Cloud condensation nuclei activity of internally mixed particle populations at a remote marine free troposphere site in the North Atlantic Ocean

This study reports results from research conducted at the Observatory of Mount Pico (OMP), 2225 m above mean sea level on Pico Island in the Azores archipelago in June and July 2017. We investigated the chemical composition, mixing state, and cloud condensation nuclei (CCN) activities of long-range transported free tropospheric (FT) particles. FLEXible PARTicle Lagrangian particle dispersion model (FLEXPART) simulations reveal that most air masses that arrived at the OMP during the sampling period originated in North America and were highly aged (average plume age > 10 days). We probed size-resolved chemical composition, mixing state, and hygroscopicity parameter (κ) of individual particles using computer-controlled scanning electron microscopy with an energy-dispersive X-ray spectrometer (CCSEM-EDX). Based on the estimated individual particle mass from elemental composition, we calculated the mixing state index, χ. During our study, FT particle populations were internally mixed (χ of samples are between 53 % and 87 %), owing to the long atmospheric aging time. We used data from a miniature Cloud Condensation Nucleus Counter (miniCCNC) to derive the hygroscopicity parameter, κCCNC. Combining κCCNC and FLEXPART, we found that air masses recirculated above the North Atlantic Ocean with lower mean altitude had higher κCCNC due to the higher contribution of sea salt particles. We used CCSEM-EDX and phase state measurements to predict single-particle κ (κCCSEM-EDX) values, which overlap with the lower range of κCCNC measured below 0.15 % SS. Therefore, CCSEM-EDX measurements can be useful in predicting the lower bound of κ, which can be used in climate models to predict CCN activities, especially in remote locations where online CCN measurements are unavailable.

Unified theoretical framework for black carbon mixing state allows greater accuracy of climate effect estimation

Black carbon (BC) plays an important role in the climate system because of its strong warming effect, yet the magnitude of this effect is highly uncertain owing to the complex mixing state of aerosols. Here we build a unified theoretical framework to describe BC's mixing states, linking dynamic processes to BC coating thickness distribution, and show its self-similarity for sites in diverse environments. The size distribution of BC-containing particles is found to follow a universal law and is independent of BC core size. A new mixing state module is established based on this finding and successfully applied in global and regional models, which increases the accuracy of aerosol climate effect estimations. Our theoretical framework links observations with model simulations in both mixing state description and light absorption quantification.

Estimates of Future New Particle Formation under Different Emission Scenarios in Beijing

New particle formation (NPF) is a leading source of particulate matter by number and a contributor to particle mass during haze events. Reductions in emissions of air pollutants, many of which are NPF precursors, are expected in the move toward carbon neutrality or net-zero. Expected changes to pollutant emissions are used to investigate future changes to NPF processes, in comparison to a simulation of current conditions. The projected changes to SO₂ emissions are key in changing future NPF number, with different scenarios producing either a doubling or near total reduction in sulfuric acid-amine particle formation rates. Particle growth rates are projected to change little in all but the strictest emission control scenarios. These changes will reduce the particle mass arising by NPF substantially, thus showing a further cobenefit of net-zero policies. Major uncertainties remain in future NPF including the volatility of oxygenated organic molecules resulting from changes to NO_x and amine emissions.

Vapor Condensation and Coating Evaporation Are Both Responsible for Soot Aggregate Restructuring

Fresh soot is made of fractal aggregates, which often appear collapsed in atmospheric samples. A body of work has concluded that the collapse is caused by liquid shells when they form by vapor condensation around soot aggregates. However, some recent studies argue that soot remains fractal even when engulfed by the shells, collapsing only when the shells evaporate. To reconcile this disagreement, we investigated soot restructuring under conditions ranging from capillary condensation to full encapsulation, also including condensate evaporation. In these experiments, airborne fractal aggregates were exposed to vapors of wetting liquids, and particle size was measured before and after coating loss, allowing us to isolate the contribution from condensation toward restructuring. We show the existence of three distinct regions along the path connecting the initial fractal and final collapsed aggregates, where minor restructuring occurs already at zero vapor supersaturation due to capillary condensation. Increasing supersaturation increases the amount of condensate, producing a more notable aggregate shrinkage. At even higher supersaturations, the aggregates become encapsulated, and subsequent condensate evaporation leaves behind fully compacted aggregates. Hence, for wetting liquids, minor restructuring begins already during capillary condensation and significant restructuring occurs as the coating volume increases. However, at this time, we cannot precisely quantify the contribution of condensate evaporation to the full aggregate compaction.

