Observation of excitonic fine structure in a 2D transition-metal dichalcogenide semiconductor

Large-Scale Analysis of Defects in Atomically Thin Semiconductors using Hyperspectral Line Imaging

Point defects play a crucial role in determining the properties of atomically thin semiconductors. This work demonstrates the controlled formation of different types of defects and their comprehensive optical characterization using hyperspectral line imaging (HSLI). Distinct optical responses are observed in monolayer semiconductors grown under different stoichiometries using metal-organic chemical vapor deposition. HSLI enables the simultaneous measurement of 400 spectra, allowing for statistical analysis of optical signatures at close to a centimeter scale. The study discovers that chalcogen-rich samples exhibit remarkable optical uniformity due to reduced precursor accumulation compared to the metal-rich case. The utilization of HSLI as a facile and reliable characterization tool pushes the boundaries of potential applications for atomically thin semiconductors in future devices.

Programmable Optical Encryption Based on Electrical-Field-Controlled Exciton-Trion Transitions in Monolayer WS2

Optical encryption is receiving much attention with the rapid growth of information technology. Conventional optical encryption usually relies on specific configurations, such as metasurface-based holograms and structure colors, not meeting the requirements of increasing dynamic and programmable encryption. Here, we report a programmable optical encryption approach using WS2/SiO2/Au metal-oxide-semiconductor (MOS) devices, which is based on the electrical-field-controlled exciton-trion transitions in monolayer WS2. The modulation depth of the MOS device reflection amplitude up to 25% related to the excitons ensures the fidelity of information, and the decryption based on the near excitonic resonance assures security. With such devices, we successfully demonstrate their applications in real-time encryption of ASCII codes and visual images. For the latter, it can be implemented at the pixel level. The strategy shows significant potential for low-cost, low-energy-consumption, easily integrated, and high-security programmable optical encryptions.

Determination and investigation of defect domains in multi-shape monolayer tungsten disulfide

Single-layer tungsten disulfide (WS2) is among the most widely investigated two-dimensional materials. Synthesizing it over large areas would enable the exploitation of its appealing optical and electronic properties in industrial applications. However, defects of different nature, concentration and distribution profoundly affect the optical as well as the electronic properties of this crystal. Controlling the defect density distribution can be an effective way to tailor the local dielectric environment and therefore the electronic properties of the system. In this work we investigate the defects in single-layer WS2, grown in different shapes by liquid phase chemical vapor deposition, where the concentration of certain defect species can be controlled by the growth conditions. The properties of the material are surveyed by means of optical spectroscopy, photoelectron spectroscopy and Kelvin probe force microscopy. We determine the chemical nature of the defects and study their influence on the optical and electronic properties of WS2. This work contributes to the understanding of the microscopic nature of the intrinsic defects in WS2, helping the development of defect-based technologies which rely on the control and engineering of defects in dielectric 2D crystals.

Engineering the Electrical and Optical Properties of WS2 Monolayers via Defect Control

Two-dimensional (2D) materials as tungsten disulphide (WS2 ) are rising as the ideal platform for the next generation of nanoscale devices due to the excellent electric-transport and optical properties. However, the presence of defects in the as grown samples represents one of the main limiting factors for commercial applications. At the same time, WS2 properties are frequently tailored by introducing impurities at specific sites. Aim of this review paper is to present a complete description and discussion of the effects of both intentional and unintentional defects in WS2 , by an in depth analysis of the recent experimental and theoretical investigations reported in the literature. First, the most frequent intrinsic defects in WS2 are presented and their effects in the readily synthetized material are discussed. Possible solutions to remove and heal unintentional defects are also analyzed. Following, different doping schemes are reported, including the traditional substitution approach and innovative techniques based on the surface charge transfer with adsorbed atoms or molecules. The plethora of WS2 monolayer modifications presented in this review and the systematic analysis of the corresponding optical and electronic properties, represent strategic degrees of freedom the researchers may exploit to tailor WS2 optical and electronic properties for specific device applications.

Photoluminescence Enhancement of Monolayer WS2 by n-Doping with an Optically Excited Gold Disk

In nanophotonics and quantum optics, we aim to control and manipulate light with tailored nanoscale structures. Hybrid systems of nanostructures and atomically thin materials are of interest here, as they offer rich physics and versatility due to the interaction between photons, plasmons, phonons, and excitons. In this study, we explore the optical and electronic properties of a hybrid system, a naturally n-doped monolayer WS2 covering a gold disk. We demonstrate that the nonresonant excitation of the gold disk in the high absorption regime efficiently generates hot carriers via localized surface plasmon excitation, which n-dope the monolayer WS2 and enhance the photoluminescence emission by regulating the multiexciton population and stabilizing the neutral exciton emission. The results are relevant to the further development of nanotransistors in photonic circuits and optoelectronic applications.

Enhanced interactions of excitonic complexes in free-standing WS2

Excitonic complexes, bound states of electrons and holes, provide a promising platform in monolayer transition-metal dichalcogenide (TMDC) semiconductors for investigating diverse many-body interaction phenomena. The surrounding dielectric environment has been found to strongly influence the excitonic properties of the TMDC monolayers. While the impact of different dielectric surroundings on two-dimensional semiconductor materials and their strong correlations have been well studied, the effects on exciton formation and its properties resulting from a further reduction in dielectric screening remain elusive. In this study, we examined free-standing tungsten disulfide (WS2) monolayers, where the efficient generation of higher-order correlated excitonic complexes is readily observed. This phenomenon arises from the effective mutual interactions among excitons and internal carriers, attributed to the modulated exciton dynamics generated by the further reduced dielectric screening effect in the freestanding structure. The formation efficiency of excitonic complexes is enhanced and the multiple biexciton species (five particles such as charged biexcitons and acceptor/donor-bound biexcitons) are successfully induced under low excitation intensity and moderate temperature conditions. Our findings offer valuable insights into the influence of the dielectric environment on exciton interactions and enable a productive avenue for exploring fundamental many-body interactions, providing new possibilities for dielectric engineering of atomic thin semiconductors.

Tunable electronic and optical properties of ferroelectric WS2/Ga2O3heterostructures

To integrate two-dimensional (2D) materials into van der Waals heterostructures (vdWHs) is regarded as an effective strategy to achieve multifunctional devices. The vdWHs with strong intrinsic ferroelectricity is promising for applications in the design of new electronic devices. The polarization reversal transitions of 2D ferroelectric Ga2O3layers provide a new approach to explore the electronic structure and optical properties of modulated WS2/Ga2O3vdWHs. The WS2/Ga2O3↑ and WS2/Ga2O3↓ vdWHs are designed to explore possible characteristics through the electric field and biaxial strain. The biaxial strain can effectively modulate the mutual transition of two mode vdWHs in type II and type I band alignment. The strain engineering enhances the optical absorption properties of vdWHs, encompassing excellent optical absorption properties in the range from infrared to visible to ultraviolet, ensuring promising applications in flexible electronics and optical devices. Based on the highly modifiable physical properties of the WS2/Ga2O3vdWHs, we have further explored the potential applications for the field-controlled switching of the channel in MOSFET devices.

