MoS2 quantum dot-interspersed exfoliated MoS2 nanosheets

Selective SERS Sensing of R6G Molecules Using MoS2 Nanoflowers under Pressure

Pressure-induced surface-enhanced Raman spectroscopy (PI-SERS) has garnered significant attention as a subfield of SERS detection due to its capacity to regulate the band gap between molecules and substrates through pressure modulation. Currently, SERS detection primarily focuses on single molecules at atmospheric pressure with limited investigations conducted under high pressure conditions. Herein, we employed rose-shaped MoS2 nanoflowers as the SERS substrate and realized selective PI-SERS enhancement of R6G molecules in the binary (MV+R6G) and ternary (MV+R6G+RhB) systems. The MoS2 demonstrated an exceptionally low SERS detection limit of 5 × 10-6 M in binary and ternary systems with equimolar amounts of molecules. High-pressure experimental results indicate that MoS2 displays selective enhancement for R6G molecules, as evidenced by the comparison of the PI-SERS peak intensity ratio between MoS2 and the probe molecules. The proposed enhancement mechanism in binary and ternary SERS systems under high pressure involves pressure-induced changes in both the band structures of the MoS2 substrate and molecules, thereby influencing their charge transfer dynamics. Consequently, this approach holds great promise for practical applications in complex SERS systems operating under extreme conditions.

Soluble inorganic quantum dots as an electrolyte additive to boost lithium-sulfur battery performance

Herein, MoS2 quantum dots (QDs) are constructed to serve as electrolyte additives for lithium-sulfur batteries, which can 'solidify' soluble polysulfides by chemisorption and promote sulfur conversion chemistry by electrocatalysis. The Li-S cell with MoS2 QDs shows high retained capacity and high-rate capability, much better than the counterpart without MoS2 QDs.

Molybdenum disulfide quantum dots for rapid fluorescence detection of glutathione and ascorbic acid

A method for the specific detection of glutathione (GSH) and ascorbic acid (AA) using 3-aminophenylboronic acid functionalized molybdenum disulfide quantum dots (APBA-MoS2 QDs) was reported. The APBA-MoS2 QDs synthesized using the hydrothermal method showed the strongest fluorescence intensity at an emission wavelength of 375 nm with the optimum excitation wavelength of 320 nm. The detection method was constructed by the combination of the dynamic and static quenching and the inner filter effect (IFE) of APBA-MoS2 QDs by permanganate (MnO4-) and the rapid redox reaction (1 min) of MnO4- by GSH or AA. The concentrations of GSH and AA showed good linear ranges of 10-500 μM and 10-100 μM, respectively, with limits of detection (LOD) of 0.476 μM and 0.185 μM, respectively. The spiked recovery tests in human serum and fresh fruit samples showed that APBA-MoS2 QDs had significant potential in the construction of fluorescent biological detection methods.

Recent Advances on Two-Dimensional Nanomaterials Supported Single-Atom for Hydrogen Evolution Electrocatalysts

Water electrolysis has been recognized as a promising technology that can convert renewable energy into hydrogen for storage and utilization. The superior activity and low cost of catalysis are key factors in promoting the industrialization of water electrolysis. Single-atom catalysts (SACs) have attracted attention due to their ultra-high atomic utilization, clear structure, and highest hydrogen evolution reaction (HER) performance. In addition, the performance and stability of single-atom (SA) substrates are crucial, and various two-dimensional (2D) nanomaterial supports have become promising foundations for SA due to their unique exposed surfaces, diverse elemental compositions, and flexible electronic structures, to drive single atoms to reach performance limits. The SA supported by 2D nanomaterials exhibits various electronic interactions and synergistic effects, all of which need to be comprehensively summarized. This article aims to organize and discuss the progress of 2D nanomaterial single-atom supports in enhancing HER, including common and widely used synthesis methods, advanced characterization techniques, different types of 2D supports, and the correlation between structural hydrogen evolution performance. Finally, the latest understanding of 2D nanomaterial supports was proposed.

Sustainable, aqueous exfoliation of MoS2via bio-inspired avenues

Two dimensional (2D) nanosheets of MoS2 were succesfully produced by an exfoliation process in aqueous media with the support from peptides and sonication. The exfoliation process assisted by uncapped MoSBP1 peptides was found to have enhanced efficiency in comparison to the capped counterpart. MoS2 nanosheets obtained using uncapped MoSBP1 have thinner structures containing one layer of MoS2, while in capped version of peptides, MoS2 nanosheets tend to form multilayer (up to 4) structures of exfoliated sheets. Molecular dynamics simulations indicate that inter-sheet gaps generated by sonication in MoS2 nanostacks cannot be maintained by water only; the gaps closed after ∼11 ns. Both capped CMoSBP1 and uncapped MoSBP1 were seen to spontaneously insert into the gap in nanostacks of MoS2 and they can ultimately maintain the inter-sheet gap for longer (≥20 ns). Potential of mean force profiles for the association of two MoS2 nanosheets decorated with CMoSBP1 and MoSBP1 versions of peptides revealed that uncapped MoSBP1 peptides provide good protection from MoS2 nanosheet re-unification. Such protection can prevent the nanosheets from reassociation and subsequent aggregation, whereas the capped CMoSBP1 peptides can offer protection, but over a shorter range. These simulation results could explain the experimental observation of greater efficiency of exfoliation in uncapped MoSBP1 peptides.

Confinement of excited states in two-dimensional, in-plane, quantum heterostructures

Two-dimensional (2D) semiconductors are promising candidates for optoelectronic application and quantum information processes due to their inherent out-of-plane 2D confinement. In addition, they offer the possibility of achieving low-dimensional in-plane exciton confinement, similar to zero-dimensional quantum dots, with intriguing optical and electronic properties via strain or composition engineering. However, realizing such laterally confined 2D monolayers and systematically controlling size-dependent optical properties remain significant challenges. Here, we report the observation of lateral confinement of excitons in epitaxially grown in-plane MoSe2 quantum dots (~15-60 nm wide) inside a continuous matrix of WSe2 monolayer film via a sequential epitaxial growth process. Various optical spectroscopy techniques reveal the size-dependent exciton confinement in the MoSe2 monolayer quantum dots with exciton blue shift (12-40 meV) at a low temperature as compared to continuous monolayer MoSe2. Finally, single-photon emission (g2(0) ~ 0.4) was also observed from the smallest dots at 1.6 K. Our study opens the door to compositionally engineered, tunable, in-plane quantum light sources in 2D semiconductors.

