Au(I)-catalyzed ring expanding cycloisomerizations: total synthesis of ventricosene

Chiral Auxiliary Approach for Gold(I)-Catalyzed Cyclizations

Two different classes of stereoselective cyclizations have been developed using a chiral auxiliary approach with commercially available [JohnPhosAu(MeCN)SbF6 ] as catalyst. First, a stereoselective cascade cyclization of 1,5-enynes was achieved using the Oppolzer camphorsultam as chiral auxiliary. In this case, a one-pot cyclization-hydrolysis sequence was developed to directly afford enantioenriched spirocyclic ketones. Then, the stereoselective alkoxycyclization of 1,6-enynes was mediated by an Evans-type oxazolidinone. A reduction-hydrolysis sequence was selected to remove the auxiliary to give enantioenriched β-tetralones. DFT studies confirmed that the steric clash between the chiral auxiliary and alkene accounts for the experimentally observed diastereoselective cyclization through the Si face.

Recent progress in the homogeneous gold-catalysed cycloisomerisation reactions

This review focuses on recent advancements in the efficacy of gold catalysts for the cycloisomerisation of ynamides, diynes, and 1,n-enynes to build complex molecules, with critical insight into their mechanism and reaction scope.

Gold-Catalysed Rearrangement of Unconventional Cyclopropane-Tethered 1,5-Enynes

The synthesis of particular cyclopropane-tethered 1,5-enynes, namely 6-alkynyl-4-alkylidenebicyclo[3.1.0]hex-2-enes, enabled the discovery of an unprecedented gold-catalyzed rearrangment to indenes. A computational study of the mechanism of this profund skeleton rearrangement is...

Thermally-Induced Intramolecular [4+2] Cycloaddition of Allylamino- or Allyloxy-Tethered Alkylidenecyclopropanes

A thermally-induced intramolecular [4+2] cycloaddition reaction of allylamino- or allyloxy-tethered alkylidenecyclopropanes has been reported in this paper, giving a new protocol for the rapid construction of polycyclic skeleton molecules in moderate to excellent yields with a broad substrate scope. On the basis of control experiments and DFT calculations, we disclosed that the reaction proceeded through a [4+2] cycloaddition and trace of water assisted 1,3-H shift process to give the target product.

Small rings in the bigger picture: ring expansion of three- and four-membered rings to access larger all-carbon cyclic systems

The release of the inherent ring strain of cyclobutane and cyclopropane derivatives allows a rapid build-up of molecular complexity. This review highlights the state-of-the-art of the ring expansions of three- and four-membered cycles and is organised by types of reactions with emphasis on the reaction mechanisms. Selected examples are discussed to illustrate the synthetic potential of this elegant synthetic tool.

Recent Advances in the Development of Chiral Gold Complexes for Catalytic Asymmetric Catalysis

Asymmetric gold catalysis has been rapidly developed in the past ten years. Breakthroughs have been made by rational design and meticulous selection of chiral ligands. This review summarizes newly developed gold-catalyzed enantioselective organic transformations and recent progress in ligand design (since 2016), organized according to different types of chiral ligands, including bisphosphine ligands, monophosphine ligands, phosphite-derived ligands, and N-heterocyclic carbene ligands for asymmetric gold(I) catalysis as well as heterocyclic carbene ligands and oxazoline ligands for asymmetric gold(III) catalysis.

Adventures and Detours in the Synthesis of Hydropentalenes

Functionalized hydropentalenes (i.e., bicyclo[3.3.0]octanones) constitute important building blocks for natural products and for ligands for asymmetric catalysis. The assembly and tailored functionalization of this convex roof-shaped scaffold is challenging and has motivated a variety of synthetic approaches including our own contributions, which will be presented in this account.

