Using fluorescence lifetime imaging microscopy to monitor theranostic nanoparticle uptake and intracellular doxorubicin release

The supramolecular processing of liposomal doxorubicin hinders its therapeutic efficacy in cells

The successful trajectory of liposome-encapsulated doxorubicin (e.g., Doxil, which has been approved by the U.S. Food and Drug Administration) as an anticancer nanodrug in clinical applications is contradicted by in vitro cell viability data that highlight its reduced efficacy in promoting cell death compared with non-encapsulated doxorubicin. No reports to date have provided a mechanistic explanation for this apparently discordant evidence. Taking advantage of doxorubicin intrinsic fluorescence and time-resolved optical microscopy, we analyze the uptake and intracellular processing of liposome-encapsulated doxorubicin (L-DOX) in several in vitro cellular models. Cell entry of L-DOX was found to lead to a rapid (seconds to minutes), energy- and temperature-independent release of crystallized doxorubicin nanorods into the cell cytoplasm, which then disassemble into a pool of fibril-shaped derivatives capable of crossing the cellular membrane while simultaneously releasing active drug monomers. Thus, a steady state is rapidly established in which the continuous supply of crystal nanorods from incoming liposomes is counteracted by a concentration-guided efflux in the extracellular medium of fibril-shaped derivatives and active drug monomers. These results demonstrate that liposome-mediated delivery is constitutively less efficient than isolated drug in establishing favorable conditions for drug retention in the cell. In addition to explaining previous contradictory evidence, present results impose careful rethinking of the synthetic identity of encapsulated anticancer drugs.

Nanoparticles in cancer theragnostic and drug delivery: A comprehensive review

This comprehensive review provides an in-depth analysis of how nanotechnology has revolutionized cancer theragnostic, which combines diagnostic and therapeutic methods to customize cancer treatment. The study examines the unique attributes, uses, and difficulties linked to different types of nanoparticles, including gold, iron oxide, silica, Quantum dots, Carbon nanotubes, and liposomes, in the context of cancer treatment. In addition, the paper examines the progression of nanotheranostics, emphasizing its uses in precise medication administration, photothermal therapy, and sophisticated diagnostic methods such as MRI, CT, and fluorescence imaging. Moreover, the article highlights the capacity of nanoparticles to improve the effectiveness of drugs, reduce the overall toxicity in the body, and open up new possibilities for treating cancer by releasing drugs in a controlled manner and targeting specific areas. Furthermore, it tackles concerns regarding the compatibility of nanoparticles and their potential harmful effects, emphasizing the significance of continuous study to improve nanotherapeutic methods for use in medical treatments. The review finishes by outlining potential future applications of nanotechnology in predictive oncology and customized medicine.

Bioinspired Adaptive Microdrugs Enhance the Chemotherapy of Malignant Glioma: Beyond Their Nanodrugs

Solid nanoparticle-mediated drug delivery systems are usually confined to nanoscale due to the enhanced permeability and retention effect. However, they remain a great challenge for malignant glioma chemotherapy because of poor drug delivery efficiency and insufficient tumor penetration resulting from the blood-brain barrier/blood-brain tumor barrier (BBB/BBTB). Inspired by biological microparticles (e.g., cells) with excellent adaptive deformation, it is demonstrated that the adaptive microdrugs (even up to 3.0 µm in size) are more efficient than their nanodrugs (less than 200 nm in size) to cross BBB/BBTB and penetrate into tumor tissues, achieving highly efficient chemotherapy of malignant glioma. The distinct delivery of the adaptive microdrugs is mainly attributed to the enhanced interfacial binding and endocytosis via adaptive deformation. As expected, the obtained adaptive microdrugs exhibit enhanced accumulation, deep penetration, and cellular internalization into tumor tissues in comparison with nanodrugs, significantly improving the survival rate of glioblastoma mice. It is believed that the bioinspired adaptive microdrugs enable them to efficiently cross physiological barriers and deeply penetrate tumor tissues for drug delivery, providing an avenue for the treatment of solid tumors.

Spatio-Temporal Electrowetting and Reaction Monitoring in Microfluidic Gas Diffusion Electrode Elucidates Mass Transport Limitations

The use of gas diffusion electrodes (GDEs) enables efficient electrochemical CO2 reduction and may be a viable technology in CO2 utilization after carbon capture. Understanding the spatio-temporal phenomena at the triple-phase boundary formed inside GDEs remains a challenge; yet it is critical to design and optimize industrial electrodes for gas-fed electrolyzers. Thus far, transport and reaction phenomena are not yet fully understood at the microscale, among other factors, due to a lack of experimental analysis methods for porous electrodes under operating conditions. In this work, a realistic microfluidic GDE surrogate is presented. Combined with fluorescence lifetime imaging microscopy (FLIM), the methodology allows monitoring of wetting and local pH, representing the dynamic (in)stability of the triple phase boundary in operando. Upon charging the electrode, immediate wetting leads to an initial flooding of the catalyst layer, followed by spatially oscillating pH changes. The micromodel presented gives an experimental insight into transport phenomena within porous electrodes, which is so far difficult to achieve. The methodology and proof of the spatio-temporal pH and wetting oscillations open new opportunities to further comprehend the relationship between gas diffusion electrode properties and electrical currents originating at a given surface potential.

Fluorescence in depth: integration of spectroscopy and imaging with Raman, IR, and CD for advanced research

Fluorescence spectroscopy serves as a vital technique for studying the interaction between light and fluorescent molecules. It encompasses a range of methods, each presenting unique advantages and applications. This technique finds utility in various chemical studies. This review discusses Fluorescence spectroscopy, its branches such as Time-Resolved Fluorescence Spectroscopy (TRFS) and Fluorescence Lifetime Imaging Microscopy (FLIM), and their integration with other spectroscopic methods, including Raman, Infrared (IR), and Circular Dichroism (CD) spectroscopies. By delving into these methods, we aim to provide a comprehensive understanding of the capabilities and significance of fluorescence spectroscopy in scientific research, highlighting its diverse applications and the enhanced understanding it brings when combined with other spectroscopic methods. This review looks at each technique's unique features and applications. It discusses the prospects of their combined use in advancing scientific understanding and applications across various domains.

The nanoprodrug of polytemozolomide combines with MGMT siRNA to enhance the effect of temozolomide in glioma

Temozolomide (TMZ) is a conventional chemotherapeutic drug for glioma, however, its clinical application and efficacy is severely restricted by its drug resistance properties. O6-methylguanine-DNA methyltransferase (MGMT) is a DNA repair enzyme, which can repair the DNA damage caused by TMZ. A large number of clinical data show that reducing the expression of MGMT can enhance the chemotherapeutic efficacy of TMZ. Therefore, in order to improve the resistance of glioma to TMZ, an angiopep-2 (A2) modified nanoprodrug of polytemozolomide (P(TMZ)n) that combines with MGMT siRNA (siMGMT) targeting MGMT was developed (A2/T/D/siMGMT). It not only increased the amount of TMZ within tumor lesion site, but also reduced MGMT expression in glioma. The in vitro experiments indicated that the A2/T/D/siMGMT effectively enhanced the cellular uptake of TMZ and siMGMT, and resulted in a significant cell apoptosis and cytotoxicity in the glioma cells. The in vivo experiments showed that glioma growth was inhibited and the survival time of animals were prolonged remarkably after A2/T/D/siMGMT was injected via tail vein. The results showed that the therapeutic effect of A2/T/D/siMGMT in the treatment of glioma was significantly improved.

