Development of Platinum(II) and -(IV) CNC Pincer Complexes and Their Application in a Hydrovinylation Reaction

Synthesis, Characterization, and Spectroscopic Studies of 2,6-Dimethylpyridyl-Linked Cu(I)-CNC Complexes: The Electronic Influence of Aryl Wingtips on Copper Centers

Six new Cu(I) complexes containing pincer ligands of the type 2,6-bis(3-alkyl/arylimidazol-2-ylidene) methylpyridine I(R/R'Ar) ĈN̂C, where R = trifluoroethyl (TFE) and R' = 4-CF3, 4-NO2, 4-CN, 4-H, and 4-CH3, have been synthesized. These complexes, namely, [Cu(I(TFE)ĈN̂C)]PF6, 1-TFE; [Cu(ICF3Ar ĈN̂C]PF6, 2-CF3; [Cu(INO2Ar ĈN̂C)]PF6, 3-NO2; [Cu(ICNAr ĈN̂C]PF6, 4-CN; [Cu(IHAr ĈN̂C)]2(PF6)2, 5-H; and [Cu(ICH3Ar ĈN̂C)]2(PF6)2, 6-CH3, were fully characterized by 1H, 13C, and HMBC NMR spectroscopy, elemental analysis, electrochemical studies, and single-crystal X-ray crystallography. The crystallographic data revealed different structures and copper nuclearities for the complexes bearing aryl wingtips with electron-withdrawing (2-CF3, 3-NO2, and 4-CN) and electron-donating (5-H and 6-CH3) substituents. The solution-phase conductivity measurements in acetonitrile revealed a mix-electrolyte behavior for these complexes, supporting the presence of both mono- and binuclear forms of each complex. The fast monomer-dimer equilibrium of the Cu-CNC complexes at room temperature is reflected in their simple 1H NMR spectra in acetonitrile. However, both mono- and binuclear forms were identifiable in 1H diffusion-ordered spectroscopy (DOSY) at low temperatures. The dynamic behavior of these complexes in solution was further examined by variable-temperature 1H NMR (VT 1H NMR) experiments, and the relevant thermodynamic parameters were determined. The process was also probed by one-dimensional rotating-frame Overhauser enhancement spectroscopy (1D ROESY) experiments to elucidate the coexisting species in solution. The 2,6-dimethylpyridyl-linked Cu-CNC complexes also presented a quasi-reversible Cu(II)/Cu(I) couple in cyclic voltammetry studies, wherein a clear influence of the aryl wingtips on the E1/2 values was observed. Furthermore, the percent buried volumes (% Vbur) of the complexes were calculated, showing a similar steric hindrance around copper in all complexes. These findings support the importance of electronic effects, induced by the aryl wingtips, on the preferred coordination geometry, copper nuclearity, and redox properties of the Cu-CNC complexes.

Non-Palindromic C∧C∧P Platinum and Palladium Pincer Complexes Showing Intense Phosphorescence via Direct Spin-Forbidden S0 → T1 Excitation

The synthesis of C∧C∧P pre-ligands based on a dicyclohexylphosphine-substituted biphenyl framework is reported. The pre-ligands form the respective non-palindromic pincer complexes of PtII and PdII via double oxidative addition and subsequent comproportionation or C-H activation. The complexes of PtII as well as PdII emit similar green phosphorescence efficiently in the solid state, the former also in solution albeit with less intensity. The most fascinating photophysical feature, however, is a direct singlet-triplet (S0 → T1) excitation of this phosphorescence in the spectral window between the emission and the major singlet-singlet UV absorption. The S0 → T1 excitation spectra show a rich vibronic pattern, which is especially pronounced for the solid samples at cryogenic temperatures. The molar extinction of the lowest-energy singlet-triplet absorption band of the homologous Pt and Pd complexes as well as that of the Pt complex with a different (NHC) ancillary ligand were determined in tetrahydrofuran solutions. Quantum efficiencies of triplet formation (by intersystem crossing) via the "standard" excitation pathway S0 → Sn → T1 were determined for the Pt complexes and found to be different in dependence of the ancillary ligand.

