Collective behaviour in two-dimensional cobalt nanoparticle assemblies observed by magnetic force microscopy

Dual Influence of Size and Electric Field on Gold Nanoparticles: Insights into 2D Monolayer Assembly

Self-assembled gold nanoparticles (Au-NPs) possess distinctive properties that are highly desirable in diverse nanotechnological applications. This study meticulously explores the size-dependent behavior of Au-NPs under an electric field, specifically focusing on sizes ranging from 5 to 40 nm, and their subsequent assembly into 2D monolayers on an n-type silicon substrate. The primary objective is to refine the assembly process and augment the functional characteristics of the resultant nanostructures. Utilizing a multifaceted analytical approach encompassing X-ray diffraction (XRD) and scanning electron microscopy (SEM) with energy-dispersive X-ray spectroscopy (EDXS), atomic force microscopy (AFM), and COMSOL multiphysics simulation, this work yields comprehensive insights. Results reveal that the electric field and nanoparticle size critically influence assembly dynamics due to variations in surface energy and electrostatic interactions. Larger Au-NPs (20, 30, and 40 nm) experience enhanced dipolar interactions and more substantial polarizability, enabling more efficient alignment and organization under an applied electric field. This leads to the formation of structured, uniform monolayers with minimal vacancies and smoother surfaces. In contrast, smaller Au-NPs (5, 10, and 15 nm) exhibit lower polarizability, which hampers alignment and promotes clustering and voids. XRD analysis delineates notable disparities in peak intensities and positions: smaller Au-NPs exhibit diminished (111) peak intensities, indicative of uneven distribution and crystallinity, whereas larger particles manifest higher intensities and well-defined peaks across multiple crystallographic planes. SEM images portray diverse surface coverages with AFM corroborating that larger Au-NPs achieve uniform and continuous monolayers with minimal height variations. COMSOL simulations substantiate these findings by illustrating the efficient alignment and settling of larger Au-NPs under the electric field. This study bridges critical gaps in understanding how nanoparticle size modulates assembly dynamics and the resultant properties of 2D Au-NP monolayers, offering pivotal insights into engineering advanced nanostructured materials tailored to specific applications in electronics, coatings, photonics, and catalysis.

Tunable crystalline assemblies using surface-engineered protein cages

Assembly of nanoparticles into superlattices yields nanomaterials with novel properties. We have recently shown that engineered protein cages are excellent building blocks for the assembly of inorganic nanoparticles into highly structured hybrid materials, with unprecedented precision. In this study, we show that the protein matrix, composed of surface-charged protein cages, can be readily tuned to achieve a number of different crystalline assemblies. Simply by altering the assembly conditions, different types of crystalline structures were produced, without the need to further modify the cages. Future work can utilize these new protein scaffolds to create nanoparticle superlattices with various assembly geometries and thus tune the functionality of these hybrid materials.

Nickel-Induced Reduced Graphene Oxide Nanoribbon Formation on Highly Ordered Pyrolytic Graphite for Electronic and Magnetic Applications

The development of nanoribbon-like structures is an effective strategy to harness the potential benefits of graphenic materials due to their excellent electrical properties, advantageous edge sites, rapid electron transport, and large specific area. Herein, parallel and connected magnetic nanostructured nanoribbons are obtained through the synthesis of reduced graphene oxide (rGO) using NiCl2 as a precursor with potential applications in nascent electronic and magnetic devices. Several analytical techniques have been used for the thorough characterization of the modified surfaces. Atomic force microscopy (AFM) shows the characteristic topographical features of the nanoribbons. While X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and Raman spectroscopy provided information on the chemical state of Ni and graphene-like structures, magnetic force microscopy (MFM) and scanning Kelvin probe microscopy (SKPFM) confirmed the preferential concentration of Ni onto rGO nanoribbons. These results indicate that the synthesized material shows 1D ordering of nickel nanoparticles (NiNPs)-decorating tiny rGO flakes into thin threads and the subsequent 2D arrangement of the latter into parallel ribbons following the topography of the HOPG basal plane.

Self-Assembled Monolayers for Interfacial Engineering in Solution-Processed Thin-Film Electronic Devices: Design, Fabrication, and Applications

Interfacial engineering has long been a vital means of improving thin-film device performance, especially for organic electronics, perovskites, and hybrid devices. It greatly facilitates the fabrication and performance of solution-processed thin-film devices, including organic field effect transistors (OFETs), organic solar cells (OSCs), perovskite solar cells (PVSCs), and organic light-emitting diodes (OLEDs). However, due to the limitation of traditional interfacial materials, further progress of these thin-film devices is hampered particularly in terms of stability, flexibility, and sensitivity. The deadlock has gradually been broken through the development of self-assembled monolayers (SAMs), which possess distinct benefits in transparency, diversity, stability, sensitivity, selectivity, and surface passivation ability. In this review, we first showed the evolution of SAMs, elucidating their working mechanisms and structure-property relationships by assessing a wide range of SAM materials reported to date. A comprehensive comparison of various SAM growth, fabrication, and characterization methods was presented to help readers interested in applying SAM to their works. Moreover, the recent progress of the SAM design and applications in mainstream thin-film electronic devices, including OFETs, OSCs, PVSCs and OLEDs, was summarized. Finally, an outlook and prospects section summarizes the major challenges for the further development of SAMs used in thin-film devices.

