First fluorescent photoinduced electron transfer (PET) reagent for hydroperoxides

A Luminescence Assay in the Red for the Detection of Hydrogen Peroxide and Glucose Based on Metal Coordination Polyelectrolyte-Induced Supramolecular Self-Assembly of Alkynylplatinum(II) Complexes

A new sensing strategy towards hydrogen peroxide based on metal coordination polyelectrolyte-driven self-assembly of alkynylplatinum(II) 2,6-bis(benzimidazol-2'-yl)pyridine (bzimpy) complex was demonstrated. The cationic in situ-generated Ag(I)-thiocholine coordination polyelectrolytes were shown to induce the supramolecular self-assembly of anionic low-energy red-emissive alkynylplatinum(II) bzimpy complexes via non-covalent Pt(II)⋅⋅⋅Pt(II), electrostatic and π-π stacking interactions. The presence of hydrogen peroxide was shown to inhibit the formation of coordination polyelectrolytes and the coordination polyelectrolyte-induced self-assembly of platinum(II) complexes. The weakening of Pt(II)⋅⋅⋅Pt(II), electrostatic and π-π stacking interactions was supported by UV-vis absorption, emission, and resonance light scattering (RLS) studies. The present assay was also applied to probe glucose indirectly based on the enzymatic reaction of glucose oxidase on the substrate. Operating in a label-free manner, together with the low-energy red emission and large Stokes shift of alkynylplatinum(II) complexes, these features render the proposed design attractive for biological applications.

Evaluate the bisphenol A-induced redox state in cells, zebrafish and in vivo with a hydrogen peroxide turn-on fluorescent probe

Hydrogen peroxide (H₂O₂) is an important active oxygen species that plays a major role in redox balance and in physiological and pathological processes of various diseases of biological systems. As H₂O₂ is an endogenous active molecule, fluctuations in H₂O₂ content are not only affected by the state of biological system itself but also easily affected by Bisphenol A (BPA, a typical estrogenic environmental pollutant) in the external environment. Here, the near-infrared fluorescent probe Cy-NOH2 (λ_em = 750 nm) as a tool was synthesized to detect fluctuations in H₂O₂ content in cells and organisms induced by BPA. High sensitivity and excellent selectivity were found when the probe Cy-NOH2 was used to monitor endogenous H₂O₂ in vitro. In addition, the expression of H₂O₂ induced by different concentrations of BPA was able to be detected by the probe. Zebrafish and mice models were induced with different concentrations of BPA, and the H₂O₂ content showed significant increasing trends in zebrafish and livers of mice with increasing BPA concentrations. This study reveals that the probe Cy-NOH2 can be used as an effective tool to monitor the redox state in vivo under the influence of BPA, which provides a basis for clarifying the mechanisms of BPA in a variety of physiological and pathological processes.

Controlling the triplet states and their application in external stimuli-responsive triplet-triplet-annihilation photon upconversion: from the perspective of excited state photochemistry

The property of organic light-responsive materials is determined by their electronic excited states to a large extent, for instance, the radiative decay rate constants, redox potentials, and lifetimes. Tuning the excited state properties with external stimuli will lead to versatile functional materials; a representative example is the fluorescence molecular probes, in which the singlet excited states are controlled by the external stimuli, i.e., by interaction with the analytes. In comparison, controlling the triplet excited state with external stimuli has been rarely reported, although it is also crucial for the development of novel materials for targeted photodynamic therapy (PDT) reagents and phosphorescent molecular probes. The reported results show that the principles used in singlet excited state tuning are unable to be simply applied to the triplet excited state. In this review article, we summarized the recent results on controlling the triplet excited states by the external stimuli (chemical or light), and the application of the triplet state tuning in the chemical/light controllable triplet-triplet-annihilation upconversion (TTA UC). We discussed the methods for the control of the triplet states, as well as singlet excited state, for the purpose of controlling the TTA UC. Both successful and unsuccessful methods are discussed. This information is helpful for understanding the photophysical processes in which the triplet excited state is involved, and the development of novel external stimuli-responsive triplet photosensitizers.