Biomass burning aerosols in most climate models are too absorbing

Uncertainty in the representation of biomass burning (BB) aerosol composition and optical properties in climate models contributes to a range in modeled aerosol effects on incoming solar radiation. Depending on the model, the top-of-the-atmosphere BB aerosol effect can range from cooling to warming. By relating aerosol absorption relative to extinction and carbonaceous aerosol composition from 12 observational datasets to nine state-of-the-art Earth system models/chemical transport models, we identify varying degrees of overestimation in BB aerosol absorptivity by these models. Modifications to BB aerosol refractive index, size, and mixing state improve the Community Atmosphere Model version 5 (CAM5) agreement with observations, leading to a global change in BB direct radiative effect of -0.07 W m^-2, and regional changes of -2 W m^-2 (Africa) and -0.5 W m^-2 (South America/Temperate). Our findings suggest that current modeled BB contributes less to warming than previously thought, largely due to treatments of aerosol mixing state.

Black Carbon as a Source of Trace Elements and Nutrients in Ice Sheet of King George Island, Antarctica

Enormous deglaciation in the polar and mountainous regions of the Earth is associated not only with large-scale climatic changes but also with the global transfer of black carbon (BC) microparticles, which accumulate on the surface of glaciers and lead to changes in albedo and the rate of degradation of ice. BC is the product of an incomplete combustion of fossil fuels, volcanic eruptions, and wildfires. The accumulation of organogenic microparticles leads to the formation of cryoconites, which are dust made of a combination of small rock particles and the result of anthropogenic activities (fossil fuel combustion) that play a special role in deglaciation. Here, we describe the content of trace metals and nutrients in accumulation of the BC from glaciers of Fildes Peninsula, King George Island, Western Antarctica. The analysis of trace metals concentrations showed that most of the studied elements (Cr, Pb, Zn, Ni) have a volcanic origin; at the same time, Cd and Cu have been accumulated as a result of anthropogenic activity. The content of nutrients in BC are most similar with Technosols, which forms near the scientific station at King George Island. The particles of BC can be translocated into organisms, which could pose a significant risk for living organisms and humans.

A Review of the Representation of Aerosol Mixing State in Atmospheric Models

Aerosol mixing state significantly affects concentrations of cloud condensation nuclei (CCN), wet removal rates, thermodynamic properties, heterogeneous chemistry, and aerosol optical properties, with implications for human health and climate. Over the last two decades, significant research effort has gone into finding computationally-efficient methods for representing the most important aspects of aerosol mixing state in air pollution, weather prediction, and climate models. In this review, we summarize the interactions between mixing-state and aerosol hygroscopicity, optical properties, equilibrium thermodynamics and heterogeneous chemistry. We focus on the effects of simplified assumptions of aerosol mixing state on CCN concentrations, wet deposition, and aerosol absorption. We also summarize previous approaches for representing aerosol mixing state in atmospheric models, and we make recommendations regarding the representation of aerosol mixing state in future modelling studies.

Black carbon radiative effects highly sensitive to emitted particle size when resolving mixing-state diversity

Post-industrial increases in atmospheric black carbon (BC) have a large but uncertain warming contribution to Earth's climate. Particle size and mixing state determine the solar absorption efficiency of BC and also strongly influence how effectively BC is removed, but they have large uncertainties. Here we use a multiple-mixing-state global aerosol microphysics model and show that the sensitivity (range) of present-day BC direct radiative effect, due to current uncertainties in emission size distributions, is amplified 5-7 times (0.18-0.42 W m-2) when the diversity in BC mixing state is sufficiently resolved. This amplification is caused by the lifetime, core absorption, and absorption enhancement effects of BC, whose variability is underestimated by 45-70% in a single-mixing-state model representation. We demonstrate that reducing uncertainties in emission size distributions and how they change in the future, while also resolving modeled BC mixing state diversity, is now essential when evaluating BC radiative effects and the effectiveness of BC mitigation on future temperature changes.

