1
|
Song C, Yu Z, Feng W, Sun K, Wen C, Zhang S, Yu S, Li X. A Flexible Temperature Sensor Integrated at Needle Tip for In Situ Acupoint Temperature Monitoring. MICROMACHINES 2024; 15:924. [PMID: 39064434 PMCID: PMC11278890 DOI: 10.3390/mi15070924] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/19/2024] [Revised: 07/12/2024] [Accepted: 07/17/2024] [Indexed: 07/28/2024]
Abstract
Temperature can reflect vital activities, and researchers have attempted to guide Chinese medicine diagnosis and treatment by observing acupoint temperature changes. Integrating a temperature sensor at the needle tip enables in situ acupoint temperature measurement. However, the sensor needles for acupoint temperature monitoring designed in previous studies were fabricated by manually soldering thermistor beads and metal wires, making mass production difficult. In this work, using MEMS manufacturing technology, a flexible temperature sensor that can be integrated at the needle tip is proposed and can be mass-produced on silicon wafers. The sensor uses a Pt thermistor as the temperature-sensing element and has a slender flexible structure with dimensions of 125 μm width by 3.2 cm length. As the sensor is inserted into a hollow needle, the Pt thermistor is glued to the needle tip. In the temperature range of 30 °C to 50 °C, the fabricated temperature sensor has a sensitivity of 5.00 Ω∙°C-1, a nonlinearity of ±0.39%FS, and a repeatability error of ±2.62%FS. Additionally, the sensor has been applied to in vivo acupoint temperature monitoring experiments in rats and demonstrated good performance, suggesting its promise for future research on acupoint temperature.
Collapse
Affiliation(s)
- Ci Song
- State Key Laboratory of Transducer Technology, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200050, China; (C.S.); (W.F.); (K.S.)
- University of Chinese Academy of Sciences, Beijing 100049, China
| | - Zheng Yu
- School of Intelligent Medicine, Chengdu University of Traditional Chinese Medicine, Chengdu 611137, China; (Z.Y.); (C.W.)
| | - Weiwen Feng
- State Key Laboratory of Transducer Technology, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200050, China; (C.S.); (W.F.); (K.S.)
- University of Chinese Academy of Sciences, Beijing 100049, China
| | - Ke Sun
- State Key Laboratory of Transducer Technology, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200050, China; (C.S.); (W.F.); (K.S.)
| | - Chuanbiao Wen
- School of Intelligent Medicine, Chengdu University of Traditional Chinese Medicine, Chengdu 611137, China; (Z.Y.); (C.W.)
| | - Shengyan Zhang
- Acupuncture and Tuina School, Chengdu University of Traditional Chinese Medicine, Chengdu 611137, China; (S.Z.)
| | - Shuguang Yu
- Acupuncture and Tuina School, Chengdu University of Traditional Chinese Medicine, Chengdu 611137, China; (S.Z.)
| | - Xinxin Li
- State Key Laboratory of Transducer Technology, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200050, China; (C.S.); (W.F.); (K.S.)
- University of Chinese Academy of Sciences, Beijing 100049, China
| |
Collapse
|
2
|
Zhang Y, Liu Y, Lu Y, Gong S, Haick H, Cheng W, Wang Y. Tailor-Made Gold Nanomaterials for Applications in Soft Bioelectronics and Optoelectronics. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2024:e2405046. [PMID: 39022844 DOI: 10.1002/adma.202405046] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/08/2024] [Revised: 06/02/2024] [Indexed: 07/20/2024]
Abstract
In modern nanoscience and nanotechnology, gold nanomaterials are indispensable building blocks that have demonstrated a plethora of applications in catalysis, biology, bioelectronics, and optoelectronics. Gold nanomaterials possess many appealing material properties, such as facile control over their size/shape and surface functionality, intrinsic chemical inertness yet with high biocompatibility, adjustable localized surface plasmon resonances, tunable conductivity, wide electrochemical window, etc. Such material attributes have been recently utilized for designing and fabricating soft bioelectronics and optoelectronics. This motivates to give a comprehensive overview of this burgeoning field. The discussion of representative tailor-made gold nanomaterials, including gold nanocrystals, ultrathin gold nanowires, vertically aligned gold nanowires, hard template-assisted gold nanowires/gold nanotubes, bimetallic/trimetallic gold nanowires, gold nanomeshes, and gold nanosheets, is begun. This is followed by the description of various fabrication methodologies for state-of-the-art applications such as strain sensors, pressure sensors, electrochemical sensors, electrophysiological devices, energy-storage devices, energy-harvesting devices, optoelectronics, and others. Finally, the remaining challenges and opportunities are discussed.
Collapse
Affiliation(s)
- Yujie Zhang
- Department of Chemical Engineering, Guangdong Technion - Israel Institute of Technology, 241 Daxue Road, Shantou, Guangdong, 515063, China
- The Wolfson Department of Chemical Engineering, Technion - Israel Institute of Technology, Haifa, 3200003, Israel
| | - Yi Liu
- Department of Chemical Engineering, Guangdong Technion - Israel Institute of Technology, 241 Daxue Road, Shantou, Guangdong, 515063, China
- The Wolfson Department of Chemical Engineering, Technion - Israel Institute of Technology, Haifa, 3200003, Israel
| | - Yuerui Lu
- School of Engineering, College of Engineering, Computing and Cybernetics, The Australian National University, Canberra, ACT, 2601, Australia
| | - Shu Gong
- School of Materials Science and Engineering, Central South University, Changsha, 410083, P. R. China
| | - Hossam Haick
- The Wolfson Department of Chemical Engineering, Technion - Israel Institute of Technology, Haifa, 3200003, Israel
| | - Wenlong Cheng
- School of Biomedical Engineering, The University of Sydney, Darlington, NSW, 2008, Australia
| | - Yan Wang
- Department of Chemical Engineering, Guangdong Technion - Israel Institute of Technology, 241 Daxue Road, Shantou, Guangdong, 515063, China
- The Wolfson Department of Chemical Engineering, Technion - Israel Institute of Technology, Haifa, 3200003, Israel
- Key Laboratory of Science and Engineering for Health and Medicine of Guangdong Higher Education Institutes, Guangdong Technion - Israel Institute of Technology, Shantou, Guangdong, 515063, China
- Guangdong Provincial Key Laboratory of Materials and Technologies for Energy Conversion, Guangdong Technion - Israel Institute of Technology, 241 Daxue Road, Shantou, Guangdong, 515063, China
| |
Collapse
|
3
|
Neettiyath A, Chung K, Liu W, Lee LP. Nanoplasmonic sensors for extracellular vesicles and bacterial membrane vesicles. NANO CONVERGENCE 2024; 11:23. [PMID: 38918255 PMCID: PMC11199476 DOI: 10.1186/s40580-024-00431-8] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/23/2024] [Accepted: 06/03/2024] [Indexed: 06/27/2024]
Abstract
Extracellular vesicles (EVs) are promising tools for the early diagnosis of diseases, and bacterial membrane vesicles (MVs) are especially important in health and environment monitoring. However, detecting EVs or bacterial MVs presents significant challenges for the clinical translation of EV-based diagnostics. In this Review, we provide a comprehensive discussion on the basics of nanoplasmonic sensing and emphasize recent developments in nanoplasmonics-based optical sensors to effectively identify EVs or bacterial MVs. We explore various nanoplasmonic sensors tailored for EV or bacterial MV detection, emphasizing the application of localized surface plasmon resonance through gold nanoparticles and their multimers. Additionally, we highlight advanced EV detection techniques based on surface plasmon polaritons using plasmonic thin film and nanopatterned structures. Furthermore, we evaluate the improved detection capability of surface-enhanced Raman spectroscopy in identifying and classifying these vesicles, aided by plasmonic nanostructures. Nanoplasmonic sensing techniques have remarkable precision and sensitivity, making them a potential tool for accurate EV detection in clinical applications, facilitating point-of-care molecular diagnostics. Finally, we summarize the challenges associated with nanoplasmonic EV or bacterial MV sensors and offer insights into potential future directions for this evolving field.
Collapse
Affiliation(s)
- Aparna Neettiyath
- Renal Division and Division of Engineering in Medicine, Department of Medicine, Brigham and Women's Hospital, Boston, MA 02115, USA
- Harvard Medical School, Harvard University, Boston, MA 02115, USA
| | - Kyungwha Chung
- Renal Division and Division of Engineering in Medicine, Department of Medicine, Brigham and Women's Hospital, Boston, MA 02115, USA
- Harvard Medical School, Harvard University, Boston, MA 02115, USA
- Institute of Quantum Biophysics, Department of Biophysics, Sungkyunkwan University, Suwon 16419, Korea
| | - Wenpeng Liu
- Renal Division and Division of Engineering in Medicine, Department of Medicine, Brigham and Women's Hospital, Boston, MA 02115, USA
- Harvard Medical School, Harvard University, Boston, MA 02115, USA
| | - Luke P Lee
- Renal Division and Division of Engineering in Medicine, Department of Medicine, Brigham and Women's Hospital, Boston, MA 02115, USA.
- Harvard Medical School, Harvard University, Boston, MA 02115, USA.
- Department of Bioengineering, University of California, Berkeley, CA 94720, USA.
- Department of Electrical Engineering and Computer Science, University of California, Berkeley, CA 94720, USA.
- Institute of Quantum Biophysics, Department of Biophysics, Sungkyunkwan University, Suwon 16419, Korea.
- Department of Chemistry and Nano Science, Ewha Womans University, Seoul 03760, Korea.
| |
Collapse
|
4
|
Najafi M, Forestier E, Safarpour M, Ceseracciu L, Zych A, Bagheri A, Bertolacci L, Athanassiou A, Bayer I. Biodegradable polylactic acid emulsion ink based on carbon nanotubes and silver for printed pressure sensors. Sci Rep 2024; 14:10988. [PMID: 38744852 PMCID: PMC11094035 DOI: 10.1038/s41598-024-60315-z] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/22/2023] [Accepted: 04/21/2024] [Indexed: 05/16/2024] Open
Abstract
Investigating biodegradable and biocompatible materials for electronic applications can lead to tangible outcomes such as developing green-electronic devices and reducing the amount of e-waste. The proposed emulsion-based conducting ink formulation takes into consideration circular economy and green principles throughout the entire process, from the selection of materials to the production process. The ink is formulated using the biopolymer polylactic acid dissolved in a sustainable solvent mixed with water, along with conductive carbon nanotubes (CNTs) and silver flakes as fillers. Hybrid conductive fillers can lower the percolation threshold of the ink and the production costs, while maintaining excellent electrical properties. The coating formed after the deposition of the ink, undergoes isothermal treatment at different temperatures and durations to improve its adhesion and electrical properties. The coating's performance was evaluated by creating an eight-finger interdigitated sensor using a Voltera PCB printer. The sensor demonstrates exceptional performance when exposed to various loading and unloading pressures within the 0.2-500.0 kPa range. The results show a consistent correlation between the change in electrical resistance and the stress caused by the applied load. The ink is biodegradable in marine environments, which helps avoiding its accumulation in the ecosystem over time.
Collapse
Affiliation(s)
- Maedeh Najafi
- Smart Materials, Istituto Italiano di Tecnologia, Via Morego 30, 16163, Genoa, Italy.
| | - Emilie Forestier
- Smart Materials, Istituto Italiano di Tecnologia, Via Morego 30, 16163, Genoa, Italy
- iCub Tech, Istituto Italiano di Tecnologia, Via S. Quirico 9d, 16163, Genoa, Italy
| | - Milad Safarpour
- Smart Materials, Istituto Italiano di Tecnologia, Via Morego 30, 16163, Genoa, Italy
| | - Luca Ceseracciu
- Materials Characterization, Istituto Italiano di Tecnologia, Via Morego 30, 16163, Genoa, Italy
| | - Arkadiusz Zych
- Smart Materials, Istituto Italiano di Tecnologia, Via Morego 30, 16163, Genoa, Italy
| | - Ahmad Bagheri
- Graphene Labs, Istituto Italiano di Tecnologia, Via Morego 30, 16163, Genoa, Italy
| | - Laura Bertolacci
- Smart Materials, Istituto Italiano di Tecnologia, Via Morego 30, 16163, Genoa, Italy
| | | | - Ilker Bayer
- Smart Materials, Istituto Italiano di Tecnologia, Via Morego 30, 16163, Genoa, Italy.
| |
Collapse
|
5
|
Del Bosque A, Sánchez-Romate XF, Sánchez M, Ureña A. Toward flexible piezoresistive strain sensors based on polymer nanocomposites: a review on fundamentals, performance, and applications. NANOTECHNOLOGY 2024; 35:292003. [PMID: 38621367 DOI: 10.1088/1361-6528/ad3e87] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/19/2023] [Accepted: 04/15/2024] [Indexed: 04/17/2024]
Abstract
The fundamentals, performance, and applications of piezoresistive strain sensors based on polymer nanocomposites are summarized herein. The addition of conductive nanoparticles to a flexible polymer matrix has emerged as a possible alternative to conventional strain gauges, which have limitations in detecting small strain levels and adapting to different surfaces. The evaluation of the properties or performance parameters of strain sensors such as the elongation at break, sensitivity, linearity, hysteresis, transient response, stability, and durability are explained in this review. Moreover, these nanocomposites can be exposed to different environmental conditions throughout their lifetime, including different temperature, humidity or acidity/alkalinity levels, that can affect performance parameters. The development of flexible piezoresistive sensors based on nanocomposites has emerged in recent years for applications related to the biomedical field, smart robotics, and structural health monitoring. However, there are still challenges to overcome in designing high-performance flexible sensors for practical implementation. Overall, this paper provides a comprehensive overview of the current state of research on flexible piezoresistive strain sensors based on polymer nanocomposites, which can be a viable option to address some of the major technological challenges that the future holds.
