Identification and Quantification of Differentially Expressed Proteins in E-Cadherin Deficient SCC9 Cells and SCC9 Transfectants Expressing E-Cadherin by Dimethyl Isotope Labeling, LC−MALDI MS and MS/MS

Stable isotope dimethyl labelling for quantitative proteomics and beyond

Stable-isotope reductive dimethylation, a cost-effective, simple, robust, reliable and easy-to- multiplex labelling method, is widely applied to quantitative proteomics using liquid chromatography-mass spectrometry. This review focuses on biological applications of stable-isotope dimethyl labelling for a large-scale comparative analysis of protein expression and post-translational modifications based on its unique properties of the labelling chemistry. Some other applications of the labelling method for sample preparation and mass spectrometry-based protein identification and characterization are also summarized.This article is part of the themed issue 'Quantitative mass spectrometry'.

A sample preparation method for recovering suppressed analyte ions in MALDI TOF MS

In matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI TOF MS), analyte signals can be substantially suppressed by other compounds in the sample. In this technical note, we describe a modified thin-layer sample preparation method that significantly reduces the analyte suppression effect (ASE). In our method, analytes are deposited on top of the surface of matrix preloaded on the MALDI plate. To prevent embedding of analyte into the matrix crystals, the sample solution were prepared without matrix and efforts were taken not to re-dissolve the preloaded matrix. The results with model mixtures of peptides, synthetic polymers and lipids show that detection of analyte ions, which were completely suppressed using the conventional dried-droplet method, could be effectively recovered by using our method. Our findings suggest that the incorporation of analytes in the matrix crystals has an important contributory effect on ASE. By reducing ASE, our method should be useful for the direct MALDI MS analysis of multicomponent mixtures.

Analysis of the differentially expressed low molecular weight peptides in human serum via an N-terminal isotope labeling technique combining nano-liquid chromatography/matrix-assisted laser desorption/ionization mass spectrometry

RATIONALE

Peptidomics analysis of human serum is challenging due to the low abundance of serum peptides and interference from the complex matrix. This study analyzed the differentially expressed (DE) low molecular weight peptides in human serum integrating a DMPITC-based N-terminal isotope labeling technique with nano-liquid chromatography and matrix-assisted laser desorption/ionization mass spectrometry (nano-LC/MALDI-MS).

METHODS

The workflow introduced a [d(6)]-4,6-dimethoxypyrimidine-2-isothiocyanate (DMPITC)-labeled mixture of aliquots from test samples as the internal standard. The spiked [d(0)]-DMPITC-labeled samples were separated by nano-LC then spotted on the MALDI target. Both quantitative and qualitative studies for serum peptides were achieved based on the isotope-labeled peaks.

RESULTS

The DMPITC labeling technique combined with nano-LC/MALDI-MS not only minimized the errors in peptide quantitation, but also allowed convenient recognition of the labeled peptides due to the 6 Da mass difference. The data showed that the entire research procedure as well as the subsequent data analysis method were effective, reproducible, and sensitive for the analysis of DE serum peptides.

CONCLUSIONS

This study successfully established a research model for DE serum peptides using DMPITC-based N-terminal isotope labeling and nano-LC/MALDI-MS. Application of the DMPITC-based N-terminal labeling technique is expected to provide a promising tool for the investigation of peptides in vivo, especially for the analysis of DE peptides under different biological conditions.

Chromatographic behaviour of peptides following dimethylation with H2/D2-formaldehyde: implications for comparative proteomics

The differential separation of deuterated and non-deuterated forms of isotopically substituted compounds in chromatography is a well-known but not well-understood phenomenon. This separation is relevant in comparative proteomics, where stable isotopes are used for differential labelling and the effect of isotope resolution on quantitation has been used to disqualify some deuterium labelling methods in favour of heavier isotopes. In this work, a detailed evaluation of the extent of isotopic separation and its impact on quantitation was performed for peptides labelled through dimethylation with H(2)/D(2) formaldehyde. The chromatographic behaviour of 71 labelled peptide pairs from quadruplicate tryptic digests of bovine serum albumin were analysed, focusing on differences in median retention times, resolution, and relative quantitation for each peptide. For 94% of peptides, the retention time difference (heavy-light) was less than 12s with a median value 3.4s. With the exception of a single anomalous pair, isotope resolution was below 0.6 with a median value 0.11. Quantitative assessment indicates that the bias in ratio calculation introduced by retention time shifts is only about 3%, substantially smaller than the variation in ratio measurements themselves. Computational studies on the dipole moments of deuterated labels indicate that these results are consistent with literature suggestions that retention time shifts are inversely related to the polarity of the label. This study suggests that the incorporation of deuterium isotopes through peptide dimethylation at amine residues is a viable route to proteome quantitation.

