Gram-scale synthesis of two-dimensional polymer crystals and their structure analysis by X-ray diffraction

One-Pot Synthesis of Tridentate Bicyclocalixarene Cage Molecules

Efficient one-pot synthesis of tridentate bicyclocalixarenes was developed by condensing phloroglucinol with dechlorinated pyrimidine or triazine with a yield up to 58%. These cage-like molecules adopt a symmetric three-blade propeller structure with different terminal function groups and arm spans ranging from 7.5 to 15.8 Å. Due to the 1,3-alternate configuration of intermediate heterocalixarenes, the cage molecules can be prepared only with benzene rings as the upper and lower caps. They will be an ideal scaffold for the preparation of ultrathin two-dimensional materials.

Fluorescence-switching 2-D sheet structure formed by self-assembly of cruciform aromatic amphiphiles

We report that aromatic amphiphiles based on cruciform aromatic segments self-assemble into 2-D sheet structures in aqueous environments. Notably, the aromatic amphiphile based on a pyrene unit generates fluorescence-switching 2-D sheet structures. In a pH-neutral condition, the sheets show strong excimer emission. However, upon lowering the pH the excimer emission is quenched due to loosely-packed pyrene units. Subsequent return of pH to a neutral condition leads to full recovery of the excimer emission, indicative of fully-reversible fluorescence emission switching.

Crystallization-Induced Dimerization and Solution-Phase Bond Dissociation of Stable Dibenzoolympicenyl Radicals

Crystallization of organic materials can lead to different assembly structure with different reactivity, but this phenomenon is rarely observed for delocalized hydrocarbon radicals. This report introduces a crystallization-induced radical-radical coupling reaction, which employs a series of stable nonplanar organic π-radicals as reactants. Six stable radical congeners are synthesized, resulting in radical-radical coupling at the allenyl radical site during crystallization to produce close-shell dimers. This coupling reaction is absent in the solution phase, which highlights the importance of preorganization in the lattice. Remarkably, the attempts of cocrystallization of different congeners yielded homocoupling products instead of cross-coupling products. In specific cases, two distinct polymorphs are observed and their reactivity is different according to the distance of the reaction sites. Theoretical calculations indicate that the transition from a metastable preorganized monomer to a dimer is barrierless and spontaneous. The dimer could regenerate free radicals by heating or photoirradiation in the solution phase. This discovery may lead to controllable molecular switches.

Covalent Organic Frameworks for Green Energy: Synthesis, Properties, and Applications

Covalent organic frameworks (COFs) are a new type of porous organic crystalline material, which have become an emerging platform for promoting the development of green energy technology due to their high surface area, adjustable pores, low skeleton density, and easy functionalization. In recent years, with the continuous advancement of synthesis technology, the synthesis efficiency and sustainability of COFs have been significantly improved, from traditional solvothermal methods to the emergence of various green synthesis strategies such as ion thermal, mechanochemical, and ultrasound assisted methods. This article reviews the main synthesis methods of COFs and explores their applications in the field of green energy, such as photocatalysis, gas adsorption and separation, electrocatalysis, battery, supercapacitor and Proton exchange membrane fuel cell. By analyzing the performance and mechanism of COFs in these applications in detail, this article further looks forward to the challenges and future development trends faced by COFs in green energy technology, aiming to provide valuable reference and inspiration for researchers in related fields.

Advances in synthetic strategies for two-dimensional conjugated polymers

Two-dimensional conjugated polymers (2D CPs) are typically represented by 2D conjugated covalent organic frameworks (COFs) that consist of covalently cross-linked linear conjugated polymers, which possess extended in-plane π-conjugation and out-of-plane electronic couplings. The precise incorporation of molecular building blocks into ordered polymer frameworks through (semi)reversible 2D polycondensation methodologies enables the synthesis of novel polymer semiconductors with designable and predictable properties for various (opto)electronic, spintronic, photocatalytic, and electrochemical applications. Linkage chemistry lays the foundation for this class of synthetic materials and provides a library for subsequent investigations. In this review, we summarize recent advances in synthetic strategies for 2D CPs. By exploring synthetic approaches and the intricate interplay between chemical structure, the efficiency of 2D conjugation, and related physicochemical properties, we are expected to guide readers with a general background in synthetic chemistry and those actively involved in electronic device research. Furthermore, the discussion will appeal to researchers intrigued by the prospect of uncovering novel physical phenomena or mechanisms inherent in these emerging polymer semiconductors. Finally, future research directions and perspectives of highly crystalline and processable 2D CPs for electronics and other cutting-edge fields are discussed.

Mechanically interlocked two-dimensional polymers

Mechanical bonds arise between molecules that contain interlocked subunits, such as one macrocycle threaded through another. Within polymers, these linkages will confer distinctive mechanical properties and other emergent behaviors, but polymerizations that form mechanical bonds efficiently and use simple monomeric building blocks are rare. In this work, we introduce a solid-state polymerization in which one monomer infiltrates crystals of another to form a macrocycle and mechanical bond at each repeat unit of a two-dimensional (2D) polymer. This mechanically interlocked 2D polymer is formed as a layered solid that is readily exfoliated in common organic solvents, enabling spectroscopic characterization and atomic-resolution imaging using advanced electron microscopy techniques. The 2D mechanically interlocked polymer is easily prepared on multigram scales, which, along with its solution processibility, enables the facile fabrication of composite fibers with Ultem that exhibit enhanced stiffness and strength.

Crystal Lattice Analysis for 2D Nanomorphology Prediction of Phase-Separated Materials

Spontaneous phase separation of materials is a powerful strategy to generate highly defined 2D nanomorphologies with novel properties and functions. Exemplary are such morphologies in block copolymers or amphiphilic systems, whose formation can be well predicted based on parameters such as volume fraction and shape factor. In contrast, the formation of 2D nanomorphologies is currently unpredictable in materials perfectly defined at the molecular level, in which crystallinity plays a significant role. Here, we introduce a crystal lattice analysis to predict a priori the formation of 2D nanomorphologies from the crystalline units in phase-separated soft materials. We show that the formation of lamellar morphologies, their domain spacings, and thermal transition temperatures of such materials can be predicted using a straightforward crystal lattice analysis workflow. We envision this approach to facilitate the design and discovery of new materials with 2D nanomorphologies that are essential for next-generation electronic applications.