Collapse
Affiliation(s)
- Antonio Del Bosque
- Technology, Instruction and Design in Engineering and Education Research Group (TiDEE.rg), Catholic University of Ávila, C/Canteros s/n, E-05005 Ávila, Spain
| | - Xoan F Sánchez-Romate
- Materials Science and Engineering Area, Higher School of Experimental Sciences and Technology, Rey Juan Carlos University, C/Tulipán s/n, Móstoles, E-28933 Madrid, Spain
| | - María Sánchez
- Materials Science and Engineering Area, Higher School of Experimental Sciences and Technology, Rey Juan Carlos University, C/Tulipán s/n, Móstoles, E-28933 Madrid, Spain
- Instituto de Tecnologías Para la Sostenibilidad, Rey Juan Carlos University, C/Tulipán s/n, E-28933 Móstoles, Madrid, Spain
| | - Alejandro Ureña
- Materials Science and Engineering Area, Higher School of Experimental Sciences and Technology, Rey Juan Carlos University, C/Tulipán s/n, Móstoles, E-28933 Madrid, Spain
- Instituto de Tecnologías Para la Sostenibilidad, Rey Juan Carlos University, C/Tulipán s/n, E-28933 Móstoles, Madrid, Spain
| |
Collapse
|
6
|
López-Peña G, Ortiz-Mansilla E, Arranz A, Bogdan N, Manso-Silván M, Martín Rodríguez E. Non-invasive paper-based sensors containing rare-earth-doped nanoparticles for the detection of D-glucose. Colloids Surf B Biointerfaces 2024; 239:113934. [PMID: 38729020 DOI: 10.1016/j.colsurfb.2024.113934] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/24/2024] [Revised: 04/15/2024] [Accepted: 04/28/2024] [Indexed: 05/12/2024]
Abstract
Today, diabetes mellitus is one of the most common diseases that affects the population on a worldwide scale. Patients suffering from this disease are required to control their blood-glucose levels several times a day through invasive methods such as piercing their fingers. Our NaGdF4: 5% Er3+, 3% Nd3+ nanoparticles demonstrate a remarkable ability to detect D-glucose levels by analysing alterations in their red-to-green ratio, since this sensitivity arises from the interaction between the nanoparticles and the OH groups present in the D-glucose molecules, resulting in discernible changes in the emission of the green and red bands. These luminescent sensors were implemented and tested on paper substrates, offering a portable, low-cost and enzyme-free solution for D-glucose detection in aqueous solutions with a limit of detection of 22 mg/dL. With this, our study contributes to the development of non-invasive D-glucose sensors, holding promising implications for managing diabetes and improving overall patient well-being with possible future applications in D-glucose sensing through tear fluid.
Collapse
Affiliation(s)
- Gabriel López-Peña
- Departamento de Física Aplicada and Instituto de Ciencia de Materiales Nicolás Cabrera, Universidad Autónoma de Madrid, C/ Francisco Tomás y Valiente 7, Madrid 28049, Spain
| | - Eva Ortiz-Mansilla
- Departamento de Física Teórica de la Materia Condensada, Universidad Autónoma de Madrid, C/ Francisco Tomás y Valiente 7, Madrid 28049, Spain
| | - Antonio Arranz
- Departamento de Física Aplicada and Instituto de Ciencia de Materiales Nicolás Cabrera, Universidad Autónoma de Madrid, C/ Francisco Tomás y Valiente 7, Madrid 28049, Spain
| | - Nicoleta Bogdan
- Department of Chemistry and Biochemistry, Concordia University, Montreal, QC, Canada
| | - Miguel Manso-Silván
- Departamento de Física Aplicada and Instituto de Ciencia de Materiales Nicolás Cabrera, Universidad Autónoma de Madrid, C/ Francisco Tomás y Valiente 7, Madrid 28049, Spain; Centro de Micro-Análisis de Materiales, Universidad Autónoma de Madrid, C/ Francisco Tomás y Valiente 7, Madrid 28049, Spain
| | - Emma Martín Rodríguez
- Departamento de Física Aplicada and Instituto de Ciencia de Materiales Nicolás Cabrera, Universidad Autónoma de Madrid, C/ Francisco Tomás y Valiente 7, Madrid 28049, Spain; Nanomaterials for BioImaging Group, Instituto Ramón y Cajal de Investigación Sanitaria IRYCIS, Ctra. de Colmenar km 9,300, Madrid 28034, Spain.
| |
Collapse
|
7
|
Hu T, Sheng B. A Highly Sensitive Strain Sensor with Wide Linear Sensing Range Prepared on a Hybrid-Structured CNT/Ecoflex Film via Local Regulation of Strain Distribution. ACS APPLIED MATERIALS & INTERFACES 2024. [PMID: 38603806 DOI: 10.1021/acsami.4c00648] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 04/13/2024]
Abstract
With the development of information technology, high-performance wearable strain sensors with high sensitivity and stretchability have played a significant role in motion detection. However, many high-sensitivity and outstanding-stretchability strain sensors possess a limited linear sensing range, which limits the enhancement of the flexible strain sensors' performance. Herein, we develop a hybrid-structured carbon nanotube (CNT)/Ecoflex strain sensor with laser-engraved grooves along with punched circular holes in a composite CNT/Ecoflex film by vacuum filtration and permeation. By optimizing the distribution of grooves and circular holes, the strain in the sensing layer can be locally regulated, which alters the morphology of cracks under strain and allows the hybrid-structured CNT/Ecoflex strain sensor to simultaneously exhibit high sensitivity (GF = 43.8) as well as a wide linear sensing range (200%). On the basis of excellent performance, the hybrid-structured CNT/Ecoflex strain sensor is capable of detecting movements in various parts of the human body, including movements of larynx and joint bending.
Collapse
Affiliation(s)
- Tao Hu
- School of Optical-Electrical and Computer Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China
- Shanghai Key Laboratory of Modern Optical Systems, Engineering Research Center of Optical Instruments and Systems, Shanghai 200093, China
| | - Bin Sheng
- School of Optical-Electrical and Computer Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China
- Shanghai Key Laboratory of Modern Optical Systems, Engineering Research Center of Optical Instruments and Systems, Shanghai 200093, China
| |
Collapse
|
8
|
Zhu D, Duan S, Liu J, Diao S, Hong J, Xiang S, Wei X, Xiao P, Xia J, Lei W, Wang B, Shi Q, Wu J. A double-crack structure for bionic wearable strain sensors with ultra-high sensitivity and a wide sensing range. NANOSCALE 2024; 16:5409-5420. [PMID: 38380994 DOI: 10.1039/d3nr05476d] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/22/2024]
Abstract
Flexible strain sensors are crucial in fully monitoring human motion, and they should have a wide sensing range and ultra-high sensitivity. Herein, inspired by lyriform organs, a flexible strain sensor based on the double-crack structure is designed. An MXene layer and an Au layer with cracks are constructed on both sides of the insulated polydimethylsiloxane (PDMS) film, forming an equivalent parallel circuit that guarantees the integrity of the conductive path under a large strain. The rapid disconnection of the crack junctions causes a significant change in the resistance value. Due to the effect of cracks on the conductive path, the sensitivity of the sensor is largely improved. Benefiting from the double-crack structure, the as-obtained sensor shows ultra-high sensitivity (maximum gauge factor of up to 14 373.6), a wide working range (up to 21%), a fast response time (183 ms) and excellent dynamical stability (almost no performance loss after 1000 stretching cycles and different frequency cycles). In practical applications, the sensor is applied to different parts of the human body to sense the deformation of the skin, demonstrating its great potential application value in human physiological detection and the human-machine interaction. This study can provide new ideas for preparing high-performance flexible strain sensors.
Collapse
Affiliation(s)
- Di Zhu
- Joint International Research Laboratory of Information Display and Visualization, School of Electronic Science and Engineering, Southeast University, 210096, China.
| | - Shengshun Duan
- Joint International Research Laboratory of Information Display and Visualization, School of Electronic Science and Engineering, Southeast University, 210096, China.
| | - Jiachen Liu
- Joint International Research Laboratory of Information Display and Visualization, School of Electronic Science and Engineering, Southeast University, 210096, China.
| | - Shanyan Diao
- Joint International Research Laboratory of Information Display and Visualization, School of Electronic Science and Engineering, Southeast University, 210096, China.
| | - Jianlong Hong
- Joint International Research Laboratory of Information Display and Visualization, School of Electronic Science and Engineering, Southeast University, 210096, China.
| | - Shengxin Xiang
- Joint International Research Laboratory of Information Display and Visualization, School of Electronic Science and Engineering, Southeast University, 210096, China.
| | - Xiao Wei
- Joint International Research Laboratory of Information Display and Visualization, School of Electronic Science and Engineering, Southeast University, 210096, China.
| | - Peng Xiao
- State Grid Jiangsu Electric Power Co., Ltd, Research Institute, Nanjing, 211103, Jiangsu, P. R. China.
| | - Jun Xia
- Joint International Research Laboratory of Information Display and Visualization, School of Electronic Science and Engineering, Southeast University, 210096, China.
| | - Wei Lei
- Joint International Research Laboratory of Information Display and Visualization, School of Electronic Science and Engineering, Southeast University, 210096, China.
| | - Baoping Wang
- Joint International Research Laboratory of Information Display and Visualization, School of Electronic Science and Engineering, Southeast University, 210096, China.
| | - Qiongfeng Shi
- Joint International Research Laboratory of Information Display and Visualization, School of Electronic Science and Engineering, Southeast University, 210096, China.
| | - Jun Wu
- Joint International Research Laboratory of Information Display and Visualization, School of Electronic Science and Engineering, Southeast University, 210096, China.
| |
Collapse
|
9
|
Cetinkaya YN, Bulut O, Oktem HA, Yilmaz MD. Fluorescent silica nanoparticles as nano-chemosensors for the sequential detection of Pb 2+ ions and bacterial-spore biomarker dipicolinic acid (DPA) in aqueous solution. SPECTROCHIMICA ACTA. PART A, MOLECULAR AND BIOMOLECULAR SPECTROSCOPY 2023; 303:123222. [PMID: 37542871 DOI: 10.1016/j.saa.2023.123222] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/28/2023] [Revised: 07/07/2023] [Accepted: 07/30/2023] [Indexed: 08/07/2023]
Abstract
Herein, we report fluorescein-labelled silica nanoparticles (FSNP) which serve as fluorescent nano-chemosensors for sequential detection of Pb2+ (which is a toxic heavy metal) and dipicolinic acid (DPA) (which is a distinctive indicator biomarker of bacterial spores) with high sensitivity and selectivity. The fluorescence of FSNP is quenched because of the complex formation between Pb2+ ions and surface amide groups, however, the fluorescence is recovered in contact with DPA, resulting from the association of DPA with surface bound Pb2+ ions. FSNP-Pb2+ complexes show high sensitivity towards DPA with a low detection limit of 850 nM which is approximately seventy times lower than the infectious dosage of bacterial spores (60 μM). Lateral flow test platform was further developed to show the applicability and practicability of our system.
