Dietary specializations and diversity in feeding ecology of the earliest stem mammals

Variations in dietary patterns of living sloths revealed by finite element analysis of jaws

Although extinct sloths exhibited a wide range of dietary habits, modes of locomotion, and occupied various niches across the Americas, modern sloths are considered quite similar in their habits. The dietary habits of living sloths can be directly observed in the wild, and understanding the mechanical behavior of their jaws during chewing through finite element analysis (FEA) provides a valuable validation tool for comparative analysis with their extinct counterparts. In this study, we used FEA to simulate the mechanical behavior of sloth mandibles under lateral mastication loads, using it as a proxy for oral processing. Our research focused on the six extant sloth species to better understand their diets and validate the use of FEA for studying their extinct relatives. We found that all living sloths have the predominancy of low-stress areas in their mandibles but with significant differences. Choloepus didactylus had larger high-stress areas, which could be linked to a reduced need for processing tougher foods as an opportunistic generalist. Bradypus variegatus and Choloepus hoffmanni are shown to be similar, displaying large low-stress areas, indicating greater oral processing capacity in a seasonal and more competitive environment. Bradypus torquatus, Bradypus pygmaeus, and Bradypus tridactylus exhibited intermediary processing patterns, which can be linked to a stable food supply in more stable environments and a reduced requirement for extensive oral processing capacity. This study sheds light on extant sloths' dietary adaptations and has implications for understanding the ecological roles and evolutionary history of their extinct counterparts.

A new biomechanical model of the mammal jaw based on load path analysis

The primary function of the tetrapod jaw is to transmit jaw muscle forces to bite points. The routes of force transfer in the jaw have never been studied but can be quantified using load paths - the shortest, stiffest routes from regions of force application to support constraints. Here, we use load path analysis to map force transfer from muscle attachments to bite point and jaw joint, and to evaluate how different configurations of trabecular and cortical bone affect load paths. We created three models of the mandible of the Virginia opossum, Didelphis virginiana, each with a cortical bone shell, but with different material properties for the internal spaces: (1) a cortical-trabecular model, in which the interior space is modeled with bulk properties of trabecular bone; (2) a cortical-hollow model, in which trabeculae and mandibular canal are modeled as hollow; and (3) a solid-cortical model, in which the interior is modeled as cortical bone. The models were compared with published in vivo bite force and bone strain data, and the load paths calculated for each model. The trabecular model, which is preferred because it most closely approximates the actual morphology, was best validated by in vivo data. In all three models, the load path was confined to cortical bone, although its route within the cortex varied depending on the material properties of the inner model. Our analysis shows that most of the force is transferred through the cortical, rather than trabecular bone, and highlights the potential of load path analysis for understanding form-function relationships in the skeleton.

Historical Field Records Reveal Habitat as an Ecological Correlate of Locomotor Phenotypic Diversity in the Radiation of Neotropical Geophagini Fishes

AbstractPhenotypic macroevolutionary studies provide insight into how ecological processes shape biodiversity. However, the complexity of phenotype-ecology relationships underscores the importance of also validating phenotype-based ecological inference with direct evidence of resource use. Unfortunately, macroevolutionary-scale ecological studies are often hindered by the challenges of acquiring taxonomically and spatially representative ecological data for large and widely distributed clades. The South American cichlid fish tribe Geophagini represents a continentally distributed radiation whose early locomotor morphological divergence suggests habitat as one ecological correlate of diversification, but an association between locomotor traits and habitat preference has not been corroborated. Field notes accumulated over decades of collecting across South America provide firsthand environmental records that can be mined for habitat data in support of macroevolutionary ecological research. In this study, we applied a newly developed method to transform descriptive field note information into quantitative habitat data and used it to assess habitat preference and its relationship to locomotor morphology in Geophagini. Field note-derived data shed light on geophagine habitat use patterns and reinforced habitat as an ecological correlate of locomotor morphological diversity. Our work emphasizes the rich data potential of museum collections, including often-overlooked material such as field notes, for evolutionary and ecological research.

Evolutionary lability of food caching behaviour in mammals

Food hoarding provides animals access to resources during periods of scarcity. Studies on mammalian caching indicate associations with brain size, seasonality and diet but are biased to a subset of rodents. Whether the behaviour is generalizable at other taxonomic scales and/or is influenced by other ecological factors is less understood. Population density may influence food caching due to food competition or pilferage, but this remains untested in a comparative framework. Using phylogenetic analyses, we assessed the role of morphology (body and brain size), climate, diet breadth and population density on food caching behaviour evolution at multiple taxonomic scales. We also used a long-term dataset on caching behaviour of red squirrels (Tamiasciurus fremonti) to test key factors (climate and population density) on hoarding intensity. Consistent with previous smaller scale studies, we found the mammalian ancestral state for food caching was larderhoarding, and scatterhoarding was derived. Caching strategy was strongly associated with brain size, population density and climate. Mammals with larger brains and hippocampal volumes were more likely to scatterhoard, and species living at higher population densities and in colder climates were more likely to larderhoard. Finer-scale analyses within families, sub-families and tribes indicated that the behaviour is evolutionary labile. Brain size in family Sciuridae and tribe Marmotini was larger in scatterhoarders, but not in other tribes. Scatterhoarding in tribe Marmotini was more likely in species with lower population densities while scatterhoarding in tribe Sciurini was associated with warmer climates. Red squirrel larderhoarding intensity was positively related to population density but not climate, implicating food competition or pilferage as an important mechanism mediating caching behaviour. Our results are consistent with previous smaller-scale studies on food caching and indicate the evolutionary patterns of mammalian food caching are broadly generalizable. Given the lability of caching behaviour as evidenced by the variability of our results at finer phylogenetic scales, comparative analyses must consider taxonomic scale. Applying our results to conservation could prove useful as changes in population density or climate may select for different food caching strategies and thus can inform management of threatened and endangered species and their habitats.

Evolution of olfactory receptor superfamily in bats based on high throughput molecular modelling

The origin of flight and laryngeal echolocation in bats is likely to have been accompanied by evolutionary changes in other aspects of their sensory biology. Of all sensory modalities in bats, olfaction is perhaps the least well understood. Olfactory receptors (ORs) function in recognizing odour molecules, with crucial roles in evaluating food, as well as in processing social information. Here we compare OR repertoire sizes across taxa and apply a new pipeline that integrates comparative genome data with protein structure modelling and then we employ molecular docking techniques with small molecules to analyse OR functionality based on binding energies. Our results suggest a sharp contraction in odorant recognition of the functional OR repertoire during the origin of bats, consistent with a reduced dependence on olfaction. We also compared bat lineages with contrasting different ecological characteristics and found evidence of differences in OR gene expansion and contraction, and in the composition of ORs with different tuning breadths. The strongest binding energies of ORs in non-echolocating fruit-eating bats were seen to correspond to ester odorants, although we did not detect a quantitative advantage of functional OR repertoires in these bats compared with echolocating insectivorous species. Overall, our findings based on molecular modelling and computational docking suggest that bats have undergone olfactory evolution linked to dietary adaptation. Our results from extant and ancestral bats help to lay the groundwork for targeted experimental functional tests in the future.

