Energy level modification in lead sulfide quantum dot thin films through ligand exchange

Emerging Opportunities of Colloidal Quantum Dots for Photocatalytic Organic Transformations

Colloidal quantum dots (QDs) have emerged as a versatile photocatalyst for a wide range of photocatalytic transformations owing to its high absorption coefficient, large surface-to-volume ratio, high stability, and efficient charge and energy transfer dynamics. The past decades have witnessed a rapid development of QDs for artificial photocatalysis. In this review, the unique characteristics of QDs are focused on, including quantum size effect, compositional and structural diversity, tunable surface chemistry, and photophysics, that can be utilized for photocatalytic transformations. The recent advancements in photocatalytic organic transformations enabled by QDs photocatalysts are summarized. The unique opportunities of QDs are highlighted to tackle organic reactions that are previously unattainable with small molecule photocatalysts. Lastly, an outlook is provided for future directions in this field.

Quantitative photocurrent scanning probe microscopy on PbS quantum dot monolayers

Photoconductive atomic force microscopy can probe monolayers of PbS/perovskite quantum dots (QDs) with a contact area of 1-3 QDs in stable and reproducible acquisition conditions for I/V curves and photocurrent maps. From the measurements, quantitative values for the barrier height, built-in voltage, diffusion constant and ideality factor are deduced with high precision. The data analysis is based on modelling a superposition of the drift current of the photo-excited charges and a diffusion current across the interface barriers, providing physical insight into the underlying processes. Besides looking into PbS/perovskite on an indium tin oxide substrate, it is shown how the photocurrent is modified by changing either the QD ligand (to thiocyanate) or the substrate (to micro- and nanostructured gold). The dependence of the photocurrent on the light irradiance is found to follow a power law with an exponent of 0.64. Generally, quantitative measurements with high spatial resolution (on the single QD level) can provide significant insight into the processes in nanostructured hybrid optoelectronic components.

AFM-IR of Electrohydrodynamically Printed PbS Quantum Dots: Quantifying Ligand Exchange at the Nanoscale

Colloidal quantum dots (cQDs), semiconductor materials with widely tunable properties, can be printed in submicrometer patterns through electrohydrodynamic printing, avoiding aggressive photolithography steps. Postprinting ligand exchange determines the final optoelectronic properties of the cQD structures. However, achieving a complete bulk exchange is challenging, and the conventional vibrational analysis lacks the required spatial resolution. Infrared nanospectroscopy enables quantitative analysis of vibrational signals and structural topography on the nanometer scale upon ligand substitution on lead sulfide cQDs. A solution of ethanedithiol led to rapid (∼60 s) exchange of ≤90% of the ligands, in structures up to ∼750 nm thick. Prolonged exposures (>1 h) caused the degradation of the microstructures, with a systematic removal of cQDs regulated by surface:bulk ratios and solvent interactions. This study establishes a method for the development of devices through a combination of tunable photoactive materials, additive manufacturing of microstructures, and their quantitative nanometer-scale analysis.

Band Engineering of Perovskite Quantum Dot Solids for High-Performance Solar Cells

CsPbI3 perovskite quantum dot (PQD) shows high potential for next-generation photovoltaics due to their tunable surface chemistry, good solution-processability and unique photophysical properties. However, the remained long-chain ligand attached to the PQD surface significantly impedes the charge carrier transport within the PQD solids, thereby predominantly influencing the charge extraction of PQD solar cells (PQDSCs). Herein, a ligand-induced energy level modulation is reported for band engineering of PQD solids to improve the charge extraction of PQDSCs. Detailed theoretical calculations and systemic experimental studies are performed to comprehensively understand the photophysical properties of the PQD solids dominated by the surface ligands of PQDs. The results reveal that 4-nitrobenzenethiol and 4-methoxybenzenethiol molecules with different dipole moments can firmly anchor to the PQD surface through the thiol group to modulate the energy levels of PQDs, and a gradient band structure within the PQD solid is subsequently realized. Consequently, the band-engineered PQDSC delivers an efficiency of up to 16.44%, which is one of the highest efficiencies of CsPbI3 PQDSCs. This work provides a feasible avenue for the band engineering of PQD solids by tuning the surface chemistry of PQDs for high-performing solar cells or other optoelectronic devices.

Implications for applicability of the photodegradation and self-recovery of green-emitting CsPbBr3 perovskite nanocrystals

CsPbBr3 nanocrystals (NCs) synthesized by the conventional hot-injection method are photochromatic luminescent nanomaterials due to the photoinduced desorption and re-adsorption of the surface ligands. The apparent color and the luminescence intensity were changed significantly during excitation light irradiation and following dark storage; however, the emission wavelength was almost retained. This work investigates the change in emission color of light-emitting diode lighting using the CsPbBr3 NCs to realize photochromatic luminescence. The results showed definite shifts in emission color caused by changes in optical absorption and green luminescence intensity of the NCs, potentially broadening the application feasibility of CsPbBr3 NCs as photochromatic luminescent nanomaterials.

Synthesis and Processing Strategy for High-Bandgap PbS Quantum Dots: A Promising Candidate for Harvesting High-Energy Photons in Solar Cells

The wide tunability of the energy bandgap of colloidal lead sulfide (PbS) quantum dots (QDs) has uniquely positioned them for the development of single junction and tandem solar cells. While there have been substantial advancements in moderate and narrow bandgap PbS QDs-ideal for single junction solar cells and the bottom cell in tandem solar cells, respectively; progress has been limited in high-bandgap PbS QDs that are ideally suited for the formation of the top cell in tandem solar cells. The development of appropriate high bandgap PbS QDs would be a major advancement toward realizing efficient all-QD tandem solar cells utilizing different sizes of PbS QDs. Here, we report a comprehensive approach encompassing synthetic strategy, ligand engineering, and hole transport layer (HTL) modification to implement high-bandgap PbS QDs into solar cell devices. We achieved a greater degree of size homogeneity in high-bandgap PbS QDs through the use of a growth retarding agent and a partial passivation strategy. By adjusting the ligand polarity, we successfully grow HTL over the QD film to fabricate solar cells. With the aid of an interface modifying layer, we incorporated an organic HTL for the realization of high-performance solar cells. These solar cells exhibited an impressive open-circuit voltage of 0.824 V and a power conversion efficiency of 10.7%, marking a 360% improvement over previous results.

Probing surface interactions in CdSe quantum dots with thiocyanate ligands

Surface chemistry dictates the optoelectronic properties of semiconductor quantum dots (QDs). Tailoring these properties relies on the meticulous selection of surface ligands for efficient passivation. While long-chain organic ligands boast a well-understood passivation mechanism, the intricacies of short inorganic ionic ligands remain largely unexplored. This study sheds light on the surface-passivation mechanism of short inorganic ligands, particularly focusing on SCN- ions on CdSe QDs. Employing steady-state and time-resolved infrared spectroscopic techniques, we elucidated the surface-ligand interactions and coordination modes of SCN--capped CdSe QDs. Comparative analysis with studies on CdS QDs unveils intriguing insights into the coordination behavior and passivation efficacy of SCN- ions on Cd2+ rich QD surfaces. Our results reveal the requirement of both surface-bound (strong binding) and weakly-interacting interfacial SCN- ions for effective CdSe QD passivation. Beyond fostering a deeper understanding of surface-ligand interactions and highlighting the importance of a comprehensive exploration of ligand chemistries, this study holds implications for optimizing QD performance across diverse applications.