Spatially refined aerosol direct radiative forcing efficiencies

Global aerosol direct radiative forcing (DRF) is an important metric for assessing potential climate impacts of future emissions changes. However, the radiative consequences of emissions perturbations are not readily quantified nor well understood at the level of detail necessary to assess realistic policy options. To address this challenge, here we show how adjoint model sensitivities can be used to provide highly spatially resolved estimates of the DRF from emissions of black carbon (BC), primary organic carbon (OC), sulfur dioxide (SO(2)), and ammonia (NH(3)), using the example of emissions from each sector and country following multiple Representative Concentration Pathway (RCPs). The radiative forcing efficiencies of many individual emissions are found to differ considerably from regional or sectoral averages for NH(3), SO(2) from the power sector, and BC from domestic, industrial, transportation and biomass burning sources. Consequently, the amount of emissions controls required to attain a specific DRF varies at intracontinental scales by up to a factor of 4. These results thus demonstrate both a need and means for incorporating spatially refined aerosol DRF into analysis of future emissions scenario and design of air quality and climate change mitigation policies.

Vertical profiles of aerosol absorption coefficient from micro-Aethalometer data and Mie calculation over Milan

Vertical profiles of aerosol number-size distribution and black carbon (BC) concentration were measured between ground-level and 500m AGL over Milan. A tethered balloon was fitted with an instrumentation package consisting of the newly-developed micro-Aethalometer (microAeth® Model AE51, Magee Scientific, USA), an optical particle counter, and a portable meteorological station. At the same time, PM(2.5) samples were collected both at ground-level and at a high altitude sampling site, enabling particle chemical composition to be determined. Vertical profiles and PM(2.5) data were collected both within and above the mixing layer. Absorption coefficient (b(abs)) profiles were calculated from the Aethalometer data: in order to do so, an optical enhancement factor (C), accounting for multiple light-scattering within the filter of the new microAeth® Model AE51, was determined for the first time. The value of this parameter C (2.05±0.03 at λ=880nm) was calculated by comparing the Aethalometer attenuation coefficient and aerosol optical properties determined from OPC data along vertical profiles. Mie calculations were applied to the OPC number-size distribution data, and the aerosol refractive index was calculated using the effective medium approximation applied to aerosol chemical composition. The results compare well with AERONET data. The BC and b(abs) profiles showed a sharp decrease at the mixing height (MH), and fairly constant values of b(abs) and BC were found above the MH, representing 17±2% of those values measured within the mixing layer. The BC fraction of aerosol volume was found to be lower above the MH: 48±8% of the corresponding ground-level values. A statistical mean profile was calculated, both for BC and b(abs), to better describe their behaviour; the model enabled us to compute their average behaviour as a function of height, thus laying the foundations for valid parametrizations of vertical profile data which can be useful in both remote sensing and climatic studies.

The Uptake of SO2 on α-Fe2O3 and Mineral Dust Surfaces in the Temperature Range 250 K to 600 K

The uptake of SO2 on α-Fe2O3 and Saharan dust has been studied in the temperature range 250 K to 600 K using a Knudsen cell reactor. SO2 adsorbs readily and irreversibly on both mineral oxides with a mean initial uptake coefficient of γ ini = (5.9±0.3) · 10−2 on dry surfaces, independent of the surface temperature. In the presence of adsorbed water the initial uptake coefficients at T = 300 K are slightly higher with values of γ ini = (8.4±0.2) · 10−2 for Fe2O3 and γ ini = (7.3±0.4) · 10−2 for mineral dust. The uptake of SO2 is time-dependent and influenced by diffusion into the bulk of the sample at longer timescales. The adsorption capacity has been determined to be (3.0±0.4) · 1018 molecules g−1 for Fe2O3 and (2.6±1) · 1019 molecules g−1 for mineral dust. Sulphite has been identified as the primary reaction product on both surfaces which is readily oxidized to sulphate under atmospheric conditions. Oxidation of sulphite to sulphate only takes place at elevated temperature. From these results a mechanism for the uptake of SO2 onto mineral oxides is inferred, which has been used to compare the experimental concentration-time-profiles with simulated ones.

