Wide bicontinuous compositional windows from co-networks made with telechelic macromonomers

Local volume concentration, packing domains, and scaling properties of chromatin

We propose the Self Returning Excluded Volume (SR-EV) model for the structure of chromatin based on stochastic rules and physical interactions. The SR-EV rules of return generate conformationally defined domains observed by single-cell imaging techniques. From nucleosome to chromosome scales, the model captures the overall chromatin organization as a corrugated system, with dense and dilute regions alternating in a manner that resembles the mixing of two disordered bi-continuous phases. This particular organizational topology is a consequence of the multiplicity of interactions and processes occurring in the nuclei, and mimicked by the proposed return rules. Single configuration properties and ensemble averages show a robust agreement between theoretical and experimental results including chromatin volume concentration, contact probability, packing domain identification and size characterization, and packing scaling behavior. Model and experimental results suggest that there is an inherent chromatin organization regardless of the cell character and resistant to an external forcing such as RAD21 degradation.

Programming Mechanical Properties through Encoded Network Topologies

Polymer networks remain an essential class of soft materials. Despite their use in everyday materials, connecting the molecular structure of the network to its macroscopic properties remains an active area of research. Much current research is enabled by advances in modern polymer chemistry providing an unprecedented level of control over macromolecular structure. At the same time, renewed interest in self-healing, dynamic, and/or adaptable materials continues to drive substantial interest in polymer network design. As part of a special issue focused on research performed in the Polymer Science and Engineering Department at the University of Massachusetts, Amherst, this review highlights connections between macromolecular structure of networks and observed mechanical properties as investigated by the Tew research group.

Local dynamics and failure of inhomogeneous polymer networks

Inhomogeneous crosslinked polymers are powerful platforms for materials design, because they can be synthesized from materials that provide complimentary properties to the resulting gel. For example, a membrane with both glassy and rubbery domains will be mechanically robust while enabling transport. The dynamics, and mechanical and failure properties of rubbery/glassy conetworks are only beginning to be studied, and there is likely to be strong heterogeneities in the dynamics and mechanical response. In this study, we use coarse-grained molecular dynamics simulations to generate microphase separated rubbery/glassy polymer networks with a bicontinuous morphology via in silico crosslinking. We study the effect of phase boundary on the local mobility gradient, and our simulation results reveal an asymmetric shift in the local mobility gradient across the interface that extends deeper into the phase with a lower Tg when the system temperature is between the glass transition temperatures of the two phases. Moreover, by employing a model that allows bond breaking, we examine the microscopic mechanism for failure in these networks as a function of the molecular weight of polymer strands between crosslinks and the number fraction of the glassy domain. Under uniaxial extension, we find that the stress is initially larger in the glassy domain. As the deformation proceeds, the segmental dynamics of the two phases homogenize, and subsequently bond breaking begins.

Photocrosslinkable Polymeric Bicontinuous Microemulsions

We present an approach to photocrosslink bicontinuous microemulsions derived from ternary blends of poly(methoxyethyl acrylate) (PM, Mn = 4200 g/mol), poly(hexyl methacrylate-co-coumarin methacrylate) (PHC, Mn = 6800 g/mol), and PM-b-PHC diblock polymer (Mn = 19,400 g/mol) in a phase-selective manner, enabling structural characterization at an unprecedented level of detail. This strategy utilizes the [2 + 2] photodimerization reaction of coumarin derivatives to covalently crosslink blends without the use of harsh reagents or disruptive thermal treatment, thus preserving the intricate network structure throughout curing. The resulting crosslinked bicontinuous microemulsions exhibited rubbery behavior at elevated temperatures, achieving an elastic shear modulus of nearly 1 MPa at 70 °C, owing to the presence of the three-dimensional co-continuous network morphology. The dimensional stabilization afforded by crosslinking further allowed the microstructure to be directly imaged by scanning electron microscopy and atomic force microscopy. Contrary to recent theoretical findings, the BμE appears in a wide temperature and compositional window, suggesting that it is a robust feature of these blends. As a proof of concept demonstrating both the utility of bicontinuous microemulsion-derived materials and versatility of this strategy toward broader applications in energy storage and transport, the uncrosslinked portion of a cured blend was extracted by washing and replaced with an ionic liquid; the resultant heterogeneous solid electrolyte exhibited a room-temperature conductivity of 2 mS/cm, approximately one-quarter that of the pure ionic liquid.