Advancing Silver Bismuth Sulfide Quantum Dots for Practical Solar Cell Applications

Colloidal quantum dots (CQDs) show unique properties that distinguish them from their bulk form, the so-called quantum confinement effects. This feature manifests in tunable size-dependent band gaps and discrete energy levels, resulting in distinct optical and electronic properties. The investigation direction of colloidal quantum dots (CQDs) materials has started switching from high-performing materials based on Pb and Cd, which raise concerns regarding their toxicity, to more environmentally friendly compounds, such as AgBiS2. After the first breakthrough in solar cell application in 2016, the development of AgBiS2 QDs has been relatively slow, and many of the fundamental physical and chemical properties of this material are still unknown. Investigating the growth of AgBiS2 QDs is essential to understanding the fundamental properties that can improve this material's performance. This review comprehensively summarizes the synthesis strategies, ligand choice, and solar cell fabrication of AgBiS2 QDs. The development of PbS QDs is also highlighted as the foundation for improving the quality and performance of AgBiS2 QD. Furthermore, we prospectively discuss the future direction of AgBiS2 QD and its use for solar cell applications.

Heavy-Metal-Free Colloidal Quantum Dots: Progress and Opportunities in Solar Technologies

Colloidal quantum dots (QDs) hold great promise as building blocks in solar technologies owing to their remarkable photostability and adjustable properties through the rationale involving size, atomic composition of core and shell, shapes, and surface states. However, most high-performing QDs in solar conversion contain hazardous metal elements, including Cd and Pb, posing significant environmental risks. Here, a comprehensive review of heavy-metal-free colloidal QDs for solar technologies, including photovoltaic (PV) devices, solar-to-chemical fuel conversion, and luminescent solar concentrators (LSCs), is presented. Emerging synthetic strategies to optimize the optical properties by tuning the energy band structure and manipulating charge dynamics within the QDs and at the QDs/charge acceptors interfaces, are analyzed. A comparative analysis of different synthetic methods is provided, structure-property relationships in these materials are discussed, and they are correlated with the performance of solar devices. This work is concluded with an outlook on challenges and opportunities for future work, including machine learning-based design, sustainable synthesis, and new surface/interface engineering.

Photo-Driven Ion Directional Transport across Artificial Ion Channels: Band Engineering of WS2 via Peptide Modification

Biological photo-responsive ion channels play important roles in the important metabolic processes of living beings. To mimic the unique functions of biological prototypes, the transition metal dichalcogenides, owing to their excellent mechanical, electrical, and optical properties, are already used for artificial intelligent channel constructions. However, there remain challenges to building artificial bio-semiconductor nanochannels with finely tuned band gaps for accurately simulating or regulating ion transport. Here, two well-designed peptides are employed for the WS2 nanosheets functionalization with the sequences of PFPFPFPFC and DFDFDFDFC (PFC and DFC; P: proline, D: aspartate, and F: phenylalanine) through cysteine (Cys, C) linker, and an asymmetric peptide-WS2 membrane (AP-WS2M) could be obtained via self-assembly of peptide-WS2 nanosheets. The AP-WS2M could realize the photo-driven anti-gradient ion transport and vis-light enhanced osmotic energy conversion by well-designed working patterns. The photo-driven ion transport mechanism stems from a built-in photovoltaic motive force with the help of formed type II band alignment between the PFC-WS2 and DFC-WS2. As a result, the ions would be driven across the channels of the membrane for different applications. The proposed system provides an effective solution for building photo-driven biomimetic 2D bio-semiconductor ion channels, which could be extensively applied in the fields of drug delivery, desalination, and energy conversion.

Light-Powered Directional Ion Transport via PFN-Br/MoS2 Heterogeneous Membranes: Band Alignment and Activation Energy Barrier Engineering

Biological photoresponsive ion transport systems consistently attract researchers' attention owing to their remarkable functions of harvesting energy from nature and participating in visual perception systems. Designing and constructing artificial light-driven ion transport devices to mimic biological counterparts remains a challenge owing to fabrication limitations in nanoconfined spaces. Herein, a typical conjugated polyelectrolyte (PFN-Br) was assembled onto a laminated MoS2M using simple solution-processing vacuum filtration, resulting in a heterogeneous three- and two-dimensional nanoporous membrane. The designed band alignment between PFN-Br and MoS2 enables effective directional ion transport under irradiation in an equilibrium solution, even against a 30-fold concentration gradient. The staggered energy structure of PFN-Br and MoS2 enhances charge separation and establishes a photogenerated potential as the driving force for ion transport. Additionally, the activation energy barrier for ion transport across the heterogeneous membrane decreased by 60% after light irradiation, considerably improving ion transport flux. The easy fabrication and high performance of the membrane in light-powered ion transport provide promising approaches for designing nanofluidic devices with possible applications in energy conversion, light-enhanced biosensing, and photoresponsive ionic devices.

Ligand-Induced Size-Dependent Circular Dichroism in Quantum Dots

Recent experiments have probed the chiral properties of semiconductor nanocrystal (NC) quantum dots (QDs), but understanding the circular dichroism line shape, excitonic features, and chirality induction mechanism remains a challenge. We propose an atomistic pseudopotential method to model chiral ligand passivated QDs, computing circular dichroism (CD) spectra for CdSe QDs (2.6-3.8 nm). We find strong agreement between calculated and measured line shapes, predicting consistent bisignate line shapes with decreasing CD magnitude as size increases. Our analysis reveals the origin of bisignate line shapes, arising from nondegenerate excitons with opposing angular momenta. We also explore the impact of chiral ligand orientation on QD surfaces, observing changes in the optical activity magnitude and sign. This orientation sensitivity offers the means to distinguish ordered from disordered ligand configurations, facilitating the study of order-disorder transitions at ligand-QD interfaces.

PbI2 Passivation of Three Dimensional PbS Quantum Dot Superlattices Toward Optoelectronic Metamaterials

Lead chalcogenide colloidal quantum dots are one of the most promising materials to revolutionize the field of short-wavelength infrared optoelectronics due to their bandgap tunability and strong absorption. By self-assembling these quantum dots into ordered superlattices, mobilities approaching those of the bulk counterparts can be achieved while still retaining their original optical properties. The recent literature focused mostly on PbSe-based superlattices, but PbS quantum dots have several advantages, including higher stability. In this work, we demonstrate highly ordered 3D superlattices of PbS quantum dots with tunable thickness up to 200 nm and high coherent ordering, both in-plane and along the thickness. We show that we can successfully exchange the ligands throughout the film without compromising the ordering. The superlattices as the active material of an ion gel-gated field-effect transistor achieve electron mobilities up to 220 cm2 V-1 s-1. To further improve the device performance, we performed a postdeposition passivation with PbI2, which noticeably reduced the subthreshold swing making it reach the Boltzmann limit. We believe this is an important proof of concept showing that it is possible to overcome the problem of high trap densities in quantum dot superlattices enabling their application in optoelectronic devices.