Greatly Enhanced Resonant Exciton-Trion Conversion in Electrically Modulated Atomically Thin WS2 at Room Temperature

Excitonic resonance in atomically thin semiconductors offers a favorite platform to study 2D nanophotonics in both classical and quantum regimes and promises potentials for highly tunable and ultra-compact optical devices. The understanding of charge density dependent exciton-trion conversion is the key for revealing the underlaying physics of optical tunability. Nevertheless, the insufficient and inefficient light-matter interactions hinder the observation of trionic phenomenon and the development of excitonic devices for dynamic power-efficient electro-optical applications. Here, by engaging an optical cavity with atomically thin transition metal dichalcogenides (TMDCs), greatly enhanced exciton-trion conversion is demonstrated at room temperature (RT) and achieve electrical modulation of reflectivity of ≈40% at exciton and 7% at trion state, which correspondingly enables a broadband large phase tuning in monolayer tungsten disulfide. Besides the absorptive conversion, ≈100% photoluminescence conversion from excitons to trions is observed at RT, illustrating a clear physical mechanism of an efficient exciton-trion conversion for extraordinary optical performance. The results indicate that both excitons and trions can play significant roles in electrical modulation of the optical parameters of TMDCs at RT. The work shows the real possibility for realizing electrical tunable and multi-functional ultra-thin optical devices using 2D materials.

Twist-angle-dependent momentum-space direct and indirect interlayer excitons in WSe2/WS2 heterostructure

Interlayer excitons (ILEs) in the van der Waals (vdW) heterostructures of type-II band alignment transition metal dichalcogenides (TMDCs) have attracted significant interest owing to their unique exciton properties and potential in quantum information applications. However, the new dimension that emerges with the stacking of structures with a twist angle leads to a more complex fine structure of ILEs, presenting both an opportunity and a challenge for the regulation of the interlayer excitons. In this study, we report the evolution of interlayer excitons with the twist angle in the WSe₂/WS₂ heterostructure and identify the direct (indirect) interlayer excitons by combining photoluminescence (PL) and density functional theory (DFT) calculations. Two interlayer excitons with opposite circular polarization assigned to the different transition paths of K-K and Q-K were observed. The nature of the direct (indirect) interlayer exciton was confirmed by circular polarization PL measurement, excitation power-dependent PL measurement and DFT calculations. Furthermore, by applying an external electric field to regulate the band structure of the WSe₂/WS₂ heterostructure and control the transition path of the interlayer excitons, we could successfully realize the regulation of interlayer exciton emission. This study provides more evidence for the twist-angle-based control of heterostructure properties.

Advances in the Field of Two-Dimensional Crystal-Based Photodetectors

Two-dimensional (2D) materials have sparked intense interest among the scientific community owing to their extraordinary mechanical, optical, electronic, and thermal properties. In particular, the outstanding electronic and optical properties of 2D materials make them show great application potential in high-performance photodetectors (PDs), which can be applied in many fields such as high-frequency communication, novel biomedical imaging, national security, and so on. Here, the recent research progress of PDs based on 2D materials including graphene, transition metal carbides, transition-metal dichalcogenides, black phosphorus, and hexagonal boron nitride is comprehensively and systematically reviewed. First, the primary detection mechanism of 2D material-based PDs is introduced. Second, the structure and optical properties of 2D materials, as well as their applications in PDs, are heavily discussed. Finally, the opportunities and challenges of 2D material-based PDs are summarized and prospected. This review will provide a reference for the further application of 2D crystal-based PDs.

All-optical control of high-purity trions in nanoscale waveguide

The generation of high-purity localized trions, dynamic exciton-trion interconversion, and their spatial modulation in two-dimensional (2D) semiconductors are building blocks for the realization of trion-based optoelectronic devices. Here, we present a method for the all-optical control of the exciton-to-trion conversion process and its spatial distributions in a MoS₂ monolayer. We induce a nanoscale strain gradient in a 2D crystal transferred on a lateral metal-insulator-metal (MIM) waveguide and exploit propagating surface plasmon polaritons (SPPs) to localize hot electrons. These significantly increase the electrons and efficiently funnel excitons in the lateral MIM waveguide, facilitating complete exciton-to-trion conversion even at ambient conditions. Additionally, we modulate the SPP mode using adaptive wavefront shaping, enabling all-optical control of the exciton-to-trion conversion rate and trion distribution in a reversible manner. Our work provides a platform for harnessing excitonic quasiparticles efficiently in the form of trions at ambient conditions, enabling high-efficiency photoconversion.

Spatial Control of Substitutional Dopants in Hexagonal Monolayer WS2 : The Effect of Edge Termination

The ability to control the density and spatial distribution of substitutional dopants in semiconductors is crucial for achieving desired physicochemical properties. Substitutional doping with adjustable doping levels has been previously demonstrated in 2D transition metal dichalcogenides (TMDs); however, the spatial control of dopant distribution remains an open field. In this work, edge termination is demonstrated as an important characteristic of 2D TMD monocrystals that affects the distribution of substitutional dopants. Particularly, in chemical vapor deposition (CVD)-grown monolayer WS₂ , it is found that a higher density of transition metal dopants is always incorporated in sulfur-terminated domains when compared to tungsten-terminated domains. Two representative examples demonstrate this spatial distribution control, including hexagonal iron- and vanadium-doped WS₂ monolayers. Density functional theory (DFT) calculations are further performed, indicating that the edge-dependent dopant distribution is due to a strong binding of tungsten atoms at tungsten-zigzag edges, resulting in the formation of open sites at sulfur-zigzag edges that enable preferential dopant incorporation. Based on these results, it is envisioned that edge termination in crystalline TMD monolayers can be utilized as a novel and effective knob for engineering the spatial distribution of substitutional dopants, leading to in-plane hetero-/multi-junctions that display fascinating electronic, optoelectronic, and magnetic properties.

Enhanced Field-Effect Control of Single-Layer WS2 Optical Features by hBN Full Encapsulation

The field-effect control of the electrical and optical properties of two-dimensional (2D) van der Waals semiconductors (vdW) is one important aspect of this novel class of materials. Thanks to their reduced thickness and decreased screening, electric fields can easily penetrate in a 2D semiconductor and thus modulate their charge density and their properties. In literature, the field effect is routinely used to fabricate atomically thin field-effect transistors based on 2D semiconductors. Apart from the tuning of the electrical transport, it has been demonstrated that the field effect can also be used to modulate the excitonic optical emission of 2D transition metal dichalcogenides such as MoS₂ or WSe₂. In this paper, we present some recent experiments on the field-effect control of the optical and excitonic properties of the monolayer WS₂. Using the deterministic transfer of van der Waals materials, we fabricate planar single-layer WS₂ devices contacted by a gold electrode and partially sandwiched between two insulating hexagonal boron nitride (hBN) flakes. Thanks to the planar nature of the device, we can optically access both the hBN encapsulated and the unencapsulated WS₂ regions and compare the field-effect control of the exciton population in the two cases. We find that the encapsulation strongly increases the range of tunability of the optical emission of WS₂, allowing us to tune the photoluminescence emission from excitons-dominated to trions-dominated. We also discuss how the full encapsulation of WS₂ with hBN helps reduce spurious hysteretic effects in the field-effect control of the optical properties, similar to what has been reported for 2D vdW field-effect transistors.