Collapse
Affiliation(s)
- Yagmur Nur Cetinkaya
- Department of Materials Science and Nanotechnology, Graduate School of Natural and Applied Sciences, Konya Food and Agriculture University, 42080 Konya, Turkey
| | - Onur Bulut
- Department of Bioengineering, Faculty of Engineering and Architecture, Konya Food and Agriculture University, 42080 Konya, Turkey
| | - Huseyin Avni Oktem
- Department of Biological Sciences, Middle East Technical University, 06800 Ankara, Turkey; Nanobiz Technology Inc., Gallium Block No: 27 / 218, METU Technopolis, Ankara, Turkey
| | - M Deniz Yilmaz
- Department of Basic Sciences, Faculty of Engineering, Necmettin Erbakan University, 42140 Konya, Turkey; BITAM-Science and Technology Research and Application Center, Necmettin Erbakan University, 42140 Konya, Turkey.
| |
Collapse
|
10
|
Javanbakht S, Darvishi S, Dorchei F, Hosseini-Ghalehno M, Dehghani M, Pooresmaeil M, Suzuki Y, Ul Ain Q, Ruiz Rubio L, Shaabani A, Hayashita T, Namazi H, Heydari A. Cyclodextrin Host-Guest Recognition in Glucose-Monitoring Sensors. ACS OMEGA 2023; 8:33202-33228. [PMID: 37744789 PMCID: PMC10515351 DOI: 10.1021/acsomega.3c03746] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/28/2023] [Accepted: 08/23/2023] [Indexed: 09/26/2023]
Abstract
Diabetes mellitus is a prevalent chronic health condition that has caused millions of deaths worldwide. Monitoring blood glucose levels is crucial in diabetes management, aiding in clinical decision making and reducing the incidence of hypoglycemic episodes, thereby decreasing morbidity and mortality rates. Despite advancements in glucose monitoring (GM), the development of noninvasive, rapid, accurate, sensitive, selective, and stable systems for continuous monitoring remains a challenge. Addressing these challenges is critical to improving the clinical utility of GM technologies in diabetes management. In this concept, cyclodextrins (CDs) can be instrumental in the development of GM systems due to their high supramolecular recognition capabilities based on the host-guest interaction. The introduction of CDs into GM systems not only impacts the sensitivity, selectivity, and detection limit of the monitoring process but also improves biocompatibility and stability. These findings motivated the current review to provide a comprehensive summary of CD-based blood glucose sensors and their chemistry of glucose detection, efficiency, and accuracy. We categorize CD-based sensors into four groups based on their modification strategies, including CD-modified boronic acid, CD-modified mediators, CD-modified nanoparticles, and CD-modified functionalized polymers. These findings shed light on the potential of CD-based sensors as a promising tool for continuous GM in diabetes mellitus management.
Collapse
Affiliation(s)
- Siamak Javanbakht
- Research
Laboratory of Dendrimers and Natural Polymers, Faculty of Chemistry, University of Tabriz, P.O. Box 51666, Tabriz, Iran
| | - Sima Darvishi
- Faculty
of Chemistry, Khajeh Nasir Toosi University, Tehran, Iran
| | - Faeze Dorchei
- Polymer
Institute of the Slovak Academy of Sciences, Dúbravská cesta 9, 845 41 Bratislava, Slovakia
| | | | - Marjan Dehghani
- Department
of Chemistry, Shahid Bahonar University
of Kerman, Kerman 76169, Iran
| | - Malihe Pooresmaeil
- Research
Laboratory of Dendrimers and Natural Polymers, Faculty of Chemistry, University of Tabriz, P.O. Box 51666, Tabriz, Iran
| | - Yota Suzuki
- Department
of Materials and Life Sciences, Faculty of Science and Technology, Sophia University, 7-1, Kioi-cho, Chiyoda-ku, Tokyo 102-8554, Japan
- Graduate
School of Science and Engineering, Saitama
University, Saitama 338-8570, Japan
| | - Qurat Ul Ain
- Department
of Materials Engineering, School of Chemical and Materials Engineering, National University of Sciences and Technology, Islamabad H-12, Pakistan
| | - Leire Ruiz Rubio
- Macromolecular
Chemistry Group (LQM), Department of Physical Chemistry, Faculty of
Science and Technology, University of Basque
Country (UPV/EHU), Leioa 48940, Spain
- Basque
Centre for Materials, Applications and Nanostructures
(BCMaterials), UPV/EHU
Science Park, Leioa 48940, Spain
| | - Ahmad Shaabani
- Faculty
of Chemistry, Shahid Beheshti University, Tehran, Iran
| | - Takashi Hayashita
- Department
of Materials and Life Sciences, Faculty of Science and Technology, Sophia University, 7-1, Kioi-cho, Chiyoda-ku, Tokyo 102-8554, Japan
| | - Hassan Namazi
- Research
Laboratory of Dendrimers and Natural Polymers, Faculty of Chemistry, University of Tabriz, P.O. Box 51666, Tabriz, Iran
- Research
Center for Pharmaceutical Nanotechnology (RCPN), Tabriz University of Medical Science, Tabriz, Iran
| | - Abolfazl Heydari
- Polymer
Institute of the Slovak Academy of Sciences, Dúbravská cesta 9, 845 41 Bratislava, Slovakia
- National
Institute of Rheumatic Diseases, Nábrežie I. Krasku 4782/4, 921 12 Piešt’any, Slovakia
| |
Collapse
|
11
|
Meng L, Vu TV, Criscenti LJ, Ho TA, Qin Y, Fan H. Theoretical and Experimental Advances in High-Pressure Behaviors of Nanoparticles. Chem Rev 2023; 123:10206-10257. [PMID: 37523660 DOI: 10.1021/acs.chemrev.3c00169] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 08/02/2023]
Abstract
Using compressive mechanical forces, such as pressure, to induce crystallographic phase transitions and mesostructural changes while modulating material properties in nanoparticles (NPs) is a unique way to discover new phase behaviors, create novel nanostructures, and study emerging properties that are difficult to achieve under conventional conditions. In recent decades, NPs of a plethora of chemical compositions, sizes, shapes, surface ligands, and self-assembled mesostructures have been studied under pressure by in-situ scattering and/or spectroscopy techniques. As a result, the fundamental knowledge of pressure-structure-property relationships has been significantly improved, leading to a better understanding of the design guidelines for nanomaterial synthesis. In the present review, we discuss experimental progress in NP high-pressure research conducted primarily over roughly the past four years on semiconductor NPs, metal and metal oxide NPs, and perovskite NPs. We focus on the pressure-induced behaviors of NPs at both the atomic- and mesoscales, inorganic NP property changes upon compression, and the structural and property transitions of perovskite NPs under pressure. We further discuss in depth progress on molecular modeling, including simulations of ligand behavior, phase-change chalcogenides, layered transition metal dichalcogenides, boron nitride, and inorganic and hybrid organic-inorganic perovskites NPs. These models now provide both mechanistic explanations of experimental observations and predictive guidelines for future experimental design. We conclude with a summary and our insights on future directions for exploration of nanomaterial phase transition, coupling, growth, and nanoelectronic and photonic properties.
Collapse
Affiliation(s)
- Lingyao Meng
- Department of Chemistry & Chemical Biology, University of New Mexico, Albuquerque, New Mexico 87106, United States
| | - Tuan V Vu
- Geochemistry Department, Sandia National Laboratories, Albuquerque, New Mexico 87185, United States
| | - Louise J Criscenti
- Geochemistry Department, Sandia National Laboratories, Albuquerque, New Mexico 87185, United States
| | - Tuan A Ho
- Geochemistry Department, Sandia National Laboratories, Albuquerque, New Mexico 87185, United States
| | - Yang Qin
- Department of Chemical & Biomolecular Engineering, Institute of Materials Science, University of Connecticut, Mansfield, Connecticut 06269, United States
| | - Hongyou Fan
- Geochemistry Department, Sandia National Laboratories, Albuquerque, New Mexico 87185, United States
| |
Collapse
|
12
|
Amestoy A, Rangra A, Mansard V, Saya D, Pouget E, Mazaleyrat E, Severac F, Bergaud C, Oda R, Delville MH. Highly Stable Low-Strain Flexible Sensors Based on Gold Nanoparticles/Silica Nanohelices. ACS APPLIED MATERIALS & INTERFACES 2023; 15:39480-39493. [PMID: 37556291 DOI: 10.1021/acsami.3c05852] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 08/11/2023]
Abstract
Flexible strain sensors based on nanoparticle (NP) arrays show great potential for future applications such as electronic skin, flexible touchscreens, healthcare sensors, and robotics. However, even though these sensors can exhibit high sensitivity, they are usually not very stable under mechanical cycling and often exhibit large hysteresis, making them unsuitable for practical applications. In this work, strain sensors based on silica nanohelix (NH) arrays grafted with gold nanoparticles (AuNPs) can overcome these critical aspects. These 10 nm AuNPs are functionalized with mercaptopropionic acid (MPA) and different ratios of thiol-polyethylene glycol-carboxylic acid (HS-PEG7-COOH) to optimize the colloidal stability of the resulting NH@AuNPs nanocomposite suspensions, control their aggregation state, and tune the thickness of the insulating layer. They are then grafted covalently onto the surface of the NHs by chemical coupling. These nanomaterials exhibit a well-defined arrangement of AuNPs, which follows the helicity of the silica template. The modified NHs are then aligned by dielectrophoresis (DEP) between interdigitated electrodes on a flexible substrate. The flexibility, stability, and especially sensitivity of these sensors are then characterized by electromechanical measurements and scanning electron microscopy observations. These strain sensors based on NH@AuNPs nanocomposites are much more stable than those containing only nanoparticles and exhibit significantly reduced hysteresis and high sensitivity at very slight strains. They can retain their sensitivity even after 2 million consecutive cycles with virtually unchanged responsiveness. These improved performances come from their mechanical stability and the use of nanohelices as stable mechanical templates.
Collapse
Affiliation(s)
- Antoine Amestoy
- CNRS, Univ. Bordeaux, Bordeaux INP, ICMCB, UMR 5026, 87 avenue du Dr. A. Schweitzer, Pessac F-33608, France
- CNRS, Univ. Bordeaux, Bordeaux INP, Chimie et Biologie des Membranes et des Nanoobjets, 33607 Pessac, France
| | - Aarushee Rangra
- Laboratoire d'Analyse et d'Architecture des Systèmes, LAAS-CNRS, University of Toulouse, 7 avenue du Colonel Roche, Toulouse F-31400, France
| | - Vincent Mansard
- Laboratoire d'Analyse et d'Architecture des Systèmes, LAAS-CNRS, University of Toulouse, 7 avenue du Colonel Roche, Toulouse F-31400, France
| | - Daisuke Saya
- Laboratoire d'Analyse et d'Architecture des Systèmes, LAAS-CNRS, University of Toulouse, 7 avenue du Colonel Roche, Toulouse F-31400, France
| | - Emilie Pouget
- CNRS, Univ. Bordeaux, Bordeaux INP, Chimie et Biologie des Membranes et des Nanoobjets, 33607 Pessac, France
| | | | - Fabrice Severac
- NANOMADE LAB, 3 rue des Satellites, Toulouse F-31400, France
| | - Christian Bergaud
- Laboratoire d'Analyse et d'Architecture des Systèmes, LAAS-CNRS, University of Toulouse, 7 avenue du Colonel Roche, Toulouse F-31400, France
| | - Reiko Oda
- CNRS, Univ. Bordeaux, Bordeaux INP, Chimie et Biologie des Membranes et des Nanoobjets, 33607 Pessac, France
| | - Marie-Hélène Delville
- CNRS, Univ. Bordeaux, Bordeaux INP, ICMCB, UMR 5026, 87 avenue du Dr. A. Schweitzer, Pessac F-33608, France
| |
Collapse
|
13
|
Ye L, Li X, Yi X, Tang P, Chen M. A 3D Composited Flexible Sensor Based on Percolative Nanoparticle Arrays to Discriminate Coupled Pressure and Strain. SENSORS (BASEL, SWITZERLAND) 2023; 23:5956. [PMID: 37447805 DOI: 10.3390/s23135956] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/20/2023] [Revised: 06/16/2023] [Accepted: 06/21/2023] [Indexed: 07/15/2023]
Abstract
Flexible mechanical sensors based on nanomaterials operate on a deformation-response mechanism, making it challenging to discern different types of mechanical stimuli such as pressure and strain. Therefore, these sensors are susceptible to significant mechanical interference. Here, we introduce a multifunctional flexible sensor capable of discriminating coupled pressure and strain without cross-interference. Our design involves an elastic cantilever fixed on the pillar of the flexible main substrate, creating a three-dimensional (3D) substrate, and two percolative nanoparticle (NP) arrays are deposited on the cantilever and main substrate, respectively, as the sensing materials. The 3D flexible substrate could confine pressure/strain loading exclusively on the cantilever or main substrate, resulting in independent responses of the two nanoparticle arrays with no cross-interference. Benefitting from the quantum transport in nanoparticle arrays, our sensors demonstrate an exceptional sensitivity, enabling discrimination of subtle strains down to 1.34 × 10-4. Furthermore, the suspended cantilever with one movable end can enhance the pressure perception of the NP array, exhibiting a high sensitivity of -0.223 kPa-1 and an ultrahigh resolution of 4.24 Pa. This flexible sensor with multifunctional design will provide inspiration for the development of flexible mechanical sensors and the advancement of decoupling strategies.