Measurements of black and organic carbon emission factors for household coal combustion in China: implication for emission reduction

Household coal combustion is considered as the greatest emission source for black carbon (BC) and an important source for organic carbon (OC) in China. However, measurements on BC and OC emission factors (EF(BC) and EF(OC)) are still scarce, which result in large uncertainties in emission estimates. In this study, a detailed data set of EF(BC) and EF(OC) for household coal burning was presented on the basis of 38 coal/stove combination experiments. These experiments included 13 coals with a wide coverage of geological maturity which were tested in honeycomb-coal-briquette and raw-coal-chunk forms in three typical coal stoves. Averaged values of EF(BC) are 0.004 and 0.007 g/kg for anthracite in briquette and chunk forms and 0.09 and 3.05 g/kg for bituminous coal, respectively; EF(OC) are 0.06 and 0.10 g/kg for anthracite and 3.74 and 5.50 g/kg for bituminous coal in both forms, respectively. Coal maturity was found to be the most important influencing factor relative to coal's burning forms and the stove's burning efficiency, and when medium-volatile bituminous coals (MVB) are excluded from use, averaged EF(BC) and EF(OC) for bituminous coal decrease by 50% and 30%, respectively. According to these EFs, China's BC and OC emissions from the household sector in 2000 were 94 and 244 gigagrams (Gg), respectively. Compared with previous BC emission estimates for this sector (e.g., 465 Gg by Ohara et al., Atmos. Chem. Phys. 2007, 7, 4419-4444), a dramatic decrease was observed and was mainly attributed to the update of EFs. As suggested by this study, if MVB is prohibited as household fuel together with further promotion of briquettes, BC and OC emissions in this sector will be reduced by 80% and 34%, respectively, and then carbonaceous emissions can be controlled to a large extent in China.

Chemistry and Microphysics of Atmospheric Aerosol Surfaces: Laboratory Techniques and Applications

A number of current techniques are presented by which the chemistry of interaction of selected gas phase species with atmospheric surfaces as well as the microphysical behaviour of such surfaces can be investigated. The techniques discussed include (i) the coated wall flow tube reactor, (ii) the Knudsen-cell / DRIFT spectroscopy, (iii) the surface aerosol microscopy and (iv) the molecular beam scattering technique. In each of these methods specific and robust information is deduced on the kinetics and thermodynamics of gas adsorption and reaction on surfaces. Specific examples include the adsorption of acetone on ice surfaces, the adsorption and reaction of SO2 on iron oxides, the hygroscopic and phase behaviour of binary and ternary salt solution droplets (ammonium sulphate and ammonium sulphate / dicarboxylic acids solutions) as well as on the dynamics of inelastic collisions of noble gases on super-cooled sulphuric acid surfaces. In addition we also show how quantum chemistry can be utilized to assist in interpreting absorption energies on structurally different ice surfaces. Whilst each example represents different aspects of heterogenous atmospheric interactions, they jointly represent significant progress in laboratory investigations of multi-phase atmospheric chemistry with substantial potential for application to other systems and/or problems.

Analysis of atmospheric aerosols

Aerosols represent an important component of the Earth's atmosphere. Because aerosols are composed of solid and liquid particles of varying chemical complexity, size, and phase, large challenges exist in understanding how they impact climate, health, and the chemistry of the atmosphere. Only through the integration of field, laboratory, and modeling analysis can we begin to unravel the roles atmospheric aerosols play in these global processes. In this article, we provide a brief review of the current state of the science in the analysis of atmospheric aerosols and some important challenges that need to be overcome before they can become fully integrated. It is clear that only when these areas are effectively bridged can we fully understand the impact that atmospheric aerosols have on our environment and the Earth's system at the level of scientific certainty necessary to design and implement sound environmental policies.

Heterogeneous Chemistry of Organic Acids on Soot Surfaces

We have investigated the heterogeneous interaction between a number of carboxylic acids and soot generated from different fuel sources and formation mechanisms. A low-pressure fast flow reactor in conjunction with ion drift-chemical ionization mass spectrometry detection was employed to study uptake of monocarboxylic (benzoic, oleic, and steric) and dicarboxylic (glutaric, maleic, oxalic, and phthalic) acids on deposited soot surfaces formed by combustion of methane, propane, and kerosene. Most acids exhibited irreversible uptake on the soot surfaces and the uptake coefficient was measured in the range of 9 x 10(-4) to 1 x 10(-1) estimated based on the geometric surface areas. Brunauer, Emmett, and Teller surface areas of the deposited soot surfaces were measured and the soot bulk and surface chemical compositions were evaluated with Fourier transform infrared spectroscopy and attenuated total reflection spectroscopy. Plausible uptake mechanisms were discussed on the basis of the measured soot physiochemical properties by comparing the mono and dicarboxylic acids.