Facile and Scalable Colloidal Synthesis of Transition Metal Dichalcogenide Nanoparticles with High-Performance Hydrogen Production

Transition metal dichalcogenides (TMDs) have garnered significant attention as efficient electrocatalysts for the hydrogen evolution reaction (HER) due to their high activity, stability, and cost-effectiveness. However, the development of a convenient and economical approach for large-scale HER applications remains a persistent challenge. In this study, we present the successful synthesis of TMD nanoparticles (including MoS2, RuS2, ReS2, MoSe2, RuSe2, and ReSe2) using a general colloidal method at room temperature. Notably, the ReSe2 nanoparticles synthesized in this study exhibit superior HER performance compared with previously reported nanostructured TMDs. Importantly, the synthesis of these TMD nanoparticles can readily be scaled up to gram quantities while preserving their exceptional HER performance. These findings highlight the potential of colloidal synthesis as a versatile and scalable approach for producing TMD nanomaterials with outstanding electrocatalytic properties for water splitting.

Amphi-Luminescent MoS2 nanostructure for photocatalytic splitting of water and removal of Methylene Blue

Chemical dyes used in the textile industries are one of the major pollutants in water. Methylene blue (MB) is a commonly seen dye that creates hazardous health problems. In this article the photocatalytic degradation of MB by the nanocatalyst MoS2 (Nano-MoS2) and carbon dot (C Dots) incorporated MoS2 (Nano-CD-MoS2) is reported. The photocatalytic degradation of MB is analyzed based on the electron-hole recombination rate of the catalyst. Photoluminescence emission exhibited by the catalyst is used as a key indicator to probe the electron-hole recombination rate. Nano-MoS2 was synthesized hydrothermally at 180 0C for 8 h from ammonium tetra thiomolybdate (ATTM). C Dot was prepared following a green root from ash guard extract which later mixed with Nano-MoS2 and kept in an autoclave at a temperature 140 °C for 4 h to get Nano-CD-MoS2. The photoluminescence (PL) and photocatalytic behavior of Nano-MoS2 and Nano-CD-MoS2 and their application for water splitting and water purification are reported. The incorporation of graphene and artificial C Dot into MoS2 nanostructures are reported to increase the conductivity and active edge sites of MoS2 that enhances the photocatalytic action. Since green C Dots are eco-friendly and easily synthesizable than artificial C Dots, as a novel study, this article investigated the influence of green C Dots on the PL and photocatalytic performance of nanosized MoS2. Nano-MoS2 and Nano-CD-MoS2 exhibited both upconversion and downconversion PL; accordingly the nanostructures were termed as amphi-luminescent. The amphi-luminescence property widens the photon absorption range and hence enhances the catalytic degradation of dyes. Nano-MoS2 which exhibited lesser intensity of amphi-luminescence emission compared to Nano-CD-MoS2 showed better results in degradation of MB. C Dots may bind with the valence band electrons of MoS2, resulting in the reduction of dangling bonds. Dangling bonds can trap photo-induced excitons to hinder the rate of electron-hole recombination. So, fast electron-hole recombination occurs in Nano-CD-MoS2 than Nano-MoS2. Fast electron-hole recombination supports radiative electron-hole recombination while suppresses the non-radiative energy transfer of electrons and causes high PL intensity. However, according to the energy level diagram, Nano-MoS2 with minimal electron-hole recombination rate is more favorable for O2/O2-,.OH/ OH- and.OH/H2O reactions that facilitate MB degradation. Photocatalytic activity of catalysts were confirmed by measuring the photocurrent from a simple custom-made two-electrode water photolysis cell where the nanocatalysts were dispersed in electrolyte. Lead and steel rods were used as electrodes. Multimeter was used to measure current. Nano-MoS2 exhibited better performance with a maximum photocurrent of 141 µA. Influence of green C Dots in energy levels, PL and photocatalysis of MoS2 and mechanisms of PL and degradation of MB are thoroughly investigated in this article.

Mixed-Dimensional van der Waals Heterostructure (2D ReS2/0D MoS2 Quantum Dots)-Based Broad Spectral Range with Ultrahigh-Responsive Photodetector

The remarkable properties of two-dimensional (2D) materials have led to significant advancements in photodetection and optoelectronics research. Currently, there are many successful methods that are employed to improve the responsivity of photodetectors, but the limited spectral range of the device remains a limitation. This work demonstrates the development of a mixed-dimensional (2D/0D) hybrid photodetector device fabricated using chemical vapor deposition (CVD)-grown monolayer ReS2 and solution-processed MoS2 quantum dots (QDs). The mixed dimensionality of 2D (ReS2) and zero-dimensional (0D) MoS2 QDs assist in improving the spectral range of the device [ultraviolet (360 nm) to near-infrared (780 nm)]. Further, due to the work function difference between ReS2 and MoS2 QDs, the built-in electric field across the mixed-dimensional interface promotes effective charge separation and migration, resulting in improved responsivities of the device. The calculated responsivities of the fabricated photodetector are 5.4 × 102, 3.3 × 102, and 2.6 × 102 A/W when subjected to visible, UV, and NIR light illumination, which is remarkable when compared to the existing reports on broadband photodetection. The mixed-dimensionality heterostructure coupled with contact engineering paves the way for highly responsive broadband photodetectors for potential applications in security, healthcare, etc.