The Late Cretaceous eutherian Zalambdalestes reveals unique axis and complex evolution of the mammalian neck

The typical mammalian neck consisting of seven cervical vertebrae (C1-C7) was established by the Late Permian in the cynodont forerunners of modern mammals. This structure is precisely adapted to facilitate movements of the head during feeding, locomotion, predator evasion, and social interactions. Eutheria, the clade including crown placentals, has a fossil record extending back more than 125 million years revealing significant morphological diversification in the Mesozoic. Yet very little is known concerning the early evolution of eutherian cervical morphology and its functional adaptations. A specimen of Zalambdalestes lechei from the Late Cretaceous of Mongolia boasts exceptional preservation of an almost complete series of cervical vertebrae (C2-C7) revealing a highly modified axis (C2). The significance of this cervical morphology is explored utilizing an integrated approach combining comparative anatomical examination across mammals, muscle reconstruction, geometric morphometrics and virtual range of motion analysis. We compared the shape of the axis in Zalambdalestes to a dataset of 88 mammalian species (monotremes, marsupials, and placentals) using three-dimensional landmark analysis. The results indicate that the unique axis morphology of Zalambdalestes has no close analog among living mammals. Virtual range of motion analysis of the neck strongly implies Zalambdalestes was capable of exerting very forceful head movements and had a high degree of ventral flexion for an animal its size. These findings reveal unexpected complexity in the early evolution of the eutherian cervical morphology and suggest a feeding behavior similar to insectivores specialized in vermivory and defensive behaviors in Zalambdalestes akin to modern spiniferous mammals.

Growing sabers: Mandibular shape and biomechanical performance trajectories during the ontogeny of Smilodon fatalis

The evolution of organisms can be studied through the lens of developmental systems, as the timing of development of morphological features is an important aspect to consider when studying a phenotype. Such data can be challenging to obtain in fossil amniotes owing to the scarcity of their fossil record. However, the numerous remains of Rancho La Brea allow a detailed study of the postnatal changes in an extinct sabertoothed felid: Smilodon fatalis. Despite numerous previous studies on the ontogeny of Smilodon, an important question remained open: how did the cubs of Smilodon acquire and process food? By applying 3D geometric morphometrics and finite element analyses to 49 mandibles at various developmental stages (22 of S. fatalis, 23 of Panthera leo, and 4 of early diverging felids), we assess the changes in mandibular shape and performance during growth. Both lions and sabertooths exhibit a shift in mandibular shape, aligning with eruption of the lower carnassial. This marks the end of weaning in lions and suggests a prolonged weaning period in S. fatalis owing to its delayed eruption sequence. We also highlight distinct ontogenetic trajectories, with S. fatalis undergoing more postnatal mandibular shape changes. Finally, although S. fatalis appears more efficient than P. leo at performing an anchor bite, this efficiency is acquired through ontogeny and at a quite late age. The delayed shape change compared with P. leo and the low biting efficiency during the growth in Smilodon could indicate an extended duration of the parental care compared with P. leo.

Derived faunivores are the forerunners of major synapsid radiations

Evolutionary radiations generate most of Earth's biodiversity, but are there common ecomorphological traits among the progenitors of radiations? In Synapsida (the mammalian total group), 'small-bodied faunivore' has been hypothesized as the ancestral state of most major radiating clades, but this has not been quantitatively assessed across multiple radiations. To examine macroevolutionary patterns in a phylogenetic context, we generated a time-calibrated metaphylogeny ('metatree') comprising 1,888 synapsid species from the Carboniferous through the Eocene (305-34 Ma) based on 269 published character matrices. We used comparative methods to investigate body size and dietary evolution during successive synapsid radiations. Faunivory is the ancestral dietary regime of each major synapsid radiation, but relatively small body size is only established as the common ancestral state of radiations near the origin of Mammaliaformes in the Late Triassic. The faunivorous ancestors of synapsid radiations typically have numerous novel characters compared with their contemporaries, and these derived traits may have helped them to survive faunal turnover events and subsequently radiate.

Mechanical properties of the California sea lion (Zalophus californianus) and northern elephant seal (Mirounga angustirostris) lower jaws explain trophic plasticity

The fossil record of pinnipeds documents a suite of morphological changes that facilitate their ecological transition from a terrestrial to an aquatic lifestyle. Among these is the loss of the tribosphenic molar and the behavior typically associated with it in mammals: mastication. Instead, modern pinnipeds exhibit a broad range of feeding strategies that facilitate their distinct aquatic ecologies. Here, we examine the feeding morphology of two species of pinnipeds with disparate feeding ecologies: Zalophus californianus, a specialized raptorial biter, and Mirounga angustirostris, a suction specialist. Specifically, we test whether the morphology of the lower jaws facilitates trophic plasticity in feeding for either of these species. We used finite element analysis (FEA) to simulate the stresses during the opening and closing of the lower jaws in these species to explore the mechanical limits of their feeding ecology. Our simulations demonstrate that both jaws are highly resistant to the tensile stresses experienced during feeding. The lower jaws of Z. californianus experienced the maximum stress at the articular condyle and the base of the coronoid process. The lower jaws of M. angustirostris experienced the maximum stress at the angular process and were more evenly distributed throughout the body of the mandible. Surprisingly, the lower jaws of M. angustirostris were even more resistant to the stresses experienced during feeding than those of Z. californianus. Thus, we conclude that the superlative trophic plasticity of Z. californianus is driven by other factors unrelated to the mandible's tensile resistance to stress during feeding.

Mandibular characteristics of early Glires (Mammalia) reveal mixed rodent and lagomorph morphotypes

Glires (rodents, lagomorphs and their fossil kin) is the most speciose and arguably most diversified clade of living placentals. Different lineages within the Glires evolved basically opposite chewing movements: a mostly transversal power stroke in lagomorphs, and a mostly proal power stroke in rodents, but the ancestral condition for Glires is still unclear. To address this knowledge gap, we studied the mandibles of Chinese Palaeocene Glires representing the duplicidentate (lagomorph-like; Mimotona) and simplicidentate (rodent-like; Eomylus and Heomys) lineages. To assess the mechanical resistance of mandibles to bending and torsion, we calculated the section modulus. The dentaries differ greatly in morphology and the region where the maximum grinding force was likely applied. The early Palaeocene Mimotona lii and the middle Palaeocene Mimotona robusta and Heomys orientalis all show a pattern of increasing strength moving posteriorly along the mandible, similar to sciurids and the mountain beaver. By contrast, the late Palaeocene Eomylus sp. mandible was strongest in the m1 region, a pattern seen in lagomorphs and the stem placental Zofialestes. Our results indicate the early diversification of mandible structure of Glires, demonstrate a mixture of duplicidentate and simplicidentate characters among the basal Glires and suggest an early occurrence of a lagomorph-like morphotype. This article is part of the theme issue 'The mammalian skull: development, structure and function'.

