Surface modification-induced phase transformation of hexagonal close-packed gold square sheets

Facile Synthesis of Rhodium-Based Nanocrystals in a Metastable Phase and Evaluation of Their Thermal and Catalytic Properties

Controlling the polymorphism of metal nanocrystals is a promising strategy for enhancing properties and discovering new phenomena. However, previous studies on Rh nanocrystals have focused on their thermodynamically stable face-centered-cubic (fcc) phase. Herein, a facile synthesis of Rh-based nanocrystals featuring the metastable hexagonal close-packed (hcp) phase is reported by using Ru seeds in their native hcp phase to template the deposition of Rh atoms. The success of such phase-controlled synthesis relies on the templating effect promoted by the small lattice mismatch between Ru and Rh and the slow dropwise titration of the precursor at an elevated temperature, ensuring the layer-by-layer growth mode and thus the formation of a conformal hcp-Rh shell. Faster injection rate of Rh(III) precursor leads to the formation of a rough Rh shell in the conventional fcc phase due to accelerated reaction kinetics. Considering both thermodynamic and kinetic aspects of this system, the hcp-Rh phase is favored when the low surface energy from smooth overlayers balances the high bulk energy of the metastable phase, achieved through tight control of reaction rates and deposition patterns. These Ruhcp@Rhhcp core-shell nanocrystals demonstrate thermal stability up to 400 °C, while exhibiting higher catalytic activity toward ethanol oxidation reaction compared to Ruhcp@Rhfcc counterparts.

Built-In Electric Field Boost Photocatalytic Degradation of Pollutants in Wastewater

The photocatalysis technique shows significant potential for wastewater degradation; however, the rapid recombination of photogenerated holes and electrons severely limits its photocatalytic efficiency. This situation necessitates the development of effective strategies to tackle these challenges. One well-documented approach is built-in electric field engineering in heterojunctions or composites, which has been shown to enhance electron transfer and thereby reduce the recombination of electrons and holes. This strategy has proven highly effective in significantly improving photocatalytic activity for the degradation of pollutants in wastewater. In this context, we summarize recent advancements in built-in electric field engineering in photocatalysts, highlighting the fundamentals and modifications of this approach, as well as its positive impact on photocatalytic performance in the degradation of wastewater pollutants.

Perspectives on phase engineering of nanomaterials

This perspective highlights the representative progress of phase engineering of nanomaterials (PEN) with an emphasis on noble metals and transition metal dichalcogenides, and proposes future directions in this emerging field.

High-Throughput and Scalable Exfoliation of Large-Sized Ultrathin 2D Materials by Ball-Milling in Supercritical Carbon Dioxide

The 2D materials exhibit numerous technological applications, but their scalable production is a core challenge. Herein, ball milling exfoliation in supercritical carbon dioxide (scCO2) and polystyrene (PS) is demonstrated to completely exfoliate hexagonal boron nitride nanosheets (BNNSs), graphene, molybdenum disulfide (MoS2), and tungsten disulfide (WS2). The exfoliation yield of 91%, 93%, 92%, and 92% and average aspect ratios of 743, 565, 564, and 502 for BNNSs, graphene, MoS2, and WS2, respectively, are achieved. Integrating exfoliated BNNSS in the polystyrene matrix, 3768 % thermal conductivity in the axial direction and 316% in the cross-plane direction at 12 wt.% loading is increased. Also, the in-plane and cross-plane electrical conductivity of 6.3 × 10-4 S m-1 and 6.6 × 10-3 S m-1, respectively, and the electromagnetic interference (EMI) of 63.3 dB is achieved by exfoliated graphene nanosheets based composite. High thermal and electrical conductivities and EMI shielding are attributed to the high aspect ratio and ultrathin morphology of the exfoliated nanosheets, which exert high charge mobility and form better the percolation network in the composite films due to their high surface area. The process demonstrate herein can produce substantial quantities of diverse 2D nanosheets for widespread commercial utilization.

Air-Stable, Large-Area 2D Metals and Semiconductors

Two-dimensional (2D) materials are popular for fundamental physics study and technological applications in next-generation electronics, spintronics, and optoelectronic devices due to a wide range of intriguing physical and chemical properties. Recently, the family of 2D metals and 2D semiconductors has been expanding rapidly because they offer properties once unknown to us. One of the challenges to fully access their properties is poor stability in ambient conditions. In the first half of this Review, we briefly summarize common methods of preparing 2D metals and highlight some recent approaches for making air-stable 2D metals. Additionally, we introduce the physicochemical properties of some air-stable 2D metals recently explored. The second half discusses the air stability and oxidation mechanisms of 2D transition metal dichalcogenides and some elemental 2D semiconductors. Their air stability can be enhanced by optimizing growth temperature, substrates, and precursors during 2D material growth to improve material quality, which will be discussed. Other methods, including doping, postgrowth annealing, and encapsulation of insulators that can suppress defects and isolate the encapsulated samples from the ambient environment, will be reviewed.

Tailoring functional two-dimensional nanohybrids: A comprehensive approach for enhancing photocatalytic remediation

Photocatalysis is gaining prominence as a viable alternative to conventional biohazard treatment technologies. Two-dimensional (2D) nanomaterials have become crucial for fabricating novel photocatalysts due to their nanosheet architectures, large surface areas, and remarkable physicochemical properties. Furthermore, a variety of applications are possible with 2D nanomaterials, either in combination with other functional nanoparticles or by utilizing their inherent properties. Henceforth, the review commences its exploration into the synthesis of these materials, delving into their inherent properties and assessing their biocompatibility. Subsequently, an overview of mechanisms involved in the photocatalytic degradation of pollutants and the processes related to antimicrobial action is presented. As an integral part of our review, we conduct a systematic analysis of existing challenges and various types of 2D nanohybrid materials tailored for applications in the photocatalytic degradation of contaminants and the inactivation of pathogens through photocatalysis. This investigation will aid to contribute to the formulation of decision-making criteria and design principles for the next generation of 2D nanohybrid materials. Additionally, it is crucial to emphasize that further research is imperative for advancing our understanding of 2D nanohybrid materials.