Self-Activated Energy Release Cascade from Anthracene-Based Solid-State Molecular Solar Thermal Energy Storage Systems

We introduce donor-acceptor substituted anthracenes as effective molecular solar thermal energy storage compounds that operate exclusively in the solid state. The donor-acceptor anthracenes undergo visible light-induced [4+4] cycloaddition reaction, producing metastable cycloadducts, dianthracenes with quaternary carbons, and storing photon energy. The triggered cycloreversion of dianthracenes to anthracenes discharges the stored energy as heat in the order of 100 kJ/mol (200 J/g). The series of compounds displays remarkable self-heating, or cascading heat release, upon the initial triggering. Such self-activated energy release is enabled by the large energy storage in dianthracenes, low activation energy for their thermal reversion, and effective heat transfer to unreacted molecules in the solid state. This process mirroring the self-ignition of fossil fuels opens up opportunities to use dianthracenes as effective and renewable solid-state fuels that can release energy rapidly and completely upon initial activation.

Large Molecular Rotation in Crystal Changes the Course of a Topochemical Diels-Alder Reaction from a Predicted Polymerization to an Unexpected Intramolecular Cyclization

A designed anthracene-based monomer for topochemical Diels-Alder cycloaddition polymerization crystallized with head-to-tail arrangement of molecules, as revealed by single-crystal X-ray diffraction (SCXRD) analysis. The diene and dienophile units of adjacent monomer molecules are aligned at an average distance of 4.6 Å, suggesting a favorable crystalline arrangement for their intermolecular Diels-Alder cycloaddition reaction to form a linear polymer. Surprisingly, heating the monomer crystals at a temperature above 125 °C resulted in the formation of intramolecular Diels-Alder cycloadduct, which could be characterized by various spectroscopy and SCXRD analysis. Various time-dependent studies such as NMR, PXRD, and DSC, studies established that the reaction followed topochemical pathway. Schmidt's topochemical postulates are generally used to predict the topochemical reactivity and product, by analyzing the crystal structure of the reactant. Though the crystal arrangement predicted polymerization, upon heating, the molecule avoided this pathway by undergoing a large rotation to form an intramolecular cycloadduct. Theoretical calculations supported the feasibility of the rotation, exploiting the flexibility of the molecule and voids present. These findings caution that the reliance on Schmidt's criteria for topochemical reactions may sometimes be misleading, especially in heat-induced reactions.

Emerging solid-state cycloaddition chemistry for molecular solar thermal energy storage

Recently discovered designs of solid-state molecular solar thermal energy storage systems are illustrated, including alkenes, imines, and anthracenes that undergo reversible [2 + 2] and [4 + 4] photocycloadditions for photon energy storage and release. The energy storage densities of various molecular designs, from 6 kJ mol-1 to 146 kJ mol-1 (or up to 318 J g-1), are compared and summarized, along with effective strategies for engineering their crystal packing structures that facilitate solid-state reactions. Many promising molecular scaffolds introduced here highlight the potential for achieving successful solid-state solar energy storage, guiding further discoveries and the development of new molecular systems for applications in solid-state solar thermal batteries.

Supramolecular scaffold-directed two-dimensional assembly of pentacene into a configuration to facilitate singlet fission

Molecular assemblies featuring two-dimensionality have attracted increasing attention, whereas such structures are difficult to construct simply relying on spontaneous molecular assembly. Here, we present two-dimensional assemblies of acene chromophores achieved using a tripodal triptycene supramolecular scaffold, which have been shown to exhibit a strong ability to assemble molecular and polymer motifs two-dimensionally. We designed pentacene and anthracene derivatives sandwiched by two triptycene units. These compounds assemble into expected two-dimensional structures, with the pentacene chromophores having both sufficient overlap to cause singlet fission and space for conformational change to facilitate the dissociation of a triplet pair into free triplets, which is not the case for the anthracene analog. Detailed spectroscopic analysis revealed that the pentacene chromophore in the assembly undergoes singlet fission with a quantum yield of 88 ± 5%, giving rise to triplet pairs, from which free triplets are efficiently generated (ΦT = 130 ± 8.8%). This demonstrates the utility of the triptycene-based scaffold to design functional π-electronic molecular assemblies.

Photodimerization-Triggered Photopolymerization of Triene Coordination Polymers Enables Macroscopic Photomechanical Movements

Controlling the packing of olefinic molecules in crystals is essential for triggering solid-state [2 + 2] photocycloaddition reactions and the synthesis of photocontrolled smart materials. Herein, we report the stepwise photodimerization-triggered photopolymerization of two triene coordination polymers (CPs), {[Zn(2-BBA)2(tpeb)]·0.5CH3CN}n (1, 2-HBBA = 2-bromobenzoic acid, tpeb = 1,3,5-tri-4-pyridyl-1,2-ethenylbenzene) and {[Zn(3-BBA)2(tpeb)]·CH3CN)}n (2, 3-HBBA = 3-bromobenzoic acid). Upon irradiation with 420 nm light, each pair of closely packed and parallel olefinic bonds in 1 undergoes a [2 + 2] cycloaddition reaction, which connects two adjacent Z-shaped chains into a ladder-like coordination chain [Zn(2-BBA)2(bpbdpvpcb)0.5]n (1a, bpbdpvpcb = 1,3-bis(4-pyridyl)-2,4-bis(3,5-di(2-(4-pyridyl)vinyl)phenyl]cyclobutene) through single-crystal to single-crystal (SCSC) transformation. After photodimerization from 1 to 1a has occurred, the olefinic bonds that were initially distant are brought in close enough proximity to meet the requirements for a subsequent [2 + 2] cycloaddition reaction. Upon further light irradiation, the neighboring bpbdpvpcb ligands in 1a experience a SCSC photopolymerization based on [2 + 2] photocycloaddition and transform into poly-3b,4,5,5a,8b,9,10a-octahydro-4,5,9,10-tetrapyridyl-2,7-di(2-(4-pyridyl)vinyl)dicyclobuta[e,l]-pyren (poly-otpdpvdcbp). 2 showed similar structural changes under UV light illumination. Under light exposure, single crystals of 1 and 2 with different morphologies exhibit bending, cracking, and jumping photomechanical motions. The composite film (1-PVA) engineered by dispersing crystalline particles of 1 in poly(vinyl alcohol) (PVA) displays interesting light-wavelength-dependent photomechanical motions and can perform photodriven swimming on a liquid surface. This work provides a useful and promising approach to enable photodimerization of those photoinactive olefin pairs embedded in CPs and opens a new route to synthesize organic polymers by using olefinic CP platforms.

