Extra adsorption and adsorbate superlattice formation in metal-organic frameworks

Understanding the origins of reversible and hysteretic pathways of adsorption phase transitions in metal-organic frameworks

Phase behavior of nanoconfined fluids adsorbed in metal-organic frameworks is of paramount importance for the design of advanced materials for energy and gas storage, separations, electrochemical devices, sensors, and drug delivery, as well as for the pore structure characterization. Phase transformations in adsorbed fluids often involve long-lasting metastable states and hysteresis that has been well-documented in gas adsorption-desorption and nonwetting fluid intrusion-extrusion experiments. However, theoretical prediction of the observed nanophase behavior remains a challenging problem. The mesoscopic canonical, or mesocanonical, ensemble (MCE) is devised to study the nanophase behavior under conditions of controlled fluctuations to stabilize metastable and labile states. Here, we implement and apply the MCE Monte Carlo (MCEMC) simulation scheme to predict the origins of reversible and hysteric adsorption phase transitions in a series of practical MOF materials, including IRMOF-1, ZIF-412, UiO-66, Cu-BTC, IRMOF-74-V, VII, and IX. The MCEMC method, called the gauge cell method, allows to produce Van der Waals type isotherms with distinctive swings around the phase transition regions. The constructed isotherms determine the positions of phase equilibrium and spinodals, as well as the nucleation barriers separating metastable states. We demonstrate the unique capabilities of the MCEMC method in quantitative predictions of experimental observations compared with the conventional grand canonical and canonical ensemble simulations. The MCEMC method is implemented in the open-source RASPA and LAMMPS software packages and recommended for studies of adsorption behavior and pore structure characterization of MOFs and other nanoporous materials.

Dual-modal analysis of cis-diols in traditional Chinese medicine via boronic acid incorporated metal organic frameworks

In this study, a boronic acid incorporated metal organic frameworks (inBA-MIL-100) were prepared via metal-ligand-fragment co-assembly strategy. The prepared frameworks can be served either as enrichment sorbent or SALDI-MS matrix for cis-diol containing molecules. Thus, a dual-modal analysis of cis-diols in traditional Chinese medicine has been established. Several significant advantages of the proposed strategy have been experimentally demonstrated, including high selectivity, high binding capacity (70 mg/g), good generality (5-250 μg/mL for HPLC based sample preparation, 10-500 ng/mL for SALDI-MS), high sensitivity (LOD: 180 ng/mL for HPLC based sample preparation, 5 ng/mL for SALDI-MS) and reliable quantification (RSD<3 % for HPLC based sample preparation, RSD<12 % for SALDI-MS) performance. Finally, the successful analysis of various cis-diols (active component and mycotoxin) in various Chinese traditional medicine was also achieved.

Tailoring the Electrochemical Responses of MOF-74 Via Dual-Defect Engineering for Superior Energy Storage

Rationally designed defects in a crystal can confer unique properties. This study showcases a novel dual-defects engineering strategy to tailor the electrochemical response of metal-organic framework (MOF) materials used for electrochemical energy storage. Salicylic acid (SA) is identified as an effective modulator to control MOF-74 growth and induce structural defects, and cobalt cation doping is adopted for introducing a second type of defect. The resulting dual-defects engineered bimetallic MOF exhibits a discharging capacity of 218.6 mAh g-1, 4.4 times that of the pristine MOF-74, and significantly improved cycling stability. Moreover, the engineered MOF-74(Ni0.675Co0.325)-8//Zn aqueous battery shows top energy/power density performances for Ni-Zn batteries (266.5 Wh kg-1, 17.22 kW kg-1). Comprehensive investigations reveal that engineered defects modify the local coordination environment and promote the in situ electrochemical reconfiguration during operation to significantly boost the electrochemical activity. This work suggests that rational tailoring of the defects within the MOF crystal is an effective strategy to manipulate the coordination environment of the metal centers and the corresponding electrochemical reconfiguration for electrochemical applications.

Recent advances in small-angle scattering techniques for MOF colloidal materials

This paper reviews the recent progress of small angle scattering (SAS) techniques, mainly including X-ray small angle scattering technique (SAXS) and neutron small angle scattering (SANS) technique, in the study of metal-organic framework (MOF) colloidal materials (CMOFs). First, we introduce the application research of SAXS technique in pristine MOFs materials, and review the studies on synthesis mechanism of MOF materials, the pore structures and fractal characteristics, as well as the spatial distribution and morphological evolution of foreign molecules in MOF composites and MOF-derived materials. Then, the applications of SANS technique in MOFs are summarized, with emphasis on SANS data processing method, structure modeling and quantitative structural information extraction. Finally, the characteristics and developments of SAS techniques are commented and prospected. It can be found that most studies on MOF materials with SAS techniques focus mainly on nanoporous structure characterization and the evolution of pore structures, or the spatial distribution of other foreign molecules loaded in MOFs. Indeed, SAS techniques take an irreplaceable role in revealing the structure and evolution of nanopores in CMOFs. We expect that this paper will help to understand the research status of SAS techniques on MOF materials and better to apply SAS techniques to conduct further research on MOF and related materials.