Interface-confined precise processing of Ag nanowire into AgPd-nanoparticle-sealed AgAu nanotroughs for boosting ethanol electrooxidation

The functions of nanomaterials are closely linked with their fine structures and compositions. Precisely processing nanoparticles into morphology- and composition-varied nanostructures can a cutting-edge technology for producing complex nanostructures. Herein, we develop an interface-confined precise processing strategy towards toluene/water-interfacial Ag nanowires. Interfacial Ag nanowires are transformed into AgPd-nanoparticle-sealed AgAu nanotroughs with abundant AgPd/AgAu hetero-junctions (i.e., AgPdAu hetero-junction nanostructures). By adjusting the reaction conditions, composition-varied AgPdAu hetero-junction nanostructures can be obtained. The formation of AgPdAu hetero-junction nanostructures can be attributed to interface-confined precise etching towards Ag nanowires separately from the two subphases of the water and the toluene. Composition-optimized Ag13Pd67Au20 hetero-junction nanostructure shows satisfactory catalytic performance towards ethanol electrooxidation: ∼4 and 2 times in electrochemical-activity-surface-area-normalized activities; ∼6 and 5 times in mass-normalized activities higher than commercial Pd/C and Pt/C, respectively. The outstanding catalytic capability of Ag13Pd67Au20 may be attributed to optimized composition, porous nanostructures as well as abundant AgPd/AgAu hetero-junctions. This work demonstrates the feasibility of precisely processing interfacial nanoparticles, opening the way for creating morphology-well-defined composition-varied complex nanostructures.

Recent Progress on Phase Engineering of Nanomaterials

As a key structural parameter, phase depicts the arrangement of atoms in materials. Normally, a nanomaterial exists in its thermodynamically stable crystal phase. With the development of nanotechnology, nanomaterials with unconventional crystal phases, which rarely exist in their bulk counterparts, or amorphous phase have been prepared using carefully controlled reaction conditions. Together these methods are beginning to enable phase engineering of nanomaterials (PEN), i.e., the synthesis of nanomaterials with unconventional phases and the transformation between different phases, to obtain desired properties and functions. This Review summarizes the research progress in the field of PEN. First, we present representative strategies for the direct synthesis of unconventional phases and modulation of phase transformation in diverse kinds of nanomaterials. We cover the synthesis of nanomaterials ranging from metal nanostructures such as Au, Ag, Cu, Pd, and Ru, and their alloys; metal oxides, borides, and carbides; to transition metal dichalcogenides (TMDs) and 2D layered materials. We review synthesis and growth methods ranging from wet-chemical reduction and seed-mediated epitaxial growth to chemical vapor deposition (CVD), high pressure phase transformation, and electron and ion-beam irradiation. After that, we summarize the significant influence of phase on the various properties of unconventional-phase nanomaterials. We also discuss the potential applications of the developed unconventional-phase nanomaterials in different areas including catalysis, electrochemical energy storage (batteries and supercapacitors), solar cells, optoelectronics, and sensing. Finally, we discuss existing challenges and future research directions in PEN.

Electric Field-Driven Self-Assembly of Gold Nanoparticle Monolayers on Silicon Substrates

Nanoparticles (NPs) bridge the gap between bulk materials and their equivalent molecular/atomic counterparts. The physical, optical, and electronic properties of individual NPs alter with the changes in their surrounding environment at the nanoscale. Similarly, the characteristics of thin films of NPs depend on their lateral and volumetric densities. Thus, attaining single monolayers of these NPs would play a vital role in the improved characteristics of semiconductor devices such as nanosensors, field effect transistors, and energy harvesting devices. Developing nanosensors, for instance, requires precise methods to fabricate a monolayer of NPs on selected substrates for sensing and other applications. Herein, we developed a physical fabrication method to form a monolayer of NPs on a planar silicon surface by creating an electric field of intensity 5.71 × 104 V/m between parallel plates of a capacitor, by applying a DC voltage. The physics of monolayer formation caused by an externally applied electric field on the gold NPs (Au-NPs) of size 20 nm in diameter and possesses a zeta potential of -250 to -290 mV, is further analyzed with the help of the finite element simulation. The enhanced electric field, in the order of 108 V/m, around the Au-NPs indicates a high surface charge density on the NPs, which results in a high electric force per unit area that guides them to settle uniformly on the surface of the silicon substrate.