Probing organoid metabolism using fluorescence lifetime imaging microscopy (FLIM): The next frontier of drug discovery and disease understanding

Organoid models have been used to address important questions in developmental and cancer biology, tissue repair, advanced modelling of disease and therapies, among other bioengineering applications. Such 3D microenvironmental models can investigate the regulation of cell metabolism, and provide key insights into the mechanisms at the basis of cell growth, differentiation, communication, interactions with the environment and cell death. Their accessibility and complexity, based on 3D spatial and temporal heterogeneity, make organoids suitable for the application of novel, dynamic imaging microscopy methods, such as fluorescence lifetime imaging microscopy (FLIM) and related decay time-assessing readouts. Several biomarkers and assays have been proposed to study cell metabolism by FLIM in various organoid models. Herein, we present an expert-opinion discussion on the principles of FLIM and PLIM, instrumentation and data collection and analysis protocols, and general and emerging biosensor-based approaches, to highlight the pioneering work being performed in this field.

Evaluation of acute toxicity and in vitro antitumor activity of a novel doxorubicin-loaded folate-coated pH-sensitive liposome

Doxorubicin (DOX) loaded liposomes have been used and studied in the last decades due to the significant decrease in DOX induced cardiac and systemic toxicity relative to administration of free drug. Therefore, new strategies are sought to improve DOX delivery and antitumor activity, while avoiding side effects. Recently, folate-coated pH-sensitive liposomes (SpHL-Fol) have been studied as a tool to enhance cellular uptake and antitumor activity of paclitaxel and DOX in breast cancer cells expressing folate receptor (FR+). However, the elucidation of folate functionalization relevance in DOX-loaded SpHL (SpHL-DOX-Fol) in different cell types (MDA-MB-231, MCF-7, and A549), as well as, the complete safety evaluation, is necessary. To achieve these objectives, SpHL-DOX-Fol was prepared and characterized as previously described. Antitumor activity and acute toxicity were evaluated in vivo through direct comparison of free DOX verses SpHL-DOX, a well-known formulation to reduce DOX cardiotoxicity. The obtained data are crucial to support future translational research. Liposomes showed long-term stability, suitable for biological use. Cellular uptake, cytotoxicity, and percentage of migration inhibition were significantly higher for MDA-MB-231 (FR+) treated with SpHL-DOX-Fol. In addition, SpHL-DOX-Fol demonstrated a decrease in the systemic toxic effects of DOX, mainly in renal and cardiac parameters evaluation, even using a higher dose (20 mg/kg). Collectively these data build the foundation of support demonstrating that SpHL-DOX-Fol could be considered a promising drug delivery strategy for the treatment of FR+ breast tumors.

An Investigation into the Acidity-Induced Insulin Agglomeration: Implications for Drug Delivery and Translation

Insulin undergoes agglomeration with (subtle) changes in its biochemical environment, including acidity, application of heat, ionic imbalance, and exposure to hydrophobic surfaces. The therapeutic impact of such unwarranted insulin agglomeration is unclear and needs further evaluation. A systematic investigation was conducted on recombinant human insulin-with or without labeling with fluorescein isothiocyanate-while preparing insulin suspensions (0.125, 0.25, and 0.5 mg/mL) at pH 3. The suspensions were incubated (37 °C) and analyzed at different time points (t = 2, 4, 24, 48, and 72 h). Transmission electron microscopy and nanoparticle tracking analysis identified colloidally stable (zeta potential 15 ± 5 mV) spherical agglomerates of unlabeled insulin (100-500 nm). Circular dichroism established the preservation of insulin's secondary structure rich in α-helices despite exposure to an acidic environment (pH 3) for 72 h. Furthermore, fluorescence lifetime imaging microscopy illustrated an acidic core inside these spherical agglomerates, while the acidity gradually lessened toward the periphery. Some of these smaller agglomerates fused to form larger chunks with discrete zones of acidity. The data indicated a primary nucleation-driven mechanism of acid-induced insulin agglomeration under physiologically relevant conditions.

Diblock versus block-random copolymer architecture effect on physical properties of Gd3+-based hybrid polyionic complexes

HYPOTHESIS

Random insertion of vinylphosphonic acid (VPA) units into a of PEG-PAA block copolymer improves the chemical stability and properties of hybrid nanoobjects obtained from the complexation of the copolymer with metal ions.

EXPERIMENTS

Block polymers based on poly(acrylic acid) (PAA) and poly(ethylene glycol) (PEG) are modified by random insertion of 0 to 100 % of phosphonic acid functions in PAA block by a RAFT polymerization process. These polymers are then used to form hybrid polyionic complexes (HPICs) by complexation with gadolinium or europium ions. The properties of the obtained assemblies are evaluated by magnetic relaxivity, fluorescence and light scattering measurements.

FINDINGS

The insertion of VPA units within the PAA block increases the chemical stability of the hybrid micelles by maintaining their integrity even at low pH. This insertion also minimizes the exchange of ions between HPICs and the surrounding medium thanks to a strengthening of interactions toward lanthanide ions. When such systems are used as MRI contrast agents or luminescent probe, 50/50 AA/VPA composition appears to be a good compromise to achieve optimal relaxivity or luminescent properties while ensuring a good chemical stability.

Synthesis and characterization of silica nanoparticles from rice ashes coated with chitosan/cancer cell membrane for hepatocellular cancer treatment

Dual pH-sensitive smart nanocarriers based on silica nanoparticles (SNPs) extracted from rice husk ashes (RHAs) to effectively inhibit liver cancer cell proliferation were investigated. The SNPs were coated with chitosan (CH) and loaded with doxorubicin (DOX), then functionalized with cell membrane (CM) for homologous targeting ability. The FTIR spectra showed an absorption wave number at 1083 cm^-1 which confirmed the existence of the SiOSi group, ratifying that the nanocarriers belong to silica species. The Korsmeyer-Peppas kinetic model reported R² values of 0.996 and 0.931 for pH = 5.4 and pH = 7.4, respectively, demonstrating pH-responsive behavior of the nanocarriers. The cytotoxicity test confirmed that the HepG2 cell line treated with different SNP-CH-CM concentrations had no detectable significant cell toxicity, however, SNP-CH-DOX-CM induced greater cell death. In vivo tests revealed that SNP-CH-DOX-CM suppressed liver cancer growth in nude mice, demonstrating high pharmaceutical capability. Histological examination of vital organs showed that the targeted drug delivery system (DDS) had minor in vivo toxicity. In the light of its high treatment efficacy and minimal side effects, the investigated DDS is promising for the therapy of liver cancer.