Deciphering the unusual fluorescence in weakly coupled bis-nitro-pyrrolo[3,2-b]pyrroles

Electron-deficient π-conjugated functional dyes lie at the heart of organic optoelectronics. Adding nitro groups to aromatic compounds usually quenches their fluorescence via inter-system crossing (ISC) or internal conversion (IC). While strong electronic coupling of the nitro groups with the dyes ensures the benefits from these electron-withdrawing substituents, it also leads to fluorescence quenching. Here, we demonstrate how such electronic coupling affects the photophysics of acceptor-donor-acceptor fluorescent dyes, with nitrophenyl acceptors and a pyrrolo[3,2-b]pyrrole donor. The position of the nitro groups and the donor-acceptor distance strongly affect the fluorescence properties of the bis-nitrotetraphenylpyrrolopyrroles. Concurrently, increasing solvent polarity quenches the emission that recovers upon solidifying the media. Intramolecular charge transfer (CT) and molecular dynamics, therefore, govern the fluorescence of these nitro-aromatics. While balanced donor-acceptor coupling ensures fast radiative deactivation and slow ISC essential for large fluorescence quantum yields, vibronic borrowing accounts for medium dependent IC via back CT. These mechanistic paradigms set important design principles for molecular photonics and electronics.

Theoretical study of lanthanide-based in vivo luminescent probes for detecting hydrogen peroxide

The 4f-4f emissions from lanthanide trication (Ln³⁺ ) complexes are widely used in bioimaging probes. The emission intensity from Ln³⁺ depends on the surroundings, and thus, the design of appropriate photo-antenna ligands is indispensable. In this study, we focus on two probes for detecting hydrogen peroxide, for which emission intensities from Tb³⁺ are enhanced chemo-selectively by the H₂ O₂ -mediated oxidation of ligands. To understand the mechanism, the Gibbs free energy profiles of the ground and excited states related to emission and quenching are computed by combining our approximation-called the energy shift method-and density functional theory. The different emission intensities are mainly attributed to different activation barriers for excitation energy transfer from the ligand-centered triplet (T1) to the Tb³⁺ -centered excited state. Additionally, quenching from T1 to the ground state via intersystem crossing was inhibited by intramolecular hydrogen bonds only in the highly emissive Tb³⁺ complexes. © 2018 Wiley Periodicals, Inc.

Phosgene invites selective switch-on fluorescence at ppm concentrations in a Betti base by hindering 2-way PET

Phosgene ignites a decisive and immediate fluorescence response in a simple Betti base.

Rational design of time-resolved turn-on fluorescence sensors: exploiting delayed fluorescence for hydrogen peroxide sensing

Weakly emissive phosphine compounds, which contain a carbazolyl donor-triarylboryl acceptor luminophore, become strongly delayed fluorescent upon changes to their oxide forms. Time-gated acquisition of the fluorescence signals of phosphine in the presence of H2O2 and a competitive fluorescence dye allow for detection of H2O2 with elimination of short-lived fluorescence noise.

Chromogenic, Fluorescent, and Redox Sensors for Multichannel Imaging and Detection of Hydrogen Peroxide in Living Cell Systems

Hydrogen peroxide (H₂O₂) is an important reactive oxygen species (ROS). Maintaining the H₂O₂ concentration at a normal level is critical to achieve the normal physiological activities of cells, which otherwise might trigger various diseases. Therefore, it is necessary to develop new and practical multisignaling sensors for both visualization of intracellular H₂O₂ and accurate detection of extracellular H₂O₂. In this paper, a novel multichannel signaling fluorescence-electrochemistry combined probe 1 (FE-H₂O₂) is presented for imaging and detection of H₂O₂ in living cell systems. In our design, the probe FE-H₂O₂ consists of a H₂O₂ reaction site and 4-ferrocenyl(vinyl)pyridine unit which affords chromogenic, fluorescent, and electrochemical signals. These structural motifs yield a combined chromogenic, fluorescent, and redox sensor in a single molecule. Probe FE-H₂O₂ showed a "Turn-On" fluorescence response to H₂O₂, which can be used for monitoring intracellular H₂O₂ in vivo. Furthermore, the electrochemical response of probe FE-H₂O₂ was decreased after the addition of H₂O₂, which can be applied for accurate detection of H₂O₂ released from living cells. When the fluorescence imaging method is combined with electrochemical analysis technology, it is hopeful that the well-designed multimodule probe can serve as a practical tool for understanding the metabolism and homeostasis of H₂O₂ in a complex biological system.

