Picomolar detection of protease using peptide/single walled carbon nanotube/gold nanoparticle-modified electrode

A novel ACE2-Based electrochemical biosensor for sensitive detection of SARS-CoV-2

SARS-CoV-2 emerged in late 2019 and quickly spread globally, resulting in significant morbidity, mortality, and socio-economic disruptions. As of now, collaborative global efforts in vaccination and the advent of novel diagnostic tools have considerably curbed the spread and impact of the virus in many regions. Despite this progress, the demand remains for low-cost, accurate, rapid and scalable diagnostic tools to reduce the influence of SARS-CoV-2. Herein, the angiotensin-converting enzyme 2 (ACE2), a receptor for SARS-CoV-2, was immobilized on two types of electrodes, a screen-printed gold electrode (SPGE) and a screen-printed carbon electrode (SPCE), to develop electrochemical biosensors for detecting SARS-CoV-2 with high sensitivity and selectivity. This was achieved by using 1H, 1H, 2H, 2H-perfluorodecanethiol (PFDT) and aryl diazonium salt serving as linkers for SPGEs and SPCEs, respectively. Once SARS-CoV-2 was anchored onto the ACE2, the interaction of the virus with the redox probe was analyzed using electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). Aryl diazonium salt was observed as a superior linker compared to PFDT due to its consistent performance in the modification of the SPCEs and effective ACE2 enzyme immobilization. A distinct pair of redox peaks in the cyclic voltammogram of the biosensor modified with aryl diazonium salt highlighted the redox reaction between the functional groups of SARS-CoV-2 and the redox probe. The sensor presented a linear relationship between the redox response and the logarithm of SARS-CoV-2 concentration, with a detection limit of 1.02 × 106 TCID50/mL (50% tissue culture infectious dose). Furthermore, the biosensor showed remarkable selectivity towards SARS-CoV-2 over H1N1virus.

Peptide-based self-assembled monolayers (SAMs): what peptides can do for SAMs and vice versa

Self-assembled monolayers (SAMs) represent highly ordered molecular materials with versatile biochemical features and multidisciplinary applications. Research on SAMs has made much progress since the early begginings of Au substrates and alkanethiols, and numerous examples of peptide-displaying SAMs can be found in the literature. Peptides, presenting increasing structural complexity, stimuli-responsiveness, and biological relevance, represent versatile functional components in SAMs-based platforms. This review examines the major findings and progress made on the use of peptide building blocks displayed as part of SAMs with specific functions, such as selective cell adhesion, migration and differentiation, biomolecular binding, advanced biosensing, molecular electronics, antimicrobial, osteointegrative and antifouling surfaces, among others. Peptide selection and design, functionalisation strategies, as well as structural and functional characteristics from selected examples are discussed. Additionally, advanced fabrication methods for dynamic peptide spatiotemporal presentation are presented, as well as a number of characterisation techniques. All together, these features and approaches enable the preparation and use of increasingly complex peptide-based SAMs to mimic and study biological processes, and provide convergent platforms for high throughput screening discovery and validation of promising therapeutics and technologies.

Semi-quantification and Potency Verification of the HIV Protease Inhibitor Based on the Matrix-Capsid Protein Immobilized Nickel (II)/NTA-Tol/Graphene Oxide/SPCE Electrochemical Biosensor

Human immunodeficiency virus (HIV) causing acquired immune deficiency syndrome (AIDS) is still a global issue. Long-term drug treatment and nonadherence to medication increase the spread of drug-resistant HIV strains. Therefore, the identification of new lead compounds is being investigated and is highly desirable. Nevertheless, a process generally necessitates a significant budget and human resources. In this study, a simple biosensor platform for semi-quantification and verification of the potency of HIV protease inhibitors (PIs) based on electrochemically detecting the cleavage activity of the HIV-1 subtype C-PR (C-SA HIV-1 PR) was proposed. An electrochemical biosensor was fabricated by immobilizing His6-matrix-capsid (H₆MA-CA) on the electrode surface via the chelation to Ni²⁺-nitrilotriacetic acid (NTA) functionalized GO. The functional groups and the characteristics of modified screen-printed carbon electrodes (SPCE) were characterized by Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS). C-SA HIV-1 PR activity and the effect of PIs were validated by recording changes in electrical current signals of the ferri/ferrocyanide redox probe. The detection of PIs, i.e., lopinavir (LPV) and indinavir (IDV), toward the HIV protease was confirmed by the decrease in the current signals in a dose-dependent manner. In addition, our developed biosensor demonstrates the ability to distinguish the potency of two PIs to inhibit C-SA HIV-1 PR activities. We anticipated that this low-cost electrochemical biosensor would increase the efficiency of the lead compound screening process and accelerate the discovery and development of new HIV drugs.

