Synthesis and Structure of Group 4 Symmetric Amidinate Complexes and Their Reactivity in the Polymerization of α-Olefins

N-aryloxide-amidinate group 4 metal complexes

A N-aryloxide-amidine ligand (H3L), integrating phenoxide (PhO-) and amidine ligands through methylene linkers, has been synthesized from 2-(aminomethyl)-6-(tert-butyl)phenol in two steps. Upon reacting the deprotonated H3L ligand with group 4 metal chloride MIVCl4, a corresponding (LMIV-Cl)2 dimer could be obtained. The coordination modes exhibit variation depending on the radius of the metal ions. In the case of (LTiIV-Cl)2, the two ArO- arms from the same ligand bond to two different Ti(IV) centers, while in the case of (LZrIV/HfIV-Cl)2, both ArO- arms coordinate with the same metal center. Moreover, the two C-N bonds in the amidinate moiety are localized in (LTiIV-Cl)2, whereas they delocalize in (LZrIV-Cl)2. Notably, (LHfIV-Cl)2 could further react with one equivalent of HfCl4, yielding the binuclear metal azide in the presence of KN3 and LiCl, where the coordination mode of the amidinate moiety changed from the bidentate chelating type to the bimetallic bridging coordination.

Guerbet upgrading of ethanol to n-butanol using Ru(iii) catalysts under air

A series of in situ prepared Ru(iii) complexes supported by easily accessible N-donor organic pincer ligands were used as catalysts in the Guerbet upgrading reaction of ethanol under aerobic conditions.

2-(Arylimino)benzylidene-8-arylimino-5,6,7-trihydroquinoline Cobalt(II) Dichloride Polymerization Catalysts for Polyethylenes with Narrow Polydispersity

A series of 2-(arylimino)benzylidene-8-arylimino-5,6,7-trihydroquinoline cobalt(II) chlorides (Co1–Co6) containing a fused ring and a more inert phenyl group as the substituent at the imino-C atom has been synthesized using a one-pot synthesis method and fully characterized by FT-IR and elemental analysis. The molecular structures of Co2 and Co5 have been confirmed by X-ray diffraction as having a distorted square pyramidal geometry around a cobalt core with a tridentate N,N,N-chelating ligand and two chlorides. On activation with either methylaluminoxane (MAO) or modified methylaluminoxane (MMAO), Co1–Co6 exhibited high activities for ethylene polymerization. The least sterically hindered Co2 showed a maximum activity of 16.51 × 106 g (PE) mol−1 (Co) h−1 at a moderate temperature 50 °C. Additionally, ortho-fluoride Co6 was able to maintain a high activity not only at 70 °C but also after 60 min at 50 °C, highlighting its excellent thermal-stability and long catalytic lifetime. The resultant polyethylene showed clearly narrower molecular weight distribution (PDI: 1.3–3.1) than those produced by structurally related cobalt counterparts, indicating the positive influence of benzhydryl substitution on the catalysis. Moreover, the molecular weight (1.7–386.6 kg mol−1) of vinyl- or n-propyl-terminated polyethylene can be finely regulated by controlling polymerization parameters.

LLDPE-like Polymers Accessible via Ethylene Homopolymerization Using Nitro-Appended 2-(Arylimino)pyridine-nickel Catalysts

Four examples of para-nitro substituted 2-(arylimino)pyridine-nickel(II) bromide complexes of general formula, [2-{(2,6-R-4-NO2C6H2)N=CMe}C5H4N]NiBr2, but differentiable by the steric/electronic properties displayed by the ortho-groups [R = i-Pr (Ni1), Et (Ni2), CHPh2 (Ni3), CH(4-FPh)2 (Ni4)], have been prepared in good yield. For comparative purposes, the meta-nitro complex, [2-{(2,6-i-Pr2-3-NO2-4-(4-FPh)2C6H)N=CMe}C5H4N]NiBr2 (Ni5), has also been synthesized. The molecular structures of mononuclear Ni3·xH2O (x = 2, 3) and bromide-bridged dinuclear Ni4 and Ni5 are disclosed. Upon activation with either ethylaluminum dichloride (EtAlCl2) or modified methylaluminoxane (MMAO), all precatalysts displayed good catalytic performance at operating temperatures between 30 °C and 60 °C with higher activities generally seen using EtAlCl2 [up to 4.7 × 106 g PE (mol of Ni)−1 h−1]: Ni2 ~ Ni5 > Ni1 ~ Ni4 > Ni3. In terms of the resultant polyethylene (PE), Ni4/EtAlCl2 formed the highest molecular weight of the series (Mw up to 1.4 × 105 g mol−1) with dispersities (Mw/Mn) ranging from narrow to broad (Mw/Mn range: 2.2–24.4). Moreover, the melting temperatures (Tm) of the polymers generated via EtAlCl2 activation fell in a narrow range, 117.8–126.0 °C, which resembles that seen for industrial-grade linear-low density polyethylene (LLDPE). Indeed, their 13C NMR spectra revealed significant amounts of uniformly distributed long-chain branches (LCBs), while internal vinylene groups constituted the major type of chain unsaturation [vinylene:vinyl = 5.3:1 (EtAlCl2) and 9.9:1 (MMAO)].

