that control bottom-up synthesis and top-down design at different length scales, highlighting the promise of natural biopolymers and associated building blocks. The latter have become main actors in the recent surge of the scientific and patent literature related to the subject. Such developments make prominent use of multicomponent and hierarchical polymeric assemblies and structures that contain polysaccharides (cellulose, chitin, and others), polyphenols (lignins, tannins), and proteins (soy, whey, silk, and other proteins). We offer a comprehensive discussion about the interactions that exist in their native architectures (including multicomponent and composite forms), the chemical modification of polysaccharides and their deconstruction into high axial aspect nanofibers and nanorods. We reflect on the availability and suitability of the latter types of building blocks to enable superstructures and colloidal associations. As far as processing, we describe the most relevant transitions, from the solution to the gel state and the routes that can be used to arrive to consolidated materials with prescribed properties. We highlight the implementation of supramolecular and superstructures in different technological fields that exploit the synergies exhibited by renewable polymers and biocolloids integrated in structured materials.

Amyloids as Building Blocks for Macroscopic Functional Materials: Designs, Applications and Challenges

Amyloids are self-assembled protein aggregates that take cross-β fibrillar morphology. Although some amyloid proteins are best known for their association with Alzheimer’s and Parkinson’s disease, many other amyloids are found across diverse organisms, from bacteria to humans, and they play vital functional roles. The rigidity, chemical stability, high aspect ratio, and sequence programmability of amyloid fibrils have made them attractive candidates for functional materials with applications in environmental sciences, material engineering, and translational medicines. This review focuses on recent advances in fabricating various types of macroscopic functional amyloid materials. We discuss different design strategies for the fabrication of amyloid hydrogels, high-strength materials, composite materials, responsive materials, extracellular matrix mimics, conductive materials, and catalytic materials.

Dependence of the Nanoscale Composite Morphology of Fe3O4 Nanoparticle-Infused Lysozyme Amyloid Fibrils on Timing of Infusion: A Combined SAXS and AFM Study

Understanding the formation process and the spatial distribution of nanoparticle (NP) clusters on amyloid fibrils is an essential step for the development of NP-based methods to inhibit aggregation of amyloidal proteins or reverse the assembling trend of the proto-fibrillary complexes that prompts pathogenesis of neuro degeneration. For this, a detailed structural determination of the diverse hybrid assemblies that are forming is needed, which can be achieved by advanced X-ray scattering techniques. Using a combined solution small angle X-ray scattering (SAXS) and atomic force microscopy (AFM) approach, this study investigates the intrinsic trends of the interaction between lysozyme amyloid fibrils (LAFs) and Fe3O4 NPs before and after fibrillization at nanometer resolution. AFM images reveal that the number of NP clusters interacting with the lysozyme fibers does not increase significantly with NP volume concentration, suggesting a saturation in NP aggregation on the fibrillary surface. The data indicate that the number of non-adsorbed Fe3O4 NPs is highly dependent on the timing of NP infusion within the synthesis process. SAXS data yield access to the spatial distribution, aggregation manner and density of NP clusters on the fibrillary surfaces. Employing modern data analysis approaches, the shape and internal structural morphology of the so formed nanocomposites are revealed. The combined experimental approach suggests that while Fe3O4 NPs infusion does not prevent the fibril-formation, the variation of NP concentration and size at different stages of the fibrillization process can impose a pronounced impact on the superficial and internal structural morphologies of these nanocomposites. These findings may be applicable in devising advanced therapeutic treatments for neurodegenerative diseases and designing novel bio-inorganic magnetic devices. Our results further demonstrate that modern X-ray methods give access to the structure of-and insight into the formation process of-biological-inorganic hybrid structures in solution.

Necessity of regulatory guidelines for the development of amyloid based biomaterials

Amyloid diseases are caused due to protein homeostasis failure where incorrectly folded proteins/peptides form cross-β-sheet rich amyloid fibrillar structures. Besides proteins/peptides, small metabolite assemblies also exhibit amyloid-like features. These structures are linked to several human and animal diseases. In addition, non-toxic amyloids with diverse physiological roles are characterized as a new functional class. This finding, along with the unique properties of amyloid like stability and mechanical strength, led to a surge in the development of amyloid-based biomaterials. However, the usage of these materials by humans and animals may pose a health risk such as the development of amyloid diseases and toxicity. This is possible because amyloid-based biomaterials and their fragments may assist seeding and cross-seeding mechanisms of amyloid formation in the body. This review summarizes the potential uses of amyloids as biomaterials, the concerns regarding their usage, and a prescribed workflow to initiate a regulatory approach.