Recent Advances in Transition-Metal-Catalyzed C-H Functionalization of Ferrocene Amides

During the past decades, in synthetic organic chemistry, directing-group-assisted C-H functionalization is found to be a key tool for the expedient and site-selective construction of C-C and hybrid bonds. Among C-H functionalization of ferrocene derivatives, the directed group strategy is undoubtedly the most commonly used method. Compared to the other directing groups, ferrocene amides can be synthesized easily and are now recognized as one of the most efficient devices for the selective functionalization of certain positions because its metal centre permits fine, tuneable and reversible coordination. The family of amide directing groups mainly comprises monodentate and bidentate directing groups, which are categorized on the basis of coordination sites. In this review, various C-H bond functionalization reactions of ferrocene using amide directing groups are broadly discussed.

Applications of scaffold-based advanced materials in biomedical sensing

There have been many efforts to synthesize advanced materials that are capable of real-time specific recognition of a molecular target, and allow the quantification of a variety of biomolecules. Scaffold materials have a porous structure, with a high surface area and their intrinsic nanocavities can accommodate cells and macromolecules. The three-dimensional structure (3D) of scaffolds serves not only as a fibrous structure for cell adhesion and growth in tissue engineering, but can also provide the controlled release of drugs and other molecules for biomedical applications. There has been a limited number of reports on the use of scaffold materials in biomedical sensing applications. This review highlights the potential of scaffold materials in the improvement of sensing platforms and summarizes the progress in the application of novel scaffold-based materials as sensor, and discusses their advantages and limitations. Furthermore, the influence of the scaffold materials on the monitoring of infectious diseases such as severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and bacterial infections, was reviewed.

Electrochemical detection of miRNA-100 in the sera of gastric cancer patients based on DSN-assisted amplification

Gastric cancer (GC) is a common malignant digestive tract tumor that leads to high mortality worldwide. Early diagnosis of GC is very important for adequate treatment. However, a rapid, specific and sensitive method for the detection of GC is currently not available. Here, a biosensor CPs/AuNP-AuE, the gold nanoparticle (AuNP)-modified Au electrode (AuE) which was coupled with DNA capture probes (CPs), was developed to detect the content of miR-100 in the sera of GC patients. The results showed that AuNPs were uniformly deposited on the surface of AuE. AuNPs enhanced the electrical conductivity and improved the effective area of AuE. CPs were successfully assembled on AuNP-AuE that could be digested by duplex-specific nuclease (DSN) from the miR-100/CPs complex on the electrode, improving the sensitivity of the biosensor by recycling miR-100. The data revealed that the biosensor was highly specific for the detection of miR-100, which had the ability to distinguish one base-pair mistake in miR-100. The detection of the biosensor for miR-100 ranged from 100 aM to 10 pM and the limit of detection (LOD) was estimated to be 100 aM. The detection results of 100 human sera samples using this biosensor indicated that the cutoff for the detection of gastric cancer was 5 fM. Therefore the biosensor developed in our study served as a rapid, specific and sensitive strategy for the detection of gastric cancer in clinic.