Layer-dependent excitonic valley polarization properties in MoS2-WS2 heterostructures

In this work, we investigate the polarization of the excitonics valley in MoS₂-WS₂ heterostructures using circular polarization-resolved photoluminescence. The valley polarization is the largest (≈28.45%) in the 1L-1L MoS₂-WS₂ heterostructure and the polarizability of A_WS2 decreases as the number of WS₂ layers increases. We further observed a redshift of exciton XMoS₂- in MoS₂-WS₂ heterostructures with the increase of WS₂ layers, which is attributed to the displacement of the MoS₂ band edge, indicating the layer-sensitive optical properties of the MoS₂-WS₂ heterostructure. Our findings shed light on the understanding of exciton behavior in multilayer MoS₂-WS₂ heterostructures that may promote their potential applications in optoelectronic devices.

Enhanced interactions of interlayer excitons in free-standing heterobilayers

Strong, long-range dipole-dipole interactions between interlayer excitons (IXs) can lead to new multiparticle correlation regimes^1,2, which drive the system into distinct quantum and classical phases^2-5, including dipolar liquids, crystals and superfluids. Both repulsive and attractive dipole-dipole interactions have been theoretically predicted between IXs in a semiconductor bilayer^2,6-8, but only repulsive interactions have been reported experimentally so far^3,9-16. This study investigated free-standing, twisted (51°, 53°, 45°) tungsten diselenide/tungsten disulfide (WSe₂/WS₂) heterobilayers, in which we observed a transition in the nature of dipolar interactions among IXs, from repulsive to attractive. This was caused by quantum-exchange-correlation effects, leading to the appearance of a robust interlayer biexciton phase (formed by two IXs), which has been theoretically predicted^6-8 but never observed before in experiments. The reduced dielectric screening in a free-standing heterobilayer not only resulted in a much higher formation efficiency of IXs, but also led to strongly enhanced dipole-dipole interactions, which enabled us to observe the many-body correlations of pristine IXs at the two-dimensional quantum limit. In addition, we firstly observed several emission peaks from moiré-trapped IXs at room temperature in a well-aligned, free-standing WSe₂/WS₂ heterobilayer. Our findings open avenues for exploring new quantum phases with potential for applications in non-linear optics.

Superacid Treatment on Transition Metal Dichalcogenides

Superacids are strong acids with an acidity higher than pure sulfuric acid. Recently, superacid treatment of monolayer transition metal dichalcogenide (TMDC) flakes, such as MoS2 and WS2, has shown a dramatic enhancement of optical properties, such as photoluminescence (PL) intensity. The superacid molecule is bis(trifluoromethane)sulfonimide (TFSI). In this review paper, we summarize and discuss the recent works and the current understanding of the TFSI treatment, and finally, we describe the outlook of the treatment on monolayer TMDCs.

Promoting optoelectronic properties of Cs2AgBiBr6 nanocrystals by formation of heterostructures with BiOCl nanosheets

Lead halide perovskite nanocrystals and their heterostructures have achieved substantial advances in optoelectronics; however, their inherent material instability and lead toxicity have driven research on alternative material systems. Herein, solution-processable heterostructures composed of lead-free double perovskite Cs₂AgBiBr₆ nanocrystals and BiOCl nanosheets were prepared through a colloidal synthesis method. Defect states were present in BiOCl and benefited carrier generation, recombination and transport in Cs₂AgBiBr₆. As a result, the light emission of the Cs₂AgBiBr₆ nanocrystals was greatly enhanced at low temperatures, and the photodetector based on the Cs₂AgBiBr₆/BiOCl heterostructure exhibited a much improved on-off ratio compared to the device based on Cs₂AgBiBr₆ alone. Our work highlights the complex nature and impact of two-dimensional heterostructure assembly on the optoelectronic properties of lead-free double perovskites and demonstrates their great potential toward environmentally friendly optoelectronic devices.

Photoluminescence Induced by Substitutional Nitrogen in Single-Layer Tungsten Disulfide

The electronic and optical properties of two-dimensional materials can be strongly influenced by defects, some of which can find significant implementations, such as controllable doping, prolonged valley lifetime, and single-photon emissions. In this work, we demonstrate that defects created by remote N₂ plasma exposure in single-layer WS₂ can induce a distinct low-energy photoluminescence (PL) peak at 1.59 eV, which is in sharp contrast to that caused by remote Ar plasma. This PL peak has a critical requirement on the N₂ plasma exposure dose, which is strongest for WS₂ with about 2.0% sulfur deficiencies (including substitutions and vacancies) and vanishes at 5.6% or higher sulfur deficiencies. Both experiments and first-principles calculations suggest that this 1.59 eV PL peak is caused by defects related to the sulfur substitutions by nitrogen, even though low-temperature PL measurements also reveal that not all the sulfur vacancies are remedied by the substitutional nitrogen. The distinct low-energy PL peak suggests that the substitutional nitrogen defect in single-layer WS₂ can potentially serve as an isolated artificial atom for creating single-photon emitters, and its intensity can also be used to monitor the doping concentrations of substitutional nitrogen.

Theory of Excitons in Atomically Thin Semiconductors: Tight-Binding Approach

Atomically thin semiconductors from the transition metal dichalcogenide family are materials in which the optical response is dominated by strongly bound excitonic complexes. Here, we present a theory of excitons in two-dimensional semiconductors using a tight-binding model of the electronic structure. In the first part, we review extensive literature on 2D van der Waals materials, with particular focus on their optical response from both experimental and theoretical points of view. In the second part, we discuss our ab initio calculations of the electronic structure of MoS2, representative of a wide class of materials, and review our minimal tight-binding model, which reproduces low-energy physics around the Fermi level and, at the same time, allows for the understanding of their electronic structure. Next, we describe how electron-hole pair excitations from the mean-field-level ground state are constructed. The electron-electron interactions mix the electron-hole pair excitations, resulting in excitonic wave functions and energies obtained by solving the Bethe-Salpeter equation. This is enabled by the efficient computation of the Coulomb matrix elements optimized for two-dimensional crystals. Next, we discuss non-local screening in various geometries usually used in experiments. We conclude with a discussion of the fine structure and excited excitonic spectra. In particular, we discuss the effect of band nesting on the exciton fine structure; Coulomb interactions; and the topology of the wave functions, screening and dielectric environment. Finally, we follow by adding another layer and discuss excitons in heterostructures built from two-dimensional semiconductors.