Recent advances on multidimensional liquid chromatography-mass spectrometry for proteomics: from qualitative to quantitative analysis--a review

With the acceleration of proteome research, increasing attention has been paid to multidimensional liquid chromatography-mass spectrometry (MDLC-MS) due to its high peak capacity and separation efficiency. Recently, many efforts have been put to improve MDLC-based strategies including "top-down" and "bottom-up" to enable highly sensitive qualitative and quantitative analysis of proteins, as well as accelerate the whole analytical procedure. Integrated platforms with combination of sample pretreatment, multidimensional separations and identification were also developed to achieve high throughput and sensitive detection of proteomes, facilitating highly accurate and reproducible quantification. This review summarized the recent advances of such techniques and their applications in qualitative and quantitative analysis of proteomes.

Regulation of subcellular distribution and oncogenic potential of nucleophosmin by plakoglobin

Nucleophosmin (NPM) is a nucleolar phosphoprotein that is involved in many cellular processes and has both oncogenic and growth suppressing activities. NPM is localized primarily in nucleoli but shuttles between the nucleus and the cytoplasm, and sustained cytoplasmic distribution contributes to its tumor promoting activities. Plakoglobin (PG, γ-catenin) is a homolog of β-catenin with dual adhesive and signaling functions. These proteins interact with cadherins and mediate adhesion, while their signaling activities are regulated by association with various intracellular partners. Despite these similarities, β-catenin has a well-defined oncogenic activity, whereas PG acts as a tumor/metastasis suppressor through unknown mechanisms. Comparison of the proteomic profiles of carcinoma cell lines with low- or no PG expression with their PG-expressing transfectants has identified NPM as being upregulated upon PG expression. Here, we examined NPM subcellular distribution and in vitro tumorigenesis/metastasis in the highly invasive and very low PG expressing MDA-MB-231 (MDA-231) breast cancer cells and their transfectants expressing increased PG (MDA-231-PG) or NPM shRNA (MDA-231-NPM-KD) or both (MDA-231-NPM-KD+PG). Increased PG expression increased the levels of nucleolar NPM and coimmunoprecipitation studies showed that NPM interacts with PG. PG expression or NPM knockdown decreased the growth rate of MDA-231 cells substantially and this reduction was decreased further in MDA-231-NPM-KD+PG cells. In in vitro tumorigenesis/metastasis assays, MDA-231-PG cells showed substantially lower and MDA-231-NPM-KD cells substantially higher invasiveness relative to the MDA-231 parental cells, and the co-expression of PG and NPM shRNA led to even further reduction of the invasiveness of MDA-231-PG cells. Furthermore, examination of the levels and localization of PG and NPM in primary biopsies of metastatic infiltrating ductal carcinomas revealed coordinated expression of PG and NPM. Together, the data suggest that PG may regulate NPM subcellular distribution, which may potentially change the function of the NPM protein from oncogenic to tumor suppression.

Quantification of protein isoforms in mesenchymal stem cells by reductive dimethylation of lysines in intact proteins

Mass spectrometry (MS)-based quantification of highly homologous proteins in complex samples has proven difficult due to subtle sequence variations and the wide dynamic range of protein isoforms present. Herein, we report the use of reductive dimethylation on intact proteins to quantitatively compare protein isoform expression in the nucleus and cytoplasm of mesenchymal stem cells (MSC) and normal stroma. By coupling fixed-charge MS/MS scanning, high-resolution UPLC FT-MS data-dependent acquisition and MASCOT-based data mining, hydrogen/deuterium-labeled dimethyl-lysine peptides were simultaneously captured allowing the accurate comparison of 123 protein isoforms in parallel LC MS/MS runs. Thirty-four isoforms were identified that had expression levels specific to MSC. Where possible, proteomic analyses were verified by Western blotting and were demonstrated to be divergent from the level of gene transcription detected for certain proteins. Our analysis provides a protein isoform signature specific to MSC and demonstrates the suitability of dimethyl-lysine labeling on intact proteins for quantifying highly homologous proteins on a proteome-wide scale.