Novel Method for the Quantitative Analysis of Protease Activity: The Casein Plate Method and Its Applications

No simple methods are used for the quantitative analysis of the protease activity in colored food up till now. Thus, this study aims to establish a new and simple method for the quantitative detection of protease activity, especially in colored food. The detection accuracy, detection limit, and repeatability of the casein plate method were analyzed. Then, the application of the casein plate method in sample detection and recovery was further evaluated. The results showed that the casein plate method for the quantitative detection of protease activity has high accuracy, high precision, and low detection limit. The recoveries of eight kinds of colored samples were in the range of 92.26-97.84%, and the relative standard deviation (RSD) was in the range of 3.56-10.88%. The results of the casein plate method exhibited high accuracy. This indicated that the method was suitable for the detection of colored samples. The casein plate method for the quantitative detection of protease activity is simple. The newly constructed casein plate method has broad potential application value in food industry, especially for the detection of dark food.

A new hybrid nanocomposite electrode based on Au/CeO2-decorated functionalized glassy carbon microspheres for the voltammetric sensing of quercetin and its interaction with DNA

A new hybrid composite containing cerium oxide nanoparticle (CeO2NP) and gold nanoparticle (AuNP)-decorated functionalized glassy carbon microspheres (FGCM) was synthesized (Au/CeO2@FGCM). As a result, an Au/CeO2@FGCM-paraffin oil paste electrode (PE) (Au/CeO2@FGCM-PE) was fabricated and employed for the voltammetric sensing of quercetin (QRT). The structure and surface morphology of Au/CeO2@FGCM were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Cyclic voltammetry (CV), square wave voltammetry (SWV) and electrochemical impedance spectroscopy (EIS) were employed for the investigation of the electrochemical behavior of Au/CeO2@FGCM-PE. Under the optimum conditions, the SWV oxidation peak current showed linear dependence on the QRT concentration in the range from 48 nM to 1.09 μM. The achieved limits of detection and quantitation were 0.37 nM and 1.22 nM, respectively. Au/CeO2@FGCM-PE was reproducible, sensitive and stable and displayed anti-interference ability for various common interferents. The proposed method was also successfully applied for real sample analysis. The QRT content extracted from natural sources was determined, and satisfactory results were achieved. Furthermore, the interaction of QRT with salmon testes and calf thymus dsDNA (st-DNA and ct-DNA) on Au/CeO2@FGCM-PE was studied by CV and SWV. The corresponding binding constant (K), surface concentration (Γ), and Gibbs free energy (ΔG°) were computed for the free QRT and the bound QRT-dsDNA complex. The calculated K values for the QRT-ct-DNA and QRT-st-DNA complexes were found to be 6.24 × 105 M-1 and 3.63 × 105 M-1, respectively, which revealed that QRT strongly interacted with ct-DNA compared to that with st-DNA. The decreased intensity of the QRT oxidation peak resulting from its interaction with dsDNA provides a chance to use QRT as a new indicator to analyze ct-DNA and st-DNA.

Graphene oxide-based biosensing platform for rapid and sensitive detection of HIV-1 protease

HIV-1 protease is essential for the life cycle of the human immunodeficiency virus (HIV), and is one of the most important clinical targets for antiretroviral therapies. In this work, we developed a graphene oxide (GO)-based fluorescence biosensing platform for the rapid, sensitive, and accurate detection of HIV-1 protease, in which fluorescent-labeled HIV-1 protease substrate peptide molecules were covalently linked to GO. In the absence of HIV-1 protease, fluorescein was effectively quenched by GO. In contrast, in the presence of HIV-1 protease, it would cleave the substrate peptide into short fragments, thus producing fluorescence. Based on this sensing strategy, HIV-1 protease could be detected at as low as 1.18 ng/mL. More importantly, the sensor could successfully detect HIV-1 protease in human serum. Such GO-based fluorescent sensors may find useful applications in many fields, including diagnosis of protease-related diseases, as well as sensitive and high-throughput screening of drug candidates. Graphical abstract ᅟ.