Collapse
Affiliation(s)
- Linqi Ye
- College of Chemical Engineering, Zhejiang University of Technology, Hangzhou 310014, China
| | - Xinlei Li
- College of Chemical Engineering, Zhejiang University of Technology, Hangzhou 310014, China
| | - Xinle Yi
- College of Chemical Engineering, Zhejiang University of Technology, Hangzhou 310014, China
| | - Pan Tang
- College of Chemical Engineering, Zhejiang University of Technology, Hangzhou 310014, China
| | - Minrui Chen
- College of Chemical Engineering, Zhejiang University of Technology, Hangzhou 310014, China
| |
Collapse
|
14
|
Wu J, Li Y, Duan S, Wang Z, Jing X, Lin Y, Zhu D, Lei W, Shi Q, Tao L. Bioinspired Stretchable MXene Deformation-Insensitive Hydrogel Temperature Sensors for Plant and Skin Electronics. RESEARCH (WASHINGTON, D.C.) 2023; 6:0106. [PMID: 37275122 PMCID: PMC10237174 DOI: 10.34133/research.0106] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 01/12/2023] [Accepted: 03/15/2023] [Indexed: 06/07/2023]
Abstract
Temperature sensing is of high value in the wearable healthcare, robotics/prosthesis, and noncontact physiological monitoring. However, the common mechanic deformation, including pressing, bending, and stretching, usually causes undesirable feature size changes to the inner conductive network distribution of temperature sensors, which seriously influences the accuracy. Here, inspired by the transient receptor potential mechanism of biological thermoreceptors that could work precisely under various skin contortions, we propose an MXene/Clay/poly(N-isopropylacrylamide) (PNIPAM) (MCP) hydrogel with high stretchability, spike response, and deformation insensitivity. The dynamic spike response is triggered by the inner conductive network transformation from the 3-dimensional structure to the 2-dimensional surface after water being discharged at the threshold temperature. The water discharge is solely determined by the thermosensitivity of PNIPAM, which is free from mechanical deformation, so the MCP hydrogels can perform precise threshold temperature (32 °C) sensing under various deformation conditions, i.e., pressing and 15% stretching. As a proof of concept, we demonstrated the applications in plant electronics for the real-time surface temperature monitoring and skin electronics for communicating between human and machines. Our research opens venues for the accurate temperature-threshold sensation on the complicated surface and mechanical conditions.
Collapse
Affiliation(s)
- Jun Wu
- Joint International Research Laboratory of Information Display and Visualization, School of Electronic Science and Engineering,
Southeast University, Nanjing, Jiangsu 210096, China
| | - Yinghui Li
- Joint International Research Laboratory of Information Display and Visualization, School of Electronic Science and Engineering,
Southeast University, Nanjing, Jiangsu 210096, China
| | - Shengshun Duan
- Joint International Research Laboratory of Information Display and Visualization, School of Electronic Science and Engineering,
Southeast University, Nanjing, Jiangsu 210096, China
| | - Zhehan Wang
- School of Materials Science and Engineering,
Southeast University, Nanjing, Jiangsu 210096, China
| | - Xu Jing
- School of Materials Science and Engineering,
Southeast University, Nanjing, Jiangsu 210096, China
| | - Yucheng Lin
- Joint International Research Laboratory of Information Display and Visualization, School of Electronic Science and Engineering,
Southeast University, Nanjing, Jiangsu 210096, China
| | - Di Zhu
- Joint International Research Laboratory of Information Display and Visualization, School of Electronic Science and Engineering,
Southeast University, Nanjing, Jiangsu 210096, China
| | - Wei Lei
- Joint International Research Laboratory of Information Display and Visualization, School of Electronic Science and Engineering,
Southeast University, Nanjing, Jiangsu 210096, China
| | - Qiongfeng Shi
- Joint International Research Laboratory of Information Display and Visualization, School of Electronic Science and Engineering,
Southeast University, Nanjing, Jiangsu 210096, China
| | - Li Tao
- School of Materials Science and Engineering,
Southeast University, Nanjing, Jiangsu 210096, China
- Center of 2D Materials and Devices,
Southeast University, Nanjing, Jiangsu 210096, China
| |
Collapse
|
15
|
Ma Y, Zhao K, Han J, Han B, Wang M, Tong Z, Suhr J, Xiao L, Jia S, Chen X. Pressure Sensor Based on a Lumpily Pyramidal Vertical Graphene Film with a Broad Sensing Range and High Sensitivity. ACS APPLIED MATERIALS & INTERFACES 2023; 15:13813-13821. [PMID: 36857658 DOI: 10.1021/acsami.3c01175] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/18/2023]
Abstract
Wearable sensors are vital for the development of electronic skins to improve health monitoring, robotic tactile sensing, and artificial intelligence. Active materials and the construction of microstructures in the sensitive layer are the dominating approaches to improve the performance of pressure sensors. However, it is still a challenge to simultaneously achieve a sensor with a high sensitivity and a wide detection range. In this work, using three-dimensional (3D) vertical graphene (VG) as an active material, in combination with micropyramid arrays and lumpy holders, the stress concentration effects are generated in nano-, micro-, and macroscales. Therefore, the lumpily pyramidal VG film-based pressure sensor (LPV sensor) achieves an ultrahigh sensitivity (131.36 kPa-1) and a wide response range (0.1-100 kPa). Finite element analysis demonstrates that the stress concentration effects are enhanced by the micropyramid arrays and lumpy structures in micro- and macroscales, respectively. Finally, the LPV pressure sensors are tested in practical applications, including wearable health monitoring and force feedback of robotic tactile sensing.
Collapse
Affiliation(s)
- Yifei Ma
- State Key Laboratory of Quantum Optics and Quantum Optics Devices, Institute of Laser Spectroscopy, Collaborative Innovation Center of Extreme Optics, Shanxi University, Taiyuan, Shanxi 030006, People's Republic of China
| | - Ke Zhao
- State Key Laboratory of Quantum Optics and Quantum Optics Devices, Institute of Laser Spectroscopy, Collaborative Innovation Center of Extreme Optics, Shanxi University, Taiyuan, Shanxi 030006, People's Republic of China
| | - Jiemin Han
- State Key Laboratory of Quantum Optics and Quantum Optics Devices, Institute of Laser Spectroscopy, Collaborative Innovation Center of Extreme Optics, Shanxi University, Taiyuan, Shanxi 030006, People's Republic of China
| | - Bingkang Han
- State Key Laboratory of Quantum Optics and Quantum Optics Devices, Institute of Laser Spectroscopy, Collaborative Innovation Center of Extreme Optics, Shanxi University, Taiyuan, Shanxi 030006, People's Republic of China
| | - Mei Wang
- State Key Laboratory of Quantum Optics and Quantum Optics Devices, Institute of Laser Spectroscopy, Collaborative Innovation Center of Extreme Optics, Shanxi University, Taiyuan, Shanxi 030006, People's Republic of China
| | - Zhaomin Tong
- State Key Laboratory of Quantum Optics and Quantum Optics Devices, Institute of Laser Spectroscopy, Collaborative Innovation Center of Extreme Optics, Shanxi University, Taiyuan, Shanxi 030006, People's Republic of China
| | - Jonghwan Suhr
- Department of Polymer Science and Engineering, School of Mechanical Engineering, Sungkyunkwan University, Suwon, Gyeonggi 16419, Republic of Korea
| | - Liantuan Xiao
- State Key Laboratory of Quantum Optics and Quantum Optics Devices, Institute of Laser Spectroscopy, Collaborative Innovation Center of Extreme Optics, Shanxi University, Taiyuan, Shanxi 030006, People's Republic of China
| | - Suotang Jia
- State Key Laboratory of Quantum Optics and Quantum Optics Devices, Institute of Laser Spectroscopy, Collaborative Innovation Center of Extreme Optics, Shanxi University, Taiyuan, Shanxi 030006, People's Republic of China
| | - Xuyuan Chen
- State Key Laboratory of Quantum Optics and Quantum Optics Devices, Institute of Laser Spectroscopy, Collaborative Innovation Center of Extreme Optics, Shanxi University, Taiyuan, Shanxi 030006, People's Republic of China
- Faculty of Technology, Natural Sciences and Maritime Sciences, Department of Microsystems, University of South-Eastern Norway, N-3184 Borre, Norway
| |
Collapse
|
16
|
Shi L, Li Z, Chen M, Zhu T, Wu L. Ultrasensitive and Ultraprecise Pressure Sensors for Soft Systems. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2023; 35:e2210091. [PMID: 36625165 DOI: 10.1002/adma.202210091] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/01/2022] [Revised: 01/05/2023] [Indexed: 06/17/2023]
Abstract
Highly sensitive soft pressure sensors have attracted tremendous attention in recent years due to their great promise in robotics, healthcare, smart wearables, etc. Although high sensitivities can be realized by existing sensing mechanisms, they usually cause large random errors owing to inhomogeneous sensing layers, thus considerably reducing the sensing precision for practical applications. Herein, a pure-polymer and field emission bilayer structure (PFEBS)-based transduction mechanism is presented to successfully design an ultrasensitive and ultraprecise soft pressure sensor for the first time. This unique structure enables numerous tunneling electrons generated by field emission to be transmitted through the homogeneous sensing layer, which undergoes uniform deformation under subtle pressures, simultaneously achieving a sensing precision with variation <1.62% and a sensitivity of 372.2 kPa-1 . This study offers a new design strategy to develop next-generation high-performance flexible pressure sensors for soft systems.
Collapse
Affiliation(s)
- Lan Shi
- Department of Materials Science and State Key Laboratory of Molecular Engineering of Polymers, Fudan University, Shanghai, 200433, P. R. China
| | - Zhuo Li
- Department of Materials Science and State Key Laboratory of Molecular Engineering of Polymers, Fudan University, Shanghai, 200433, P. R. China
| | - Min Chen
- Department of Materials Science and State Key Laboratory of Molecular Engineering of Polymers, Fudan University, Shanghai, 200433, P. R. China
| | - Tianyu Zhu
- Department of Materials Science and State Key Laboratory of Molecular Engineering of Polymers, Fudan University, Shanghai, 200433, P. R. China
| | - Limin Wu
- Department of Materials Science and State Key Laboratory of Molecular Engineering of Polymers, Fudan University, Shanghai, 200433, P. R. China
| |
Collapse
|
17
|
Selbmann F, Paul SD, Satwara M, Roscher F, Wiemer M, Kuhn H, Joseph Y. Paradigm Changing Integration Technology for the Production of Flexible Electronics by Transferring Structures, Dies and Electrical Components from Rigid to Flexible Substrates. MICROMACHINES 2023; 14:415. [PMID: 36838115 PMCID: PMC9960505 DOI: 10.3390/mi14020415] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 12/24/2022] [Revised: 01/29/2023] [Accepted: 01/31/2023] [Indexed: 06/18/2023]
Abstract
Emerging trends like the Internet of Things require an increasing number of different sensors, actuators and electronic devices. To enable new applications, such as wearables and electronic skins, flexible sensor technologies are required. However, established technologies for the fabrication of sensors and actuators, as well as the related packaging, are based on rigid substrates, i.e., silicon wafer substrates and printed circuit boards (PCB). Moreover, most of the flexible substrates investigated until now are not compatible with the aforementioned fabrication technologies on wafers due to their lack of chemical inertness and handling issues. In this presented paper, we demonstrate a conceptually new approach to transfer structures, dies, and electronic components to a flexible substrate by lift-off. The structures to be transferred, including the related electrical contacts and packaging, are fabricated on a rigid carrier substrate, coated with the flexible substrate and finally lifted off from the carrier. The benefits of this approach are the combined advantages of using established semiconductor and microsystem fabrication technologies as well as packaging technologies, such as high precision and miniaturization, as well as a variety of available materials and processes together with those of flexible substrates, such as a geometry adaptivity, lightweight structures and low costs.
Collapse
Affiliation(s)
- Franz Selbmann
- Fraunhofer Institute for Electronic Nano Systems ENAS, 09126 Chemnitz, Germany
- TU Bergakademie Freiberg, Institute for Electronic and Sensor Materials, 09599 Freiberg, Germany
| | - Soumya Deep Paul
- Fraunhofer Institute for Electronic Nano Systems ENAS, 09126 Chemnitz, Germany
| | - Maulik Satwara
- Fraunhofer Institute for Electronic Nano Systems ENAS, 09126 Chemnitz, Germany
| | - Frank Roscher
- Fraunhofer Institute for Electronic Nano Systems ENAS, 09126 Chemnitz, Germany
| | - Maik Wiemer
- Fraunhofer Institute for Electronic Nano Systems ENAS, 09126 Chemnitz, Germany
| | - Harald Kuhn
- Fraunhofer Institute for Electronic Nano Systems ENAS, 09126 Chemnitz, Germany
- TU Chemnitz, Center for Microtechnologies, 09126 Chemnitz, Germany
| | - Yvonne Joseph
- TU Bergakademie Freiberg, Institute for Electronic and Sensor Materials, 09599 Freiberg, Germany
| |
Collapse
|
18
|
Mechanical and Sensing Performance under Hydrothermal Ageing of Wearable Sensors Made of Polydimethylsiloxane with Graphitic Nanofillers. Polym Degrad Stab 2023. [DOI: 10.1016/j.polymdegradstab.2023.110278] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/05/2023]
|
19
|
Pathiraja G, Bonner CDJ, Obare SO. Recent Advances of Enzyme-Free Electrochemical Sensors for Flexible Electronics in the Detection of Organophosphorus Compounds: A Review. SENSORS (BASEL, SWITZERLAND) 2023; 23:s23031226. [PMID: 36772265 PMCID: PMC9918968 DOI: 10.3390/s23031226] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/15/2022] [Revised: 01/15/2023] [Accepted: 01/18/2023] [Indexed: 06/10/2023]
Abstract
Emerging materials integrated into high performance flexible electronics to detect environmental contaminants have received extensive attention worldwide. The accurate detection of widespread organophosphorus (OP) compounds in the environment is crucial due to their high toxicity even at low concentrations, which leads to acute health concerns. Therefore, developing rapid, highly sensitive, reliable, and facile analytical sensing techniques is necessary to monitor environmental, ecological, and food safety risks. Although enzyme-based sensors have better sensitivity, their practical usage is hindered due to their low specificity and stability. Therefore, among various detection methods of OP compounds, this review article focuses on the progress made in the development of enzyme-free electrochemical sensors as an effective nostrum. Further, the novel materials used in these sensors and their properties, synthesis methodologies, sensing strategies, analytical methods, detection limits, and stability are discussed. Finally, this article summarizes potential avenues for future prospective electrochemical sensors and the current challenges of enhancing the performance, stability, and shelf life.