N,N-dimethyl leucines as novel isobaric tandem mass tags for quantitative proteomics and peptidomics

Herein, we describe the development and application of a set of novel N,N-dimethyl leucine (DiLeu) 4-plex isobaric tandem mass (MS(2)) tagging reagents with high quantitation efficacy and greatly reduced cost for neuropeptide and protein analysis. DiLeu reagents serve as attractive alternatives for isobaric tags for relative and absolute quantitation (iTRAQ) and tandem mass tags (TMTs) due to their synthetic simplicity, labeling efficiency, and improved fragmentation efficiency. DiLeu reagent resembles the general structure of a tandem mass tag in that it contains an amine reactive group (triazine ester) targeting the N-terminus and epsilon-amino group of the lysine side chain of a peptide, a balance group, and a reporter group. A mass shift of 145.1 Da is observed for each incorporated label. Intense a(1) reporter ions at m/z 115.1, 116.1, 117.1, and 118.1 are observed for all pooled samples upon MS(2). All labeling reagents are readily synthesized from commercially available chemicals with greatly reduced cost. Labels 117 and 118 can be synthesized in one step and labels 115 and 116 can be synthesized in two steps. Both DiLeu and iTRAQ reagents show comparable protein sequence coverage (approximately 43%) and quantitation accuracy (<15%) for tryptically digested protein samples. Furthermore, enhanced fragmentation of DiLeu labeling reagents offers greater confidence in protein identification and neuropeptide sequencing from complex neuroendocrine tissue extracts from a marine model organism, Callinectes sapidus.

A universal strategy for development of a method for absolute quantification of therapeutic monoclonal antibodies in biological matrices using differential dimethyl labeling coupled with ultra performance liquid chromatography-tandem mass spectrometry

Although the strategic use of enzymatic digestion combined with isotope dilution mass spectrometry has been increasingly developed and used for the absolute quantification of therapeutic and endogenous proteins in the biopharmaceutical industry over the past several years, the lack of an appropriate internal standard has become the rate-limiting step in the development of a standardized analytical approach to provide bioanalytical support for both preclinical and clinical studies. In this study, we present a universal strategy for fast development and validation (within 1-2 weeks) of a method for absolute quantification of a therapeutic monoclonal antibody in biological matrices using differential dimethyl labeling coupled with UPLC-MS/MS. Differential dimethyl labeling of tryptic peptides generated from the purified therapeutic monoclonal antibody and those derived from proteins in cynomolgus monkey serum with either d(2)- or d(0)-formaldehyde provided a fast, cost-effective, and standardized approach to generate internal standards for any surrogate peptides that are used to quantify the therapeutic monoclonal antibody in biological matrices. This labeling reaction employs inexpensive and commercially available reagents, d(0)- or d(2)-formaldehyde, to globally label the N-terminus and epsilon-amino group of Lys in a peptide via reductive amination. Moreover, the process is simple, relatively fast (<2 h reaction time), specific, and quantitative under mild reaction conditions. The chromatographic run time is 6 min per sample. The linearity of the assay for the selected monoclonal antibody was established from 1.00 to 1000 mug/mL with accuracy and precision within 15% at all concentrations. The intraday and interday assay accuracy (%RE) and coefficient of variations (CV%) are all within 15% for all QCs (2.00, 4.00, 20.0, 100, 750 mug/mL) prepared in three different serum pools from male and female cynomolgus monkeys.