High-Performance Biosensing Systems Based on Various Nanomaterials as Signal Transducers

Recently, highly sensitive and selective biosensors have become necessary for improving public health and well-being. To fulfill this need, high-performance biosensing systems based on various nanomaterials, such as nanoparticles, carbon nanomaterials, and hybrid nanomaterials, are developed. Numerous nanomaterials show excellent physical properties, including plasmonic, magnetic, catalytic, mechanical and fluorescence properties and high electrical conductivities, and these unique and beneficial properties have contributed to the fabrication of high-performance biosensors with various applications, including in optical, electrical, and electrochemical detection platforms. In addition, these properties can be transformed to signals for the detection of biomolecules. In this review, various types of nanomaterial-based biosensors are introduced, and they show high sensitivity and selectivity. In addition, the potential applications of these sensors on the biosensing of several types of biomolecules are also discussed. These nanomaterials-based biosensing systems provide a significant improvement on healthcare including rapid monitoring and early detection of infectious disease for public health.

Implementation and new insights in molecular diagnostics for HIV infection

INTRODUCTION

Acquired immunodeficiency syndrome (AIDS) is a kind of acquired disease that breaks down the immune system. Human immunodeficiency virus (HIV) is the causative agent of AIDS. By the end of 2016, there were 36.7 million people living with HIV worldwide. Early diagnosis can alert infected individuals to risk behaviors in order to control HIV transmission. Infected individuals are also benefited from proper treatment and management upon early diagnosis. Thanks to the public awareness of the disease, the annual increase of new HIV infections has been slowly declining over the past decades. The advent of molecular diagnostics has allowed early detection and better management of HIV infected patients. Areas covered: In this review, the authors summarized and discussed the current and future technologies in molecular diagnosis as well as the biomarkers developed for HIV infection. Expert Commentary: A simple and rapid detection of viral load is important for patients and doctors to monitor HIV progression and antiretroviral treatment efficiency. In the near future, it is expected that new technologies such as digital PCR and CRISPR-based technology will play more important role in HIV detection and patient management.

Silver triangular nanoplates as an high efficiently FRET donor-acceptor of upconversion nanoparticles for ultrasensitive "Turn on-off" protamine and trypsin sensor

Silver triangular nanoplates (STNPs) as a high efficient fluorescence quenching reagent of upconversion nanoparticles (UCNPs) was used to constract a novel label-free fluorescence nanosensor for ultrasensitive detection of protamine and trypsin based on fluorescence resonance energy transfer (FRET) between STNPs and UCNPs. In this assay, the negatively charged STNPs can bind with positively charged UCNPs through electrostatic interaction, and then quenched the fluorescence of UCNPs. When protamine was added to the mixture of UCNPs-STNPs, the STNPs interacted with protamine and then detached from the surface of UCNPs and aggregated, which result in the recovery of the fluorescence of UCNPs. Trypsin could catalyze the hydrolysis of protamine and effectively quench the fluorescence recovered by protamine. By measuring the changes of the fluorescence of UCNPs, the concentrations of protamine and trypsin were determined. Under the optimized conditions, the linear response range was obtained from 10 to 500ng/mL, 5-80ng/mL and with the low detection limit of 3.1ng/mL and 1.8ng/mL for protamine and trypsin, respectively. Meanwhile, the nanosensor shows good selectivity, sensitivity and can be successfully applied to detection of protamine and trypsin in serum samples.

A label-free electrochemical aptasensor based on graphene oxide/double-stranded DNA nanocomposite

A novel label-free electrochemical impedance aptasensor based on a gold nanoparticles/double-stranded DNA-graphene (AuNPs/dsDNA-GO) nanocomposite modified glassy carbon electrode was presented for quantitative determination of thrombin. GO was covalently functionalized with dsDNA via a facile amidation process, and then AuNPs were electrodeposited onto the surface of dsDNA-GO. The morphology, conductivity and interaction of the as-prepared nanocomposites were characterized by scanning electron microscopy, cyclic voltammetry, electrochemical impedance spectroscopy (EIS), Raman and Fourier transform infrared spectroscopy. The thrombin-binding aptamer (TBA) was conjugated to AuNPs via gold-thiol chemistry to construct electrochemical aptasensing platform, and the specific recognition between TBA and thrombin was monitored by EIS. Under optimum conditions, thrombin could be quantified in a wide range of 0.1-100nM (R(2)=0.9960) with low detection limit of 0.06nM (S/N=3).