Noble Metal Complexes of a Bis-Caffeine Containing NHC Ligand

N-Heterocyclic carbenes (NHCs) have seen more and more use over the years. The go-to systems that are usually considered are derivatives of benzimidazole or imidazole. Caffeine possesses an imidazole unit and was already utilized as a carbene-type ligand; however, its use within a tridentate bis-NHC system has—to the best of our knowledge—not been reported so far. The synthesis of the ligand is straightforward and metal complexes are readily available via silver-salt metathesis. A platinum(II) and a palladium(II) complex were isolated and a crystal structure of the former was examined. For the Pt(II) complex, luminescence is observed in solid state as well as in solution.

Direct Arylation in the Presence of Palladium Pincer Complexes

Direct arylation is an atom-economical alternative to more established procedures such as Stille, Suzuki or Negishi arylation reactions. In comparison with other palladium sources and ligands, the use of palladium pincer complexes as catalysts or pre-catalysts for direct arylation has resulted in improved efficiency, higher reaction yields, and advantageous reaction conditions. In addition to a revision of the literature concerning intra- and intermolecular direct arylation reactions performed in the presence of palladium pincer complexes, the role of these remarkably active catalysts will also be discussed.

A serendipitous self-assembly synthesis of CNN–Pt pincer complexes

A serendipitous one pot self-assembly synthesis of hydride CNN–Pt(iv) pincer complexes was achieved, which involves a formal C–H bond activation, with an earlier C–N bond formation via C–Br bond excision, instead of the expected rollover complex.

Recent Progress with Pincer Transition Metal Catalysts for Sustainability

Our planet urgently needs sustainable solutions to alleviate the anthropogenic global warming and climate change. Homogeneous catalysis has the potential to play a fundamental role in this process, providing novel, efficient, and at the same time eco-friendly routes for both chemicals and energy production. In particular, pincer-type ligation shows promising properties in terms of long-term stability and selectivity, as well as allowing for mild reaction conditions and low catalyst loading. Indeed, pincer complexes have been applied to a plethora of sustainable chemical processes, such as hydrogen release, CO2 capture and conversion, N2 fixation, and biomass valorization for the synthesis of high-value chemicals and fuels. In this work, we show the main advances of the last five years in the use of pincer transition metal complexes in key catalytic processes aiming for a more sustainable chemical and energy production.

Enhancing the catalytic properties of well-defined electrophilic platinum complexes

Platinum complexes have been often considered as the least reactive of the group 10 triad metals. Slow kinetics are behind this lack of reactivity but, still, some industrially relevant catalytic process are dominated by platinum compounds and sometimes different selectivities can be found in comparison to Ni or Pd. Nevertheless, during the last years, it has been reported that the catalytic behaviour of well-defined platinum derivatives can be improved through a judicious choice of their electronic and steric properties, leading to highly electrophilic or low-electron count platinum systems. In this feature article, we highlight some catalytic processes in which well-defined electrophilic platinum complexes or coordinatively unsaturated systems play an important role in their catalytic activity.

Synthetic access to a phosphorescent non-palindromic pincer complex of palladium by a double oxidative addition – comproportionation sequence

A highly phosphorescent non-palindromic (C^C^N) palladium complex may be prepared by means of a double oxidative addition – comproportionation sequence, which is a new approach for the synthesis of non-palindromic pincer complexes.

Relative stabilities of M/NHC complexes (M = Ni, Pd, Pt) against R-NHC, X-NHC and X-X couplings in M(0)/M(ii) and M(ii)/M(iv) catalytic cycles: a theoretical study