Asymmetric Assembly in Microdroplets: Efficient Construction of MOF Micromotors for Anti-Gravity Diffusion

Janus-micromotors, as efficient self-propelled materials, have garnered considerable attention for their potential applications in non-agitated liquids. However, the design of micromotors is still challenging and with limited approaches, especially concerning speed and mobility in complex environments. Herein, a two-step spray-drying approach encompassing symmetrical assembly and asymmetrical assembly is introduced to fabricate the metal-organic framework (MOF) Janus-micromotors with hierarchical pores. Using a spray-dryer, a symmetrical assembly is first employed to prepare macro-meso-microporous UiO-66 with intrinsic micropores (<0.5 nm) alongside mesopores (≈24 nm) and macropores (≈400 nm). Subsequent asymmetrical assembly yielded the UiO-66-Janus loaded with the reducible nanoparticles, which underwent oxidation by KMnO4 to form MnO2 micromotors. The micromotors efficiently generated O2 for self-propulsion in H2O2, exhibiting ultrahigh speeds (1135 µm s-1, in a 5% H2O2 solution) and unique anti-gravity diffusion effects. In a specially designed simulated sand-water system, the micromotors traversed from the lower water to the upper water through the sand layer. In particular, the as-prepared micromotors demonstrated optimal efficiency in pollutant removal, with an adsorption kinetic coefficient exceeding five times that of the micromotors only possessing micropores and mesopores. This novel strategy fabricating Janus-micromotors shows great potential for efficient treatment in complex environments.

CO2 Adsorption in a Robust Iron(III) Pyrazolate-Based MOF: Molecular-Level Details and Frameworks Dynamics From Powder X-ray Diffraction Adsorption Isotherms

Understanding adsorption processes at the molecular level, with multi-technique approaches, is nowadays at the frontier of porous materials research. In this work it is shown that with a proper data treatment, in situ high-resolution powder X-ray diffraction (HR-PXRD) at variable temperature and gas pressure can reveal atomic details of the accommodation sites, the framework dynamics as well as thermodynamic information (isosteric heat of adsorption) of the CO2 adsorption process in the robust iron(III) pyrazolate-based MOF Fe2(BDP)3 [H2BDP = 1,4-bis(1H-pyrazol-4-yl)benzene]. Highly reliable "HR-PXRD adsorption isotherms" can be constructed from occupancy values of CO2 molecules. The "HR-PXRD adsorption isotherms" accurately match the results of conventional static and dynamic gas sorption experiments and Monte Carlo simulations. These results are indicative of the impact of the molecular-level behavior on the bulk properties of the system under study and of the potential of the presented multi-technique approach to understand adsorption processes in metal-organic frameworks.

Visualizing dynamic competitive adsorption processes between iodine and methyl iodide within single covalent organic framework crystals

Covalent organic frameworks (COFs) are important porous adsorbents for volatile iodine (I2) and methyl iodide (CH3I). In situ monitoring of the dynamic adsorption process of single COF crystals toward I2 and CH3I is a critical and fundamental issue for understanding the reaction mechanism and improving the sorption performance. Here, we report operando real-time dark-field optical microscopy (DFM) imaging of visually studying the dynamic adsorption behavior of LZU-111 (LZU=Lanzhou University) COFs in the I2/CH3I binary gaseous mixture at the single-crystal level. Time-lapse imaging shows that the uptake of CH3I and I2 results in the R intensity increase and B intensity decrease of the DFM images. Employing the R and B intensities as two indicators, we find an unusual blinking of R/B intensities from single LZU-111 crystals, which is attributed to the intermittent sorption-desorption processes of CH3I and I2 within the LZU-111 framework. The visualization of the dynamic reaction process provides clear evidence that the competitive adsorption between CH3I and I2 goes through a multi-time and oscillatory reaction pathway instead of a successive procedure. Combined with theoretical calculations, the difference in the migration capability and initial pressure is identified for initiating the intermittent blinking events.