Hierarchical single-crystal-to-single-crystal transformations of a monomer to a 1D-polymer and then to a 2D-polymer

Designing and synthesizing flawless two-dimensional polymers (2D-Ps) via meticulous molecular preorganization presents an intriguing yet challenging frontier in research. We report here the single-crystal-to-single-crystal (SCSC) synthesis of a 2D-P via thermally induced topochemical azide-alkyne cycloaddition (TAAC) reaction. A designed monomer incorporating two azide and two alkyne units is synthesized. The azide and alkyne groups are preorganized in the monomer crystal in reactive geometries for polymerizations in two orthogonal directions. On heating, the polymerizations proceed in a hierarchical manner; at first, the monomer reacts regiospecifically in a SCSC fashion to form a 1,5-triazolyl-linked 1D polymer (1D-P), which upon further heating undergoes another SCSC polymerization to a 2D-P through a second regiospecific TAAC reaction forming 1,4-triazolyl-linkages. Two different linkages in orthogonal directions make this an architecturally attractive 2D-P, as determined, at atomic resolution, by single-crystal X-ray diffraction. The 2D-P reported here is thermally stable in view of the robust triazole-linkages and can be exfoliated as 2D-sheets.

Structure Evolution of 2D Covalent Organic Frameworks Unveiled by Single-Crystal X-ray Diffraction

We report 9 crystal structures of a two-dimensional (2D) covalent organic framework (COF), including the parent Py-1P, 5 derivatives formed by chemical reactions, and 3 dynamic states by solvent exchange/loss. Structure details of these porous crystals, including stacking mode, interlayer distance, pore aperture, and incline angle, before, during, and after conversion processes in solution, were unveiled by single-crystal X-ray diffraction with resolutions up to 0.85 Å. The structure evolution is triggered by stepwise conformational transformation of the molecular building blocks in 2D COF, while their long-range ordering remained unsacrificed.

Template-Directed In Crystallo Photopolymerization of a Donor-Acceptor Cyclopropane: When Everything Falls into Place!

A single-crystal-to-single-crystal solid-state reaction of vinylogous donor-acceptor cyclopropanes is documented. The enantiospecific synthesis of new products, distinct from those obtained in solution, is achieved for the target compounds. Photopolymerization occurred upon X-ray exposure to the crystals. Notably, in one case, this reactivity exhibits selectivity since an ordered arrangement of polymers and unreacted cocrystallized monomeric conformers has been observed. Structural characterization of the complete transformation monitored through single-crystal X-ray diffraction and supported by molecular dynamics simulations sheds light on the subtle role of crystal packing in the reaction process. Moreover, the X-ray diffraction (XRD)-resolved structure of a donor-acceptor cyclopropane intermediate reveals an elongation in bond length that corroborates the existence of the so-called "push-pull effect".

New Advances in Covalent Network Polymers via Dynamic Covalent Chemistry

Covalent network polymers, as materials composed of atoms interconnected by covalent bonds in a continuous network, are known for their thermal and chemical stability. Over the past two decades, these materials have undergone significant transformations, gaining properties such as malleability, environmental responsiveness, recyclability, crystallinity, and customizable porosity, enabled by the development and integration of dynamic covalent chemistry (DCvC). In this review, we explore the innovative realm of covalent network polymers by focusing on the recent advances achieved through the application of DCvC. We start by examining the history and fundamental principles of DCvC, detailing its inception and core concepts and noting its key role in reversible covalent bond formation. Then the reprocessability of covalent network polymers enabled by DCvC is thoroughly discussed, starting from the significant milestones that marked the evolution of these polymers and progressing to their current trends and applications. The influence of DCvC on the crystallinity of covalent network polymers is then reviewed, covering their bond diversity, synthesis techniques, and functionalities. In the concluding section, we address the current challenges faced in the field of covalent network polymers and speculates on potential future directions.

Single-Crystal-to-Single-Crystal Photosynthesis of Supramolecular Organoboron Polymers with Dynamic Effects

The solid-state synthesis of single-crystalline organic polymers, having functional properties, remains an attractive and developing research area in polymer chemistry and materials science. However, light-triggered topochemical synthesis of crystalline polymers comprising an organoboron backbone has not yet been reported. Here, we describe an intriguing example of single-crystal-to-single-crystal (SCSC) rapid photosynthesis (occurs on a seconds-scale) of two structurally different linear organoboron polymers, driven by environmentally sustainable visible/sun light, obtained from the same monomer molecule. A newly designed Lewis acid-base type molecular B ← N organoboron adduct (consisting of an organoboron core and naphthylvinylpyridine ligands) crystallizes in two solid-state forms featuring the same chemical structure but different 3D structural topologies, namely, monomers 1 and 2. The solvate molecule-free crystals of 1 undergo topochemical photopolymerization via an unusual olefin-naphthyl ring [2 + 2] cyclization to yield the single crystalline [3]-ladderane polymer 1P growing along the B ← N linkages, accompanied by instantaneous and violent macroscopic mechanical motions or photosalient effects (such as bending-reshaping and jumping motions). In contrast, visible light-harvesting single crystals of 2 quantitatively polymerize to a B ← N bond-stabilized polymer 2P in a SCSC fashion owing to the rapid [2 + 2] cycloaddition reaction among olefin double bonds. Such olefin bonds in the crystals of 2 are suitably preorganized for photoreaction due to the presence of solvate molecules in the crystal packing. Single crystals of 2 also show photodynamic jumping motions - in response to visible light but in a relatively slower fashion than the crystals of 1. In addition to SCSC topochemical polymerization and dynamic motions, both monomer crystals and their single-crystalline polymers feature green emissive and short-lived room-temperature phosphorescence properties upon excitation with visible-light wavelength.