Self-Assembly of Poly(ethyleneimine)-Modified g-C3N4 Nanosheets with Lysozyme Fibrils for Chromium Detoxification

We disclose a straightforward approach to fabricate nanocomposites for efficient capture of Cr(VI) from an aqueous solution through the self-assembly of poly(ethyleneimine)-modified graphitic carbon nitride nanosheets (PEI-g-C₃N₄ NSs) and lysozyme fibrils (LFs). The as-made PEI-g-C₃N₄ NSs@LFs exhibited mesoporous structures with a high specific surface area of 39.6 m² g^-1, a large pore volume of 0.25 cm³ g^-1, several functional groups (e.g., -N, -NH, -NH₂, and -COOH), and a zero-point charge at pH 9.1. These merits allow the PEI-g-C₃N₄ NSs@LFs to further enhance their physical adsorption and electrostatic attraction with the negatively charged Cr(VI) species of HCrO₄^- and CrO₄^2-, which is beneficial for the uptake of Cr(VI), >80%, from an aqueous solution in a wide pH range. Interestingly, X-ray photoelectron spectra indicate that the PEI-g-C₃N₄ NSs@LFs converted Cr(VI) to Cr(III) through visible-light-induced photoreduction. The adsorption of Cr(VI) on the surface of PEI-g-C₃N₄ NSs@LFs was found to obey the Freundlich isotherm model, signifying that they have a heterogeneous surface for the multilayer uptake of Cr(VI). In contrast, the PEI-g-C₃N₄ NSs and LFs as Cr(VI) adsorbents followed the Langmuir isotherm model. Adsorption kinetic studies showed that the uptake of Cr(VI) through the PEI-g-C₃N₄ NSs@LFs was highly correlated with a pseudo-first-order model, suggesting that physisorption dominates the interaction of Cr(VI) and the PEI-g-C₃N₄ NSs@LFs. In real-life applications, the PEI-g-C₃N₄ NSs@LFs were used for the detoxification of the total chromium in the industrial effluent and sludge samples.

Elastic constants of biological filamentous colloids: estimation and implications on nematic and cholesteric tactoid morphologies

Biological liquid crystals, originating from the self-assembly of biological filamentous colloids, such as cellulose and amyloid fibrils, show a complex lyotropic behaviour that is extremely difficult to predict and characterize. Here we analyse the liquid crystalline phases of amyloid fibrils, and sulfated and carboxylated cellulose nanocrystals and measure their Frank-Oseen elastic constants K1, K2 and K3 by four different approaches. The first two approaches are based on the benchmark of the predictions of: (i) a scaling form and (ii) a variational form of the Frank-Oseen energy functional with the experimental critical volumes at order-order liquid crystalline transitions of the tactoids. The third and the fourth methods imply: (iii) the direct scaling equations of elastic constants and (iv) a molecular theory predicting the elastic constants from the experimentally accessible contour length distributions of the filamentous colloids. These three biological systems exhibit diverse liquid crystalline behaviour, governed by the distinct elastic constants characterizing each colloid. Differences and similarities among the three systems are highlighted and interpreted based on the present analysis, providing a general framework to study dispersed liquid crystalline systems.

Metal-Protein Hybrid Materials with Desired Functions and Potential Applications

Metal nanohybrids are fast emerging functional nanomaterials with advanced structures, intriguing physicochemical properties, and a broad range of important applications in current nanoscience research. Significant efforts have been devoted toward design and develop versatile metal nanohybrid systems. Among numerous biological components, diverse proteins offer avenues for making advanced multifunctional systems with unusual properties, desired functions, and potential applications. This review discusses the rational design, properties, and applications of metal-protein nanohybrid materials fabricated from proteins and inorganic components. The construction of functional biomimetic nanohybrid materials is first briefly introduced. The properties and functions of these hybrid materials are then discussed. After that, an overview of promising application of biomimetic metal-protein nanohybrid materials is provided. Finally, the key challenges and outlooks related to this fascinating research area are also outlined.

Apoferritin Amyloid-Fibril Directed the In Situ Assembly and/or Synthesis of Optical and Magnetic Nanoparticles

The coupling of proteins that can assemble, recognise or mineralise specific inorganic species is a promising strategy for the synthesis of nanoscale materials with a controllable morphology and functionality. Herein, we report that apoferritin protein amyloid fibrils (APO) have the ability to assemble and/or synthesise various metal and metal compound nanoparticles (NPs). As such, we prepared metal NP-protein hybrid bioconjugates with improved optical and magnetic properties by coupling diverse gold (AuNPs) and magnetic iron oxide nanoparticles (MNPs) to apoferritin amyloid fibrils and compared them to the well-known β-lactoglobulin (BLG) protein. In a second approach, we used of solvent-exposed metal-binding residues in APO amyloid fibrils as nanoreactors for the in situ synthesis of gold, silver (AgNPs) and palladium nanoparticles (PdNPs). Our results demonstrate, the versatile nature of the APO biotemplate and its high potential for preparing functional hybrid bionanomaterials. Specifically, the use of apoferritin fibrils as vectors to integrate magnetic MNPs or AuNPs is a promising synthetic strategy for the preparation of specific contrast agents for early in vivo detection using various bioimaging techniques.