Physical, Electrochemical, and Solvent Permeation Properties of Amphiphilic Conetwork Membranes Formed through Interlinking of Poly(vinylidene fluoride)-Graft-Poly[(2-dimethylamino)ethyl Methacrylate] with Telechelic Poly(ethylene glycol) and Small Molecular Weight Cross-Linkers

We report the preparation of dense and porous amphiphilic conetwork (APCN) membranes through the covalent interconnection of poly(vinylidene fluoride)-graft-poly[(2-dimethylamino)ethyl methacrylate] (PVDF-g-PDMAEMA) copolymers with telechelic poly(ethylene glycol) (PEG) or α,α-dichloro-p-xylene (XDC). The dense APCN membranes exhibit varying solvent swelling and mechanical properties depending on the compositions and overall crystallinity. The crystallinity of both PVDF (20-47%) and PEG (9-17%) is significantly suppressed in the dense APCNs prepared through the interconnection of PVDF-g-PDMAEMA with reactive PEG as compared to the APCN membranes (48-53%) prepared with XDC as well as mechanical blend of PVDF-g-PDMAEMA plus nonreactive PEG. The dense APCN membranes exhibit a good transport number of monovalent ions and ionic conductivity. The APCN membrane interconnected with PEG and containing binary ionic liquids exhibits a room-temperature lithium ion conductivity of 0.52 mS/cm. On the other hand, APCN ultrafiltration (UF) membranes exhibit organic solvent-resistant behavior. The UF membrane obtained by interconnecting PVDF-g-PDMAEMA with telechelic PEG shows low protein fouling propensity, higher hydrophilicity, and water flux as compared to membranes prepared using XDC as the interconnecting agent. The significant effect of the covalent interconnection of the amphiphilic graft copolymers with telechelic PEG or XDC on the overall properties provides a good opportunity to modulate the properties and performance of APCN membranes.

Bottlebrush Amphiphilic Polymer Co-Networks

We report the synthesis of novel poly(ethylene glycol) and poly(dimethyl siloxane) (PEG and PDMS, respectively) bottlebrush amphiphilic polymer co-networks (B-APCNs) with high gel fractions by a grafting-through ring-opening metathesis polymerization. By varying the volume fraction of PEG (ϕPEG), we alter the crystallinity of the networks, achieving complete suppression of PEG crystallinity at ϕPEG=0.35. Furthermore, we show that the crystallinity of these networks can be tuned to alter their moduli. Through dynamic mechanical analysis, we show that the storage and loss moduli of networks with completely suppressed crystallinity (ϕPEG=0.35) behave similarly to a PDMS homopolymer bottlebrush network. These bottlebrush networks represent an unexplored architecture for the field of amphiphilic polymer co-networks.

Synthesis and characterization of poly(ethylene glycol) bottlebrush networks via ring-opening metathesis polymerization

Herein it is reported how the overlap concentration (C*) can be used to overcome crosslinking due to diol impurities in commercial PEG, allowing for the synthesize of bottlebrush polymers with good control over molecular weight. Additionally, PEG-based bottlebrush networks are synthesized via ROMP, attaining high conversions with minimal sol fractions (<2%). The crystallinity and mechanical properties of these networks are then further altered by solvent swelling with phosphate buffer solution (PBS) and 1-ethyl-3-methylimidazolium ethyl sulfate/DCM cosolvents. The syntheses reported here highlight the potential of the bottlebrush network architecture for use in the rational design of new materials.

Nanostructured Block Polymer Electrolytes: Tailoring Self-Assembly to Unlock the Potential in Lithium-Ion Batteries