Plate-Like Colloidal Metal Nanoparticles

The pseudo-two-dimensional (2D) morphology of plate-like metal nanoparticles makes them one of the most anisotropic, mechanistically understood, and tunable structures available. Although well-known for their superior plasmonic properties, recent progress in the 2D growth of various other materials has led to an increasingly diverse family of plate-like metal nanoparticles, giving rise to numerous appealing properties and applications. In this review, we summarize recent progress on the solution-phase growth of colloidal plate-like metal nanoparticles, including plasmonic and other metals, with an emphasis on mechanistic insights for different synthetic strategies, the crystallographic habits of different metals, and the use of nanoplates as scaffolds for the synthesis of other derivative structures. We additionally highlight representative self-assembly techniques and provide a brief overview on the attractive properties and unique versatility benefiting from the 2D morphology. Finally, we share our opinions on the existing challenges and future perspectives for plate-like metal nanomaterials.

Magnetic Particle Self-Assembly at Functionalized Interfaces

We study the assembly of magnetite nanoparticles in water-based ferrofluids in wetting layers close to silicon substrates with different functionalization without and with an out-of-plane magnetic field. For particles of nominal sizes 5, 15, and 25 nm, we extract density profiles from neutron reflectivity measurements. We show that self-assembly is only promoted by a magnetic field if a seed layer is formed at the silicon substrate. Such a layer can be formed by chemisorption of activated N-hydroxysuccinimide ester-coated nanoparticles at a (3-aminopropyl)triethoxysilane functionalized surface. Less dense packing is reported for physisorption of the same particles at a piranha-treated (strongly hydrophilic) silicon wafer, and no wetting layer is found for a self-assembled monolayer of octadecyltrichlorosilane (strongly hydrophobic) at the interface. We show that once the seed layer is formed and under an out-of-plane magnetic field further wetting layers assemble. These layers become denser with time, larger magnetic fields, higher particle concentrations, and larger moment of the nanoparticles.

Nanoscale Spatial Distribution of Supported Nanoparticles Controls Activity and Stability in Powder Catalysts for CO Oxidation and Photocatalytic H2 Evolution

Supported metal nanoparticles are essential components of high-performing catalysts, and their structures are intensely researched. In comparison, nanoparticle spatial distribution in powder catalysts is conventionally not quantified, and the influence of this collective property on catalyst performance remains poorly investigated. Here, we demonstrate a general colloidal self-assembly method to control uniformity of nanoparticle spatial distribution on common industrial powder supports. We quantify distributions on the nanoscale using image statistics and show that the type of nanospatial distribution determines not only the stability, but also the activity of heterogeneous catalysts. Widely investigated systems (Au-TiO2 for CO oxidation thermocatalysis and Pd-TiO2 for H2 evolution photocatalysis) were used to showcase the universal importance of nanoparticle spatial organization. Spatially and temporally resolved microkinetic modeling revealed that nonuniformly distributed Au nanoparticles suffer from local depletion of surface oxygen, and therefore lower CO oxidation activity, as compared to uniformly distributed nanoparticles. Nanoparticle spatial distribution also determines the stability of Pd-TiO2 photocatalysts, because nonuniformly distributed nanoparticles sinter while uniformly distributed nanoparticles do not. This work introduces new tools to evaluate and understand catalyst collective (ensemble) properties in powder catalysts, which thereby pave the way to more active and stable heterogeneous catalysts.

Nanocrystals Assembled by the Chemical Reaction of the Dispersion Solvent

The development of methods to pattern nanocrystals with different sizes and shapes remains a challenge. In this study, we demonstrate a unique class of bottom-up approaches to assemble nanocrystals into patterns. Our approach for patterning nanocrystals focuses on the utilization and control of the chemical reaction of solvents surrounding nanocrystals. The photopolymerization of solvent molecules through a photomask creates time-dependent concentration gradients of the solvents. Dispersed nanocrystals such as silver nanowires (AgNWs) migrate and are gradually organized and integrated into the polymerizing films based on the concentration gradients. The AgNW-embedded film properties are determined by the organized AgNW structures and include light transmission and electrical conductivity. Overall, the demonstrated method is very simple, widely applicable to various nanocrystals and solvents, and can thus contribute to the development of a new class of nanocrystal patterning methods.

Self-Assembly of Magnetic Nanoparticles in Ferrofluids on Different Templates Investigated by Neutron Reflectometry

In this article we review the process by which magnetite nanoparticles self-assemble onto solid surfaces. The focus is on neutron reflectometry studies providing information on the density and magnetization depth profiles of buried interfaces. Specific attention is given to the near-interface "wetting" layer and to examples of magnetite nanoparticles on a hydrophilic silicon crystal, one coated with (3-Aminopropyl)triethoxysilane, and finally, one with a magnetic film with out-of-plane magnetization.

Anisotropic Magnetic Resonance in Random Nanocrystal Quantum Dot Ensembles

Magnetic anisotropy critically determines the utility of magnetic nanocrystals (NCs) in new nanomagnetism technologies. Using angular-dependent electron magnetic resonance (EMR), we observe magnetic anisotropy in isotropically arranged NCs of a nonmagnetic material. We show that the shape of the EMR angular variation can be well described by a simple model that considers magnetic dipole-dipole interactions between dipoles randomly located in the NCs, most likely due to surface dangling bonds. The magnetic anisotropy results from the fact that the energy term arising from the magnetic dipole-dipole interactions between all magnetic moments in the system is dominated by only a few dipole pairs, which always have an anisotropic geometric arrangement. Our work shows that magnetic anisotropy may be a general feature of NC systems containing randomly distributed magnetic dipoles.