Biomedical Perspective of Electrochemical Nanobiosensor

Electrochemical biosensor holds great promise in the biomedical area due to its enhanced specificity, sensitivity, label-free nature and cost effectiveness for rapid point-of-care detection of diseases at bedside. In this review, we are focusing on the working principle of electrochemical biosensor and how it can be employed in detecting biomarkers of fatal diseases like cancer, AIDS, hepatitis and cardiovascular diseases. Recent advances in the development of implantable biosensors and exploration of nanomaterials in fabrication of electrodes with increasing the sensitivity of biosensor for quick and easy detection of biomolecules have been elucidated in detail. Electrochemical-based detection of heavy metal ions which cause harmful effect on human health has been discussed. Key challenges associated with the electrochemical sensor and its future perspectives are also addressed.

Voltammetric determination of 4-chlorophenol using multiwall carbon nanotube/gold nanoparticle nanocomposite modified glassy carbon electrodes

We synthesized gold nanoparticles/carboxyl functionalized multi-walled carbon nanotubes nanocomposites via an in situ reduction method and further explored their potentials in 4-chlorophenol detection.

Group 6 metal pentacarbonyl complexes of air-stable primary, secondary, and tertiary ferrocenylethylphosphines

The synthesis and characterization of a series of Group 6 metal pentacarbonyl complexes of air stable primary, secondary, and tertiary phosphines containing ferrocenylethyl substituents are reported [M(CO)5L: M = Cr, Mo, W; L = PH2(CH2CH2Fc), PH(CH2CH2Fc)2, P(CH2CH2Fc)3]. The structure and composition of the complexes were confirmed by multinuclear NMR spectroscopy, IR and UV-Vis absorption spectroscopy, mass spectrometry, X-ray crystallography, and elemental analysis. The solid-state structural data reported revealed trends in M-C and M-P bond lengths that mirrored those of the atomic radii of the Group 6 metals involved. UV-Vis absorption spectroscopy and cyclic voltammetry highlighted characteristics consistent with electronically isolated ferrocene units including wavelengths of maximum absorption between 435 and 441 nm and reversible one-electron (per ferrocene unit) oxidation waves between 10 and -5 mV relative to the ferrocene/ferrocenium redox couple. IR spectroscopy confirmed that the σ donating ability of the phosphines increased as ferrocenylethyl substituents were introduced and that the tertiary phosphine ligand described is a stronger σ donor than PPh3 and a weaker σ donor than PEt3, respectively.

Designing Fluorescent Peptide Sensors with Dual Specificity for the Detection of HIV-1 Protease

HIV-1 protease is a key enzyme in the life cycle of HIV/AIDS, as it is responsible for the formation of the mature virus particle. We demonstrate here that phage-display peptides raised against this enzyme can be used as peptide sensors for the detection of HIV-1 protease in a simple, one-pot assay. The presence of the enzyme is detected through an energy transfer between two peptide sensors when simultaneously complexed with the target protein. The multivalent nature of this assay increases the specificity of the detection by requiring all molecules to be interacting in order for there to be a FRET signal. We also perform molecular dynamics simulations to explore the interaction between the protease and the peptides in order to guide the design of these peptide sensors and to understand the mechanisms which cause these simultaneous binding events. This approach aims to facilitate the development of new assays for enzymes that are not dependent on the cleavage of a substrate and do not require multiple washing steps.

Gold nanoclusters-based chemiluminescence resonance energy transfer method for sensitive and label-free detection of trypsin

A chemiluminescence resonance energy transfer (CRET) platform was developed for sensitive and label-free detection of protease by using trypsin as a model analyte. In this CRET platform, bis(2,4,6-trichlorophenyl)oxalate-hydrogen peroxide chemiluminescence (CL) reaction was utilized as an energy donor and bovine serum albumin (BSA)-stabilized gold nanoclusters (Au NCs) as an energy acceptor. The BSA-stabilized Au NCs triggered the CRET phenomenon by accepting the energy from TCPO-H2O2 CL reaction, thus producing intense CL. In the presence of trypsin, the protein template of BSA-stabilized Au NCs was digested, which frustrated the energy transfer efficiency between the CL donor and the BSA-stabilized Au NCs, leading to a significant decrease in the CL signal. The decreased CL signal was proportional to the logarithm of trypsin concentration in the range of 0.01-50.0µg mL(-1). The detection limit for trypsin was 9ng mL(-)(1) and the relative standard deviations were lesser than 3% (n=11). This Au NCs-based CRET platform was successfully applied to the determination of trypsin in human urine samples, demonstrating its potential application in clinical diagnosis.