Strain Engineering of Unconventional Crystal-Phase Noble Metal Nanocatalysts

The crystal phase, alongside the composition, morphology, architecture, facet, size, and dimensionality, has been recognized as a critical factor influencing the properties of noble metal nanomaterials in various applications. In particular, unconventional crystal phases can potentially enable fascinating properties in noble metal nanomaterials. Recent years have witnessed notable advances in the phase engineering of nanomaterials (PEN). Within the accessible strategies for phase engineering, the effect of strain cannot be ignored because strain can act not only as the driving force of phase transition but also as the origin of the diverse physicochemical properties of the unconventional crystal phase. In this review, we highlight the development of unconventional crystal-phase noble metal nanomaterials within strain engineering. We begin with a short introduction of the unconventional crystal phase and strain effect in noble metal nanomaterials. Next, the correlations of the structure and performance of strain-engineered unconventional crystal-phase noble metal nanomaterials in electrocatalysis are highlighted, as well as the phase transitions of noble metal nanomaterials induced by the strain effect. Lastly, the challenges and opportunities within this rapidly developing field (i.e., the strain engineering of unconventional crystal-phase noble metal nanocatalysts) are discussed.

Large area single crystal gold of single nanometer thickness for nanophotonics

Two-dimensional single crystal metals, in which the behavior of highly confined optical modes is intertwined with quantum phenomena, are highly sought after for next-generation technologies. Here, we report large area (>104 μm2), single crystal two-dimensional gold flakes (2DGFs) with thicknesses down to a single nanometer level, employing an atomic-level precision chemical etching approach. The decrease of the thickness down to such scales leads to the quantization of the electronic states, endowing 2DGFs with quantum-confinement-augmented optical nonlinearity, particularly leading to more than two orders of magnitude enhancement in harmonic generation compared with their thick polycrystalline counterparts. The nanometer-scale thickness and single crystal quality makes 2DGFs a promising platform for realizing plasmonic nanostructures with nanoscale optical confinement. This is demonstrated by patterning 2DGFs into nanoribbon arrays, exhibiting strongly confined near infrared plasmonic resonances with high quality factors. The developed 2DGFs provide an emerging platform for nanophotonic research and open up opportunities for applications in ultrathin plasmonic, optoelectronic and quantum devices.

In Situ TEM Characterization and Modulation for Phase Engineering of Nanomaterials

Solid-state phase transformation is an intriguing phenomenon in crystalline or noncrystalline solids due to the distinct physical and chemical properties that can be obtained and modified by phase engineering. Compared to bulk solids, nanomaterials exhibit enhanced capability for phase engineering due to their small sizes and high surface-to-volume ratios, facilitating various emerging applications. To establish a comprehensive atomistic understanding of phase engineering, in situ transmission electron microscopy (TEM) techniques have emerged as powerful tools, providing unprecedented atomic-resolution imaging, multiple characterization and stimulation mechanisms, and real-time integrations with various external fields. In this Review, we present a comprehensive overview of recent advances in in situ TEM studies to characterize and modulate nanomaterials for phase transformations under different stimuli, including mechanical, thermal, electrical, environmental, optical, and magnetic factors. We briefly introduce crystalline structures and polymorphism and then summarize phase stability and phase transformation models. The advanced experimental setups of in situ techniques are outlined and the advantages of in situ TEM phase engineering are highlighted, as demonstrated via several representative examples. Besides, the distinctive properties that can be obtained from in situ phase engineering are presented. Finally, current challenges and future research opportunities, along with their potential applications, are suggested.

Continuous Phase Regulation of a Pd-Te Hexagonal Nanoplate Library

Phase regulation of noble metal-based nanomaterials provides a promising strategy for boosting the catalytic performance. However, realizing the continuous phase modulation in two-dimensional structures and unveiling the relevant structure-performance relationship remain significant challenges. In this work, we present the first example of continuous phase modulation in a library of Pd-Te hexagonal nanoplates (HNPs) from cubic-phase Pd4Te, rhombohedral-phase Pd20Te7, rhombohedral-phase Pd8Te3, and hexagonal-phase PdTe to hexagonal-phase PdTe2. Notably, the continuous phase regulation of the well-defined Pd-Te HNPs enables the successful modulation of the distance between adjacent Pd active sites, triggering an exciting way for tuning the relevant catalytic reactions intrinsically. The proof-of-concept oxygen reduction reaction (ORR) experiment shows a Pd-Pd distance-dependent ORR performance, where the hexagonal-phase PdTe HNPs present the best electrochemical performance in ORR (mass activity and specific activity of 1.02 A mg-1Pd and 1.83 mA cm-2Pd at 0.9 V vs RHE). Theoretical investigation reveals that the increased Pd-Pd distance relates to the weak *OH adsorption over Pd-Te HNPs, thus contributing to the remarkable ORR activity of PdTe HNPs. This work advances the phase-controlled synthesis of noble metal-based nanostructures, which gives huge impetus to the design of high-efficiency nanomaterials for diverse applications.