1 Introduction

2 Biosynthesis of Hydropentalenes

3 Hydropentalenes through the Pauson–Khand Reaction

4 Hydropentalenes through Transannular Oxidative Cyclization of Cycloocta-1,4-diene

5 Functionalization of Bicyclo[3.3.0]octan-1,4-dione to Dodecahydrocyclopenta[a]indenes

6 Functionalization of Bicyclo[3.3.0]octan-1,4-diones to Crown Ether Hybrids

7 Functionalization of Bicyclo[3.3.0]octan-1,4-dione to Cylindramide

8 Tandem Ring-Opening Metathesis/Ring-Closing Metathesis/Cross-Metathesis of Bicyclo[2.2.1]heptanes

9 Functionalization of Bicyclo[3.3.0]octan-1,4-dione to Geodin A

10 Hydropentalenes through Enantioselective Desymmetrization of Weiss Diketones

11 Functionalization of Weiss Diketones by Carbonyl Ene Reactions

12 Functionalization of the Weiss Diketone to Cylindramide and Geodin A Core Units

13 Biological Properties of Bicyclo[3.3.0]octanes

14 Hydropentalenes through Vinylcyclopropane Cyclopentene Rearrangement

15 Functionalization of Bicyclo[3.3.0]octanes toward Chiral Dienes

16 Miscellaneous Syntheses of Hydropentalenes

17 Conclusion and Outlook

Gold-Catalyzed Synthesis of Small Rings

Three- and four-membered rings, widespread motifs in nature and medicinal chemistry, have fascinated chemists ever since their discovery. However, due to energetic considerations, small rings are often difficult to assemble. In this regard, homogeneous gold catalysis has emerged as a powerful tool to construct these highly strained carbocycles. This review aims to provide a comprehensive summary of all the major advances and discoveries made in the gold-catalyzed synthesis of cyclopropanes, cyclopropenes, cyclobutanes, cyclobutenes, and their corresponding heterocyclic or heterosubstituted analogs.

[C^N]-Alkenyl Gold(III) Complexes by Proximal Ring-Opening of (2-Pyridyl)alkylidenecyclopropanes: Mechanistic Insights

Pyridine-substituted alkylidenecyclopropanes (Py-ACPs) react with gold(III) salts under mild reaction conditions through an unprecedented, proximal ring-opening pathway, to generate highly appealing, catalytically active pyridine alkenyl [C^N]-gold(III) species. Mechanistic studies reveal that the activation of the C-C bond of the ACP takes place through an unusual concerted, σ-bond metathesis type-process.

Gold-Catalyzed Synthetic Strategies towards Four-Carbon Ring Systems

Four carbon ring systems are frequently present in natural products with remarkable biological activities such as terpenoids, alkaloids, and steroids. The development of new strategies for the assembly of these structures in a rapid and efficient manner has attracted the interest of synthetic chemists for a long time. The current research is focused mainly on the development of synthetic methods that can be performed under mild reaction conditions with a high tolerance to functional groups. In recent years, gold complexes have turned into excellent candidates for this aim, owing to their high reactivity, and are thus capable of promoting a wide range of transformations under mild conditions. Their remarkable efficiency has been thoroughly demonstrated in the synthesis of complex organic molecules from simple starting materials. This review summarizes the main synthetic strategies described for gold-catalyzed four-carbon ring formation, as well as their application in the synthesis of natural products.

Au(I)-Catalyzed Cyclization/Semipinacol Rearrangement Reaction of Allenes to Construct Quaternary Carbon-Containing Scaffolds

The development of methods toward the construction of quaternary carbon centers has been a hot topic in recent years. In this work, an Au(I)-catalyzed intramolecular cyclization/semipinacol rearrangement of allene-containing allylic silyl ether was developed to provide a direct strategy for the construction of multisubstituted cyclohexene-type compounds with a quaternary carbon center in moderate to good yields. In particular, this method provides an alternative synthetic strategy for the construction of a multisubstituted spirocyclo[4.5]decane skeleton and may be applied to the synthesis of related bioactive molecules and their derivatives, thus facilitating the corresponding functional studies.

General Synthesis of Cyclopropanols via Organometallic Addition to 1-Sulfonylcyclopropanols as Cyclopropanone Precursors

The addition of organometallic reagents to ketones constitutes one of the most straightforward synthetic approaches to tertiary alcohols. However, due to the absence of a well-behaved class of cyclopropanone surrogates accessible in enantioenriched form, such a trivial synthetic disconnection has received very little attention in the literature for the formation of tertiary cyclopropanols. In this work, we report a simple and high-yielding synthesis of 1-substituted cyclopropanols via the addition of diverse organometallic reagents to 1-phenylsulfonylcyclopropanols, acting here as in situ precursors of the corresponding cyclopropanones. The transformation is shown to be amenable to sp-, sp²-, or sp³-hybridized organometallic C-nucleophiles under mild conditions, and the use of enantioenriched substrates led to highly diastereoselective additions and the formation of optically active cyclopropanols.

Ring-fused cyclobutanes via cycloisomerization of alkylidenecyclopropane acylsilanes

A novel Lewis acid-catalyzed cycloisomerization of alkylidenecyclopropane acylsilanes is disclosed. The readily available starting materials participate in tandem Prins addition/ring expansion/1,2-silyl shift to grant access to bicyclo[4.2.0]octanes and bicyclo[3.2.0]heptanes, which are common motifs in terpenoid natural products. Notably, the transformation relies on the ability of acylsilanes to act sequentially as acceptors and donors on the same carbon atom.