Writing chemical patterns using electrospun fibers as nanoscale inkpots for directed assembly of colloidal nanocrystals

Applications that range from electronics to biotechnology will greatly benefit from low-cost, scalable and multiplex fabrication of spatially defined arrays of colloidal inorganic nanocrystals. In this work, we present a novel additive patterning approach based on the use of electrospun nanofibers (NFs) as inkpots for end-functional polymers. The localized grafting of end-functional polymers from spatially defined nanofibers results in covalently bound chemical patterns. The main factors that determine the width of the nanopatterns are the diameter of the NF and the extent of spreading during the thermal annealing process. Lowering the surface energy of the substrates via silanization and a proper choice of the grafting conditions enable the fabrication of nanoscale patterns over centimeter length scales. The fabricated patterns of end-grafted polymers serve as the templates for spatially defined assembly of colloidal metal and metal oxide nanocrystals of varying sizes (15 to 100 nm), shapes (spherical, cube, rod), and compositions (Au, Ag, Pt, TiO2), as well as semiconductor quantum dots, including the assembly of semiconductor nanoplatelets.

Indirect magnetic force microscopy

Magnetic force microscopy (MFM) is an atomic force microscopy (AFM)-based technique to map magnetic domains in a sample. MFM is widely used to characterize magnetic recording media, magnetic domain walls in materials, nanoparticles and more recently iron deposits in biological samples. However, conventional MFM requires multiple scans of the samples, suffers from various artifacts and is limited in its capability for multimodal imaging or imaging in a fluid environment. We propose a new modality, namely indirect magnetic force microscopy (ID-MFM), a technique that employs an ultrathin barrier between the probe and the sample. Using fluorescently conjugated superparamagnetic nanoparticles, we demonstrate how ID-MFM can be achieved using commercially available silicon nitride windows, MFM probes and AFM equipment. The MFM signals obtained using ID-MFM were comparable to those obtained using conventional MFM. Further, samples prepared for ID-MFM were compatible with multi-modal imaging via fluorescence and transmission electron microscopy. Thus ID-MFM can serve as a high-throughput, multi-modal microscopy technique which can be especially attractive for detecting magnetism in nanoparticles and biological samples.

New type of doping effect via metallization of surface reduction in SnO2

The use of conventional doping methods requires consideration of not only the energy connection with the base material but also the limits of the type and doping range of the dopant. The scope of the physico-chemical change must be determined from the properties of the base material, and when this limit is exceeded, a large energy barrier must be formed between the base material and the dopant as in a heterojunction. Thus, starting from a different viewpoint, we introduce a so-called metallization of surface reduction method, which easily overcomes the disadvantages of existing methods while having the effect of doping the base material. Such new synthetic techniques enable sequential energy arrangements–gradients from the surface to the centre of the material–so that free energy transfer effects can be obtained as per the energies in the semiconducting band, eliminating the energy discontinuity of the heterojunction.

Array atomic force microscopy for real-time multiparametric analysis

Nanoscale multipoint structure-function analysis is essential for deciphering the complexity of multiscale biological and physical systems. Atomic force microscopy (AFM) allows nanoscale structure-function imaging in various operating environments and can be integrated seamlessly with disparate probe-based sensing and manipulation technologies. Conventional AFMs only permit sequential single-point analysis; widespread adoption of array AFMs for simultaneous multipoint study is challenging owing to the intrinsic limitations of existing technological approaches. Here, we describe a prototype dispersive optics-based array AFM capable of simultaneously monitoring multiple probe-sample interactions. A single supercontinuum laser beam is utilized to spatially and spectrally map multiple cantilevers, to isolate and record beam deflection from individual cantilevers using distinct wavelength selection. This design provides a remarkably simplified yet effective solution to overcome the optical cross-talk while maintaining subnanometer sensitivity and compatibility with probe-based sensors. We demonstrate the versatility and robustness of our system on parallel multiparametric imaging at multiscale levels ranging from surface morphology to hydrophobicity and electric potential mapping in both air and liquid, mechanical wave propagation in polymeric films, and the dynamics of living cells. This multiparametric, multiscale approach provides opportunities for studying the emergent properties of atomic-scale mechanical and physicochemical interactions in a wide range of physical and biological networks.