Water-Soluble Lead Sulfide Nanoparticles: Direct Synthesis and Ligand Exchange Routes

Colloidal semiconductor nanoparticles (NPs) represent an emergent state of matter with unique properties, bridging bulk materials and molecular structures. Their distinct physical attributes, such as bandgap and photoluminescence, are intricately tied to their size and morphology. Ligand passivation plays a crucial role in shaping NPs and determining their physical properties. Ligand exchange (LE) offers a versatile approach to tailoring NP properties, often guided by Pearson's Hard-Soft Acid-Base theory. Lead sulfide (PbS), a semiconductor of considerable interest, exhibits size-dependent tunable bandgaps from the infrared to the visible range. Here, we present two methods for synthesizing water-soluble, polyvinylpyrrolidone (PVP)-coated PbS NPs. The first involves direct synthesis in an aqueous solution while utilizing PVP as the surfactant for the formation of nano-cubes with a crystal coherence length of ~30 nm, while the second involves LE from octadecylamine-coated PbS truncated nano-cubes to PVP-coated PbS NPs with a crystal coherence length of ~15 nm. Multiple characterization techniques, including X-ray diffraction, transmission electron microscopy, Fourier-transform infrared spectroscopy, and thermal gravimetric analysis, confirmed the results of the synthesis and allowed us to monitor the ligand exchange process. Our findings demonstrate efficient and environmentally friendly approaches for synthesizing PVP-coated PbS NPs.

Improved Charge Injection Balance in Quantum Dot Light-Emitting Diodes through Interface Texture

The existing methods to improve the charge balance of quantum dot light-emitting diodes (QLEDs) rely on energy-level matching, but these approaches have been limited by material availability and Fermi-level pinning. Here, we propose a solution that does not require changes to the materials' electronic properties. By using nanoimprinting technology to texture the interface between the hole-transporting layer (HTL) and colloidal quantum dot (CQD) layer, we can increase the HTL-CQD contact area. This significantly enhances the hole injection rate while keeping the electron injection rate essentially unchanged. Compared with the conventional planar structure, QLEDs with textured HTL exhibit lower luminance threshold voltage, significantly higher external quantum efficiency at low bias voltages, improved operational stability, and a similar Lambertian factor. Comprehensive measurements confirm that the HTL-CQD interface texture allows more efficient hole injection into CQDs to occur under lower bias, resulting in less CQD charging and more efficient exciton recombination.

How Depletion Layers Govern the Dynamic Plasmonic Response of In-Doped CdO Nanocrystals

Doped metal oxide nanocrystals exhibit a localized surface plasmon resonance that is widely tunable across the mid- to near-infrared region, making them useful for applications in optoelectronics, sensing, and photocatalysis. Surface states pin the Fermi level and induce a surface depletion layer that hinders conductivity and refractive index sensing but can be advantageous for optical modulation. Several strategies have been developed to both synthetically and postsynthetically tailor the depletion layer toward particular applications; however, this understanding has primarily been advanced in Sn-doped In2O3 (ITO) nanocrystals, leaving open questions about generalizing to other doped metal oxides. Here, we quantitatively analyze the depletion layer in In-doped CdO (ICO) nanocrystals, which is shown to have an intrinsically wide depletion layer that leads to broad plasmonic modulation via postsynthetic chemical reduction and ligand exchange. Leveraging these insights, we applied depletion layer tuning to enhance the inherently weak plasmonic coupling in ICO nanocrystal superlattices. Our results demonstrate how an electronic band structure dictates the radial distribution of electrons and governs the response to postsynthetic modulation, enabling the design of tunable and responsive plasmonic materials.

Optimizing Energy Levels and Improving Film Compactness in PbS Quantum Dot Solar Cells by Silver Doping

PbS quantum dot (QD) solar cells harvest near-infrared solar radiation. Their conventional hole transport layer has limited hole collection efficiency due to energy level mismatch and poor film quality. Here, how to resolve these two issues by using Ag-doped PbS QDs are demonstrated. On the one hand, Ag doping relieves the compressive stress during layer deposition and thus improves film compactness and homogeneity to suppress leakage currents. On the other hand, Ag doping increases hole concentration, which aligns energy levels and increases hole mobility to boost hole collection. Increased hole concentration also broadens the depletion region of the active layer, decreasing interface charge accumulation and promoting carrier extraction efficiency. A champion power conversion efficiency of 12.42% is achieved by optimizing the hole transport layer in PbS QD solar cells, compared to 9.38% for control devices. Doping can be combined with compressive strain relief to optimize carrier concentration and energy levels in QDs, and even introduce other novel phenomena such as improved film quality.

Oligomeric Zinc Thiolates Tethering Multidentate Carboxylates for Nondestructive Aqueous Phase Transfer of Quantum Dots

Functionalization of quantum dots (QDs) via ligand exchange is prone to debase their photoluminescence quantum yield (PL QY) owing to the unavoidable surface damage by excess reactants, and even worse in aqueous medium. Herein, the oligomeric zinc thiolate as the multidentate hydrophilic ligand featuring facile synthetic protocol is proposed. A simple reaction between ZnCl2 and 3-mercaptopropionic acid produces oligomeric ligands containing 3-6 zinc thiolate units, where the terminal moieties provide multidentate anchoring to the surface as well as hydrophilicity. 2D proton nuclear Overhauser effect spectroscopy (2D 1H NOESY) and X-ray photoelectron spectroscopy (XPS) reveal that the oligomeric zinc thiolate ligands adsorb on the surface via multidentate metal carboxylate bindings without destruction of molecular structure, regardless of partial dissociation of thiolate branches in aqueous phase. Enhanced binding affinity granted by the multidentate nature allows for the effective exchange of original surface ligands without considerable surface deterioration. The zinc thiolate-capped Cd-free aqueous QDs exhibit a high photoluminescence quantum yield of ≈90% and extended stability against long-term storage and photochemical stress.

Structure Effects of Ligands in Gold-Ligand Complexes for Controlled Formation of Gold Nanoclusters

Metal nanoclusters (NCs) are a special class of nanoparticles composed of a precise number of metal atoms and ligands. Because the proportion of ligands to metal atoms is high in metal NCs, the ligand type determines the physical properties of metal NCs. Furthermore, ligands presumably govern the entire formation process of the metal NCs. However, their roles in the synthesis, especially as factors in the uniformity of metal NCs, are not understood. It is because the synthetic procedure of metal NCs is highly convoluted. The synthesis is initiated by the formation of various metal-ligand complexes, which have different numbers of atoms and ligands, resulting in different coordinations of metal. Moreover, these complexes, as actual precursors to metal NCs, undergo sequential transformations into a series of intermediate NCs before the formation of the desired NCs. Thus, to resolve the complicated synthesis of metal NCs and achieve their uniformity, it is important to investigate the reactivity of the complexes. Herein, we utilize a combination of mass spectrometry, density functional theory, and electrochemical measurements to understand the ligand effects on the reactivity of AuI-thiolate complexes toward the reductive formation of Au NCs. We discover that the stability of the complexes can be increased by either van der Waals interactions induced by the long carbon chain of ligands or by non-thiol functional groups in the ligands, which additionally coordinate with AuI in the complexes. Such structural effects of thiol ligands determine the reduction reactivity of the complexes and the amount of NaBH4 required for the controlled synthesis of the Au NCs.