Topochemistry for Difficult Peptide-Polymer Synthesis: Single-Crystal-to-Single-Crystal Synthesis of an Isoleucine-Based Polymer, a Hydrophobic Coating Material

Polymers of hydrophobic amino acids are predicted to be potential coating materials for the creation of hydrophobic surfaces. The oligopeptides of hydrophobic amino acids are called "difficult peptides"; as the name suggests, it is difficult to synthesize them by conventional methods. We circumvented this synthetic challenge by adopting topochemical azide-alkyne cycloaddition (TAAC) polymerization of a hydrophobic dipeptide monomer. We designed an Ile-based dipeptide, decorated with azide and alkyne, which arrange in the crystal in a head-to-tail fashion with the azide and alkyne of the adjacent molecules in a ready-to-react orientation. The monomer, on mild heating of its crystals, undergoes regiospecific TAAC polymerization to yield a 1,4-disubstituted-triazole-linked polymer in a single-crystal-to-single-crystal fashion. The solid obtained after evaporation of the monomer solution also maintained crystallinity and underwent regiospecific topochemical polymerization as in the case of crystals. This topochemical polymerization could be studied using different techniques such as FTIR, NMR, DSC, GPC, MALDI, PXRD, and SCXRD. Since the polymer is insoluble in common solvents and hence difficult to coat surfaces, the monomer was first sprayed and evaporated on various surfaces and polymerized on the surface. Such polymer-coated surfaces exhibited water contact angles of up to 134°, showing that this Ile-derived polymer is very hydrophobic and can potentially be used as a coating material for various applications.

Massive Molecular Motion in Crystal Leads to an Unexpected Helical Covalent Polymer in a Solid-state Polymerization

We designed a proline-derived monomer with azide and alkene functional groups to enable topochemical ene-azide cycloaddition (TEAC) polymerization. In its crystal, the monomer forms supramolecular helices along the 'a' axis through various non-covalent interactions. Along the 'c' axis, the molecules arrange themselves head-to-tail in a wave-like pattern, positioning the azide and alkene groups of adjacent molecules in close proximity and anti-parallel orientation, complying with Schmidt's criteria for topochemical reaction. This prearranged configuration was expected to facilitate smooth topochemical polymerization, resulting in a 1,4-triazoline-linked polymer. Upon heating, the monomer underwent TEAC polymerization in a remarkable single-crystal-to-single-crystal fashion, but, to our surprise, it yielded an unexpected covalent helical polymer linked by 1,5-disubstituted triazoline units. Remarkably, the crystal avoids the ready-to-react arrangement for polymerization, but connects monomer molecules within the supramolecular helix through the cycloaddition of azide and alkene groups, even though they are not in close proximity nor in the expected orientation. This unexpected path, involving a substantial 134° rotation of the alkene group, yields hitherto unknown 1,5-disubstituted triazoline product regiospecifically. This study serves as a cautionary reminder that relying solely on topochemical postulates for predicting reactivity can sometimes be misleading.

Covalent-Frameworked 2D Crown Ether with Chemical Multifunctionality

Here, we present the synthesis and characterization of a novel 2D crystalline framework, named C2O, which mainly consists of carbon and oxygen in a 2:1 molar ratio and features crown ether holes in its skeletal structure. The covalent-frameworked 2D crown ether can be synthesized on a gram-scale and exhibits fine chemical stability in various environments, including acid, base, and different organic solvents. The C2O efficiently activates KI through the strong coordination of K+ with crown ether holes in a rigid framework, which enhances the nucleophilicity of I- and significantly improves its catalytic activity for CO2 fixation with epoxides. The presence of C2O with KI results in remarkable increases in CO2 conversion from 5.7% to 99.9% and from 2.9% to 74.2% for epichlorohydrin and allyl glycidyl ether, respectively. Moreover, C2O possesses both electrophilic and nucleophilic sites at the edge of its framework, allowing for the customization of physicochemical properties by a diverse range of chemical modifications. Specifically, incorporating allyl glycidyl ether (AGE) as an electrophile or ethoxyethylamine (EEA) as a nucleophile into C2O enables the synthesis of C2O-AGE or C2O-EEA, respectively. These modified frameworks exhibit improved conversions of 97.2% and 99.9% for CO2 fixation with allyl glycidyl ether, outperforming unmodified C2O showing a conversion of 74.2%. This newly developed scalable, durable, and customizable covalent framework holds tremendous potential for the design and preparation of outstanding materials with versatile functionalities, rendering them highly attractive for a wide range of applications.

Recent advances in two-dimensional polymers: synthesis, assembly and energy-related applications

Two-dimensional polymers (2DPs) are a class of 2D crystalline polymer materials with definite structures, which have outstanding physical-chemical and electronic properties. They cleverly link organic building units through strong covalent bonds and can construct functional 2DPs through reasonable design and selection of different monomer units to meet various application requirements. As promising energy materials, 2DPs have developed rapidly in recent years. This review first introduces the basic overview of 2DPs, such as their historical development, inherent 2D characteristics and diversified topological advantages, followed by the summary of the typical 2DP synthesis methods recently (including "top-down" and "bottom-up" methods). The latest research progress in assembly and processing of 2DPs and the energy-related applications in energy storage and conversion are also discussed. Finally, we summarize and prospect the current research status, existing challenges, and future research directions of 2DPs.

Supramolecular nanosheet formation-induced photosensitisation mechanism change of Rose Bengal dye in aqueous media

Development of two-dimensional materials and exploration of their functionalities are significant challenges due to their potential. In this study, we successfully fabricated a supramolecular nanosheet composed of amphiphilic Rose Bengal dyes in an aqueous medium. Furthermore, we elucidated a distinct change in the photosensitisation mechanism induced by nanosheet formation.

