High yield and ultrafast sources of electrically triggered entangled-photon pairs based on strain-tunable quantum dots

Quantum dots get a bright upgrade

Developing a bright, deterministic source of entangled photon pairs has been an outstanding scientific and technological challenge. Semiconductor quantum dots are a promising candidate for this task. A new device combining a circular Bragg resonator and a piezoelectric actuator achieves high brightness and entanglement fidelity simultaneously, overcoming previous limitations. This breakthrough enhances quantum dot applications in entanglement-based quantum communication protocols.

Unveiling the 3D Morphology of Epitaxial GaAs/AlGaAs Quantum Dots

Strain-free GaAs/AlGaAs semiconductor quantum dots (QDs) grown by droplet etching and nanohole infilling (DENI) are highly promising candidates for the on-demand generation of indistinguishable and entangled photon sources. The spectroscopic fingerprint and quantum optical properties of QDs are significantly influenced by their morphology. The effects of nanohole geometry and infilled material on the exciton binding energies and fine structure splitting are well-understood. However, a comprehensive understanding of GaAs/AlGaAs QD morphology remains elusive. To address this, we employ high-resolution scanning transmission electron microscopy (STEM) and reverse engineering through selective chemical etching and atomic force microscopy (AFM). Cross-sectional STEM of uncapped QDs reveals an inverted conical nanohole with Al-rich sidewalls and defect-free interfaces. Subsequent selective chemical etching and AFM measurements further reveal asymmetries in element distribution. This study enhances the understanding of DENI QD morphology and provides a fundamental three-dimensional structural model for simulating and optimizing their optoelectronic properties.

Wavelength-tunable high-fidelity entangled photon sources enabled by dual Stark effects

The construction of a large-scale quantum internet requires quantum repeaters containing multiple entangled photon sources with identical wavelengths. Semiconductor quantum dots can generate entangled photon pairs deterministically with high fidelity. However, realizing wavelength-matched quantum-dot entangled photon sources faces two difficulties: the non-uniformity of emission wavelength and exciton fine-structure splitting induced fidelity reduction. Typically, these two factors are not independently tunable, making it challenging to achieve simultaneous improvement. In this work, we demonstrate wavelength-tunable entangled photon sources based on droplet-etched GaAs quantum dots through the combined use of AC and quantum-confined Stark effects. The emission wavelength can be tuned by ~1 meV while preserving an entanglement fidelity f exceeding 0.955(1) in the entire tuning range. Based on this hybrid tuning scheme, we finally demonstrate multiple wavelength-matched entangled photon sources with f > 0.919(3), paving the way towards robust and scalable on-demand entangled photon sources for quantum internet and integrated quantum optical circuits.

Enhancement of Single-Photon Purity and Coherence of III-Nitride Quantum Dot with Polarization-Controlled Quasi-Resonant Excitation

III-Nitride semiconductor-based quantum dots (QDs) play an essential role in solid-state quantum light sources because of their potential for room-temperature operation. However, undesired background emission from the surroundings deteriorates single-photon purity. Moreover, spectral diffusion causes inhomogeneous broadening and limits the applications of QDs in quantum photonic technologies. To overcome these obstacles, it is demonstrated that directly pumping carriers to the excited state of the QD reduces the number of carriers generated in the vicinities. The polarization-controlled quasi-resonant excitation is applied to InGaN QDs embedded in GaN nanowire. To analyze the different excitation mechanisms, polarization-resolved absorptions are investigated under the above-barrier bandgap, below-barrier bandgap, and quasi-resonant excitation conditions. By employing polarization-controlled quasi-resonant excitation, the linewidth is reduced from 353 to 272 µeV, and the second-order correlation value is improved from 0.470 to 0.231. Therefore, a greater single-photon purity can be obtained at higher temperatures due to decreased linewidth and background emission.