Collapse
Affiliation(s)
- Gayani Pathiraja
- Department of Nanoscience, Joint School of Nanoscience and Nanoengineering, University of North Carolina at Greensboro, Greensboro, NC 27401, USA
| | - Chartanay D. J. Bonner
- Department of Nanoscience, Joint School of Nanoscience and Nanoengineering, University of North Carolina at Greensboro, Greensboro, NC 27401, USA
| | - Sherine O. Obare
- Department of Nanoscience, Joint School of Nanoscience and Nanoengineering, University of North Carolina at Greensboro, Greensboro, NC 27401, USA
- Department of Nanoengineering, Joint School of Nanoscience and Nanoengineering, North Carolina A&T State University, Greensboro, NC 27401, USA
| |
Collapse
|
20
|
Dutta P, Gupta G. Environmental gas sensors based on electroactive hybrid organic-inorganic nanocomposites using nanostructured materials. Phys Chem Chem Phys 2022; 24:28680-28699. [PMID: 36416590 DOI: 10.1039/d2cp04247a] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/24/2022]
Abstract
Advanced gas sensing devices are urgently demanded in the modern scientific world to control air pollution and protect human life. For this purpose, semiconducting electroactive materials can revolutionize the idea of conventional gas sensors. Chemi-resistive gas sensors based on electroactive hybrid organic-inorganic nanocomposites are incredibly promising gas sensing materials because they possess the advantages of excellent selectivity, high sensitivity, low response time, repeatability, high stability, cost-effectiveness, and simple fabrication techniques, and they can be operated at room temperature. This review emphasizes the recent developments of organic-inorganic hybrid nanocomposite-based electroactive gas sensors, including metal oxide nanocomposites, which are potential gas sensing materials due to the presence of numerous charge carriers. The review also focuses on nanostructured materials of different dimensions, such as semiconducting quantum dots, carbon dots, nanotubes, nanowires, and nanosheets, used for developing these gas sensing compounds and their significance and challenges. Some possible fabrication techniques for developing efficient gas sensors with different morphologies are discussed, with their probable sensing mechanism behind the detection of toxic vapours. Subsequently, a summary and possible outcome of this study, along with the various achievements and prospects in this field, are also discussed.
Collapse
Affiliation(s)
- Priyanka Dutta
- CSIR-National Physical Laboratory, Dr K. S. Krishnan Road, New Delhi 110012, India.
| | - Govind Gupta
- CSIR-National Physical Laboratory, Dr K. S. Krishnan Road, New Delhi 110012, India. .,Academy of Scientific and Innovative Research, CSIR-HRDC Campus, Ghaziabad, Uttar Pradesh-201002, India
| |
Collapse
|
21
|
Smocot S, Zhang Z, Zhang L, Guo S, Cao C. Printed flexible mechanical sensors. NANOSCALE 2022; 14:17134-17156. [PMID: 36385388 DOI: 10.1039/d2nr04015h] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/16/2023]
Abstract
Flexible mechanical sensors (e.g., strain, pressure, and force) fabricated primarily by printing technologies have emerged and evolved promptly in the past several years. 2D and 3D printing approaches enabled rapid prototyping of various flexible mechanical sensors that have demonstrated their unique applications in fields including robotics, human-machine interfaces, and biomedicine. Research efforts have primarily been focused on experimenting with different materials, device configurations, and sensing mechanisms to achieve better sensing performance. While great progress has been made, this field is still in its infancy where most research is exploratory; and even the performance standards and long-term objective/vision of these sensors are not clear. In this review, the state-of-the-art of three types of printed flexible mechanical sensors will be discussed and analyzed in terms of their fabrication methods, types of sensing materials and mechanisms, and challenges for future development.
Collapse
Affiliation(s)
- Samuel Smocot
- Department of Mechanical Engineering, McGill University, Montreal, Quebec, Canada.
| | - Zixin Zhang
- Department of Mechanical Engineering, McGill University, Montreal, Quebec, Canada.
| | - Lingzhi Zhang
- Department of Mechanical Engineering, McGill University, Montreal, Quebec, Canada.
| | - Shu Guo
- School of Vehicle and Energy, Yanshan University, Qinhuangdao, China.
| | - Changhong Cao
- Department of Mechanical Engineering, McGill University, Montreal, Quebec, Canada.
| |
Collapse
|
22
|
Yasin D, Sami N, Afzal B, Husain S, Naaz H, Ahmad N, Zaki A, Rizvi MA, Fatma T. Prospects in the use of gold nanoparticles as cancer theranostics and targeted drug delivery agents. APPLIED NANOSCIENCE 2022. [DOI: 10.1007/s13204-022-02701-5] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/15/2022]
|
23
|
MXene-based flexible pressure sensor with piezoresistive properties significantly enhanced by atomic layer infiltration. NANO MATERIALS SCIENCE 2022. [DOI: 10.1016/j.nanoms.2022.10.003] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/07/2022]
|
24
|
A magnetostrictive self-powered biosensor based on Au-BaTiO3-FeGa & PDMS. J IND ENG CHEM 2022. [DOI: 10.1016/j.jiec.2022.10.012] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022]
|
25
|
Optimization of Piezoresistive Strain Sensors Based on Gold Nanoparticle Deposits on PDMS Substrates for Highly Sensitive Human Pulse Sensing. NANOMATERIALS 2022; 12:nano12132312. [PMID: 35808151 PMCID: PMC9268126 DOI: 10.3390/nano12132312] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/12/2022] [Revised: 06/26/2022] [Accepted: 06/29/2022] [Indexed: 11/24/2022]
Abstract
In this study, highly-sensitive piezoresistive strain sensors based on gold nanoparticle thin films deposited on a stretchable PDMS substrate by centrifugation were developed to measure arterial pulse waveform. By controlling carbon chain length of surfactants, pH value and particle density of the colloidal solutions, the gauge factors of nanoparticle thin film sensors can be optimized up to 677 in tensile mode and 338 in compressive mode, and the pressure sensitivity up to 350. Low pH and thin nanoparticle films produce positive influences to superior gauge factors. It has been demonstrated that nanoparticle thin film sensors on PDMS substrates were successfully applied to sense arterial pulses in different body positions, including wrist, elbow crease, neck, and chest.
Collapse
|
26
|
Song K, Cho NK, Park K, Kim CS. Investigating Mechanical Behaviours of PDMS Films under Cyclic Loading. Polymers (Basel) 2022; 14:polym14122373. [PMID: 35745949 PMCID: PMC9230393 DOI: 10.3390/polym14122373] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/24/2022] [Revised: 06/07/2022] [Accepted: 06/09/2022] [Indexed: 02/01/2023] Open
Abstract
Polydimethylsiloxane (PDMS) is widely utilised as a substrate for wearable (stretchable) electronics where high fatigue resistance is required. Cyclic loadings cause the rearrangement of the basic molecular structure of polymer chains, which leads to changes in the mechanical properties of the PDMS structure. Accordingly, it is necessary to investigate reliable mechanical properties of PDMS considering both monotonic and cyclic loading conditions. This study aims to present the mechanical properties of PDMS films against both monotonic and cyclic loading. The effects of certain parameters, such as film thickness and magnitude of tensile strain, on mechanical properties are also investigated. The test results show that PDMS films have a constant monotonic elastic modulus regardless of the influence of thickness and tensile loading, whereas a cyclic elastic modulus changes depending on experimental parameters. Several material parameters, such as neo-Hookean, Mooney–Rivlin, the third-order Ogden model, and Yeoh, are defined to mimic the stress–strain behaviours of the PDMS films. Among them, it is confirmed that the third-order Ogden model is best suited for simulating the PDMS films over the entire tensile test range. This research makes contributions not only to understanding the mechanical behaviour of the PDMS films between the monotonic and the cycle loadings, but also through providing trustworthy hyperelastic material coefficients that enable the evaluation of the structural integrity of the PDMS films using the finite element technique.
Collapse
Affiliation(s)
- Kyu Song
- Department of Manufacturing Systems and Design Engineering, Seoul National University of Science and Technology (SeoulTech), Seoul 01811, Korea;
| | - Nak-Kyun Cho
- Department of Manufacturing Systems and Design Engineering, Seoul National University of Science and Technology (SeoulTech), Seoul 01811, Korea;
- Correspondence: authors:
| | - Keun Park
- Department of Mechanical Systems Design Engineering, Seoul National University of Science and Technology (SeoulTech), Seoul 01811, Korea;
| | - Chung-Soo Kim
- Advanced Forming Process R&D Group and 3D Printing Manufacturing Process Centre, Korea Institute of Industrial Technology (KITECH), Ulsan 31056, Korea;
| |
Collapse
|
27
|
Yang Y, Yi T, Liu Y, Zhao H, Liang C. Design of a Highly Sensitive Reduced Graphene Oxide/Graphene Oxide@Cellulose Acetate/Thermoplastic Polyurethane Flexible Sensor. SENSORS 2022; 22:s22093281. [PMID: 35590970 PMCID: PMC9099808 DOI: 10.3390/s22093281] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/02/2022] [Revised: 04/17/2022] [Accepted: 04/22/2022] [Indexed: 12/10/2022]
Abstract
As a substitute for rigid sensors, flexible sensing materials have been greatly developed in recent years, but maintaining the stability of conductive fillers and the stability of micro-strain sensing is still a major challenge. In this experiment, we innovatively prepared a polyurethane-based cellulose acetate composite membrane (CA/TPU) with abundant mesopores through electrospinning. Then, we reduced graphene oxide (rGO)-as a conductive filler-and graphene oxide (GO)-as an insulating layer-which were successively and firmly anchored on the CA/TPU nanofiber membrane with the ultrasonic impregnation method, to obtain an rGO/GO@CA/TPU sensor with a GF of 3.006 under a very small strain of 0.5%. The flexibility of the film and its high sensitivity under extremely low strains enables the detection of subtle human motions (such as finger bending, joint motion, etc.), making it suitable for potential application in wearable electronic devices.
Collapse
Affiliation(s)
- Yujie Yang
- College of Light Industry and Food Engineering, Guangxi University, Nanning 530004, China; (Y.Y.); (T.Y.); (H.Z.); (C.L.)
| | - Tan Yi
- College of Light Industry and Food Engineering, Guangxi University, Nanning 530004, China; (Y.Y.); (T.Y.); (H.Z.); (C.L.)
| | - Yang Liu
- College of Light Industry and Food Engineering, Guangxi University, Nanning 530004, China; (Y.Y.); (T.Y.); (H.Z.); (C.L.)
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, Guangxi University, Nanning 530004, China
- Guangxi Bossco Environmental Protection Technology Co., Ltd., Nanning 530000, China
- Correspondence: ; Tel.: +86-155-7832-3385; Fax: +86-0771-3237309
| | - Hui Zhao
- College of Light Industry and Food Engineering, Guangxi University, Nanning 530004, China; (Y.Y.); (T.Y.); (H.Z.); (C.L.)
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, Guangxi University, Nanning 530004, China
| | - Chen Liang
- College of Light Industry and Food Engineering, Guangxi University, Nanning 530004, China; (Y.Y.); (T.Y.); (H.Z.); (C.L.)
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, Guangxi University, Nanning 530004, China
| |
Collapse
|
28
|
A Self-Powered UHF Passive Tag for Biomedical Temperature Monitoring. ELECTRONICS 2022. [DOI: 10.3390/electronics11071108] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
Self-powered RF passive sensors have potential application in temperature measurements of patients with health problems. Herein, this work presents the design and implementation of a self-powered UHF passive tag prototype for biomedical temperature monitoring. The proposed battery-free sensor is composed of three basic building blocks: a high-frequency section, a micro-power management stage, and a temperature sensor. This passive temperature sensor uses an 860 MHz to 960 MHz RF carrier and a 1 W Effective Isotropic Radiated Power (EIRP) to harvest energy for its operation, showing a read range of 9.5 m with a 13.75 µW power consumption, and an overall power consumption efficiency of 10.92% was achieved. The proposed device can measure temperature variations between 0 °C and 60 °C with a sensitivity of 823.29 Hz/°C and a standard error of 13.67 Hz/°C over linear regression. Circuit functionality was validated by means of post-layout simulations, characterization, and measurements of the manufactured prototype. The chip prototype was fabricated using a 0.18 µm CMOS standard technology with a silicon area consumption of 1065 µm × 560 µm. The overall size of the self-powered passive tag is 8 cm × 2 cm, including both chip and antenna. The self-powered tag prototype could be employed for human body temperature monitoring.