Nanomaterial-mediated photoporation for intracellular delivery

Translocation of extrinsic molecules into living cells is becoming increasingly crucial in biological studies ranging from cell engineering to biomedical applications. The concerns regarding biosafety and immunogenicity for conventional vectors and physical methods yet challenge effective intracellular delivery. Here, we begin with an overview of approaches for trans-membrane delivery up to now. These methods are featured with a relatively mature application but usually encounter low cell survival. Our review then proposes an advanced application for nanomaterial-sensitized photoporation triggered with a laser. We cover the mechanisms, procedures, and outcomes of photoporation-induced intracellular delivery with a highlight on its versatility to different living cells. We hope the review discussed here encourages researchers to further improvement and applications for photoporation-induced intracellular delivery. STATEMENT OF SIGNIFICANCE.

Design and synthesis of novel palladium cyclometallate-based fluorescent probe: Studies on interaction with cell membrane by confocal and fluorescence lifetime imaging

Coordination complexes offer great potential as cellular imaging probes, which allow to examine specific cell organelle structures in their physiological conditions to better understand the biological system. Understanding the heterogeneous nature of the cell membrane could unveil details of their functionality. Here, we have developed a new anthracene conjugated fluorescent palladium(II) cyclometallate [PdL¹Cl] where L¹H = [2-(2- (anthracen-9-ylmethylene)-1-phenylhydrazineyl)pyridine] (H stands for dissociable proton), which not only specifically stains the cell membrane, but could be utilized to visualise the membrane by the confocal and fluorescence lifetime imaging microscopy (FLIM). This probe is unable to enter inside the cell as it did not pass through the cell membrane via diffusion or various organic and metal transporters. However, the great lipophilicity of fluorescein improves the interaction of the probe with the peptidoglycan layer of the cell membrane. Probable dissociation of chloride ion and formation of positively charged palladium complex resulted in staining the negatively charged cell membrane. The 3D confocal imaging clearly expressed sole membrane staining by the probe. The probe efficiently stains both cancer cells (HeLa and MCF-7 cell lines) and normal cell (HEK 293 T), confirming the universality of the probe in membrane staining.

Tumor microenvironment responsive polypeptide-based supramolecular nanoprodrugs for combination therapy

Tumor microenvironment responsive nanomedicine has drawn considerable attention for combination therapy, but still remains a significant challenge for less side effects and enhanced anti-tumor efficiency. Herein, we develop a pH/ROS dual-responsive supramolecular polypeptide nanoprodrug (PFW-DOX/GOD) by using pillar[5]arene-based host-guest strategy for combined glucose degradation, chemodynamic therapy (CDT), and chemotherapy (CT). The PFW-DOX/GOD consists of a pH-responsive ferrocene/pillar[5]arene-containing polypeptide, a ROS-responsive polyprodrug, and encapsulated glucose oxidase (GOD). Upon into intracellular acidic environment, PFW-DOX/GOD exhibits rapid pH-triggered disassembly behavior. Simultaneously, the released GOD can catalyze intratumoral glucose into massive H₂O₂, which are further converted into highly toxic hydroxyl radicals (•OH) by the catalysis of ferrocene via the Fenton reaction. Thereafter, induced by the ROS-responsive cleavage of thioketal linkage, the conjugated DOX prodrug was released and activated. The combined glucose degradation, chemodynamic therapy (CDT), and chemotherapy (CT) of PFW-DOX/GOD present anti-tumor effect with 96% of tumor inhibitory rate (TIR). Therefore, such tumor microenvironment-responsive supramolecular polypeptide nanoprodrugs represent a potential candidate for combination therapy with minimal side effects. STATEMENT OF SIGNIFICANCE: In this work, a tumor microenvironment-responsive supramolecular polypeptide nanoprodrug (PFW-DOX/GOD) was prepared via pillar[5]arene-based host-guest interactions, and presented low side effects and high tumor accumulation owing to the diameters of about 200 nm and surface PEG segment. After pH-responsive release of GOD in the intracellular acidic environment, the cascade catalytic reactions including GOD-catalyzed degradation of intratumoral glucose and Fenton reaction, effectively happened to generate •OH for chemodynamic therapy (CDT), which subsequently induced the cleavage of thioketal linkage to activate free DOX for chemotherapy (CT). Collectively, this supramolecular polypeptide nanoprodrugs provide a promising strategy for combination therapy with synergetic anti-tumor effect.

Fluorescence lifetime microscopy unveils the supramolecular organization of liposomal Doxorubicin

The supramolecular organization of Doxorubicin (DOX) within the standard Doxoves® liposomal formulation (DOX®) is investigated using visible light and phasor approach to fluorescence lifetime imaging (phasor-FLIM). First, the phasor-FLIM signature of DOX® is resolved into the contribution of three co-existing fluorescent species, each with its characteristic mono-exponential lifetime, namely: crystallized DOX (DOX_c, 0.2 ns), free DOX (DOX_f, 1.0 ns), and DOX bound to the liposomal membrane (DOX_b, 4.5 ns). Then, the exact molar fractions of the three species are determined by combining phasor-FLIM with quantitative absorption/fluorescence spectroscopy on DOX_c, DOX_f, and DOX_b pure standards. The final picture on DOX® comprises most of the drug in the crystallized form (∼98%), with the remaining fractions divided between free (∼1.4%) and membrane-bound drug (∼0.7%). Finally, phasor-FLIM in the presence of a DOX dynamic quencher allows us to suggest that DOX_f is both encapsulated and non-encapsulated, and that DOX_b is present on both liposome-membrane leaflets. We argue that the present experimental protocol can be applied to the investigation of the supramolecular organization of encapsulated luminescent drugs/molecules all the way from the production phase to their state within living matter.

Doxorubicin delivery performance of superparamagnetic carbon multi-core shell nanoparticles: pH dependence, stability and kinetic insight

In the past decade, magnetic nanoparticles (MNPs) have been among the most attractive nanomaterials used in different fields, such as environmental and biomedical applications. The possibility of designing nanoparticles with different functionalities allows for advancing the biomedical applications of these materials. Additionally, the magnetic characteristics of the nanoparticles enable the use of magnetic fields to drive the nanoparticles to the desired sites of delivery. In this context, the development of new MNPs in new approaches for drug delivery systems (DDSs) for cancer treatment has increased. However, the synthesis of nanoparticles with high colloidal stability triggered drug delivery, and good biocompatibility remains a challenge. Herein, multi-core shell MNPs functionalized with Pluronic ® F-127 were prepared and thoroughly characterized as drug carriers for doxorubicin delivery. The functionalized nanoparticles have an average size of 17.71 ± 4.2 nm, high water colloidal stability, and superparamagnetic behavior. In addition, the nanoparticles were able to load 936 μg of DOX per mg of functionalized nanomaterial. Drug release studies at different pH values evidenced a pH-triggered DOX release effect. An increase of 62% in cumulative drug release was observed at pH simulating tumor endosome/lysosome microenvironments (pH 4.5) compared to physiological conditions (pH 7.4). In addition, an innovative dynamic drug delivery study was performed as a function of pH. The results from this test confirmed the pH-induced doxorubicin release capability of carbon multi-core shell MNPs. The validity of traditional kinetic models to fit dynamic pH-dependent drug release was also studied for predictive purposes.