Bubble Magnetometry of Nanoparticle Heterogeneity and Interaction

Bubbles have a rich history as transducers in particle-physics experiments. In a solid-state analogue, we use bubble domains in nanomagnetic films to measure magnetic nanoparticles. This technique can determine the magnetic orientation of a single nanoparticle in a fraction of a second and generate a full hysteresis loop in a few seconds. We achieve this high throughput by tuning the nanomagnetic properties of the films, including the Dzyaloshinskii-Moriya interaction, in an application of topological protection from the skyrmion state to a nanoparticle sensor. We develop the technique on nickel-iron nanorods and iron-oxide nanoparticles, which delineate a wide range of properties and applications. Bubble magnetometry enables precise statistical analysis of the magnetic hysteresis of dispersed nanoparticles, and direct measurement of a transition from superparamagnetic behavior as single nanoparticles to collective behavior in nanoscale agglomerates. These results demonstrate a practical capability for measuring the heterogeneity and interaction of magnetic nanoparticles.

A tunable magnetic metamaterial based on the dipolar four-state Potts model

Metamaterials, tunable artificial materials, are useful playgrounds to investigate magnetic systems. So far, artificial Ising spin systems have revealed features such as emergent magnetic monopoles^1,2 and charge fragmentation³. Here we present a metasystem composed of a lattice of dipolarly coupled nanomagnets. The magnetic spin of each nanomagnet is constrained to lie along a body diagonal, which yields four possible spin states. We show that the magnetic ordering of this metasystem (antiferromagnetic, ferromagnetic or spin ice like) is determined by the spin states orientation relative to the underlying lattice. The dipolar four-state Potts model explains our experimental observations and sheds light on the role of symmetry, as well as short- and long-range dipolar magnetic interactions, in such non-Ising spin systems.

Magnetic hardening of Nd-Ce-Fe-B films with high Ce concentration

Partial substitution of Ce in Nd-Fe-B magnets is a feasible way to cope with the crisis of Nd and Dy in Nd-Fe-B production and reduce the cost of Nd-Fe-B magnets. In the present paper, the Nd-Ce-Fe-B films with high performance have been successfully fabricated by using an ultra-high vacuum (UHV) magnetron sputtering system. High magnetic performance with a ceorcivity of 13.3 kOe, a remanence of 11.4 kGs and a maximum energy product of 29.4 GMOe is obtained with the Ce substitution for more than 50 wt.% Nd without Dy addition. The high coercivity and (BH)_max achieved in this work are much larger than those of previously reported Nd-Ce-Fe-B magnets with the same Ce concentration. The phase structure, microstructure and coercivity mechanism are analyzed. The coercivity mechanism is determined to be mainly dominated by nucleation. Based on the microstructure observation and coercivity mechanism analysis, the fine and well separated grains, smooth grain surface, small and less inhomogeneities should be responsible for the high coercivity. Our results encourage the further improvement of magnetic properties in Ce magnets including the bulk material with high Ce concentration.

Self-Assembled Layering of Magnetic Nanoparticles in a Ferrofluid on Silicon Surfaces

This article describes the three-dimensional self-assembly of monodisperse colloidal magnetite nanoparticles (NPs) from a dilute water-based ferrofluid onto a silicon surface and the dependence of the resultant magnetic structure on the applied field. The NPs assemble into close-packed layers on the surface followed by more loosely packed ones. The magnetic field-dependent magnetization of the individual NP layers depends on both the rotational freedom of the layer and the magnetization of the adjacent layers. For layers in which the NPs are more free to rotate, the easy axis of the NP can readily orient along the field direction. In more dense packing, free rotation of the NPs is hampered, and the NP ensembles likely build up quasi-domain states to minimize energy, which leads to lower magnetization in those layers. Detailed analysis of polarized neutron reflectometry data together with model calculations of the arrangement of the NPs within the layers and input from small-angle scattering measurements provide full characterization of the core/shell NP dimensions, degree of chaining, arrangement of the NPs within the different layers, and magnetization depth profile.

Efficient and Lightweight Electromagnetic Wave Absorber Derived from Metal Organic Framework-Encapsulated Cobalt Nanoparticles

Porous-carbon-based nanocomposites are gaining tremendous interest because of good compatibility, lightweight, and strong electromagnetic wave absorption. However, it is still a great challenge to design and synthesize porous-carbon-based composites with strong absorption capability and broad frequency bandwidth. Herein, a facile and effective method was developed to synthesize Co magnetic nanoparticles/metal organic framework (MOF) (Co NPs/ZIF-67) nanocomposites. Co NPs/porous C composites were subsequently obtained by annealing Co NPs/ZIF-67 nanocomposites at different temperatures under an inert atmosphere. The carbonized nanocomposites showed highly efficient electromagnetic wave absorption capability. Specifically, the optimal composite (i.e., Co/C-700) possessed a maximum reflection loss (RL) value of -30.31 dB at 11.03 GHz with an effective absorption bandwidth (RL ≤ -10 dB) of 4.93 GHz. The electromagnetic parameters and the absorption performance of the composites are readily tunable by adjusting the carbonization temperature and the concentration of Co NPs in the composites. Because of the combination of good impedance matching, dual-loss mechanism, and the synergistic effect between Co NPs and porous carbon composites, these Co NPs/MOF-derived composites are attractive candidates for electromagnetic wave absorbers.