Synthesis and characterisation of fluorescent aminophosphines and their coordination to gold(i)

Three novel fluorescent aminophosphine ligands have been synthesised that incorporate napthyl (L1), pyrenyl (L2) and anthraquinone (L3) chromophores into their structures. The ligands react with [AuCl(tht)] (tht = tetrahydrothiophene) to give neutral complexes of the form [AuCl(L1-3)]. Solid state, X-ray crystallographic data was obtained for the anthraquinone derivative, [AuCl(L3)], and showed a distorted linear coordination geometry at Au(i). The packing structure also revealed a number of intermolecular π-π interactions that involve the anthraquinone and phenyl units of the aminophosphine ligand. 31P NMR spectroscopic data revealed δP values of +42.2 (L1), +42.1 (L2) and +26.1 (L3) ppm, which shifted downfield upon coordination to Au(i) to +64.6, +64.7, and +55.8 ppm, respectively. Supporting TD-DFT studies were able to reproduce the structure and 31P NMR chemical shifts of [AuCl(L3)] as well as rationalise the HOMO-LUMO compositions. Photophysical studies showed that the appended fluorophore dominates the absorption and emission properties for the ligands and complexes, with the anthraquinone derivatives showing visible emission at ca. 570 nm which was attributed to the intramolecular charge transfer character of the phosphinoaminoanthraquinone fragment.

Versatile Histochemical Approach to Detection of Hydrogen Peroxide in Cells and Tissues Based on Puromycin Staining

Hydrogen peroxide (H2O2) is a central reactive oxygen species (ROS) that contributes to diseases from obesity to cancer to neurodegeneration but is also emerging as an important signaling molecule. We now report a versatile histochemical approach for detection of H2O2 that can be employed across a broad range of cell and tissue specimens in both healthy and disease states. We have developed a first-generation H2O2-responsive analogue named Peroxymycin-1, which is based on the classic cell-staining molecule puromycin and enables covalent staining of biological samples and retains its signal after fixation. H2O2-mediated boronate cleavage uncages the puromycin aminonucleoside, which leaves a permanent and dose-dependent mark on treated biological specimens that can be detected with high sensitivity and precision through a standard immunofluorescence assay. Peroxymycin-1 is selective and sensitive enough to image both exogenous and endogenous changes in cellular H2O2 levels and can be exploited to profile resting H2O2 levels across a panel of cell lines to distinguish metastatic, invasive cancer cells from less invasive cancer and nontumorigenic counterparts, based on correlations with ROS status. Moreover, we establish that Peroxymycin-1 is an effective histochemical probe for in vivo H2O2 analysis, as shown through identification of aberrant elevations in H2O2 levels in liver tissues in a murine model of nonalcoholic fatty liver disease, thus demonstrating the potential of this approach for studying disease states and progression associated with H2O2. This work provides design principles that should enable development of a broader range of histochemical probes for biological use that operate via activity-based sensing.

Lighting-up protein–ligand interactions with fluorescent PET (photoinduced electron transfer) sensor designs

Extending the versatile fluorescent PET sensing/switching system causes ‘off–on’ signalling when a ligand binds to its appropriate protein.

Mechanism of nucleophilic substitution reactions of 4-(4ˊ-nitro)phenylnitrobenzofurazan ether with aniline in acetonitrile

Rate constants and activation parameters obtained for the nucleophilic aromatic substitution reactions (SNAr) of 4-substitutedphenoxy-7-nitrobenzoxadiazole (1) with aniline in acetonitrile at varying temperature using Nuclear Magnetic Resonance (NMR) techniques were reported. These results were compared with the theoretical study which identifies transformations and intermediates using Density Functional Theory (DFT).

On the Origins of Nonradiative Excited State Relaxation in Aryl Sulfoxides Relevant to Fluorescent Chemosensing

We provide herein a mechanistic analysis of aryl sulfoxide excited state processes, inspired by our recent report of aryl sulfoxide based fluorescent chemosensors. The use of aryl sulfoxides as reporting elements in chemosensor development is a significant deviation from previous approaches, and thus warrants closer examination. We demonstrate that metal ion binding suppresses nonradiative excited state decay by blocking formation of a previously unrecognized charge transfer excited state, leading to fluorescence enhancement. This charge transfer state derives from the initially formed locally excited state followed by intramolecular charge transfer to form a sulfoxide radical cation/aryl radical anion pair. With the aid of computational studies, we map out ground and excited state potential energy surface details for aryl sulfoxides, and conclude that fluorescence enhancement is almost entirely the result of excited state effects. This work expands previous proposals that excited state pyramidal inversion is the major nonradiative decay pathway for aryl sulfoxides. We show that pyramidal inversion is indeed relevant, but that an additional and dominant nonradiative pathway must also exist. These conclusions have implications for the design of next generation sulfoxide based fluorescent chemosensors.