ConspectusIon-containing solid block polymer (BP) electrolytes can self-assemble into microphase-separated domains to facilitate the independent optimization of ion conduction and mechanical stability; this assembly behavior has the potential to improve the functionality and safety of lithium-ion batteries over liquid electrolytes to meet future demands (e.g., large capacities and long lifetimes) in various applications. However, significant enhancements in the ionic conductivity and processability of BPs must be realized for BP-based electrolytes to become robust alternatives in commercial devices. Toward this end, the controlled modification of BP electrolytes' intra-domain (nanometer-scale) and multi-grain (micrometer-scale) structure is one viable approach; intra-domain ion transport and segmental compatibility (related to the effective Flory-Huggins parameter, χ_eff) can be increased by tuning the ion and monomer-segment distributions, and the morphology can be selected such that the multi-grain transport is less sensitive to grain size and orientation.To highlight the characteristics of intra-domain structure that promote efficient ion transport, this Account begins by describing the relationship between BP thermodynamics (namely, χ_eff and the statistical segment length, b, which is indicative of chain stiffness) and local ion concentration. These thermodynamic insights are vital because they inform the selection of synthesis and formulation variables, such as polymer and ion chemistry, polymer molecular weight and composition, and ion concentration, which boost electrolyte performance. In addition to its relationship with local ion transport, χ_eff is also an important factor with respect to electrolyte processability. For example, a reduced χ_eff can allow BP electrolytes to be processed at lower temperatures (i.e., lower energy input), with less solvent (i.e., reduced waste), and/or for shorter times (i.e., higher throughput) yet still form desired nanostructures. This Account also examines the impact of electrolyte preparation and processing on the ion transport across nanostructured grains because of grain size and orientation. As morphologies with a 3D-connected versus 2D-connected conducting phase show different sensitivities to conductivity losses that can occur because of the fabrication methods, it is necessary to account for electrolyte processing effects when probing ion transport.The intra-domain and micrometer-scale structure also can be tuned using either tapered BPs (macromolecules with modified monomer-segment composition profiles between two homogeneous blocks) or blends of BPs and homopolymers, independent of the BP molecular weight and composition, as detailed herein. The application of TBPs or BP/HP blends as ion-conducting materials leads to improved ion transport, reduced χ_eff, and greater availability of morphologies with 3D connectivity relative to traditional (non-tapered and unblended) BP electrolytes. This feature results from the fact that ion transport is related more closely to the monomer-segment distributions within a domain than the overall nanoscale morphology or average polymer/ion mobilities. Taken together, this Account describes how ion transport and processability are influenced by BP architecture and nanostructural features, and it provides avenues to tune nanoassemblies that can contribute to improved lithium-ion battery technologies to meet future demands.

Field-Theoretic Simulations for Block Copolymer Melts Using the Partial Saddle-Point Approximation

Field-theoretic simulations (FTS) provide an efficient technique for investigating fluctuation effects in block copolymer melts with numerous advantages over traditional particle-based simulations. For systems involving two components (i.e., A and B), the field-based Hamiltonian, Hf[W-,W+], depends on a composition field, W-(r), that controls the segregation of the unlike components and a pressure field, W+(r), that enforces incompressibility. This review introduces researchers to a promising variant of FTS, in which W-(r) fluctuates while W+(r) tracks its mean-field value. The method is described in detail for melts of AB diblock copolymer, covering its theoretical foundation through to its numerical implementation. We then illustrate its application for neat AB diblock copolymer melts, as well as ternary blends of AB diblock copolymer with its A- and B-type parent homopolymers. The review concludes by discussing the future outlook. To help researchers adopt the method, open-source code is provided that can be run on either central processing units (CPUs) or graphics processing units (GPUs).

Instability of the Microemulsion Channel in Block Copolymer-Homopolymer Blends

Field theoretic simulations are used to predict the equilibrium phase diagram of symmetric blends of AB diblock copolymer with A- and B-type homopolymers. Experiments generally observe a channel of bicontinuous microemulsion (BμE) separating the ordered lamellar (LAM) phase from coexisting homopolymer-rich (A+B) phases. However, our simulations find that the channel is unstable with respect to macrophase separation, in particular, A+B+BμE coexistence at high T and A+B+LAM coexistence at low T. The preference for three-phase coexistence is attributed to a weak attractive interaction between diblock monolayers.

Stress-Induced Orientation of Cocontinuous Nanostructures within Randomly End-Linked Copolymer Networks

Randomly end-linked copolymer networks (RECNs) provide a robust route to self-assembled cocontinuous nanostructures. Here, we study the orientation of cocontinuous polystyrene/poly(d,l-lactide) (PS/PLA) RECNs induced by uniaxial stretching above the glass transition temperatures of the components. Small-angle X-ray scattering (SAXS) reveals that the domains initially undergo nonaffine stretching at low strain (ε < 0.4), followed by domain rotation at larger strains, yielding a "soft elastic" response and providing a high degree of orientation. Transmission electron microscopy (TEM) tomography confirms that stretching leads to topological changes in the nanostructure, corresponding to reorganization of domain interfaces. The combination of orientation at the molecular and nanostructural levels provides substantial improvements in yield strength, toughness, and stiffness. In addition to possibilities for improving mechanical properties, cocontinuous nanostructures with controlled levels of orientation have potential in a variety of contexts including directional ion transport and energy absorption.