Density functional theory study of Au-fcc/Ge and Au-hcp/Ge interfaces

In recent years, nanostructures with hexagonal polytypes of gold have been synthesised, opening new possibilities in nanoscience and nanotechnology. As bulk gold crystallizes in the fcc phase, surface effects can play an important role in stabilizing hexagonal gold nanostructures. Here, we investigate several heterostructures with Ge substrates, including the fcc and hcp phases of gold that have been observed experimentally. We determine and discuss their interfacial energies and optimized atomic arrangements, comparing the theory results with available experimental data. Our DFT calculations for the Au-fcc(011)/Ge(001) junction show how the presence of defects in the interface layer can help to stabilize the atomic pattern, consistent with microscopic images. Although the Au-hcp/Ge interface is characterized by a similar interface energy, it reveals large atomic displacements due to significant mismatch. Finally, analyzing the electronic properties, we demonstrate that Au/Ge systems have metallic character, but covalent-like bonding states between interfacial Ge and Au atoms are also present.

Recent Progress on Phase Engineering of Nanomaterials

As a key structural parameter, phase depicts the arrangement of atoms in materials. Normally, a nanomaterial exists in its thermodynamically stable crystal phase. With the development of nanotechnology, nanomaterials with unconventional crystal phases, which rarely exist in their bulk counterparts, or amorphous phase have been prepared using carefully controlled reaction conditions. Together these methods are beginning to enable phase engineering of nanomaterials (PEN), i.e., the synthesis of nanomaterials with unconventional phases and the transformation between different phases, to obtain desired properties and functions. This Review summarizes the research progress in the field of PEN. First, we present representative strategies for the direct synthesis of unconventional phases and modulation of phase transformation in diverse kinds of nanomaterials. We cover the synthesis of nanomaterials ranging from metal nanostructures such as Au, Ag, Cu, Pd, and Ru, and their alloys; metal oxides, borides, and carbides; to transition metal dichalcogenides (TMDs) and 2D layered materials. We review synthesis and growth methods ranging from wet-chemical reduction and seed-mediated epitaxial growth to chemical vapor deposition (CVD), high pressure phase transformation, and electron and ion-beam irradiation. After that, we summarize the significant influence of phase on the various properties of unconventional-phase nanomaterials. We also discuss the potential applications of the developed unconventional-phase nanomaterials in different areas including catalysis, electrochemical energy storage (batteries and supercapacitors), solar cells, optoelectronics, and sensing. Finally, we discuss existing challenges and future research directions in PEN.

Strain and Surface Engineering of Multicomponent Metallic Nanomaterials with Unconventional Phases

Multicomponent metallic nanomaterials with unconventional phases show great prospects in electrochemical energy storage and conversion, owing to unique crystal structures and abundant structural effects. In this review, we emphasize the progress in the strain and surface engineering of these novel nanomaterials. We start with a brief introduction of the structural configurations of these materials, based on the interaction types between the components. Next, the fundamentals of strain, strain effect in relevant metallic nanomaterials with unconventional phases, and their formation mechanisms are discussed. Then the progress in surface engineering of these multicomponent metallic nanomaterials is demonstrated from the aspects of morphology control, crystallinity control, surface modification, and surface reconstruction. Moreover, the applications of the strain- and surface-engineered unconventional nanomaterials mainly in electrocatalysis are also introduced, where in addition to the catalytic performance, the structure-performance correlations are highlighted. Finally, the challenges and opportunities in this promising field are prospected.

Structural Transformation of Unconventional-Phase Materials

The structural transformation of materials, which involves the evolution of different structural features, including phase, composition, morphology, etc., under external conditions, represents an important fundamental phenomenon and has drawn substantial research interest. Recently, materials with unconventional phases that are different from their thermodynamically stable ones have been demonstrated to possess distinct properties and compelling functions and can further serve as starting materials for structural transformation studies. The identification and mechanism study of the structural transformation process of unconventional-phase starting materials can not only provide deep insights into their thermodynamic stability in potential applications but also offer effective approaches for the synthesis of other unconventional structures. Here, we briefly summarize the recent research progress on the structural transformation of some typical starting materials with various unconventional phases, including the metastable crystalline phase, amorphous phase, and heterophase, induced by different approaches. The importance of unconventional-phase starting materials in the structural modulation of resultant intermediates and products will be highlighted. The employment of diverse in situ/operando characterization techniques and theoretical simulations in studying the mechanism of the structural transformation process will also be introduced. Finally, we discuss the existing challenges in this emerging research field and provide some future research directions.

Nanoarchitectonics of Metallene Materials for Electrocatalysis

Controlling the synthesis of metal nanostructures is one approach for catalyst engineering and performance optimization in electrocatalysis. As an emerging class of unconventional electrocatalysts, two-dimensional (2D) metallene electrocatalysts with ultrathin sheet-like morphology have gained ever-growing attention and exhibited superior performance in electrocatalysis owing to their distinctive properties originating from structural anisotropy, rich surface chemistry, and efficient mass diffusion capability. Many significant advances in synthetic methods and electrocatalytic applications for 2D metallenes have been obtained in recent years. Therefore, an in-depth review summarizing the progress in developing 2D metallenes for electrochemical applications is highly needed. Unlike most reported reviews on the 2D metallenes, this review starts by introducing the preparation of 2D metallenes based on the classification of the metals (e.g., noble metals, and non-noble metals) instead of synthetic methods. Some typical strategies for preparing each kind of metal are enumerated in detail. Then, the utilization of 2D metallenes in electrocatalytic applications, especially in the electrocatalytic conversion reactions, including the hydrogen evolution reaction, oxygen evolution reaction, oxygen reduction reaction, fuel oxidation reaction, CO₂ reduction reaction, and N₂ reduction reaction, are comprehensively discussed. Finally, current challenges and opportunities for future research on metallenes in electrochemical energy conversion are proposed.