Simultaneously Regulated Highly Polarized and Long-Lived Valley Excitons in WSe2/GaN Heterostructures

Interlayer excitons, with prolonged lifetimes and tunability, hold potential for advanced optoelectronics. Previous research on the interlayer excitons has been dominated by two-dimensional heterostructures. Here, we construct WSe2/GaN composite heterostructures, in which the doping concentration of GaN and the twist angle of bilayer WSe2 are employed as two ingredients for the manipulation of exciton behaviors and polarizations. The exciton energies in monolayer WSe2/GaN can be regulated continuously by the doping levels of the GaN substrate, and a remarkable increase in the valley polarizations is achieved. Especially in a heterostructure with 4°-twisted bilayer WSe2, a maximum polarization of 38.9% with a long lifetime is achieved for the interlayer exciton. Theoretical calculations reveal that the large polarization and long lifetime are attributed to the high exciton binding energy and large spin flipping energy during depolarization in bilayer WSe2/GaN. This work introduces a distinctive member of the interlayer exciton with a high degree of polarization and a long lifetime.

Unveiling the antibacterial strategies and mechanisms of MoS2: a comprehensive analysis and future directions

Antibiotic resistance is a growing problem that requires alternative antibacterial agents. MoS2, a two-dimensional transition metal sulfide, has gained significant attention in recent years due to its exceptional photocatalytic performance, excellent infrared photothermal effect, and impressive antibacterial properties. This review presents a detailed analysis of the antibacterial strategies and mechanism of MoS2, starting with its morphology and synthesis methods and focusing on the different interaction stages between MoS2 and bacteria. The paper summarizes the main antibacterial mechanisms of MoS2, such as photocatalytic antibacterial, enzyme-like catalytic antibacterial, physical antibacterial, and photothermal-assisted antibacterial. It offers a comprehensive discussion focus on recent research studies of photocatalytic antibacterial mechanisms and categorizes them, guiding the application of MoS2 in the antibacterial field. Overall, the review provides an in-depth understanding of the antibacterial mechanisms of MoS2 and presents the challenges and future directions for the improvement of MoS2 in the field of high-efficiency antibacterial materials.

Recent progress in MoS2 nanostructures for biomedical applications: Experimental and computational approach

In the category of 2D materials, MoS2 a transition metal dichalcogenide, is a novel and intriguing class of materials with interesting physicochemical properties, explored in applications ranging from cutting-edge optoelectronic to the frontiers of biomedical and biotechnology. MoS2 nanostructures an alternative to heavy toxic metals exhibit biocompatibility, low toxicity and high stability, and high binding affinity to biomolecules. MoS2 nanostructures provide a lot of opportunities for the advancement of novel biosensing, nanodrug delivery system, electrochemical detection, bioimaging, and photothermal therapy. Much efforts have been made in recent years to improve their physiochemical properties by developing a better synthesis approach, surface functionalization, and biocompatibility for their safe use in the advancement of biomedical applications. The understanding of parameters involved during the development of nanostructures for their safe utilization in biomedical applications has been discussed. Computational studies are included in this article to understand better the properties of MoS2 and the mechanism involved in their interaction with biomolecules. As a result, we anticipate that this combined experimental and computational studies of MoS2 will inspire the development of nanostructures with smart drug delivery systems, and add value to the understanding of two-dimensional smart nano-carriers.

Carbon-coated selenium nanoparticles for photothermal therapy in choriocarcinoma cells

Choriocarcinoma can be cured by chemotherapy, but this causes resistance and severe side effects that bring about physical and psychological consequences for patients. Therefore, there is still an urgent need to find other alternative minimally invasive therapies to halt the progression of choriocarcinoma. Novel carbon-coated selenium nanoparticles (C-Se) were successfully synthesized for choriocarcinoma photothermal therapy. C-Se combined with near-infrared laser irradiation can inhibit the proliferation of human choriocarcinoma (JEG-3) cells and induce cell apoptosis. C-Se killed cells and produced ROS under near-infrared laser irradiation. Finally, the therapeutic mechanism of C-Se + laser was explored showing that C-Se + laser influenced numerous biological processes. Taken together, C-Se exhibited significant potential for choriocarcinoma photothermal therapy.

Liquid phase exfoliation of MoSe2: Effect of solvent on morphology, edge confinement, bandgap and number of layers study

In this study, a facile and scalable method for synthesizing MoSe2 nanomaterial via a sonication-assisted liquid-phase exfoliation method is proposed. This study shows the successful synthesis of few-layered MoSe2 in various solvents including DI water, ethanol, N-Methyl-2-pyrrolidone (NMP), Dimethylformamide (DMF) and Dimethylsulfoxide (DMSO). The exfoliated nanosheets have remarkably different properties than bulk MoSe2 which were studied using Field emission scanning electron microscopy, Fourier-transform infrared spectroscopy, X-ray diffraction and UV-Vis spectroscopy to investigate their morphology, functional groups, structure and optical properties, respectively. The mean values of the number of layers from an optical extinction spectrum based on the effect of edge and quantum confinement were also calculated. Moreover, the exfoliated material using this method has potential application in energy storage as demonstrated by the electrochemical performance of the bulk and exfoliated materials.•Successful synthesis of the few-layer MoSe2 from bulk MoSe2 using liquid phase exfoliation method in various solvents•The investigation of the effect of solvent on the number of layers and optical properties of MoSe2.

Facile synthesis of wide bandgap ZrS2 colloidal quantum dots for solution processed solar-blind UV photodetectors

We present a facile one-pot method for the successful synthesis of heavy metal-free ZrS2 colloidal quantum dots (QDs) with a wide bandgap. To achieve this, we employed 1-dodecanethiol (DT) as a sulfur precursor, enabling the controlled release of H2S in situ during the reaction at temperatures exceeding 195 °C. This approach facilitated the synthesis of small-sized ZrS2 QDs with precise control.

