Ferromagnetic particles as magnetic resonance imaging temperature sensors

Molecular dynamics simulations of microscopic structural transition and macroscopic mechanical properties of magnetic gels

Magnetic gels with embedded micro-/nano-sized magnetic particles in cross-linked polymer networks can be actuated by external magnetic fields, with changes in their internal microscopic structures and macroscopic mechanical properties. We investigate the responses of such magnetic gels to an external magnetic field, by means of coarse-grained molecular dynamics simulations. We find that the dynamics of magnetic particles are determined by the interplay of magnetic dipole-dipole interactions, polymer elasticity, and thermal fluctuations. The corresponding microscopic structures formed by the magnetic particles, such as elongated chains, can be controlled by the external magnetic field. Furthermore, the magnetic gels can exhibit reinforced macroscopic mechanical properties, where the elastic modulus increases algebraically with the magnetic moments of the particles in the form of ∝(m-mc)2 when magnetic chains are formed. This simulation work can not only serve as a tool for studying the microscopic and the macroscopic responses of the magnetic gels, but also facilitate future fabrications and practical controls of magnetic composites with desired physical properties.

Advances in screening hyperthermic nanomedicines in 3D tumor models

Hyperthermic nanomedicines are particularly relevant for tackling human cancer, providing a valuable alternative to conventional therapeutics. The early-stage preclinical performance evaluation of such anti-cancer treatments is conventionally performed in flat 2D cell cultures that do not mimic the volumetric heat transfer occurring in human tumors. Recently, improvements in bioengineered 3D in vitro models have unlocked the opportunity to recapitulate major tumor microenvironment hallmarks and generate highly informative readouts that can contribute to accelerating the discovery and validation of efficient hyperthermic treatments. Leveraging on this, herein we aim to showcase the potential of engineered physiomimetic 3D tumor models for evaluating the preclinical efficacy of hyperthermic nanomedicines, featuring the main advantages and design considerations under diverse testing scenarios. The most recent applications of 3D tumor models for screening photo- and/or magnetic nanomedicines will be discussed, either as standalone systems or in combinatorial approaches with other anti-cancer therapeutics. We envision that breakthroughs toward developing multi-functional 3D platforms for hyperthermia onset and follow-up will contribute to a more expedited discovery of top-performing hyperthermic therapies in a preclinical setting before their in vivo screening.

Aqueous Dispersion of Manganese-Zinc Ferrite Nanoparticles Protected by PEG as a T2 MRI Temperature Contrast Agent

Mixed manganese-zinc ferrite nanoparticles coated with PEG were studied for their potential usefulness in MRI thermometry as temperature-sensitive contrast agents. Particles in the form of an 8.5 nm core coated with a 3.5 nm layer of PEG were fabricated using a newly developed, one-step method. The composition of Mn0.48Zn0.46Fe2.06O4 was found to have a strong thermal dependence of magnetization in the temperature range between 5 and 50 °C. Nanoparticles suspended in an agar gel mimicking animal tissue and showing non-significant impact on cell viability in the biological test were studied with NMR and MRI over the same temperature range. For the concentration of 0.017 mg/mL of Fe, the spin-spin relaxation time T2 increased from 3.1 to 8.3 ms, while longitudinal relaxation time T1 shows a moderate decrease from 149.0 to 125.1 ms. A temperature map of the phantom exposed to the radial temperature gradient obtained by heating it with an 808 nm laser was calculated from T2 weighted spin-echo differential MR images. Analysis of temperature maps yields thermal/spatial resolution of 3.2 °C at the distance of 2.9 mm. The experimental relaxation rate R2 data of water protons were compared with those obtained from calculations using a theoretical model incorporating the motion averaging regime.