Preparation of Amyloid Fibrils Using Recombinant Technology

Amyloid fibrils are widely investigated as they are directly associated with various neurodegenerative diseases. For example, a vast of experimental results have shown that the oligomeric and fibrillar aggregates of the amyloid β-peptide (Aβ) play a critical role in the pathogenesis of Alzheimer's disease (AD). Therefore, the accessibility of certain amounts of pure Aβ peptide is necessary for the studies of the mechanism of neurotoxicity. In this regard, recombinant methods provide the possibility to synthesize the Aβ peptide in vitro and thus promote the investigation of the relationship between peptide structure and pathogenic mechanism. These investigations further provide the fundamental supports for developing potential drugs for AD treatment. In addition to providing support for the study of pathogenic mechanisms, the recombination of Aβ peptides also offers the possibility to utilize these unique protein nanomaterials. For example, Aβ peptides tend to assemble into chiral amyloid fibrils with an ultra-high aspect ratio. These unique nano features, together with the inherent protein characteristics, of amyloid fibrils, allow them to be used in biomedical and environmental fields. Accordingly, herein, we aim to introduce the recombinant protocols for the synthesis of Aβ peptides. The experimental route to assemble these peptides to amyloid fibrils is also summarized in this chapter.

Self-Winding Gelatin-Amyloid Wires for Soft Actuators and Sensors

The origin of self-winding mechanisms in plants' tendrils has fascinated scientists for centuries and continues to inspire developments in material science and nanotechnology. Here, bioinspired water-responsive wires that replicate these mechanisms, including the formation of coils and chiral perversions, are presented. A right-handed gelatin matrix is loaded with rigid left-handed amyloid fibrils and roll-dry-spun into wires in which self-winding activation emerges from simultaneous bending and twisting deformations. Wire bending is a consequence of amyloid fibrils' concentration and distribution within the wire, whereas twisting is controlled by amyloid fibrils' orientation. The resultant wires can be functionalized by organic molecules and inorganic nanoparticles, and potential applications in magnetic actuators and sensors are demonstrated. The simple fabrication method and the remarkable spontaneous self-winding response of these gelatin-amyloid wires exemplify how biomaterials based on mixed proteins have striking potential to develop advanced and tunable properties that can serve robotics, soft machines, and engineering systems.

Fe3O4@TiO2-Laden Neutrophils Activate Innate Immunity via Photosensitive Reactive Oxygen Species Release

Although a variety of advanced sterilization materials and treatments have emerged, the complete elimination of bacterial infection, especially drug-resistant bacterial infection, remains an immense challenge. Here, we demonstrate the use of neutrophils loaded with photocatalytic nanoparticles to reduce bacterial infection. This method activates the immune system to achieve an anti-infection response. We prepared the photocatalytic nanoparticle-laden neutrophils in vivo through neutrophil phagocytosis. The resulting loaded cells retained the cell membrane functionality of the source cell, as well as the complete immune cell function of neutrophils, particularly the ability to recruit macrophages to the target area. Photocatalytic nanoparticle-laden neutrophils can target infection sites and release reactive oxygen species to induce the secretion of chemokines, leading to the targeted recruitment of macrophages and enhancing a powerful immune cascade. In a severe mouse infection model induced by pathogenic bacteria, small doses of photocatalytic nanoparticle-laden neutrophils showed a remarkable therapeutic effect by enhancing macrophage recruitment and the immune cascade.

Effect of the concentration of protein and nanoparticles on the structure of biohybrid nanocomposites

We present colloidal nanocomposites formed by incorporating magnetite Fe₃ O₄ nanoparticles (MNPs) with lysozyme amyloid fibrils (LAFs). Preparation of two types of solutions, with and without addition of salt, was carried out to elucidate the structure of MNPs-incorporated fibrillary nanocomposites and to study the effect of the presence of salt on the stability of the nanocomposites. The structural morphology of the LAFs and their interaction with MNPs were analyzed by atomic force microscopy and small-angle x-ray scattering measurements. The results indicate that conformational properties of the fibrils are dependent on the concentration of protein, and the precise ratio of the concentration of the protein and MNPs is crucially important for the stability of the fibrillary nanocomposites. Our results confirm that despite the change in fibrillary morphology induced by the varying concentration of the protein, the adsorption of MNPs on the surface of LAF is morphologically independent. Moreover, most importantly, the samples containing salt have excellent stability for up to 1 year of shelf-life.