Plakoglobin interacts with and increases the protein levels of metastasis suppressor Nm23-H2 and regulates the expression of Nm23-H1

Plakoglobin (gamma-catenin) is a homolog of beta-catenin with similar dual adhesive and signaling functions. The adhesive function of these proteins is mediated by their interactions with cadherins, whereas their signaling activity is regulated by association with various intracellular partners. In this respect, beta-catenin has a well-defined oncogenic activity through its role in the Wnt signaling pathway, whereas plakoglobin acts as a tumor/metastasis suppressor through mechanisms that remain unclear. We previously expressed plakoglobin in SCC9 squamous carcinoma cells (SCC9-P) and observed a mesenchymal-to-epidermoid transition. Comparison of the protein and RNA profiles of parental SCC9 cells and SCC9-P transfectants identified various differentially expressed proteins and transcripts, including the nonmetastatic protein 23 (Nm23). In this study, we show that Nm23-H1 mRNA and Nm23-H2 protein are increased after plakoglobin expression. Coimmunoprecipitation and confocal microscopy studies using SCC9-P and various epithelial cell lines with endogenous plakoglobin expression revealed that Nm23 interacts with plakoglobin, cadherins and alpha-catenin. Furthermore, Nm23-H2 is the primary isoform involved in these interactions, which occur prominently in the cytoskeleton-associated pool of cellular proteins. In addition, we show that plakoglobin-Nm23 interaction requires the N-terminal (alpha-catenin interacting) domain of plakoglobin. Our data suggest that by increasing the expression and stability of Nm23, plakoglobin has a role in regulating the metastasis suppressor activity of Nm23, which may further provide a potential mechanism for the tumor/metastasis suppressor function of plakoglobin itself.

Diethylation labeling combined with UPLC/MS/MS for simultaneous determination of a panel of monoamine neurotransmitters in rat prefrontal cortex microdialysates

The primary challenge associated with the development of an LC/MS/MS-based assay for simultaneous determination of biogenic monoamine neurotransmitters such as norepinephrine (NE), dopamine (DA), serotonin (5-HT), and normetanephrine (NM) in rat brain microdialysates is to improve detection sensitivity. In this work, a UPLC/ MS/MS-based method combined with a diethyl labeling technique was developed for simultaneous determination of a panel of monoamines in rat prefrontal cortex microdialysates. The chromatographic run time is 3.5 min/ sample. The limits of detection of the UPLC/MS/MS-based method for NE, DA, 5-HT/ and NM, with/without diethyl labeling of monoamines, are 0.005/0.4 (30/2367 pM), 0.005/0.1 (33/653 pM), 0.005/0.2 (28/1136 pM), and 0.002/0.2 ng/mL (11/1092 pM), respectively. Diethyl labeling of amino groups of monoamines affords 20-100 times increased detection sensitivity of corresponding native monoamines during the UPLC/MS/MS analysis. This could result from the following: (1) improved fragmentation patterns; (2) increased hydrophobicity and concomitantly increased ionization efficiency in ESI MS and MS/MS analysis; (3) reduced matrix interference. This labeling reaction employs a commercially available reagent, acetaldehyde-d4, to label the amine groups on the monoamines via reductive amination. It is also simple, fast (approximately 25-min reaction time), specific, and quantitative under mild reaction conditions. Data are also presented from the application of this assay to monitor the drug-induced changes of monoamine concentrations in rat prefrontal cortex microdialysate samples followed by administration of SKF 81297, a selective D1 dopamine receptor agonist known to elevate the extracellular level of the neurotransmitters DA and NE in the central nervous system.

Multiplex peptide stable isotope dimethyl labeling for quantitative proteomics

Accurate quantification of protein expression in biological systems is an increasingly important part of proteomics research. Incorporation of differential stable isotopes in samples for relative protein quantification has been widely used. Stable isotope incorporation at the peptide level using dimethyl labeling is a reliable, cost-effective and undemanding procedure that can be easily automated and applied in high-throughput proteomics experiments. Although alternative multiplex quantitative proteomics approaches introduce isotope labels at the organism level ('stable isotope labeling by amino acids in cell culture' (SILAC)) or enable the simultaneous analysis of eight samples (isobaric tagging for relative and absolute quantification (iTRAQ)), stable isotope dimethyl labeling is advantageous in that it uses inexpensive reagents and is applicable to virtually any sample. We describe in-solution, online and on-column protocols for stable isotope dimethyl labeling of sample amounts ranging from sub-micrograms to milligrams. The labeling steps take approximately 60-90 min, whereas the full protocol including digestion and (two-dimensional) liquid chromatography-mass spectrometry takes approximately 1.5-3 days to complete.