Single-Crystal One-Dimensional Porous Ladder Covalent Polymers

The synthesis of single-crystal, one-dimensional (1D) polymers is of great importance but a formidable challenge. Herein, we report the synthesis of single-crystal 1D ladder polymers in solution by dynamic covalent chemistry. The three-dimensional electron diffraction technique was used to rigorously solve the structure of the crystalline polymers, unveiling that each polymer chain is connected by double covalent bridges and all polymer chains are packed in a staggered and interlaced manner by π-π stacking and hydrogen bonding interactions, making the crystalline polymers highly robust in both thermal and chemical stability. The synthesized single-crystal polymers possess permanent micropores and can efficiently remove CO2 from the C2H2/CO2 mixture to obtain high-purity C2H2, validated by dynamic breakthrough experiments. This work demonstrates the first example of constructing single-crystal 1D porous ladder polymers with double covalent bridges in solution for efficient C2H2/CO2 separation.

Single-crystal polymers (SCPs): from 1D to 3D architectures

Single-crystal polymers (SCPs) with unambiguous chemical structures at atomic-level resolutions have attracted great attention. Obtaining precise structural information of these materials is critical as it enables a deeper understanding of the potential driving forces for specific packing and long-range order, secondary interactions, and kinetic and thermodynamic factors. Such information can ultimately lead to success in controlling the synthesis or engineering of their crystal structures for targeted applications, which could have far-reaching impact. Successful synthesis of SCPs with atomic level control of the structures, especially for those with 2D and 3D architectures, is rare. In this review, we summarize the recent progress in the synthesis of SCPs, including 1D, 2D, and 3D architectures. Solution synthesis, topochemical synthesis, and extreme condition synthesis are summarized and compared. Around 70 examples of SCPs with unambiguous structure information are presented, and their synthesis methods and structural analysis are discussed. This review offers critical insights into the structure-property relationships, providing guidance for the future rational design and bottom-up synthesis of a variety of highly ordered polymers with unprecedented functions and properties.

Precision nanoengineering for functional self-assemblies across length scales

As nanotechnology continues to push the boundaries across disciplines, there is an increasing need for engineering nanomaterials with atomic-level precision for self-assembly across length scales, i.e., from the nanoscale to the macroscale. Although molecular self-assembly allows atomic precision, extending it beyond certain length scales presents a challenge. Therefore, the attention has turned to size and shape-controlled metal nanoparticles as building blocks for multifunctional colloidal self-assemblies. However, traditionally, metal nanoparticles suffer from polydispersity, uncontrolled aggregation, and inhomogeneous ligand distribution, resulting in heterogeneous end products. In this feature article, I will discuss how virus capsids provide clues for designing subunit-based, precise, efficient, and error-free self-assembly of colloidal molecules. The atomically precise nanoscale proteinic subunits of capsids display rigidity (conformational and structural) and patchy distribution of interacting sites. Recent experimental evidence suggests that atomically precise noble metal nanoclusters display an anisotropic distribution of ligands and patchy ligand bundles. This enables symmetry breaking, consequently offering a facile route for two-dimensional colloidal crystals, bilayers, and elastic monolayer membranes. Furthermore, inter-nanocluster interactions mediated via the ligand functional groups are versatile, offering routes for discrete supracolloidal capsids, composite cages, toroids, and macroscopic hierarchically porous frameworks. Therefore, engineered nanoparticles with atomically precise structures have the potential to overcome the limitations of molecular self-assembly and large colloidal particles. Self-assembly allows the emergence of new optical properties, mechanical strength, photothermal stability, catalytic efficiency, quantum yield, and biological properties. The self-assembled structures allow reproducible optoelectronic properties, mechanical performance, and accurate sensing. More importantly, the intrinsic properties of individual nanoclusters are retained across length scales. The atomically precise nanoparticles offer enormous potential for next-generation functional materials, optoelectronics, precision sensors, and photonic devices.

Elucidation of Substituent-Responsive Reactivities via Hierarchical and Asymmetric Assemblies in Crystalline p-Quinodimethane Derivatives

We propose a mechanism for substituent-responsive reactivities of p-quinodimethane derivatives with four ester groups through their hierarchical and asymmetric assembly modes. Four asymmetric 7,8,8-tris(methoxycarbonyl)-p-quinodimethanes with a 7-positioned ethoxycarbonyl (2 a(H)), 2'-fluoroethoxycarbonyl (2 b(F)), 2'-chloroethoxycarbonyl (2 c(Cl)), or 2'-bromoethoxycarbonyl (2 d(Br)) were synthesized and crystallized. 2 a(H), 2 b(F) and 2 d(Br) afforded only one shape crystal, while 2 c(Cl) did two polymorphic 2 c(Cl)-α and 2 c(Cl)-β. UV-irradiation induced topochemical polymerization for 2 a(H), no reactions for 2 b(F) and 2 c(Cl)-α, and [6+6] photocycloaddition dimerization for 2 c(Cl)-β and 2 d(Br). Such substituent-responsive reactivities and crystal structures were compared with those of the known symmetric 7,7,8,8-tetrakis(alkoxycarbonyl)-p-quinodimethanes such as 7,7,8,8-tetrakis(methoxycarbonyl)- (1 a(Me)-α and 1 a(Me)-β), 7,7,8,8-tetrakis(ethoxycarbonyl)- (1 b(Et)), and 7,7,8,8-tetrakis(bromoethoxycarbonyl)- (1 c(BrEt)). The comparative study clarified that the reactivities and crystal structures are classified into four types that link to each other. This linkage is understandable when we analyze the crystal structures through the following hierarchical and asymmetric assemblies; conformers, dimers, one dimensional (1D)-columns, two dimensional (2D)-sheets, and three dimensional (3D)-stacked sheets (3D-crystals). This supramolecular viewpoint is supported by intermolecular interaction energies among neighbored molecules with the density functional theory (DFT) calculation. Such research enables us to elucidate the substituent-responsive reactivities of the crystals, and reminds us of the selection of the right path in a so-called "maze game".