Multiphoton imaging of melanoma 3D models with plasmonic nanocapsules

We report the synthesis of plasmonic nanocapsules and the cellular responses they induce in 3D melanoma models for their perspective use as a photothermal therapeutic agent. The wall of the nanocapsules is composed of polyelectrolytes. The inner part is functionalized with discrete gold nanoislands. The cavity of the nanocapsules contains a fluorescent payload to show their ability for loading a cargo. The nanocapsules exhibit simultaneous two-photon luminescent, fluorescent properties and X-ray contrasting ability. The average fluorescence lifetime (τ) of the nanocapsules measured with FLIM (0.3 ns) is maintained regardless of the intracellular environment, thus proving their abilities for bioimaging of models such as 3D spheroids with a complex architecture. Their multimodal imaging properties are exploited for the first time to study tumorspheres cellular responses exposed to the nanocapsules. Specifically, we studied cellular uptake, toxicity, intracellular fate, generation of reactive oxygen species, and effect on the levels of hypoxia by using multi-photon and confocal laser scanning microscopy. Because of the high X-ray attenuation and atomic number of the gold nanostructure, we imaged the nanocapsule-cell interactions without processing the sample. We confirmed maintenance of the nanocapsules' geometry in the intracellular milieu with no impairment of the cellular ultrastructure. Furthermore, we observed the lack of cellular toxicity and no alteration in oxygen or reactive oxygen species levels. These results in 3D melanoma models contribute to the development of these nanocapsules for their exploitation in future applications as agents for imaging-guided photothermal therapy. STATEMENT OF SIGNIFICANCE: The novelty of the work is that our plasmonic nanocapsules are multimodal. They are responsive to X-ray and to multiphoton and single-photon excitation. This allowed us to study their interaction with 2D and 3D cellular structures and specifically to obtain information on tumor cell parameters such as hypoxia, reactive oxygen species, and toxicity. These nanocapsules will be further validated as imaging-guided photothermal probes.

Designing Functional Bionanoconstructs for Effective In Vivo Targeting

The progress achieved over the last three decades in the field of bioconjugation has enabled the preparation of sophisticated nanomaterial–biomolecule conjugates, referred to herein as bionanoconstructs, for a multitude of applications including biosensing, diagnostics, and therapeutics. However, the development of bionanoconstructs for the active targeting of cells and cellular compartments, both in vitro and in vivo, is challenged by the lack of understanding of the mechanisms governing nanoscale recognition. In this review, we highlight fundamental obstacles in designing a successful bionanoconstruct, considering findings in the field of bionanointeractions. We argue that the biological recognition of bionanoconstructs is modulated not only by their molecular composition but also by the collective architecture presented upon their surface, and we discuss fundamental aspects of this surface architecture that are central to successful recognition, such as the mode of biomolecule conjugation and nanomaterial passivation. We also emphasize the need for thorough characterization of engineered bionanoconstructs and highlight the significance of population heterogeneity, which too presents a significant challenge in the interpretation of in vitro and in vivo results. Consideration of such issues together will better define the arena in which bioconjugation, in the future, will deliver functional and clinically relevant bionanoconstructs.

Application of Rapid Fluorescence Lifetime Imaging Microscopy (RapidFLIM) to Examine Dynamics of Nanoparticle Uptake in Live Cells

A key challenge in nanomedicine stems from the continued need for a systematic understanding of the delivery of nanoparticles in live cells. Complexities in delivery are often influenced by the biophysical characteristics of nanoparticles, where even subtle changes to nanoparticle designs can alter cellular uptake, transport and activity. Close examination of these processes, especially with imaging, offers important insights that can aid in future nanoparticle design or translation. Rapid fluorescence lifetime imaging microscopy (RapidFLIM) is a potentially valuable technology for examining intracellular mechanisms of nanoparticle delivery by directly correlating visual data with changes in the biological environment. To date, applications for this technology in nanoparticle research have not been explored. A PicoQuant RapidFLIM system was used together with commercial silica nanoparticles to follow particle uptake in glioblastoma cells. Importantly, RapidFLIM imaging showed significantly improved image acquisition speeds over traditional FLIM, which enabled the tracking of nanoparticle uptake into subcellular compartments. We determined mean lifetime changes and used this to delineate significant changes in nanoparticle lifetimes (>0.39 ns), which showed clustering of these tracks proximal to both extracellular and nuclear membrane boundaries. These findings demonstrate the ability of RapidFLIM to track, localize and quantify changes in single nanoparticle fluorescence lifetimes and highlight RapidFLIM as a valuable tool for multiparameter visualization and analysis of nanoparticle molecular dynamics in live cells.

Double hydrophilic copolymers - synthetic approaches, architectural variety, and current application fields

Solubility and functionality of polymeric materials are essential properties determining their role in any application. In that regard, double hydrophilic copolymers (DHC) are typically constructed from two chemically dissimilar but water-soluble building blocks. During the past decades, these materials have been intensely developed and utilised as, e.g., matrices for the design of multifunctional hybrid materials, in drug carriers and gene delivery, as nanoreactors, or as sensors. This is predominantly due to almost unlimited possibilities to precisely tune DHC composition and topology, their solution behavior, e.g., stimuli-response, and potential interactions with small molecules, ions and (nanoparticle) surfaces. In this contribution we want to highlight that this class of polymers has experienced tremendous progress regarding synthesis, architectural variety, and the possibility to combine response to different stimuli within one material. Especially the implementation of DHCs as versatile building blocks in hybrid materials expanded the range of water-based applications during the last two decades, which now includes also photocatalysis, sensing, and 3D inkjet printing of hydrogels, definitely going beyond already well-established utilisation in biomedicine or as templates.

Mapping the Time Dependent DNA Fragmentation caused by doxorubicin Loaded on PEGylated Carbogenic Nanodots using Fluorescence Lifetime Imaging and Super-resolution microscopy

Doxorubicin is an anthracycline drug most commonly used in cancer therapy. It intercalates with the nuclear DNA and induces toxicity by causing DNA breaks and histone evictions. However, the kinetics...

Spatio-temporal analysis of nanoparticles in live tumor spheroids impacted by cell origin and density

Nanoparticles hold great preclinical promise in cancer therapy but continue to suffer attrition through clinical trials. Advanced, three dimensional (3D) cellular models such as tumor spheroids can recapitulate elements of the tumor environment and are considered the superior model to evaluate nanoparticle designs. However, there is an important need to better understand nanoparticle penetration kinetics and determine how different cell characteristics may influence this nanoparticle uptake. A key challenge with current approaches for measuring nanoparticle accumulation in spheroids is that they are often static, losing spatial and temporal information which may be necessary for effective nanoparticle evaluation in 3D cell models. To overcome this challenge, we developed an analysis platform, termed the Determination of Nanoparticle Uptake in Tumor Spheroids (DONUTS), which retains spatial and temporal information during quantification, enabling evaluation of nanoparticle uptake in 3D tumor spheroids. Outperforming linear profiling methods, DONUTS was able to measure silica nanoparticle uptake to 10 μm accuracy in both isotropic and irregularly shaped cancer cell spheroids. This was then extended to determine penetration kinetics, first by a forward-in-time, center-in-space model, and then by mathematical modelling, which enabled the direct evaluation of nanoparticle penetration kinetics in different spheroid models. Nanoparticle uptake was shown to inversely relate to particle size and varied depending on the cell type, cell stiffness and density of the spheroid model. The automated analysis method we have developed can be applied to live spheroids in situ, for the advanced evaluation of nanoparticles as delivery agents in cancer therapy.