Enhanced light-matter interaction in two-dimensional transition metal dichalcogenides

Two-dimensional (2D) transition metal dichalcogenide (TMDC) materials, such as MoS₂, WS₂, MoSe₂, and WSe₂, have received extensive attention in the past decade due to their extraordinary electronic, optical and thermal properties. They evolve from indirect bandgap semiconductors to direct bandgap semiconductors while their layer number is reduced from a few layers to a monolayer limit. Consequently, there is strong photoluminescence in a monolayer (1L) TMDC due to the large quantum yield. Moreover, such monolayer semiconductors have two other exciting properties: large binding energy of excitons and valley polarization. These properties make them become ideal materials for various electronic, photonic and optoelectronic devices. However, their performance is limited by the relatively weak light-matter interactions due to their atomically thin form factor. Resonant nanophotonic structures provide a viable way to address this issue and enhance light-matter interactions in 2D TMDCs. Here, we provide an overview of this research area, showcasing relevant applications, including exotic light emission, absorption and scattering features. We start by overviewing the concept of excitons in 1L-TMDC and the fundamental theory of cavity-enhanced emission, followed by a discussion on the recent progress of enhanced light emission, strong coupling and valleytronics. The atomically thin nature of 1L-TMDC enables a broad range of ways to tune its electric and optical properties. Thus, we continue by reviewing advances in TMDC-based tunable photonic devices. Next, we survey the recent progress in enhanced light absorption over narrow and broad bandwidths using 1L or few-layer TMDCs, and their applications for photovoltaics and photodetectors. We also review recent efforts of engineering light scattering, e.g., inducing Fano resonances, wavefront engineering in 1L or few-layer TMDCs by either integrating resonant structures, such as plasmonic/Mie resonant metasurfaces, or directly patterning monolayer/few layers TMDCs. We then overview the intriguing physical properties of different van der Waals heterostructures, and their applications in optoelectronic and photonic devices. Finally, we draw our opinion on potential opportunities and challenges in this rapidly developing field of research.

Enhanced Valley Polarization in WS2 /LaMnO3 Heterostructure

Monolayer transition metal dichalcogenides have attracted great attention for potential applications in valleytronics. However, the valley polarization degree is usually not high because of the intervalley scattering. Here, a largely enhanced valley polarization up to 80% in monolayer WS₂ under nonresonant excitation at 4.2 K is demonstrated using WS₂ /LaMnO₃ thin film heterostructure, which is much higher than that for monolayer WS₂ on SiO₂ /Si substrate with a valley polarization of 15%. Furthermore, the greatly enhanced valley polarization can be maintained to a high temperature of about 160 K with a valley polarization of 53%. The temperature dependence of valley polarization is strongly correlated with the thermomagnetic curve of LaMnO₃ , indicating an exciton-magnon coupling between WS₂ and LaMnO₃ . A simple model is introduced to illustrate the underlying mechanisms. The coupling of WS₂ and LaMnO₃ is further confirmed with an observation of two interlayer excitons with opposite valley polarizations in the heterostructure, resulting from the spin-orbit coupling induced splitting of the conduction bands in monolayer transition metal dichalcogenides. The results provide a pathway to control the valleytronic properties of transition metal dichalcogenides by means of ferromagnetic van der Waals engineering, paving a way to practical valleytronic applications.

One order enhancement of charge carrier relaxation rate by tuning structural and optical properties in annealed cobalt doped MoS2 nanosheets

The effective manipulation of excitons is crucial for the realization of exciton-based devices and circuits, and doping is considered a good strategy to achieve this.

Boosting quantum yields in two-dimensional semiconductors via proximal metal plates

Monolayer transition metal dichalcogenides (1L-TMDs) have tremendous potential as atomically thin, direct bandgap semiconductors that can be used as convenient building blocks for quantum photonic devices. However, the short exciton lifetime due to the defect traps and the strong exciton-exciton interaction in TMDs has significantly limited the efficiency of exciton emission from this class of materials. Here, we show that exciton-exciton interaction in 1L-WS₂ can be effectively screened using an ultra-flat Au film substrate separated by multilayers of hexagonal boron nitride. Under this geometry, induced dipolar exciton-exciton interaction becomes quadrupole-quadrupole interaction because of effective image dipoles formed within the metal. The suppressed exciton-exciton interaction leads to a significantly improved quantum yield by an order of magnitude, which is also accompanied by a reduction in the exciton-exciton annihilation (EEA) rate, as confirmed by time-resolved optical measurements. A theoretical model accounting for the screening of the dipole-dipole interaction is in a good agreement with the dependence of EEA on exciton densities. Our results suggest that fundamental EEA processes in the TMD can be engineered through proximal metallic screening, which represents a practical approach towards high-efficiency 2D light emitters.

The short exciton lifetime and strong exciton-exciton interaction in transition metal dichalcogenides limit the efficiency of exciton emission. Here, the authors show that exciton-exciton interaction in monolayer WS₂ can be screened using proximal metal plates, leading to an improved quantum yield.

Impact of Dark Excitons on the Population and Relaxation Kinetics of Two-Dimensional Biexcitons in [CH3(CH2)3NH3]2Pb1-xMnxBr4 (x = 0-0.09)

Two-dimensional (2D) semiconductors have emerged as an excellent platform for studying various excitonic matter under strong quantum and dielectric confinements. However, such effects can be seriously overestimated for Coulomb binding of two excitons to form a biexciton by a naive interpretation of the corresponding photoluminescence (PL) spectrum. By using 2D halide perovskite single crystals of [CH₃(CH₂)₃NH₃]₂Pb_1-xMn_xBr₄ (x = 0-0.09) as a model system, we investigated both population and relaxation kinetics of biexcitons as a function of excitation density, temperature, polarization, and Mn doping. We show that the biexciton is formed by binding of two dark excitons, which are partially bright, but they radiatively recombine to yield a bright exciton in the final state. This renders the spectral distance between the exciton peak and the biexciton peak as very different from the actual biexciton binding energy (ϕ) because of large bright-dark splitting. We show that Mn doping introduces paramagnetism to our 2D system and improves the biexciton stability as evidenced by increase in ϕ from 18.8 ± 0.7 to 20.0 ± 0.7 meV and the increase of the exciton-exciton capture coefficient C from 2.4 × 10^-11 to 4.3 × 10^-11cm²/ns within our doping range. The precisely determined ϕ values are significantly smaller than the previously reported ones, but they are consistent with the instability of the biexciton against thermal dissociation at room temperature. Our results demonstrate that electron-hole exchange interaction must be considered for precisely locating the biexciton level; therefore, the ϕ values should be reassessed for other 2D halide perovskites that even do not exhibit any dark exciton PL.

Anisotropic Optical and Vibrational Properties of GeS

The optical response of bulk germanium sulfide (GeS) is investigated systematically using different polarization-resolved experimental techniques, such as photoluminescence (PL), reflectance contrast (RC), and Raman scattering (RS). It is shown that while the low-temperature (T = 5 K) optical band-gap absorption is governed by a single resonance related to the neutral exciton, the corresponding emission is dominated by the disorder/impurity- and/or phonon-assisted recombination processes. Both the RC and PL spectra are found to be linearly polarized along the armchair direction. The measured RS spectra over a broad range from 5 to 300 K consist of six Raman peaks identified with the help of Density Functional Theory (DFT) calculations: Ag1, Ag2, Ag3, Ag4, B1g1, and B1g2, which polarization properties are studied under four different excitation energies. We found that the polarization orientations of the Ag2 and Ag4 modes under specific excitation energy can be useful tools to determine the GeS crystallographic directions: armchair and zigzag.