A two-dimensional Fe-doped SnS2 magnetic semiconductor

Magnetic two-dimensional materials have attracted considerable attention for their significant potential application in spintronics. In this study, we present a high-quality Fe-doped SnS₂ monolayer exfoliated using a micromechanical cleavage method. Fe atoms were doped at the Sn atom sites, and the Fe contents are ∼2.1%, 1.5%, and 1.1%. The field-effect transistors based on the Fe_0.021Sn_0.979S₂ monolayer show n-type behavior and exhibit high optoelectronic performance. Magnetic measurements show that pure SnS₂ is diamagnetic, whereas Fe_0.021Sn_0.979S₂ exhibits ferromagnetic behavior with a perpendicular anisotropy at 2 K and a Curie temperature of ~31 K. Density functional theory calculations show that long-range ferromagnetic ordering in the Fe-doped SnS₂ monolayer is energetically stable, and the estimated Curie temperature agrees well with the results of our experiment. The results suggest that Fe-doped SnS₂ has significant potential in future nanoelectronic, magnetic, and optoelectronic applications.

Increased Surface Roughness in Polydimethylsiloxane Films by Physical and Chemical Methods

Two methods, the first physical and the other chemical, were investigated to modify the surface roughness of polydimethylsiloxane (PDMS) films. The physical method consisted of dispersing multi-walled carbon nanotubes (MWCNTs) and magnetic cobalt ferrites (CoFe₂O₄) prior to thermal cross-linking, and curing the composite system in the presence of a uniform magnetic field H. The chemical method was based on exposing the films to bromine vapours and then UV-irradiating. The characterizing techniques included scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), Fourier transform infrared (FTIR) spectroscopy, optical microscopy, atomic force microscopy (AFM) and magnetic force microscopy (MFM). The surface roughness was quantitatively analyzed by AFM. In the physical method, the random dispersion of MWCNTs (1% w/w) and magnetic nanoparticles (2% w/w) generated a roughness increase of about 200% (with respect to PDMS films without any treatment), but that change was 400% for films cured in the presence of H perpendicular to the surface. SEM, AFM and MFM showed that the magnetic particles always remained attached to the carbon nanotubes, and the effect on the roughness was interpreted as being due to a rupture of dispersion randomness and a possible induction of structuring in the direction of H. In the chemical method, the increase in roughness was even greater (1000%). Wells were generated with surface areas that were close to 100 μm² and depths of up to 500 nm. The observations of AFM images and FTIR spectra were in agreement with the hypothesis of etching by Br radicals generated by UV on the polymer chains. Both methods induced important changes in the surface roughness (the chemical method generated the greatest changes due to the formation of surface wells), which are of great importance in superficial technological processes.

Epitaxial growth of unusual 4H hexagonal Ir, Rh, Os, Ru and Cu nanostructures on 4H Au nanoribbons

This edge article reports the epitaxial growth of five 4H hexagonal metal nanostructures on 4H Au nanoribbons under ambient conditions.

Metal nanomaterials normally adopt the same crystal structure as their bulk counterparts. Herein, for the first time, the unusual 4H hexagonal Ir, Rh, Os, Ru and Cu nanostructures have been synthesized on 4H Au nanoribbons (NRBs) via solution-phase epitaxial growth under ambient conditions. Interestingly, the 4H Au NRBs undergo partial phase transformation from 4H to face-centered cubic (fcc) structures after the metal coating. As a result, a series of polytypic 4H/fcc bimetallic Au@M (M = Ir, Rh, Os, Ru and Cu) core–shell NRBs has been obtained. We believe that the rational crystal structure-controlled synthesis of metal nanomaterials will bring new opportunities for exploring their phase-dependent physicochemical properties and promising applications.

Electro-mechanical sensing in freestanding monolayered gold nanoparticle membranes

The electro-mechanical sensing properties of freestanding monolayered membranes of dodecanethiol coated 7 nm gold nanoparticles (NPs) are investigated using AFM force spectroscopy and conductive AFM simultaneously. The electrical resistance of the NP membranes increases sensitively with the point-load force applied in the center of the membranes using an AFM tip. Numerical simulations of electronic conduction in a hexagonally close-packed two-dimensional (2D) array of NPs under point load-deformation are carried out on the basis of electronic transport measurements at low temperatures and strain modeling of the NP membranes by finite element analysis. These simulations, supporting AFM-based electro-mechanical measurements, attribute the high strain sensitivity of the monolayered NP membranes to the exponential dependence of the tunnel electron transport in 2D NP arrays on the strain-induced length variation of the interparticle junctions. This work thus evidences a new class of highly sensitive nano-electro-mechanical systems based on freestanding monolayered gold NP membranes.