Total Synthesis and Structural Revision of a Harziane Diterpenoid

The first total synthesis of nominal harziane diterpenoid 1 is disclosed, whose spectral characteristics did not match those of the reported natural product. Stereochemical analysis and subsequent synthesis of the epimeric tertiary alcohol led to reassignment of configuration of the natural product as shown for 2. At the heart of the synthesis is an enyne cycloisomerization that sets a key quaternary stereocenter within a cyclobutane with high diastereocontrol. The route features strategies for the synthesis of the highly congested 6-5-7-4 carbon skeleton characteristic of the caged harziane diterpenoids.

Controlling the Selectivity Patterns of Au-Catalyzed Cyclization-Migration Reactions

As little as 2 mol % of (XPhos)AuNTf₂ catalyzes the transformation of a broad range of o-acetylene-substituted styrenes into 1,2-dihydronaphthalenes. Our data suggests that this transformation occurs via a gold-stabilized cyclopropyl carbinyl cation, which triggers either a [1,2] carboxylate shift or a less favorable [1,2] aryl shift. The relative rates of these migrations can be controlled by the identity of the ligand or by stabilizing the mesomeric cation.

A Tandem Iridium-Catalyzed "Chain-Walking"/Cope Rearrangement Sequence

An iridium-catalyzed tandem olefin migration/Cope rearrangement of alkenyl ω-ene cyclopropanes is reported. By this means, a variety of complex annulenes are obtained as single diastereomers starting from cyclopropyl ester derived from simple 1,ω-dienes and alkenyldiazo compounds. Long-range olefin migration over up to 10 positions could be realized and coupled with an efficient Cope rearrangement to yield valuable scaffolds. Various functional groups are well-tolerated, giving rise to densely functionalized products. Furthermore, the present methodology could be successfully extended to yield bicyclic cycloheptenones starting from readily available alkenyl cyclopropanols via a Kulinkovich reaction.

Asymmetric Synthesis of Cyclobutanone via Lewis Acid Catalyzed Tandem Cyclopropanation/Semipinacol Rearrangement

Chiral Lewis acid catalyzed asymmetric formation of cyclobutanones from α-silyloxyacroleins and α-alkyl or α-aryl diazoesters has been developed. In the presence of a chiral oxazaborolidinium ion catalyst, various α-silyloxycyclobutanones possessing a chiral β-quaternary center were synthesized in high yield (up to 91%) with excellent enantio- and diastereoselectivity (up to 98% ee and up to >20:1 dr) through tandem cyclopropanation/semipinacol rearrangement. The synthetic potential of this method was illustrated by conversion of the product to various cyclic compounds such as γ-lactone, cyclobutanol, and cyclopentanone.

Catalytic Cyclopropanol Ring Opening for Divergent Syntheses of γ-Butyrolactones and δ-Ketoesters Containing All-Carbon Quaternary Centers

Catalytic ring opening cross coupling reactions of strained cyclopropanols have been useful for the syntheses of various β-substituted carbonyl products. Among these ring opening cross coupling reactions, the formation of α,β-unsaturated enone byproducts often competes with the desired cross coupling processes and has been a challenging synthetic problem to be addressed. Herein, we describe our efforts in developing divergent syntheses of a wide range of γ-butyrolactones and δ-ketoesters containing all-carbon quaternary centers via copper-catalyzed cyclopropanol ring opening cross couplings with 2-bromo-2,2-dialkyl esters. Our mechanistic studies reveal that unlike the previously reported cases, the formation of α,β-unsaturated enone intermediates is actually essential for the γ-butyrolactone synthesis and also contributes to the formation of the δ-ketoester product. The γ-butyrolactone synthesis is proposed to go through an intermolecular radical conjugate addition to the in situ generated α,β-unsaturated enone followed by an intramolecular radical cyclization to the ester carbonyl double bond. The reactions are effective to build all-carbon quaternary centers and have broad substrate scope.

Catalytic Dearomative Spirocyclization via Gold Carbene Species Derived from Ynamides: Efficient Synthesis of 2-Azaspiro[4.5]decan-3-ones

An intramolecular catalytic dearomatization of phenols via gold carbene species proceeded to provide 2-azaspiro[4.5]decan-3-ones. The use of NHC ligand and water as a co-solvent was critical for achieving high reactivity. This reaction did not require hazardous diazo compounds as carbene sources and proceeded even under air. The obtained spirocyclic product could be readily transformed into a gabapentin derivative by hydrogenation and deprotection.