CO2-Sensitive Porous Magnet: Antiferromagnet Creation from a Paramagnetic Charge-Transfer Layered Metal-Organic Framework

Porous magnets that undergo a magnetic phase transition in response to gaseous adsorbates are desirable for the development of sustainable sensing and memory devices. Familiar gases such as O2 and CO2 are one class of target adsorbates because of their close association with life sciences and environmental issues; however, it is not easy to develop magnetic devices that respond to these ubiquitous gases. To date, only three examples of gas-responsive magnetic phase transitions have been demonstrated: (i) from a ferrimagnet to an antiferromagnet, (ii) its vice versa (i.e., change of magnetic phase), and (iii) from a ferrimagnet to a paramagnet (i.e., erasure of the magnetic phase). However, the creation of a magnet, meaning the change from a nonmagnet to a magnet by O2 or CO2 gas adsorption and magnetic switching by this phenomenon have not yet been explored. Herein, we report a CO2-induced antiferromagnet modified from a paramagnetic charge-flexible layered compound, [{Ru2(2,4-F2PhCO2)4}2TCNQ(OEt)2] (1; 2,4-F2PhCO2- = 2,4-difluorobenzoate; TCNQ(OEt)2 = 2,5-diethoxy-7,7,8,8-tetracyanoquinodimethane), where three molar equivalents of CO2 was accommodated at a CO2 pressure of 100 kPa. The magnetic change originates from charge fluctuation due to the transfer of electrons moving from the electron-donor to the electron-acceptor unit or vice versa, resulting in a change in the electron distribution induced by CO2 adsorption/desorption in the donor-acceptor-type charge transfer framework. Owing to the reversible electronic state change upon CO2 adsorption/desorption, these magnetic phases are switched, accompanied by modification of the electrical conductivity, which is boosted by the CO2 accommodation. This is the first example of the creation of a CO2-responsive magnet, which is promising for novel molecular multifunctional devices.

Boosted ability of ZIF-8 for early-stage adsorption and degradation of chemical warfare agent simulants

Efficient adsorption of hazardous substances from the environment is crucial owing to the considerable risks they pose to both humans and ecosystems. Consequently, the development of porous materials with strong adsorption capabilities for hazardous substances, such as chemical warfare agents (CWAs), is pivotal for safeguarding human lives. Specifically, the early-stage adsorption proficiency of the adsorbents plays a vital role in determining their effectiveness as ideal adsorbents. Herein, we report the efficient adsorption of CWA simulants using thermally treated ZIF-8 (T-ZIF-8). The T-ZIF-8 samples were prepared by subjecting ZIF-8 to a simple thermal treatment, which resulted in a more positive surface charge with extra open metal sites. Although the pore volume of T-ZIF-8 decreased after thermal treatment, the positive surface charge of T-ZIF-8 proved advantageous for the adsorption of the CWA simulants. As a result, the adsorption capacity of T-ZIF-8 for the CWA simulants improved compared to that of pure ZIF-8. Notably, T-ZIF-8 exhibited a remarkably enhanced adsorption ability in the early stage of exposure to the CWA simulants, possibly due to the effective polar interactions between T-ZIF-8 and the simulants via the electron-rich components within the CWA simulants. Moreover, the enhanced adsorption capacity of T-ZIF-8 led to the fast degradation of simulant compared to pure ZIF-8. T-ZIF-8 also demonstrated excellent stability over three adsorption cycles. These findings highlight that T-ZIF-8 is an outstanding material for the early-stage adsorption and degradation of CWA simulants, offering high effectiveness and stability.

Synergistic Catalysis of Cobalt Tetroxide and Bamboo-Shaped Carbon Nanotubes Doped with Nitrogen for Oxygen Reduction in Zn-Air Batteries

Zinc-air batteries (ZABs) have been considered as one of the most emerging systems for energy conversion and storage. However, the preparation of highly efficient oxygen reduction reaction (ORR) catalysts on an air cathode is still faced with significant challenges. Herein, we report a secondary nitrogen source strategy for fine-tuning the active center, which provides a carbon-based hierarchical porous catalyst (termed Co3O4@N/CNT-1000) for highly efficient ORR activity (E1/2 = 0.87 V, JL = 5.32 mA cm-2, and Eonset = 1.021 V) and excellent stability. Controlled experiments demonstrate that such high activity derives from the synergistic effect of cobalt tetroxide and bamboo-shaped carbon nanotubes doped with nitrogen, prepared by the pyrolysis of a two-dimensional metal-organic framework nanosheet (termed NTU-70) and melamine. Furthermore, the ZAB assembled with Co3O4@N/CNT-1000 displays high specific capacity (854 mA h g-1Zn) and power density (179 mW cm-2), excellent long-term cycling (330 h), and durable charging/discharging ability.

Elastic heterogeneity governs asymmetric adsorption-desorption in a soft porous crystal

Metal-organic frameworks (MOFs), which possess a high degree of crystallinity and a large surface area with tunable inorganic nodes and organic linkers, exhibit high stimuli-responsiveness and molecular adsorption selectivity that enable various applications. The adsorption in MOFs changes the crystalline structure and elastic moduli. Thus, the coexistence of adsorbed/desorbed sites makes the host matrices elastically heterogeneous. However, the role of elastic heterogeneity in the adsorption-desorption transition has been overlooked. Here, we show the asymmetric role of elastic heterogeneity in the adsorption-desorption transition. We construct a minimal model incorporating adsorption-induced lattice expansion/contraction and an increase/decrease in the elastic moduli. We find that the transition is hindered by the entropic and energetic effects which become asymmetric in the adsorption process and desorption process, leading to the strong hysteretic nature of the transition. Furthermore, the adsorbed/desorbed sites exhibit spatially heterogeneous domain formation, implying that the domain morphology and interfacial area between adsorbed/desorbed sites can be controlled by elastic heterogeneity. Our results provide a theoretical guideline for designing soft porous crystals with tunable adsorption hysteresis and the dispersion and domain morphology of adsorbates using elastic heterogeneity.