The complexes of Ni, Pd, and Pt with N-heterocyclic carbenes (NHCs) catalyze numerous organic reactions via proposed typical M⁰/M^II catalytic cycles comprising intermediates with the metal center in (0) and (II) oxidation states. In addition, M^II/M^IV catalytic cycles have been proposed for a number of reactions. The catalytic intermediates in both cycles can suffer decomposition via R-NHC coupling and the side reductive elimination of the NHC ligand and R groups (R = alkyl, aryl, etc.) to give [NHC-R]⁺ cations. In this study, the relative stabilities of (NHC)M^II(R)(X)L and (NHC)M^IV(R)(X)₃L intermediates (X = Cl, Br, I; L = NHC, pyridine) against R-NHC coupling and other decomposition pathways via reductive elimination reactions were evaluated theoretically. The study revealed that the R-NHC coupling represents the most favorable decomposition pathway for both types of intermediates (M^II and M^IV), while it is thermodynamically and kinetically more facile for the M^IV complexes. The relative effects of the metal M (Ni, Pd, Pt) and ligands L and X on the R-NHC coupling for the M^IV complexes were significantly stronger than that for the M^II complexes. In particular, for the (NHC)₂M^IV(Ph)(Br)₃ complexes, Ph-NHC coupling was facilitated dramatically from Pt (ΔG = -36.9 kcal mol^-1, ΔG^≠ = 37.5 kcal mol^-1) to Pd (ΔG = -61.5 kcal mol^-1, ΔG^≠ = 18.3 kcal mol^-1) and Ni (ΔG = -80.2 kcal mol^-1, ΔG^≠ = 4.7 kcal mol^-1). For the M^II oxidation state of the metal, the bis-NHC complexes (L = NHC) were slightly more kinetically and thermodynamically stable against R-NHC coupling than the mono-NHC complexes (L = pyridine). An inverse relation was observed for the M^IV oxidation state of the metal as the (NHC)₂M^IV(R)(X)₃ complexes were kinetically (4.3-15.9 kcal mol^-1) and thermodynamically (8.0-23.2 kcal mol^-1) significantly less stable than the (NHC)M^IV(R)(X)₃L (L = pyridine) complexes. For the Ni^IV and Pd^IV complexes, additional decomposition pathways via the reductive elimination of the NHC and X ligands to give the [NHC-X]⁺ cation (X-NHC coupling) or reductive elimination of the X-X molecule were found to be thermodynamically and kinetically probable. Overall, the obtained results demonstrate significant instability of regular Ni/NHC and Pd/NHC complexes (for example, not additionally stabilized by chelation) and high probability to initiate "NHC-free" catalysis in the reactions comprising M^IV intermediates.

Bis-tridentate IrIII Phosphors Bearing Two Fused Five-Six-Membered Metallacycles: A Strategy to Improved Photostability of Blue Emitters

Iridium complexes bearing chelating cyclometalates are popular choices as dopant emitters in the fabrication of organic light-emitting diodes (OLEDs). In this contribution, we report a series of blue-emitting, bis-tridentate Ir^III complexes bearing chelates with two fused five-six-membered metallacycles, which are in sharp contrast to the traditional designs of tridentate chelates that form the alternative, fused five-five metallacycles. Five Ir^III complexes, Px-21-23, Cz-4, and Cz-5, have been synthesized that contain a coordinated dicarbene pincer chelate incorporating a methylene spacer and a dianionic chromophoric chelate possessing either a phenoxy or carbazolyl appendage to tune the coordination arrangement. All these tridentate chelates afford peripheral ligand-metal-ligand bite angles of 166-170°, which are larger than the typical bite angle of 153-155° observed for their five-five-coordinated tridentate counterparts, thereby leading to reduced geometrical distortion in the octahedral frameworks. Photophysical measurements and TD-DFT studies verified the inherent transition characteristics that give rise to high emission efficiency, and photodegradation experiments confirmed the improved stability in comparison with the benchmark fac-[Ir(ppy)₃ ] in degassed toluene at room temperature. Phosphorescent OLED devices were also fabricated, among which the carbazolyl-functionalized emitter Cz-5 exhibited the best performance among all the studied bis-tridentate phosphors, showing a maximum external quantum efficiency (EQE_max ) of 18.7 % and CIE_x,y coordinates of (0.145, 0.218), with a slightly reduced EQE of 13.7 % at 100 cd m^-2 due to efficiency roll-off.

A Novel Family of Polyiodo-Bromoantimonate(III) Complexes: Cation-Driven Self-Assembly of Photoconductive Metal-Polyhalide Frameworks

In the presence of different cations, reactions of [SbBr₆ ]^3- and I₂ result in a new family of diverse supramolecular 1D polyiodide-bromoantimonate networks. The coordination number of Sb, as well as geometry of assembling {I_x }^n- polyhalide units, can vary, resulting in unprecedented structural types. The nature of I⋅⋅⋅Br interactions was studied by DFT calculations; estimated energy values are 1.6-6.9 kcal mol^-1 . Some of the compounds showed strong photoconductivity in thin films, suggesting multiple feasible applications in optoelectronics and solar energy conversion.