Metallic CrP2 monolayer: potential applications in energy storage and conversion

Phosphorus-rich compounds have emerged as a promising class of energy storage and conversion materials due to their interesting structures and electrochemical properties. Herein, we propose that a metallic CrP2 monolayer, isomorphic to 1H-phase MoS2, is a good prospect as an anode for K-ion batteries and a catalyst for hydrogen evolution through first-principles calculations. The CrP2 monolayer demonstrates not only a desirable high K storage capacity (940 mA h g-1) but also a low K-ion diffusion barrier (0.10 eV) and average open circuit voltage (0.40 V). On the other hand, its Gibbs free energy (0.02 eV)/active site density is superior/comparable to that of commercial Pt, resulting from the contribution of the lone pair electrons of the P atom. Its high structural stability and intrinsic metallicity can ensure high safety and performance during the cyclic process. These interesting properties make the CrP2 monolayer a promising multifunctional material for energy storage and conversion devices.

Quantum dots derived from two-dimensional transition metal dichalcogenides: synthesis, optical properties and optoelectronic applications

Zero-dimensional transition metal dichalcogenides (TMD) quantum dots (QDs) have attracted a lot of attention due to their interesting fundamental properties and various applications. Compared to TMD monolayers, the QD counterpart exhibits larger values for direct transition energies, exciton binding energies, absorption coefficient, luminescence efficiency, and specific surface area. These characteristics make them useful in optoelectronic devices. In this review, recent exciting progress on synthesis, optical properties, and applications of TMD QDs is highlighted. The first part of this article begins with a brief description of the synthesis approaches, which focus on microwave-assistant heating and pulsed laser ablation methods. The second part introduces the fundamental optical properties of TMD QDs, including quantum confinement in optical absorption, excitation-wavelength-dependent photoluminescence, and many-body effects. These properties are highlighted. In the third part, we discuss lastest advancements in optoelectronic devices based on TMD QDs These devices include light-emitting diodes, solar cells, photodetectors, optical sensors, and light-controlled memory devices. Finally, a brief summary and outlook will be provided.

Molybdenum Disulfide as Tunable Electrochemical and Optical Biosensing Platforms for Cancer Biomarker Detection: A Review

Cancer is a common illness with a high mortality. Compared with traditional technologies, biomarker detection, with its low cost and simple operation, has a higher sensitivity and faster speed in the early screening and prognosis of cancer. Therefore, extensive research has focused on the development of biosensors and the construction of sensing interfaces. Molybdenum disulfide (MoS2) is a promising two-dimensional (2D) nanomaterial, whose unique adjustable bandgap shows excellent electronic and optical properties in the construction of biosensor interfaces. It not only has the advantages of a high catalytic activity and low manufacturing costs, but it can also further expand the application of hybrid structures through different functionalization, and it is widely used in various biosensors fields. Herein, we provide a detailed introduction to the structure and synthesis methods of MoS2, and explore the unique properties and advantages/disadvantages exhibited by different structures. Specifically, we focus on the excellent properties and application performance of MoS2 and its composite structures, and discuss the widespread application of MoS2 in cancer biomarkers detection from both electrochemical and optical dimensions. Additionally, with the cross development of emerging technologies, we have also expanded the application of other emerging sensors based on MoS2 for early cancer diagnosis. Finally, we summarized the challenges and prospects of MoS2 in the synthesis, functionalization of composite groups, and applications, and provided some insights into the potential applications of these emerging nanomaterials in a wider range of fields.

Rapid and ratiometric fluorescent detection of hypochlorite by glutathione functionalized molybdenum disulfide quantum dots

We proposed a rapid and ratiometric fluorescent detection method for hypochlorite by glutathione functionalized molybdenum disulfide quantum dots (G-MoS₂ QDs). The G-MoS₂ QDs were obtained through a hydrothermal method and the maximum fluorescence intensity was obtained at 430 nm under excitation of 360 nm. The fluorescence of G-MoS₂ QDs at 430 nm can be weakened by curcumin through the inner filter effect, meanwhile the fluorescence of curcumin at 540 nm appeared. Hypochlorite can fast oxidize curcumin and weaken the inner filter effect, thus the fluorescence of curcumin at 540 nm decreased and the fluorescence of G-MoS₂ QDs at 430 nm increased. This process takes only 30 s at room temperature. This is the rationale behind our rapid ratiometric fluorescent detection model for hypochlorite. Two linear detection ranges for hypochlorite are obtained with concentration from 1 to 20 μM and 20 to 30 μM, the limit of detection (LOD) was 11.5 nM. The standard spike recovery tests on milk and tap water samples showed satisfactory results, which extended the application of G-MoS₂ QDs in the field of ratiometric fluorescence detection assays.

Hydrothermal Synthesis of Molybdenum Disulfide Quantum Dots for Highly Sensitive Detection of Iron Ions in Protein Succinate Oral Solution

In this paper, a molybdenum disulfide fluorescent probe with an Fe³⁺ fluorescent system was first synthesized by the hydrothermal method for the detection of iron ion concentration in oral solution of protein succinate. It was characterized by infrared, fluorescence, X-ray photoelectron spectroscopy, scanning electron microscopy, and transmission electron microscopy. The probes were found to have good stability, photobleaching, and storage stability. The effects of dilution, pH, reaction time, and iron ion concentration on the fluorescent system were also investigated. The relative fluorescence intensity [(I₀ - I)/I₀] showed a good linear relationship with the iron ion concentration in the range of 0-50 μM, with the linear equation [(I₀ - I)/I₀] = 0.0148[Fe³⁺] + 0.0833 (r² = 0.9943, n = 11) and the detection limit of 2.43 μM. The reaction mechanism was also explored, as well as its ion selectivity, reversibility, accuracy, precision, and concentration of Fe ions in the actual sample. It was found that the probe can selectively detect Fe ions with a certain degree of reversibility, accuracy, precision, and ideal recovery, and it can be used for the determination of Fe³⁺ in proteosuccinic acid oral solution.