Carbon nanomaterial-based electrochemical biosensors: an overview

Carbon materials on the nanoscale exhibit diverse outstanding properties, rendering them extremely suitable for the fabrication of electrochemical biosensors. Over the past two decades, advances in this area have continuously emerged. In this review, we attempt to survey the recent developments of electrochemical biosensors based on six types of carbon nanomaterials (CNs), i.e., graphene, carbon nanotubes, carbon dots, carbon nanofibers, nanodiamonds and buckminsterfullerene. For each material, representative samples are introduced to expound the different roles of the CNs in electrochemical bioanalytical strategies. In addition, remaining challenges and perspectives for future developments are also briefly discussed.

A carbon ion beam irradiated MWCNT/AuNPs composite sensor for a sensitive assay of purine-nucleosides of DNA

Sensor for purine nucleosides has been developed using irradiation with high energy carbon ion beam.

Recent progress in prostate-specific antigen and HIV proteases detection

Proteases mediate a wide variety of biological events and have a critical role in the development of many diseases. Protease detection methods can be hindered by the limitation of assay safety, sensitivity, specificity, time constraints and ease of on-site analysis. Notably, the implementation of various detection methods on biosensing platforms translates them into practical biosensing applications. Currently, the detection of prostate cancer and AIDS at the earliest occasion is one of the major research obstacles. Therefore, recent advances focus on the development of portable detection systems toward point-of-care testing. These detection systems should be highly sensitive and specific for the detection of their prognostic biomarkers, such as the prostate-specific antigen and HIV load assay for prostate cancer and AIDS, respectively. These methods will also facilitate decision-making on a treatment regimen.

Post-genomics nanotechnology is gaining momentum: nanoproteomics and applications in life sciences

The post-genomics era has brought about new Omics biotechnologies, such as proteomics and metabolomics, as well as their novel applications to personal genomics and the quantified self. These advances are now also catalyzing other and newer post-genomics innovations, leading to convergences between Omics and nanotechnology. In this work, we systematically contextualize and exemplify an emerging strand of post-genomics life sciences, namely, nanoproteomics and its applications in health and integrative biological systems. Nanotechnology has been utilized as a complementary component to revolutionize proteomics through different kinds of nanotechnology applications, including nanoporous structures, functionalized nanoparticles, quantum dots, and polymeric nanostructures. Those applications, though still in their infancy, have led to several highly sensitive diagnostics and new methods of drug delivery and targeted therapy for clinical use. The present article differs from previous analyses of nanoproteomics in that it offers an in-depth and comparative evaluation of the attendant biotechnology portfolio and their applications as seen through the lens of post-genomics life sciences and biomedicine. These include: (1) immunosensors for inflammatory, pathogenic, and autoimmune markers for infectious and autoimmune diseases, (2) amplified immunoassays for detection of cancer biomarkers, and (3) methods for targeted therapy and automatically adjusted drug delivery such as in experimental stroke and brain injury studies. As nanoproteomics becomes available both to the clinician at the bedside and the citizens who are increasingly interested in access to novel post-genomics diagnostics through initiatives such as the quantified self, we anticipate further breakthroughs in personalized and targeted medicine.

A molecularly imprinted electrochemical enzymeless sensor based on functionalized gold nanoparticle decorated carbon nanotubes for methyl-parathion detection

Schematic of MP MIP sensor and the possible mechanism.

Adsorption and self-assembly of a ferrocene d- and l-nonapeptide disulfide onto gold and mica substrates

Linear nanostructures resulting form self-association of a nonapeptide (left) yield progressively to ring-shaped nanostructures (right).