A near-infrared fluorescent aza-bodipy probe for dual-wavelength detection of hydrogen peroxide in living cells

A boronic acid functionalized aza-borondipyrromethene dye (azaBDPBA) was applied to the dual-wavelength detection of hydrogen peroxide with high selectivity, which was loaded into cells to indicate the alteration of intracellular hydrogen peroxide during biological processes.

Photo-induced electron transfer in a diamino-substituted Ru(bpy)3[PF6]2 complex and its application as a triplet photosensitizer for nitric oxide (NO)-activated triplet–triplet annihilation upconversion

The photo-induced electron transfer in the diamino-Ru(bpy)₃ complex was studied with ultrafast absorption spectroscopy and was used for nitric oxide (NO)-activated triplet–triplet annihilation upconversion.

A dialdehyde–diboronate-functionalized AIE luminogen: design, synthesis and application in the detection of hydrogen peroxide

A dialdehyde–diboronate-functionalized tetraphenylethene (TPE-DABF) was reported as a H₂O₂-specific AIE luminogen.

A carbon dot-based fluorescence turn-on sensor for hydrogen peroxide with a photo-induced electron transfer mechanism

A carbon dot-based fluorescence turn-on sensor for hydrogen peroxide with a photo-induced electron transfer mechanism was developed.

H2O2-activated triplet–triplet annihilation upconversion via modulation of the fluorescence quantum yields of the triplet acceptor and the triplet–triplet-energy-transfer efficiency

H₂O₂-activatable TTA upconversion was achieved with non-fluorescent 9,10-bis(diphenylphosphino)anthracene as a triplet acceptor/emitter, which can be oxidized to a fluorescent product by H₂O₂.

A luminescence-based probe for sensitive detection of hydrogen peroxide in seconds

Here, we present a fast and simple hydrogen peroxide assay that is based on time-resolved fluorescence. The emission intensity of a complex consisting of terbium ions (Tb(3+)) and phthalic acid (PA) in HEPES buffer is quenched in the presence of H2O2 and this quenching is concentration-dependent. The novel PATb assay detects hydrogen peroxide at a pH range from 7.5 to 8.5 and with a detection limit of 150 nmol L(-1) at pH 8.5. The total assay time is less than 1 min. The linear range of the assay can be adapted by a pH adjustment of the aqueous buffer and covers a concentration range from 310 nmol L(-1) to 2.56 mmol L(-1) in total which encompasses four orders of magnitude. The assay is compatible with high concentrations of all 47 tested inorganic and organic compounds. The PATb assay was applied to quantify H2O2 in polluted river water samples. In conclusion, this fast and easy-to-use assay detects H2O2 with high sensitivity and precision.

BR2BodPR2: highly fluorescent alternatives to PPh3and PhPCy2

The syntheses of highly fluorescent analogues of PPh₃and PhPCy₂based on the Bodipy chromophore are described.

Reaction-based and single fluorescent emitter decorated ratiometric nanoprobe to detect hydrogen peroxide

A novel reaction-based cross-linked polymeric nanoprobe with a self-calibrating ratiometric fluorescence readout to selectively detect H2O2 is reported. The polymeric nanoprobe is fabricated by using hydrophobic H2O2-reactive boronic ester groups, crosslinker units, and environmentally sensitive 3-hydroxyflavone fluorophores through a miniemulsion polymerization. On treatment with H2O2, the boronic esters in the polymer are cleaved to form hydrophilic alcohols and subsequently lead to a hydrophobic-hydrophilic transition. Covalently linked 3-hydroxyflavones manifest the change in polarity as a ratiometric transition from green to blue, accompanied by a 500-fold increase in volume. Furthermore, this nanoprobe has been used for ratiometric sensing of glucose by monitoring the H2O2 generated during the oxidation of glucose by glucose oxidase, and thus successfully distinguished between normal and pathological levels of glucose.