Microenvironment Restruction of Emerging 2D Materials and their Roles in Therapeutic and Diagnostic Nano-Bio-Platforms

Engineering advanced therapeutic and diagnostic nano-bio-platforms (NBPFs) have emerged as rapidly-developed pathways against a wide range of challenges in antitumor, antipathogen, tissue regeneration, bioimaging, and biosensing applications. Emerged 2D materials have attracted extensive scientific interest as fundamental building blocks or nanostructures among material scientists, chemists, biologists, and doctors due to their advantageous physicochemical and biological properties. This timely review provides a comprehensive summary of creating advanced NBPFs via emerging 2D materials (2D-NBPFs) with unique insights into the corresponding molecularly restructured microenvironments and biofunctionalities. First, it is focused on an up-to-date overview of the synthetic strategies for designing 2D-NBPFs with a cross-comparison of their advantages and disadvantages. After that, the recent key achievements are summarized in tuning the biofunctionalities of 2D-NBPFs via molecularly programmed microenvironments, including physiological stability, biocompatibility, bio-adhesiveness, specific binding to pathogens, broad-spectrum pathogen inhibitors, stimuli-responsive systems, and enzyme-mimetics. Moreover, the representative therapeutic and diagnostic applications of 2D-NBPFs are also discussed with detailed disclosure of their critical design principles and parameters. Finally, current challenges and future research directions are also discussed. Overall, this review will provide cutting-edge and multidisciplinary guidance for accelerating future developments and therapeutic/diagnostic applications of 2D-NBPFs.

Massively synthesizable nickel-doped 1T-MoS2 nanosheet catalyst as an efficient tri-functional catalyst

In this study, a nickel (Ni)-doped 1T-MoS₂ catalyst, an efficient tri-functional hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and oxygen reduction reaction (ORR) catalyst, was massively synthesized at high pressure (over 15 bar). The morphology, crystal structure, and chemical and optical properties of the Ni-doped 1T-MoS₂ nanosheet catalyst were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and ring rotating disk electrodes (RRDE), and the OER/ORR properties were characterized using lithium-air cells. Our results confirmed that highly pure, uniform, monolayer Ni-doped 1T-MoS₂ can be successfully prepared. The as-prepared catalysts exhibited excellent electrocatalytic activity for OER, HER, and ORR owing to the enhanced basal plane activity of Ni doping and formidable active edge sites resulting from the phase transition to a highly crystalline 1T structure from 2H and amorphous MoS₂. Therefore, our study provides a massive and straightforward strategy to produce tri-functional catalysts.

A facile strategy of using MoS2 quantum dots for fluorescence-based targeted detection of nitrobenzene

We present a simple approach for producing photoluminescent MoS₂ quantum dots (QDs) using commercial MoS₂ powder as a precursor along with NaOH and isopropanol. The synthesis method is particularly easy and environmentally friendly. The successful intercalation of Na⁺ ions into MoS₂ layers and subsequent oxidative cutting reaction leads to the formation of luminescent MoS₂ QDs. The present work, for the first time, shows the formation of MoS₂ QDs without any additional energy source. The as-synthesized MoS₂ QDs were characterized using microscopy and spectroscopy. The QDs have a few layer thicknesses and a narrow size distribution with an average diameter of ∼3.8 nm. Nitrobenzene (NB), an industrial chemical, is both toxic to human health and dangerously explosive. The present MoS₂ QDs can be used as an effective photoluminescent probe, and a new turn-off sensor for NB detection. The selective quenching was operated via multiple mechanisms; electron transfer between the nitro group and MoS₂ QDs through dynamic quenching and the primary inner filter effect (IFE). The quenching has a linear relationship with NB concentrations from 0.5 μM to 11 μM, with a calculated detection limit of 50 nM.

Partially oxidized MoS2 nanosheets with high water-solubility to enhance the peroxidase-mimic activity for sensitive detection of glutathione

Surface oxidation engineering is an effective strategy to construct nanomaterials with enhanced biocatalytic activity. In this study, a facile one-pot oxidation strategy was proposed to synthesize partially oxidized molybdenum disulfide nanosheets (ox-MoS₂ NSs), which exhibit good water solubility and can be used as an excellent peroxidase substitute. Under the oxidation process, Mo-S bonds are partially broke and S atoms are replaced by excess oxygen atoms, and the released abundant heat and gases efficiently expended the interlayer distance and weaken the van der Waals forces between adjacent layers. Porous ox-MoS₂ NSs can be easily exfoliated by further sonication, and the nanosheets exhibits excellent water dispersibility and no obvious sediment appear even after store for months. Benefiting from the desirable affinity property with enzyme substrates, optimized electronic structure and prominent electron transfer efficiency, the ox-MoS₂ NSs exhibit enhanced peroxidase-mimic activity. Furthermore, the ox-MoS₂ NSs catalyzed 3,3',5,5'-tetramethylbenzidine (TMB) oxidation reaction could be inhibited by the redox reaction that take place between glutathione (GSH) as well as the direct interaction between GSH and ox-MoS₂ NSs. Thus, a colorimetric sensing platform was constructed for GSH detection with good sensitivity and stability. This work provides a facile strategy for engineering structure of nanomaterials and improving enzyme-mimic performance.

Exfoliation procedure-dependent optical properties of solution deposited MoS2 films

The development of high-precision large-area optical coatings and devices comprising low-dimensional materials hinges on scalable solution-based manufacturability with control over exfoliation procedure-dependent effects. As such, it is critical to understand the influence of technique-induced transition metal dichalcogenide (TMDC) optical properties that impact the design, performance, and integration of advanced optical coatings and devices. Here, we examine the optical properties of semiconducting MoS2 films from the exfoliation formulations of four prominent approaches: solvent-mediated exfoliation, chemical exfoliation with phase reconversion, redox exfoliation, and native redox exfoliation. The resulting MoS2 films exhibit distinct refractive indices (n), extinction coefficients (k), dielectric functions (ε1 and ε2), and absorption coefficients (α). For example, a large index contrast of Δn ≈ 2.3 is observed. These exfoliation procedures and related chemistries produce different exfoliated flake dimensions, chemical impurities, carrier doping, and lattice strain that influence the resulting optical properties. First-principles calculations further confirm the impact of lattice defects and doping characteristics on MoS2 optical properties. Overall, incomplete phase reconfiguration (from 1T to mixed crystalline 2H and amorphous phases), lattice vacancies, intraflake strain, and Mo oxidation largely contribute to the observed differences in the reported MoS2 optical properties. These findings highlight the need for controlled technique-induced effects as well as the opportunity for continued development of, and improvement to, liquid phase exfoliation methodologies. Such chemical and processing-induced effects present compelling routes to engineer exfoliated TMDC optical properties toward the development of next-generation high-performance mirrors, narrow bandpass filters, and wavelength-tailored absorbers.