On-chip scalable highly pure and indistinguishable single-photon sources in ordered arrays: Path to quantum optical circuits

Realization of quantum optical circuits is at the heart of quantum photonic information processing. A long-standing obstacle, however, has been the absence of a suitable platform of single photon sources (SPSs). Such SPSs need to be in spatially ordered arrays and produce, on-demand, highly pure, and indistinguishable single photons with sufficiently uniform emission characteristics to enable controlled interference between photons from distinct sources underpinning functional quantum optical networks. We report on such a platform of SPSs based on a unique class of epitaxial quantum dots dubbed mesa-top single quantum dot. Under resonant excitation, the spatially ordered SPSs (without Purcell enhancement) show single photon purity of >99% [g(2)(0) ~ 0.015], high two-photon Hong-Ou-Mandel interference visibilities of 0.82 ± 0.03 (at 11.5 kelvin, without cavity), and spectral nonuniformity of <3 nanometers, within established locally tunable technology. Our platform of SPSs paves the path to creating on-chip scalable quantum photonic networks for communication, computation, simulation, sensing and imaging.

Generation of Polarization-Entangled Photons from Self-Assembled Quantum Dots in a Hybrid Quantum Photonic Chip

Integration of entangled photon sources in a quantum photonic chip has enabled the most envisioned quantum photonic technologies to be performed in a compact platform with enhanced complexity and stability as compared to bulk optics. However, the technology to generate entangled photon states in a quantum photonic chip that are neither probabilistic nor restricted to low efficiency is still missing. Here, we introduce a hybrid quantum photonic chip where waveguide-coupled self-assembled quantum dots (QDs) are heterogeneously integrated onto a piezoelectric actuator. By exerting an anisotropic stress, we experimentally show that the fine structure splitting of waveguide-coupled quantum dots can be effectively eliminated. This allows for the demonstration of chip-integrated self-assembled QDs for generating and routing polarization-entangled photon pairs. Our results presented here would open up an avenue for implementing on-demand quantum information processing in a quantum photonic chip by employing all-solid-state self-assembled quantum dot emitters.

Optical Quality of InAs/InP Quantum Dots on Distributed Bragg Reflector Emitting at 3rd Telecom Window Grown by Molecular Beam Epitaxy

We present an experimental study on the optical quality of InAs/InP quantum dots (QDs). Investigated structures have application relevance due to emission in the 3rd telecommunication window. The nanostructures are grown by ripening-assisted molecular beam epitaxy. This leads to their unique properties, i.e., low spatial density and in-plane shape symmetry. These are advantageous for non-classical light generation for quantum technologies applications. As a measure of the internal quantum efficiency, the discrepancy between calculated and experimentally determined photon extraction efficiency is used. The investigated nanostructures exhibit close to ideal emission efficiency proving their high structural quality. The thermal stability of emission is investigated by means of microphotoluminescence. This allows to determine the maximal operation temperature of the device and reveal the main emission quenching channels. Emission quenching is predominantly caused by the transition of holes and electrons to higher QD's levels. Additionally, these carriers could further leave the confinement potential via the dense ladder of QD states. Single QD emission is observed up to temperatures of about 100 K, comparable to the best results obtained for epitaxial QDs in this spectral range. The fundamental limit for the emission rate is the excitation radiative lifetime, which spreads from below 0.5 to almost 1.9 ns (GHz operation) without any clear spectral dispersion. Furthermore, carrier dynamics is also determined using time-correlated single-photon counting.

Nanoscale Focus Pinspot for High-Purity Quantum Emitters via Focused-Ion-Beam-Induced Luminescence Quenching

Epitaxially grown quantum dots (QDs), especially embedded in photonic structures, play an essential role in various quantum photonic systems as on-demand single-photon sources. However, these QDs often suffer from adjacent unwanted emitters, which contribute to the background noise of the QD emission and fundamentally limit the single-photon purity. In this paper, a nanoscale focus pinspot (NFP) technique using focused-ion-beam-induced luminescence quenching enables us to improve single-photon purity from site-controlled QD as a proof-of-concept experiment. The optical quality of the QD emission is not degraded while the signal-to-noise ratio of the QD is improved. Moreover, the QD after the NFP technique reveals the single-photon nature at further elevated temperatures owing to the reduced background noise. As the NFP technique is nondestructive, it retains the apparent physical structures and photonic functions, thereby indicating its promising potential for applying diverse high-purity quantum emitters, particularly integrated in photonic devices and circuits.