Recent Progress in Ferrocene-Modified Thin Films and Nanoparticles for Biosensors

This article reviews recent progress in the development of ferrocene (Fc)-modified thin films and nanoparticles in relation to their biosensor applications. Redox-active materials in enzyme biosensors commonly use Fc derivatives, which mediate electron transfer between the electrode and enzyme active site. Either voltammetric or amperometric signals originating from redox reactions of Fc are detected or modulated by the binding of analytes on the electrode. Fc-modified thin films have been prepared by a variety of protocols, including insitu polymerization, layer-by-layer (LbL) deposition, host-guest complexation and molecular recognitions. Insitu polymerization provides a facile way to form Fc thin films, because the Fc polymers are directly deposited onto the electrode surface. LbL deposition, which can modulate the film thickness and Fc content, is suitable for preparing well-organized thin films. Other techniques, such as host-guest complexation and protein-based molecular recognition, are useful for preparing Fc thin films. Fc-modified Au nanoparticles have been widely used as redox-active materials to fabricate electrochemical biosensors. Fc derivatives are often attached to Au nanoparticles through a thiol-Au linkage. Nanoparticles consisting of inorganic porous materials, such as zeolites and iron oxide, and nanoparticle-based composite materials have also been used to prepare Fc-modified nanoparticles. To construct biosensors, Fc-modified nanoparticles are immobilized on the electrode surface together with enzymes.

Biomimetic synthesis of fluorogenic quantum dots for ultrasensitive label-free detection of protease activities

A biomimetic quantum dot synthesis-based strategy for ultrasensitive label-free detection of protease activities is reported. A dithiol peptide substrate can be activated by the protease through cleavage to form monothiol peptides, which then triggers QD growth and generates a photoluminescence signal readout. As low as 0.8 nM trypsin can be detected directly in buffer and serum and 4 pM trypsin can be detected via trypsinogen amplification with high signal to background ratios.

Selective detection of endotoxin using an impedance aptasensor with electrochemically deposited gold nanoparticles

Using a single-stranded DNA (ssDNA) aptamer exhibiting high binding affinity (Kd = 12 nM) to endotoxin as a probe, an impedance sensor where aptamer-conjugated gold nanoparticles (AuNPs) were electrochemically deposited on a gold electrode was fabricated and its performance in regard to endotoxin detection assessed. AuNPs have been employed widely as biosensors because of their unique physical and chemical properties. In order to maximize the performance of the impedance aptasensor on endotoxin detection, some critical factors affecting aptamer conjugation to AuNPs and target recognition ability (i.e. concentrations of aptamer coupled with AuNPs, pH, ion strength and cation effect at the time of aptamer-endotoxin interaction) were optimized. Electrochemical impendence spectroscopy, cyclic voltametry, atomic force microscope, scanning electron microscope and quartz crystal microbalance were employed to characterize all the modification/detection procedures during the sensor fabrication. The developed aptasensor showed a broad linear dynamic detection range (0.01-10.24 ng/ml) with a very low detection limit for endotoxin (0.005 ng/ml), despite the presence of several biomolecules (e.g. plasmid DNA, RNA, serum albumin, Glc and sucrose) known to interfere with other endotoxin assays. The demonstrated aptasensor required a detection time of only 10 min, providing a simple and fast analytical method to specifically detect endotoxin from complex biological liqors.

An enzyme-responsive nanocontainer as an intelligent signal-amplification platform for a multiple proteases assay

Based on selective pore-opening in the presence of protease, we have developed a novel signal amplification assay for multiple proteases detection and their inhibition using protein-capped mesoporous scaffolding as the substrate.

Critical issues in sensor science to aid food and water safety

The stability of food and water supplies is widely recognized as a global issue of fundamental importance. Sensor development for food and water safety by nonconventional assays continues to overcome technological challenges. The delicate balance between attaining adequate limits of detection, chemical fingerprinting of the target species, dealing with the complex food matrix, and operating in difficult environments are still the focus of current efforts. While the traditional pursuit of robust recognition methods remains important, emerging engineered nanomaterials and nanotechnology promise better sensor performance but also bring about new challenges. Both advanced receptor-based sensors and emerging non-receptor-based physical sensors are evaluated for their critical challenges toward out-of-laboratory applications.