ZnO tetrapod morphology influence on UV sensing properties

The aim of this work was to investigate how ZnO tetrapod (ZnO-T) morphology, structure, and surface charge properties (i.e. Debye length) influence their UV sensing properties, shedding light on the underlying photoresponse mechanisms. ZnO-Ts were synthesized and centrifuged to obtain three different fractions with tuned morphology, which were characterized by scanning electron microscopy, transmission electron microscopy, and high-resolution transmission electron microscopy microscopies, x-ray diffraction analysis, Brunauer-Emmett-Teller measurements, FTIR and UV-vis spectroscopies. ZnO-T UV sensors were fabricated and tested comparing among ZnO-T fractions and commercial ZnO nanoparticles. ZnO-T photoresponse was mostly influenced by ZnO-T leg diameter, with the optimal value close to the double Debye length. We also demonstrated how fractionating ZnO-Ts for morphology optimization can increased the responsivity by 2 orders of magnitude. Moreover, ZnO-T showed 3 orders of magnitude higher responsivity compared to commercial ZnO nanopowder. These results are beneficial for the engineering of efficient UV sensors and contribute to a deeper understanding the overall mechanism governing UV photoresponse.

Progress on the in situ imaging of growth dynamics of two-dimensional materials

One key issue to promote the industrialization of two-dimensional (2D) materials is to grow high-quality and large-scale 2D materials. Investigations of the growth mechanism and growth dynamics are of fundamental importance for the growth of 2D material, in which in situ imaging is highly needed. By applying different in situ imaging techniques, details for growth process, including nucleation and morphology evolution, can be obtained. This review summarizes the recent progress on the in situ imaging of 2D material growth, in which the growth rate, kink dynamics, domain coalescence, growth across the substrate steps, single-atom catalysis, and intermediates have been revealed.

Single-Crystal 2D Covalent Organic Frameworks for Plant Biotechnology

Molecules chemically synthesized as periodic two-dimensional (2D) frameworks via covalent bonds can form some of the highest-surface area and -charge density particles possible. There is significant potential for applications such as nanocarriers in life sciences if biocompatibility can be achieved; however, significant synthetic challenges remain in avoiding kinetic traps from disordered linking during 2D polymerization of compatible monomers, resulting in isotropic polycrystals without a long-range order. Here, we establish thermodynamic control over dynamic control on the 2D polymerization process of biocompatible imine monomers by minimizing the surface energy of nuclei. As a result, polycrystal, mesocrystal, and single-crystal 2D covalent organic frameworks (COFs) are obtained. We achieve COF single crystals by exfoliation and minification methods, forming high-surface area nanoflakes that can be dispersed in aqueous medium with biocompatible cationic polymers. We find that these 2D COF nanoflakes with high surface area are excellent plant cell nanocarriers that can load bioactive cargos, such as the plant hormone abscisic acid (ABA) via electrostatic attraction, and deliver them into the cytoplasm of intact living plants, traversing through the cell wall and cell membrane due to their 2D geometry. This synthetic route to high-surface area COF nanoflakes has promise for life science applications including plant biotechnology.

Rational design and topochemical synthesis of polymorphs of a polymer

Packing a polymer in different ways can give polymorphs of the polymer having different properties. β-Turn forming peptides such as 2-aminoisobutyric acid (Aib)-rich peptides adopt several conformations by varying the dihedral angles. Aiming at this, a β-turn-forming peptide monomer would give different polymorphs and these polymorphs upon topochemical polymerization would yield polymorphs of the polymer, we designed an Aib-rich monomer N3-(Aib)3-NHCH2-C[triple bond, length as m-dash]CH. This monomer crystallizes as two polymorphs and one hydrate. In all forms, the peptide adopts β-turn conformations and arranges in a head-to-tail manner with their azide and alkyne units proximally placed in a ready-to-react alignment. On heating, both the polymorphs undergo topochemical azide-alkyne cycloaddition polymerization. Polymorph I polymerized in a single-crystal-to-single-crystal (SCSC) fashion and the single-crystal X-ray diffraction analysis of the polymer revealed its screw-sense reversing helical structure. Polymorph II maintains its crystallinity during polymerization but gradually becomes amorphous upon storage. The hydrate III undergoes a dehydrative transition to polymorph II. Nanoindentation studies revealed that different polymorphs of the monomer and the corresponding polymers exhibited different mechanical properties, in accordance with their crystal packing. This work demonstrates the promising future of the marriage of polymorphism and topochemistry for obtaining polymorphs of polymers.

Crystalline Unipolymer Monolayer with High Modulus and Conductivity

The synthesis of crystalline polymer with a well-defined orientated state and a two-dimensional crystalline size beyond a micrometer will be essential to achieve the highest physical feature of polymer material but remain challenging. Herein, we show the synthesis of the crystalline unipolymer monolayer with an unusual ultrahigh modulus that is higher than the ITO substrate and high conductance by simultaneous electrosynthesis and manipulation. We find that the polymer monolayer has fully extended in the vertical and unidirectional orientation, which is proposed to approach their theoretically highest density, modulus, and conductivity among all aggregation formations of the current polymer. The modulus and current density can reach 40 and 1000 times higher than their amorphous counterpart. It is also found that these monolayers exhibit the bias- and length-dependent multiple charge states and asymmetrically negative differential resistance (NDR) effect, indicating that this unique molecular tailoring and ordering design is promising for multilevel resistive memory devices. Our work demonstrates the creation of a crystalline polymer monolayer for approaching the physical limit of polymer electronic materials and also provides an opportunity to challenge the synthetically iterative limit of an isolated ultra-long polymer.

Environmentally sustainable implementations of two-dimensional nanomaterials

Rapid advancement in nanotechnology has led to the development of a myriad of useful nanomaterials that have novel characteristics resulting from their small size and engineered properties. In particular, two-dimensional (2D) materials have become a major focus in material science and chemistry research worldwide with substantial efforts centered on their synthesis, property characterization, and technological, and environmental applications. Environmental applications of these nanomaterials include but are not limited to adsorbents for wastewater and drinking water treatment, membranes for desalination, and coating materials for filtration. However, it is also important to address the environmental interactions and implications of these nanomaterials in order to develop strategies that minimize their environmental and public health risks. Towards this end, this review covers the most recent literature on the environmental implementations of emerging 2D nanomaterials, thereby providing insights into the future of this fast-evolving field including strategies for ensuring sustainable development of 2D nanomaterials.