Quantitative matrix-assisted laser desorption/ionization mass spectrometry

This review summarizes the essential characteristics of matrix-assisted laser desorption/ionization (MALDI) time-of-flight mass spectrometry (TOF MS), especially as they relate to its applications in quantitative analysis. Approaches to quantification by MALDI-TOF MS are presented and published applications are critically reviewed.

Liquid chromatography MALDI MS/MS for membrane proteome analysis

Liquid chromatography (LC) can be combined with matrix-assisted laser-desorption ionization (MALDI) mass-spectrometry (MS) by using automated off-line fraction collection of eluates onto a MALDI plate. Commercial tandem MS systems are available for generating product ion spectra of MALDI-produced peptide ions. The MALDI MS/MS spectra can be searched against a proteome database for protein identification. In this chapter, a protocol of sequential solubilization and digestion of membrane proteins involving methanol- and SDS-assisted trypsin digestion and microwave-assisted acid hydrolysis is presented. The process of LC eluate deposition onto a MALDI plate along with practical considerations for achieving optimal performance of eluate deposition is described. Issues related to MALDI MS and MS/MS spectral acquisition are discussed. Database searching and manual inspection of MS/MS spectra of singly charged MALDI-produced peptide ions for positive protein identification are also addressed.

Triplex protein quantification based on stable isotope labeling by peptide dimethylation applied to cell and tissue lysates

Stable isotope labeling is at present one of the most powerful methods in quantitative proteomics. Stable isotope labeling has been performed at both the protein as well as the peptide level using either metabolic or chemical labeling. Here, we present a straightforward and cost-effective triplex quantification method that is based on stable isotope dimethyl labeling at the peptide level. Herein, all proteolytic peptides are chemically labeled at their alpha- and epsilon-amino groups. We use three different isotopomers of formaldehyde to enable the parallel analysis of three different samples. These labels provide a minimum of 4 Da mass difference between peaks in the generated peptide triplets. The method was evaluated based on the quantitative analysis of a cell lysate, using a typical "shotgun" proteomics experiment. While peptide complexity was increased by introducing three labels, still more than 1300 proteins could be identified using 60 microg of starting material, whereby more than 600 proteins could be quantified using at least four peptides per protein. The triplex labeling was further utilized to distinguish specific from aspecific cAMP binding proteins in a chemical proteomics experiment using immobilized cAMP. Thereby, differences in abundance ratio of more than two orders of magnitude could be quantified.

Reductive glutaraldehydation of amine groups for identification of protein N-termini

In the present work, reductive alkylation of proteins and peptides with glutaraldehyde (reductive glutaraldehydation) is reported. The reaction is highly efficient and forms piperidine at the N-terminus as well as the side chain of lysine residues. The complete modification of protein amines was achieved by reductive glutaraldehydation in solution or in the gel in less than 15 min. The glutaraldehyde-modified peptides display an enhanced intensity in mass spectra and show higher retention time in reversed phase chromatography in comparison to unmodified peptides. Fragmentation of glutaraldehyde-modified proteins and peptides generates a1 fragment ions with enhanced intensity in MS/MS spectra. Thus, a method based on reductive glutaraldehydation and LC-MS/MS analysis has been developed to determine the N-terminal residue of proteins with free N-termini.

Chemistry meets proteomics: the use of chemical tagging reactions for MS-based proteomics

As proteomics matures from a purely descriptive to a function-oriented discipline of the life sciences, there is strong demand for novel methodologies that increase the depth of information that can be obtained from proteomic studies. MS has long played a central role for protein identification and characterization, often in combination with dedicated chemical modification reactions. Today, chemistry is helping to advance the field of proteomics in numerous ways. In this review, we focus on those methodologies that have a significant impact for the large-scale study of proteins and peptides. This includes approaches that allow the introduction of affinity tags for the enrichment of subclasses of peptides or proteins and strategies for in vitro stable isotope labeling for quantification purposes, among others. Particular attention is given to the study of PTMs where recent advancements have been promising, but many interesting targets are not yet being addressed.