CLVFFA-Functionalized Gold Nanoclusters Inhibit Aβ40 Fibrillation, Fibrils' Prolongation, and Mature Fibrils' Disaggregation

The abnormal aggregation of amyloid beta (Aβ or A beta) from monomeric proteins into amyloid fibrils is an important pathological contact to Alzheimer's disease (AD). Amyloid beta 40 (Aβ40), the pivotal biomarker of AD, aggregates to form amyloid plaques. For this reason, inhibition of amyloid fibrillation had become a crucial prevention and therapeutic strategy. Usually, LVFFA is the central hydrophobic fragment of Aβ and can inhibit the aggregation of Aβ40. In this work, in order to improve the inhibitory ability of LVFFA, hexapeptide CLVFFA were conjugated at the surface of Au clusters (AuNCs) to manufacture a nanosized inhibitor, AuNCs-CLVFFA. Thioflavin T fluorescence and transmission electron microscope results showed that AuNCs-CLVFFA inhibited Aβ40 fibrillogenesis, fibrils' prolongation, and mature fibrils' disaggregation. Furthermore, AuNCs as the backbone of the inhibitor showed extraordinary inhibition ability for Aβ40 aggregation at a low AuNCs-CLVFFA concentration. Free hexapeptide CLVFFA, at the same concentration, showed almost no inhibition. Additionally, the inhibitor could maintain the optical properties of nanoclusters, and the cell viability demonstrated that the inhibitor had good biocompatibility and may potentially be applied into AD therapy or treatment.

Protein corona formation and its constitutional changes on magnetic nanoparticles in serum featuring a polydehydroalanine coating: effects of charge and incubation conditions

The inevitable formation of a protein corona upon contact of nanoparticles with different biological fluids is of great interest in the context of biomedical applications. It is well established that the surface chemistry of the respective nanomaterial has tremendous impact on protein adsorption, both in terms of the actual amount as well as the type of proteins adsorbed. In that regard, especially polyzwitterions are discussed as coating materials as they are known to partially inhibit protein adsorption. We herein present comparative incubation studies on iron oxide nanoparticles (either single core (SPION) or multicore nanoparticles (MCNP)) after coating with either polyanionic or polyzwitterionic polymeric shells based on polydehydroalanine (PDha). Apart from varying surface charge and chemistry, also the influence of incubation time and temperature on the formation and composition of a protein corona upon exposure to fetal calf serum was investigated. The amounts of adsorbed biomolecules were determined using thermogravimetric analysis. SDS-PAGE experiments revealed information on protein composition as major components of the biomolecule corona. Our results show that distinctly lower amounts of proteins are adsorbed onto polyzwitterionic hybrid nanoparticles in general, but also the corona composition varies as indicated by elevated relative ratios of medium molecular weight proteins (i.e. proteins 25-100 kDa) estimated by non-specific silver protein staining. In addition, increasing relative amounts of albumin (67 kDa) via specific Western blot assays on PDha-coated MCNP are detected.

Self-assembly of plant protein fibrils interacting with superparamagnetic iron oxide nanoparticles

In situ fibrillation of plant proteins in presence of the superparamagnetic iron oxide nanoparticles (NP) promoted formation of a hybrid nanocomposite. The morphology of NP-fibril composite was revealed using ex-situ atomic force microscopy (AFM) in air. The NP-fibrils were associated into extended multi-fibril structures, indicating that the addition of NPs promoted protein association via β-sheet assembly. Real-time movement of NPs attached to fibrils under an external magnetic field was visualized using in-situ AFM in liquid, revealing that composite structures were stable at low pH, and displaying dipolar property of the NPs in the composite at high pH. Changes in magnetic properties of NPs when interacting with protein fibrils were quantitatively mapped using magnetic force microscopy (MFM). The magnetic moment of the NPs in composite was increased by co-existing with protein at low pH, while their dipolar nature was maintained at high pH. Self-assembly of the protein into fibrils is accelerated with increasing NP concentration within an optimal range, which is attributed to a fibrillation-competent conformation of the peptides. The latter was explained by the formation of favorable hydrogen bonds, electrostatic interactions, and efficient surface energy transfer between NPs and proteins.

Selective and Efficient Removal of Fluoride from Water: In Situ Engineered Amyloid Fibril/ZrO2 Hybrid Membranes

We report a new strategy for efficient removal of F^- from contaminated water streams, and it relies on carbon hybrid membranes made of amyloid fibril/ZrO₂ nanoparticles (<10 nm). These membranes exhibit superior selectivity for F^- against various competitive ions, with a distribution coefficient (K_d ) as high as 6820 mL g^-1 , exceeding commercial ion-exchange resins (IRA-900) by 180 times and outdoing the performance of most commercial carbon-activated aluminum membranes. At both low and high (ca. 200 mg L^-1 ) F^- concentrations, the membrane efficiency exceeds 99.5 % removal. For real untreated municipal tap water (ca. 2.8 mg L^-1 ) under continuous operating mode, data indicates that about 1750 kg water m^-2 membrane can be treated while maintaining drinking water quality, and the saturated membranes can be regenerated and reused several times without decrease in performance. This technology is promising for mitigating the problem of fluoride water contamination worldwide.