Hydroaminoalkylation for the Catalytic Addition of Amines to Alkenes or Alkynes: Diverse Mechanisms Enable Diverse Substrate Scope

Hydroaminoalkylation is a powerful, atom-economic catalytic reaction for the reaction of amines with alkenes and alkynes. This C-H functionalization reaction allows for the atom-economic alkylation of amines using simple alkenes or alkynes as the alkylating agents. This transformation has significant potential for transformative approaches in the pharmaceutical, agrochemical, and fine chemical industries in the preparation of selectively substituted amines and N-heterocycles and shows promise in materials science for the synthesis of functional and responsive aminated materials. Different early transition-metal, late transition-metal, and photoredox catalysts mediate hydroaminoalkylation by distinct mechanistic pathways. These mechanistic insights have resulted in the development of new catalysts and reaction conditions to realize hydroaminoalkylation with a broad range of substrates: activated and unactivated, terminal and internal, C-C double and triple bonds with aryl or alkyl primary, secondary, or tertiary amines, including N-heterocyclic amines. By deploying select catalysts with specific substrate combinations, control over regioselectivity, diastereoselectivity, and enantioselectivity has been realized. Key barriers to widespread adoption of this reaction include air and moisture sensitivity for early transition-metal catalysts as well as a heavy dependence on amine protecting or directing groups for late transition-metal or photocatalytic routes. Advances in improved catalyst robustness, substrate scope, and regio-/stereoselective reactions with early- and late transition-metal catalysts, as well as photoredox catalysis, are highlighted, and opportunities for further catalyst and reaction development are included. This perspective shows that hydroaminoalkylation has the potential to be a disruptive and transformative strategy for the synthesis of selectively substituted amines and N-heterocycles from simple amines and alkenes.

Stereoselective Synthesis of Tertiary Allylic Amines by Titanium-Catalyzed Hydroaminoalkylation of Alkynes with Tertiary Amines

Intermolecular hydroaminoalkylation reactions of symmetrical and unsymmetrical alkynes with tertiary amines take place in the presence of catalytic amounts of TiBn₄, Ph₃C[B(C₆F₅)₄], and a sterically demanding aminopyridinato ligand precursor. The resulting products, synthetically and pharmaceutically useful tertiary β,γ‐disubstituted allylic amines, are formed in convincing yields and with excellent stereoselectivity. Particularly promising for future applications is the fact that even the industrial side product trimethylamine can be used as a substrate.

N-Heterocyclic carbene-carbodiimide (NHC-CDI) betaine adducts: synthesis, characterization, properties, and applications

N-Heterocyclic carbenes (NHCs) are an important class of reactive organic molecules used as ligands, organocatalysts, and σ-donors in a variety of electroneutral ylide or betaine adducts with main-group compounds. An emerging class of betaine adducts made from the reaction of NHCs with carbodiimides (CDIs) form zwitterionic amidinate-like structures with tunable properties based on the highly modular NHC and CDI scaffolds. The adduct stability is controlled by the substituents on the CDI nitrogens, while the NHC substituents greatly affect the configuration of the adduct in the solid state. This Perspective is intended as a primer to these adducts, touching on their history, synthesis, characterization, and general properties. Despite the infancy of the field, NHC-CDI adducts have been applied as amidinate-type ligands for transition metals and nanoparticles, as junctions in zwitterionic polymers, and to stabilize distonic radical cations. These applications and potential future directions are discussed.

Predicting molecular isomerism of symmetrical and unsymmetrical N,N′-diphenyl formamidines in the solid-state: crystal structure, Hirshfeld surface analysis, pairwise interaction energy, and ΔHfusion and ΔSfusion correlations

Correlating molecular isomerism of N,N′-diphenylformamidine derivatives in the solid state with molecular pairwise interaction energies, experimental enthalpy and entropy of fusion.

Linear Hydroaminoalkylation Products from Alkyl-Substituted Alkenes

The regioselective conversion of alkyl-substituted alkenes into linear hydroaminoalkylation products represents a strongly desirable synthetic transformation. In particular, such conversions of N-methylamine derivatives are of great scientific interest, because they would give direct access to important amines with unbranched alkyl chains. Herein, we present a new one-pot procedure that includes an initial alkene hydroaminoalkylation with an α-silylated amine substrate and a subsequent protodesilylation reaction that delivers linear hydroaminoalkylation products with high selectivity from simple alkyl-substituted alkenes. For that purpose, new titanium catalysts have been developed, which are able to activate the α-C-H bond of more challenging α-silylated amine substrates. In addition, a direct relationship between the ligand structure of the new catalysts and the obtained regioselectivity is described.