Spatially resolved quantification of drug metabolism and efficacy in 3D paper-based tumor mimics

Paper-based cultures are an emerging platform for preparing three-dimensional (3D) tissue- and tumor-like structures. The ability to stack individual sheets of cell-containing paper affords a modular means of assembling structures with defined cellular compositions and microenvironments. These layered stacks are easily separated at the end of an experiment, providing spatially resolved populations of live cells for further analysis. Here we describe a workflow in which cell viability, drug penetration, and drug metabolism are quantified in a spatially resolved manner. Specifically, we mapped the distribution of the drug irinotecan and its bioactive metabolite SN38 in a colorectal cancer cell-containing stacked structure with liquid chromatography-mass spectrometry (LC-MS). This paper provides the first example of a 3D culture platform that quantifies viability and drug metabolism in a spatially resolved manner. Our data show that cells at the bottom of the stack are more drug-resistant than layers in contact with the culture medium, similar to cells in the nutrient-poor center of a proliferating tumor being more drug-resistant than the rapidly dividing cells at its periphery. The powerful combination of quantitative viability and drug metabolism measurements will enable future studies to determine the exact mechanism(s) of drug resistance in different regions of a tumor.

Dithiolane quartets: thiol-mediated uptake enables cytosolic delivery in deep tissue

The cytosolic delivery of various substrates in 3D multicellular spheroids by thiol-mediated uptake is reported. This is important because most orthodox systems, including polycationic cell-penetrating peptides, fail to deliver efficiently into deep tissue. The grand principles of supramolecular chemistry, that is the pH dependence of dynamic covalent disulfide exchange with known thiols on the transferrin receptor, are proposed to account for transcytosis into deep tissue, while the known but elusive exchange cascades along the same or other partners assure cytosolic delivery in kinetic competition. For quantitative detection in the cytosol, the 2D chloroalkane penetration assay (CAPA) is translated to 3D deep tissue. The targeted delivery of quantum dots, otherwise already troublesome in 2D culture, and the controlled release of mechanophores are realized to exemplify the power of thiol-mediated uptake into spheroids. As transporters, dithiolane quartets on streptavidin templates are introduced as modular motifs. Built from two amino acids only, the varied stereochemistry and peptide sequence are shown to cover maximal functional space with minimal structural change, i.e., constitutional isomers. Reviving a classic in peptide chemistry, this templated assembly of β quartets promises to expand streptavidin biotechnology in new directions, while the discovery of general cytosolic delivery in deep tissue as an intrinsic advantage further enhances the significance and usefulness of thiol-mediated uptake.

Magnetic Nanoparticles Used in Oncology

Recently, magnetic nanoparticles (MNPs) have more and more often been used in experimental studies on cancer treatments, which have become one of the biggest challenges in medical research. The main goal of this research is to treat and to cure advanced or metastatic cancer with minimal side effects through nanotechnology. Drug delivery approaches take into account the fact that MNPs can be bonded to chemotherapeutical drugs, nucleic acids, synthetized antibodies or radionuclide substances. MNPs can be guided, and different treatment therapies can be applied, under the influence of an external magnetic field. This paper reviews the main MNPs’ synthesis methods, functionalization with different materials and highlight the applications in cancer therapy. In this review, we describe cancer cell monitorization based on different types of magnetic nanoparticles, chemotherapy, immunotherapy, magnetic hyperthermia, gene therapy and ferroptosis. Examples of applied treatments on murine models or humans are analyzed, and glioblastoma cancer therapy is detailed in the review. MNPs have an important contribution to diagnostics, investigation, and therapy in the so called theranostics domain. The main conclusion of this paper is that MNPs are very useful in different cancer therapies, with limited side effects, and they can increase the life expectancy of patients with cancer drug resistance.

Multifunctional theranostic nanoparticles for biomedical cancer treatments - A comprehensive review

Modern-day search for the novel agents (their preparation and consequent implementation) to effectively treat the cancer is mainly fuelled by the historical failure of the conventional treatment modalities. Apart from that, the complexities such as higher rate of cell mutations, variable tumor microenvironment, patient-specific disparities, and the evolving nature of cancers have made this search much stronger in the latest times. As a result of this, in about two decades, the theranostic nanoparticles (TNPs) - i.e., nanoparticles that integrate therapeutic and diagnostic characteristics - have been developed. The examples for TNPs include mesoporous silica nanoparticles, luminescence nanoparticles, carbon-based nanomaterials, metal nanoparticles, and magnetic nanoparticles. These TNPs have emerged as single and powerful cancer-treating multifunctional nanoplatforms, as they widely provide the necessary functionalities to overcome the previous/conventional limitations including lack of the site-specific delivery of anti-cancer drugs, and real-time continuous monitoring of the target cancer sites while performing therapeutic actions. This has been mainly possible due to the association of the as-developed TNPs with the already-available unique diagnostic (e.g., luminescence, photoacoustic, and magnetic resonance imaging) and therapeutic (e.g., photothermal, photodynamic, hyperthermia therapy) modalities in the biomedical field. In this review, we have discussed in detail about the recent developments on the aforementioned important TNPs without/with targeting ability (i.e., attaching them with ligands or tumor-specific antibodies) and also the strategies that are implemented to increase their tumor accumulation and to enhance their theranostic efficacies for effective biomedical cancer treatments.

Multifunctional nanoparticles as theranostic agents for therapy and imaging of breast cancer

Over the last decade, there has been significant developments in nanotechnology, in particular for combined imaging and therapeutic applications (theranostics). The core or shell of nanoemulsions (NEs) can be loaded with various therapeutic agents, including drugs with low solubility for effective treatment, or various imaging agents for specific imaging modalities (e.g., MRI, fluorescence). In this work, perfluorohexane (PFH) NEs were synthesized for theranostic applications and were coupled to silica coated gold nanoparticles (scAuNPs) to increase the generation of PFH bubbles upon laser induced vaporization (i.e., optical droplet vaporization). The localized heat generated from the absorption properties of these nanoparticles (used to provide photoacoustic signals) can also be used to treat cancer without significantly damaging nearby healthy tissues. The theranostic potential of these PFH-NEs for contrast imaging of tumors and as a drug-delivery vehicle for therapeutic purposes were demonstrated for both in vitro and in vivo systems using a combination of photoacoustic, ultrasound and fluorescence imaging modalities. The ability of PFH-NEs to couple with scAuNPs, attach to the membranes of cancer cells and internalize within cancer cells, are encouraging for targeted chemotherapeutic applications for directly inducing cancer cell death via vaporization in clinical settings.