Water-Etched Approach to Hierarchically Porous Metal-Organic Frameworks with High Stability

The development of hierarchically porous metal-organic frameworks (MOFs) with high stability is desirable to expand their applications but remains challenging. Herein, an anionic sodalite-type microporous MOF (Yb-TTCA; TTCA3- = triphenylene-2,6,10-tricarboxylate) was synthesized, which shows outstanding catalytic activities for the cycloaddition of CO2 into cyclic carbonates. Moreover, the microporous Yb-TTCA can be transformed into a hierarchical micro- and mesoporous Yb-TTCA by water treatment with the mesopore sizes of 2 to 12 nm. The hierarchically porous Yb-TTCA (HP-Yb-TTCA) not only exhibits a high thermal stability up to 500 °C but also shows a high chemical stability in aqueous solutions with pH values ranging from 2 to 12. In addition, the HP-Yb-TTCA displays enhanced performance for the removal of organic dyes in comparison with microporous Yb-TTCA. This work provides a facile way to construct hierarchically porous MOF materials.

Chiral-Controlled Cyclic Chemiluminescence Reactions for the Analysis of Enantiomer Amino Acids

The similarity and complexity of chiral amino acids (AAs) in complex samples remain a significant challenge in their analysis. In this work, the chiral metal-organic framework (MOF)-controlled cyclic chemiluminescence (CCL) reaction is developed and utilized in the analysis of enantiomer AAs. The chiral MOF of d-Co_0.75Zn_0.25-MOF-74 is designed and prepared by modifying the Co_0.75Zn_0.25-MOF-74 with d-tartaric acid. The developed chiral bimetallic MOF can not only offer the chiral recognize sites but also act as the catalyst in the cyclic luminol-H₂O₂ reaction. Moreover, a distinguishable CCL signal can be obtained on enantiomer AAs via the luminol-H₂O₂ reaction with the control of d-Co_0.75Zn_0.25-MOF-74. The amplified difference of enantiomer AAs can be quantified by the decay coefficient (k-values) which are calculated from the exponential decay fitting of their obtained CCL signals. According to simulation results, the selective recognition of 19 pairs of AAs is controlled by the pore size of the MOF-74 and their hydrogen-bond interaction with d-tartaric acid on the chiral MOF. Furthermore, the k-values can also be used to estimate the change of chiral AAs in complex samples. Consequently, this chiral MOF-controlled CCL reaction is applied to differentiate enantiomer AAs involved in the quality monitoring of dairy products and auxiliary diagnosis, which provides a new approach for chiral studies and their potential applications.

Efficient capture and storage of ammonia in robust aluminium-based metal-organic frameworks

The development of stable sorbent materials to deliver reversible adsorption of ammonia (NH₃) is a challenging task. Here, we report the efficient capture and storage of NH₃ in a series of robust microporous aluminium-based metal-organic framework materials, namely MIL-160, CAU-10-H, Al-fum, and MIL-53(Al). In particular, MIL-160 shows high uptakes of NH₃ of 4.8 and 12.8 mmol g^-1 at both low and high pressure (0.001 and 1.0 bar, respectively) at 298 K. The combination of in situ neutron powder diffraction, synchrotron infrared micro-spectroscopy and solid-state nuclear magnetic resonance spectroscopy reveals the preferred adsorption domains of NH₃ molecules in MIL-160, with H/D site-exchange between the host and guest and an unusual distortion of the local structure of [AlO₆] moieties being observed. Dynamic breakthrough experiments confirm the excellent ability of MIL-160 to capture of NH₃ with a dynamic uptake of 4.2 mmol g^-1 at 1000 ppm. The combination of high porosity, pore aperture size and multiple binding sites promotes the significant binding affinity and capacity for NH₃, which makes it a promising candidate for practical applications.

Nanoscale molecular rectifiers

The use of molecules bridged between two electrodes as a stable rectifier is an important goal in molecular electronics. Until recently, however, and despite extensive experimental and theoretical work, many aspects of our fundamental understanding and practical challenges have remained unresolved and prevented the realization of such devices. Recent advances in custom-designed molecular systems with rectification ratios exceeding 10⁵ have now made these systems potentially competitive with existing silicon-based devices. Here, we provide an overview and critical analysis of recent progress in molecular rectification within single molecules, self-assembled monolayers, molecular multilayers, heterostructures, and metal-organic frameworks and coordination polymers. Examples of conceptually important and best-performing systems are discussed, alongside their rectification mechanisms. We present an outlook for the field, as well as prospects for the commercialization of molecular rectifiers.