Intrinsic Optical Properties and Emerging Applications of Gold Nanostructures

The collective oscillation of free electrons at the nanoscale surface of gold nanostructures is closely modulated by tuning the size, shape/morphology, phase, composition, hybridization, assembly, and nanopatterning, along with the surroundings of the plasmonic surface located at a dielectric interface with air, liquid, and solid. This review first introduces the physical origin of the intrinsic optical properties of gold nanostructures and further summarizes stimuli-responsive changes in optical properties, metal-field-enhanced optical signals, luminescence spectral shaping, chiroptical response, and photogenerated hot carriers. The current success in the landscape of nanoscience and nanotechnology mainly originates from the abundant optical properties of gold nanostructures in the thermodynamically stable face-centered cubic (fcc) phase. It has been further extended by crystal phase engineering to prepare thermodynamically unfavorable phases (e.g., kinetically stable) and heterophases to modulate their intriguing phase-dependent optical properties. A broad range of promising applications, including but not limited to full-color displays, solar energy harvesting, photochemical reactions, optical sensing, and microscopic/biomedical imaging, have fostered parallel research on the multitude of physical effects occurring in gold nanostructures.

Surface Ligands Dictate the Mechanical Properties of Inorganic Nanomaterials

The ability for organic surface chemistry to influence the properties of inorganic nanomaterials is appreciated in some instances but is poorly understood in terms of mechanical behavior. Here we demonstrate that the global mechanical strength of a silver nanoplate can be modulated according to the local binding enthalpy of its surface ligands. A continuum-based core-shell model for nanoplate deformation shows that the interior of a particle retains bulk-like properties while the surface shell has yield strength values that depend on surface chemistry. Electron diffraction experiments reveal that, relative to the core, atoms at the nanoplate surface undergo lattice expansion and disordering directly related to the coordinating strength of the surface ligand. As a result, plastic deformation of the shell is more difficult, leading to an enhancement of the global mechanical strength of the plate. These results demonstrate a size-dependent coupling between chemistry and mechanics at the nanoscale.

Defect engineering of two-dimensional materials for advanced energy conversion and storage

In the global trend towards carbon neutrality, sustainable energy conversion and storage technologies are of vital significance to tackle the energy crisis and climate change. However, traditional electrode materials gradually reach their property limits. Two-dimensional (2D) materials featuring large aspect ratios and tunable surface properties exhibit tremendous potential for improving the performance of energy conversion and storage devices. To rationally control the physical and chemical properties for specific applications, defect engineering of 2D materials has been investigated extensively, and is becoming a versatile strategy to promote the electrode reaction kinetics. Simultaneously, exploring the in-depth mechanisms underlying defect action in electrode reactions is crucial to provide profound insight into structure tailoring and property optimization. In this review, we highlight the cutting-edge advances in defect engineering in 2D materials as well as their considerable effects in energy-related applications. Moreover, the confronting challenges and promising directions are discussed for the development of advanced energy conversion and storage systems.

Micron-Scale Fabrication of Ultrathin Amorphous Copper Nanosheets Templated by DNA Scaffolds

Two-dimensional (2D) amorphous materials could outperform their crystalline counterparts toward various applications because they have more defects and reactive sites and thus could exhibit a unique surface chemical state and provide an advanced electron/ion transport path. Nevertheless, it is challenging to fabricate ultrathin and large-sized 2D amorphous metallic nanomaterials in a mild and controllable manner due to the strong metallic bonds between metal atoms. Here, we reported a simple yet fast (10 min) DNA nanosheet (DNS)-templated method to synthesize micron-scale amorphous copper nanosheets (CuNSs) with a thickness of 1.9 ± 0.4 nm in aqueous solution at room temperature. We demonstrated the amorphous feature of the DNS/CuNSs by transmission electron microscopy (TEM) and X-ray diffraction (XRD). Interestingly, we found that they could transform to crystalline forms under continuous electron beam irradiation. Of note, the amorphous DNS/CuNSs exhibited much stronger photoemission (∼62-fold) and photostability than dsDNA-templated discrete Cu nanoclusters due to the elevation of both the conduction band (CB) and valence band (VB). Such ultrathin amorphous DNS/CuNSs hold great potential for practical applications in biosensing, nanodevices, and photodevices.

The Effect of Mesogenic Coronas on the Type and Anisotropy of Gold Nanoparticle Superlattices: When Can the Tail Wag the Dog?

The correlation between the size of nanoparticles, the structure and shape of mesogenic ligands and the ensuing assembly behaviour is not really understood. Closer inspection shows very surprising features. Here, 2- and 4-nm gold nanoparticles (NPs) were synthesized, and grafted with a forked ligand containing two rod-like mesogens in its branches: one cholesterol, the other with azobenzene. The 4-nm NPs also contained n-hexylthiol as co-ligand. They were found to form a FCC cubic superlattice, whereas the 2-nm NPs form hexagonal HCP with weak birefringence, hence with partially oriented ligands. The structures were compared with those of related systems containing a range of different azobenzene-to-cholesterol ratios, all giving body-centred tetragonal superlattices with various degrees of anisotropy. Geometric analysis is presented in terms of the asphericity of the NPs' surroundings, requirement for space-filling and structural anisotropy. Some general rules are derived to help design the soft corona around the NPs in order to obtain superlattices with the desired structure and anisotropy.