Luminescence lifetime imaging of three-dimensional biological objects

A major focus of current biological studies is to fill the knowledge gaps between cell, tissue and organism scales. To this end, a wide array of contemporary optical analytical tools enable multiparameter quantitative imaging of live and fixed cells, three-dimensional (3D) systems, tissues, organs and organisms in the context of their complex spatiotemporal biological and molecular features. In particular, the modalities of luminescence lifetime imaging, comprising fluorescence lifetime imaging (FLI) and phosphorescence lifetime imaging microscopy (PLIM), in synergy with Förster resonance energy transfer (FRET) assays, provide a wealth of information. On the application side, the luminescence lifetime of endogenous molecules inside cells and tissues, overexpressed fluorescent protein fusion biosensor constructs or probes delivered externally provide molecular insights at multiple scales into protein-protein interaction networks, cellular metabolism, dynamics of molecular oxygen and hypoxia, physiologically important ions, and other physical and physiological parameters. Luminescence lifetime imaging offers a unique window into the physiological and structural environment of cells and tissues, enabling a new level of functional and molecular analysis in addition to providing 3D spatially resolved and longitudinal measurements that can range from microscopic to macroscopic scale. We provide an overview of luminescence lifetime imaging and summarize key biological applications from cells and tissues to organisms.

Hybrid System for Local Drug Delivery and Magnetic Hyperthermia Based on SPIONs Loaded with Doxorubicin and Epirubicin

Cancer is one of the most common causes of death worldwide, thus new solutions in anticancer therapies are highly sought after. In this work, superparamagnetic iron oxide nanoparticles (SPIONs) conjugated with anticancer drugs are synthesized and investigated as potential magnetic drug nanocarriers for local drug delivery and mild magnetic hyperthermia. We have obtained a hybrid system loaded with holmium and anticancer drugs and thoroughly studied it with respect to the size, morphology, surface modifications and magnetic properties, and interactions with the model of biological membranes, cytotoxicity. We present that nanoparticles having a round shape and size 15 nm are successfully stabilized to avoid their agglomeration and modified with doxorubicin or epirubicin within a controlled way. The number of drugs loaded into the SPIONs was confirmed with thermogravimetry. The hybrid based on SPIONs was investigated in touch with model biological membranes within the Langmuir-Blodgett technique, and results show that modified SPION interacts effectively with them. Results obtained with magnetic hyperthermia and biological studies confirm the promising properties of the hybrid towards future cancer cell treatment.

Light-Interacting iron-based nanomaterials for localized cancer detection and treatment

To improve the prognosis of cancer patients, methods of local cancer detection and treatment could be implemented. For that, iron-based nanomaterials (IBN) are particularly well-suited due to their biocompatibility and the various ways in which they can specifically target a tumor, i.e. through passive, active or magnetic targeting. Furthermore, when it is needed, IBN can be associated with well-known fluorescent compounds, such as dyes, clinically approved ICG, fluorescent proteins, or quantum dots. They may also be excited and detected using well-established optical methods, relying on scattering or fluorescent mechanisms, depending on whether IBN are associated with a fluorescent compound or not. Systems combining IBN with optical methods are diverse, thus enabling tumor detection in various ways. In addition, these systems provide a wealth of information, which is inaccessible with more standard diagnostic tools, such as single tumor cell detection, in particular by combining IBN with near-field scanning optical microscopy, dark-field microscopy, confocal microscopy or super-resolution microscopy, or the highlighting of certain dynamic phenomena such as the diffusion of a fluorescent compound in an organism, e.g. using fluorescence lifetime imaging, fluorescence resonance energy transfer, fluorescence anisotropy, or fluorescence tomography. Furthermore, they can in some cases be complemented by a therapeutic approach to destroy tumors, e.g. when the fluorescent compound is a drug, or when a technique such as photo-thermal or photodynamic therapy is employed. This review brings forward the idea that iron-based nanomaterials may be associated with various optical techniques to form a commercially available toolbox, which can serve to locally detect or treat cancer with a better efficacy than more standard medical approaches. STATEMENT OF SIGNIFICANCE: New tools should be developed to improve cancer treatment outcome. For that, two closely-related aspects deserve to be considered, i.e. early tumor detection and local tumor treatment. Here, I present various types of iron-based nanomaterials, which can achieve this double objective when they interact with a beam of light under specific and accurately chosen conditions. Indeed, these materials are biocompatible and can be used/combined with most standard microscopic/optical methods. Thus, these systems enable on the one hand tumor cell detection with a high sensitivity, i.e. down to single tumor cell level, and on the other hand tumor destruction through various mechanisms in a controlled and localized manner by deciding whether or not to apply a beam of light and by having these nanomaterials specifically target tumor cells.

Advanced materials and technologies for supercapacitors used in energy conversion and storage: a review

Supercapacitors are increasingly used for energy conversion and storage systems in sustainable nanotechnologies. Graphite is a conventional electrode utilized in Li-ion-based batteries, yet its specific capacitance of 372 mA h g−1 is not adequate for supercapacitor applications. Interest in supercapacitors is due to their high-energy capacity, storage for a shorter period and longer lifetime. This review compares the following materials used to fabricate supercapacitors: spinel ferrites, e.g., MFe2O4, MMoO4 and MCo2O4 where M denotes a transition metal ion; perovskite oxides; transition metals sulfides; carbon materials; and conducting polymers. The application window of perovskite can be controlled by cations in sublattice sites. Cations increase the specific capacitance because cations possess large orbital valence electrons which grow the oxygen vacancies. Electrodes made of transition metal sulfides, e.g., ZnCo2S4, display a high specific capacitance of 1269 F g−1, which is four times higher than those of transition metals oxides, e.g., Zn–Co ferrite, of 296 F g−1. This is explained by the low charge-transfer resistance and the high ion diffusion rate of transition metals sulfides. Composites made of magnetic oxides or transition metal sulfides with conducting polymers or carbon materials have the highest capacitance activity and cyclic stability. This is attributed to oxygen and sulfur active sites which foster electrolyte penetration during cycling, and, in turn, create new active sites.

Use of Superparamagnetic Iron Oxide Nanoparticles (SPIONs) via Multiple Imaging Modalities and Modifications to Reduce Cytotoxicity: An Educational Review

The aim of the present educational review on superparamagnetic iron oxide nanoparticles (SPIONs) is to inform and guide young scientists and students about the potential use and challenges associated with SPIONs. The present review discusses the basic concepts of magnetic resonance imaging (MRI), basic construct of SPIONs, cytotoxic challenges associated with SPIONs, shape and sizes of SPIONs, site-specific accumulation of SPIONs, various methodologies applied to reduce cytotoxicity including coatings with various materials, and application of SPIONs in targeted delivery of chemotherapeutics (Doxorubicin), biotherapeutics (DNA, siRNA), and positron emission tomography (PET) imaging applications.

Direct Photon-by-Photon Analysis of Time-Resolved Pulsed Excitation Data using Bayesian Nonparametrics

Lifetimes of chemical species are typically estimated by either fitting time-correlated single-photon counting (TCSPC) histograms or phasor analysis from time-resolved photon arrivals. While both methods yield lifetimes in a computationally efficient manner, their performance is limited by choices made on the number of distinct chemical species contributing photons. However, the number of species is encoded in the photon arrival times collected for each illuminated spot and need not be set by hand a priori. Here, we propose a direct photon-by-photon analysis of data drawn from pulsed excitation experiments to infer, simultaneously and self-consistently, the number of species and their associated lifetimes from a few thousand photons. We do so by leveraging new mathematical tools within the Bayesian nonparametric. We benchmark our method for both simulated and experimental data for 1-4 species.