Functional reorganisation of the cranial skeleton during the cynodont-mammaliaform transition

Skeletal simplification occurred in multiple vertebrate clades over the last 500 million years, including the evolution from premammalian cynodonts to mammals. This transition is characterised by the loss and reduction of cranial bones, the emergence of a novel jaw joint, and the rearrangement of the jaw musculature. These modifications have long been hypothesised to increase skull strength and efficiency during feeding. Here, we combine digital reconstruction and biomechanical modelling to show that there is no evidence for an increase in cranial strength and biomechanical performance. Our analyses demonstrate the selective functional reorganisation of the cranial skeleton, leading to reduced stresses in the braincase and the skull roof but increased stresses in the zygomatic region through this transition. This cranial functional reorganisation, reduction in mechanical advantage, and overall miniaturisation in body size are linked with a dietary specialisation to insectivory, permitting the subsequent morphological and ecological diversification of the mammalian lineage.

Evolution and development of the mammalian jaw joint: Making a novel structure

A jaw joint between the squamosal and dentary is a defining feature of mammals and is referred to as the temporomandibular joint (TMJ) in humans. Driven by changes in dentition and jaw musculature, this new joint evolved early in the mammalian ancestral lineage and permitted the transference of the ancestral jaw joint into the middle ear. The fossil record demonstrates the steps in the cynodont lineage that led to the acquisition of the TMJ, including the expansion of the dentary bone, formation of the coronoid process, and initial contact between the dentary and squamosal. From a developmental perspective, the components of the TMJ form through tissue interactions of muscle and skeletal elements, as well as through interaction between the jaw and the cranial base, with the signals involved in these interactions being both biomechanical and biochemical. In this review, we discuss the development of the TMJ in an evolutionary context. We describe the evolution of the TMJ in the fossil record and the development of the TMJ in embryonic development. We address the formation of key elements of the TMJ and how knowledge from developmental biology can inform our understanding of TMJ evolution.

Many-to-one function of cat-like mandibles highlights a continuum of sabre-tooth adaptations

Cat-like carnivorans are a textbook example of convergent evolution, with distinct morphological differences between taxa with short or elongated upper canines, the latter often being interpreted as an adaptation to bite at large angles and subdue large prey. This interpretation of the sabre-tooth condition is reinforced by a reduced taxonomic sampling in some studies, often focusing on highly derived taxa or using simplified morphological models. Moreover, most biomechanical analyses focus on biting scenarios at small gapes, ideal for modern carnivora but ill-suited to test for subduction of large prey by sabre-toothed taxa. In this contribution, we present the largest three-dimensional collection-based muscle-induced biting simulations on cat-like carnivorans by running a total of 1074 analyses on 17 different taxa at three different biting angles (30°, 60° and 90°) including both morphologies. While our results show a clear adaptation of extreme sabre-toothed taxa to bite at larger angles in terms of stress distribution, other performance variables display surprising similarities between all forms at the different angles tested, highlighting a continuous rather than bipolar spectrum of hunting methods in cat-like carnivorans and demonstrating a wide functional disparity and nuances of the sabre-tooth condition that cannot simply be characterized by specialized feeding biomechanics.

The dental microwear texture of wild boars from Japan reflects inter- and intra-populational feeding preferences

Dental microwear texture analysis (DMTA) is rapidly expanding for the dietary estimation of extinct animals. There has been an extensive accumulation of microwear texture data from herbivorous mammals, especially for ruminant artiodactyls, but suids are still underrepresented. Microwear varies depending on the diet, and suids are naturally more flexible than other artiodactyls. Thus, their microwear is prone to greater variability. In this study, we examine the tooth microwear texture of wild boars from Toyama Prefecture, Japan, for which detailed ecological and dietary information by stomach content analysis is available. We first investigated 205 individuals of wild-shot Toyama boars with known sex, age class, localities (the eastern high latitude region vs. the western low latitude region), and season of collection. The tooth surfaces of boarlets were rougher than those of juvenile and adult animals. The decrease in surface roughness with age implied that the frequency of tooth-tooth contact, which seemed to result in cracking of enamels and thus rough surfaces, decreased after the boars started feeding on solid foods (food-tooth contact), with progressive involvement of rooting behavior in mature adults. We further found that surface roughness showed significant differences between localities, with the western Toyama boars having flatter surfaces, possibly because they were involved in more rooting and feeding on soil-contaminated rhizomes than the eastern ones, as implied by the available stomach content data. The frequency of rooting was also evident in the broader comparison among Japanese boar populations with different habitat environments. The mainland boars inhabiting deciduous broad-leaved forests had a flatter and less rough tooth surfaces than those in the subtropical evergreen broad-leaved forests of the southern islands. This corresponds to the fact that above-ground dietary resources were more abundant in the habitat of the southern island boars, where crops like succulent vegetables and fruits, as well as naturally fallen acorns, were abundant, whereas underground plant parts were the dominant diet component for the mainland boars. This study proved that DMTA can identify the difference in foraging modes in suids and make it possible to estimate the frequency of rooting, which is informative for inferring breeding methods of boars/pigs from archaeological sites.

Experimental approaches to assess the effect of composition of abrasives in the cause of dental microwear

Dental microwear is used to investigate feeding ecology. Animals ingest geological material in addition to food. The full effect of geological abrasives on tooth wear is unknown. To evaluate mineralogical abrasives as tooth wear agents, rats were fed food manufactured with quartz silt, diatomaceous earth, and calcium carbonate. Rats were assigned to treatments and fed for 15 days. Molars were scanned with a Sensofar Plu Neox confocal microscope and evaluated using ISO-25178-2 parameters and traditional microwear variables using light microscopy. Using a pellet-diet as the control, all treatments had influence on microwear and discriminant function analyses indicated that unique surface textures had been produced. ISO variables with high discriminatory values were correlated to scratch and pit frequencies, but more ISO parameters identified changes associated with numbers of scratches than changes associated with pits. The microwear changes associated with the abrasive inclusions were co-dependent on the type of diet that the abrasives had been added to. The abrasives had less effect with pellets but produced more modified and more differentiated microwear when added to the transgenic dough. Although abrasives produce distinctive surface textures, some knowledge of the properties of food with the abrasives is needed to identify the abrasive agent.

Puncture performance tests reveal distinct feeding modes in pinniped teeth

Marine mammals underwent a dramatic series of morphological transformations throughout their evolutionary history that facilitated their ecological transition to life in the water. Pinnipeds are a diverse clade of marine mammals that evolved from terrestrial carnivorans in the Oligocene (∼27 Ma). However, pinnipeds have secondarily lost the dental innovations emblematic of mammalian and carnivoran feeding, such as a talonid basin or shearing carnassials. Modern pinnipeds do not masticate their prey, but can reduce prey size through chopping behavior. Typically, small prey are swallowed whole. Nevertheless, pinnipeds display a wide breadth of morphology of the post-canine teeth. We investigated the relationship between dental morphologies and pinniped feeding by measuring the puncture performance of the cheek-teeth of seven extant pinniped genera. Puncture performance was measured as the maximum force and the maximum energy required to puncture a standardized prey item (Loligo sp). We report signficant differences in the puncture performance values across the seven genera, and identify three distinct categories based on cheek-teeth morphology and puncture performance: effective, ineffective, and moderate puncturers. In addition, we measured the overall complexity of the tooth row using two different metrics, Orientation Patch Count Rotated (OPCR) and Relif Index (RFI). Neither metric of complexity predicted puncture performance. Finally, we discuss these results in the broader context of known pinniped feeding strategies and lay the groundwork for subsequent efforts to explore the ecological variation of specific dental morphologies.