Synthesis of C2-Symmetric gem-Difluoromethylenated Angular Triquinanes

A synthesis of symmetrical gem-difluoromethylenated angular triquinanes is described. The synthetic strategy involved sequential fluoride-catalyzed nucleophilic addition of PhSCF₂SiMe₃ (1) to 2,2-diallylated or 2,2-dipropargylated indane-1,3-diones 2 followed by stereoselective radical cyclization of the resulting adducts 3 to provide the cyclized gem-difluoromethylenated diquinanes 4 as a mixture of stereoisomers. Repeated addition of 1 to 4 followed by cyclization resulted in the stereoselective synthesis of the desired C₂-symmetric gem-difluoromethylenated angular triquinanes 6 in good yields with high stereoselectivity.

The synthesis of 2,3,6-trisubstituted 1-oxo-1,2-dihydroisoquinolines as potent CRTh2 antagonists

New synthetic methods were developed for the preparation of 2,3,6-trisubstituted 1-oxo-1,2-dihydroisoquinolines as CRTh₂ antagonists. The isoquinolinone core could be constructed before the introduction of substitution groups or synthesized through a catalytic intramolecular cyclization reaction with desired substitution groups properly installed. These synthetic strategies have helped to accelerate the SAR development of this series, and potent lead compounds were identified in both the CRTh₂ receptor binding assay and the CD11b biomarker assay.

Enantioselective gold(i)-catalyzed rearrangement of cyclopropyl-substituted 1,6-enynes into 2-oxocyclobutyl-cyclopentanes

A gold(i)-catalyzed cycloisomerization/ring expansion sequence allows the highly enantioselective synthesis of 2-oxocyclobutylcyclopentane derivatives from cyclopropyl-substituted enynes (up to 99% ee).

Photoredox meets gold Lewis acid catalysis in the alkylative semipinacol rearrangement: a photocatalyst with a dark side

The alkylative semipinacol rearrangement of a variety of TMS protected α-styrenyl substituted cyclic alcohols with unactivated bromoalkanes that merge photoredox and Au(i)/Au(iii) catalysis has been achieved.

Gold(i)-catalyzed addition of aldehydes to cyclopropylidene bearing 6-aryl-1,5-enynes

A diastereoselective, gold-catalyzed cascading cycloisomerization of alkylidene cyclopropane bearing 1,5-enynes that terminates in a cyclo-addition of aldehydes has been developed. This diastereoselective reaction provides convergent access to novel polycyclic molecular structures (18 examples), and tolerates a diverse scope of aldehydes. Mechanistic studies reveal that the catalytic cycle rests at a digold off-cycle intermediate, one of which was isolated.

Divergent reaction pathways in gold-catalyzed cycloisomerization of 1,5-enynes containing a cyclopropane ring: dramatic ortho substituent and temperature effects

A gold(i)-catalyzed cycloisomerization of easily available 1,5-enynes containing a cyclopropane ring has been developed, efficiently providing cyclobutane-fused 1,4-cyclohexadiene, tricyclic cyclobutene, biscyclopropane and 1,3-cyclohexadiene derivatives in moderate to excellent yields. When the phenyl group was not ortho substituted, 1,4-cyclohexadienes could be produced. With an ortho substituent, three different products could be selectively synthesized by control of the temperature and the used gold(i) catalyst. The 1,5-enyne substrate first undergoes a classical enyne cycloisomerization to form a tricyclic cyclobutene key intermediate, which undergoes subsequent transformation to produce the desired products. A plausible reaction mechanism was proposed according to deuterium labeling experiments and intermediate trapping experiments, as well as DFT calculations. In our current reaction, the ortho substituent on the phenyl group controls the reaction outcome and the ortho substituent effect was found to originate from steric and electronic factors.

Platinum-catalyzed cycloisomerizations of a common enyne: a divergent entry to cyclopropane sesquiterpenoids. Formal synthesis of sarcandralactone A

A common enyne scaffold, resembling the structures of natural elemanes was found to be an excellent substrate for highly regioselective cycloisomerizations to produce diverse cyclopropane sesquiterpenoids. Platinum-catalysis was utilized to produce either lindenane or myliol cores, found in natural products, starting from enyne acetate 10 and its corresponding allene 12 respectively. Based on this concept, a second generation strategy allows the formal synthesis of sarcandralactone A.