Supramolecular Container-Mediated Surface Engineering Approach for Regulating the Biological Targeting Effect of Nanoparticles

Surface chemistry is essential for the biomedical applications of functional nanomaterials. Here, a supramolecular container-based surface engineering approach is designed to impart excellent water dispersibility and precisely control the orientation of surface targeting ligands of the nanoparticles. An acyclic cucurbituril (aCB) molecular container is used as a chemical bridge to incorporate nanoparticles and targeting ligands via a bilateral host-guest complexation, enabling the bioactive moieties of targeting ligands to be fully exposed and faced outward to facilitate biological targeting. The enhanced biological targeting effect as well as targeted imaging performance of aCB-engineered nanoparticles are demonstrated in vitro and in vivo. Molecular dynamic simulations illustrate a tight binding of targeting ligand to the relevant receptor with the assistance of the aCB molecular container for the enhanced targeting efficiency, representing an attractive extension of supramolecular chemistry-based technology for nanoparticle surface engineering and supramolecularly regulated biological targeting.

Multifunctional Hypoxia-Involved Gene Silencing Nanoplatform for Sensitizing Photochemotherapy

The integration of combinational photochemotherapy could achieve a promoted therapeutic performance by eliminating the frustrating side effects of each constitute, yet it is still confronted with severe therapeutic resistances that are associated with tumor hypoxia. Herein, we designed a multifunctional gene-therapy-promoted photochemotherapy strategy for specifically alleviating the hypoxia-associated therapeutic resistance. The pH-responsive zeolitic imidazolate framework-8 (ZIF-8) nanoparticles (CDHNs) facilitated the effective delivery of therapeutic agents (chlorin e6 (Ce6), doxorubicin (DOX), and HIF-1α siRNA) into the tumor for relieving specifically photochemotherapy resistance via sequential activation manners under the guidance of fluorescence imaging. The present all-in-one compact CDHNs system provides a smart and versatile multiply gained therapeutic strategy to activate the specific cellular pathways and is anticipated to boost future cancer diagnosis and post-treatment.

Responsive Fluorophore Aggregation Provides Spectral Contrast for Fluorescence Lifetime Imaging

Fluorophores experience altered emission lifetimes when incorporated into and liberated from macromolecules or molecular aggregates; this trend suggests the potential for a fluorescent, responsive probe capable of undergoing self-assembly and aggregation and consequently altering the lifetime of its fluorescent moiety to provide contrast between the active and inactive probes. We developed a cyanobenzothioazole-fluorescein conjugate (1), and spectroscopically examined the lifetime changes caused by its reduction-induced aggregation in vitro. A decrease in lifetime was observed for compound 1 in a buffered system activated by the biological reducing agent glutathione, thus suggesting a possible approach for designing responsive self-aggregating lifetime imaging probes.

Novel Controlled Release Microspheric Soil Conditioner Based on the Temperature and pH Dual-Stimuli Response

A novel type of temperature and pH dual-stimuli-responsive microspheric soil conditioner was prepared for the controlled release of urea. First, poly(N-isopropylacrylamide-co-methacrylic acid) [P(NIPAM-co-MAA)] was synthesized, and the microspheric soil conditioner was prepared on the basis of chitosan-coated P(NIPAM-co-MAA) via the emulsion cross-linking method. The structure and morphology of the microsphere were characterized by Fourier transform infrared spectroscopy, hydrogen nuclear magnetic resonance, polarization optical microscopy, and scanning electron microscopy. The microsphere showed controlled release behavior in different temperature and pH conditions, indicating good stimuli responsiveness. The plant experiment revealed that the microsphere can effectively promote plant growth in acidified soil and high-temperature conditions, and the pH value of acidified soil could be improved. In addition, the microsphere possessed good biodegradation property in the soil. Therefore, the multi-responsive microspheric soil conditioner owns a great potential value to amend soil conditions and promote plant growth in agriculture applications.

Mechanistic Insights into the Release of Doxorubicin from Graphene Oxide in Cancer Cells

Liposomal doxorubicin (L-DOX) is a popular drug formulation for the treatment of several cancer types (e.g., recurrent ovarian cancer, metastatic breast cancer, multiple myeloma, etc.), but poor nuclear internalization has hampered its clinical applicability so far. Therefore, novel drug-delivery nanosystems are actively researched in cancer chemotherapy. Here we demonstrate that DOX-loaded graphene oxide (GO), GO-DOX, exhibits much higher anticancer efficacy as compared to its L-DOX counterpart if administered to cellular models of breast cancer. Then, by a combination of live-cell confocal imaging and fluorescence lifetime imaging microscopy (FLIM), we suggest that GO-DOX may realize its superior performances by inducing massive intracellular DOX release (and its subsequent nuclear accumulation) upon binding to the cell plasma membrane. Reported results lay the foundation for future exploitation of these new adducts as high-performance nanochemotherapeutic agents.

Investigation of cellular uptake mechanism of functionalised gold nanoparticles into breast cancer using SERS

Gold nanoparticles (AuNPs) are widely used in various applications such as cancer imaging and drug delivery. The functionalisation of AuNPs has been shown to affect their cellular internalisation, accumulation and targeting efficiency. The mechanism of cellular uptake of functionalised AuNPs by different cancer cells is not well understood. Therefore, a detailed understanding of the molecular processes is necessary to improve AuNPs for their selective uptake and fate in specific cellular systems. This knowledge can greatly help in designing nanotags with higher cellular uptake for more selective and specific targeting capabilities with less off-target effects. Here, we demonstrate for the first time a straightforward and non-destructive 3D surface enhanced Raman spectroscopy (SERS) imaging approach to track the cellular uptake and localisation of AuNPs functionalised with an anti-ERα (estrogen receptor alpha) antibody in MCF-7 ERα-positive human breast cancer cells under different conditions including temperature and dynamin inhibition. 3D SERS enabled information rich monitoring of the intracellular internalisation of the SERS nanotags. It was found that ERα-AuNPs were internalised by MCF-7 cells in a temperature-dependent manner suggesting an active endocytosis-dependent mechanism. 3D SERS cell mapping also indicated that the nanotags entered MCF-7 cells using dynamin dependent endocytosis, since dynamin inhibition resulted in the SERS signal being obtained from, or close to, the cell surface rather than inside the cells. Finally, ERα-AuNPs were found to enter MCF-7 cells using an ERα receptor-mediated endocytosis process. This study addresses the role of functionalisation of SERS nanotags in biological environments and highlights the benefits of using 3D SERS for the investigation of cellular uptake processes.