New tools suggest a middle Jurassic origin for mammalian endothermy: Advances in state-of-the-art techniques uncover new insights on the evolutionary patterns of mammalian endothermy through time: Advances in state-of-the-art techniques uncover new insights on the evolutionary patterns of mammalian endothermy through time

We suggest that mammalian endothermy was established amongst Middle Jurassic crown mammals, through reviewing state-of-the-art fossil and living mammal studies. This is considerably later than the prevailing paradigm, and has important ramifications for the causes, pattern, and pace of physiological evolution amongst synapsids. Most hypotheses argue that selection for either enhanced aerobic activity, or thermoregulation was the primary driver for synapsid physiological evolution, based on a range of fossil characters that have been linked to endothermy. We argue that, rather than either alternative being the primary selective force for the entirety of endothermic evolution, these characters evolved quite independently through time, and across the mammal family tree, principally as a response to shifting environmental pressures and ecological opportunities. Our interpretations can be tested using closely linked proxies for both factors, derived from study of fossils of a range of Jurassic and Cretaceous mammaliaforms and early mammals.

Time to synchronize our clocks: Connecting developmental mechanisms and evolutionary consequences of heterochrony

Heterochrony, defined as a change in the timing of developmental events altering the course of evolution, was first recognized by Ernst Haeckel in 1866. Haeckel's original definition was meant to explain the observed parallels between ontogeny and phylogeny, but the interpretation of his work became a source of controversy over time. Heterochrony took its modern meaning following the now classical work in the 1970-80s by Steven J. Gould, Pere Alberch, and co-workers. Predicted and described heterochronic scenarios emphasize the many ways in which developmental changes can influence evolution. However, while important examples of heterochrony detected with comparative morphological methods have multiplied, the more mechanistic understanding of this phenomenon lagged conspicuously behind. Considering the rapid progress in imaging and molecular tools available now for developmental biologists, this review aims to stress the need to take heterochrony research to the next level. It is time to synchronize the different levels of heterochrony research into a single analysis flow: from studies on organismal-level morphology to cells to molecules and genes, using complementary techniques. To illustrate how to achieve a more comprehensive understanding of phyletic morphological diversification associated with heterochrony, we discuss several recent case studies at various phylogenetic scales that combine morphological, cellular, and molecular analyses. Such a synergistic approach offers to more fully integrate phylogenetic and ontogenetic dimensions of the fascinating evolutionary phenomenon of heterochrony.

Grit your teeth and chew your food: Implications of food material properties and abrasives for rates of dental microwear formation in laboratory Sapajus apella (Primates)

Dental microwear analysis has been employed in studies of a wide range of modern and fossil animals, yielding insights into the biology/ecology of those taxa. Some researchers have suggested that dental microwear patterns ultimately relate back to the material properties of the foods being consumed, whereas others have suggested that, because exogenous grit is harder than organic materials in food, grit should have an overwhelming impact on dental microwear patterns. To shed light on this issue, laboratory-based feeding experiments were conducted on tufted capuchin monkeys [Sapajus apella] with dental impressions taken before and after consumption of different artificial foods. The foods were (1) brittle custom-made biscuits laced with either of two differently-sized aluminum silicate abrasives, and (2) ductile custom-made "gummies" laced with either of the two same abrasives. In both cases, animals were allowed to feed on the foods for 36 hours before follow-up dental impressions were taken. Resultant casts were analyzed using a scanning electron microscope. We asked five questions: (1) would the animals consume different amounts of each food item, (2) what types of dental microwear would be formed, (3) would rates of dental microwear differ between the consumption of biscuits (i.e., brittle) versus gummies (i.e., ductile), (4) would rates of dental microwear differ between foods including larger- versus smaller-grained abrasives, and (5) would rates of dental microwear differ between molar shearing and crushing facets in the animals in these experiments? Results indicated that (1) fewer biscuits were consumed when laced with larger-grained abrasives (as opposed to smaller-grained abrasives), but no such difference was observed in the consumption of gummies, (2) in all cases, a variety of dental microwear features was formed, (3) rates of dental microwear were higher when biscuits versus gummies were consumed, (4) biscuits laced with larger-grained abrasives caused a higher percentage of new features per item consumed, and (5) the only difference between facets occurred with the processing of biscuits, where crushing facets showed a faster rate of wear than shearing facets. These findings suggest that the impact of exogenous grit on dental microwear is the result of a dynamic, complex interaction between (at the very least) grit size, food material properties, and time spent feeding - which is further evidence of the multifactorial nature of dental microwear formation.

A new specimen provides insights into the anatomy of Irajatherium hernandezi, a poorly known probainognathian cynodont from the Late Triassic of southern Brazil

Irajatherium hernandezi is a poorly known non-mammaliaform cynodont from the Late Triassic of southern Brazil. A new specimen of this cynodont was found in recent fieldwork to the type-locality, the Linha São Luiz site (Candelária Sequence), providing new insights into the anatomy of this mammalian forerunner. This specimen comprises a partial skull preserving the left canine, two left and three right postcanines, and an isolated exoccipital; the left dentary with the canine and postcanines; a fragment of the right dentary; the proximal portion of the left partial humerus; the right scapula; and indeterminate fragments. Based on new material, it is here suggested that I. hernandezi presents: a rostrum broad and short, possibly long as the temporal region; three foramina on the lateral surface of the maxilla, that could correspond to the external openings of the rostral alveolar, infraorbital, and zygomaticofacial canals; a slender zygomatic arch and an absent postorbital bar; a posteriorly wide temporal fossa; a long secondary palate, slightly surpassing the level of the last postcanine tooth; the cerebral hemispheres of the cranial endocast divided by a median sulcus; the scapular blade long and straight, and the postscapular fossa absent in lateral aspect. Finally, I. hernandezi and other tritheledontids were included in a phylogenetic analysis of Eucynodontia. The analysis recovered unresolved relationships for ictidosaurs/tritheledontids, nested within a polytomy with Tritylodontidae and a clade composed by Pseudotherium argentinus, Botucaraitherium belarminoi, Brasilodon quadrangularis, and Mammaliaformes.

The influence of divergent reproductive strategies in shaping modularity and morphological evolution in mammalian jaws

Marsupial neonates are born at an earlier developmental stage than placental mammals, but the rapid development of their forelimbs and cranial skeleton allows them to climb to the pouch, begin suckling and complete their development ex utero. The mechanical environment in which marsupial neonates develop is vastly different from that of placental neonates, which exhibit a more protracted development of oral muscles and bones. This difference in reproductive strategy has been theorized to constrain morphological evolution in the oral region of marsupials. Here, we use 3D morphometrics to characterize one of these oral bones, the lower jaw (dentary), and assess modularity (pattern of covariation among traits), morphological disparity and rates of morphological evolution in two clades of carnivorous mammals: the marsupial Dasyuromorphia and placental fissiped Carnivora. We find that dasyuromorph dentaries have fewer modules than carnivorans and exhibit tight covariation between the angular and coronoid processes, the primary attachment sites for jaw-closing muscles. This pattern of modularity may result from the uniform action of muscles on the developing mandible during suckling. Carnivorans are free from this constraint and exhibit a pattern of modularity that more strongly reflects genetic and developmental signals of trait covariation. Alongside differences in modularity, carnivorans exhibit greater disparity and faster rates of morphological evolution compared with dasyuromorphs. Taken together, this suggests dasyuromorphs have retained a signal of trait covariation that reflects the outsized influence of muscular force during early development, a feature that may have impacted the ability of marsupial carnivores to explore specialized regions of morphospace.