Trion dynamics and charge photogeneration in MoS2 nanosheets prepared by liquid phase exfoliation

Since excitonic quasiparticles, including excitons, trions and charges, have a great influence on the photoelectric characteristics of two-dimensional (2D) transition metal dichalcogenides (TMDs), systematic explorations of the trion dynamics and charge photogeneration in 2D TMDs are important for their future optoelectronic applications. Here, broadband femtosecond transient absorption spectroscopic experiments are performed first to investigate the peak shifting and broadening kinetics in MoS₂ nanosheets in solution prepared by liquid phase exfoliation (LPE-MoS₂, ∼9 layers, 9L), which reveal that the binding energies for the A-, B-, and C-exciton states are ∼77 meV, ∼76 meV, and -70 meV (the energy difference between free charges and excitons; the negative sign for C-excitons means a spontaneous dissociation nature in band-nesting regions), respectively. Then, the trion dynamics and charge photogeneration in LPE-MoS₂ nanosheets have been studied in detail, demonstrating that they are comparable to those in chemical vapor deposition grown MoS₂ films (1L-, 3L- and 7L-MoS₂). These experimental results suggest that LPE-TMD nanosheets also have the potential for use in charge-related optoelectronic devices based on 2D TMDs.

Nonvolatile Electric Control of Exciton Complexes in Monolayer MoSe2 with Two-Dimensional Ferroelectric CuInP2S6

Monolayer transition-metal dichalcogenides (TMDs) have provided a platform to investigate the excitonic states at the two-dimensional (2D) limit. The inherent properties of excitons in TMDs, such as the photoluminescence quantum yield, the charge states, and even the binding energy, can be effectively controlled via electrostatic gating, selective carrier doping, or substrate dielectric engineering. Here, aiming for the nonvolatile electrical tunability of excitonic states and thereby the optical property of TMDs, we demonstrate a 2D ferroelectric heterostructure with monolayer MoSe₂ and ultrathin CuInP₂S₆ (CIPS). In the heterostructure, the electric polarization of CIPS results in continuous, global, and large electronic modulation in monolayer MoSe₂. With the saturated ferroelectric polarization of CIPS, electron-doped or hole-doped MoSe₂ is realized in a single device. The carrier density tunability in the heterostructure is as high as 5 × 10¹² cm^-2. The nonvolatile behavior of these devices up to 3 months is also characterized. Our results provide a new and practical strategy for low-power consumption and agelong tunable optoelectronic devices.

Observation of Strong Valley Magnetic Response in Monolayer Transition Metal Dichalcogenide Alloys of Mo0.5W0.5Se2 and Mo0.5W0.5Se2/WS2 Heterostructures

Monolayer transition metal dichalcogenide (TMD) alloys have emerged as a unique material system for promising applications in electronics, optoelectronics, and spintronics due to their tunable electronic structures, effective masses of carriers, and valley polarization with various alloy compositions. Although spin-orbit engineering has been extensively studied in monolayer TMD alloys, the valley Zeeman effect in these alloys still remains largely unexplored. Here we demonstrate the enhanced valley magnetic response in Mo_0.5W_0.5Se₂ alloy monolayers and Mo_0.5W_0.5Se₂/WS₂ heterostructures probed by magneto-photoluminescence spectroscopy. The large g factors of negatively charged excitons (trions) of Mo_0.5W_0.5Se₂ have been extracted for both pure Mo_0.5W_0.5Se₂ monolayers and Mo_0.5W_0.5Se₂/WS₂ heterostructures, which are attributed to the significant impact of doping-induced strong many-body Coulomb interactions on trion emissions under an out-of-plane magnetic field. Moreover, compared with the monolayer Mo_0.5W_0.5Se₂, the slightly reduced valley Zeeman splitting in Mo_0.5W_0.5Se₂/WS₂ is a consequence of the weakened exchange interaction arising from p-doping in Mo_0.5W_0.5Se₂ via interlayer charge transfer between Mo_0.5W_0.5Se₂ and WS₂. Such interlayer charge transfer further evidences the formation of type-II band alignment, in agreement with the density functional theory calculations. Our findings give insights into the spin-valley and interlayer coupling effects in monolayer TMD alloys and their heterostructures, which are essential to develop valleytronic applications based on the emerging family of TMD alloys.

Highly Enhanced Light-Matter Interaction in MXene Quantum Dots-Monolayer WS2 Heterostructure

Since the Ti₃ C₂ was discovered in 2011, the family of MXenes has attracted much attention. MXenes offer great potential in the tuning of many fundamental properties by the synthesis of new structures. The synthesis methods of MXene mainly require steps including immersing a MAX phase in hydrofluoric acid (HF) and processing at high temperatures. However, the HF may be hard to acquire in many countries and processing at high temperatures may cause risk issues. In this article, a simple and cost-effective synthesis of Ti₃ C₂ T_x quantum dots (QDs) via chemical solution method that follows the long-time magnetic stirring process-initiated etching of Al atoms from commercial Ti₃ AlC₂ powder at room temperature is introduced. With WS₂ monolayer sitting over the MXenes QD arrays, a higher level of photoluminescence (PL) enhancement is found in the heterostructure with increasing laser power at room temperature and a few novel quasi-particles species in the heterostructure at -190 °C. The observations show that the possible plasmonic behavior initiated by QD arrays and the suspension state of WS₂ may coplay the roles to trigger multiple quasi-particles species. This study can be an important benchmark for the extensive understanding of quasi-particles species, and their dynamics.

Growth-Etch Metal-Organic Chemical Vapor Deposition Approach of WS2 Atomic Layers

Metal-organic chemical vapor deposition (MOCVD) is one of the main methodologies used for thin-film fabrication in the semiconductor industry today and is considered one of the most promising routes to achieve large-scale and high-quality 2D transition metal dichalcogenides (TMDCs). However, if special measures are not taken, MOCVD suffers from some serious drawbacks, such as small domain size and carbon contamination, resulting in poor optical and crystal quality, which may inhibit its implementation for the large-scale fabrication of atomic-thin semiconductors. Here we present a growth-etch MOCVD (GE-MOCVD) methodology, in which a small amount of water vapor is introduced during the growth, while the precursors are delivered in pulses. The evolution of the growth as a function of the amount of water vapor, the number and type of cycles, and the gas composition is described. We show a significant domain size increase is achieved relative to our conventional process. The improved crystal quality of WS₂ (and WSe₂) domains wasis demonstrated by means of Raman spectroscopy, photoluminescence (PL) spectroscopy, and HRTEM studies. Moreover, time-resolved PL studies show very long exciton lifetimes, comparable to those observed in mechanically exfoliated flakes. Thus, the GE-MOCVD approach presented here may facilitate their integration into a wide range of applications.