Thermodynamics of Counterion Release Is Critical for Anion Exchange Membrane Conductivity

As the field of anion exchange membranes (AEMs) employs an increasing variety of cations, a critical understanding of cation properties must be obtained, especially as they relate to membrane ion conductivity. Here, to elucidate such properties, metal cation-based AEMs, featuring bis(norbornene) nickel, ruthenium, or cobalt complexes, were synthesized and characterized. In addition, isothermal titration calorimetry (ITC) was used to probe counterion exchange thermodynamics in order to understand previously reported differences in conductivity. The ion conductivity data reported here further demonstrated that nickel-complex cations had higher conductivity as compared to their ruthenium and cobalt counterparts. Surprisingly, bulk hydration number, ion concentration, ion exchange capacity, and activation energy were not sufficient to explain differences in conductivity, so the thermodynamics of metal cation-counterion association were explored using ITC. Specifically, for the nickel cation as compared to the other two metal-based cations, a larger thermodynamic driving force for chloride counterion release was observed, shown through a smaller Δ H_tot for counterion exchange, which indicated weaker cation-counterion association. The use of ITC to study cation-counterion association was further exemplified by characterizing more traditional AEM cations, such as quaternary ammoniums and an imidazolium cation, which demonstrated small variances in their enthalpic response, but an overall Δ H_tot similar to that of the nickel-based cation. The cation hydration, rather than its hydration shell or the bulk hydration of the membrane, likely played the key role in determining the strength of the initial cation-counterion pair. This report identifies for the first time how ITC can be used to experimentally determine thermodynamic quantities that are key parameters for understanding and predicting conductivity in AEMs.

Self-Supporting, Hydrophobic, Ionic Liquid-Based Reference Electrodes Prepared by Polymerization-Induced Microphase Separation

Interfaces of ionic liquids and aqueous solutions exhibit stable electrical potentials over a wide range of aqueous electrolyte concentrations. This makes ionic liquids suitable as bridge materials that separate in electroanalytical measurements the reference electrode from samples with low and/or unknown ionic strengths. However, methods for the preparation of ionic liquid-based reference electrodes have not been explored widely. We have designed a convenient and reliable synthesis of ionic liquid-based reference electrodes by polymerization-induced microphase separation. This technique allows for a facile, single-pot synthesis of ready-to-use reference electrodes that incorporate ion conducting nanochannels filled with either 1-octyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide or 1-dodecyl-3-methylimidazolium bis(trifluoromethyl sulfonyl)imide as ionic liquid, supported by a mechanically robust cross-linked polystyrene phase. This synthesis procedure allows for the straightforward design of various reference electrode geometries. These reference electrodes exhibit a low resistance as well as good reference potential stability and reproducibility when immersed into aqueous solutions varying from deionized, purified water to 100 mM KCl, while requiring no correction for liquid junction potentials.

Nanoporous Thermosets with Percolating Pores from Block Polymers Chemically Fixed above the Order-Disorder Transition

A lamellar diblock polymer combining a cross-linkable segment with a chemically etchable segment was cross-linked above its order-disorder temperature (TODT) to kinetically trap the morphology associated with the fluctuating disordered state. After removal of the etchable block, evaluation of the resulting porous thermoset allows for an unprecedented experimental characterization of the trapped disordered phase. Through a combination of small-angle X-ray scattering, nitrogen sorption, scanning electron microscopy, and electron tomography experiments we demonstrate that the nanoporous structure exhibits a narrow pore size distribution and a high surface to volume ratio and is bicontinuous over a large sample area. Together with the processability of the polymeric starting material, the proposed system combines attractive attributes for many advanced applications. In particular, it was used to design new composite membranes for the ultrafiltration of water.