Magnetic Nanoparticles: Material Engineering and Emerging Applications in Lithography and Biomedicine

We present an interdisciplinary overview of material engineering and emerging applications of iron oxide nanoparticles. We discuss material engineering of nanoparticles in the broadest sense, emphasizing size and shape control, large-area self-assembly, composite/hybrid structures, and surface engineering. This is followed by a discussion of several non-traditional, emerging applications of iron oxide nanoparticles, including nanoparticle lithography, magnetic particle imaging, magnetic guided drug delivery, and positive contrast agents for magnetic resonance imaging. We conclude with a succinct discussion of the pharmacokinetics pathways of iron oxide nanoparticles in the human body -- an important and required practical consideration for any in vivo biomedical application, followed by a brief outlook of the field.

Investigation on electromagnetic characteristics, microwave absorption, thermal and mechanical properties of ferromagnetic cobalt–polystyrene composites in the X-band (8.4–12.4 GHz)

The electromagnetic, thermal and mechanical properties of ferromagnetic cobalt–polystyrene composites in the X-band (8.4–12.4 GHz) are investigated in order to explore their usage for wide band microwave absorbers.

Tailoring Anisotropic Interactions between Soft Nanospheres Using Dense Arrays of Smectic Liquid Crystal Edge Dislocations

We investigated composite films of gold nanoparticles (NPs)/liquid crystal (LC) defects as a model system to understand the key parameters, which allow for an accurate control of NP anisotropic self-assemblies using soft templates. We combined spectrophotometry, Raman spectroscopy, and grazing incidence small-angle X-ray scattering with calculations of dipole coupling models and soft sphere interactions. We demonstrate that dense arrays of elementary edge dislocations can strongly localize small NPs along the defect cores, resulting in formation of parallel chains of NPs. Furthermore, we show that within the dislocation cores the inter-NP distances can be tuned. This phenomenon appears to be driven by the competition between "soft (nano)sphere" attraction and LC-induced repulsion. We evidence two extreme regimes controlled by the solvent evaporation: (i) when the solvent evaporates abruptly, the spacing between neighboring NPs in the chains is dominated by van der Waals interactions between interdigitated capping ligands, leading to chains of close-packed NPs; (ii) when the solvent evaporates slowly, strong interdigitation between the is avoided, leading to a dominating LC-induced repulsion between NPs associated with the replacement of disordered cores by NPs. The templating of NPs by topological defects, beyond the technological inquiries, may enable creation, investigation, and manipulation of unique collective features for a wide range of nanomaterials.

Longitudinal domain wall formation in elongated assemblies of ferromagnetic nanoparticles

Through evaporation of dense colloids of ferromagnetic ~13 nm ε-Co particles onto carbon substrates, anisotropic magnetic dipolar interactions can support formation of elongated particle structures with aggregate thicknesses of 100-400 nm and lengths of up to some hundred microns. Lorenz microscopy and electron holography reveal collective magnetic ordering in these structures. However, in contrast to continuous ferromagnetic thin films of comparable dimensions, domain walls appear preferentially as longitudinal, i.e., oriented parallel to the long axis of the nanoparticle assemblies. We explain this unusual domain structure as the result of dipolar interactions and shape anisotropy, in the absence of inter-particle exchange coupling.

Cobalt/polypyrrole nanocomposites with controllable electromagnetic properties

In this work, cobalt/polypyrrole (Co/PPy) nanocomposites were prepared via an in situ oxidation polymerization of pyrrole in an aqueous dispersion of Co nanoparticles (NPs). The Co/PPy nanocomposites showed good electromagnetic properties because of the coexistence of magnetic loss and dielectric loss to electromagnetic waves. The electromagnetic wave absorbing bandwidth (reflection loss < -10 dB) for Co/PPy (30 wt% in a paraffin matrix) was located at 11.7-16.47 GHz with a thickness of 2 mm, and with a maximum reflection loss (around -33 dB) at 13.6 GHz. More interestingly, the electromagnetic wave absorbing properties of the nanocomposites can be easily controlled by tuning the ratio of the two components in the composites. This improved electromagnetic wave absorption may be attributed to the excellent electromagnetic match at the corresponding resonance peaks for dielectric and magnetic loss. These magnetic nanoparticles/conducting polymer nanocomposites are great potential candidates for use as electromagnetic wave absorbents due to their excellent properties such as wide absorbing frequency, strong absorption, good compatibility, low density and controllable absorbing properties.

Polarized neutron reflectivity from monolayers of self-assembled magnetic nanoparticles

We prepared monolayers of iron oxide nanoparticles via self-assembly on a bare silicon wafer and on a vanadium film sputter deposited onto a plane sapphire substrate. The magnetic configuration of nanoparticles in such a dense assembly was investigated by polarized neutron reflectivity. A theoretical model fit shows that the magnetic moments of nanoparticles form quasi domain-like configurations at remanence. This is attributed to the dipolar coupling amongst the nanoparticles.

Magnetic nanoparticle assembly arrays prepared by hierarchical self-assembly on a patterned surface

Inverted pyramid hole arrays were fabricated by photolithography and used as templates to direct the growth of colloidal nanoparticle assemblies. Cobalt ferrite nanoparticles deposit in the holes to yield high quality pyramid magnetic nanoparticle assembly arrays by carefully controlling the evaporation of the carrier fluid. Magnetic measurements indicate that the pyramid magnetic nanoparticle assembly arrays preferentially magnetize perpendicular to the substrate.