Two-Dimensional Metal Nanostructures: From Theoretical Understanding to Experiment

This paper reviews recent studies on the preparation of two-dimensional (2D) metal nanostructures, particularly nanosheets. As metal often exists in the high-symmetry crystal phase, such as face centered cubic structures, reducing the symmetry is often needed for the formation of low-dimensional nanostructures. Recent advances in characterization and theory allow for a deeper understanding of the formation of 2D nanostructures. This Review firstly describes the relevant theoretical framework to help the experimentalists understand chemical driving forces for the synthesis of 2D metal nanostructures, followed by examples on the shape control of different metals. Recent applications of 2D metal nanostructures, including catalysis, bioimaging, plasmonics, and sensing, are discussed. We end the Review with a summary and outlook of the challenges and opportunities in the design, synthesis, and application of 2D metal nanostructures.

Strain-regulated Gibbs free energy enables reversible redox chemistry of chalcogenides for sodium ion batteries

Manipulating the reversible redox chemistry of transition metal dichalcogenides for energy storage often faces great challenges as it is difficult to regulate the discharged products directly. Herein we report that tensile-strained MoSe₂ (TS-MoSe₂) can act as a host to transfer its strain to corresponding discharged product Mo, thus contributing to the regulation of Gibbs free energy change (ΔG) and enabling a reversible sodium storage mechanism. The inherited strain results in lattice distortion of Mo, which adjusts the d-band center upshifted closer to the Fermi level to enhance the adsorbability of Na₂Se, thereby leading to a decreased ΔG of the redox chemistry between Mo/Na₂Se and MoSe₂. Ex situ and in situ experiments revealed that, unlike the unstrained MoSe₂, TS-MoSe₂ shows a highly reversible sodium storage, along with an evidently improved reaction kinetics. This work sheds light on the study on electrochemical energy storage mechanism of other electrode materials.

Manipulating the redox chemistry of transition metal dichalcogenides still faces challenges. Here the authors report that tensile-strained MoSe2 can pass on the strain to its sodiated product Mo, and thus regulate the Gibbs free energy in the charging process to enable the reversible sodium storage.

Microwave Synthesized 2D Gold and Its 2D-2D Hybrids

Xenes, i.e., monoelemental two-dimensional atomic sheets, are promising for sensitive and ultrafast sensor applications owing to exceptional carrier mobility; however, most of them oxidize below 500 °C and therefore cannot be employed for high-temperature applications. 2D gold, an oxidation-resistant plasmonic Xene, is extremely promising. 2D gold was experimentally realized by both atomic layer deposition and chemical synthesis using sodium citrate. However, it is imperative to develop a new facile single-step method to synthesize 2D gold. Here, liquid-phase synthesis of 2D gold is demonstrated by microwave exposure to auric chloride dispersed in dimethylformamide. Microscopies (AFM and high-resolution TEM), spectroscopies (Raman, UV-vis, and X-ray photoelectron), and X-ray diffraction establish the formation of a hexagonal crystallographic phase for 2D gold. 2D-2D hybrids of 2D gold have also been synthesized and investigated for electronic/optoelectronic behaviors and SERS-based molecular sensing. DFT band structure calculation for 2D gold and its hybrids corroborates the experimental findings.

Insight into the effects of the crystal phase of Ru over ultrathin Ru@Pt core-shell nanosheets for methanol electrooxidation

Coating a second metal on the surface of ultrathin 2D nanosheets (NSs) could induce lattice strain and modify the electronic structure, thereby changing the surface reactivity. Herein, we report the effects of different crystal phases of Ru on the electrocatalytic performance of ultrathin Ru@Pt core-shell NSs for the methanol oxidation reaction (MOR). Importantly, Ru with a novel face-centered-cubic phase was found to have more effect on the electronic structure of Pt than Ru with a conventional hexagonal close-packed phase, thereby leading to improved electrocatalytic activity toward the MOR under acidic and basic conditions. It is believed that the strategy presented here would offer a new approach to the construction of bimetallic core-shell nanostructures with various promising applications.

Wet-chemical synthesis of two-dimensional metal nanomaterials for electrocatalysis

Two-dimensional (2D) metal nanomaterials have gained ever-growing research interest owing to their fascinating physicochemical properties and promising application, especially in the field of electrocatalysis. In this review, we briefly introduce the recent advances in wet-chemical synthesis of 2D metal nanomaterials. Subsequently, the catalytic performances of 2D metal nanomaterials in a variety of electrochemical reactions are illustrated. Finally, we summarize current challenges and highlight our perspectives on preparing high-performance 2D metal electrocatalysts.

Surface Molecular Functionalization of Unusual Phase Metal Nanomaterials for Highly Efficient Electrochemical Carbon Dioxide Reduction under Industry-Relevant Current Density

The electrochemical carbon dioxide reduction reaction (CO₂ RR) provides a sustainable strategy to relieve global warming and achieve carbon neutrality. However, the practical application of CO₂ RR is still limited by the poor selectivity and low current density. Here, the surface molecular functionalization of unusual phase metal nanomaterials for high-performance CO₂ RR under industry-relevant current density is reported. It is observed that 5-mercapto-1-methyltetrazole (MMT)-modified 4H/face-centered cubic (fcc) gold (Au) nanorods demonstrate greatly enhanced CO₂ RR performance than original oleylamine (OAm)-capped 4H/fcc Au nanorods in both an H-type cell and flow cell. Significantly, MMT-modified 4H/fcc Au nanorods deliver an excellent carbon monoxide selectivity of 95.6% under the industry-relevant current density of 200 mA cm^-2 . Density functional theory calculations reveal distinct electronic modulations by surface ligands, in which MMT improves while OAm suppresses the surface electroactivity of 4H/fcc Au nanorods. Furthermore, this method can be extended to various MMT derivatives and conventional fcc Au nanostructures in boosting CO₂ RR performance.