Green synthesis of a hydrophobic metal-organic gel for the capture of trace odorous hexanal from humid air

The development of superhydrophobic adsorbents for the capture of trace volatile organic compounds (VOCs) from humid indoor air is still a challenge. Herein, we reported the formation of a granular zinc-based metal-organic gel, i.e., ZIF-412(gel) by optimizing the synthesis conditions. The thermally stable xerogel exhibited high surface area (1008 m²/g), hydrophobicity, and viscosity for self-depositing on the substrate such as non-woven fibers. Dynamic adsorption experiments under various humidity conditions demonstrated as-synthesized ZIF-412(gel) owned excellent VOC (hexanal) adsorption performance with adsorption capacity higher than commercial activated carbon and some water-stable MOFs including ZIF-8, ZIF-67, MIL-101(Cr) and ZIF-414. ZIF-412(gel) could be regenerated at temperature as low as 358 K without obvious loss in adsorption capacity. The adsorption mechanism of hexanal over ZIF-412(gel) is also simulated by Grand canonical Monte Carlo (GCMC).

Molecular Compartments Created in Metal-Organic Frameworks for Efficient Visible-Light-Driven CO2 Overall Conversion

We report the construction of molecular compartments by the growth of narrow-band semiconductor nanoparticles, tungsten oxide and its hydrate, in the mesopores of a metal-organic framework (MOF), MIL-100-Fe. The location of these nanoparticles in pores and their spatial arrangement across the MOF crystal are unveiled by powder X-ray diffraction and small-angle neutron scattering, respectively. Such a composition with pore-level precision leads to efficient overall conversion of gas-phase CO₂ and H₂O to CO, CH₄, and H₂O₂ under visible light. When WO₃·H₂O nanoparticles are positioned in 2.5 nm mesopores with 24 wt %, the resulting composite, namely, 24%-WO₃·H₂O-in-MIL-100-Fe, exhibits a CO₂ reduction rate of 0.49 mmol·g^-1·h^-1 beyond 420 nm and an apparent quantum efficiency of 1.5% at 420 nm. These performances stand as new benchmarks for visible-light-driven CO₂ overall conversion. In addition to the size and location of semiconductor nanoparticles, the coordinated water species in the crystal are found critical for high catalytic activity, an aspect usually overlooked.

Successive constructions of regular tetra-, hexa- and octanuclear microporous polyoxovanadates(III) for gas adsorption

Pyrazole-assisted tetranuclear microporous polyoxovanadates(III) (POVs) (NH₄)₂K₂[V₄(μ₂-OH)₄(ox)₄(pz)₄]·9H₂O (1, ox = oxalate and pz = pyrazole) and (NH₄)₂Na₂[V₄(μ₂-OH)₄(ox)₄(4-mpz)₄]·7H₂O (2, 4-mpz = 4-methylpyrazole) have been constructed in reduced media, along with their triazole neutral hexa- and octanuclear products K₂[V₆(μ₂-OH)₆(ox)₆(Hdatrz)₆]Cl₂·29.5H₂O (3) and [V₈(μ₂-OH)₈(SO₃)₈(Hdatrz)₈]·38H₂O (4, Hdatrz = 1H-1,2,4-triazole-3,5-diamine) successively. Both polyanionic structures of 1 and 2 share similar inorganic building blocks that consist of regular {V₄(μ₂-OH)₄} skeletons with an inner diameter of 2.8 Å, while a paddle wheel-shaped cluster 3 contains a {V₆(μ₂-OH)₆} skeleton with two chlorides encapsulated around the center of the ring, occupying a hole of 3.7 Å. An interesting isolated intrinsic polyoxometalate-based metal-organic framework (POMOF) 4 exists as an octanuclear petaloid-like skeleton {V₈(μ₂-OH)₈(SO₃)₈} with an inner diameter of 5.2 Å. Bond valence sum calculations manifest that all V ions have severely reduced +3 oxidation states in 1-4, which are supported by charge balance, structural and magnetic data. Moreover, gas adsorptions indicate that 1, 2 and 4 can adsorb CO₂ and O₂ more favorably than N₂, CH₄ and H₂ gases. Compared with 1 and 2, due to the functionalization of microchannels with Lewis base amino and hydroxy groups and uncoordinated azolate N-donors inside POMOF 4, it should have notable affinities toward CO₂ adsorption.