Interface Kinetics Assisted Barrier Removal in Large Area 2D-WS2 Growth to Facilitate Mass Scale Device Production

Growth of monolayer WS2 of domain size beyond few microns is a challenge even today; and it is still restricted to traditional exfoliation techniques, with no control over the dimension. Here, we present the synthesis of mono- to few layer WS2 film of centimeter2 size on graphene-oxide (GO) coated Si/SiO2 substrate using the chemical vapor deposition CVD technique. Although the individual size of WS2 crystallites is found smaller, the joining of grain boundaries due to sp 2-bonded carbon nanostructures (~3-6 nm) in GO to reduced graphene-oxide (RGO) transformed film, facilitates the expansion of domain size in continuous fashion resulting in full coverage of the substrate. Another factor, equally important for expanding the domain boundary, is surface roughness of RGO film. This is confirmed by conducting WS2 growth on Si wafer marked with few scratches on polished surface. Interestingly, WS2 growth was observed in and around the rough surface irrespective of whether polished or unpolished. More the roughness is, better the yield in crystalline WS2 flakes. Raman mapping ascertains the uniform mono-to-few layer growth over the entire substrate, and it is reaffirmed by photoluminescence, AFM and HRTEM. This study may open up a new approach for growth of large area WS2 film for device application. We have also demonstrated the potential of the developed film for photodetector application, where the cycling response of the detector is highly repetitive with negligible drift.

Effects of dielectric screening on the excitonic and critical points properties of WS2/MoS2 heterostructures

Vertical van der Waals heterostructures have aroused great attention for their promising application in next-generation nanoelectronic and optoelectronic devices. The dielectric screening effect plays a key role in the properties of two-dimensional (2D) heterostructures. Here, we studied the dielectric screening effects on the excitonic properties and critical points (CPs) of the WS2/MoS2 heterostructure using spectroscopic ellipsometry (SE). Owing to the type-II band alignment of the WS2/MoS2 heterostructure, charged carriers spatially separated and created an interlayer exciton, and the transition energy and binding energy have been accurately found to be 1.58 ± 0.050 eV and 431.39 ± 127.818 meV by SE, respectively. We found that stacking the WS2/MoS2 vertical heterostructure increases the effective dielectric screening compared with the monolayer counterparts. The increased effective dielectric screening in the WS2/MoS2 heterostructure weakens the long-range Coulomb force between electrons and holes. Consequently, the quasi-particle band gap and the exciton binding energies are reduced, and because of the orbital overlap, more CPs are produced in the WS2/MoS2 heterostructure in the high photon energy range. Our results not only shed light on the interpretation of recent first-principles studies, but also provide important physical support for improving the performance of heterostructure-based optoelectronic devices with tunable functionalities.

Mechanisms and Applications of Steady-State Photoluminescence Spectroscopy in Two-Dimensional Transition-Metal Dichalcogenides

Two-dimensional (2D) transition-metal dichalcogenide (TMD) semiconductors exhibit many important structural and optoelectronic properties, such as strong light-matter interactions, direct bandgaps tunable from visible to near-infrared regions, flexibility and atomic thickness, quantum-confinement effects, valley polarization possibilities, and so on. Therefore, they are regarded as a very promising class of materials for next-generation state-of-the-art nano/micro optoelectronic devices. To explore different applications and device structures based on 2D TMDs, intrinsic material properties, their relationships, and evolutions with fabrication parameters need to be deeply understood, very often through a combination of various characterization techniques. Among them, steady-state photoluminescence (PL) spectroscopy has been extensively employed. This class of techniques is fast, contactless, and nondestructive and can provide very high spatial resolution. Therefore, it can be used to obtain optoelectronic properties from samples of various sizes (from microns to centimeters) during the fabrication process without complex sample preparation. In this article, the mechanism and applications of steady-state PL spectroscopy in 2D TMDs are reviewed. The first part of this review details the physics of PL phenomena in semiconductors and common techniques to acquire and analyze PL spectra. The second part introduces various applications of PL spectroscopy in 2D TMDs. Finally, a broader perspective is discussed to highlight some limitations and untapped opportunities of PL spectroscopy in characterizing 2D TMDs.

2D Nanomaterial-Based Surface Plasmon Resonance Sensors for Biosensing Applications

The absorption and binding energy of material plays an important role with a large surface area and conductivity for the development of any sensing device. The newly grown 2D nanomaterials like black phosphorus transition metal dichalcogenides (TMDCs) or graphene have excellent properties for sensing devices' fabrication. This paper summarizes the progress in the area of the 2D nanomaterial-based surface plasmon resonance (SPR) sensor during last decade. The paper also focuses on the structure of Kretschmann configuration, the sensing principle of SPR, its characteristic parameters, application in various fields, and some important recent works related to SPR sensors have also been discussed, based on the present and future scope of this field. The present paper provides a platform for researchers to work in the field of 2D nanomaterial-based SPR sensors.

Correlated Exciton Fluctuations in a Two-Dimensional Semiconductor on a Metal

Excitons in nanoscale materials can exhibit fluorescence fluctuations. Intermittency is pervasive in zero-dimensional emitters such as single molecules and quantum dots. In contrast, two-dimensional semiconductors are generally regarded as stable light sources. Noise contains, however, valuable information about a material. Here, we demonstrate fluorescence fluctuations in a monolayer semiconductor due to sensitivity to its nanoscopic environment focusing on the case of a metal film. The fluctuations are spatially correlated over tens of micrometers and follow power-law statistics, with simultaneous changes in emission intensity and lifetime. At low temperatures, an additional spectral contribution from interface trap states emerges with fluctuations that are correlated with neutral excitons and anticorrelated with trions. Mastering exciton fluctuations has implications for light-emitting devices such as single-photon sources and could lead to novel excitonic sensors. The quantification of fluorescence fluctuations, including imaging, unlocks a set of promising tools to characterize and exploit two-dimensional semiconductors and their interfaces.

Robust room temperature emissions of trion in darkish WSe2monolayers: effects of dark neutral and charged excitonic states

Owing to nonzero charge and spin degrees of freedom, trions offer unprecedented tunability and open new paths for applications in devices based on 2D semiconductors. However, in monolayer WSe2, the trion photoluminescence is commonly detected only at low temperatures and vanishes at room temperature, which undermines practical applications. To unveil how to overcome this obstacle, we have developed a comprehensive theory to probe the impact of different excitonic channels on the trion emission in WSe2monolayers, which combinesab initiotight-binding formalism, Bethe-Salpeter equation and a set of coupled rate equations to describe valley dynamics of excitonic particles. Through a systematic study in which new scattering channels are progressively included, we found that, besides the low electron density, strong many-body correlations between bright and dark excitonic states quenches the trion emission in WSe2. Therefore, the reduction of scatterings from bright to dark states is required to achieve trion emission at room temperature for experimentally accessible carrier concentrations.

Disentangling oxygen and water vapor effects on optoelectronic properties of monolayer tungsten disulfide

By understanding how the environmental composition impacts the optoelectronic properties of transition metal dichalcogenide monolayers, we demonstrate that simple photoluminescence (PL) measurements of tungsten disulfide (WS₂) monolayers can differentiate relative humidity environments. In this paper, we examine the PL and photoconductivity of chemical vapor deposition grown WS₂ monolayers under three carefully controlled environments: inert gas (N₂), dry air (O₂ in N₂), and humid nitrogen (H₂O vapor in N₂). The WS₂ PL is measured as a function of 532 nm laser power and exposure time and can be decomposed into the exciton, trion, and lower energy state(s) contributions. Under continuous illumination in either O₂ or H₂O vapor environment, we find dramatic (and reversible) increases in PL intensity relative to the PL in an inert environment. The PL bathochromically shifts in an O₂ environment and is dominated by increased trion emission and diminished exciton emission. In contrast, the WS₂ PL increase in a H₂O environment results from an overall increase in emission from all spectral components where the exciton contribution dominates. The drastic increases in PL are anticorrelated with corresponding decreases in photoconductivity, as measured by time-resolved microwave conductivity. The results suggest that both O₂ and H₂O react photochemically with the WS₂ monolayer surface, modifying the optoelectronic properties, but do so via distinct pathways. Thus, we use these optoelectronic differences to differentiate the amount of humidity in the air, which we show with 0%, 40%, and 80% relative humidity environments. This deeper understanding of how ambient conditions impact WS₂ monolayers enables novel humidity sensors as well as a better understanding of the correlation between TMDC surface chemistry, light emission, and photoconductivity. Moreover, these WS₂ measurements highlight the importance of considering the impact of the local environment on reported results.