Metal Fluorides Passivate II-VI and III-V Quantum Dots

Quantum dots (QDs) with metal fluoride surface ligands were prepared via reaction with anhydrous oleylammonium fluoride. Carboxylate terminated II-VI QDs underwent carboxylate for fluoride exchange, while InP QDs underwent photochemical acidolysis yielding oleylamine, PH3, and InF3. The final photoluminescence quantum yield (PLQY) reached 83% for InP and near unity for core-shell QDs. Core-only CdS QDs showed dramatic improvements in PLQY, but only after exposure to air. Following etching, the InP QDs were bound by oleylamine ligands that were characterized by the frequency and breadth of the corresponding ν(N-H) bands in the infrared absorption spectrum. The fluoride content (1.6-9.2 nm-2) was measured by titration with chlorotrimethylsilane and compared with the oleylamine content (2.3-5.1 nm-2) supporting the formation of densely covered surfaces. The influence of metal fluoride adsorption on the air stability of QDs is discussed.

High-Performance Self-Powered Quantum Dot Infrared Photodetector with Azide Ion Solution Treated Electron Transport Layer

The demand for self-powered photodetectors (PDs) capable of NIR detection without external power is growing with the advancement of NIR technologies such as LIDAR and object recognition. Lead sulfide quantum dot-based photodetectors (PbS QPDs) excel in NIR detection; however, their self-powered operation is hindered by carrier traps induced by surface defects and unfavorable band alignment in the zinc oxide nanoparticle (ZnO NP) electron-transport layer (ETL). In this study, an effective azide-ion (N3 -) treatment is introduced on a ZnO NP ETL to reduce the number of traps and improve the band alignment in a PbS QPD. The ZnO NP ETL treated with azide ions exhibited notable improvements in carrier lifetime and mobility as well as an enhanced internal electric field within the thin-film heterojunction of the ZnO NPs and PbS QDs. The azide-ion-treated PbS QPD demonstrated a increase in short-circuit current density upon NIR illumination, marking a responsivity of 0.45 A W-1, specific detectivity of 4 × 1011 Jones at 950 nm, response time of 8.2 µs, and linear dynamic range of 112 dB.

Bioinspired Light-Driven Proton Pump: Engineering Band Alignment of WS2 with PEDOT:PSS and PDINN

Bioinspired two-dimensional (2D) nanofluidic systems for photo-induced ion transport have attracted great attention, as they open a new pathway to enabling light-to-ionic energy conversion. However, there is still a great challenge in achieving a satisfactory performance. It is noticed that organic solar cells (OSCs, light-harvesting device based on photovoltaic effect) commonly require hole/electron transport layer materials (TLMs), PEDOT:PSS (PE) and PDINN (PD), respectively, to promote the energy conversion. Inspired by such a strategy, an artificial proton pump by coupling a nanofluidic system with TLMs is proposed, in which the PE- and PD-functionalized tungsten disulfide (WS2) multilayers construct a heterogeneous membrane, realizing an excellent output power of ≈1.13 nW. The proton transport is fine-regulated due to the TLMs-engineered band structure of WS2. Clearly, the incorporating TLMs of OSCs into 2D nanofluidic systems offers a feasible and promising approach for band edge engineering and promoting the light-to-ionic energy conversion.

Efficient and Stable Multicolor Emissions of the Coumarin-Modified Cs3LnCl6 Lead-Free Perovskite Nanocrystals and LED Application

Lanthanide-based lead-free perovskite materials hold great promise for the development of high-resolution full-color displays in the future. Here, various Cs3LnCl6 perovskite nanocrystals (NCs) emitting light across the visible to near-infrared spectrum with remarkably high photoluminescence quantum yield (PLQY) are systemically prepared. Especially, by introducing multifunctional coumarin small molecules into Cs3EuCl6 NCs as an intermediate state, Cs3EuCl6 NCs can achieve an impressive PLQY of 92.4% with pure red emission and an exceptional energy transfer efficiency of nearly 93.2%. Furthermore, the lanthanide-based electroluminescent devices in red, green, and blue are successfully fabricated. Among them, the Cs3EuCl6-NC-based red light-emitting diode (LED) demonstrates a FWHM of 18 nm at 617 nm, an external quantum efficiency up to 5.17%, and a maximum brightness of 2373 cd m-2, which is the most excellent reported for lead-free narrowband (within 20 nm) emission devices. Notably, these devices exhibit an operating half-life of 440 h at a brightness level of 100 cd m-2, surpassing the performance of most reported lead-free perovskite LEDs (PLEDs). This work opens up exciting possibilities for the future commercialization of lanthanide-based PLEDs in the display industry, paving the way for more vibrant, energy-efficient, and long-lasting display technologies.

Coulomb blockade and Coulomb staircases in CoBi nanoislands on SrTiO3(001)

We successfully fabricated two-dimensional metallic CoBi nanoislands on SrTiO3(001) substrate by molecular beam epitaxy, and systematically investigated their electronic structures by scanning tunneling microscopy and spectroscopyin situat 4.2 K. Coulomb blockade and Coulomb staircases with discrete and well-separated levels are observed for the individual nanoisland, which is attributed to single-electron tunneling via two tunnel junction barriers. They are in excellent agreement with the simulations based on orthodox theory. Furthermore, we demonstrated that the Coulomb blockade becomes weaker with increasing temperature and almost disappears at ∼22 K in our variable temperature experiment, and its full-width at half-maximum of dI/dVpeaks with temperature is ∼6 mV. Our results provide a new platform for designing single-electron transistors that have potential applications in future microelectronics.

Liquid lasing from solutions of ligand-engineered semiconductor nanocrystals

Semiconductor nanocrystals (NCs) can function as efficient gain materials with chemical versatility because of their surface ligands. Because the properties of NCs in solution are sensitive to ligand-environment interactions, local chemical changes can result in changes in the optical response. However, amplification of the optical response is technically challenging because of colloidal instability at NC concentrations needed for sufficient gain to overcome losses. This paper demonstrates liquid lasing from plasmonic lattice cavities integrated with ligand-engineered CdZnS/ZnS NCs dispersed in toluene and water. By taking advantage of calcium ion-induced aggregation of NCs in aqueous solutions, we show how lasing threshold can be used as a transduction signal for ion detection. Our work highlights how NC solutions and plasmonic lattices with open cavity architectures can serve as a biosensing platform for lab-on-chip devices.