Fast Titanium-Catalyzed Hydroaminomethylation of Alkenes and the Formal Conversion of Methylamine

The scientific interest in catalytic hydroaminoalkylation reactions of alkenes has vastly increased over the past decade, but these reactions have struggled to become a viable option for general laboratory or industrial use because of reaction times of several days. The titanium-based catalytic system introduced in this work not only reduces the reaction time by several orders of magnitude, into the range of minutes, but the catalyst is also demonstrated to be easily available from common starting materials, at a cost of approximately 1 € per millimole of catalyst. We were also able to formally perform C-H activation of methylamine and achieve coupling to a broad variety of alkenes, through silyl protection of the amine and simple deprotection by water.

Titanium catalysis for the synthesis of fine chemicals – development and trends

Atlas as a Titan(ium) is holding the earth-abundant chemistry world. Titanium is the second most abundant transition metal, is a key player in important industrial processes (e.g. polyethylene) and shows much promise for diverse applications in the future.

Dimethylamine as a Substrate in Hydroaminoalkylation Reactions

Transition-metal-catalyzed hydroaminoalkylations of alkenes have made great progress over the last decade and are heading to become a viable alternative to the industrial synthesis of amines through hydroformylation of alkenes and subsequent reductive amination. In the past, one major obstacle of this progress has been an inability to apply these reactions to the most important amines, methylamine and dimethylamine. Herein, we report the first successful use of dimethylamine in catalytic hydroaminoalkylations of alkenes with good yields. We also report applicability for a variety of alkenes to show the tolerance of the reaction towards different functional groups. Additionally, we present a catalytic dihydroaminoalkylation reaction using dimethylamine, which has never been reported before.

Generation of TiII Alkyne Trimerization Catalysts in the Absence of Strong Metal Reductants

Low-valent Ti^II species have typically been synthesized by the reaction of Ti^IV halides with strong metal reductants. Herein we report that Ti^II species can be generated simply by reacting Ti^IV imido complexes with 2 equiv of alkyne, yielding a metallacycle that can reductively eliminate pyrrole while liberating Ti^II. In order to probe the generality of this process, Ti^II-catalyzed alkyne trimerization reactions were carried out with a diverse range of Ti^IV precatalysts.

Hydroaminoalkylation of Allylsilanes and a One-Pot Procedure for the Synthesis of 1,5-Benzoazasilepines

Allylsilanes undergo highly regioselective intermolecular alkene hydroaminoalkylation with secondary amines in the presence of a titanium mono(formamidinate) catalyst. Corresponding reactions of a suitable allyl(2-bromophenyl)silane which exclusively deliver the branched hydroaminoalkylation products combined with a subsequent Buchwald-Hartwig amination result in the development of an elegant one-pot procedure for the synthesis of literature-unknown silicon analogues of 1,5-benzodiazepines, the so-called 1,5-benzoazasilepines.

Synthesis of Ti, Zr, and Hf complexes with a new tetra-azane ligand by one-pot HCl-elimination and their properties as catalysts for production of UHMWPE

The first example for the HCl-elimination reaction being applied in the attachment of an amido-containing ligand to Zr and Hf.

Zn(ii) and Cu(ii) formamidine complexes: structural, kinetics and polymer tacticity studies in the ring-opening polymerization of ε-caprolactone and lactides

The flexibility of ligands and their coordination chemistry with metal centers provided effective catalysts in the ring opening polymerization of cyclic esters.

Intermolecular hydroaminoalkylation of alkenes and dienes using a titanium mono(formamidinate) catalyst

An easily accessible formamidinate ligand-bearing titanium complex initially synthesized by Eisen et al. is used as catalyst for intermolecular hydroaminoalkylation reactions of unactivated, sterically demanding 1,1- and 1,2-disubstituted alkenes and styrenes with secondary amines. The corresponding reactions, which have never been achieved with titanium catalysts before, take place with excellent regioselectivity (up to 99 : 1) and in addition, corresponding reactions of 1,3-butadienes with N-methylbenzylamine are also described for the first time.

Amidinate group 4 complexes in the polymerization of olefins

The current perspective will present the use of amidinate group 4 complexes in α-olefin polymerizations.

Dimethylsilyl bis(amidinate)actinide complexes: synthesis and reactivity towards oxygen containing substrates

Ligand1reacts with ThCl₄and UCl₄yielding complexes2and4, respectively. Complex3is obtained from complex2displaying extremely short Th–OH bond distances.