Excitonic complexes and optical gain in two-dimensional molybdenum ditelluride well below the Mott transition

Semiconductors that can provide optical gain at extremely low carrier density levels are critically important for applications such as energy efficient nanolasers. However, all current semiconductor lasers are based on traditional semiconductor materials that require extremely high density levels above the so-called Mott transition to realize optical gain. The new emerging 2D materials provide unprecedented opportunities for studying new excitonic physics and exploring new optical gain mechanisms at much lower density levels due to the strong Coulomb interaction and co-existence and mutual conversion of excitonic complexes. Here, we report a new gain mechanism involving charged excitons or trions in electrically gated 2D molybdenum ditelluride well below the Mott density. Our combined experimental and modelling study not only reveals the complex interplay of excitonic complexes well below the Mott transition but also establishes 2D materials as a new class of gain materials at densities 4-5 orders of magnitude lower than those of conventional semiconductors and provides a foundation for lasing at ultralow injection levels for future energy efficient photonic devices. Additionally, our study could help reconcile recent conflicting results on 2D materials: While 2D material-based lasers have been demonstrated at extremely low densities with spectral features dominated by various excitonic complexes, optical gain was only observed in experiments at densities several orders of magnitude higher, beyond the Mott density. We believe that our results could lead to more systematic studies on the relationship between the mutual conversion of excitonic species and the existence of optical gain well below the Mott transition.

Remarkable quality improvement of as-grown monolayer MoS2 by sulfur vapor pretreatment of SiO2/Si substrates

Monolayer MoS2 is a direct bandgap semiconductor which is believed to be one of the most promising candidates for optoelectronic devices. Chemical vapor deposition (CVD) is the most popular method to synthesize monolayer MoS2 with a large area. However, many defects are always found in monolayer MoS2 grown by CVD, such as sulfur vacancies, which severely degrade the performance of devices. This work demonstrates a concise and effective method for direct growth of high quality monolayer MoS2 by using SiO2/Si substrates pretreated with sulfur vapor. The MoS2 monolayer obtained using this method shows about 20 times PL intensity enhancement and a much narrower PL peak width than that grown on untreated substrates. Detailed characterization studies reveal that MoS2 grown on sulfur vapor pretreated SiO2/Si substrates has a much lower density of sulfur vacancies. The synthesis of monolayer MoS2 with high optical quality and low defect concentration is critical for both fundamental physics studies and potential practical device applications in the atomically thin limit.

Valley polarization of singlet and triplet trions in a WS2 monolayer in magnetic fields

Magnetic field induced valley polarization of carriers is substantially different for the absorption and emission response of a WS₂ monolayer.

Momentum-Dark Intervalley Exciton in Monolayer Tungsten Diselenide Brightened via Chiral Phonon

Inversion symmetry breaking and 3-fold rotation symmetry grant the valley degree of freedom to the robust exciton in monolayer transition-metal dichalcogenides, which can be exploited for valleytronics applications. However, the short lifetime of the exciton significantly constrains the possible applications. In contrast, the dark exciton could be long-lived but does not necessarily possess the valley degree of freedom. In this work, we report the identification of the momentum-dark, intervalley exciton in monolayer WSe₂ through low-temperature magneto-photoluminescence spectra. Interestingly, the intervalley exciton is brightened through the emission of a chiral phonon at the corners of the Brillouin zone (K point), and the pseudoangular momentum of the phonon is transferred to the emitted photon to preserve the valley information. The chiral phonon energy is determined to be ∼23 meV, based on the experimentally extracted exchange interaction (∼7 meV), in excellent agreement with the theoretical expectation of 24.6 meV. The long-lived intervalley exciton with valley degree of freedom adds an exciting quasiparticle for valleytronics, and the coupling between the chiral phonon and intervalley exciton furnishes a venue for valley spin manipulation.

Theoretical investigation of the vertical dielectric screening dependence on defects for few-layered van der Waals materials

First-principle calculations were employed to analyze the effects induced by vacancies of molybdenum (Mo) and sulfur (S) on the dielectric properties of few-layered MoS2. We explored the combined effects of vacancies and dipole interactions on the dielectric properties of few-layered MoS2. In the presence of dielectric screening, we investigated uniformly distributed Mo and S vacancies, and then considered the case of concentrated vacancies. Our results show that the dielectric screening remarkably depends on the distribution of vacancies owing to the polarization induced by the vacancies and on the interlayer distances. This conclusion was validated for a wide range of wide-gap semiconductors with different positions and distributions of vacancies, providing an effective and reliable method for calculating and predicting electrostatic screening of dimensionally reduced materials. We further provided a method for engineering the dielectric constant by changing the interlayer distance, tuning the number of vacancies and the distribution of vacancies in few-layered van der Waals materials for their application in nanodevices and supercapacitors.

Redox-governed charge doping dictated by interfacial diffusion in two-dimensional materials

Controlling extra charge carriers is pivotal in manipulating electronic, optical, and magnetic properties of various two-dimensional materials. Nonetheless, the ubiquitous hole doping of two-dimensional materials in the air and acids has been controversial in its mechanistic details. Here we show their common origin is an electrochemical reaction driven by redox couples of oxygen and water molecules. Using real-time photoluminescence imaging of WS₂ and Raman spectroscopy of graphene, we capture molecular diffusion through the two-dimensional nanoscopic space between two-dimensional materials and hydrophilic substrates, and show that the latter accommodate water molecules also serving as a hydrating solvent. We also demonstrate that HCl-induced doping is governed by dissolved O₂ and pH in accordance with the Nernst equation. The nanoscopic electrochemistry anatomized in this work sets an ambient limit to material properties, which is universal to not only 2D but also other forms of materials.

Manipulation of charge carriers is promising for tuning electronic, optical and magnetic properties in two-dimensional materials, but mechanistic details are not fully understood. Here, the authors report that ambient redox reactions govern charge transfer doping in graphene and tungsten disulfide.