1GHz clocked distribution of electrically generated entangled photon pairs

Quantum networks are essential for realising distributed quantum computation and quantum communication. Entangled photons are a key resource, with applications such as quantum key distribution, quantum relays, and quantum repeaters. All components integrated in a quantum network must be synchronised and therefore comply with a certain clock frequency. In quantum key distribution, the most mature technology, clock rates have reached and exceeded 1GHz. Here we show the first electrically pulsed sub-Poissonian entangled photon source compatible with existing fiber networks operating at this clock rate. The entangled LED is based on InAs/InP quantum dots emitting in the main telecom window, with a multi-photon probability of less than 10% per emission cycle and a maximum entanglement fidelity of 89%. We use this device to demonstrate GHz clocked distribution of entangled qubits over an installed fiber network between two points 4.6km apart.

Electrically driven source of time-energy entangled photons based on a self-pumped silicon microring resonator

Time-energy entangled photon pairs are fundamental resources for quantum communication protocols since they are robust against environmental fluctuations in optical fiber networks. Pair sources based on spontaneous four-wave mixing in silicon microring resonators usually employ expensive external tunable lasers to compensate for ambient fluctuations; adopting self-pumped configurations, instead, lifts the need for such external source. Here we demonstrate the emission of time-energy entangled photon pairs at telecom wavelengths from a silicon self-pumped ring, obtaining a Franson interference fringe with 93.9%±0.9% visibility.

Advanced technologies for quantum photonic devices based on epitaxial quantum dots

Quantum photonic devices are candidates for realizing practical quantum computers and networks. The development of integrated quantum photonic devices can greatly benefit from the ability to incorporate different types of materials with complementary, superior optical or electrical properties on a single chip. Semiconductor quantum dots (QDs) serve as a core element in the emerging modern photonic quantum technologies by allowing on-demand generation of single-photons and entangled photon pairs. During each excitation cycle, there is one and only one emitted photon or photon pair. QD photonic devices are on the verge of unfolding for advanced quantum technology applications. In this review, we focus on the latest significant progress of QD photonic devices. We first discuss advanced technologies in QD growth, with special attention to droplet epitaxy and site-controlled QDs. Then we overview the wavelength engineering of QDs via strain tuning and quantum frequency conversion techniques. We extend our discussion to advanced optical excitation techniques recently developed for achieving the desired emission properties of QDs. Finally, the advances in heterogeneous integration of active quantum light-emitting devices and passive integrated photonic circuits are reviewed, in the context of realizing scalable quantum information processing chips.

GaAs Quantum Dot in a Parabolic Microcavity Tuned to 87Rb D1

We develop a structure to efficiently extract photons emitted by a GaAs quantum dot tuned to rubidium. For this, we employ a broadband microcavity with a curved gold backside mirror that we fabricate by a combination of photoresist reflow, dry reactive ion etching in an inductively coupled plasma, and selective wet chemical etching. Precise reflow and etching control allows us to achieve a parabolic backside mirror with a short focal distance of 265 nm. The fabricated structures yield a predicted (measured) collection efficiency of 63% (12%), an improvement by more than 1 order of magnitude compared to unprocessed samples. We then integrate our quantum dot parabolic microcavities onto a piezoelectric substrate capable of inducing a large in-plane biaxial strain. With this approach, we tune the emission wavelength by 0.5 nm/kV, in a dynamic, reversible, and linear way, to the rubidium D1 line (795 nm).

Strain-induced control of a pillar cavity-GaAs single quantum dot photon source

Herein, we present the calculated strain-induced control of single GaAs/AlGaAs quantum dots (QDs) integrated into semiconductor micropillar cavities. We show precise energy control of individual single GaAs QD excitons under multi-modal stress fields of tailored micropillar optomechanical resonators. Further, using a three-dimensional envelope-function model, we evaluated the quantum mechanical correction in the QD band structures depending on their geometrical shape asymmetries and, more interestingly, on the practical degree of Al interdiffusion. Our theoretical calculations provide the practical quantum error margins, obtained by evaluating Al-interdiffused QDs that were engineered through a front-edge droplet epitaxy technique, for tuning engineered QD single-photon sources, facilitating a scalable on-chip integration of QD entangled photons.