Harmonic dependence of thermal magnetic particle imaging

Advances in instrumentation and tracer materials are still required to enable sensitive, accurate, and localized in situ 3D temperature monitoring by magnetic particle imaging (MPI). We have developed a high-resolution magnetic particle imaging instrument and implemented a low-noise multi-harmonic lock-in detection method to observe and quantify temperature variations in iron oxide nanoparticle tracers using the harmonic ratio method for determining temperature. Using isolated harmonics for MPI and temperature imaging revealed an apparent dependence of imaging resolution on harmonic number. Thus, we present experimental and simulation studies to quantify the imaging resolution dependence on temperature and harmonic number, and directly validate the fundamental origin of MPI imaging resolution on harmonic number based on the concept of a harmonic point-spread-function.

Synthesis of Manganese Zinc Ferrite Nanoparticles in Medical-Grade Silicone for MRI Applications

The aim of this project is to fabricate hydrogen-rich silicone doped with magnetic nanoparticles for use as a temperature change indicator in magnetic resonance imaging-guided (MRIg) thermal ablations. To avoid clustering, the particles of mixed MnZn ferrite were synthesized directly in a medical-grade silicone polymer solution. The particles were characterized by transmission electron microscopy, powder X-ray diffraction, soft X-ray absorption spectroscopy, vibrating sample magnetometry, temperature-dependent nuclear magnetic resonance relaxometry (20 °C to 60 °C, at 3.0 T), and magnetic resonance imaging (at 3.0 T). Synthesized nanoparticles were the size of 4.4 nm ± 2.1 nm and exhibited superparamagnetic behavior. Bulk silicone material showed a good shape stability within the study’s temperature range. Embedded nanoparticles did not influence spin–lattice relaxation, but they shorten the longer component of spin–spin nuclear relaxation times of silicone’s protons. However, these protons exhibited an extremely high r2* relaxivity (above 1200 L s−1 mmol−1) due to the presence of particles, with a moderate decrease in the magnetization with temperature. With an increased temperature decrease of r2*, this ferro–silicone can be potentially used as a temperature indicator in high-temperature MRIg ablations (40 °C to 60 °C).

Magnetic particle based MRI thermometry at 0.2 T and 3 T

This study provides insight into the advantages and disadvantages of using ferrite particles embedded in agar gel phantoms as MRI temperature indicators for low-magnetic field scanners. We compare the temperature-dependent intensity of MR images at low-field (0.2 T) to those at high-field (3.0 T). Due to a shorter T₁ relaxation time at low-fields, MRI scanners operating at 0.2 T can use shorter repetition times and achieve a significant T₂^⁎ weighting, resulting in strong temperature-dependent changes of MR image brightness in short acquisition times. Although the signal-to-noise ratio for MR images at 0.2 T MR is much lower than at 3.0 T, it is sufficient to achieve a temperature measurement uncertainty of about ±1.0 °C at 37 °C for a 90 μg/mL concentration of magnetic particles.

Plasma Surface Engineering of Natural and Sustainable Polymeric Derivatives and Their Potential Applications

Recently, natural as well as synthetic polymers have been receiving significant attention as candidates to replace non-renewable materials. With the exponential developments in the world each day, the collateral damage to the environment is incessant. Increased demands for reducing pollution and energy consumption are the driving force behind the research related to surface-modified natural fibers (NFs), polymers, and various derivatives of them such as natural-fiber-reinforced polymer composites. Natural fibers have received special attention for industrial applications due to their favorable characteristics, such as low cost, abundance, light weight, and biodegradable nature. Even though NFs offer many potential applications, they still face some challenges in terms of durability, strength, and processing. Many of these have been addressed by various surface modification methodologies and compositing with polymers. Among different surface treatment strategies, low-temperature plasma (LTP) surface treatment has recently received special attention for tailoring surface properties of different materials, including NFs and synthetic polymers, without affecting any of the bulk properties of these materials. Hence, it is very important to get an overview of the latest developments in this field. The present article attempts to give an overview of different materials such as NFs, synthetic polymers, and composites. Special attention was placed on the low-temperature plasma-based surface engineering of these materials for diverse applications, which include but are not limited to environmental remediation, packaging, biomedical devices, and sensor development.