Dual Size-Dependent Effect of Fe₃O₄ Magnetic Nanoparticles Upon Interaction with Lysozyme Amyloid Fibrils: Disintegration and Adsorption

Nanomedicine compounds containing nanoparticles, such as iron oxides and gold, have been demonstrated to be effective in promoting different magnitudes of interaction with amyloid β fibrils, of which disintegrating or inhibiting effects are of great importance to treating fibrillary aggregation-induced neurological disorders such as Alzheimer’s disease. This research herein studies the interaction between lysozyme amyloid fibrils, a type of fibers derived from hen egg white lysozyme, and Fe₃O₄ magnetic nanoparticles (MNPs) of an assorted diameter sizes of 5 nm, 10 nm and 20 nm, using atomic force microscopy (AFM). Specifically, the effects of the sizes of negatively charged MNPs on the resultant amyloid fibrillary mixture was investigated. Our results of AFM images indicated that the interaction between MNPs and the fibrils commences immediately after adding MNPs to the fibril solution, and the actions of such MNPs-doped fibrillary interplay, either integration or segmentation, is strongly dependent on the size and volume concentration of MNPs. In the cases of 5 nm and 20 nm particles of equivalent volume concentration, the adsorption and agglomeration of MNPs onto the fibrillary surfaces was observed, whereas, interestingly, MNPs with diameter size of 10 nm enables segmentation of the slender fibrils into debris when a proper implemented volume concentration was found, which signifies utter destruction of the amyloid fibrillary structure.

Amphiphilic spherical nanoparticles with a nitrogen-enriched carbon-like surface by using β-lactoglobulin as a template

We demonstrate a versatile and facile method for fabrication of a new class of amphiphilic spherical nanoparticles having a nitrogen-enriched carbonised surface and precisely-controlled morphology. They are prepared by one-pot polymerization with β-lactoglobulin aggregates as a template with tunable size (70-750 nm) and mild heat-treatment to extend the π-conjugated structures.

Protein Amyloid Fibrils as Template for the Synthesis of Silica Nanofibers, and Their Use to Prepare Superhydrophobic, Lotus-Like Surfaces

In this work, amyloid fibrils are used as a template for the preparation of long silica fibers, with a variety of aspect ratios and surface roughness. Starting with β-lactoglobulin fibrils with typical diameters of about 20 nm and a length of several micrometers, two different strategies are followed to grow silica: either in water at acidic pH values, or in ethanol-water mixtures under Stöber conditions and an excellent control of both the thickness and the roughness of the silica layer has been achieved. Silica nanofibers with a thickness ranging from a few nanometers to hundreds of nanometers are prepared. As an application, the rough silica nanotubes are used to create superhydrophobic surfaces by mimicking the structure of the lotus leaf. The papillary structure of the lotus leaf is replicated by depositing 10 μm colloidal particles in either a single colloidal crystal, or in a binary colloidal crystal made with smaller sub-micrometer particles. Then, silica nanofibers are deposited on the binary colloidal crystal surfaces through a layer-by-layer deposition procedure to replicate the nanoscale roughness provided by wax nanotubes. Upon hydrophobization of the silica nanotubes, the final surfaces are highly superhydrophobic, with a water contact angle of 165.5°.

Polyphenol-Binding Amyloid Fibrils Self-Assemble into Reversible Hydrogels with Antibacterial Activity

Adaptable hydrogel networks with reversible connectivity have emerged as a promising platform for biomedical applications. Synthetic copolymers and low-molecular-weight gelators (LMWG) have been shown to form reversible hydrogels through self-assembly of the molecules driven by self-complementary hydrophobic interaction and hydrogen bonding. Here, inspired by the adhesive proteins secreted by mussels, we found that simply adding natural polyphenols, such as epigallocatechin gallate (EGCG) to amyloid fibrils present in the nematic phase, successfully drives the formation of hydrogels through self-assembly of the hybrid supramolecules. The hydrogels show birefringence under polarized light, indicating that the nematic orientation is preserved in the gel phase. Gel stiffness enhances with incubation time and with an increase in molecular ratios between polyphenol and fibrils, fibril concentration, and pH. The hydrogels are shear thinning and thermostable from 25 to 90 °C without any phase transition. The integrity of the trihydroxyl groups, the gallate ester moiety in EGCG, and the hydrophobicity of the polyphenols govern the interactions with the amyloid fibrils and thus the properties of the ensuing hydrogels. The EGCG-binding amyloid fibrils, produced from lysozyme and peptidoglycans, retain the main binding functions of the enzyme, inducing bacterial agglomeration and immobilization on both Gram-positive and Gram-negative bacteria. Furthermore, the antibacterial mechanism of the lysozyme amyloid fibril hydrogels is initiated by membrane disintegration. In combination with the lack of cytotoxicity to human colonic epithelial cells demonstrated for these hybrid supramolecules, a potential role in combating multidrug-resistant bacteria in biomedical applications is suggested, such as in targeting diseases related to infection of the small intestine.