Resolving the temporal evolution of line broadening in single quantum emitters

Light emission from solid-state quantum emitters is inherently prone to environmental decoherence, which results in a line broadening and in the deterioration of photon indistinguishability. Here we employ photon correlation Fourier spectroscopy (PCFS) to study the temporal evolution of such a broadening in two prominent systems: GaAs and In(Ga)As quantum dots. Differently from previous experiments, the emitters are driven with short laser pulses as required for the generation of high-purity single photons, the time scales we probe range from a few nanoseconds to milliseconds and, simultaneously, the spectral resolution we achieve can be as small as ∼ 2µeV. We find pronounced differences in the temporal evolution of different optical transition lines, which we attribute to differences in their homogeneous linewidth and sensitivity to charge noise. We analyze the effect of irradiation with additional white light, which reduces blinking at the cost of enhanced charge noise. Due to its robustness against experimental imperfections and its high temporal resolution and bandwidth, PCFS outperforms established spectroscopy techniques, such as Michelson interferometry. We discuss its practical implementation and the possibility to use it to estimate the indistinguishability of consecutively emitted single photons for applications in quantum communication and photonic-based quantum information processing.

Strain-Tunable Single Photon Sources in WSe2 Monolayers

The appearance of single photon sources in atomically thin semiconductors holds great promises for the development of a flexible and ultracompact quantum technology in which elastic strain engineering can be used to tailor their emission properties. Here, we show a compact and hybrid two-dimensional semiconductor-piezoelectric device that allows for controlling the energy of single photons emitted by quantum emitters localized in wrinkled WSe₂ monolayers. We demonstrate that strain fields exerted by the piezoelectric device can be used to tune the energy of localized excitons in WSe₂ up to 18 meV in a reversible manner while leaving the single photon purity unaffected over a wide range. Interestingly, we find that the magnitude and, in particular, the sign of the energy shift as a function of stress is emitter dependent. With the help of finite element simulations we suggest a simple model that explains our experimental observations and, furthermore, discloses that the type of strain (tensile or compressive) experienced by the quantum emitters strongly depends on their localization across the wrinkles. Our findings are of strong relevance for the practical implementation of single photon devices based on two-dimensional materials as well as for understanding the effects of strain on their emission properties.

Slow and fast single photons from a quantum dot interacting with the excited state hyperfine structure of the Cesium D1-line

Hybrid interfaces between distinct quantum systems play a major role in the implementation of quantum networks. Quantum states have to be stored in memories to synchronize the photon arrival times for entanglement swapping by projective measurements in quantum repeaters or for entanglement purification. Here, we analyze the distortion of a single-photon wave packet propagating through a dispersive and absorptive medium with high spectral resolution. Single photons are generated from a single In(Ga)As quantum dot with its excitonic transition precisely set relative to the Cesium D₁ transition. The delay of spectral components of the single-photon wave packet with almost Fourier-limited width is investigated in detail with a 200 MHz narrow-band monolithic Fabry-Pérot resonator. Reflecting the excited state hyperfine structure of Cesium, “slow light” and “fast light” behavior is observed. As a step towards room-temperature alkali vapor memories, quantum dot photons are delayed for 5 ns by strong dispersion between the two 1.17 GHz hyperfine-split excited state transitions. Based on optical pumping on the hyperfine-split ground states, we propose a simple, all-optically controllable delay for synchronization of heralded narrow-band photons in a quantum network.

Electronic and Optical Properties of 2D Materials Constructed from Light Atoms

Boron, carbon, nitrogen, and oxygen atoms can form various building blocks for further construction of structurally well-defined 2D materials (2DMs). Both in theory and experiment, it has been documented that the electronic structures and optical properties of 2DMs are well tunable through a rational design of the material structure. Here, the recent progress on 2DMs that are composed of B, C, N, and O elements is introduced, including borophene, graphene, h-BN, g-C₃ N₄ , organic 2D polymers (2DPs), etc. Attention is put on the band structure/bandgap engineering for these materials through a variety of methodologies, such as chemical modifications, layer number and atomic structure control, change of conjugation degree, etc. The optical properties, such as photoluminescence, thermoluminescence, single photon emission, as well as the associated applications in bioimaging and sensing, are discussed in detail and highlighted.