Pendraig milnerae, a new small-sized coelophysoid theropod from the Late Triassic of Wales

We describe a new small-bodied coelophysoid theropod dinosaur, Pendraig milnerae gen. et sp. nov, from the Late Triassic fissure fill deposits of Pant-y-ffynnon in southern Wales. The species is represented by the holotype, consisting of an articulated pelvic girdle, sacrum and posterior dorsal vertebrae, and an associated left femur, and by two referred specimens, comprising an isolated dorsal vertebra and a partial left ischium. Our phylogenetic analysis recovers P. milnerae as a non-coelophysid coelophysoid theropod, representing the first-named unambiguous theropod from the Triassic of the UK. Recently, it has been suggested that Pant-y-ffynnon and other nearby Late Triassic to Early Jurassic fissure fill faunas might have been subjected to insular dwarfism. To test this hypothesis for P. milnerae, we performed an ancestral state reconstruction analysis of body size in early neotheropods. Although our results indicate that a reduced body size is autapomorphic for P. milnerae, some other coelophysoid taxa show a similar size reduction, and there is, therefore, ambiguous evidence to indicate that this species was subjected to dwarfism. Our analyses further indicate that, in contrast with averostran-line neotheropods, which increased in body size during the Triassic, coelophysoids underwent a small body size decrease early in their evolution.

Mechanical properties of food and masticatory behavior in llamas, Llama glama

Mammals typically process food items more extensively in their oral cavities than do other vertebrates. Dental morphology, jaw-muscle activity patterns, mandibular movements, and tongue manipulation work to facilitate oral fragmentation of dietary items. While processing mechanically challenging foods, mammals modulate mandibular movements and bite forces via recruitment of greater jaw-adductor muscle forces and protracted biting or chewing. Because jaw-loading patterns are influenced by magnitude; frequency; and duration of muscular, bite, and reaction forces during routine feeding behaviors, relatively larger jaws are thought to be more characteristic of mammals that experience higher masticatory loads due to the processing of mechanically challenging foods. The ease of food fracture during post-canine biting and chewing is mainly determined by food stiffness and toughness. Such foods have been associated with increased loading magnitude and/or greater amounts of cyclical loading (i.e., chewing duration). Dietary properties are thought to modulate cyclical loading through changes in chewing frequency and chewing investment. On the other hand, chewing frequency has been found to be independent of dietary properties in rabbits and primates; however, little evidence exists regarding the influence of dietary properties on these parameters in a broader range of mammals. Here, we assessed chewing behavior in seven adult llamas (Llama glama) processing foods with a wide range of mechanical properties (grain, hay, carrots, and dried corn). Each subject was filmed at 60 frames/s, with video slowed for frame-by-frame computer analysis to obtain length of feeding bout and number of chewing cycles for each food type. These parameters were used to calculate chewing frequency (chews/s), chewing investment (chews/g), and chewing duration (s/g). Chewing frequency was not significantly related to mechanical properties of food, but chewing investment and chewing duration were significantly related to dietary stiffness and toughness. Therefore, cyclical loading is positively influenced by stiff and tough foods. This suggests that variation in jaw morphology in extinct and extant mammals is positively related to dietary stiffness and toughness, which requires greater chewing investment and increased chewing duration.

The evolution of anteriorly directed molar occlusion in mammals

In non-mammalian synapsids and early mammals, evolutionary transformations in the feeding and hearing apparatuses are posited to have been prerequisites for the radiation of extant mammals. Unlike most vertebrates, including many early synapsids, mammals have precise dental occlusion, a lower jaw composed of one bone, and middle ear ossicles derived from ancestral jaw bones. We illuminate a related functional transition: therian mammals (eutherians and metatherians) evolved anteriorly directed chewing strokes, which are absent in other synapsid lineages. Anteriorly directed jaw movement during occlusion necessitates anteriorly directed muscle force vectors, and we posit that a shift in muscle orientation is reflected in the fossil record by the evolutionary appearance of a posteriorly positioned angular process in cladotherians (therians and their close kin). Anteriorly directed occlusion might have been absent in earlier synapsids because of the presence of attached middle ear elements in the posterior region of the jaw that prohibited the posterior insertion of jaw musculature. These changes to the masticatory apparatus in cladotherians are likely to have permitted the evolution of novel masticatory movements, including grinding in both the anterior and medial directions (e.g. rodents and ungulates, respectively). Thus, this evolutionary transition might have been a crucial prerequisite for the dietary diversification of therians.

Phylogeny, function and ecology in the deep evolutionary history of the mammalian forelimb

Mammals are the only living members of the larger clade Synapsida, which has a fossil record spanning 320 Ma. Despite the fact that much of the ecological diversity of mammals has been considered in the light of limb morphology, the ecological comparability of mammals to their fossil forerunners has not been critically assessed. Because of the wide use of limb morphology in testing ecomorphological hypothesis about extinct tetrapods, we sought: (i) to estimate when in synapsid history, modern mammals become analogues for predicting fossil ecologies; (ii) to document examples of ecomorphological convergence; and (iii) to compare the functional solutions of distinct synapsid radiations. We quantitatively compared the forelimb shapes of the multiple fossil synapsid radiations to a broad sample of extant Mammalia representing a variety of divergent locomotor ecologies. Our results indicate that each synapsid radiation explored different areas of morphospace and arrived at functional solutions that reflected their distinctive ancestral morphologies. This work counters the narrative of non-mammalian synapsid forelimb evolution as a linear progression towards more mammalian morphologies. Instead, a disparate array of early-evolving shapes subsequently contracted towards more mammal-like forms.

Jaw shape and mechanical advantage are indicative of diet in Mesozoic mammals

Jaw morphology is closely linked to both diet and biomechanical performance, and jaws are one of the most common Mesozoic mammal fossil elements. Knowledge of the dietary and functional diversity of early mammals informs on the ecological structure of palaeocommunities throughout the longest era of mammalian evolution: the Mesozoic. Here, we analyse how jaw shape and mechanical advantage of the masseter (MAM) and temporalis (MAT) muscles relate to diet in 70 extant and 45 extinct mammals spanning the Late Triassic-Late Cretaceous. In extant mammals, jaw shape discriminates well between dietary groups: insectivores have long jaws, carnivores intermediate to short jaws, and herbivores have short jaws. Insectivores have low MAM and MAT, carnivores have low MAM and high MAT, and herbivores have high MAM and MAT. These traits are also informative of diet among Mesozoic mammals (based on previous independent determinations of diet) and set the basis for future ecomorphological studies.