One-Step Preparation of Highly Stable Copper-Zinc Ferrite Nanoparticles in Water Suitable for MRI Thermometry

Superparamagnetic ferrite nanoparticles coated with a polymer layer are widely used for biomedical applications. The objective of this work is to design nanoparticles as a magnetic resonance imaging (MRI) temperature-sensitive contrast agent. Copper-zinc ferrite nanoparticles coated with a poly(ethylene glycol) (PEG) layer are synthesized using a one-step thermal decomposition method in a polymer matrix. The resulting nanoparticles are stable in water and biocompatible. Using Mössbauer spectroscopy and magnetometry, it was determined that the grown nanoparticles exhibit superparamagnetic properties. Embedding these particles into an agarose gel resulted in significant modification of water proton relaxation times T 1, T 2, and T 2* determined by nuclear magnetic resonance measurements. The results of the spin-echo T 2-weighted MR images of an aqueous phantom with embedded Cu0.08Zn0.54Fe2.38O4 nanoparticles in the presence of a strong temperature gradient show a strong correlation between the temperature and the image intensity. The presented results support the hypothesis that CuZn ferrite nanoparticles can be used as a contrast agent for MRI thermometry.

Biological thermometer based on the temperature sensitivity of magnetic nanoparticle paraSHIFT

In the paper, the temperature dependence of magnetic nanoparticle (MNP) paramagnetic chemical shift (paraSHIFT) was studied by magnetic resonance (MR) spectroscopy. Based on it, iron oxide MNPs are considered as MR shifting probes for determining the temperature in liquids. With the increase in measurement temperature of the MNP reagent with MNPs, the decrease of MNP magnetization would make the peak of spectroscopy shift to the higher chemical shift area. The peak shift is related to the magnetic susceptibility of MNPs, which can be determined by MR frequency as a function of temperature and particle size. Experiments on temperature-dependent chemical shifts are performed for MNP samples with different core sizes and the estimated temperature accuracy can achieve 0.1 K. Combined with the contrast effect of magnetic nanoparticles in magnetic resonance imaging at 3 T, this technology can realize temperature imaging.

On the optimization of imaging parameters for magnetic resonance imaging thermometry using magnetic microparticles

Magnetic Resonance Imaging thermometry is an extremely useful technique which allows one to determine, noninvasively, the temperature deep in the tissue in two or three dimensions. Many methods of MR thermometry have been developed, including those that rely on the intrinsic MR properties of tissue and those which depend on the addition of contrast agents injected into the tissue to create temperature dependent MR images. One such method is to introduce magnetic particles whose magnetization's temperature dependence influences the MR properties of the surrounding tissue and obtain temperature from calibrated intensity changes of T₂* weighted MR images. One limitation of this method is the temperature resolution which is determined by the rate of change of the magnetization with temperature. One can change the MR response either through varying the particles properties or finding the MR scan parameters which maximize the image contrast due to T₂* weighting of images. In this work we calculate the MR signal strength, using known values of T₁ and T₂* relaxation times for agarose gel phantoms with embedded magnetic particles, and compared this with the temperature dependent intensity of experimental MR images. We seek to optimize the change in signal intensity with temperature by varying the selectable MR scanner parameters: echo time, repetition time, and flip angle. Based on comparison with experimental data we find that the change in signal with temperature can be significantly increased (by as much as 100%) through the appropriate choice of MR scan parameters.

Magnetic Simulations of Core-Shell Ferromagnetic Bi-Magnetic Nanoparticles: The Influence of Antiferromagnetic Interfacial Exchange

Magnetic properties of ferromagnetic nanostructures were studied by atomistic simulations following Monte Carlo and Landau-Lifshitz-Gilbert approaches. First, we investigated the influence of particle size and shape on the temperature dependence of magnetization for single cobalt and gadolinium nanoparticles and also in bi-magnetic Co@Gd core-shell nanoparticles with different sizes. The Landau-Lifshitz-Gilbert approach was subsequently applied for inspecting the magnetic hysteresis behavior of 2 and 4 nm Co@Gd core-shell nanoparticles with negative, positive, and zero values of interfacial magnetic exchange. We were able to demonstrate the influence of finite-size effect on the dependence of the Curie temperature of Co and Gd nanoparticles. In the Co@Gd core-shell framework, it was possible to handle the critical temperature of the hybrid system by adjusting the Co core size. In addition, we found an improvement in the coercive field values for a negative interfacial exchange energy and for a different core size, suggesting an exchange spring behavior, while positive and zero values of interfacial exchange constant showed no strong influence on the hysteresis behavior.