Deformation-Induced Phase Transformations in Gold Nanoribbons with the 4H Phase

The mechanical stability of metallic nanomaterials has been intensively studied due to their unique structures and promising applications. Although extensive investigations have been carried out on the deformation behaviors of metallic nanomaterials, the atomic-scale deformation mechanism of metallic nanomaterials with unconventional hexagonal structures remains unclear because of the lack of direct experimental observation. Here, we conduct an atomic-resolution in situ tensile-straining transmission electron microscopy investigation on the deformation mechanism of gold nanoribbons with the 4H (hexagonal) phase. Our results reveal that plastic deformation in the 4H gold nanoribbons comprises three stages, in which both full and partial dislocations are involved. At the early deformation stage, plastic deformation is governed by full dislocation activities. Partial dislocations are subsequently activated in regions that have undergone full dislocation gliding, leading to phase transformation from the 4H phase to the face-centered cubic (FCC) phase. At the last stage of the deformation process, the volume fraction of the FCC phase increases, and full dislocation activities in the FCC regions also play an important role.

2D Heterostructures for Ubiquitous Electronics and Optoelectronics: Principles, Opportunities, and Challenges

A grand family of two-dimensional (2D) materials and their heterostructures have been discovered through the extensive experimental and theoretical efforts of chemists, material scientists, physicists, and technologists. These pioneering works contribute to realizing the fundamental platforms to explore and analyze new physical/chemical properties and technological phenomena at the micro-nano-pico scales. Engineering 2D van der Waals (vdW) materials and their heterostructures via chemical and physical methods with a suitable choice of stacking order, thickness, and interlayer interactions enable exotic carrier dynamics, showing potential in high-frequency electronics, broadband optoelectronics, low-power neuromorphic computing, and ubiquitous electronics. This comprehensive review addresses recent advances in terms of representative 2D materials, the general fabrication methods, and characterization techniques and the vital role of the physical parameters affecting the quality of 2D heterostructures. The main emphasis is on 2D heterostructures and 3D-bulk (3D) hybrid systems exhibiting intrinsic quantum mechanical responses in the optical, valley, and topological states. Finally, we discuss the universality of 2D heterostructures with representative applications and trends for future electronics and optoelectronics (FEO) under the challenges and opportunities from physical, nanotechnological, and material synthesis perspectives.

Direct Atomic-Scale Observation of Ultrasmall Ag Nanowires that Exhibit fcc, bcc, and hcp Structures under Bending

Metals usually have three crystal structures: face-centered cubic (fcc), body-centered cubic (bcc), and hexagonal-close packed (hcp) structures. Typically, metals exhibit only one of these structures at room temperature. Mechanical processing can cause phase transition in metals, however, metals that exhibit all the three crystal structures have rarely been approached, even when hydrostatic pressure or shock conditions are applied. Here, through in situ observation of the atomic-scale bending and tensile process of ∼5  nm-sized Ag nanowires (NWs), we show that bending is an effective method to facilitate fcc-structured Ag to access all the above-mentioned structures. The process of transitioning the fcc structure into a bcc structure, then into an hcp structure, and finally into a re-oriented fcc structure under bending has been witnessed in its entirety. This re-oriented fcc structure is twin-related to the matrix, which leads to twin nucleation without the need for partial dislocation activities. The results of this study advance our understanding of the deformation mechanism of small-sized fcc metals.

Surface Engineering Assisted Size and Structure Modulation of Gold Nanoclusters by Ionic Liquid Cations

Surface modification induced core size/structure change is a recent discovery in inorganic nanoparticles research, and has rarely been revealed at the molecular level. Here, we exemplify with atomically precise Au nanoclusters (NCs) that proper surface modification can selectively stabilize the desired Au⁰ core, conducive to the formation of size/structure-controlled Au NCs. Leveraging π-π enhanced ion-pairing interactions, ionic liquid (IL) cations are bonded to Au^I -thiolate complexes. The hydrophobic-hydrophobic interactions between IL cations subsequently provide a good mechanism to prolong the size of the Au^I -thiolate complexes, selectively producing small-sized Au NCs upon reduction. Through combined control over the structure and concentration of IL cations, pH and solvent polarity, we are able to produce atomically precise Au NCs with customizable size, atomic packing structure, and surface chemistry. This work also provides a facile means to integrate/synergize the materials functionalities of Au NCs and ILs, increasing their acceptance in diverse fields.

Emerging beyond-graphene elemental 2D materials for energy and catalysis applications

Elemental two-dimensional (2D) materials have emerged as promising candidates for energy and catalysis applications due to their unique physical, chemical, and electronic properties. These materials are advantageous in offering massive surface-to-volume ratios, favorable transport properties, intriguing physicochemical properties, and confinement effects resulting from the 2D ultrathin structure. In this review, we focus on the recent advances in emerging energy and catalysis applications based on beyond-graphene elemental 2D materials. First, we briefly introduce the general classification, structure, and properties of elemental 2D materials and the new advances in material preparation. We then discuss various applications in energy harvesting and storage, including solar cells, piezoelectric and triboelectric nanogenerators, thermoelectric devices, batteries, and supercapacitors. We further discuss the explorations of beyond-graphene elemental 2D materials for electrocatalysis, photocatalysis, and heterogeneous catalysis. Finally, the challenges and perspectives for the future development of elemental 2D materials in energy and catalysis are discussed.