Dental microwear texture analysis as a tool for dietary discrimination in elasmobranchs

As abundant and widespread predators, elasmobranchs play influential roles in food-web dynamics of marine communities. Clearly, these trophic interactions have significant implications for fisheries management and marine conservation, yet elasmobranch diet is relatively understudied; for the majority of species little or no quantitative dietary data exist. This reflects the difficulties of direct observation of feeding and stomach contents analysis in wild elasmobranchs. Here, by quantifying the 3D surface textures that develop on tooth surfaces as a consequence of feeding, we show that tooth microwear varies with diet in elasmobranchs, providing a new tool for dietary analysis. The technique can be applied to small samples and individuals with no gut contents, and thus offers a way to reduce the impact on wild elasmobranch populations of analysing their dietary ecology, especially relevant in conservation of endangered species. Furthermore, because microwear accumulates over longer periods of time, analysis of texture overcomes the 'snapshot bias' of stomach contents analysis. Microwear texture analysis has the potential to be a powerful tool, complementing existing techniques such as stable isotope analysis, for dietary analysis in living and extinct elasmobranchs.

Phylogeny and foraging behaviour shape modular morphological variation in bat humeri

Bats show a remarkable ecological diversity that is reflected both in dietary and foraging guilds (FGs). Cranial ecomorphological adaptations linked to diet have been widely studied in bats, using a variety of anatomical, computational and mathematical approaches. However, foraging-related ecomorphological adaptations and the concordance between cranial and postcranial morphological adaptations remain unexamined in bats and limited to the interpretation of traditional aerodynamic properties of the wing (e.g. wing loading [WL] and aspect ratio [AR]). For this reason, the postcranial ecomorphological diversity in bats and its drivers remain understudied. Using 3D virtual modelling and geometric morphometrics (GMM), we explored the phylogenetic, ecological and biological drivers of humeral morphology in bats, evaluating the presence and magnitude of modularity and integration. To explore decoupled patterns of variation across the bone, we analysed whole-bone shape, diaphyseal and epiphyseal shape. We also tested whether traditional aerodynamic wing traits correlate with humeral shape. By studying 37 species from 20 families (covering all FGs and 85% of dietary guilds), we found similar patterns of variation in whole-bone and diaphyseal shape and unique variation patterns in epiphyseal shape. Phylogeny, diet and FG significantly correlated with shape variation at all levels, whereas size only had a significant effect on epiphyseal morphology. We found a significant phylogenetic signal in all levels of humeral shape. Epiphyseal shape significantly correlated with wing AR. Statistical support for a diaphyseal-epiphyseal modular partition of the humerus suggests a functional partition of shape variability. Our study is the first to show within-structure modular morphological variation in the appendicular skeleton of any living tetrapod. Our results suggest that diaphyseal shape correlates more with phylogeny, whereas epiphyseal shape correlates with diet and FG.

Molar occlusion and jaw roll in early crown mammals

Triconodontidae are considered the first carnivorous crown mammals. A virtual reconstruction of the masticatory cycle in the Late Jurassic Priacodon showed that triconodontid dental function is characterized by precise cutting on elongated crests. The combination of traits linked to both carnivorous diets (e.g. fore-aft cutting edges) and insectivorous diets (transverse crests and lobes) suggests a varied faunivorous diet appropriate to the small body size of most triconodontids. Total length of molar shear decreased with wear, suggesting a dietary shift during ontogeny. Embrasure occlusion is confirmed for P. fruitaensis as indicated by premolar positioning, facet orientation, and collision areas. Embrasure occlusion is considered a general feature of all Eutriconodonta, whereas the previously assumed Morganucodon-like pattern is limited to few early mammaliaforms. Unlike modern carnivores, significant roll of around 10° of the active hemimandible occurred during the power stroke. Roll was likely passive in Triconodontidae in contrast to active roll described for extant therians. The triconodontid molar series was highly uniform and adapted to a precise fit, with self-sharpening lower molar cusps. Whereas the uniformity ensured good cutting capabilities, it likely put the dentition under greater constraints, conserving the highly stereotyped nature of triconodontid molars for 60-85 Ma.

Integrated phylogenomic and fossil evidence of stick and leaf insects (Phasmatodea) reveal a Permian-Triassic co-origination with insectivores

Stick and leaf insects (Phasmatodea) are a distinctive insect order whose members are characterized by mimicking various plant tissues such as twigs, foliage and bark. Unfortunately, the phylogenetic relationships among phasmatodean subfamilies and the timescale of their evolution remain uncertain. Recent molecular clock analyses have suggested a Cretaceous-Palaeogene origin of crown Phasmatodea and a subsequent Cenozoic radiation, contrasting with fossil evidence. Here, we analysed transcriptomic data from a broad diversity of phasmatodeans and, combined with the assembly of a new suite of fossil calibrations, we elucidate the evolutionary history of stick and leaf insects. Our results differ from recent studies in the position of the leaf insects (Phylliinae), which are recovered as sister to a clade comprising Clitumninae, Lancerocercata, Lonchodinae, Necrosciinae and Xenophasmina. We recover a Permian to Triassic origin of crown Phasmatodea coinciding with the radiation of early insectivorous parareptiles, amphibians and synapsids. Aschiphasmatinae and Neophasmatodea diverged in the Jurassic-Early Cretaceous. A second spur in origination occurred in the Late Cretaceous, coinciding with the Cretaceous Terrestrial Revolution, and was probably driven by visual predators such as stem birds (Enantiornithes) and the radiation of angiosperms.

The earliest-known mammaliaform fossil from Greenland sheds light on origin of mammals

Synapsids are unique in having developed multirooted teeth and complex occlusions. These innovations evolved in at least two lineages of mammaliamorphs (Tritylodontidae and Mammaliaformes). Triassic fossils demonstrate that close to the origins of mammals, mammaliaform precursors were "experimenting" with tooth structure and function, resulting in novel patterns of occlusion. One of the most surprising examples of such adaptations is present in the haramiyidan clade, which differed from contemporary mammaliaforms in having two rows of cusps on molariform crowns adapted to omnivorous/herbivorous feeding. However, the origin of the multicusped tooth pattern present in haramiyidans has remained enigmatic. Here we describe the earliest-known mandibular fossil of a mammaliaform with double molariform roots and a crown with two rows of cusps from the Late Triassic of Greenland. The crown morphology is intermediate between that of morganucodontans and haramiyidans and suggests the derivation of the multicusped molariforms of haramiyidans from the triconodont molar pattern seen in morganucodontids. Although it is remarkably well documented in the fossil record, the significance of tooth root division in mammaliaforms remains enigmatic. The results of our biomechanical analyses (finite element analysis [FEA]) indicate that teeth with two roots can better withstand stronger mechanical stresses like those resulting from tooth occlusion, than teeth with a single root.

Reptile-like physiology in Early Jurassic stem-mammals

Despite considerable advances in knowledge of the anatomy, ecology and evolution of early mammals, far less is known about their physiology. Evidence is contradictory concerning the timing and fossil groups in which mammalian endothermy arose. To determine the state of metabolic evolution in two of the earliest stem-mammals, the Early Jurassic Morganucodon and Kuehneotherium, we use separate proxies for basal and maximum metabolic rate. Here we report, using synchrotron X-ray tomographic imaging of incremental tooth cementum, that they had maximum lifespans considerably longer than comparably sized living mammals, but similar to those of reptiles, and so they likely had reptilian-level basal metabolic rates. Measurements of femoral nutrient foramina show Morganucodon had blood flow rates intermediate between living mammals and reptiles, suggesting maximum metabolic rates increased evolutionarily before basal metabolic rates. Stem mammals lacked the elevated endothermic metabolism of living mammals, highlighting the mosaic nature of mammalian physiological evolution.