Environmental implication of MoS2 nanosheets: Effects on maize plant growth and soil microorganisms

Molybdenum disulfide (MoS₂) nanosheets have been used extensively in a variety of fields including medical and industrial. However, little is known about their toxicity effects, especially to edible plants. In this greenhouse study, maize (Zea mays) seedlings were exposed for 4 weeks, through the soil route, to 10 and 100 mg/kg of 2H MoS₂ nanosheets. Plant growth, physiological parameters (chlorophyll, antioxidants, and MDA), along with Mo and nutrient element contents were determined in plant tissues. Results showed that at both doses, the nanosheets decreased plant growth. Inductively coupled plasma-mass spectrometry data also showed that both 2H MoS₂ concentrations allowed Mo absorption and translocation by maize plants. Additionally, at 100 mg/kg the nanosheets significantly reduced Ca, Mg, Mn, and Zn in leaves, and Na in roots. Gene sequencing data of 16S rRNA showed, that MoS₂ nanosheets changed the soil microbial community structure, compared with the untreated control. In addition, nitrogen-fixing microorganisms such as Burkholderiales, Rhizobiales and Xanthobacteraceae were enriched. Overall, the data suggest that, even at low dose (10 mg/kg), the 2H MoS₂ nanosheets perturbed both the nutrient uptake by maize plants and the soil microbial communities.

Filling the Gap between Heteroatom Doping and Edge Enrichment of 2D Electrocatalysts for Enhanced Hydrogen Evolution

Composition modulation and edge enrichment are established protocols to steer the electronic structures and catalytic activities of two-dimensional (2D) materials. It is believed that a heteroatom enhances the catalytic performance by activating the chemically inert basal plane of 2D crystals. However, the edge and basal plane have inherently different electronic states, and how the dopants affect the edge activity remains ambiguous. Here we provide mechanistic insights into this issue by monitoring the hydrogen evolution reaction (HER) performance of phosphorus-doped MoS2 (P-MoS2) nanosheets via on-chip electrocatalytic microdevices. Upon phosphorus doping, MoS2 nanosheet gets catalytically activated and, more importantly, shows higher HER activity in the edge than the basal plane. In situ transport measurement demonstrates that the improved HER performance of P-MoS2 is derived from intrinsic catalytic activity rather than charge transfer. Density functional theory calculations manifest that the edge sites of P-MoS2 are energetically more favorable for HER. The finding guides the rational design of edge-dominant P-MoS2, reaching a minuscule onset potential of ∼30 mV and Tafel slope of 48 mV/dec that are benchmarked against other activation methods. Our results disclose the hitherto overlooked edge activity of 2D materials induced by heteroatom doping that will provide perspectives for preparing next-generation 2D catalysts.

3-Aminophenylboronic acid-functionalized molybdenum disulfide quantum dots for fluorescent determination of hypochlorite

A simple method is reported for hypochlorite determination based on fluorescence 3-aminophenylboronic acid-functionalized molybdenum disulfide quantum dots (B-MoS₂ QDs). B-MoS₂ QDs with strong fluorescence at 380 nm have been successfully synthesized by the amidation reaction between APBA and hydrothermal MoS₂ QDs. Hypochlorite sensing was proposed utilizing the fluorescent quenching effect of 3,3',5,5'-tetramethylbenzidine dihydrochloride (TMB) on B-MoS₂ QDs and the fast redox reaction between hypochlorite and TMB. The fluorescent quenching effect of TMB to B-MoS₂ QDs was proved to be caused by static dynamic quenching and inner filter effect. A good linear relationship was obtained in the hypochlorite concentration range from 1 to 20 μM, and the limit of detection (LOD) was 36.8 nM. The proposed fluorescent detection assay was simple and fast, taking only 5 min at room temperature. Satisfactory results were obtained in the standard spike recovery tests on tap water and milk samples, which indicate high potential in constructing fluorescent bio-detection assays.

On-Chip Investigation of Electrocatalytic Oxygen Reduction Reaction of 2D Materials

The on-chip electrocatalytic microdevice (OCEM) is an emerging platform specialized in the electrochemical investigation of single-entity nanomaterials, which is ideal for probing the intrinsic catalytic properties, optimizing performance, and exploring exotic mechanisms. However, the current catalytic applications of OCEMs are almost exclusively in electrocatalytic hydrogen/oxygen evolution reactions with minimized influence from the mass transfer. Here, an OCEM platform specially tailored to investigate the electrocatalytic oxygen reduction reaction (ORR) at a microscopic level by introducing electrolyte convection through a microfluidic flow cell is reported. The setup is established on gold microelectrodes and later successfully applied to investigate how Ar-plasma treatment affects the ORR activities of 2H MoS₂ . This study finds that Ar-plasma treatment significantly enhances the ORR performance of MoS₂ nanosheets owing to the introduction of surface defects. This study paves the way for highly efficient microscopic investigation of diffusion-controlled electrocatalytic reactions.