Crystal Structure Dependent Dissolution of Non-Cubic Au Crystallites in Aqua Regia

Properties of metal crystallites are governed by their morphologies and inherent crystal structures. In this work, bipyramidal Au microcrystallites hosting non-cubic lattices, body-centered orthorhombic and tetragonal (together termed as bc(o,t)), are investigated for their stability in aqua regia. Specifically, microcrystallites comprising 92 % of bc(o,t) have been subjected to aqua regia of different concentrations and the changes in morphology and lattice phases have been monitored using scanning electron microscopy and X-ray diffraction techniques. The dissolution process was found to be crystal structure dependent and begin at the bipyramidal tips enriched with fcc lattice while retaining the bc(o,t) rich body. Interestingly, with increasing the reaction times, the remaining core was found to be highly reluctant to dissolution and instead, transformed to tetragonal lattices which with increasing treatment, exhibited lattice parameters closer to that of fcc. The study reveals the presence of a bc(o,t)-fcc core-shell structure with the tips enriched with fcc.

Unconventional-Phase Crystalline Materials Constructed from Multiscale Building Blocks

Crystal phase, an intrinsic characteristic of crystalline materials, is one of the key parameters to determine their physicochemical properties. Recently, great progress has been made in the synthesis of nanomaterials with unconventional phases that are different from their thermodynamically stable bulk counterparts via various synthetic methods. A nanocrystalline material can also be viewed as an assembly of atoms with long-range order. When larger entities, such as nanoclusters, nanoparticles, and microparticles, are used as building blocks, supercrystalline materials with rich phases are obtained, some of which even have no analogues in the atomic and molecular crystals. The unconventional phases of nanocrystalline and supercrystalline materials endow them with distinctive properties as compared to their conventional counterparts. This Review highlights the state-of-the-art progress of nanocrystalline and supercrystalline materials with unconventional phases constructed from multiscale building blocks, including atoms, nanoclusters, spherical and anisotropic nanoparticles, and microparticles. Emerging strategies for engineering their crystal phases are introduced, with highlights on the governing parameters that are essential for the formation of unconventional phases. Phase-dependent properties and applications of nanocrystalline and supercrystalline materials are summarized. Finally, major challenges and opportunities in future research directions are proposed.

Metastable Facet-Controlled Cu2WS4 Single Crystals with Enhanced Adsorption Activity for Gaseous Elemental Mercury

Purposively designing environmental advanced materials and elucidating the underlying reactivity mechanism at the atomic level allows for the further optimization of the removal performance for contaminants. Herein, using well facet-controlled I-Cu₂WS₄ single crystals as a model transition metal chalcogenide sorbent, we investigated the adsorption performance of the exposed facets toward gaseous elemental mercury (Hg⁰). We discovered that the decahedron exhibited not only facet-dependent adsorption properties for Hg⁰ but also recrystallization along the preferential [001] growth direction from a metastable state to the steady state. Besides, the metastable crystals with a predominant exposure of {101} facets dominated the promising adsorption efficiency (about 99% at 75 °C) while the saturated adsorption capacity was evaluated to be 2.35 mg·g^-1. Subsequently, comprehensive characterizations and X-ray adsorption fine structure (XAFS), accompanied by density functional theory (DFT) calculations, revealed that it might be owing to the coordinatively unsaturated local environment of W atoms with S defects and the surface relative stability of different facets, which could be affected by the change in surface atom configuration. Hence, the new insight into the facet-dependent adsorption property of transition metal chalcogenide for Hg⁰ may have important implications, and the atomic-level study directly provides instructions for development and design of highly efficient functional materials.

Crystal Phase Control of Gold Nanomaterials by Wet-Chemical Synthesis

Gold (Au), a transition metal with an atomic number of 79 in the periodic table of elements, was discovered in approximately 3000 B.C. Due to the ultrahigh chemical stability and brilliant golden color, Au had long been thought to be a most inert material and was widely utilized in art, jewelry, and finance. However, it has been found that Au becomes exceptionally active as a catalyst when its size shrinks to the nanometer scale. With continuous efforts toward the exploration of catalytic applications over the past decades, Au nanomaterials show critical importance in many catalytic processes. Besides catalysis, Au nanomaterials also possess other promising applications in plasmonics, sensing, biology and medicine, due to their unique localized surface plasmon resonance, intriguing biocompatibility, and superior stability. Unfortunately, the practical applications of Au nanomaterials could be limited because of the scarce reserves and high price of Au. Therefore, it is quite essential to further explore novel physicochemical properties and functions of Au nanomaterials so as to enhance their performance in different types of applications.Recently, phase engineering of nanomaterials (PEN), which involves the rearrangement of atoms in the unit cell, has emerged as a fantastic and effective strategy to adjust the intrinsic physicochemical properties of nanomaterials. In this Account, we give an overview of the recent progress on crystal phase control of Au nanomaterials using wet-chemical synthesis. Starting from a brief introduction of the research background, we first describe the development history of wet-chemical synthesis of Au nanomaterials and especially emphasize the key research findings. Subsequently, we introduce the typical Au nanomaterials with untraditional crystal phases and heterophases that have been observed, such as 2H, 4H, body-centered phases, and crystal-phase heterostructures. Importantly, crystal phase control of Au nanomaterials by wet-chemical synthesis is systematically described. After that, we highlight the importance of crystal phase control in Au nanomaterials by demonstrating the remarkable effect of crystal phases on their physicochemical properties (e.g., electronic and optical properties) and potential applications (e.g., catalysis). Finally, after a concise summary of recent advances in this emerging research field, some personal perspectives are provided on the challenges, opportunities, and research directions in the future.