A study of reproducibility of guanidination-dimethylation labeling and liquid chromatography matrix-assisted laser desorption ionization mass spectrometry for relative proteome quantification

The combination of dimethylation after guanidination (2MEGA) isotope labeling with microbore liquid chromatography (LC)-matrix-assisted laser desorption ionization (MALDI) MS and MS/MS [C. Ji, N. Guo, L. Li, J. Proteome Res. 4 (2005) 2099] has been reported as a promising strategy for abundance ratio-dependent quantitative proteome analysis. A critical step in using this integrated strategy is to set up the abundance ratio threshold of peptide pairs, above which the peptide pairs are used for quantifying and identifying the protein that is considered to be differentially expressed between two different samples. The threshold is determined by technical variation (i.e., the overall abundance ratio variation caused by the experimental process including sample workup, MS analysis and data processing) as well as biological variation (i.e., the abundance ratio variation caused by the biological process including cell growth), which can be defined and assessed by a coefficient of variation (CV). We have designed experiments and measured three different levels of variations, starting with the same membrane protein preparation, the same batch of cells and three batches of cells from the same cell line grown under the same conditions, respectively. It is shown that technical variation from the experimental processes involved in 2MEGA labeling LC-MALDI MS has a CV of <15%. In addition, the measured biological variation from cell growth was much smaller than the measured technical variation. From the studies of the occurrence rate of outliers in the distribution of the abundance ratio data within a comparative dataset of peptide pairs, it is concluded that, to compare the proteome changes between two sets of cultured cells without the use of replicate experiments, a relative abundance ratio of greater than 2X or less than 0.5X (X is the average abundance ratio of the dataset) on peptide pairs can be used as a stringent threshold to quantify and identify differentially expressed proteins with high confidence.

LC-MALDI MS and MS/MS--an efficient tool in proteome analysis

Liquid chromatography-matrix-assisted laser desorption/ionization mass spectrometry represents a sensitive, hyphenated MS- and MS/MS-technique with a broad range of applications in all areas ofproteome analysis. Whereas a number of interface types have been developed for coupling MALDI MS and liquid chromatography, in this chapter selected on-line and off-line types and techniques will be discussed with respect to their individual properties and performance. The technique is especially attractive in off-line mode where LC-separation and MS analyses are decoupled and each step can be performed at its individual optimum. Different speed of chromatographic separation and achievement of S/N criteria in MS or MS/MS mode can be optimized independently by individual adjustment of specific operating parameters. This flexibility makes LC-MALDI MS attractive for the analysis of peptide mixtures from low to medium complexity. Using sequential MS analysis of parallel LC runs (multiplexing), even highly complex samples can be handled. Quantitation at the MS and MS/MS level can be accomplished by a variety of labeling techniques, where the predominant formation of singly charged ions in MALDI alleviates the assignment of isotopomers. After discussing the level of complementarity between LC-MALDI and LC-ESI MS, selected applications of LC-MALDI MS are presented. Examples of membrane protein analysis applying 1D SDS PAGE are discussed in detail as well as applications in protein interaction analysis. These application examples clearly show that in all respects LC-MALDI MS and MS/MS are flexible and sensitive techniques which can be adapted to a wide range of different workflows.

High-coverage quantitative proteomics using amine-specific isotopic labeling

Peptide dimethylation with isotopically coded formaldehydes was evaluated as a potential alternative to techniques such as the iTRAQ method for comparative proteomics. The isotopic labeling strategy and custom-designed protein quantitation software were tested using protein standards and then applied to measure proteins levels associated with Alzheimer's disease (AD). The method provided high accuracy (10% error), precision (14% RSD) and coverage (70%) when applied to the analysis of a standard solution of BSA by LC-MS/MS. The technique was then applied to measure protein abundance levels in brain tissue afflicted with AD relative to normal brain tissue. 2-D LC-MS analysis identified 548 unique proteins (p<0.05). Of these, 349 were quantified with two or more peptides that met the statistical criteria used in this study. Several classes of proteins exhibited significant changes in abundance. For example, elevated levels of antioxidant proteins and decreased levels of mitochondrial electron transport proteins were observed. The results demonstrate the utility of the labeling method for high-throughput quantitative analysis.