Side‐Chain Control of Topochemical Polymer Single Crystals with Tunable Elastic Modulus

Topochemical polymerizations hold the promise of producing high molecular weight and stereoregular single crystalline polymers by first aligning monomers before polymerization. However, monomer modifications often alter the crystal packing and result in non-reactive polymorphs. Here, we report a systematic study on the side chain functionalization of the bis(indandione) derivative system that can be polymerized under visible light. Precisely engineered side chains help organize the monomer crystals in a one-dimensional fashion to maintain the topochemical reactivity. By optimizing the side chain length and end group of monomers, the elastic modulus of the resulting polymer single crystals can also be greatly enhanced. Lastly, using ultrasonication, insoluble polymer single crystals can be processed into free-standing and robust polymer thin films. This work provides new insights on the molecular design of topochemical reactions and paves the way for future applications of this fascinating family of materials.

Scalable Synthesis and Characterization of Multilayer γ-Graphyne, New Carbon Crystals with a Small Direct Band Gap

γ-Graphyne is the most symmetric sp²/sp¹ allotrope of carbon, which can be viewed as graphene uniformly expanded through the insertion of two-carbon acetylenic units between all the aromatic rings. To date, synthesis of bulk γ-graphyne has remained a challenge. We here report the synthesis of multilayer γ-graphyne through crystallization-assisted irreversible cross-coupling polymerization. A comprehensive characterization of this new carbon phase is described, including synchrotron powder X-ray diffraction, electron diffraction, lateral force microscopy, Raman spectroscopy, infrared spectroscopy, and cyclic voltammetry. Experiments indicate that γ-graphyne is a 0.48 eV band gap semiconductor, with a hexagonal a-axis spacing of 6.88 Å and an interlayer spacing of 3.48 Å, which is consistent with theoretical predictions. The observed crystal structure has an aperiodic sheet stacking. The material is thermally stable up to 240 °C but undergoes transformation at higher temperatures. While conventional 2D polymerization and reticular chemistry rely on error correction through reversibility, we demonstrate that a periodic covalent lattice can be synthesized under purely kinetic control. The reported methodology is scalable and inspires extension to other allotropes of the graphyne family.

Spotting Trends in Organocatalyzed and Other Organomediated (De)polymerizations and Polymer Functionalizations

Organocatalysis has evolved into an effective complement to metal- or enzyme-based catalysis in polymerization, polymer functionalization, and depolymerization. The ease of removal and greater sustainability of organocatalysts relative to transition-metal-based ones has spurred development in specialty applications, e.g., medical devices, drug delivery, optoelectronics. Despite this, the use of organocatalysis and other organomediated reactions in polymer chemistry is still rapidly developing, and we envisage their rapidly growing application in nascent areas such as controlled radical polymerization, additive manufacturing, and chemical recycling in the coming years. In this Review, we describe ten trending areas where we anticipate paradigm shifts resulting from novel organocatalysts and other transition-metal-free conditions. We highlight opportunities and challenges and detail how new discoveries could lead to previously inaccessible functional materials and a potentially circular plastics economy.

Circularly Recyclable Polymers Featuring Topochemically Weakened Carbon-Carbon Bonds

Closed-loop circular utilization of plastics is of manifold significance, yet energy-intensive and poorly selective scission of the ubiquitous carbon-carbon (C-C) bonds in contemporary commercial polymers pose tremendous challenges to envisioned recycling and upcycling scenarios. Here, we demonstrate a topochemical approach for creating elongated C-C bonds with a bond length of 1.57∼1.63 Å between repeating units in the solid state with decreased bond dissociation energies. Elongated bonds were introduced between the repeating units of 12 distinct polymers from three classes. In all cases, the materials exhibit rapid depolymerization via breakage of the elongated bond within a desirable temperature range (140∼260 °C) while otherwise remaining remarkably stable under harsh conditions. Furthermore, the topochemically prepared polymers are processable and 3D-printable while maintaining a high depolymerization yield and tunable mechanical properties. These results suggest that the crystalline polymers synthesized from simple photochemistry and without expensive catalysts are promising for practical applications with complete materials' circularity.

Single-crystal-to-single-crystal translation of a helical supramolecular polymer to a helical covalent polymer

Polymers possessing helical conformation in the solid state are in high demand. We report a helical peptide-polymer via the topochemical ene-azide cycloaddition (TEAC) polymerization. The molecules of the designed Gly-Phe-based dipeptide, decorated with ene and azide, assemble in its crystals as β-sheets and as supramolecular helices in two mutually perpendicular directions. While the NH…O H-bonding facilitates β-sheet-like stacking along one direction, weak CH…N H-bonding between the azide-nitrogen and vinylic-hydrogen of molecules belonging to the adjacent stacks arranges them in a head-to-tail manner as supramolecular helices. In the crystal lattice, the azide and alkene of adjacent molecules in the supramolecular helix are suitably preorganized for their TEAC reaction. The dipeptide underwent regio- and stereospecific polymerization upon mild heating in a single-crystal-to-single-crystal fashion, yielding a triazoline-linked helical covalent polymer that could be characterized by single-crystal X-ray diffraction studies. Upon heating, the triazoline-linked polymer undergoes denitrogenation to aziridine-linked polymer, as evidenced by differential scanning calorimetry, thermogravimetric analysis, and solid-state NMR analyses.

Landscaping Covalent Organic Framework Nanomorphologies

The practical utilization of covalent organic frameworks (COFs) with manipulation at the atomic and molecular scale often demands their assembly on the nano-, meso-, and macroscale with precise control. Consequently, synthetic approaches that establish the ability to control the nucleation and growth of COF crystallites and their self-assembly to desired COF nanomorphologies have drawn substantial attention from researchers. On the basis of the dimensionality of the COF morphologies, we can categorize them into zero- (0-D), one- (1-D), two- (2-D), and three-dimensional (3-D) nanomorphologies. In this perspective, we summarize the reported synthetic strategies that enable precise control of the COF nanomorphologies' size, shape, and dimensionality and reveal the impact of the dimensionalities in their physicochemical properties and applications. The aim is to establish a synergistic optimization of the morphological dimensionality while keeping the micro- or mesoporosity, crystallinity, and chemical functionalities of the COFs in perspective. A detailed knowledge along the way should help us to enrich the performance of COFs in a variety of applications like catalysis, separation, sensing, drug delivery, energy storage, etc. We have discussed the interlinking between the COF nanomorphologies via the transmutation of the dimensionalities. Such dimensionality transmutation could lead to variation in their properties during the transition. Finally, the concept of constructing COF superstructures through the combination of two or more COF nanomorphologies has been explored, and it could bring up opportunities for developing next-generation innovative materials for multidisciplinary applications.