Robust Polymer Electrolyte Membranes with High Ambient-Temperature Lithium-Ion Conductivity via Polymerization-Induced Microphase Separation

Mechanically robust polymer electrolyte membranes (PEMs) exhibiting high ionic conductivity at ambient temperature are a prerequisite for next-generation electrochemical devices. We utilized a polymerization-induced microphase separation (PIMS) strategy to prepare nanostructured materials comprising continuous conducting nanochannels intertwined with a mechanically and thermally robust cross-linked polymeric framework. Addition of succinonitrile (SN) rendered the poly(ethylene oxide)/lithium (Li) salt conducting domains completely amorphous, resulting in outstanding conductivities (∼0.35 mS/cm) at 30 °C. Concurrently, a densely cross-linked polystyrene framework provided mechanical robustness (modulus E' ≈ 0.3 GPa at 30 °C) to the hybrid material. This work highlights a facile, single-pot strategy involving a homogeneous liquid reaction precursor that yields a high-performance ion-conducting membrane attractive for lithium-battery applications.

Nanophasic morphologies as a function of the composition and molecular weight of the macromolecular cross-linker in poly(N-vinylimidazole)-l-poly(tetrahydrofuran) amphiphilic conetworks: bicontinuous domain structure in broad composition ranges

Compositionally asymmetrical morphologies and cocontinous nanophase-separated structures are formed over a broad composition range, affected by composition and the molecular weights of macromonomers.

Double-networks based on pH-responsive, amphiphilic “core-first” star first polymer conetworks prepared by sequential RAFT polymerization

Double-networks based on amphiphilic polymer conetworks synthesized using RAFT polymerization were prepared, exhibiting pH-responsiveness, nanophase separation and enhanced mechanical properties.

Real-Time Monitoring of Chemical and Topological Rearrangements in Solidifying Amphiphilic Polymer Co-Networks: Understanding Surface Demixing

Amphiphilic polymer co-networks provide a unique route to integrating contrasting attributes of otherwise immiscible components within a bicontinuous percolating morphology and are anticipated to be valuable for applications such as biocatalysis, sensing of metabolites, and dual dialysis membranes. These co-networks are in essence chemically forced blends and have been shown to selectively phase-separate at surfaces during film formation. Here, we demonstrate that surface demixing at the air-film interface in solidifying polymer co-networks is not a unidirectional process; instead, a combination of kinetic and thermodynamic interactions leads to dynamic molecular rearrangement during solidification. Time-resolved gravimetry, low contact angles, and negative out-of-plane birefringence provided strong experimental evidence of the transitory trapping of thermodynamically unfavorable hydrophilic moieties at the air-film interface due to fast asymmetric solvent depletion. We also find that slow-drying hydrophobic elements progressively substitute hydrophilic domains at the surface as the surface energy is minimized. These findings are broadly applicable to common-solvent bicontinuous systems and open the door for process-controlled performance improvements in diverse applications. Similar observations could potentially be coupled with controlled polymerization rates to maximize the intermingling of bicontinuous phases at surfaces, thus generating true three-dimensional, bicontinuous, and undisturbed percolation pathways throughout the material.

Anhydrous Proton Conducting Polymer Electrolyte Membranes via Polymerization-Induced Microphase Separation

Solid-state polymer electrolyte membranes (PEMs) exhibiting high ionic conductivity coupled with mechanical robustness and high thermal stability are vital for the design of next-generation lithium-ion batteries and high-temperature fuel cells. We present the in situ preparation of nanostructured PEMs incorporating a protic ionic liquid (IL) into one of the domains of a microphase-separated block copolymer created via polymerization-induced microphase separation. This facile, one-pot synthetic strategy transforms a homogeneous liquid precursor consisting of a poly(ethylene oxide) (PEO) macro-chain-transfer agent, styrene and divinylbenzene monomers, and protic IL into a robust and transparent monolith. The resulting PEMs exhibit a bicontinuous morphology comprising PEO/protic IL conducting pathways and highly cross-linked polystyrene (PS) domains. The cross-linked PS mechanical scaffold imparts thermal and mechanical stability to the PEMs, with an elastic modulus approaching 10 MPa at 180 °C, without sacrificing the ionic conductivity of the system. Crucially, the long-range continuity of the PEO/protic IL conducting nanochannels results in an outstanding ionic conductivity of 14 mS/cm at 180 °C. We posit that proton conduction in the protic IL occurs via the vehicular mechanism and the PEMs exhibit an average proton transference number of 0.7. This approach is very promising for the development of high-temperature, robust PEMs with excellent proton conductivities.