Closest Packing Polymorphism Interfaced Metastable Transition Metal for Efficient Hydrogen Evolution

Metastable materials are promising because of their catalytic properties, high-energy structure, and unique electronic environment. However, the unstable nature inherited from the metastability hinders further performance improvement and practical applications of these materials. Herein, this limitation is successfully addressed by constructing an in situ polymorphism interface (inf) between the metastable hexagonal-close-packed (hcp) phase and its stable counterpart (face-centered cubic, fcc) in cobalt-nickel (CoNi) alloy. Calculations reveal that the interfacial synergism derived from the hcp and fcc phases lowers the formation energy and enhances stability. Consequently, the optimized CoNi-inf exhibits an exceptionally low potential of 72 mV at 10 mA cm^-2 and a Tafel slope of 57 mV dec^-1 for the hydrogen evolution reaction (HER) in 1.0 m KOH. Furthermore, it is superior to most state-of-the-art non-noble-metal-based HER catalysts. No noticeable activity decay or structural changes are observed even over 14 h of catalysis. The computational simulation further rationalizes that the interface of CoNi-inf with a suitable d-band center provides uniform sites for hydrogen adsorption, leading to a distinguished HER catalytic activity. This work, therefore, presents a new route for designing metastable catalysts for potential energy conversion.

Gold nanowire growth through stacking fault mechanism by oleylamine-mediated synthesis

Tadpole-like gold nanowires were obtained by the oleylamine-mediated synthesis presenting an unusual mixture of fcc and hcp phases. Structural analyses were performed to understand their structure and growth using aberration-corrected high-resolution scanning transmission electron microscopy and electron diffraction at the tail region of tadpoles showing that the anisotropic shape occurred due to stacking fault defects. Stacking faults and twin defects are responsible for the hcp phase inferring a defect dependent growth. The stacking fault model used in X-ray diffraction (XRD) refinement resulted in 60% of hcp stacking sequences. Temperature-dependent XRD analyses showed that the faults become unstable around 120 °C, and it is completely converted to the fcc phase at 230 °C. We attribute the nanowire formation to a stacking fault mechanism of growth that begins in the later stage of nanoparticle growth. The UV-Vis spectrum presented two localized surface plasmon resonance bands at 500 nm and from 800 nm extending to near-infrared, associated with transverse and longitudinal modes, respectively. A surprising ferromagnetic behavior is also observed with a blocking temperature near 300 K.

Light Tailoring of Internal Atomic Structure of Gold Nanorods

Laser processing of gold nanorods (Au NRs) relying on light-matter interaction provides great opportunities in various potential applications. Unveiling the light-induced structure change is a crucial goal in order to control the shape and related properties for practical application. However, the internal atomic structure control of metallic NRs has long been a challenge. Here, the concept of internal atomic structure tailored with light is demonstrated and Au NRs with various internal atomic structures including point defects, twin structures, and polycrystalline nanospheres are fabricated. Experimental characterization and theoretical simulation show that light-induced localized energy deposition and dynamic stresses distribution give rise to atomic structure change. Au NRs with internal defects show enhanced potential to improve activity. The concept of light tailoring of internal atomic structure represents a promising strategy for the rational design of metallic NRs to boost wide applications.

Critical differences in 3D atomic structure of individual ligand-protected nanocrystals in solution

Precise three-dimensional (3D) atomic structure determination of individual nanocrystals is a prerequisite for understanding and predicting their physical properties. Nanocrystals from the same synthesis batch display what are often presumed to be small but possibly important differences in size, lattice distortions, and defects, which can only be understood by structural characterization with high spatial 3D resolution. We solved the structures of individual colloidal platinum nanocrystals by developing atomic-resolution 3D liquid-cell electron microscopy to reveal critical intrinsic heterogeneity of ligand-protected platinum nanocrystals in solution, including structural degeneracies, lattice parameter deviations, internal defects, and strain. These differences in structure lead to substantial contributions to free energies, consequential enough that they must be considered in any discussion of fundamental nanocrystal properties or applications.

Phase engineering of nanomaterials

Phase has emerged as an important structural parameter - in addition to composition, morphology, architecture, facet, size and dimensionality - that determines the properties and functionalities of nanomaterials. In particular, unconventional phases in nanomaterials that are unattainable in the bulk state can potentially endow nanomaterials with intriguing properties and innovative applications. Great progress has been made in the phase engineering of nanomaterials (PEN), including synthesis of nanomaterials with unconventional phases and phase transformation of nanomaterials. This Review provides an overview on the recent progress in PEN. We discuss various strategies used to synthesize nanomaterials with unconventional phases and induce phase transformation of nanomaterials, by taking noble metals and layered transition metal dichalcogenides as typical examples. Moreover, we also highlight recent advances in the preparation of amorphous nanomaterials, amorphous-crystalline and crystal phase-based hetero-nanostructures. We also provide personal perspectives on challenges and opportunities in this emerging field, including exploration of phase-dependent properties and applications, rational design of phase-based heterostructures and extension of the concept of phase engineering to a wider range of materials.

Reshaping enhancement of gold nanorods by femtosecond double-pulse laser

Gold nanorod (Au NR) is an attractive material due to its superior physical and chemical properties. Various applications in diagnostics and biomedicine have been demonstrated. The single-pulse laser is commonly used to reshape nanoparticles in a solvent; however, the laser-material reaction mechanisms underlying nanoparticle reshaping remain unclear. Here, we report the reshaping of Au NRs by ultrafast pump-probe-like double-pulse laser irradiation to understand the reaction dynamics. We demonstrate the enhancement of double-pulse-induced reshaping, which provides an opportunity to design new Au NR structures. It shows that the reshaping enhancement is dependent on the delay time (${\tau _s}$τ_s) between a pair of separated pulses. The absorption peak wavelength of Au NRs exposed to the shaped double pulse was lower than that of using a single pulse of the same total fluence when ${\tau _s}$τ_s was less than the electron-phonon relaxation time. This phenomenon was mainly attributed to changes in electronic heat transport and electron-phonon coupling, which affected the pulse delay-dependent nanorod (NR) temperature.