Fabrication of environmentally-friendly composited sponges for efficient removal of fluoroquinolones antibiotics from water

In this study, two environmentally-friendly macroscopically formal (PVF) composited sponges (PL and PLS) functionalized with lignin and lignosulfonate, respectively, were fabricated by a one-step mechanical foaming method. PLS, obtained with the fed mass ratio of 0.3:1 lignosulfonate to PVF in the preparation process, possessed a large specific surface area of approximately 22.396 m²/g, a three-dimensional skeleton structure with a skeletal density of 3.236 g/cm³, and 0.338 mmol/g of acidic oxygen-containing groups. Thus, it showed a high adsorption capacity of 0.16-0.24 mmol/g in removing seven antibiotics, of the popular fluoroquinolones (FQs) family from water. The contributions of hydrogen bonding, electrostatic attraction (EA) and π-π electron donor-acceptor interaction to the adsorption of FQs onto the PL and PLS sponges were analyzed systematically by investigating the pH dependence of the adsorption capacity, and the changes in adsorption of two sub structural analogs of FQs as molecular probes, and by performing theoretical calculations. The EA between the acidic oxygen-containing groups on the sponges and the amino groups of FQs played a dominant role in adsorption in near neutral conditions, leading to a superior adsorption performance for PLS. Overall, the composited sponges have the advantages of simple production, environmental-friendliness, convenient recycle, and low cost, which renders them potentially viable in treating real wastewater containing FQs.

Synthesis, modifications and applications of MILs Metal-organic frameworks for environmental remediation: The cutting-edge review

Ever-increasing anthropogenic activities are radically deteriorating the environment by causing severe pollution. Thus, curtailing the environmental pollution and promotion of sustainable development, are the hot issues confronted by scientists in this modern era. Metal-organic frameworks (MOFs) have been highly recognized as emerging promising materials for environmental remediation due to their versatile structure and extraordinary properties. Among them, MILs (MIL = Matérial Institute of Lavoisier) are the series of MOFs mostly known for their incredible stability, unique tailorable pore structures, and astounding versatile environmental applications. Their exclusive physiochemical properties and multifunctionality make them proficient for a wide range of pollutants removal in the exposure of versatile harsh environments, compared to other MOFs. This piece of research summarizes the state-of-the-art of development of MILs on the broad spectrum, highlighting their specificities, such as synthesis techniques, modifications and applications for environmental remediation. However, MILs wonderful properties and extraordinary applications in multiple fields, their deployment on practical and commercial-scale pollutants remediation is hindered by insufficient scientific research on underlying mechanisms and relationships. Henceforth, this review not only signifies the emerging importance of MILs for environmental applications but also indicates the urgency to maximize the scientific research for exploitation of MOFs on a practical level and promotion of green technologies for environmental remediation.

Construction of nanorod structure confined Pt@CeO2 catalyst by in-situ encapsulation strategy for low temperature catalytic oxidation of toluene

In this work, the Pt@CeO2 catalyst with the nanorod structure (Pt@CeO2-R) and the bunch structure (Pt@CeO2-B) were synthesized through in situ encapsulation strategy of Pt species in Ce-MOFs, respectively. It is discovered that the Pt@CeO2-R catalyst owned the best catalytic performance for toluene catalytic combustion, and this situation was mainly caused by the confinement of Pt nanoparticles in Ce-MOFs, which was related to the chemical state of Pt species, redox ability, and the amount of active oxygen species. Among them, the Pt@CeO2-R catalyst owns more Ce3+ species, rich Pt4+ species, and abundant active oxygen species due to the existence of confined structure, which were conducive to promote catalytic oxidation of toluene. In addition, the Pt@CeO2-R catalyst also exhibited more redox ability, which may speed up the catalytic reaction rates. On the contrary, the Pt/CeO2-R catalyst was synthesized through a simple impregnation method, and exhibited the poor activity for toluene catalytic combustion due to poor Pt4+ species and active oxygen species. Therefore, this work provides a feasible experimental basis for the study of different morphologies and encapsulated metal particles.

X-ray diffraction for probing free energy profiles and self-diffusivity of gases in metal–organic frameworks

This paper presents a novel methodology for measuring the free energy profiles and the self-diffusivity of gases in crystalline microporous materials.

Tailored metal–organic tetrahedral nanocages with aggregation-induced emission for an anti-counterfeiting ink and stimulus-responsive luminescence

Tailored metal–organic tetrahedral nanocages with aggregation-induced emission for an anti-counterfeiting ink and stimulus-responsive luminescence.

An approach for the pore-centred description of adsorption in hierarchical porous materials

Analysis of metal–organic frameworks featuring hierarchical pore systems is presented and leveraged to understand adsorption in unique pore structures.

Correlation between the Metal and Organic Components, Structure Property, and Gas-Adsorption Capacity of Metal-Organic Frameworks

Metal-organic frameworks (MOFs) are materials in which metals and organic compounds form crystalline and porous structures. Previous studies have investigated the relationships between the structure properties and physical properties of MOFs through molecular simulations, but the overall relationships in MOFs, including the relationships between the metals and organic components and the experimentally measured physical properties, have not been clarified. In this study, we developed two regression models between three elements in MOFs: the components, structure properties, and gas-adsorption capacities as physical properties. Using a nonlinear regression analysis method, we succeeded in predicting the structure properties from the components and the physical properties from the structure properties.