MoS2 quantum dots as fluorescent probe for methotrexate detection

Herein, we developed a unique fluorescence biosensor for methotrexate assay based on MoS₂ quantum dots, which were synthesized in one step using sodium molybdate and cysteine as raw materials. The fluorescence of MoS₂ QDs could be quenched when encountered with methotrexate, which was attributed to the inner filter effect (IFE). Furthermore, this present IFE-based method showed the linearity between the MoS₂ QDs fluorescence intensity and the methotrexate concentration in the range of 0.05-1 μM with the LOD of 42 nM. The practical applicability of this strategy was successfully demonstrated by detecting methotrexate in real samples. Results indicated that the proposed method could be a promising sensing platform for methotrexate analysis.

Exfoliation of MoS2 Quantum Dots: Recent Progress and Challenges

Although, quantum dots (QDs) of two-dimensional (2D) molybdenum disulfide (MoS2) have shown great potential for various applications, such as sensing, catalysis, energy storage, and electronics. However, the lack of a simple, scalable, and inexpensive fabrication method for QDs is still a challenge. To overcome this challenge, a lot of attention has been given to the fabrication of QDs, and several fabrication strategies have been established. These exfoliation processes are mainly divided into two categories, the 'top-down' and 'bottom-up' methods. In this review, we have discussed different top-down exfoliation methods used for the fabrication of MoS2 QDs and the advantages and limitations of these methods. A detailed description of the various properties of QDs is also presented.

Defect-Rich Molybdenum Sulfide Quantum Dots for Amplified Photoluminescence and Photonics-Driven Reactive Oxygen Species Generation

Transition metal dichalcogenide (TMD) quantum dots (QDs) with defects have attracted interesting chemistry due to the contribution of vacancies to their unique optical, physical, catalytic, and electrical properties. Engineering defined defects into molybdenum sulfide (MoS₂ ) QDs is challenging. Herein, by applying a mild biomineralization-assisted bottom-up strategy, blue photoluminescent MoS₂ QDs (B-QDs) with a high density of defects are fabricated. The two-stage synthesis begins with a bottom-up synthesis of original MoS₂ QDs (O-QDs) through chemical reactions of Mo and sulfide ions, followed by alkaline etching that creates high sulfur-vacancy defects to eventually form B-QDs. Alkaline etching significantly increases the photoluminescence (PL) and photo-oxidation. An increase in defect density is shown to bring about increased active sites and decreased bandgap energy; which is further validated with density functional theory calculations. There is strengthened binding affinity between QDs and O₂ due to lower gap energy (∆E_ST ) between S₁ and T₁ , accompanied with improved intersystem crossing (ISC) efficiency. Lowered gap energy contributes to assist e^- -h⁺ pair formation and the strengthened binding affinity between QDs and ³ O₂ . Defect engineering unravels another dimension of material properties control and can bring fresh new applications to otherwise well characterized TMD nanomaterials.

Highly Efficient Electrochemiluminescence Based on Luminol/MoS2 Quantum Dots@Zeolitic Imidazolate Framework-8 as an Emitter for Ultrasensitive Detection of MicroRNA

Herein, a highly efficient electrochemiluminescence (ECL) emitter, luminol/MoS₂ quantum dots@zeolitic imidazolate framework-8 (Lu/MoS₂ QDs@ZIF-8), with a positive charge was prepared to construct a novel luminol-H₂O₂-MoS₂ QD ternary ECL system for ultrasensitive detection of microRNA-21 (miRNA-21). The porous Lu/MoS₂ QDs@ZIF-8 was beneficial for reducing the accessible distance between various participants in the ternary system wherein co-reaction accelerator MoS₂ QDs promoted H₂O₂ to generate superoxide anion radicals (O₂^•-), which instantaneously reacted with luminol to produce robust ECL signals. Simultaneously, the positively charged Lu/MoS₂ QDs@ZIF-8 facilitated the enrichment of O₂^•- to further improve the ECL efficiency of luminol. Impressively, compared with the traditional binary luminol-H₂O₂ system, the ECL efficiency of this ternary system was increased by 12.7 times. In the aid of a target-cycled and endogenous adenosine triphosphate-driven signal amplification strategy, the biosensor with Lu/MoS₂ QDs@ZIF-8 as an ECL emitter achieved ultrasensitive detection for miRNA-21 with a detection limit of 14.6 aM. This work provides a promising perspective to construct a highly efficient ECL ternary system for biomolecule detection and potential disease diagnosis.

MoS2 quantum dots based MoS2/HKUST-1 composites for the highly efficient catalytic oxidation of elementary mercury

Due to the ever-tightening regulation on mercury emission in recent decades, there is an urgent need to develop novel materials for the removal of elemental mercury at coal-fired power plants. In this study, a series of MoS₂ quantum dots (QDs)-based MoS₂/HKUST-1 composite materials were prepared. It is found that MoS₂ QDs were encapsulated by HKUST-1 and enhanced the crystallinity and specific surface area of HKUST-1. The MoS₂/HKUST-1 showed excellent performance in catalytic oxidation of Hg⁰ as compared with pristine HKUST-1. It is found that surface layer of lattice oxygens is active and participates in Hg⁰ oxidation, while the consumption of surface oxygens then leads to the formation of oxygen vacancies on the surface. These vacancies are effective in the adsorption and dissociation of O₂, which subsequently participates in the oxidation of Hg⁰. Moreover, the study on the influence of commonly seen gas components, such as SO₂, NO, NH₃ and H₂O, etc., on Hg⁰ oxidation demonstrated that synergistic effects exist among these gas species. It is found that the presence of NO promotes the oxidation of Hg⁰ using oxygen as the oxidant.

Nano-bio interactions of 2D molybdenum disulfide

Two-dimensional (2D) molybdenum disulfide (MoS₂) is an ultrathin nanomaterial with a high degree of anisotropy, surface-to-volume ratio, chemical functionality and mechanical strength. These properties together enable MoS₂ to emerge as a potent nanomaterial for diverse biomedical applications including drug delivery, regenerative medicine, biosensing and bioelectronics. Thus, understanding the interactions of MoS₂ with its biological interface becomes indispensable. These interactions, referred to as "nano-bio" interactions, play a key role in determining the biocompatibility and the pathways through which the nanomaterial influences molecular, cellular and biological function. Herein, we provide a critical overview of the nano-bio interactions of MoS₂ and emphasize on how these interactions dictate its biomedical applications including intracellular trafficking, biodistribution and biodegradation. Also, a critical evaluation of the interactions of MoS₂ with proteins and specific cell types such as immune cells and progenitor/stem cells is illustrated which governs the short-term and long-term compatibility of MoS₂-based biomedical devices.