Entanglement and teleportation between polarization and wave-like encodings of an optical qubit

Light is an irreplaceable means of communication among various quantum information processing and storage devices. Due to their different physical nature, some of these devices couple more strongly to discrete, and some to continuous degrees of freedom of a quantum optical wave. It is therefore desirable to develop a technological capability to interconvert quantum information encoded in these degrees of freedom. Here we generate and characterize an entangled state between a dual-rail (polarization-encoded) single-photon qubit and a qubit encoded as a superposition of opposite-amplitude coherent states. We furthermore demonstrate the application of this state as a resource for the interfacing of quantum information between these encodings. In particular, we show teleportation of a polarization qubit onto a freely propagating continuous-variable qubit.

Post-thermal-Induced Recrystallization in GaAs/Al0.3Ga0.7As Quantum Dots Grown by Droplet Epitaxy with Near-Unity Stoichiometry

Here, we investigate the stoichiometry control of GaAs/Al0.3Ga0.7As droplet epitaxy (DE) quantum dots (QDs). Few tens of core nonstoichiometries in the Ga(As) atomic percent are revealed in as-grown "strain-free" QDs using state-of-the-art atomic-scale energy-dispersive X-ray spectroscopy based on transmission electron microscopy. Precise systematic analyses demonstrate a successful quenching of the nonstoichiometry below 2%. The control of the chemical reactions with well-controlled ex situ annealing sheds light on the engineering of a novel single-photon source of strain-free DE QDs free of defects.

Ferritin and neuromelanin "quantum dot" array structures in dopamine neurons of the substantia nigra pars compacta and norepinephrine neurons of the locus coeruleus

In this review, the author shows that ferritin has documented quantum dot material properties that have been reported in numerous independent studies, and can enable quantum mechanical electron transport over substantial distances. In addition, neuromelanin is a pi-conjugated polymer, and quantum dot/pi-conjugated polymer combinations have been reported in numerous independent studies to facilitate electron transport for solar photovoltaic and other applications. Both ferritin and neuromelanin are present in large quantities in the dopamine neurons of the substantia nigra pars compactaand the norepinephrine neurons of the locus coeruleus. The unique structure of subgroups of these neurons that have a large number of axon branches and synapses may have evolved to take advantage of this electron transport mechanism, if it is present, such as to coordinate conscious action, or for other purposes. Independent clinical and laboratory studies are also reviewed that corroborate this theory of coordinated action in these neuron groups. Research to validate the theory using charge transport measurements, materials characterization, existing fluorescent probe material and reaction time testing is proposed.

Dynamic Control of the Coupling between Dark and Bright Excitons with Vibrational Strain

We numerically and experimentally investigate strain-induced coupling between dark and bright excitons and its dynamic control using a gallium arsenide (GaAs) micromechanical resonator. Uniaxial strain induced by the mechanical resonance efficiently detunes the exciton energies and modulates the coupling strength via the deformation potential in GaAs. This allows optical access to the long-lived dark states without using any external electromagnetic field. This field-free approach could be expanded to a wide range of solid-state materials, leading to on-chip excitonic memories and circuits based on micromechanical resonators.

Ferroelectric and Piezoelectric Effects on the Optical Process in Advanced Materials and Devices

Piezoelectric and ferroelectric materials have shown great potential for control of the optical process in emerging materials. There are three ways for them to impact on the optical process in various materials. They can act as external perturbations, such as ferroelectric gating and piezoelectric strain, to tune the optical properties of the materials and devices. Second, ferroelectricity and piezoelectricity as innate attributes may exist in some optoelectronic materials, which can couple with other functional features (e.g., semiconductor transport, photoexcitation, and photovoltaics) in the materials giving rise to unprecedented device characteristics. The last way is artificially introducing optical functionalities into ferroelectric and piezoelectric materials and devices, which provides an opportunity for investigating the intriguing interplay between the parameters (e.g., electric field, temperature, and strain) and the introduced optical properties. Here, the tuning strategies, fundamental mechanisms, and recent progress in ferroelectric and piezoelectric effects modulating the optical properties of a wide spectrum of materials, including lanthanide-doped phosphors, quantum dots, 2D materials, wurtzite-type semiconductors, and hybrid perovskites, are presented. Finally, the future outlook and challenges of this exciting field are suggested.