Reversible Adsorption of Methylene Blue as Cationic Model Cargo onto Polyzwitterionic Magnetic Nanoparticles

The reversible electrostatic adsorption of the cationic dye methylene blue (MB) as a model compound to polydehydroalanine (PDha)-coated magnetic multicore nanoparticles (MCNP) is presented. The pH responsiveness of the zwitterionic coating material enables reversible switching of the net surface charge of the PDha@MCNP hybrid particles by changes in pH and thus allows reversible adsorption of MB at neutral pH and desorption at low pH values. The resulting hybrid materials can be very interesting systems in the context of water purification, and the reversible adsorption is studied using UV-vis spectroscopy under varying surrounding conditions. The particles are characterized using dynamic light scattering, zeta potential measurements, transmission electron microscopy, and thermogravimetric analysis.

Self-assembling peptide and protein amyloids: from structure to tailored function in nanotechnology

Self-assembled peptide and protein amyloid nanostructures have traditionally been considered only as pathological aggregates implicated in human neurodegenerative diseases. In more recent times, these nanostructures have found interesting applications as advanced materials in biomedicine, tissue engineering, renewable energy, environmental science, nanotechnology and material science, to name only a few fields. In all these applications, the final function depends on: (i) the specific mechanisms of protein aggregation, (ii) the hierarchical structure of the protein and peptide amyloids from the atomistic to mesoscopic length scales and (iii) the physical properties of the amyloids in the context of their surrounding environment (biological or artificial). In this review, we will discuss recent progress made in the field of functional and artificial amyloids and highlight connections between protein/peptide folding, unfolding and aggregation mechanisms, with the resulting amyloid structure and functionality. We also highlight current advances in the design and synthesis of amyloid-based biological and functional materials and identify new potential fields in which amyloid-based structures promise new breakthroughs.

Nanoscale Control of Amyloid Self-Assembly Using Protein Phase Transfer by Host-Guest Chemistry

Amyloid fibrils have recently been highlighted for their diverse applications as functional nanomaterials in modern chemistry. However, tight control to obtain a targeted fibril length with low heterogeneity has not been achieved because of the complicated nature of amyloid fibrillation. Herein, we demonstrate that fibril assemblies can be homogeneously manipulated with desired lengths from ~40 nm to ~10 μm by a phase transfer of amyloid proteins based on host-guest chemistry. We suggest that host-guest interactions with cucurbit[6]uril induce a phase transfer of amyloid proteins (human insulin, human islet amyloid polypeptide, hen egg lysozyme, and amyloid-β 1–40 & 1–42) from the soluble state to insoluble state when the amount of cucurbit[6]uril exceeds its solubility limit in solution. The phase transfer of the proteins kinetically delays the nucleation of amyloid proteins, while the nuclei formed in the early stage are homogeneously assembled to fibrils. Consequently, supramolecular assemblies of amyloid proteins with heterogeneous kinetics can be controlled by protein phase transfer based on host-guest interactions.

Amyloid fibril systems reduce, stabilize and deliver bioavailable nanosized iron

Iron-deficiency anaemia (IDA) is a major global public health problem. A sustainable and cost-effective strategy to reduce IDA is iron fortification of foods, but the most bioavailable fortificants cause adverse organoleptic changes in foods. Iron nanoparticles are a promising solution in food matrices, although their tendency to oxidize and rapidly aggregate in solution severely limits their use in fortification. Amyloid fibrils are protein aggregates initially known for their association with neurodegenerative disorders, but recently described in the context of biological functions in living organisms and emerging as unique biomaterial building blocks. Here, we show an original application for these protein fibrils as efficient carriers for iron fortification. We use biodegradable amyloid fibrils from β-lactoglobulin, an inexpensive milk protein with natural reducing effects, as anti-oxidizing nanocarriers and colloidal stabilizers for iron nanoparticles. The resulting hybrid material forms a stable protein-iron colloidal dispersion that undergoes rapid dissolution and releases iron ions during acidic and enzymatic in vitro digestion. Importantly, this hybrid shows high in vivo iron bioavailability, equivalent to ferrous sulfate in haemoglobin-repletion and stable-isotope studies in rats, but with reduced organoleptic changes in foods. Feeding the rats with these hybrid materials did not result in abnormal iron accumulation in any organs, or changes in whole blood glutathione concentrations, inferring their primary safety. Therefore, these iron-amyloid fibril hybrids emerge as novel, highly effective delivery systems for iron in both solid and liquid matrices.

Hybrid Nanoscopy of Hybrid Nanomaterials

The combination of complementary techniques to characterize materials at the nanoscale is crucial to gain a more complete picture of their structure, a key step to design and fabricate new materials with improved properties and diverse functions. Here it is shown that correlative atomic force microscopy (AFM) and localization-based super-resolution microscopy is a useful tool that provides insight into the structure and emissive properties of fluorescent β-lactoglobulin (βLG) amyloid-like fibrils. These hybrid materials are made by functionalization of βLG with organic fluorophores and quantum dots, the latter being relevant for the production of 1D inorganic nanostructures templated by self-assembling peptides. Simultaneous functionalization of βLG fibers by QD655 and QD525 allows for correlative AFM and two-color super-resolution fluorescence imaging of these hybrid materials. These experiments allow the combination of information about the topography and number of filaments that compose a fibril, as well as the emissive properties and nanoscale spatial distribution of the attached fluorophores. This study represents an important step forward in the characterization of multifunctionalized hybrid materials, a key challenge in nanoscience.