7-Nitro-4-(phenylthio)benzofurazan is a potent generator of superoxide and hydrogen peroxide

Here, we report on 7-nitro-4-(phenylthio)benzofurazan (NBF-SPh), the most potent derivative among a set of patented anticancer 7-nitrobenzofurazans (NBFs), which have been suggested to function by perturbing protein-protein interactions. We demonstrate that NBF-SPh participates in toxic redox-cycling, rapidly generating reactive oxygen species (ROS) in the presence of molecular oxygen, and this is the first report to detail ROS production for any of the anticancer NBFs. Oxygraph studies showed that NBF-SPh consumes molecular oxygen at a substantial rate, rivaling even plumbagin, menadione, and juglone. Biochemical and enzymatic assays identified superoxide and hydrogen peroxide as products of its redox-cycling activity, and the rapid rate of ROS production appears to be sufficient to account for some of the toxicity of NBF-SPh (LC(50) = 12.1 μM), possibly explaining why tumor cells exhibit a sharp threshold for tolerating the compound. In cell cultures, lipid peroxidation was enhanced after treatment with NBF-SPh, as measured by 2-thiobarbituric acid-reactive substances, indicating a significant accumulation of ROS. Thioglycerol rescued cell death and increased survival by 15-fold to 20-fold, but pyruvate and uric acid were ineffective protectants. We also observed that the redox-cycling activity of NBF-SPh became exhausted after an average of approximately 19 cycles per NBF-SPh molecule. Electrochemical and computational analyses suggest that partial reduction of NBF-SPh enhances electrophilicity, which appears to encourage scavenging activity and contribute to electrophilic toxicity.

A palette of fluorescent probes with varying emission colors for imaging hydrogen peroxide signaling in living cells

We present a new family of fluorescent probes with varying emission colors for selectively imaging hydrogen peroxide (H(2)O(2)) generated at physiological cell signaling levels. This structurally homologous series of fluorescein- and rhodol-based reporters relies on a chemospecific boronate-to-phenol switch to respond to H(2)O(2) over a panel of biologically relevant reactive oxygen species (ROS) with tunable excitation and emission maxima and sensitivity to endogenously produced H(2)O(2) signals, as shown by studies in RAW264.7 macrophages during the phagocytic respiratory burst and A431 cells in response to EGF stimulation. We further demonstrate the utility of these reagents in multicolor imaging experiments by using one of the new H(2)O(2)-specific probes, Peroxy Orange 1 (PO1), in conjunction with the green-fluorescent highly reactive oxygen species (hROS) probe, APF. This dual-probe approach allows for selective discrimination between changes in H(2)O(2) and hypochlorous acid (HOCl) levels in live RAW264.7 macrophages. Moreover, when macrophages labeled with both PO1 and APF were stimulated to induce an immune response, we discovered three distinct types of phagosomes: those that generated mainly hROS, those that produced mainly H(2)O(2), and those that possessed both types of ROS. The ability to monitor multiple ROS fluxes simultaneously using a palette of different colored fluorescent probes opens new opportunities to disentangle the complex contributions of oxidation biology to living systems by molecular imaging.

An ICT-based approach to ratiometric fluorescence imaging of hydrogen peroxide produced in living cells

We present the synthesis, properties, and biological applications of Peroxy Lucifer 1 (PL1), a new fluorescent probe for imaging hydrogen peroxide produced in living cells by a ratiometric response. PL1 utilizes a chemoselective boronate-based switch to detect hydrogen peroxide by modulation of internal charge transfer (ICT) within a 1,8-naphthalimide dye. PL1 features high selectivity for hydrogen peroxide over similar reactive oxygen species, including superoxide, and nitric oxide, and a 65 nm shift in emission from blue-colored fluorescence to green-colored fluorescence upon reaction with peroxide. Two-photon confocal microscopy experiments in live macrophages show that PL1 can ratiometrically visualize localized hydrogen peroxide bursts generated in living cells at immune response levels.

Fluorescent probes for nitric oxide and hydrogen peroxide in cell signaling

Nitric oxide (NO) and hydrogen peroxide (H(2)O(2)) have emerged as essential small molecules for cellular signal transduction owing largely to their ability to mediate oxidative posttranslational modifications (PTMs). Inventing new ways to track these small, diffusible, and reactive species with spatial and temporal resolution is a key challenge in elucidating their chemistry in living systems. Recent progress in the development of fluorescent probes that respond selectively to NO and H(2)O(2) produced at cell signaling levels offers a promising approach to interrogating their physiological production, accumulation, trafficking, and function.