Collapse
|
29
|
Hao F, Maimaitiyiming X. Fast 3D Printing with Chitosan/Polyvinyl alcohol/Graphene Oxide Multifunctional Hydrogel Ink that has UltraStretch Properity. ChemistrySelect 2022. [DOI: 10.1002/slct.202200201] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
Affiliation(s)
- Feiyue Hao
- State Key Laboratory of Chemistry and Utilization of Carbon Based Energy Resources College of Chemistry Xinjiang University, Urumqi 830046 PR China Huaguang Street, Shuimogou District Urumqi Xinjiang Uygur Autonomous Region, China
| | - Xieraili Maimaitiyiming
- State Key Laboratory of Chemistry and Utilization of Carbon Based Energy Resources College of Chemistry Xinjiang University, Urumqi 830046 PR China Huaguang Street, Shuimogou District Urumqi Xinjiang Uygur Autonomous Region, China
| |
Collapse
|
30
|
Halder O, Layani-Tzadka ME, Ziv Sharabani S, Markovich G, Sitt A. Metal nanowires grown in situ on polymeric fibres for electronic textiles. NANOSCALE ADVANCES 2022; 4:1368-1374. [PMID: 36133692 PMCID: PMC9419569 DOI: 10.1039/d1na00872b] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/17/2021] [Accepted: 01/18/2022] [Indexed: 06/12/2023]
Abstract
A key aspect of the use of conventional fabrics as smart textiles and wearable electronics is to incorporate a means of electrical conductivity into single polymer fibres. We present the transformation of thin polymer fibres and fabrics into conductive materials by in situ growth of a thin, optically transparent gold-silver nanowire (NW) mesh with a relatively low metal loading directly on the surface of polymer fibres. Demonstrating the method on poly(lactic-co-glycolic) acid and nylon microfibres, we show that the NW network morphology depends on the diameter of the polymer fibres, where at small diameters (1-2 μm), the NWs form a randomly oriented network, but for diameters above several micrometers, the NWs wrap around the fibres transversally. This phenomenon is associated with the stiffness of the surfactant templates used for the NW formation. The NW-decorated fibres exhibit a significant increase in conductivity. Moreover, single fibres can be stretched up to ∼15% before losing the electrical conductivity, while non-woven meshes could be stretched by about 25% before losing the conductivity. We believe that the approach demonstrated here can be extended to other polymeric fibres and that these flexible and transparent metal-coated polymer fibres could be useful for various smart electronic textile applications.
Collapse
Affiliation(s)
- Oindrila Halder
- School of Chemistry, Raymond and Beverly Sackler Faculty of Exact Sciences, The Center for Nanoscience and Nanotechnology, Tel Aviv University 6997801 Israel
| | | | - Shiran Ziv Sharabani
- School of Chemistry, Raymond and Beverly Sackler Faculty of Exact Sciences, The Center for Nanoscience and Nanotechnology, Tel Aviv University 6997801 Israel
| | - Gil Markovich
- School of Chemistry, Raymond and Beverly Sackler Faculty of Exact Sciences, The Center for Nanoscience and Nanotechnology, Tel Aviv University 6997801 Israel
| | - Amit Sitt
- School of Chemistry, Raymond and Beverly Sackler Faculty of Exact Sciences, The Center for Nanoscience and Nanotechnology, Tel Aviv University 6997801 Israel
| |
Collapse
|
31
|
Li WD, Ke K, Jia J, Pu JH, Zhao X, Bao RY, Liu ZY, Bai L, Zhang K, Yang MB, Yang W. Recent Advances in Multiresponsive Flexible Sensors towards E-skin: A Delicate Design for Versatile Sensing. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2022; 18:e2103734. [PMID: 34825473 DOI: 10.1002/smll.202103734] [Citation(s) in RCA: 38] [Impact Index Per Article: 19.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/26/2021] [Revised: 09/16/2021] [Indexed: 05/07/2023]
Abstract
Multiresponsive flexile sensors with strain, temperature, humidity, and other sensing abilities serving as real electronic skin (e-skin) have manifested great application potential in flexible electronics, artificial intelligence (AI), and Internet of Things (IoT). Although numerous flexible sensors with sole sensing function have already been reported since the concept of e-skin, that mimics the sensing features of human skin, was proposed about a decade ago, the ones with more sensing capacities as new emergences are urgently demanded. However, highly integrated and highly sensitive flexible sensors with multiresponsive functions are becoming a big thrust for the detection of human body motions, physiological signals (e.g., skin temperature, blood pressure, electrocardiograms (ECG), electromyograms (EMG), sweat, etc.) and environmental stimuli (e.g., light, magnetic field, volatile organic compounds (VOCs)), which are vital to real-time and all-round human health monitoring and management. Herein, this review summarizes the design, manufacturing, and application of multiresponsive flexible sensors and presents the future challenges of fabricating these sensors for the next-generation e-skin and wearable electronics.
Collapse
Affiliation(s)
- Wu-Di Li
- College of Polymer Science and Engineering, State Key Laboratory of Polymer Materials Engineering, Sichuan University, Chengdu, Sichuan, 610065, China
| | - Kai Ke
- College of Polymer Science and Engineering, State Key Laboratory of Polymer Materials Engineering, Sichuan University, Chengdu, Sichuan, 610065, China
| | - Jin Jia
- College of Polymer Science and Engineering, State Key Laboratory of Polymer Materials Engineering, Sichuan University, Chengdu, Sichuan, 610065, China
| | - Jun-Hong Pu
- College of Polymer Science and Engineering, State Key Laboratory of Polymer Materials Engineering, Sichuan University, Chengdu, Sichuan, 610065, China
| | - Xing Zhao
- College of Polymer Science and Engineering, State Key Laboratory of Polymer Materials Engineering, Sichuan University, Chengdu, Sichuan, 610065, China
| | - Rui-Ying Bao
- College of Polymer Science and Engineering, State Key Laboratory of Polymer Materials Engineering, Sichuan University, Chengdu, Sichuan, 610065, China
| | - Zheng-Ying Liu
- College of Polymer Science and Engineering, State Key Laboratory of Polymer Materials Engineering, Sichuan University, Chengdu, Sichuan, 610065, China
| | - Lu Bai
- College of Polymer Science and Engineering, State Key Laboratory of Polymer Materials Engineering, Sichuan University, Chengdu, Sichuan, 610065, China
| | - Kai Zhang
- College of Polymer Science and Engineering, State Key Laboratory of Polymer Materials Engineering, Sichuan University, Chengdu, Sichuan, 610065, China
| | - Ming-Bo Yang
- College of Polymer Science and Engineering, State Key Laboratory of Polymer Materials Engineering, Sichuan University, Chengdu, Sichuan, 610065, China
| | - Wei Yang
- College of Polymer Science and Engineering, State Key Laboratory of Polymer Materials Engineering, Sichuan University, Chengdu, Sichuan, 610065, China
| |
Collapse
|
32
|
Wang Y, Wang G, Li X, Yin J, Zhu J. Research Progress of Flexible Piezoresistive Sensors Prepared by Solution-Based Processing. ACTA CHIMICA SINICA 2022. [DOI: 10.6023/a21080414] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/24/2022]
|
33
|
Abstract
Upconversion nanoparticles are a class of luminescent materials that convert longer-wavelength near-infrared photons into visible and ultraviolet emissions. They can respond to various external stimuli, which underpins many opportunities for developing the next generation of sensing technologies. In this perspective, the unique stimuli-responsive properties of upconverting nanoparticles are introduced, and their recent implementations in sensing are summarized. Promising material development strategies for enhancing the key sensing merits, including intrinsic sensitivity, biocompatibility and modality, are identified and discussed. The outlooks on future technological developments, novel sensing concepts, and applications of nanoscale upconversion sensors are provided.
Collapse
Affiliation(s)
- Gungun Lin
- Institute for Biomedical Materials & Devices, Faculty of Science, The University of Technology Sydney, Ultimo, New South Wales 2007, Australia
| | - Dayong Jin
- Institute for Biomedical Materials & Devices, Faculty of Science, The University of Technology Sydney, Ultimo, New South Wales 2007, Australia
- UTS-SUStech Joint Research Centre for Biomedical Materials & Devices, Department of Biomedical Engineering, Southern University of Science and Technology, 1088 Xueyuan Avenue, Nanshan, Shenzhen, Guangdong 518055, China
| |
Collapse
|
34
|
Mai D, Mo J, Shan S, Lin Y, Zhang A. Self-Healing, Self-Adhesive Strain Sensors Made with Carbon Nanotubes/Polysiloxanes Based on Unsaturated Carboxyl-Amine Ionic Interactions. ACS APPLIED MATERIALS & INTERFACES 2021; 13:49266-49278. [PMID: 34634200 DOI: 10.1021/acsami.1c12438] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
Strain sensors with high sensitivity, long-term durability, and stretchability are required for flexible and wearable electronic devices. This paper reports a bilayer strain sensor consisting of carboxyl-functionalized carbon nanotubes (CNTs) and ionically crosslinked polysiloxane substrates based on unsaturated acid-amine interactions. Vacuum filtration was adopted to prepare the CNT films (2.74-4.70 μm in thickness) onto the polysiloxane substrates to prepare stretchable conductive strain sensors. The strain sensor exhibited self-healing ability, self-adhesiveness, high sensitivity, linearity, low hysteresis, and long-term durability with a gauge factor of 33.99 at 55% strain. The sensitivity and linearity could be adjusted by the thickness of the CNT layer. A crack-related mechanism was proposed in which increasing the thickness of the CNT layer led to simultaneously enhanced sensitivity and linearity. Finally, we investigated the detection of human activities (bending/unbending of fingers or knees) and subtle motions (coughing and swallowing). The fabricated strain sensor succeeded in meeting various needs with satisfactory sensing performance.
Collapse
Affiliation(s)
- Dongdong Mai
- School of Materials Science and Engineering, South China University of Technology, 381 Wushan Road, Guangzhou 510641, Guangdong, China
- School of Materials Science and Engineering, Guangdong University of Petrochemical Technology, Maoming 525000, China
| | - Jiaheng Mo
- School of Materials Science and Engineering, South China University of Technology, 381 Wushan Road, Guangzhou 510641, Guangdong, China
| | - Shijie Shan
- School of Materials Science and Engineering, South China University of Technology, 381 Wushan Road, Guangzhou 510641, Guangdong, China
| | - Yaling Lin
- College of Material and Energy, South China Agricultural University, 483 Wushan Road, Guangzhou 510642, Guangdong, China
| | - Anqiang Zhang
- School of Materials Science and Engineering, South China University of Technology, 381 Wushan Road, Guangzhou 510641, Guangdong, China
| |
Collapse
|
35
|
Review of Materials and Fabrication Methods for Flexible Nano and Micro-Scale Physical and Chemical Property Sensors. APPLIED SCIENCES-BASEL 2021. [DOI: 10.3390/app11188563] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/15/2022]
Abstract
The use of flexible sensors has tripled over the last decade due to the increased demand in various fields including health monitoring, food packaging, electronic skins and soft robotics. Flexible sensors have the ability to be bent and stretched during use and can still maintain their electrical and mechanical properties. This gives them an advantage over rigid sensors that lose their sensitivity when subject to bending. Advancements in 3D printing have enabled the development of tailored flexible sensors. Various additive manufacturing methods are being used to develop these sensors including inkjet printing, aerosol jet printing, fused deposition modelling, direct ink writing, selective laser melting and others. Hydrogels have gained much attention in the literature due to their self-healing and shape transforming. Self-healing enables the sensor to recover from damages such as cracks and cuts incurred during use, and this enables the sensor to have a longer operating life and stability. Various polymers are used as substrates on which the sensing material is placed. Polymers including polydimethylsiloxane, Poly(N-isopropylacrylamide) and polyvinyl acetate are extensively used in flexible sensors. The most widely used nanomaterials in flexible sensors are carbon and silver due to their excellent electrical properties. This review gives an overview of various types of flexible sensors (including temperature, pressure and chemical sensors), paying particular attention to the application areas and the corresponding characteristics/properties of interest required for such. Current advances/trends in the field including 3D printing, novel nanomaterials and responsive polymers, and self-healable sensors and wearables will also be discussed in more detail.