Structural Phase Transitions in Anthracene Crystals

Anthracene (C14 H10 ) and its derivatives, π-conjugated molecules in acenes, have been widely researched in terms of their reactions, physical properties, and self-assembly (or crystal engineering). These molecules can be functionalized to tune reactivities, optoelectronic properties, and self-assembling abilities. Structural changes in the molecular assemblies, solid states, and crystals have recently been discovered. Therefore, a systematic discussion of anthracene's molecular structure, packing, and optical properties based on its intermolecular structure and phase transitions is important for future chemical and structural design. In the present review, we discuss anthracene's molecular design, dimer packing, and crystal structure, focusing on the structural phase transitions of its crystals. We also provide examples of the phase transitions of anthracene crystals. Changes to edge-to-face of CH-π interaction and face-to-face packing of π-π interaction affect the thermodynamic stabilities of various crystal structures. These structures can inform the prediction of structural and physical properties.

Single Molecular Layer of Chitin Sub-Nanometric Nanoribbons: One-Pot Self-Exfoliation and Crystalline Assembly into Robust, Sustainable, and Moldable Structural Materials

Sub-nanometric materials (SNMs) represent a series of unprecedented size-/morphology-related properties applicable in theoretical research and diverse cutting-edge applications. However, in-depth investigation and wide utilization of organic SNMs are frequently hindered, owing to the complex synthesis procedures, insufficient colloidal stability, poor processability, and high cost. In this work, a low-cost, energy-efficient, convenient, effective, and scalable method is demonstrated for directly exfoliating chitin SNMs from their natural sources through a one-pot "tandem molecular intercalation" process. The resultant solution-like sample, which exhibits ribbon-like feature and contains more than 85% of the single molecular layer (thickness <0.6 nm), is capable of being solution-processed to different types of materials. Thanks to the sub-nanometric size and rich surface functional groups, chitin SNMs reveal versatile intriguing properties that rarely observe in their nano-counterparts (nanofibrils), e.g., crystallization-like assembly in the colloidal state and alcoplasticity/self-adhesiveness in the bulk aggregate state. The finding in this work not only opens a new avenue for the high value-added utilization of chitin, but also provides a new platform for both the theoretical study and practical applications of organic SNMs.

Reconstructed covalent organic frameworks

Covalent organic frameworks (COFs) are distinguished from other organic polymers by their crystallinity^1-3, but it remains challenging to obtain robust, highly crystalline COFs because the framework-forming reactions are poorly reversible^4,5. More reversible chemistry can improve crystallinity^6-9, but this typically yields COFs with poor physicochemical stability and limited application scope⁵. Here we report a general and scalable protocol to prepare robust, highly crystalline imine COFs, based on an unexpected framework reconstruction. In contrast to standard approaches in which monomers are initially randomly aligned, our method involves the pre-organization of monomers using a reversible and removable covalent tether, followed by confined polymerization. This reconstruction route produces reconstructed COFs with greatly enhanced crystallinity and much higher porosity by means of a simple vacuum-free synthetic procedure. The increased crystallinity in the reconstructed COFs improves charge carrier transport, leading to sacrificial photocatalytic hydrogen evolution rates of up to 27.98 mmol h^-1 g^-1. This nanoconfinement-assisted reconstruction strategy is a step towards programming function in organic materials through atomistic structural control.

Selective and Cooperative Photocycloadditions within Multistranded Aromatic Sheets

A series of aromatic helix-sheet-helix oligoamide foldamers composed of several different photosensitive diazaanthracene units have been designed and synthesized. Molecular objects up to 7 kDa were straightforwardly produced on a 100 mg scale. Nuclear magnetic resonance and crystallographic investigations revealed that helix-sheet-helix architectures can adopt one or two distinct conformations. Sequences composed of an even number of turn units were found to fold in a canonical symmetrical conformation with two helices of identical handedness stacked above and below the sheet segment. Sequences composed of an odd number of turns revealed a coexistence between a canonical fold with helices of opposite handedness and an alternate fold with a twist within the sheet and two helices of identical handedness. The proportions between these species could be manipulated, in some cases quantitatively, being dependent on solvent, temperature, and absolute control of helix handedness. Diazaanthracene units were shown to display distinct reactivity toward [4 + 4] photocycloadditions according to the substituent in position 9. Their organization within the sequences was programmed to allow photoreactions to take place in a specific order. Reaction pathways and kinetics were deciphered and product characterized, demonstrating the possibility to orchestrate successive photoreactions so as to avoid orphan units or to deliberately produce orphan units at precise locations. Strong cooperative effects were observed in which the photoreaction rate was influenced by the presence (or absence) of photoadducts in the structure. Multiple photoreactions within the aromatic sheet eventually lead to structure lengthening and stiffening, locking conformational equilibria. Photoproducts could be thermally reverted.

Observing polymerization in 2D dynamic covalent polymers

The quality of crystalline two-dimensional (2D) polymers^1-6 is intimately related to the elusive polymerization and crystallization processes. Understanding the mechanism of such processes at the (sub)molecular level is crucial to improve predictive synthesis and to tailor material properties for applications in catalysis^7-10 and (opto)electronics^11,12, among others^13-18. We characterize a model boroxine 2D dynamic covalent polymer, by using in situ scanning tunnelling microscopy, to unveil both qualitative and quantitative details of the nucleation-elongation processes in real time and under ambient conditions. Sequential data analysis enables observation of the amorphous-to-crystalline transition, the time-dependent evolution of nuclei, the existence of 'non-classical' crystallization pathways and, importantly, the experimental determination of essential crystallization parameters with excellent accuracy, including critical nucleus size, nucleation rate and growth rate. The experimental data have been further rationalized by atomistic computer models, which, taken together, provide a detailed picture of the dynamic on-surface polymerization process. Furthermore, we show how 2D crystal growth can be affected by abnormal grain growth. This finding provides support for the use of abnormal grain growth (a typical phenomenon in metallic and ceramic systems) to convert a polycrystalline structure into a single crystal in organic and 2D material systems.