Synthesis and comparison of nickel, palladium, and platinum bis(N-heterocyclic carbene) pincer complexes for electrocatalytic CO2 reduction

A valence isoelectronic and isostructural series of charged bis(N-heterocyclic carbene) pincer complexes [M(bC^N^bC)X]OTf and [M(bC^N^bC)CH₃CN](OTf)₂ (where M = Ni, Pd, and Pt, bC^N^bC = 1,1'-(pyridine-2,6-diylbis(methylene))bis(3-butylbenzo[d]imidazol-2-ylidene)) were synthesized, characterized, modelled by density functional theory calculations, and compared for their electrochemical properties and reactivity with CO₂. Although the electrochemical response of each complex is altered by the presence of CO₂, controlled potential electrolysis experiments demonstrated the superior ability of [Pd] to reduce CO₂ to CO in faradaic efficiencies up to 58% in the presence of trifluoroacetic acid, compared to [Pt] and [Ni] which showed only marginal production of CO, giving the trend [Pd] ≫ [Pt] > [Ni] for this series.

Metalation behavior of a bis-saturated NHC ligand with a flexible m-xylyl linker

The final bis saturated N-heterocyclic carbene pincer proligand has been synthesized but refuses attempts at C–H activation.

Biomimetic Platinum-Promoted Polyene Polycyclizations: Influence of Alkene Substitution and Pre-cyclization Conformations

Results of kinetic experiments and quantum chemical computations on a series of platinum-promoted polycyclization reactions are described. Analyses of these results reveal a reactivity model that reaches beyond the energetics of the cascade itself, incorporating an ensemble of pre-cyclization conformations of the platinum-alkene reactant complex, only a subset of which are productive for bi- (or larger) cyclization and lead to products. Similarities and differences between this scenario, including reaction coordinates for polycyclization, for platinum- and enzyme-promoted polycyclization reactions are highlighted.

NHC-based pincer ligands: carbenes with a bite

In this frontier article we overview the emergence and scope of NHC-based CCC and CNC pincer systems, i.e. complexes containing mer-tridentate ligands bearing two NHC donor groups, comment on their effectiveness in applications, and highlight areas for future development and exploitation.

Expedient Mechanosynthesis of N,N-Dialkyl Imidazoliums and Silver(I)-Carbene Complexes in a Ball-Mill

The absence of solvent, associated with intensive mechanical agitation, allowed the first mechanosynthesis of high-value silver(I)-carbene complexes and the corresponding N,N-dialkylimidazolium precursors. This procedure gave outstanding results in terms of yield and reaction time, when compared to solution-based conditions previously described in literature, and was generalized to unprecedented compounds. Silver(I)-carbene complexes could either be obtained from N,N-dialkylimidazolium salts or directly from imidazole and alkyl halides in a one-pot two-step procedure without isolating the imidazolium intermediate. Additionally, an efficient one-pot three-step sequence, including imidazole alkylation, silver metalation, and transmetalation is reported.

Ruthenium(II) Complexes Containing Lutidine-Derived Pincer CNC Ligands: Synthesis, Structure, and Catalytic Hydrogenation of C-N bonds

A series of Ru complexes containing lutidine-derived pincer CNC ligands have been prepared by transmetalation with the corresponding silver-carbene derivatives. Characterization of these derivatives shows both mer and fac coordination of the CNC ligands depending on the wingtips of the N-heterocyclic carbene fragments. In the presence of tBuOK, the Ru-CNC complexes are active in the hydrogenation of a series of imines. In addition, these complexes catalyze the reversible hydrogenation of phenantridine. Detailed NMR spectroscopic studies have shown the capability of the CNC ligand to be deprotonated and get involved in ligand-assisted activation of dihydrogen. More interestingly, upon deprotonation, the Ru-CNC complex 5 e(BF4 ) is able to add aldimines to the metal-ligand framework to yield an amido complex. Finally, investigation of the mechanism of the hydrogenation of imines has been carried out by means of DFT calculations. The calculated mechanism involves outer-sphere stepwise hydrogen transfer to the C-N bond assisted either by the pincer ligand or a second coordinated H2 molecule.