Fabrication and Optical Properties of Strain-free Self-assembled Mesoscopic GaAs Structures

We use a combined process of Ga-assisted deoxidation and local droplet etching to fabricate unstrained mesoscopic GaAs/AlGaAs structures exhibiting a high shape anisotropy with a length up to 1.2 μm and a width of 150 nm. We demonstrate good controllability over size and morphology of the mesoscopic structures by tuning the growth parameters. Our growth method yields structures, which are coupled to a surrounding quantum well and present unique optical emission features. Microscopic and optical analysis of single structures allows us to demonstrate that single structure emission originates from two different confinement regions, which are spectrally separated and show sharp excitonic lines. Photoluminescence is detected up to room temperature making the structures the ideal candidates for strain-free light emitting/detecting devices.

High-performance semiconductor quantum-dot single-photon sources

Single photons are a fundamental element of most quantum optical technologies. The ideal single-photon source is an on-demand, deterministic, single-photon source delivering light pulses in a well-defined polarization and spatiotemporal mode, and containing exactly one photon. In addition, for many applications, there is a quantum advantage if the single photons are indistinguishable in all their degrees of freedom. Single-photon sources based on parametric down-conversion are currently used, and while excellent in many ways, scaling to large quantum optical systems remains challenging. In 2000, semiconductor quantum dots were shown to emit single photons, opening a path towards integrated single-photon sources. Here, we review the progress achieved in the past few years, and discuss remaining challenges. The latest quantum dot-based single-photon sources are edging closer to the ideal single-photon source, and have opened new possibilities for quantum technologies.

Bipolar Effects in Photovoltage of Metamorphic InAs/InGaAs/GaAs Quantum Dot Heterostructures: Characterization and Design Solutions for Light-Sensitive Devices

The bipolar effect of GaAs substrate and nearby layers on photovoltage of vertical metamorphic InAs/InGaAs in comparison with pseudomorphic (conventional) InAs/GaAs quantum dot (QD) structures were studied. Both metamorphic and pseudomorphic structures were grown by molecular beam epitaxy, using bottom contacts at either the grown n ⁺-buffers or the GaAs substrate. The features related to QDs, wetting layers, and buffers have been identified in the photoelectric spectra of both the buffer-contacted structures, whereas the spectra of substrate-contacted samples showed the additional onset attributed to EL2 defect centers. The substrate-contacted samples demonstrated bipolar photovoltage; this was suggested to take place as a result of the competition between components related to QDs and their cladding layers with the substrate-related defects and deepest grown layer. No direct substrate effects were found in the spectra of the buffer-contacted structures. However, a notable negative influence of the n ⁺-GaAs buffer layer on the photovoltage and photoconductivity signal was observed in the InAs/InGaAs structure. Analyzing the obtained results and the performed calculations, we have been able to provide insights on the design of metamorphic QD structures, which can be useful for the development of novel efficient photonic devices.

Semiconductor devices for entangled photon pair generation: a review

Entanglement is one of the most fascinating properties of quantum mechanical systems; when two particles are entangled the measurement of the properties of one of the two allows the properties of the other to be instantaneously known, whatever the distance separating them. In parallel with fundamental research on the foundations of quantum mechanics performed on complex experimental set-ups, we assist today with bourgeoning of quantum information technologies bound to exploit entanglement for a large variety of applications such as secure communications, metrology and computation. Among the different physical systems under investigation, those involving photonic components are likely to play a central role and in this context semiconductor materials exhibit a huge potential in terms of integration of several quantum components in miniature chips. In this article we review the recent progress in the development of semiconductor devices emitting entangled photons. We will present the physical processes allowing the generation of entanglement and the tools to characterize it; we will give an overview of major recent results of the last few years and highlight perspectives for future developments.

Solid-state ensemble of highly entangled photon sources at rubidium atomic transitions

Semiconductor InAs/GaAs quantum dots grown by the Stranski-Krastanov method are among the leading candidates for the deterministic generation of polarization-entangled photon pairs. Despite remarkable progress in the past 20 years, many challenges still remain for this material, such as the extremely low yield, the low degree of entanglement and the large wavelength distribution. Here, we show that with an emerging family of GaAs/AlGaAs quantum dots grown by droplet etching and nanohole infilling, it is possible to obtain a large ensemble of polarization-entangled photon emitters on a wafer without any post-growth tuning. Under pulsed resonant two-photon excitation, all measured quantum dots emit single pairs of entangled photons with ultra-high purity, high degree of entanglement and ultra-narrow wavelength distribution at rubidium transitions. Therefore, this material system is an attractive candidate for the realization of a solid-state quantum repeater-among many other key enabling quantum photonic elements.