Defects Formation and Amorphization of Zn-MOF-74 Crystals by Post-Synthetic Interactions with Bidentate Adsorbates

The controlled introduction of defects into MOFs is a powerful strategy to induce new physiochemical properties and improve their performance for target applications. Herein, we present a new strategy for defect formation and amorphization of the canonical MOF-74 frameworks based on fine-tuning of adsorbate-framework interactions in the metal congener, hence introducing structural defects. Specifically, we demonstrate that controlled interactions between the MOF and bidentate ligands adsorbed in the pores initiates defect formation and eventual amorphization of the crystal. These structural features unlock properties that are otherwise absent in the ordered framework, such as broad-band fluorescence. The ability to introduce defects by adsorbate-framework interactions, coupled with the inherent tunability and modularity of these structures, provides a new route for the synthesis of diverse heterogeneous and hybrid materials.

Physicochemical Understanding of the Impact of Pore Environment and Species of Adsorbates on Adsorption Behaviour

For a better design of adsorbents, it is important to know the intermolecular interaction among adsorbates and host material, leading to improved guest selectivity and uptake capacity. In this study, we demonstrate the influence of the interaction among adsorbates and substrate, controlled by the pore environment and species of adsorbates, on the adsorption behaviour. We report the unique CO₂ adsorption behaviour of MOF-205 due to distinct pore geometry. The precise analysis through gas-adsorption crystallography with molecular simulation shows that capillary condensation of CO₂ in MOF-205 occurs preferentially in the large dodecahedral pore rather than the small tetrahedral pore, because the interaction of CO₂ with MOF-205 framework is weaker than that among CO₂ molecules, while Ar and N₂ are sequentially filled into two different pores of MOF-205 according to their size. Comparison of the materials with different pore environments reveals that the relative strength of the adsorbate-adsorbate and adsorbate-substrate interaction gives rise to different shapes of isotherms.

Sensitive fluorescence and visual detection of organophosphorus pesticides with a Ru(bpy)32+-ZIF-90-MnO2 sensing platform

Fluorescence sensing organophosphorus pesticides (OPs) is of great importance for both food safety and global environment; however, the reported fluorescent probes are usually directly exposed to the external environment, resulting in premature leakage or photobleaching and thus limiting their photostability and assay sensitivity. In this work, a fluorescent sensing platform consisting of a novel luminescent metal-organic framework (Ru(bpy)₃²⁺-ZIF-90) and manganese dioxide nanosheets (MnO₂ NSs) was prepared for sensing OPs. Due to the protection and improvement in the fluorescence of Ru(bpy)₃²⁺ by ZIF-90, the Ru(bpy)₃²⁺-ZIF-90 probe displayed remarkable photostability and high stability in water. By virtue of the high stability of Ru(bpy)₃²⁺-ZIF-90, as well as the outstanding fluorescence quenching and notable recognition ability of the MnO₂ NSs, this sensing platform provided excellent detection capability for parathion-methyl, with a wide concentration range of 0.050-60 ng mL^-1 and a low detection limit of 0.037 ng mL^-1. Additionally, the system exhibited a visual color change with the concentration of the OPs under sunlight. Moreover, satisfactory recoveries ranging from 93.3% to 103.6% were obtained for the real samples. The results indicated that the Ru(bpy)₃²⁺-ZIF-90-MnO₂-based OP sensing platform is promising for applications in food safety and environmental monitoring.

Molecular Surgery at Microporous MOF for Mesopore Generation and Renovation

Hierarchically porous MOFs (HP-MOFs) present advantageous synergism of micro- and mesopore but challenging in synthetic control at molecular scale. Herein, we present the first example of reversible and controllable mesopore generation and renovation in a microporous MOF of HKUST-1 via synthetic manipulation at molecular scale. An ammonia-gas etching strategy is proposed to create mesopores in carboxylate-based microporous MOFs and thus produce HP-MOFs. Gas-phase etching ensures uniform mesopore formation inside the MOF crystals via plane-oriented cutting the carboxylate-metal bonds off without affecting the crystal size and morphology. The mesopore size is controlled by the etching temperature, while the mesopore volume could be tuned by adjusting etchant pressure. The generated mesopores could be renovated using MOF precursors solutions so that to achieve controllable mesopore generation/closure, and encapsulation of the adsorbed molecules. This work demonstrates a powerful protocol for precisely tailoring and tuning the properties of MOF materials at molecular scale.