Synthesis and reactivity of NHC-based rhodium macrocycles

Using a general synthetic procedure employing readily accessed terminal alkene-functionalized pro-ligands and macrocyclization by ring-closing olefin metathesis, rhodium carbonyl complexes have been prepared that contain lutidine (1a; n = 1) and pyridine (1b; n = 0) derived tridentate CNC macrocycles with dodecamethylene spacers. In solution, 1a shows temperature-invariant time-averaged C2 symmetry by (1)H NMR spectroscopy (CD2Cl2, 500 MHz), whereas in the solid-state, two polymorphs can be obtained showing different conformations of the alkyl spacer about the metal-carbonyl bond (asymmetric and symmetric). In contrast, time-averaged motion of alkyl spacer in 1b can be halted by cooling below 225 K (CD2Cl2, 500 MHz), and the complex crystallizes as a dimer with an interesting unsupported Rh···Rh bonding interaction (3.2758(6) Å). Oxidative addition reactions of 1a and 1b, using MeI and PhICl2, have been studied in situ by (1)H NMR spectroscopy, although pure Rh(III) adducts can be ultimately isolated only with the pyridine-based macrocyclic ligand. The lutidine backbone of 1a can be deprotonated by addition of K[N(SiMe3)2], and the resulting neutral dearomatized complex (5) has been fully characterized in solution, by variable-temperature (1)H NMR spectroscopy, and in the solid state, by X-ray diffraction.

Diastereoselective Pt catalyzed cycloisomerization of polyenes to polycycles

Application of a tridentate NHC containing pincer ligand to Pt catalyzed cascade cyclization reactions has allowed for the catalytic, diastereoselective cycloisomerization of biogenic alkene terminated substrates to the their polycyclic counterparts.

Donor functionalized ruthenium N-heterocyclic carbene complexes in alcohol oxidation reactions

Ruthenium chelates bearing N^C^O-donors in bidentate or pincer coordination modes have been prepared. The ruthenium pincer complex catalyses the oxidation of alcohols to the corresponding aldehydes with yields as high as 99%.

Synthesis, structure and dynamics of NHC-based palladium macrocycles

A series of macrocyclic CNC pincer pro-ligands based on bis(imidazolium)lutidine salts with octa-, deca- and dodecamethylene spacers have been prepared and their coordination chemistry investigated. Using a Ag2O based transmetallation strategy, cationic palladium(II) chloride complexes [PdCl{CNC-(CH2)n}][BAr(F)4] (n = 8, 10, 12; Ar(F) = 3,5-C6H3(CF3)2) were prepared and fully characterised in solution, by NMR spectroscopy and ESI-MS, and in the solid-state, by X-ray crystallography. The smaller macrocyclic complexes (n = 8 and 10) exhibit dynamic behaviour in solution, involving ring flipping of the alkyl spacer across the Pd-Cl bond, which was interrogated by variable temperature NMR spectroscopy. In the solid-state, distorted coordination geometries are observed with the spacer skewed to one side of the Pd-Cl bond. In contrast, a static C2 symmetric structure is observed for the dodecamethylene based macrocycle. For comparison, palladium(II) fluoride analogues [PdF{CNC-(CH2)n}][BAr(F)4] (n = 8, 10, 12) were also prepared and their solution and solid-state structures contrasted with those of the chlorides. Notably, these complexes exhibit very low frequency (19)F chemical shifts (ca. -400 ppm) and the presence of C-H···F interactions ((2h)J(FC) coupling observed by (13)C NMR spectroscopy). The dynamic behaviour of the fluoride complexes is largely consistent with the smaller ancillary ligand; [PdF{CNC-(CH2)8}][BAr(F)4] exceptionally shows C(2v) time averaged symmetry in solution at room temperature (CD2Cl2, 500 MHz) as a consequence of dual fluxional processes of the pincer backbone and alkyl spacer.

True and masked three-coordinate T-shaped platinum(II) intermediates

Although four-coordinate square-planar geometries, with a formally 16-electron counting, are absolutely dominant in isolated Pt(II) complexes, three-coordinate, 14-electron Pt(II) complexes are believed to be key intermediates in a number of platinum-mediated organometallic transformations. Although very few authenticated three-coordinate Pt(II) complexes have been characterized, a much larger number of complexes can be described as operationally three-coordinate in a kinetic sense. In these compounds, which we have called masked T-shaped complexes, the fourth position is occupied by a very weak ligand (agostic bond, solvent molecule or counteranion), which can be easily displaced. This review summarizes the structural features of the true and masked T-shaped Pt(II) complexes reported so far and describes synthetic strategies employed for their formation. Moreover, recent experimental and theoretical reports are analyzed, which suggest the involvement of such intermediates in reaction mechanisms, particularly C-H bond-activation processes.