Reversible Ligand Detachment from CdSe Quantum Dots Following Photoexcitation

The nanocrystal-ligand boundaries of colloidal quantum dots (QDs) mediate charge and energy transfer processes that underpin photochemical and photocatalytic transformations at their surfaces. We used time-resolved infrared spectroscopy combined with transient electronic spectroscopy to probe vibrational modes of the carboxylate anchoring groups of stearate ligands attached to cadmium selenide (CdSe) QDs that were optically excited in solid nanocrystal films. The vibrational frequencies of surface-bonded carboxylate groups revealed their interactions with surface-localized holes in the excited states of the QDs. We also observed transient and reversible photoinduced ligand detachment from CdSe nanocrystals within their excited state lifetime. By probing both surface charge distributions and ligand dynamics on QDs in their excited states, we open a pathway to explore how the nanocrystal-ligand boundary can be understood and controlled for the design of QD architectures that most effectively drive charge transfer processes in solar energy harvesting and photoredox catalysis applications.

Tuning electronic levels in photoactive hydroxylated titania nanosystems: combining the ligand dipole effect and quantum confinement

Reducing the size of titania (TiO2) to the nanoscale promotes the photoactive anatase phase for use in a range of applications from industrial catalysis to environment remediation. The nanoscale dimensions of these systems affect the magnitude of the electronic energy gap by quantum confinement. Upon interaction with aqueous environments or water vapour, the surfaces of these systems will also be hydroxylated to some degree. In turn, this affects the electronic energy levels due to the cumulative electrostatic effect of the dipolar hydroxyl (-OH) ligands (i.e. the ligand dipole effect). Using accurate density functional calculations, we investigate the combined effects of quantum confinement and the hydration-induced ligand dipole effect on a set of realistic titania nanosystems over a wide range of hydroxylation. Our detailed investigation reveals that, contrary to previous models, the ligand dipole effect does not-linearly depend on the ligand coverage due to the formation of inter-ligand OH⋯OH hydrogen bonds. To account for the resulting effects, we propose a refined model, which describes the ligand dipole effect more accurately in our systems. We show that both hydroxylation (by the ligand dipole effect) and size (by quantum confinement) have significant but distinct impacts on the electronic energy levels in nanotitania. As an example, we discuss how variations in these effects can be used to tune the highest unoccupied energy level in nanotitania for enhancing the efficiency of the hydrogen evolution reaction. Overall, we show that any specific energy shift can be achieved by a range of different combinations of nanosystem size and degree of hydroxylation, thus providing options for energy-level tuning while also allowing consideration of practical constraints (e.g. synthetic limitations, operating conditions) for photochemical applications.

Stronger Coupling of Quantum Dots in Hole Transport Layer Through Intermediate Ligand Exchange to Enhance the Efficiency of PbS Quantum Dot Solar Cells

Nowadays, the extensively used lead sulfide (PbS) quantum dot (QD) hole transport layer (HTL) relies on layer-by-layer method to replace long chain oleic acid (OA) ligands with short 1,2-ethanedithiol (EDT) ligands for preparation. However, the inevitable significant volume shrinkage caused by this traditional method will result in undesired cracks and disordered QD arrangement in the film, along with adverse increased defect density and inhomogeneous energy landscape. To solve the problem, a novel method for EDT passivated PbS QD (PbS-EDT) HTL preparation using small-sized benzoic acid (BA) as intermediate ligands is proposed in this work. BA is substituted for OA ligands in solution followed by ligand exchange with EDT layer by layer. With the new method, smoother PbS-EDT films with more ordered and closer QD packing are gained. It is demonstrated stronger coupling between QDs and reduced defects in the QD HTL owing to the intermediate BA ligand exchange. As a result, the suppressed nonradiative recombination and enhanced carrier mobility are achieved, contributing to ≈20% growth in short circuit current density (Jsc) and a 23.4% higher power conversion efficiency (PCE) of 13.2%. This work provides a general framework for layer-by-layer QD film manufacturing optimization.

Solvation Shifts the Band-Edge Position of Colloidal Quantum Dots by Nearly 1 eV

The optoelectronic properties of colloidal quantum dots (cQDs) depend critically on the absolute energy of the conduction and valence band edges. It is well known these band-edge energies are sensitive to the ligands on the cQD surface, but it is much less clear how they depend on other experimental conditions, like solvation. Here, we experimentally determine the band-edge positions of thin films of PbS and ZnO cQDs via spectroelectrochemical measurements. To achieve this, we first carefully evaluate and optimize the electrochemical injection of electrons and holes into PbS cQDs. This results in electrochemically fully reversible electron injection with >8 electrons per PbS cQDs, allowing the quantitative determination of the conduction band energy for PbS cQDs with various diameters and surface compositions. Surprisingly, we find that the band-edge energies shift by nearly 1 eV in the presence of different solvents, a result that also holds true for ZnO cQDs. We argue that complexation and partial charge transfer between solvent and surface ions are responsible for this large effect of the solvent on the band-edge energy. The trend in the energy shift matches the results of density functional theory (DFT) calculations in explicit solvents and scales with the energy of complexation between surface cations and solvents. As a first approximation, the solvent Lewis basicity can be used as a good descriptor to predict the shift of the conduction and valence band edges of solvated cQDs.

Suppression of Thermally Induced Surface Traps in Colloidal Quantum Dot Solids via Ultrafast Pulsed Light

Thermal annealing (TA) of colloidal quantum dot (CQD) films is considered an important process for recent high-performing CQD solar cells (SCs) due to its beneficial effects on CQD solids, including enhanced electrical conductivity, denser packing of CQD films, and the removal of organic residues and solvents. However, the conventional TA for CQDs, which requires several  minutes, leads to hydroxylation and oxidation on the CQD surface, resulting in the formation of trap states and a subsequent decline in SC performance. To address these challenges, this study introduces a flashlight annealing (FLA) technique that significantly reduces the annealing time to the millisecond scale. Through the FLA approach, it successfully suppressed hydroxylation and oxidation, resulting in decreased trap states within the CQD solids while simultaneously preserving their charge transport properties. As a result, CQD SCs treated with FLA exhibited a notable improvement, achieving an open-circuit voltage of 0.66 V compared to 0.63 V in TA-treated devices, leading to an increase in power conversion efficiency from 12.71% to 13.50%.

Efficient Photoelectrochemical Hydrogen Generation Based on Core Size Effect of Heterostructured Quantum Dots

Colloidal quantum dots (QDs) are shown to be effective as light-harvesting sensitizers of metal oxide semiconductor (MOS) photoelectrodes for photoelectrochemical (PEC) hydrogen (H2) generation. The CdSe/CdS core/shell architecture is widely studied due to their tunable absorption range and band alignment via engineering the size of each composition, leading to efficient carrier separation/transfer with proper core/shell band types. However, until now the effect of core size on the PEC performance along with tailoring the core/shell band alignment is not well understood. Here, by regulating four types of CdSe/CdS core/shell QDs with different core sizes (diameter of 2.8, 3.1, 3.5, and 4.8 nm) while the thickness of CdS shell remains the same (thickness of 2.0 ± 0.1 nm), the Type II, Quasi-Type II, and Type I core/shell architecture are successfully formed. Among these, the optimized CdSe/CdS/TiO2 photoelectrode with core size of 3.5 nm can achieve the saturated photocurrent density (Jph) of 17.4 mA cm-2 under standard one sun irradiation. When such cores are further optimized by capping alloyed shells, the Jph can reach values of 22 mA cm2 which is among the best-performed electrodes based on colloidal QDs.