Triboelectrification of Two-Dimensional Chemical Vapor Deposited WS2 at Nanoscale

Triboelectric properties of chemical vapor deposited WS₂ nanoflakes have been characterized in nano-range by atomic force microscopy (AFM) and Kelvin force microscopy (KFM). The triboelectric process is dependent on the thickness of WS₂ nanoflakes, and it is sensitive to the adsorbates like water molecules, as well as transferred Pt from the tip on the sample. The density of tribo-charge can be modified by applying various biases to the conductive Pt-coated tip during the frictional process. Tunneling of the tribo-charge into the gap between WS₂ and the underlying substrate results in a long lifetime, which is about 100 times longer than conventional triboelectric charges. Moreover, we observe a positive correlation between the layer number and resistance to charge dissipation. Our finding can become the driving force for a new category of two-dimensional (2D) WS₂ triboelectrically controllable nanodevices.

Interface charge-transfer induced intralayer excited-state biexcitons in graphene/WS2 van der Waals heterostructures

Monolayer transition metal dichalcogenides (TMDCs) are an ideal platform for multi-carrier bound states, the excitons and trions of which have been well identified and investigated. However, the formation and identification of biexcitons with certain configurations are more complicated. Here, we report a strategy to generate the hole-trion bound state, i.e. excited-state biexcitons, in a graphene/WS₂ van der Waals heterostructure, the formation of which is attributed to the charge transfer and exciton dissociation at the hetero-interface. The biexciton nature is confirmed by excitation-power dependent, helicity-resolved, and time-resolved photoluminescence measurements. This hole-trion bound state features a thermal activation energy of ∼32 meV, rendering a stable excited-state biexciton emission up to 330 K. Moreover, the emission behavior of the excited-state biexcitons can be tuned by modifying the charge transfer process at the hetero-interface via electrostatic gating. Our results will benefit to further understanding the complex multi-carrier interactions in 2D semiconductors and related heterostructures.

Trion-Induced Distinct Transient Behavior and Stokes Shift in WS2 Monolayers

Understanding the excitonic behavior in two-dimensional transition-metal dichalcogenides (2D TMDs) is of both fundamental interest and critical importance for optoelectronic applications. Here, we investigate the transient excitonic behavior and Stokes shift in WS₂ monolayers on both sapphire and glass substrates. Trion formation was confirmed as the origin of the distinct photoluminescence (PL) emission and Stokes shift in WS₂ monolayers. Moreover, the transient studies demonstrate faster recombination of both the exciton and the short-lived trion on the glass substrate as compared to that on the sapphire substrate, owing to the heavier n-doping and greater number of defects introduced by the glass substrate. In addition, a long-lived trion species attributed to the intervalley triplet trion was observed on the glass substrate, with a lifetime on the nanosecond time scale. These findings offer a comprehensive understanding of the excitonic behavior and Stokes shift in WS₂ monolayers and will lay the foundation for further fundamental investigations in the field.

Tunable Control of Interlayer Excitons in WS2/MoS2 Heterostructures via Strong Coupling with Enhanced Mie Resonances

Strong Coulomb interactions in monolayer transition metal dichalcogenides (TMDs) produce strongly bound excitons, trions, and biexcitons. The existence of multiexcitonic states has drawn tremendous attention because of its promising applications in quantum information. Combining different monolayer TMDs into van der Waals (vdW) heterostructures opens up opportunities to engineer exciton devices and bring new phenomena. Spatially separated electrons and holes in different layers produce interlayer excitons. Although much progress has been made on excitons in single layers, how interlayer excitons contribute the photoluminescence emission and how to tailor the interlayer exciton emission have not been well understood. Here, room temperature strong coupling between interlayer excitons in the WS2/MoS2 vdW heterostructure and cavity-enhanced Mie resonances in individual silicon nanoparticles (Si NPs) are demonstrated. The heterostructures are inserted into a Si film-Si NP all-dielectric platform to realize effective energy exchanges and Rabi oscillations. Besides mode splitting in scattering, tunable interlayer excitonic emission is also observed. The results make it possible to design TMDs heterostructures with various excitonic states for future photonics devices.

Quantifying Quasi-Fermi Level Splitting and Mapping its Heterogeneity in Atomically Thin Transition Metal Dichalcogenides

One of the most fundamental parameters of any photovoltaic material is its quasi-Fermi level splitting (∆µ) under illumination. This quantity represents the maximum open-circuit voltage (V_oc ) that a solar cell fabricated from that material can achieve. Herein, a contactless, nondestructive method to quantify this parameter for atomically thin 2D transition metal dichalcogenides (TMDs) is reported. The technique is applied to quantify the upper limits of V_oc that can possibly be achieved from monolayer WS₂ , MoS₂ , WSe₂ , and MoSe₂ -based solar cells, and they are compared with state-of-the-art perovskites. These results show that V_oc values of ≈1.4, ≈1.12, ≈1.06, and ≈0.93 V can be potentially achieved from solar cells fabricated from WS₂ , MoS₂ , WSe₂ , and MoSe₂ monolayers at 1 Sun illumination, respectively. It is also observed that ∆µ is inhomogeneous across different regions of these monolayers. Moreover, it is attempted to engineer the observed ∆µ heterogeneity by electrically gating the TMD monolayers in a metal-oxide-semiconductor structure that effectively changes the doping level of the monolayers electrostatically and improves their ∆µ heterogeneity. The values of ∆µ determined from this work reveal the potential of atomically thin TMDs for high-voltage, ultralight, flexible, and eye-transparent future solar cells.

Dynamical screening in monolayer transition-metal dichalcogenides and its manifestations in the exciton spectrum

Monolayer transition-metal dichalcogenides (ML-TMDs) offer exciting opportunities to test the manifestations of many-body interactions through changes in the charge density. The two-dimensional character and reduced screening in ML-TMDs lead to the formation of neutral and charged excitons with binding energies orders of magnitude larger than those in conventional bulk semiconductors. Tuning the charge density by a gate voltage leads to profound changes in the optical spectra of excitons in ML-TMDs. On the one hand, the increased screening at large charge densities should result in a blueshift of the exciton spectral lines due to reduction in the binding energy. On the other hand, exchange and correlation effects that shrink the band-gap energy at elevated charge densities (band-gap renormalization) should result in a redshift of the exciton spectral lines. While these competing effects can be captured through various approximations that model long-wavelength charge excitations in the Bethe-Salpeter equation, we show that a novel coupling between excitons and shortwave charge excitations is essential to resolve several experimental puzzles. Unlike ubiquitous and well-studied plasmons, driven by collective oscillations of the background charge density in the long-wavelength limit, we discuss the emergence of shortwave plasmons that originate from the short-range Coulomb interaction through which electrons transition between the [Formula: see text] and [Formula: see text] valleys. The shortwave plasmons have a finite energy-gap because of the removal of spin-degeneracy in both the valence- and conduction-band valleys (a consequence of breaking of inversion symmetry in combination with strong spin-orbit coupling in ML-TMDs). We study the coupling between the shortwave plasmons and the neutral exciton through the self-energy of the latter. We then elucidate how this coupling as well as the spin ordering in the conduction band give rise to an experimentally observed optical sideband in electron-doped W-based MLs, conspicuously absent in electron-doped Mo-based MLs or any hole-doped ML-TMDs. While the focus of this review is on the optical manifestations of many-body effects in ML-TMDs, a systematic description of the dynamical screening and its various approximations allow one to revisit other phenomena, such as nonequilibrium transport or superconducting pairing, where the use of the Bethe-Salpeter equation or the emergence of shortwave plasmons can play an important role.