Functionalized magnetic composite nano/microfibres with highly oriented van der Waals CrI3 inclusions by electrospinning

This study reports on the synthesis of highly oriented chromium triiodide (CrI₃) magnetic inclusions inside nano/microfibres with a polyethylene oxide matrix, prepared by the electrospinning technique. The structural, microstructural and spectroscopic analysis shows uniformly dispersed CrI₃ nanosized inclusions inside the fibres, presenting a C2/m monoclinic structure at room temperature, where their c-axis is perpendicular to the fibre mat plane and the ab layers are in-plane. Analysis of the magnetic properties show that the samples have a ferromagnetic-paramagnetic phase transition at ∼55-56 K, lower than that of bulk CrI₃. Noticeably, a field-driven metamagnetic transition is observed below ∼45 K, from M versus H curves, when the applied magnetic field is perpendicular to the fibre mat plane, while it is strongly reduced when the field is in-plane. This anisotropic behaviour is attributed to the field-induced changes from antiferromagnetic to ferromagnetic interlayer magnetic moment alignment along the CrI₃ c-axis stacked layers. These CrI₃ electrospun fibres then show an efficient cost-effective route to synthesize magnetic composite fibres with highly oriented van der Walls inclusions, for spintronic applications, taking advantage of their anisotropic 2D layered materials properties.

Three-dimensional assembly and disassembly of Fe3O4-decorated porous carbon nanocomposite with enhanced transversal relaxation for magnetic resonance sensing of bisphenol A

The design and construction of a novel magnetic resonance sensor (MRS) is presented for bisphenol A (BPA) detection. The MRS has been built based on the core component of magnetic Fe₃O₄ nanoparticles (~ 40 nm), which were uniformly distributed in nanoporous carbon (abbreviated as Fe₃O₄@NPC). The synthesis was derived from the calcination of the metal organic framework (MOF) precursor of Fe-MIL-101 at high temperature. Fe₃O₄@NPC was confirmed with enhanced transversal relaxation with r₂ value of 118.2 mM^-1 s^-1, which was around 1.7 times higher than that of the naked Fe₃O₄ nanoparticle. This enhancement is attributed to the excellent proton transverse relaxation rate of Fe₃O₄@NPC caused by the reduced self-diffusion coefficient of water molecules in the vicinity of Fe₃O₄ nanoparticles in the nanoporous carbon. BPA antibody (Ab) and antigen (Ag)-ovalbumin (OVA) were immobilized onto the Fe₃O₄@NPC to form Ab-Fe₃O₄@NPC and Ag-Fe₃O₄@NPC, respectively. These two composites can cause the three-dimensional assembly of Fe₃O₄@NPC via immunological recognition. The presence of BPA can compete with antigen-OVA to combine with Ab-Fe₃O₄@NPC, thereby breaking the assembly process (disassembly). The difference in the change of the T₂ value before and after adding BPA can thus be used to monitor BPA. The proposed MRS not only revealed a wide linear range of BPA concentration from 0.05 to 50 ng mL^-1 with an extremely low detection limit of 0.012 ng mL^-1 (S/N = 3), but also displayed high selectivity towards matrix interferences. The recoveries of BPA ranged from 95.6 to 108.4% for spiked tea π, and 93.4 to 104.7% for spiked canned oranges samples, respectively, and the RSD (n = 3) was less than 4.4% for 3 successive assays. The versatility of Fe₃O₄@NPC with customized relaxation responses provides the possibility for the adaptation of magnetic resonance platforms for food safety development. The magnetic Fe3O4 nanoparticles are uniformly dispersed in the nanoporous carbon (Fe3O4@NPC), which derived from the calcinating of the metal organic framework (MOF) precursor of Fe-MIL-101. And the magnetic Fe₃O₄@NPCs are adopted for the construction of magnetic resonance sensor (MRS) for bisphenol A (BPA) detection.