Microphase-Separated PE/PEO Thin Films Prepared by Plasma-Assisted Vapor Phase Deposition

Immiscible polymer blends tend to undergo phase separation with the formation of nanoscale architecture which can be used in a variety of applications. Different wet-chemistry techniques already exist to fix the resultant polymeric structure in predictable manner. In this work, an all-dry and plasma-based strategy is proposed to fabricate thin films of microphase-separated polyolefin/polyether blends. This is achieved by directing (-CH2-)100 and (-CH2-CH2-O-)25 oligomer fluxes produced by vacuum thermal decomposition of poly(ethylene) and poly(ethylene oxide) onto silicon substrates through the zone of the glow discharge. The strategy enables mixing of thermodynamically incompatible macromolecules at the molecular level, whereas electron-impact-initiated radicals serve as cross-linkers to arrest the subsequent phase separation at the nanoscale. The mechanism of the phase separation as well as the morphology of the films is found to depend on the ratio between the oligomeric fluxes. For polyolefin-rich mixtures, polyether molecules self-organize by nucleation and growth into spherical domains with average height of 22 nm and average diameter of 170 nm. For equinumerous fluxes and for mixtures with the prevalence of polyethers, spinodal decomposition is detected that results in the formation of bicontinuous structures with the characteristic domain size and spacing ranging between 5 × 10(1) -7 × 10(1) nm and 3 × 10(2)-4 × 10(2) nm, respectively. The method is shown to produce films with tunable wettability and biologically nonfouling properties.

A clean synthesis approach to biocompatible amphiphilic conetworks via reversible addition–fragmentation chain transfer polymerization and thiol–ene chemistry

A series of APCNs from amphiphilic clickable pentablock copolymers with narrow polydispersity were synthesized via RAFT polymerization. The resulting APCNs exhibit unique amphiphilic characters, and can be potentially employed in some biomaterial applications.

Poly(N-vinylimidazole)-l-poly(propylene glycol) amphiphilic conetworks and gels: molecularly forced blends of incompatible polymers with single glass transition temperatures of unusual dependence on the composition

New molecularly forced blends of incompatible poly(N-vinylimidazole) and poly(propylene glycol) polymers with single glass transition temperatures.

Synthesis and Selective Loading of Polyhydroxyethyl Methacrylate-l-Polysulfone Amphiphilic Polymer Conetworks

Polyhydroxyethyl methacrylate-linked by-polysulfone amphiphilic polymer conetworks of two types of segments with T_g above room temperature are presented. The conetworks are prepared by free radical copolymerization of methacryloyl-terminated PSU macromers with 2-ethyl methacrylate, followed by removal of the TMS protecting groups by acidic hydrolysis. Phase separation in the nanometer range due to the immiscibility of the two covalently linked segments is observed using transmission electron and scanning force microscopy. The swelling of the conetworks in water and methanol as polar solvents and chloroform as nonpolar solvent are studied gravimetrically and then in a more detailed fashion by solid-state NMR spectroscopy. Selective swelling and also targeted loading of a small organic model compound specifically to one of the two phases are demonstrated.

Self-Sealing and Puncture Resistant Breathable Membranes for Water-Evaporation Applications

Breathable and waterproof membranes that self-seal damaged areas are prepared by modifying a poly(ether ester) membrane with an amphiphilic polymer co-network. The latter swells in water and the gel closes punctures. Damaged composite membranes remain water tight up to pressures of at least 1.6 bar. This material is useful for applications where water-vapor permeability, self-sealing properties, and waterproofness are desired, as demonstrated for a medical cooling device.

Amphiphilic Polymer Conetworks Based on End-Linked "Core-First" Star Block Copolymers: Structure Formation with Long-Range Order

Amphiphilic polymer conetworks are cross-linked polymers that swell both in water and in organic solvents and can phase separate on the nanoscale in the bulk or in selective solvents. To date, however, this phase separation has only been reported with short-range order, characterized by disordered morphologies. We now report the first example of amphiphilic polymer conetworks, based on end-linked "core-first" star block copolymers, that form a lamellar phase with long-range order. These mesoscopically ordered systems can be produced in a simple fashion and exhibit significantly improved mechanical properties.

Designed enzymatically degradable amphiphilic conetworks by radical ring-opening polymerization

A simple and versatile route for making functional biodegradable amphiphilic conetworks (APCNs) with unique swelling property and excellent enzymatic degradability is presented. The APCNs were made by radical ring-opening copolymerization of cyclic ketene acetal and vinyl cyclopropane derivative.