The TMJ Disc Is a Common Ancestral Feature in All Mammals, as Evidenced by the Presence of a Rudimentary Disc During Monotreme Development

The novel mammalian jaw joint, known in humans as the temporomandibular joint or TMJ, is cushioned by a fibrocartilage disc. This disc is secondarily absent in therian mammals that have lost their dentition, such as giant anteaters and some baleen whales. The disc is also absent in all monotremes. However, it is not known if the absence in monotremes is secondary to the loss of dentition, or if it is an ancestral absence. We use museum held platypus and echidna histological sections to demonstrate that the developing monotreme jaw joint forms a disc primordium that fails to mature and become separated from the mandibular condyle. We then show that monotreme developmental anatomy is similar to that observed in transgenic mouse mutants with reduced cranial musculature. We therefore suggest that the absence of the disc on monotremes is a consequence of the changes in jaw musculature associated with the loss of adult teeth. Taken together, these data indicate that the ancestors of extant monotremes likely had a jaw joint disc, and that the disc evolved in the last common ancestor of all mammals.

The use of extruded finite-element models as a novel alternative to tomography-based models: a case study using early mammal jaws

Finite-element (FE) analysis has been used in palaeobiology to assess the mechanical performance of the jaw. It uses two types of models: tomography-based three-dimensional (3D) models (very accurate, not always accessible) and two-dimensional (2D) models (quick and easy to build, good for broad-scale studies, cannot obtain absolute stress and strain values). Here, we introduce extruded FE models, which provide fairly accurate mechanical performance results, while remaining low-cost, quick and easy to build. These are simplified 3D models built from lateral outlines of a relatively flat jaw and extruded to its average width. There are two types: extruded (flat mediolaterally) and enhanced extruded (accounts for width differences in the ascending ramus). Here, we compare mechanical performance values resulting from four types of FE models (i.e. tomography-based 3D, extruded, enhanced extruded and 2D) in Morganucodon and Kuehneotherium. In terms of absolute values, both types of extruded model perform well in comparison to the tomography-based 3D models, but enhanced extruded models perform better. In terms of overall patterns, all models produce similar results. Extruded FE models constitute a viable alternative to the use of tomography-based 3D models, particularly in relatively flat bones.

Dietary differences in archosaur and lepidosaur reptiles revealed by dental microwear textural analysis

Reptiles are key components of modern ecosystems, yet for many species detailed characterisations of their diets are lacking. Data currently used in dietary reconstructions are limited either to the last few meals or to proxy records of average diet over temporal scales of months to years, providing only coarse indications of trophic level(s). Proxies that record information over weeks to months would allow more accurate reconstructions of reptile diets and better predictions of how ecosystems might respond to global change drivers. Here, we apply dental microwear textural analysis (DMTA) to dietary guilds encompassing both archosaurian and lepidosaurian reptiles, demonstrating its value as a tool for characterising diets over temporal scales of weeks to months. DMTA, involving analysis of the three-dimensional, sub-micrometre scale textures created on tooth surfaces by interactions with food, reveals that the teeth of reptiles with diets dominated by invertebrates, particularly invertebrates with hard exoskeletons (e.g. beetles and snails), exhibit rougher microwear textures than reptiles with vertebrate-dominated diets. Teeth of fish-feeding reptiles exhibit the smoothest textures of all guilds. These results demonstrate the efficacy of DMTA as a dietary proxy in taxa from across the phylogenetic range of extant reptiles. This method is applicable to extant taxa (living or museum specimens) and extinct reptiles, providing new insights into past, present and future ecosystems.

Complementary approaches to tooth wear analysis in Tritylodontidae (Synapsida, Mammaliamorpha) reveal a generalist diet

Stereoscopic microwear and 3D surface texture analyses on the cheek teeth of ten Upper Triassic to Lower Cretaceous tritylodontid (Mammaliamorpha) taxa of small/medium to large body size suggest that all were generalist feeders and none was a dietary specialist adapted to herbivory. There was no correspondence between body size and food choice. Stereomicroscopic microwear analysis revealed predominantly fine wear features with numerous small pits and less abundant fine scratches as principal components. Almost all analyzed facets bear some coarser microwear features, such as coarse scratches, large pits, puncture pits and gouges pointing to episodic feeding on harder food items or exogenous effects (contamination of food with soil grit and/or dust), or both. 3D surface texture analysis indicates predominantly fine features with large void volume, low peak densities, and various stages of roundness of the peaks. We interpret these features to indicate consumption of food items with low to moderate intrinsic abrasiveness and can exclude regular rooting, digging or caching behavior. Possible food items include plant vegetative parts, plant reproductive structures (seeds and seed-bearing organs), and invertebrates (i.e., insects). Although the tritylodontid tooth morphology and auto-occlusion suggest plants as the primary food resource, our results imply a wider dietary range including animal matter.

Untangling the Multiple Ecological Radiations of Early Mammals

The ecological diversification of early mammals is one of the most globally transformative events in Earth's history and the Cretaceous Terrestrial Revolution (KTR) and end-Cretaceous mass extinction are commonly hailed as catalysts. However, a confounding issue when examining this diversification is that it comprised nested radiations of mammalian subclades within the broader scope of mammalian evolution. In the past 200 million years, various independent groups experienced large-scale radiations, each involving ecological diversification from ancestral lineages of small insectivores; examples include Jurassic mammaliaforms, Late Cretaceous metatherians, and Cenozoic placentals. Here, we review these ecological radiations, highlighting the nuanced complexity of early mammal evolution, the value of ecomorphological fossil data, and the importance of phylogenetic context in macroevolutionary studies.

Why ruminating ungulates chew sloppily: Biomechanics discern a phylogenetic pattern

There is considerable debate regarding whether mandibular morphology in ungulates primarily reflects phylogenetic affinities or adaptation to specific diet. In an effort to help resolve this debate, we use three-dimensional finite element analysis (FEA) to assess the biomechanical performance of mandibles in eleven ungulate taxa with well-established but distinct dietary preferences. We found notable differences in the magnitude and the distribution of von Mises stress between Artiodactyla and Perissodactyla, with the latter displaying lower overall stress values. Additionally, within the order Artiodactyla the suborders Ruminantia and Tylopoda showed further distinctive stress patterns. Our data suggest that a strong phylogenetic signal can be detected in biomechanical performance of the ungulate mandible. In general, Perissodactyla have stiffer mandibles than Artiodactyla. This difference is more evident between Perissodactyla and ruminant species. Perissodactyla likely rely more heavily on thoroughly chewing their food upon initial ingestion, which demands higher bite forces and greater stress resistance, while ruminants shift comminution to a later state (rumination) where less mechanical effort is required by the jaw to obtain sufficient disintegration. We therefore suggest that ruminants can afford to chew sloppily regardless of ingesta, while hindgut fermenters cannot. Additionally, our data support a secondary degree of adaptation towards specific diet. We find that mandibular morphologies reflect the masticatory demands of specific ingesta within the orders Artiodactyla and Perissodactyla. Of particular note, stress patterns in the white rhinoceros (C. simum) look more like those of a general grazer than like other rhinoceros’ taxa. Similarly, the camelids (Tylopoda) appear to occupy an intermediate position in the stress patterns, which reflects the more ancestral ruminating system of the Tylopoda.