Flexible CoFeB/Silk Films for Biocompatible RF/Microwave Applications

Aiming to realize the integration of signal processing with the human body, wearable and implantable radio frequency (RF)/microwave devices are rapidly developed. However, the insufficiency in skin commonality and biocompatibility brings up challenges in making such devices. In this study, an ultra-flexible and biocompatible CoFeB/silk film is developed potentially for on-skin and implantable RF/microwave applications. Moreover, the CoFeB/silk films present controllable dissolvability in aqueous solutions and exhibit great potentials in applications for environmentally friendly disposable devices. A strain-tunable bandstop filter based on the CoFeB/silk film was fabricated, which exhibited a large frequency tunability of 3 GHz and ability in monitoring the finger-joints' motions. This concept and method of combining ferromagnetic materials with the biocompatible substrate offers a novel pathway for wearable/implantable applications.

Iron oxide magnetic nanoparticles based low-field MR thermometry

This paper reports on a highly accurate approach of magnetic resonance (MR) thermometry using iron oxide magnetic nanoparticles (MNPs) as temperature sensors. An empirical model for the description of the temperature dependent R ₂ relaxation rate is proposed by taking into account the temperature sensitivity of the MNP magnetization. The temperature sensitivity of the MNP magnetization (η) and the temperature sensitivity of the R ₂ relaxation rate (κ) are simulated with the proposed empirical models to investigate their dependence on the magnetic field and the particle size. Simulation results show the existence of optimal magnetic fields H_oη and H_oκ that maximize the temperature sensitivities η and κ. Furthermore, simulations and experiments demonstrate that the optimal magnetic field H_oη (H_oκ ) decreases with increasing the particle size. Experiments on temperature dependent R ₂ relaxation rate are performed at different magnetic fields for MNP samples with different iron concentrations. Experimental results show that the proposed MR thermometry using MNPs as temperature sensors allows a temperature estimation accuracy of about 0.05 °C. We believe that the achieved approach of highly accurate MR thermometry is of great interest and significance to biomedicine and biology.

Accurate and Real-Time Temperature Monitoring during MR Imaging Guided PTT

Photothermal therapy (PTT) is an efficient approach for cancer treatment. However, accurately monitoring the spatial distribution of photothermal transducing agents (PTAs) and mapping the real-time temperature change in tumor and peritumoral normal tissue remain a huge challenge. Here, we propose an innovative strategy to integrate T₁-MRI for precisely tracking PTAs with magnetic resonance temperature imaging (MRTI) for real-time monitoring temperature change in vivo during PTT. NaBiF₄: Gd@PDA@PEG nanomaterials were synthesized with favorable T₁-weighted performance to target tumor and localize PTAs. The extremely weak susceptibility (1.04 × 10^-6 emu g^-1 Oe^1-) of NaBiF₄: Gd@PDA@PEG interferes with the local phase marginally, which maintains the capability of MRTI to dynamically record real-time temperature change in tumor and peritumoral normal tissue. The time resolution is 19 s per frame, and the detection precision of temperature change is approximately 0.1 K. The approach achieving PTT guided by multimode MRI holds significant potential for the clinical application.

AC magnetometry with active stabilization and harmonic suppression for magnetic nanoparticle spectroscopy and thermometry

Magnetic nanoparticle (MNP) thermometry based on magnetic particle spectroscopy (MPS) is explored as a potential approach for realizing in-situ temperature measurement of 3D objects. MNP thermometry relies on the nonlinear magnetization response to an AC drive field. This nonlinear response has functional dependence on frequency and temperature, governed by the complex magnetization dynamics of MNPs suspended in solution. In this work, we introduce our approach for accurate and precise AC magnetization measurements using actively stabilized drive fields ranging from DC to 10 kHz. To isolate the harmonic response of MNPs from the drive field, we also perform active cancellation to reach drive field suppression up to 120 dB. Active stabilization and cancellation are utilized for real-time, sensitive measurements of AC magnetization of commercial samples, with stability on the timescale of hours. Initial results for MNP thermometry are demonstrated using this technique, and we achieved a total temperature uncertainty of 410 mK and 170 mK at 100 ms and 10 s integration time, respectively.