Catalytic Membrane Reactor Immobilized with Alloy Nanoparticle-Loaded Protein Fibrils for Continuous Reduction of 4-Nitrophenol

A catalytic membrane reactor, which contains a membrane matrix and a catalytic film of alloy nanoparticle-loaded β-lactoglobulin fibrils (NPs@β-LGF), was developed for the continuous-flow reduction of 4-nitrophenol (4-NP). The Cu-Ag and Cu-Ag-Au alloy NPs were synthesized using β-LGF as a scaffold and stabilizing agent. In this process, the Cu nanoclusters were formed in the initial stage and were able to promote the synthesis of Ag⁰, which acts as a reducing agent for the rapid formation of Au⁰. Furthermore, a catalytic membrane reactor was constructed by depositing the NPs@β-LGFs on a membrane matrix. The catalytic activity of the Cu-Ag-Au alloy NPs was higher than that of the Cu-Ag alloy NPs, using the reduction of 4-NP to 4-AP as a model reaction. The observed rate constant in the continuous-flow system is also higher than that in the batch system. In addition, these catalytic membrane reactors had good operating stability and antibacterial activity.

Amyloid Fibrils as Building Blocks for Natural and Artificial Functional Materials

Proteinaceous materials based on the amyloid core structure have recently been discovered at the origin of biological functionality in a remarkably diverse set of roles, and attention is increasingly turning towards such structures as the basis of artificial self-assembling materials. These roles contrast markedly with the original picture of amyloid fibrils as inherently pathological structures. Here we outline the salient features of this class of functional materials, both in the context of the functional roles that have been revealed for amyloid fibrils in nature, as well as in relation to their potential as artificial materials. We discuss how amyloid materials exemplify the emergence of function from protein self-assembly at multiple length scales. We focus on the connections between mesoscale structure and material function, and demonstrate how the natural examples of functional amyloids illuminate the potential applications for future artificial protein based materials.

Continuous Paranematic Ordering of Rigid and Semiflexible Amyloid-Fe3O4 Hybrid Fibrils in an External Magnetic Field

External magnetic field is a powerful approach to induce orientational order in originally disordered suspensions of magneto-responsive anisotropic particles. By small angle neutron scattering and optical birefringence measurement technology, we investigated the effect of magnetic field on the spatial ordering of hybrid amyloid fibrils with different aspect ratios (length-to-diameter) and flexibilities decorated by spherical Fe3O4 nanoparticles. A continuous paranematic ordering from an initially isotropic suspension was observed upon increasing magnetic field strength, with spatial orientation increasing with colloidal volume fraction. At constant dimensionless concentration, stiff hybrid fibrils with varying aspect ratios and volume fractions, fall on the same master curve, with equivalent degrees of ordering at identical magnetic fields. However, the semiflexible hybrid fibrils with contour length close to persistence length exhibit a lower degree of alignment. This is consistent with Khokhlov-Semenov theoretical predictions. These findings sharpen the experimental toolbox to design colloidal systems with controllable degree of orientational ordering.

Apoferritin fibers: a new template for 1D fluorescent hybrid nanostructures

Recently, research in the field of protein amyloid fibers has gained great attention due to the use of these materials as nanoscale templates for the construction of functional hybrid materials. The formation of apoferritin amyloid-like protein fibers is demonstrated herein for the first time. The morphology, size and stiffness of these one-dimensional structures are comparable to the fibers formed by β-lactoglobulin, a protein frequently used as a model in the study of amyloid-like fibrillar proteins. Nanometer-sized globular apoferritin is capable of self-assembling to form 1D micrometer-sized structures after being subjected to a heating process. Depending on the experimental conditions, fibers with different morphologies and sizes are obtained. The wire-like protein structure is rich in functional groups and allows chemical functionalization with diverse quantum dots (QD), as well as with different Alexa Fluor (AF) dyes, leading to hybrid fluorescent fibers with variable emission wavelengths, from green to near infrared, depending on the QD and AFs coupled. For fibers containing the pair AF488 and AF647, efficient fluorescence energy transfer from the covalently coupled donor (AF488) to acceptor tags (AF647) takes place. Apoferritin fibers are proposed here as a new promising template for obtaining hybrid functional materials.