Reduced Surface Trap States of PbS Quantum Dots by Acetonitrile Treatment for Efficient SnO2-Based PbS Quantum Dot Solar Cells

The solution-phase ligand-exchange strategy offers a simple pathway to prepare PbS quantum dots (QDs) and their corresponding solar cells. However, the production of high-quality PbS QDs with reduced surface trap state density for efficient PbS QD solar cells (QDSCs) still faces challenges. As the hydroxyl group (-OH) has been demonstrated to be the primary source of the surface trap states on PbS QDs in the general oleic acid method, here, we present an effective and facile strategy for reducing the surface -OH content of PbS QDs by using acetonitrile (ACN) as precipitant to wash the surface of QDs, which significantly decreases the trap state density and enables the preparation of superior PbS QDs. The resulting solar cell with an ITO/SnO2/n-PbS/p-PbS/Au structure obtained an improved photoelectric conversion efficiency (PCE) from 8.53 to 10.49% with an enhanced air storage stability, realizing a high PCE for SnO2-based PbS QDSCs.

Nanocrystals as performance-boosting materials for solar cells

Nanocrystals (NCs) have been widely studied owing to their distinctive properties and promising application in new-generation photoelectric devices. In photovoltaic devices, semiconductor NCs can act as efficient light harvesters for high-performance solar cells. Besides light absorption, NCs have shown great significance as functional layers for charge (hole and electron) transport and interface modification to improve the power conversion efficiency and stability of solar cells. NC-based functional layers can boost hole/electron transport ability, adjust energy level alignment between a light absorbing layer and charge transport layer, broaden the absorption range of an active layer, enhance intrinsic stability, and reduce fabrication cost. In this review, recent advances in NCs as a hole transport layer, electron transport layer, and interfacial layer are discussed. Additionally, NC additives to improve the performance of solar cells are demonstrated. Finally, a summary and future prospects of NC-based functional materials in solar cells are presented, addressing their limitations and suggesting potential solutions.

Ligand Exchange of Quantum Dots: A Thermodynamic Perspective

Colloidal quantum dots (QDs) consist of an inorganic core and organic surface ligands. Surface ligands play a dominant role in maintaining the colloidal stability of QDs and passivating the surface defects of QDs. However, the original ligands introduced in the synthetic process of QDs cannot meet the requirements for diverse applications; therefore, ligand exchanges with functional ligands are mandatory. Understanding the ligand exchange process requires a comprehensive combination of the concepts and techniques of surface chemistry. In this Perspective, the ligand exchange process is discussed in detail. Specifically, we elaborate on the thermodynamics that can reveal the feasibility and mechanism of ligand exchange. It depicts a critical physical picture of the surface of QDs along with the following ligand exchange.

Short-Wave Infrared Detection and Imaging Employing Size-Customized HgTe Nanocrystals

HgTe nanocrystals (NCs) possess advantages including tunable infrared absorption spectra, solution processability, and low fabrication costs, offering new avenues for the advancement of next-generation infrared detectors. In spite of great synthetic advances, it remains essential to achieve customized synthesis of HgTe NCs in terms of industrial applications. Herein, by taking advantage of a high critical nucleation concentration of HgTe NCs, a continuous-dropwise (CD) synthetic approach that features the addition of the anion precursors in a feasible drop-by-drop fashion is demonstrated. The slow reaction dynamics enable size-customized synthesis of HgTe NCs with sharp band tails and wide absorption range fully covering the short- and mid-infrared regions. More importantly, the intrinsic advantages of CD process ensure high-uniformity and scale-up synthesis from batch to batch without compromising the excitonic features. The resultant HgTe nanocrystal photodetectors show a high room-temperature detectivity of 8.1 × 1011 Jones at 1.7 µm cutoff absorption edge. This CD approach verifies a robust method for controlled synthesis of HgTe NCs and might have important implications for scale-up synthesis of other nanocrystal materials.

Advances in Heterostructures for Optoelectronic Devices: Materials, Properties, Conduction Mechanisms, Device Applications

Atomically thin 2D transition metal dichalcogenides (TMDs) have recently been spotlighted for next-generation electronic and photoelectric device applications. TMD materials with high carrier mobility have superior electronic properties different from bulk semiconductor materials. 0D quantum dots (QDs) possess the ability to tune their bandgap by composition, diameter, and morphology, which allows for a control of their light absorbance and emission wavelength. However, QDs exhibit a low charge carrier mobility and the presence of surface trap states, making it difficult to apply them to electronic and optoelectronic devices. Accordingly, 0D/2D hybrid structures are considered as functional materials with complementary advantages that may not be realized with a single component. Such advantages allow them to be used as both transport and active layers in next-generation optoelectronic applications such as photodetectors, image sensors, solar cells, and light-emitting diodes. Here, recent discoveries related to multicomponent hybrid materials are highlighted. Research trends in electronic and optoelectronic devices based on hybrid heterogeneous materials are also introduced and the issues to be solved from the perspective of the materials and devices are discussed.

Facile Ligand Exchange of Ionic Ligand-Capped Amphiphilic Ag2S Nanocrystals for High Conductive Thin Films

A surface ligand modification of colloidal nanocrystals (NCs) is one of the crucial issues for their practical applications because of the highly insulating nature of native long-chain ligands. Herein, we present straightforward methods for phase transfer and ligand exchange of amphiphilic Ag2S NCs and the fabrication of highly conductive films. S-terminated Ag2S (S-Ag2S) NCs are capped with ionic octylammonium (OctAH+) ligands to compensate for surface anionic charge, S2-, of the NC core. An injection of polar solvent, formamide (FA), into S-Ag2S NCs dispersed in toluene leads to an additional envelopment of the charged S-Ag2S NC core by FA due to electrostatic stabilization, which allows its amphiphilic nature and results in a rapid and effective phase transfer without any ligand addition. Because the solvation by FA involves a dissociation equilibrium of the ionic OctAH+ ligands, controlling a concentration of OctAH+ enables this phase transfer to show reversibility. This underlying chemistry allows S-Ag2S NCs in FA to exhibit a complete ligand exchange to Na+ ligands. The S-Ag2S NCs with Na+ ligands show a close interparticle distance and compatibility for uniformly deposited thin films by a simple spin-coating method. In photoelectrochemical measurements with stacked Ag2S NCs on ITO electrodes, a 3-fold enhanced current response was observed for the ligand passivation of Na+ compared to OctAH+, indicating a significantly enhanced charge transport in the Ag2S NC film by a drastically reduced interparticle distance due to the Na+ ligands.