One-Step Synthesis of Long Term Stable Superparamagnetic Colloid of Zinc Ferrite Nanorods in Water

Synthesis of spinel zinc ferrite ultrafine needle-like particles that exhibit exceptional stability in aqueous dispersion (without any surfactants) and superparamagnetic response is reported. Comprehensive structural and magnetic characterization of the particles is performed using X-ray and electron diffraction, small angle X-ray scattering, transmission electron microscopy, dynamic light scattering, vibrating sample magnetometry, Mössbauer spectroscopy and high-resolution X-ray spectroscopy. It reveals nearly stoichiometric ZnFe₂O₄ nanorods with mixed spinel structure and unimodal size distribution of mean length of 20 nm and diameter of 5 nm. Measurements performed in aqueous and dried form shows that particles' properties are significantly changed as a result of drying.

Spatial and Temperature Resolutions of Magnetic Nanoparticle Temperature Imaging with a Scanning Magnetic Particle Spectrometer

This paper quantitatively investigates the spatial and temperature resolutions of magnetic nanoparticle (MNP) temperature imaging with a multiline phantom filled with MNPs. The multiline phantom in total consists of seven lines with different distances between two adjacent lines. A scanning magnetic particle spectrometer is used to measure the spatial distributions of the MNP harmonics for MNP concentration and temperature imaging, whereas an iterative deconvolution method is used to improve the spatial resolution. A modulation transfer function calculated from the MNP concentration image is used to quantitatively present the spatial resolution, whereas the standard deviation of the measured temperatures is used to quantitatively present the temperature resolution. The spatial resolution is about 4 mm while the temperature resolution is about 1.0 K without deconvolution. With increasing the number of the iterative loops in the deconvolution, the spatial resolution is improved to 2 mm while the temperature resolution is worsened to about 9.6 K due to deconvolution-based oscillation.

Magnetic Phase Transition in Spark-Produced Ternary LaFeSi Nanoalloys

Using the magnetocaloric effect in nanoparticles holds great potential for efficient refrigeration and energy conversion. The most promising candidate materials for tailoring the Curie temperature to room temperature are rare-earth-based magnetic nanoalloys. However, only few high-nuclearity lanthanide/transition-metal nanoalloys have been produced so far. Here we report, for the first time, the observation of magnetic response in spark-produced LaFeSi nanoalloys. The results suggest that these nanoalloys can be used to exploit the magnetocaloric effect near room temperature; such a finding can lead to the creation of unique multicomponent materials for energy conversion, thus helping toward the realization of a sustainable energy economy.

Development of Ferrite-Based Temperature Sensors for Magnetic Resonance Imaging: A Study of Cu1-xZnxFe2O4

We investigate the use of Cu_1-x Zn _x Fe₂O₄ ferrites (0.60 < x < 0.76) as potential sensors for magnetic- resonance-imaging thermometry. Samples are prepared by a standard ceramic technique. Their structural and magnetic properties are determined using x-ray diffraction, scanning electron microscopy, super-conducting quantum-interference device magnetometry, and Mossbauer and 3-T nuclear-magnetic-resonance spectroscopies. We use the mass magnetization of powdered ferrites and transverse relaxivity r*₂ of water protons in Ringer's-solution-based agar gels with embedded micron-sized particles to determine the best composition for magnetic-resonance-imaging (MRI) temperature sensors in the (280-323)-K range. A preclinical 3-T MRI scanner is employed to acquire T*₂ weighted temperature-dependent images. The brightness of the MRI images is cross-correlated with the temperature of the phantoms, which allows for a temperature determination with approximately 1°C accuracy. We determine that the composition of 0.65 < x < 0.70 is the most suitable for MRI thermometry near human body temperature.

Plasma surface modification of polymers for sensor applications

Polymeric sensors play an increasingly important role in monitoring the environment we live in, providing relevant information for a host of applications.