Dimethyl multiplexed labeling combined with microcolumn separation and MS analysis for time course study in proteomics

Stable-isotope labeling coupled with liquid-phase separation and MS analysis is a powerful technique for comparative proteomics. We developed a dimethyl labeling strategy (Anal. Chem. 2003, 75, 6843-6852 and J. Proteome Res. 2005, 4, 101-108) to label peptide N-terminus and epsilon-amino groups of Lys with water-soluble formaldehyde via reductive methylation, and an isotopic pair of formaldehyde is used for binary labeling on two sets of samples. In this study, this approach is extended to a four sample labeling by combining the binary isotopic reagents of formaldehyde (d0, d2) and the binary isotopic reducing reagents, sodium cyanoborohydride (d0, d3). To ensure sufficient mass difference, this multiplexed labeling is coupled with endoproteinase Lys-C instead of trypsin for digestion, resulting in at least two labeling sites with a mass difference of 4 Da for each pair of peptide digest. Moreover, multiplex dimethyl labeling was proved to have no significant isotopic effect during RP LC elution. This method was further applied for monitoring Lys-C digestion using hemoglobin as a model. Dimethyl labeled digests derived from seven time points (1-30 h) were grouped into two sets of sample mixtures, separated by nano-LC to reduce the complexity, and then analyzed by ESI-MS/MS. The temporal study reveals that Lys-C digestion was completed in 10-15 h for all detected peptides. The multiplex dimethyl method has not only provided a simultaneous detection mean for four sample sets but has also conserved all the advantages associated with the original binary method.

Fragmentation of peptides with N-terminal dimethylation and imine/methylol adduction at the tryptophan side-chain

The reaction between formaldehyde and the side-chain of tryptophan results in a methylol adduct. This methylol adduct formation also occurs during reductive methylation reactions. In the current study, we investigate the fragmentation pattern of peptides with N-terminal dimethylation and methylol adduction at the tryptophan side-chain. Once formed, the methylol group can easily undergo water loss to form an imine. The peptides with imine or methylol adduct on tryptophan exhibit similar MS/MS fragmentation patterns. We observed ions resulting from an intramolecular reaction between the dimethylamino group at the peptide N-terminus or the lysine side-chain and the imine group. This reaction reduces the imine to a methyl group. We also observed the loss of the imine adduct on tryptophan. This reaction is likely to occur through the reaction of an amino or hydroxyl group with the imine adduct followed by subsequent loss of methylenimine or formaldehyde.

An impulse-driven liquid-droplet deposition interface for combining LC with MALDI MS and MS/MS

A simple and robust impulse-driven droplet deposition system was developed for off-line liquid chromatography matrix-assisted laser desorption ionization mass spectrometry (LC-MALDI MS). The system uses a solenoid operated with a pulsed voltage power supply to generate impulses that dislodge the hanging droplets from the LC outlet directly to a MALDI plate via a momentum transfer process. There is no contact between the LC outlet and the collection surface. The system is compatible with solvents of varying polarity and viscosity, and accommodates the use of hydrophobic and hydrophilic MALDI matrices. MALDI spots are produced on-line with the separation, and do not require further processing before MS analysis. It is shown that high quality MALDI spectra from 5 fmol of pyro-Glu-fibrinopeptide deposition after LC separation could be obtained using the device, indicating that there was no sample loss in the interface. To demonstrate the analytical performance of the system as a proteome analysis tool, a range of BSA digest concentrations covering about 3 orders of magnitude, from 5 fmol to 1 pmol, were analyzed by LC-MALDI quadrupole time-of-flight MS, yielding 6 and 57% amino acid sequence coverage, respectively. In addition, a complex protein mixture of an E. coli cell extract was tryptically digested and analyzed by LC-MALDI MS, resulting in the detection of a total of 409 unique peptides from 100 fractions of 15-s intervals.