Thermoreversible and Injectable ABC Polypeptoid Hydrogels: Controlling the Hydrogel Properties through Molecular Design

A series of ABC triblock copolypeptoids [i.e., poly(N-allyl glycine)-b-poly(N-methyl glycine)-b-poly(N-decyl glycine) (AMD)] with well-defined structure and varying composition have been synthesized by sequential primary amine-initiated ring-opening polymerization of the corresponding N-substituted N-carboxyanhydride monomers (Al-NCA, Me-NCA, and De-NCA). The ABC block copolypeptoids undergo sol-to-gel transitions with increasing temperature in water and biological media at low concentrations (2.5-10 wt %). The sol-gel transition is rapid and fully reversible with a narrow transition window, evidenced by the rheological measurements. The gelation temperature (Tgel) and mechanical stiffness of the hydrogels are highly tunable: Tgel in the 26.2-60.0 °C range, the storage modulus (G') and Young's modulus (E) in the 0.2-780 Pa and 0.5-2346 Pa range, respectively, at the physiological temperature (37 °C) can be readily accessed by controlling the block copolypeptoid composition and the polymer solution concentration. The hydrogel is injectable through a 24 gauge syringe needle and maintains their shape upon in contact with surfaces or water baths that are kept above the sol-gel transition temperature. The hydrogels exhibit minimal cytotoxicity toward human adipose derived stem cells (hASCs), evidenced from both alamarBlue and PicoGreen assays. Furthermore, quantitative PCR analysis revealed significant up-regulation of the Col2a1 gene and down-regulation of ANGPT1 gene, suggesting that the hydrogel exhibit biological activity in inducing chondrogenesis of hASCs. It was also demonstrated that the hydrogel can be used to quantitatively encapsulate water-soluble enzymes (e.g., horseradish peroxidase) by manipulating the sol-gel transition. The enzymatic activity of HRP remain unperturbed after encapsulation at 37 °C for up to 7 d, suggesting that the hydrogel does not adversely affect the enzyme structure and thereby the enzymatic activity. These results suggest that the polypeptoid hydrogel a promising synthetic platform for tissue engineering or protein storage applications.

Amyloid Templated Gold Aerogels

Amyloid fibril-based ultralow-density aerogels are designed by functionalization with gold nanoparticles and microcrystals, leading to hybrids of unprecedented lightness and functionality. By changing the colloidal gold shape, size, and concentration, the gold composition can be tuned to reach contents ≥20 kt equivalent, yet at densities ≈10(3) lighter than any equivalent gold alloys, and combining unique features such as porosity, catalytic properties, pressure sensing, and autofluorescence.

Effect of Zn2+ ions on the assembly of amylin oligomers: insight into the molecular mechanisms

High and low concentrations of Zn²⁺ ions decrease the polymorphism of amylin oligomers and do not affect their cross β-beta structures.

Hybrid Amyloid Membranes for Continuous Flow Catalysis

Amyloid fibrils are promising nanomaterials for technological applications such as biosensors, tissue engineering, drug delivery, and optoelectronics. Here we show that amyloid-metal nanoparticle hybrids can be used both as efficient active materials for wet catalysis and as membranes for continuous flow catalysis applications. Initially, amyloid fibrils generated in vitro from the nontoxic β-lactoglobulin protein act as templates for the synthesis of gold and palladium metal nanoparticles from salt precursors. The resulting hybrids possess catalytic features as demonstrated by evaluating their activity in a model catalytic reaction in water, e.g., the reduction of 4-nitrophenol into 4-aminophenol, with the rate constant of the reduction increasing with the concentration of amyloid-nanoparticle hybrids. Importantly, the same nanoparticles adsorbed onto fibrils surface show improved catalytic efficiency compared to the same unattached particles, pointing at the important role played by the amyloid fibril templates. Then, filter membranes are prepared from the metal nanoparticle-decorated amyloid fibrils by vacuum filtration. The resulting membranes serve as efficient flow catalysis active materials, with a complete catalytic conversion achieved within a single flow passage of a feeding solution through the membrane.

Ferric Ions Inhibit the Amyloid Fibrillation of β-Lactoglobulin at High Temperature

The energetics of amyloid fibrillar aggregation of β-lactoglobulin (βLG) following incubation at high temperature and acid pH was studied by differential scanning calorimetry in the presence of Cu(2+) or Fe(3+) cations, and without any metal. Cu(2+) and metal-free protein solutions showed a distinct exothermic response that disappeared almost completely when the Fe(3+) molar concentration was ten times greater than the βLG concentration. Thioflavin T fluorescence studies in solution and atomic force microscopy analysis of the deposit left on flat mica substrates by heat-incubated βLG solutions correlated the absence of exothermic response of Fe(3+)-βLG solutions with a lack of fibril production. In contrast, abundant fibril deposits were observed for Cu(2+)-βLG solutions, with a rich polymorphism of multistrand fibrillar structures. Electron paramagnetic resonance revealed that Fe(3+) permanently binds to βLG in the aggregate state whereas Cu(2+) plays a catalytic role without binding to the protein. We propose that Fe(3+) inhibits fibril production after binding to a key region of the protein sequence, possibly interfering with the nucleation step of the fibrillation process and opening a nonfibrillar aggregation pathway. These findings suggest that transition metal ions can be utilized to effectively modulate protein self-assembly into a variety of structures with distinct morphologies at the nanoscale level.