Effect of Connectivity on the Carrier Transport and Recombination Dynamics of Perovskite Quantum-Dot Networks

Quantum-dot (QD) solids are being widely exploited as a solution-processable technology to develop photovoltaic, light-emission, and photodetection devices. Charge transport in these materials is the result of a compromise between confinement at the individual QD level and electronic coupling among the different nanocrystals in the ensemble. While this is commonly achieved by ligand engineering in colloidal-based systems, ligand-free QD assemblies have recently emerged as an exciting alternative where nanostructures can be directly grown into porous matrices with optical quality as well as control over their connectivity and, hence, charge transport properties. In this context, we present a complete photophysical study comprising fluence- and temperature-dependent time-resolved spectroscopy to study carrier dynamics in ligand-free QD networks with gradually varying degrees of interconnectivity, which we achieve by changing the average distance between the QDs. Analysis of the photoluminescence and absorption properties of the QD assemblies, involving both static and time-resolved measurements, allows us to identify the weight of the different recombination mechanisms, both radiative and nonradiative, as a function of QD connectivity. We propose a picture where carrier diffusion, which is needed for any optoelectronic application and implies interparticle transport, gives rise to the exposure of carriers to a larger defect landscape than in the case of isolated QDs. The use of a broad range of fluences permits extracting valuable information for applications demanding either low- or high-carrier-injection levels and highlighting the relevance of a judicious design to balance recombination and diffusion.

Reducing the Open-Circuit Voltage Loss of PbS Quantum Dot Solar Cells via Hybrid Ligand Exchange Treatment

The interface VOC loss between the active layer and the hole transport layer (HTL) of lead sulfide colloidal quantum dot (PbS-CQD) solar cells is a significant factor influencing the efficiency improvement of PbS colloidal quantum dot solar cells (PbS-CQDSCs). Currently, the most advanced solar cells adopt organic P-type HTLs (PbS-EDT) via solid-state ligand exchange with 1,2-ethanedithiol (EDT) on the CQD top active layer. However, EDT is unable to altogether remove the initial ligand oleic acid from the quantum dot surface, and its high reactivity leads to cracks in the HTL film caused by volume contractions, which inevitably results in significant VOC loss. These flaws prompted this research to develop a method involving hybrid organic ligand exchange using 3-mercaptopropionic acid (MPA) and 1,2-EDT (PbS-Hybrid) to overcome these drawbacks of VOC loss. The results indicated that the new exchange strategy improved the quality of the HTL film and benefited from the enhanced passivation of the quantum dot surface and better alignment of energy levels, and the average VOC of PbS-Hybrid devices is increased by approximately 25 mV compared to control devices. With the enhanced VOC, the average power conversion efficiency (PCE) of the devices is improved by 10%, with the highest PCE reaching 13.24%.

Multiple Phase Regulation Enables Efficient and Bright Quasi-2D Perovskite Light-Emitting Diodes

Quasi-2D perovskites, multiquantum well materials with the energy cascade structure, exhibit impressive optoelectronic properties and a wide range of applications in various optoelectronic devices. However, the insufficient exciton energy transfer caused by the excess of small-n phases that induce nonradiative recombination and the spatially random phase distribution that impedes charge transport severely inhibit the device performance of light-emitting diodes (LEDs). Here, a faster energy transfer process and efficient carrier recombination are achieved by introducing the multifunctional additive 2-(methylsulfonyl)-4-(trifluoromethyl)benzoic acid (MTA) to manipulate the crystallization process of perovskites. The introduction of MTA not only constrains the PEA and restrains the formation of small-n phases to improve the energy transfer process but also optimizes the crystal orientation to promote charge transport. As a result, highly efficient pure green quasi-2D perovskite LEDs with a peak EQE of 25.9%, a peak current efficiency of 108.1 cd A-1, and a maximum luminance of 288798 cd m-2 are achieved.

A Thiol-Michael Approach Towards Versatile Functionalized Cyclic Titanium-Oxo Clusters

In expanding our research activities of superlattice engineering, designing new giant molecules is the necessary first step. One attempt is to use inorganic transition metal clusters as building blocks. Efficient functionalization of chemically precise transition metal clusters, however, remains a great challenge to material scientists. Herein, we report an efficient thiol-Michael addition approach for the modifications of cyclic titanium-oxo cluster (CTOC). Several advantages, including high efficiency, mild reaction condition, capability of complete addition, high atom economy, as well as high functional group tolerance were demonstrated. This approach can afford high yields of fully functionalized CTOCs, which provides a powerful platform for achieving versatile functionalization of precise transition metal clusters and further applications.

Interface-Mediation-Enabled High-Performance Near-Infrared AgAuSe Quantum Dot Light-Emitting Diodes

Near-infrared (NIR) quantum dot (QD) light-emitting diodes (LEDs) (NIR-QLEDs) for recognition and tracking applications underpin the future of night-vision technology. However, the performance of environmentally benign materials and devices has lagged far behind that of their Pb-containing counterparts. In this study, we demonstrate the superior performance of NIR-QLEDs based on efficient AgAuSe QDs with contact interface mediation. Consequently, we reveal that using cysteamine-treated QD film contact heterointerfaces can effectively eliminate contact defects in devices and preserve their excellent emissive properties. Additionally, the dipole moment orientation of the coordinated additives is inverse of the heterojunction potential difference, simultaneously blocking electrons and enhancing hole injection in operando, optimizing the LED charge injection balance. These devices exhibit a high external quantum efficiency (EQE) and a power conversion efficiency (PCE) of 15.8 and 12.7% at 1046 nm, respectively, a sub-band gap turn-on voltage of 0.9 V, and a low current density (over 10% of the EQE from 0.0017 to 0.31 mA cm-2). These are the highest EQE and PCE values ever reported for environmentally benign NIR-QLEDs. The results of this study can provide a general strategy for the practical application of QDs in electroluminescent devices.

Ligand-mediated electron transport channels enhance photocatalytic activity of plasmonic nanoparticles

Photoexcitation of noble metal nanoparticles creates surface plasmons which further decay to form energetic charge carriers. These charge carriers can initiate and/or accelerate various chemical processes at nanoparticle surfaces, although the efficiency of such processes remains low as a large fraction of these carriers recombine before they can reach the reaction sites. Thus efficient utilization of these charge carriers requires designing nanostructures that promote the separation of charges and their transport toward the reaction sites. Here we demonstrate that covalently bound surface-coating ligands with suitable orbital alignment can provide electron transport channels boosting hot electron extraction from a gold nanostructure leading to a huge enhancement in the rate of hydrogen evolution reaction (HER) under NIR excitation. A (p)Br-Ph-SH substituted gold nanoprism (AuTP) substrate produced ∼4500 fold more hydrogen compared to a pristine AuTP substrate under 808 nm excitation. Further experimental and theoretical studies on a series of substituted benzene-thiol bound AuTP substrates showed that the extent of the ligand-mediated HER enhancement depends not only on the polarity of the ligand but on the interfacial orbitals interactions.