Functional tests of the competitive exclusion hypothesis for multituberculate extinction

Multituberculate mammals thrived during the Mesozoic, but their diversity declined from the mid-late Paleocene onwards, becoming extinct in the late Eocene. The radiation of superficially similar, eutherian rodents has been linked to multituberculate extinction through competitive exclusion. However, characteristics providing rodents with a supposed competitive advantage are currently unknown and comparative functional tests between the two groups are lacking. Here, a multifaceted approach to craniomandibular biomechanics was taken to test the hypothesis that superior skull function made rodents more effective competitors. Digital models of the skulls of four extant rodents and the Upper Cretaceous multituberculate Kryptobaatar were constructed and used (i) in finite-element analysis to study feeding-induced stresses, (ii) to calculate metrics of bite force production and (iii) to determine mechanical resistances to bending and torsional forces. Rodents exhibit higher craniomandibular stresses and lower resistances to bending and torsion than the multituberculate, apparently refuting the competitive exclusion hypothesis. However, rodents optimize bite force production at the expense of higher skull stress and we argue that this is likely to have been more functionally and selectively important. Our results therefore provide the first functional lines of evidence for potential reasons behind the decline of multituberculates in the changing environments of the Paleogene.

Good Vibrations: The Evolution of Whisking in Small Mammals

While most mammals have whiskers, some tactile specialists-mainly small, nocturnal, and arboreal species-can actively move their whiskers in a symmetrical, cyclic movement called whisking. Whisking enables mammals to rapidly, tactually scan their environment to efficiently guide locomotion and foraging in complex habitats. The muscle architecture that enables whisking is preserved from marsupials to primates, prompting researchers to suggest that a common ancestor might have had moveable whiskers. Studying the evolution of whisker touch sensing is difficult, and we suggest that measuring an aspect of skull morphology that correlates with whisking would enable comparisons between extinct and extant mammals. We find that whisking mammals have larger infraorbital foramen (IOF) areas, which indicates larger infraorbital nerves and an increase in sensory acuity. While this relationship is quite variable and IOF area cannot be used to solely predict the presence of whisking, whisking mammals all have large IOF areas. Generally, this pattern holds true regardless of an animal's substrate preferences or activity patterns. Data from fossil mammals and ancestral character state reconstruction and tracing techniques for extant mammals suggest that whisking is not the ancestral state for therian mammals. Instead, whisking appears to have evolved independently as many as seven times across the clades Marsupialia, Afrosoricida, Eulipotyphla, and Rodentia, with Xenarthra the only placental superordinal clade lacking whisking species. However, the term whisking only captures symmetrical and rhythmic movements of the whiskers, rather than all possible whisker movements, and early mammals may still have had moveable whiskers. Anat Rec, 2018. © 2018 American Association for Anatomy.

Pterosaur dietary hypotheses: a review of ideas and approaches

Pterosaurs are an extinct group of Mesozoic flying reptiles, whose fossil record extends from approximately 210 to 66 million years ago. They were integral components of continental and marginal marine ecosystems, yet their diets remain poorly constrained. Numerous dietary hypotheses have been proposed for different pterosaur groups, including insectivory, piscivory, carnivory, durophagy, herbivory/frugivory, filter-feeding and generalism. These hypotheses, and subsequent interpretations of pterosaur diet, are supported by qualitative (content fossils, associations, ichnology, comparative anatomy) and/or quantitative (functional morphology, stable isotope analysis) evidence. Pterosaur dietary interpretations are scattered throughout the literature with little attention paid to the supporting evidence. Reaching a robustly supported consensus on pterosaur diets is important for understanding their dietary evolution, and their roles in Mesozoic ecosystems. A comprehensive examination of the pterosaur literature identified 314 dietary interpretations (dietary statement plus supporting evidence) from 126 published studies. Multiple alternative diets have been hypothesised for most principal taxonomic pterosaur groups. Some groups exhibit a high degree of consensus, supported by multiple lines of evidence, while others exhibit less consensus. Qualitative evidence supports 87.3% of dietary interpretations, with comparative anatomy most common (62.1% of total). More speciose groups of pterosaur tend to have a greater range of hypothesised diets. Consideration of dietary interpretations within alternative phylogenetic contexts reveals high levels of consensus between equivalent monofenestratan groups, and lower levels of consensus between equivalent non-monofenestratan groups. Evaluating the possible non-biological controls on apparent patterns of dietary diversity reveals that numbers of dietary interpretations through time exhibit no correlation with patterns of publication (number of peer-reviewed publications through time). 73.8% of dietary interpretations were published in the 21st century. Overall, consensus interpretations of pterosaur diets are better accounted for by non-biological signals, such as the impact of the respective quality of the fossil record of different pterosaur groups on research levels. That many interpretations are based on qualitative, often untestable lines of evidence adds significant noise to the data. More experiment-led pterosaur dietary research, with greater consideration of pterosaurs as organisms with independent evolutionary histories, will lead to more robust conclusions drawn from repeatable results. This will allow greater understanding of pterosaur dietary diversity, disparity and evolution and facilitate reconstructions of Mesozoic ecosystems.

Three-dimensional tooth surface texture analysis on stall-fed and wild boars (Sus scrofa)

Categorizing the archaeological remains of Sus scrofa as domesticated “pigs” or wild “boars” is often difficult because of their morphological and genetic similarities. For this purpose, we tested whether feeding ecological change of S. scrofa that accompanied their domestication can be detected based on the three-dimensional texture created on the tooth enamel surface by mastication. We scanned the lower tooth surface of one wild and one stall-fed populations of modern S. s. leucomystax and one wild population of S. s. riukiuanus by using a confocal laser microscope. The average body weight of S. s. leucomystax is twice as heavier as that of S. s. riukiuanus. The textures were quantified using the industrial “roughness” standard, ISO 25178, to prevent inter-observer errors and to distinguish small differences that were difficult to detect by two dimensional image observation. The values of parameters related to height and volume were significantly larger in the stall-fed population. Twenty parameters differed significantly between the stall-fed and wild population of S. s. leucomystax, which indicated that the feeding ecological difference affected the ISO parameters of the two boar populations. Six parameters also differed between the wild populations of S. s. leucomystax and S. s. riukiuanus. Surprisingly, no parameter differed between the populations of stall-fed S. s. leucomystax and wild S. s. riukiuanus. Consumption of hard nuts and/or agricultural fruits and crops by the wild population of S. s. riukiuanus may have produced a tooth surface texture similar to that of the stall-fed population of S. s. leucomystax. Further analysis of S. s. riukiuanus with a known diet is necessary to conclude whether ISO parameters reflect the dietary transition accompanying the domestication of Sus (e.g., wild, semi-domestic, and domestic). Until then, caution is needed in discriminating domesticated populations from wild populations that mainly feed on hard objects.