Faster, sharper, more precise: Automated Cluster-FLIM in preclinical testing directly identifies the intracellular fate of theranostics in live cells and tissue

Fluorescence microscopy is widely used for high content screening in 2D cell cultures and 3D models. In particular, 3D tissue models are gaining major relevance in modern drug development. Enabling direct multiparametric evaluation of complex samples, fluorescence lifetime imaging (FLIM) adds a further level to intensity imaging by the sensitivity of the fluorescence lifetime to the microenvironment. However, the use of FLIM is limited amongst others by the acquisition of sufficient photon numbers without phototoxic effects in live cells. Herein, we developed a new cluster-based analysis method to enhance insight, and significantly speed up analysis and measurement time for the accurate translation of fluorescence lifetime information into pharmacological pathways. Methods: We applied a fluorescently-labeled dendritic core-multishell nanocarrier and its cargo Bodipy as molecules of interest (MOI) to human cells and reconstructed human tissue. Following the sensitivity and specificity assessment of the fitting-free Cluster-FLIM analysis of data in silico and in vitro, we evaluated the dynamics of cellular molecule uptake and intracellular interactions. For 3D live tissue investigations, we applied multiphoton (mp) FLIM. Owing to Cluster-FLIM's statistics-based fitting-free analysis, we utilized this approach for automatization. Results: To discriminate the fluorescence lifetime signatures of 5 different fluorescence species in a single color channel, the Cluster-FLIM method requires only 170, respectively, 90 counts per pixel to obtain 95% sensitivity (hit rate) and 95% specificity (correct rejection rate). Cluster-FLIM revealed cellular interactions of MOIs, representing their spatiotemporal intracellular fate. In a setting of an automated workflow, the assessment of lysosomal trapping of the MOI revealed relevant differences between normal and tumor cells, as well as between 2D and 3D models. Conclusion: The automated Cluster-FLIM tool is fitting-free, providing images with enhanced information, contrast, and spatial resolution at short exposure times and low fluorophore concentrations. Thereby, Cluster-FLIM increases the applicability of FLIM in high content analysis of target molecules in drug development and beyond.

Monitoring the Cellular Delivery of Doxorubicin-Cu Complexes in Cells by Fluorescence Lifetime Imaging Microscopy

In the prodrug research field, information obtained from traditional end point biochemical assays in drug effect studies could provide neither the dynamic processes nor heterogeneous responses of individual cells. In situ imaging microscopy techniques, especially fluorescence lifetime imaging microscopy (FLIM), could fulfill these requirements. In this work, we used FLIM techniques to observe the entry and release of doxorubicin (Dox)-Cu complexes in live KYSE150 cells. The Dox-Cu complex has weaker fluorescence signals but similar lifetime values as compared to the raw Dox, whose fluorescence could be released by the addition of biothiol compound (such as glutathione). The cell viability results indicated that the Dox-Cu compound has a satisfactory killing effect on KYSE150 cells. The FLIM data showed that free doxorubicin was released from Dox-Cu complexes in cytoplasm of KYSE150 cells and then accumulated in the nucleus. After 90 min administration, the fluorescence lifetime signals reached 1.21 and 1.46 ns in the cytoplasm and nucleus, respectively, reflecting the transformation and transportation of Dox-Cu complexes. In conclusion, this work provides a satisfactory example for the research of prodrug monitored by FLIM techniques, expanding the useful applications of FLIM technique in drug development.

High-Efficiency Fluorescence through Bioinspired Supramolecular Self-Assembly

Peptide self-assembly has attracted extensive interest in the field of eco-friendly optoelectronics and bioimaging due to its inherent biocompatibility, intrinsic fluorescence, and flexible modulation. However, the practical application of such materials was hindered by the relatively low quantum yield of such assemblies. Here, inspired by the molecular structure of BFPms1, we explored the "self-assembly locking strategy" to design and manipulate the assembly of metal-stabilized cyclic(l-histidine-d-histidine) into peptide material with the high-fluorescence efficiency. We used this bioorganic material as an emissive layer in photo- and electroluminescent prototypes, demonstrating the feasibility of utilizing self-assembling peptides to fabricate a biointegrated microchip that incorporates eco-friendly and tailored optoelectronic properties. We further employed a "self-encapsulation" strategy for constructing an advanced nanocarrier with integrated in situ monitoring. The strategy of the supramolecular capture of functional components exemplifies the use of bioinspired organic chemistry to provide frontiers of smart materials, potentially allowing a better interface between sustainable optoelectronics and biomedical applications.

Facile Dye-Initiated Polymerization of Lactide-Glycolide Generates Highly Fluorescent Poly(lactic-co-glycolic Acid) for Enhanced Characterization of Cellular Delivery

Poly(lactic-co-glycolic acid) (PLGA) is a versatile synthetic copolymer that is widely used in pharmaceutical applications. This is because it is well-tolerated in the body, and copolymers of varying physicochemical properties are readily available via ring-opening polymerization. However, native PLGA polymers are hard to track as drug delivery carriers when delivered to subcellular spaces, due to the absence of an easily accessible "handle" for fluorescent labeling. Here we show a one-step, scalable, solvent-free, synthetic route to fluorescent blue (2-aminoanthracene), green (5-aminofluorescein), and red (rhodamine-6G) PLGA, in which every polymer chain in the sample is fluorescently labeled. The utility of initiator-labeled PLGA was demonstrated through the preparation of nanoparticles, capable of therapeutic subcellular delivery to T-helper-precursor-1 (THP-1) macrophages, a model cell line for determining in vitro biocompatibility and particle uptake. Super resolution confocal fluorescence microscopy imaging showed that dye-initiated PLGA nanoparticles were internalized to punctate regions and retained bright fluorescence over at least 24 h. In comparison, PLGA nanoparticles with 5-aminofluorescein introduced by conventional nanoprecipitation/encapsulation showed diffuse and much lower fluorescence intensity in the same cells and over the same time periods. The utility of this approach for in vitro drug delivery experiments was demonstrated through the concurrent imaging of the fluorescent drug doxorubicin (λ_ex = 480 nm, λ_em = 590 nm) with carrier 5-aminofluorescein PLGA, also in THP-1 cells, in which the intracellular locations of the drug and the polymer could be clearly visualized. Finally, the dye-labeled particles were evaluated in an in vivo model, via delivery to the nematode Caenorhabditis elegans, with bright fluorescence again apparent in the internal tract after 3 h. The results presented in this manuscript highlight the ease of synthesis of highly fluorescent PLGA, which could be used to augment tracking of future therapeutics and accelerate in vitro and in vivo characterization of delivery systems prior to clinical translation.

3D cultures for modeling nanomaterial-based photothermal therapy

Photothermal therapy (PTT) is one of the most promising techniques for cancer tumor ablation. Nanoparticles are increasingly being investigated for use with PTT and can serve as theranostic agents. Based on the ability of near-infrared nano-photo-absorbers to generate heat under laser irradiation, PTT could prove advantageous in certain situations over more classical cancer therapies. To analyze the efficacy of nanoparticle-based PTT, preclinical in vitro studies typically use 2D cultures, but this method cannot completely mimic the complex tumor organization, bioactivity, and physiology that all control the complex penetration depth, biodistribution, and tissue diffusion parameters of nanomaterials in vivo. To fill this knowledge gap, 3D culture systems have been explored for PTT analysis. These models provide more realistic microenvironments that allow spatiotemporal oxygen gradients and cancer cell adaptations to be considered. This review highlights the work that has been done to advance 3D models for cancer microenvironment modeling, specifically in the context of advanced, functionalized nanoparticle-directed PTT.