Collapse
|
36
|
Weng SR, Zhen WL, Yan X, Yue ZL, Hu HJ, Xu F, Zhang RR, Pi L, Zhu WK, Zhang CJ. Wide-spectrum photodetector constructed on a centimeter-scale flexible SnSe 2film using a new one-step strategy. JOURNAL OF PHYSICS. CONDENSED MATTER : AN INSTITUTE OF PHYSICS JOURNAL 2021; 33:395001. [PMID: 34252886 DOI: 10.1088/1361-648x/ac1368] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/26/2021] [Accepted: 07/12/2021] [Indexed: 06/13/2023]
Abstract
Two-dimensional (2D) materials attached with flexible substrates enable possibilities to apply their superior properties to the rapidly increasing demand for foldable displays and wearable biosensors in the internet-of-things technology. However, previous two-step strategy to construct the flexible devices, namely first obtaining 2D materials elsewhere and then transferring them onto flexible substrates, can cause huge problems, including irreversibly undermining the device performance and limiting the material size. Here we propose a new one-step strategy (other than the liquid phase processing and low temperature synthesis methods), namely directly depositing appropriate 2D materials onto flexible substrates, which involves no transferring and can maintain the crystal quality and properties to the greatest extent. More importantly, this strategy in principle has no limit in the film size, hence removing a main obstacle for the practical use of flexible films, such as complex logic operations and large-area optoelectronic applications. Using this strategy, a centimeter-scale SnSe2film is directly grown on polydimethylsiloxane, which is characterized as a uniform, out-of-plane oriented and semiconducting film that is robust to deformations. Based on the film, a flexible photodetector is fabricated and distinct photoresponse to a broad spectrum of light (405-830 nm) is observed, with remarkable technical parameters.
Collapse
Affiliation(s)
- S R Weng
- High Magnetic Field Laboratory, Chinese Academy of Sciences, Hefei 230031, People's Republic of China
- University of Science and Technology of China, Hefei 230026, People's Republic of China
| | - W L Zhen
- High Magnetic Field Laboratory, Chinese Academy of Sciences, Hefei 230031, People's Republic of China
| | - X Yan
- High Magnetic Field Laboratory, Chinese Academy of Sciences, Hefei 230031, People's Republic of China
| | - Z L Yue
- High Magnetic Field Laboratory, Chinese Academy of Sciences, Hefei 230031, People's Republic of China
| | - H J Hu
- High Magnetic Field Laboratory, Chinese Academy of Sciences, Hefei 230031, People's Republic of China
| | - F Xu
- High Magnetic Field Laboratory, Chinese Academy of Sciences, Hefei 230031, People's Republic of China
| | - R R Zhang
- High Magnetic Field Laboratory, Chinese Academy of Sciences, Hefei 230031, People's Republic of China
| | - L Pi
- High Magnetic Field Laboratory, Chinese Academy of Sciences, Hefei 230031, People's Republic of China
- University of Science and Technology of China, Hefei 230026, People's Republic of China
| | - W K Zhu
- High Magnetic Field Laboratory, Chinese Academy of Sciences, Hefei 230031, People's Republic of China
| | - C J Zhang
- High Magnetic Field Laboratory, Chinese Academy of Sciences, Hefei 230031, People's Republic of China
- Institutes of Physical Science and Information Technology, Anhui University, Hefei 230601, People's Republic of China
| |
Collapse
|
37
|
Guo J, Xiao T, Zhao X, Wang J, Zhang Y, Tu B, Yan Y. Counterion Gradients around Charged Metal Nanoparticles Enabling Basic Electronics without Semiconductors. J Phys Chem Lett 2021; 12:6102-6110. [PMID: 34170708 DOI: 10.1021/acs.jpclett.1c01620] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
In modern electronics, metals have not occupied the same role as semiconductors because their electrical properties are largely independent of the potential that is applied to them. However, this limitation of bulk metals can be overcome at the nanoscale, where metal nanoparticles functionalized with charged organic ligands can have highly tunable electrical characteristics enabling the fabrication of basic electronic components. Here, we show the recent progress on the design and construction of the basic electronic components (e.g., diodes and transistors) based on charged metal nanoparticles and the coupled transport of ionic and electronic charges within nanoparticle layers (Poisson and Nernst-Planck diffusion equations, PNP model) and how to assemble these electronic components and various metal nanoparticle sensors to achieve basic computations and "chemoelectronics". Meanwhile, we envision the future research directions and a possible breakthrough in metal nanoparticle electronics.
Collapse
Affiliation(s)
- Jiahui Guo
- CAS Key Laboratory of Nanosystem and Hierarchical Fabrication, CAS Center for Excellence in Nanoscience, National Center for Nanoscience and Technology, Beijing 100190, China
- University of Chinese Academy of Sciences, Beijing, 100049, China
| | - Tao Xiao
- CAS Key Laboratory of Nanosystem and Hierarchical Fabrication, CAS Center for Excellence in Nanoscience, National Center for Nanoscience and Technology, Beijing 100190, China
- University of Chinese Academy of Sciences, Beijing, 100049, China
| | - Xing Zhao
- CAS Key Laboratory of Nanosystem and Hierarchical Fabrication, CAS Center for Excellence in Nanoscience, National Center for Nanoscience and Technology, Beijing 100190, China
| | - Jingyu Wang
- CAS Key Laboratory of Nanosystem and Hierarchical Fabrication, CAS Center for Excellence in Nanoscience, National Center for Nanoscience and Technology, Beijing 100190, China
- University of Chinese Academy of Sciences, Beijing, 100049, China
| | - Yuchun Zhang
- CAS Key Laboratory of Nanosystem and Hierarchical Fabrication, CAS Center for Excellence in Nanoscience, National Center for Nanoscience and Technology, Beijing 100190, China
| | - Bin Tu
- CAS Key Laboratory of Nanosystem and Hierarchical Fabrication, CAS Center for Excellence in Nanoscience, National Center for Nanoscience and Technology, Beijing 100190, China
| | - Yong Yan
- CAS Key Laboratory of Nanosystem and Hierarchical Fabrication, CAS Center for Excellence in Nanoscience, National Center for Nanoscience and Technology, Beijing 100190, China
- University of Chinese Academy of Sciences, Beijing, 100049, China
- Department of Chemistry, School of Chemistry and Biological Engineering, University of Science and Technology Beijing, Beijing 100083, China
| |
Collapse
|
38
|
Takaloo S, Moghimi Zand M. Wearable electrochemical flexible biosensors: With the focus on affinity biosensors. SENSING AND BIO-SENSING RESEARCH 2021. [DOI: 10.1016/j.sbsr.2021.100403] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 01/30/2023] Open
|
39
|
Clemens F, Melnykowycz M, Bar F, Goldenstein D, Georgopoulou A. 2D Printing of Piezoresistive Auxetic Silicone Sensor Structures. IEEE Robot Autom Lett 2021. [DOI: 10.1109/lra.2021.3062000] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
|
40
|
Zou Q, He K, Ou-Yang J, Zhang Y, Shen Y, Jin C. Highly Sensitive and Durable Sea-Urchin-Shaped Silver Nanoparticles Strain Sensors for Human-Activity Monitoring. ACS APPLIED MATERIALS & INTERFACES 2021; 13:14479-14488. [PMID: 33739083 DOI: 10.1021/acsami.0c22756] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
High-performance strain sensors, composed of various artificial sensing materials on/in stretchable substrates, show great promise for applications in flexible electronic devices. Here, we demonstrated a highly sensitive and durable strain sensor consisting of a ribbon of close-packed sea-urchin-shaped silver nanoparticles (SUSNs) sandwiched between two layers of poly(dimethylsiloxane) (PDMS). Each of SUSNs possesses high-density and spherically distributed sharp spines over the body, which promotes electron transduction and further improves signal detection. This SUSN-based sensor possesses a desirable integration of high sensitivity (a gauge factor of 60) and large stretchability (up to 25%) at tensile sensing, broadening its application in wearable devices. Moreover, it also shows fast response (48 ms), good reproducibility, and long-term stability (>2500 cycles at 20% strain). It can also be used to detect compressing (sensitivity up to 31.5) and folding-type bending deformations. The sensing mechanism, the resistance of the sensors varying as the deformation load, results from the inter-spine contacts change and the microcracks evolution caused by variation in the gap between SUSNs. The sensor's sensitivity at different degrees of strain was also achieved by controlling the width of the close-packed SUSNs ribbon. For practical demonstration, the SUSN-based sensors could be used as wearable devices for monitoring human activities ranging from subtle deformations to substantial movements.
Collapse
Affiliation(s)
- Qiushun Zou
- State Key Laboratory of Optoelectronic Materials and Technologies, Guangzhou Key Laboratory of Flexible Electronic Materials and Wearable Devices, School of Materials Science and Engineering, Sun Yat-sen University, Guangzhou 510275, China
| | - Kai He
- State Key Laboratory of Optoelectronic Materials and Technologies, Guangzhou Key Laboratory of Flexible Electronic Materials and Wearable Devices, School of Materials Science and Engineering, Sun Yat-sen University, Guangzhou 510275, China
| | - Jian Ou-Yang
- State Key Laboratory of Optoelectronic Materials and Technologies, Guangzhou Key Laboratory of Flexible Electronic Materials and Wearable Devices, School of Materials Science and Engineering, Sun Yat-sen University, Guangzhou 510275, China
| | - Yueli Zhang
- State Key Laboratory of Optoelectronic Materials and Technologies, Guangzhou Key Laboratory of Flexible Electronic Materials and Wearable Devices, School of Materials Science and Engineering, Sun Yat-sen University, Guangzhou 510275, China
| | - Yang Shen
- State Key Laboratory of Optoelectronic Materials and Technologies, Guangzhou Key Laboratory of Flexible Electronic Materials and Wearable Devices, School of Materials Science and Engineering, Sun Yat-sen University, Guangzhou 510275, China
| | - Chongjun Jin
- State Key Laboratory of Optoelectronic Materials and Technologies, Guangzhou Key Laboratory of Flexible Electronic Materials and Wearable Devices, School of Materials Science and Engineering, Sun Yat-sen University, Guangzhou 510275, China
| |
Collapse
|
41
|
Jia Z, Li Z, Ma S, Zhang W, Chen Y, Luo Y, Jia D, Zhong B, Razal JM, Wang X, Kong L. Constructing conductive titanium carbide nanosheet (MXene) network on polyurethane/polyacrylonitrile fibre framework for flexible strain sensor. J Colloid Interface Sci 2021; 584:1-10. [DOI: 10.1016/j.jcis.2020.09.035] [Citation(s) in RCA: 44] [Impact Index Per Article: 14.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/13/2020] [Revised: 09/10/2020] [Accepted: 09/11/2020] [Indexed: 11/29/2022]
|
42
|
Huang CB, Yao Y, Montes-García V, Stoeckel MA, Von Holst M, Ciesielski A, Samorì P. Highly Sensitive Strain Sensors Based on Molecules-Gold Nanoparticles Networks for High-Resolution Human Pulse Analysis. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2021; 17:e2007593. [PMID: 33464719 DOI: 10.1002/smll.202007593] [Citation(s) in RCA: 19] [Impact Index Per Article: 6.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/02/2020] [Revised: 12/10/2020] [Indexed: 06/12/2023]
Abstract
High-performance flexible strain sensors are key components for the next generation of wearable health monitoring devices. Here, the authors have fabricated a novel strain sensor based on gold nanoparticles (AuNPs) interconnected by flexible and responsive molecular linkers. The combination of conductive AuNPs (25 nm in diameter) with tetra(ethylene glycol) dithiol (SH-TEG-SH) linkers yields a covalent 3D network which can be directly deposited onto prepatterned flexible supports exposing interdigitated Au electrodes. The electrically insulating nature of the linkers effectively defines the tunneling modulated charge transfer through the AuNPs network. When compressive/tensile strain is applied, the molecular linkers adopt a compressed/stretched conformation thus decreasing/increasing the interparticle distance, ultimately yielding an exponential increase/decrease of the tunneling current when voltage is applied. The strain sensor displays state-of-the-art performances including a highly sensitive response to both tensile and compressive strain, as quantified by a high gauge factor (GF≈126) combined with other superior sensing properties like high flexibility, short response time (16.1 ms), and good robustness (>2000 cycles). Finally, the applicability of the device for health monitoring is demonstrated: high-resolution artery pulse waves are acquired by placing the strain sensor onto the skin allowing the extraction of important physical parameters for human-health assessment.