What Lies beneath a Metal-Organic Framework Crystal Structure? New Design Principles from Unexpected Behaviors

The rational design principles established for metal-organic frameworks (MOFs) allow clear structure-property relationships, fueling expansive growth for energy storage and conversion, catalysis, and beyond. However, these design principles are based on the assumption of compositional and structural rigidity, as measured crystallographically. Such idealization of MOF structures overlooks subtle chemical aspects that can lead to departures from structure-based chemical intuition. In this Perspective, we identify unexpected behavior of MOFs through literature examples. Based on this analysis, we conclude that departures from ideality are not uncommon. Whereas linker topology and metal coordination geometry are useful starting points for understanding MOF properties, we anticipate that deviations from the idealized crystal representation will be necessary to explain important and unexpected behaviors. Although this realization reinforces the notion that MOFs are highly complex materials, it should also stimulate a broader reexamination of the literature to identify corollaries to existing design rules and reveal new structure-property relationships.

A post-synthetically modified metal–organic framework for copper catalyzed denitrative C–N coupling of nitroarenes under heterogeneous conditions

Post-synthesis modification of DMOF, afforded a desired material for strategic infusion of catalytically active centers in a porous matrix. The catalyst is capable for denitrative C–N coupling reactions of nitroarenes under heterogeneous conditions.

Elucidating pore chemistry within metal–organic frameworks via single crystal X-ray diffraction; from fundamental understanding to application

The application of metal–organic frameworks (MOFs) to diverse chemical sectors is aided by their crystallinity, which permits the use of X-ray crystallography to characterise their pore chemistry and provides invaluable insight into their properties.

Guest-Controlled Incommensurate Modulation in a Meta-Rigid Metal-Organic Framework Material

Structural transitions of host systems in response to guest binding dominate many chemical processes. We report an unprecedented type of structural flexibility within a meta-rigid material, MFM-520, which exhibits a reversible periodic-to-aperiodic structural transition resulting from a drastic distortion of a [ZnO₄N] node controlled by the specific host-guest interactions. The aperiodic crystal structure of MFM-520 has no three-dimensional (3D) lattice periodicity but shows translational symmetry in higher-dimensional (3 + 2)D space. We have directly visualized the aperiodic state which is induced by incommensurate modulation of the periodic framework of MFM-520·H₂O upon dehydration to give MFM-520. Filling MFM-520 with CO₂ and SO₂ reveals that, while CO₂ has a minimal structural influence, SO₂ can further modulate the structure incommensurately. MFM-520 shows exceptional selectivity for SO₂ under flue-gas desulfurization conditions, and the facile release of captured SO₂ from MFM-520 enabled the conversion to valuable sulfonamide products. MFM-520 can thus be used as a highly efficient capture and delivery system for SO₂.

Diatomite-Metal-Organic Framework Composite with Hierarchical Pore Structures for Adsorption/Desorption of Hydrogen, Carbon Dioxide and Water Vapor

Distinctive Cr-MOF@Da composites have been constructed using chromium-based metal-organic frameworks (MOFs) and diatomite (Da). The new materials have hierarchical pore structures containing micropores, mesopores and macropores. We have synthesized various morphologies of the MOF compound Cr-MIL-101 to combine with Da in a one-pot reaction step. These distinctive hierarchical pore networks within Cr-MIL-101@Da enable exceptional adsorptive performance for a range of molecules, including hydrogen (H₂), carbon dioxide (CO₂) and water (H₂O) vapor. Selectivity for H₂ or CO₂ can be moderated by the morphology and composition of the Cr-MIL-101 included in the Cr-MOF@Da composite. The encapsulation and growth of Cr-MIL-101 within and on Da have resulted in excellent water retention as well as high thermal and hydrolytic stability. In some cases, Cr-MIL-101@Da composite materials have demonstrated increased thermal stability compared with that of Cr-MIL-101; for example, decomposition temperatures >340 ℃ can be achieved. Furthermore, these Cr-MIL-101@Da composites retain structural and morphological integrity after 60 cycles of repeated hydration/dehydration, and after storage for more than one year. These characteristics are difficult to achieve with many MOF materials, and thus suggest that MOF–mineral composites show high potential for practical gas storage and water vapor capture.

Thermally Activated Adsorption in Metal-Organic Frameworks with a Temperature-Tunable Diffusion Barrier Layer

Modification of the external surfaces of metal-organic frameworks offers a new level of control over their adsorption behavior. It was previously shown that capping of MOFs with ethylenediamine (EDA) can effectively retain small gaseous molecules at room temperature. Reported here is a temperature-induced variation in the capping-layer gate-opening mechanism through a combination of in situ infared experiments and ab initio simulations of the capping layer. An atypical acceleration and increase in the loading of weakly adsorbed molecules upon raising the temperature above room temperature is observed. These findings show the discovery of novel temperature-dependent kinetics that goes beyond standard kinetics and suggest a new avenue for tailoring selective adsorption by thermally tuning the surface barrier.