Size Effects in Single- and Few-Layer MoS2 Nanoflakes: Impact on Raman Phonons and Photoluminescence

The high optical absorption and emission of bidimensional MoS2 are fundamental properties for optoelectronic and biodetection applications and the opportunity to retain these properties in high quality nano-sized flakes would bring further possibilities. Here, a large set of single-layer and few-layer (2-3 layers) MoS2 flakes with size in the range from 10 nm to 20 μm are obtained on sapphire by vapor deposition techniques and evaluated combining the information from the Raman phonons with photoluminescence (PL) and absorption bands. The flakes have triangular shape and are found to be progressively relaxed from the tensile strain imposed by the sapphire substrate as their size is reduced. An increasing hole doping as size decreases is deduced from the blue shift of the A1g phonon, related to charge transfer from adsorbed oxygen. No clear correlation is observed between defects density and size, therefore, doping would be favored by the preferential adsorption of oxygen at the edges of the flakes, being progressively more important as the edge/surface ratio is incremented. This hole doping also produces a shift of the PL band to higher energies, up to 60 meV. The PL intensity is not found to be correlated to the size but to the presence of defects. The trends with size for single-layer and for 2-3 layer samples are found to be similar and the synthesis method does not influence PL efficiency which remains high down to 40 nm being thus promising for nanoscale photonics.

Two Faces Under a Hood: Unravelling the Energy Harnessing and Storage Properties of 1T-MoS2 Quantum Sheets for Next-Generation Stand-Alone Energy Systems

The two-dimensional 1T-MoS₂ quantum sheets (QSs) continuously seek attention due to their extraordinary energy harnessing and storage properties towards designing an all-in-one self-charging power system (SCPS). Herein, we have utilized the superior dual-functional nature of exfoliated MoS₂ QSs for SCPS via fabricating all-solid-state microsupercapacitors (MSC) as an energy storage device and triboelectric nanogenerator (TENG) with MoS₂ QSs based charge-trapping interfacial layer as the energy harvester. The electrochemical analysis of MoS₂ QSs MSC indicated their superior capacitive properties with a high areal capacitance (4.3 mF cm^-2), energy density (0.38 μWh cm^-2), and long cycle life. Furthermore, we emphasize the fabrication of MSC with shape diversity and performance uniformity via construction in several designable shapes, which exhibit superior electrochemical performances. The MoS₂ QSs based charge-trapping layer enhances the output performance of TENG dramatically with a peak power density as large as 10 μW cm^-2, which is 13-fold greater than that of the pristine TENG. As proof of the concept, we fabricated an all MoS₂ based SCPS which showed their ability to self-charge up to a maximum of 1050 mV, outperforming many SCPS reported previously. Overall, this work creates a way to utilize the bifunctional properties of MoS₂ QSs for the development of next-generation SCPS.

Tunable Conductance of MoS2 and WS2 Quantum Dots by Electron Transfer with Redox-Active Quinone

Due to their uniqueness in tunable photophysics, transition metal dichalcogenide (TMD) based quantum dots (QDs) have emerged as the next-generation quantum materials for technology-based semiconductor applications. This demands frontline research on the rational synthesis of the TMD QDs with controlled shape, size, nature of charge migration at the interface, and their easy integration in optoelectronic devices. In this article, with a controlled solution-processed synthesis of MoS₂ and WS₂ QDs, we demonstrate the disparity in their structural, optical, and electrical characteristics in bulk and confinement. With a series of steady-state and time-resolved spectroscopic measurements in different media, we explore the uncommon photophysics of MoS₂ and WS₂ QDs such as excitation-dependent photoluminescence and assess their excited state charge transfer kinetics with a redox-active biomolecule, menadione (MQ). In comparison to the homogeneous aqueous medium, photoinduced charge transfer between the QDs and MQ becomes more plausible in encapsulated cetyltrimethylammonium bromide (CTAB) micelles. Current sensing atomic force microscopy (CS-AFM) measurements at a single molecular level reveal that the facilitated charge transfer of QDs with MQ strongly correlates with an enhancement in their charge transport behavior. An increase in charge transport further depends on the density of states of the QDs directing a change in Schottky emission to Fowler-Nordheim (FN) type of tunneling across the metal-QD-metal junction. The selective response of the TMD QDs while in proximity to external molecules can be used to design advanced optoelectronic devices and applications involving rectifiers and tunnel diodes for future quantum technology.

Interfacial Engineered Vanadium Oxide Nanoheterostructures Synchronizing High-Energy and Long-Term Potassium-Ion Storage

Potassium ion hybrid capacitors (KICs) have drawn tremendous attention for large-scale energy storage applications because of their high energy and power densities and the abundance of potassium sources. However, achieving KICs with high capacity and long lifespan remains challenging because the large size of potassium ions causes sluggish kinetics and fast structural pulverization of electrodes. Here, we report a composite anode of VO2-V2O5 nanoheterostructures captured by a 3D N-doped carbon network (VO2-V2O5/NC) that exhibits a reversible capacity of 252 mAh g-1 at 1 A g-1 over 1600 cycles and a rate performance with 108 mAh g-1 at 10 A g-1. Quantitative kinetics analyses demonstrate that such great rate capability and cyclability are enabled by the capacitive-dominated potassium storage mechanism in the interfacial engineered VO2-V2O5 nanoheterostructures. The further fabricated full KIC cell consisting of a VO2-V2O5/NC anode and an active carbon cathode delivers a high operating voltage window of 4.0 V and energy and power densities up to 154 Wh kg-1 and 10 000 W kg-1, respectively, surpassing most state-of-the-art KICs.