Bright nanoscale source of deterministic entangled photon pairs violating Bell's inequality

Global, secure quantum channels will require efficient distribution of entangled photons. Long distance, low-loss interconnects can only be realized using photons as quantum information carriers. However, a quantum light source combining both high qubit fidelity and on-demand bright emission has proven elusive. Here, we show a bright photonic nanostructure generating polarization-entangled photon pairs that strongly violates Bell’s inequality. A highly symmetric InAsP quantum dot generating entangled photons is encapsulated in a tapered nanowire waveguide to ensure directional emission and efficient light extraction. We collect ~200 kHz entangled photon pairs at the first lens under 80 MHz pulsed excitation, which is a 20 times enhancement as compared to a bare quantum dot without a photonic nanostructure. The performed Bell test using the Clauser-Horne-Shimony-Holt inequality reveals a clear violation (S_CHSH > 2) by up to 9.3 standard deviations. By using a novel quasi-resonant excitation scheme at the wurtzite InP nanowire resonance to reduce multi-photon emission, the entanglement fidelity (F = 0.817 ± 0.002) is further enhanced without temporal post-selection, allowing for the violation of Bell’s inequality in the rectilinear-circular basis by 25 standard deviations. Our results on nanowire-based quantum light sources highlight their potential application in secure data communication utilizing measurement-device-independent quantum key distribution and quantum repeater protocols.

Electrically-Pumped Wavelength-Tunable GaAs Quantum Dots Interfaced with Rubidium Atoms

We demonstrate the first wavelength-tunable electrically pumped source of nonclassical light that can emit photons with wavelength in resonance with the D2 transitions of 87Rb atoms. The device is fabricated by integrating a novel GaAs single-quantum-dot light-emitting diode (LED) onto a piezoelectric actuator. By feeding the emitted photons into a 75 mm long cell containing warm 87Rb vapor, we observe slow-light with a temporal delay of up to 3.4 ns. In view of the possibility of using 87Rb atomic vapors as quantum memories, this work makes an important step toward the realization of hybrid-quantum systems for future quantum networks.

Electric-Field-Induced Energy Tuning of On-Demand Entangled-Photon Emission from Self-Assembled Quantum Dots

We explore a method to achieve electrical control over the energy of on-demand entangled-photon emission from self-assembled quantum dots (QDs). The device used in our work consists of an electrically tunable diode-like membrane integrated onto a piezoactuator, which is capable of exerting a uniaxial stress on QDs. We theoretically reveal that, through application of the quantum-confined Stark effect to QDs by a vertical electric field, the critical uniaxial stress used to eliminate the fine structure splitting of QDs can be linearly tuned. This feature allows experimental realization of a triggered source of energy-tunable entangled-photon emission. Our demonstration represents an important step toward realization of a solid-state quantum repeater using indistinguishable entangled photons in Bell state measurements.

Wavelength-tunable entangled photons from silicon-integrated III-V quantum dots

Many of the quantum information applications rely on indistinguishable sources of polarization-entangled photons. Semiconductor quantum dots are among the leading candidates for a deterministic entangled photon source; however, due to their random growth nature, it is impossible to find different quantum dots emitting entangled photons with identical wavelengths. The wavelength tunability has therefore become a fundamental requirement for a number of envisioned applications, for example, nesting different dots via the entanglement swapping and interfacing dots with cavities/atoms. Here we report the generation of wavelength-tunable entangled photons from on-chip integrated InAs/GaAs quantum dots. With a novel anisotropic strain engineering technique based on PMN-PT/silicon micro-electromechanical system, we can recover the quantum dot electronic symmetry at different exciton emission wavelengths. Together with a footprint of several hundred microns, our device facilitates the scalable integration of indistinguishable entangled photon sources on-chip, and therefore removes a major stumbling block to the quantum-dot-based solid-state quantum information platforms.