Collapse
Affiliation(s)
- Chang-Bo Huang
- University of Strasbourg, CNRS, ISIS UMR 7006, 8 Alleé Gaspard Monge, Strasbourg, F-67000, France
| | - Yifan Yao
- University of Strasbourg, CNRS, ISIS UMR 7006, 8 Alleé Gaspard Monge, Strasbourg, F-67000, France
| | - Verónica Montes-García
- University of Strasbourg, CNRS, ISIS UMR 7006, 8 Alleé Gaspard Monge, Strasbourg, F-67000, France
| | - Marc-Antoine Stoeckel
- University of Strasbourg, CNRS, ISIS UMR 7006, 8 Alleé Gaspard Monge, Strasbourg, F-67000, France
| | - Miriam Von Holst
- University of Strasbourg, CNRS, ISIS UMR 7006, 8 Alleé Gaspard Monge, Strasbourg, F-67000, France
| | - Artur Ciesielski
- University of Strasbourg, CNRS, ISIS UMR 7006, 8 Alleé Gaspard Monge, Strasbourg, F-67000, France
| | - Paolo Samorì
- University of Strasbourg, CNRS, ISIS UMR 7006, 8 Alleé Gaspard Monge, Strasbourg, F-67000, France
| |
Collapse
|
43
|
Esser FJ, Auth P, Speck T. Artificial Venus Flytraps: A Research Review and Outlook on Their Importance for Novel Bioinspired Materials Systems. Front Robot AI 2021; 7:75. [PMID: 33501242 PMCID: PMC7806029 DOI: 10.3389/frobt.2020.00075] [Citation(s) in RCA: 15] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/27/2020] [Accepted: 05/05/2020] [Indexed: 01/19/2023] Open
Abstract
Bioinspired and biomimetic soft machines rely on functions and working principles that have been abstracted from biology but that have evolved over 3.5 billion years. So far, few examples from the huge pool of natural models have been examined and transferred to technical applications. Like living organisms, subsequent generations of soft machines will autonomously respond, sense, and adapt to the environment. Plants as concept generators remain relatively unexplored in biomimetic approaches to robotics and related technologies, despite being able to grow, and continuously adapt in response to environmental stimuli. In this research review, we highlight recent developments in plant-inspired soft machine systems based on movement principles. We focus on inspirations taken from fast active movements in the carnivorous Venus flytrap (Dionaea muscipula) and compare current developments in artificial Venus flytraps with their biological role model. The advantages and disadvantages of current systems are also analyzed and discussed, and a new state-of-the-art autonomous system is derived. Incorporation of the basic structural and functional principles of the Venus flytrap into novel autonomous applications in the field of robotics not only will inspire further plant-inspired biomimetic developments but might also advance contemporary plant-inspired robots, leading to fully autonomous systems utilizing bioinspired working concepts.
Collapse
Affiliation(s)
- Falk J Esser
- Plant Biomechanics Group and Botanic Garden, University of Freiburg, Freiburg, Germany.,Cluster of Excellence livMatS @FIT, Freiburg Center for Interactive Materials and Bioinspired Technologies, University of Freiburg, Freiburg, Germany.,Freiburg Center for Interactive Materials and Bioinspired Technologies (FIT), Freiburg, Germany
| | - Philipp Auth
- Plant Biomechanics Group and Botanic Garden, University of Freiburg, Freiburg, Germany
| | - Thomas Speck
- Plant Biomechanics Group and Botanic Garden, University of Freiburg, Freiburg, Germany.,Cluster of Excellence livMatS @FIT, Freiburg Center for Interactive Materials and Bioinspired Technologies, University of Freiburg, Freiburg, Germany.,Freiburg Center for Interactive Materials and Bioinspired Technologies (FIT), Freiburg, Germany.,FMF, Freiburg Materials Research Center, University of Freiburg, Freiburg, Germany
| |
Collapse
|
44
|
Chowdhury SR, Mukherjee P, Bhattacharya SK. A Highly Sensitive Nonenzymatic Glucose Sensor Based on Carbon Electrode Amplified with Pd
x
Cu
y
Catalyst. ELECTROANAL 2021. [DOI: 10.1002/elan.202060268] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/25/2022]
Affiliation(s)
- Sreya Roy Chowdhury
- Physical Chemistry Section Department of Chemistry Jadavpur University Kolkata 700032 India
| | | | | |
Collapse
|
45
|
Yanagisawa R, Shigaki S, Yasui K, Owaki D, Sugimoto Y, Ishiguro A, Shimizu M. Wearable Vibration Sensor for Measuring the Wing Flapping of Insects. SENSORS (BASEL, SWITZERLAND) 2021; 21:E593. [PMID: 33467684 PMCID: PMC7829746 DOI: 10.3390/s21020593] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/04/2020] [Revised: 01/05/2021] [Accepted: 01/12/2021] [Indexed: 11/16/2022]
Abstract
In this study, we fabricated a novel wearable vibration sensor for insects and measured their wing flapping. An analysis of insect wing deformation in relation to changes in the environment plays an important role in understanding the underlying mechanism enabling insects to dynamically interact with their surrounding environment. It is common to use a high-speed camera to measure the wing flapping; however, it is difficult to analyze the feedback mechanism caused by the environmental changes caused by the flapping because this method applies an indirect measurement. Therefore, we propose the fabrication of a novel film sensor that is capable of measuring the changes in the wingbeat frequency of an insect. This novel sensor is composed of flat silver particles admixed with a silicone polymer, which changes the value of the resistor when a bending deformation occurs. As a result of attaching this sensor to the wings of a moth and a dragonfly and measuring the flapping of the wings, we were able to measure the frequency of the flapping with high accuracy. In addition, as a result of simultaneously measuring the relationship between the behavior of a moth during its search for an odor source and its wing flapping, it became clear that the frequency of the flapping changed depending on the frequency of the odor reception. From this result, a wearable film sensor for an insect that can measure the displacement of the body during a particular behavior was fabricated.
Collapse
Affiliation(s)
- Ryota Yanagisawa
- Department of Systems Science, Osaka University, 1-2 Machikaneyama-cho, Toyonaka, Osaka 560-0043, Japan;
| | - Shunsuke Shigaki
- Department of System Innovation, Osaka University, 1-2 Machikaneyama-cho, Toyonaka, Osaka 560-0043, Japan;
| | - Kotaro Yasui
- Frontier Research Institute for Interdisciplinary Sciences, Tohoku University, 6-3 Aramaki aza Aoba, Aoba-ku, Sendai 980-8578, Japan;
- Research Institute of Electrical Communication, Tohoku University, 2-1-1 Katahira, Aoba-ku, Sendai 980-8577, Japan;
| | - Dai Owaki
- Department of Robotics, Tohoku University, 6-6-01 Aoba, Aramaki, Aoba-ku, Sendai 980-8579, Japan;
| | - Yasuhiro Sugimoto
- Department of Mechanical Engineering, Osaka University, 2-1 Yamadaoka, Suita, Osaka 565-0871, Japan;
| | - Akio Ishiguro
- Research Institute of Electrical Communication, Tohoku University, 2-1-1 Katahira, Aoba-ku, Sendai 980-8577, Japan;
| | - Masahiro Shimizu
- Department of System Innovation, Osaka University, 1-2 Machikaneyama-cho, Toyonaka, Osaka 560-0043, Japan;
| |
Collapse
|
46
|
Nam D, Cha JM, Park K. Next-Generation Wearable Biosensors Developed with Flexible Bio-Chips. MICROMACHINES 2021; 12:64. [PMID: 33430524 PMCID: PMC7827596 DOI: 10.3390/mi12010064] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/11/2020] [Revised: 12/30/2020] [Accepted: 01/05/2021] [Indexed: 12/31/2022]
Abstract
The development of biosensors that measure various biosignals from our body is an indispensable research field for health monitoring. In recent years, as the demand to monitor the health conditions of individuals in real time have increased, wearable-type biosensors have received more attention as an alternative to laboratory equipment. These biosensors have been embedded into smart watches, clothes, and accessories to collect various biosignals in real time. Although wearable biosensors attached to the human body can conveniently collect biosignals, there are reliability issues due to noise generated in data collection. In order for wearable biosensors to be more widely used, the reliability of collected data should be improved. Research on flexible bio-chips in the field of material science and engineering might help develop new types of biosensors that resolve the issues of conventional wearable biosensors. Flexible bio-chips with higher precision can be used to collect various human data in academic research and in our daily lives. In this review, we present various types of conventional biosensors that have been used and discuss associated issues such as noise and inaccuracy. We then introduce recent studies on flexible bio-chips as a solution to these issues.
Collapse
Affiliation(s)
| | - Jae Min Cha
- Department of Mechatronics Engineering, Incheon National University, Incheon 22012, Korea;
| | - Kiwon Park
- Department of Mechatronics Engineering, Incheon National University, Incheon 22012, Korea;
| |
Collapse
|
47
|
Fully Printed Flexible Chemiresistors with Tunable Selectivity Based on Gold Nanoparticles. CHEMOSENSORS 2020. [DOI: 10.3390/chemosensors8040116] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
This study presents a method for printing flexible chemiresistors comprising thin film transducers based on cross-linked gold nanoparticles (GNPs). First, interdigitated silver paste electrodes are printed onto polyimide (PI) foil via dispenser printing. Second, coatings of GNPs and dithiol/monothiol blends are inkjet-printed onto these electrode structures. 1,9-Nonanedithiol (9DT) is used as cross-linking agent and a variety of monothiols are added to tune the sensors’ chemical selectivity. When dosing these sensors with different analyte vapors (n-octane, toluene, 4-methyl-2-pentanone, 1-butanol, 1-propanol, ethanol, water; concentration range: 25–2000 ppm) they show fully reversible responses with short response and recovery times. The response isotherms follow a first-order Langmuir model, and their initial slopes reveal sensitivities of up to 4.5 × 10−5 ppm−1. Finally, it is demonstrated that arrays of printed sensors can be used to clearly discern analytes of different polarity.
Collapse
|
48
|
Kano S, Mekaru H. Capillary-condensed water in nonporous nanoparticle films evaluated by impedance analysis for nanoparticle devices. NANOTECHNOLOGY 2020; 31:455701. [PMID: 32808599 DOI: 10.1088/1361-6528/aba7e0] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
We study capillary-condensed water in nonporous nanoparticle films and evaluate its effect on impedance analysis for practical nanoparticle devices. Nanoparticle-based electronic/optoelectronic devices have been intensively studied for applications in ambient air. Non-sintered nanoparticle films have porous structures and a vapor phase of water molecules condenses in nanopores between nanoparticles at a lower vapor pressure. This condensed water hinders intrinsic electrical properties of nanoparticle films. To clarify the effects of capillary-condensed water between nanoparticles on impedance, we electrically investigate 50 nm and 10 nm nonporous silica nanoparticle films. In a 50 nm nanoparticle film, an impedance hysteresis is observed at higher than 80% of relative humidity (RH). On the contrary, a larger impedance hysteresis appears in a 10 nm nanoparticle film at higher than 50% RH. We evaluate critical pore sizes in 50 nm and 10 nm nanoparticle films as 5-10 and 1.6 nm, respectively. These values correspond to the critical size of nanopores where adjacent menisci between nanoparticles coincide as following the Kelvin equation. This condensation of gas/vapor molecules will be an important issue for developments of practical devices using nanoparticle films.
Collapse
Affiliation(s)
- Shinya Kano
- Sensing System Research Center, National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba 305-8564, Japan
| | | |
Collapse
|
49
|
Karthäuser S, Peter S, Simon U. Integration of Individual Functionalized Gold Nanoparticles into Nanoelectrode Configurations: Recent Advances. Eur J Inorg Chem 2020. [DOI: 10.1002/ejic.202000629] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2022]
Affiliation(s)
- Silvia Karthäuser
- Peter Grünberg Institut (PGI‐7) and JARA‐FIT Forschungszentrum Jülich GmbH 52425 Jülich Germany
| | - Sophia Peter
- Institute of Inorganic Chemistry and JARA‐FIT RWTH Aachen University 52074 Aachen Germany
| | - Ulrich Simon
- Institute of Inorganic Chemistry and JARA‐FIT RWTH Aachen University 52074 Aachen Germany
| |
Collapse
|
50
|
Du Z, Chen J, Liu C, Jin C, Han M. Controllable Fabrication of Percolative Metal Nanoparticle Arrays Applied for Quantum Conductance-Based Strain Sensors. MATERIALS (BASEL, SWITZERLAND) 2020; 13:ma13214838. [PMID: 33137978 PMCID: PMC7662695 DOI: 10.3390/ma13214838] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 10/13/2020] [Revised: 10/25/2020] [Accepted: 10/28/2020] [Indexed: 06/11/2023]
Abstract
We use gas phase deposition of well-defined nanoparticles (NPs) to fabricate closely-spaced Pd NP arrays on flexible membranes prepatterned with interdigital electrodes (IDEs). The evolution of the morphology and electron conductance of the NP arrays during deposition is analyzed. The growth of two-dimensional percolation clusters of interconnected NPs, which correlate with the percolation pathway for electron conduction in the NP deposits, is demonstrated. The percolative nature of the NP arrays permits us to finely control the percolation geometries and conductance of the NP film by controlling the NP deposition time so as to realize a precise and reproducible fabrication of sensing materials. Electron transport measurements reveal that the electrical conductance of the NP films is dominated by electron tunneling or hopping across the NP percolating networks. Based on the percolative and quantum tunneling nature, the closely-spaced Pd NP films on PET membranes are used as flexible strain sensors. The sensor demonstrates an excellent response ability to distinguish tiny deformations down to 5×10-4 strain and a high sensitivity with a large gauge factor of 200 up to 4% applied strain.
Collapse
Affiliation(s)
| | | | | | | | - Min Han
- Correspondence: ; Tel.: +86-25-83686248
| |
Collapse
|