Quantum-Tuned Cascade Multijunction Infrared Photodetector

Emerging applications such as augmented reality, self-driving vehicles, and quantum information technology require optoelectronic devices capable of sensing a low number of photons with high sensitivity (including gain) and high speed and that could operate in the infrared at telecom windows beyond silicon's bandgap. State-of-the-art semiconductors achieve some of these functions through costly and not easily scalable doping and epitaxial growing methods. Colloidal quantum dots (QDs), on the other hand, could be easily tuned and are compatible with consumer electronics manufacturing. However, the development of a QD infrared photodetector with high gain and high response speed remains a challenge. Herein, we present a QD monolithic multijunction cascade photodetector that advances in the speed-sensitivity-gain space through precise control over doping and bandgap. We achieved this by implementing a QD stack in which each layer is tailored via bandgap tuning and electrostatic surface manipulation. The resulting junctions sustain enhanced local electric fields, which, upon illumination, facilitate charge tunneling, recirculation, and gain, but retain low dark currents in the absence of light. Using this platform, we demonstrate an infrared photodetector sensitive up to 1500 nm, with a specific detectivity of ∼3.7 × 1012 Jones, a 3 dB bandwidth of 300 kHz (0.05 cm2 device), and a gain of ∼70× at 1300 nm, leading to an overall gain-bandwidth product over 20 MHz, in comparison with 3 kHz of standard photodiode devices of similar areas.

Nonclassical Mechanism of Metal-Enhanced Photoluminescence of Quantum Dots

Metal-enhanced photoluminescence is able to provide a robust signal even from a single emitter and is promising in applications in biosensors and optoelectronic devices. However, its realization with semiconductor nanocrystals (e.g., quantum dots, QDs) is not always straightforward due to the hidden and not fully described interactions between plasmonic nanoparticles and an emitter. Here, we demonstrate nonclassical enhancement (i.e., not a conventional electromagnetic mechanism) of the QD photoluminescence at nonplasmonic conditions and correlate it with the charge exchange processes in the system, particularly with high efficiency of the hot-hole generation in gold nanoparticles and the possibility of their transfer to QDs. The hole injection returns a QD from a charged nonemitting state caused by hole trapping by surface and/or interfacial traps into an uncharged emitting state, which leads to an increased photoluminescence intensity. These results open new insights into metal-enhanced photoluminescence, showing the importance of the QD surface states in this process.

The interface microenvironment mediates the emission of a semiconductor nanocluster via surface-dopant-involving direct charge transfer

The interface microenvironment of doped quantum dots (QDs) is crucial in optimizing the properties associated with the photogenerated excitons. However, the imprecision of QDs' surface structures and compositions impedes a thorough understanding of the modulation mechanism caused by the complex interface microenvironment, particularly distinguishing the contribution of surface dopants from inner ones. Herein, we investigated interface-mediated emission using a unique model of an atomically precise chalcogenide semiconductor nanocluster containing uniform near-surface Mn2+ dopants. Significantly, we discovered that Mn2+ ions can directly transfer charges with hydrogen-bonding-bound electron-rich alkylamines with matched molecular configurations and electronic structures at the interface. This work provides a new pathway, the use of atomically precise nanoclusters, for analyzing and enhancing the interface-dependent properties of various doped QDs, including chalcogenides and perovskites.

Probing three-dimensional mesoscopic interfacial structures in a single view using multibeam X-ray coherent surface scattering and holography imaging

Visualizing surface-supported and buried planar mesoscale structures, such as nanoelectronics, ultrathin-film quantum dots, photovoltaics, and heterogeneous catalysts, often requires high-resolution X-ray imaging and scattering. Here, we discovered that multibeam scattering in grazing-incident reflection geometry is sensitive to three-dimensional (3D) structures in a single view, which is difficult in conventional scattering or imaging approaches. We developed a 3D finite-element-based multibeam-scattering analysis to decode the heterogeneous electric-field distribution and to faithfully reproduce the complex scattering and surface features. This approach further leads to the demonstration of hard-X-ray Lloyd's mirror interference of scattering waves, resembling dark-field, high-contrast surface holography under the grazing-angle scattering conditions. A first-principles calculation of the single-view holographic images resolves the surface patterns' 3D morphology with nanometer resolutions, which is critical for ultrafine nanocircuit metrology. The holographic method and simulations pave the way for single-shot structural characterization for visualizing irreversible and morphology-transforming physical and chemical processes in situ or operando.

Dipolar Ligands Tune Plasmonic Properties of Tin-Doped Indium Oxide Nanocrystals

Surface functionalization with dipolar molecules is known to tune the electronic band alignment in semiconductor films and colloidal quantum dots. Yet, the influence of surface modification on plasmonic nanocrystals and their properties remains little explored. Here, we functionalize tin-doped indium oxide nanocrystals (ITO NCs) via ligand exchange with a series of cinnamic acids with different electron-withdrawing and -donating dipolar characters. Consistent with previous reports on semiconductors, we find that withdrawing (donating) ligands increase (decrease) the work function caused by an electrostatic potential shift across the molecular layer. Quantitative analyses of the plasmonic extinction spectra reveal that varying the ligand molecular dipole affects the near-surface depletion layer, with an anticorrelated trend between the electron concentration and electronic volume fraction, factors that are positively correlated in as-synthesized NCs. Electronic structure engineering through surface modification provides access to distinctive combinations of plasmonic properties that could enable optoelectronic applications, sensing, and hot electron-driven processes.

Colloidal Ag2Se intraband quantum dots

With the emergence of the Internet of Things, wearable electronics, and machine vision, the exponentially growing demands for miniaturization, energy efficiency, and cost-effectiveness have imposed critical requirements on the size, weight, power consumption and cost (SWaP-C) of infrared detectors. To meet this demand, new sensor technologies that can reduce the fabrication cost associated with semiconductor epitaxy and remove the stringent requirement for cryogenic cooling are under active investigation. In the technologically important spectral region of mid-wavelength infrared, intraband colloidal quantum dots are currently at the forefront of this endeavor, with wafer-scale monolithic integration and Auger suppression being the key material capabilities to minimize the sensor's SWaP-C. In this Feature Article, we provide a focused review on the development of sensors based on Ag2Se intraband colloidal quantum dots, a heavy metal-free colloidal nanomaterial that has merits for wide-scale adoption in consumer and industrial sectors.

Exploring Configurations of Nanocrystal Ligands Using Machine-Learned Force Fields

Semiconducting nanocrystals passivated with organic ligands have emerged as a powerful platform for light harvesting, light-driven chemical reactions, and sensing. Due to their complexity and size, little structural information is available from experiments, making these systems challenging to model computationally. Here, we develop a machine-learned force field trained on DFT data and use it to investigate the surface chemistry of a PbS nanocrystal interfaced with acetate ligands. In doing so, we go beyond considering individual local minimum energy geometries and, importantly, circumvent a precarious issue associated with the assumption of a single assigned atomic partial charge for each element in a nanocrystal, independent of its structural position. We demonstrate that the carboxylate ligands passivate the metal-rich surfaces by adopting a very wide range of "tilted-bridge" and "bridge" geometries and investigate the corresponding ligand IR spectrum. This work illustrates the potential of machine-learned force fields to transform computational modeling of these materials.