Infrared-induced variation of the magnetic properties of a magnetoplasmonic film with a 3D sub-micron periodic triangular roof-type antireflection structure

A carbon-matrix nickel composite magnetoplasmonic film with a 3D sub-micron periodic triangular roof-type antireflection structure (SPTAS) was fabricated via a simple and promising method that combines chemosynthesis with biomimetic techniques. The Troides helena (Linnaeus) forewing (T_FW) was chosen as the biomimetic template. The carbon-matrix Ni wing fabricated via electroless Ni deposition for 6 h (CNMF_6h) exhibits enhanced infrared absorption. Over a wavelength range (888-2500 nm), the enhancement of the infrared absorption of CNMF_6h is up to 1.85 times compared with the T_FW. Furthermore, infrared excitation induces a photothermal effect that results in variation in the magnetic properties of the carbon-matrix Ni wing. The magnetic properties were also confirmed using atomic force microscopy (AFM) and magnetic force microscopy (MFM). The good correlation between the AFM and MFM images demonstrates that the surface of the SPTAS of CNMF_6h exhibits strong magnetic properties. The infrared induced photothermal effect that results in magnetic variation is promising for use in the design of novel magnetoplasmonic films with potential applications in infrared information recording and heat-assisted magnetic recording.

Artificially engineered Heusler ferrimagnetic superlattice exhibiting perpendicular magnetic anisotropy

To extend density limits in magnetic recording industry, two separate strategies were developed to build the storage bit in last decade, introduction of perpendicular magnetic anisotropy (PMA) and adoption of ferrimagnetism/antiferromagnetism. Meanwhile, these properties significantly improve device performance, such as reducing spin-transfer torque energy consumption and decreasing signal-amplitude-loss. However, materials combining PMA and antiferromagnetism rather than transition-metal/rare-earth system were rarely developed. Here, we develop a new type of ferrimagnetic superlattice exhibiting PMA based on abundant Heusler alloy families. The superlattice is formed by [MnGa/Co₂FeAl] unit with their magnetizations antiparallel aligned. The effective anisotropy (K_u^eff) over 6 Merg/cm³ is obtained, and the SL can be easily built on various substrates with flexible lattice constants. The coercive force, saturation magnetization and K_u^eff of SLs are highly controllable by varying the thickness of MnGa and Co₂FeAl layers. The SLs will supply a new choice for magnetic recording and spintronics memory application such as magnetic random access memory.

Strategies for interfacing inorganic nanocrystals with biological systems based on polymer-coating

A representative set of nanocrystals made of semiconductors, Au and iron oxide, surface-capped with polymer ligands presenting various metal-coordinating groups.

Structural insights into magnetic clusters grown inside virus capsids

Magnetic nanoparticles have multiple applications in materials science. In particular, virus capsids have been suggested as promising templates for building up nanometric-sized magnetic clusters by taking advantage of their inner cavity as a nanoreactor. In this study we investigate the magnetization of individual cobalt-filled cowpea mosaic virus empty virus-like particles using atomic force microscopy. We also combine the analysis of the effects of dehydration on the structure of virus particles with a comparison of their magnetic signal to that provided by commercially available magnetic nanoparticles of similar size. These two approaches allow the evaluation of the structure of the metallic cluster grown inside the virus capsid. We conclude that, rather than forming solid clusters, cobalt inside viruses forms a discontinuous structure that does not completely fill the virus cavity and reaches about 10% of its volume.

Ferromagnetic resonance in ϵ-Co magnetic composites

We investigate the electromagnetic properties of assemblies of nanoscale ϵ-cobalt crystals with size range between 5 to 35 nm, embedded in a polystyrene matrix, at microwave (1-12 GHz) frequencies. We investigate the samples by transmission electron microscopy imaging, demonstrating that the particles aggregate and form chains and clusters. By using a broadband coaxial-line method, we extract the magnetic permeability in the frequency range from 1 to 12 GHz, and we study the shift of the ferromagnetic resonance (FMR) with respect to an externally applied magnetic field. We find that the zero-magnetic field ferromagnetic resonant peak shifts towards higher frequencies at finite magnetic fields, and the magnitude of complex permeability is reduced. At fields larger than 2.5 kOe the resonant frequency changes linearly with the applied magnetic field, demonstrating the transition to a state in which the nanoparticles become dynamically decoupled. In this regime, the particles inside clusters can be treated as non-interacting, and the peak position can be predicted from Kittel's FMR theory for non-interacting uniaxial spherical particles combined with the Landau-Lifshitz-Gilbert equation. In contrast, at low magnetic fields this magnetic order breaks down and the resonant frequency in zero magnetic field reaches a saturation value reflecting the interparticle interactions as resulting from aggregation. Our results show that the electromagnetic properties of these composite materials can be tuned by external magnetic fields and by changes in the aggregation structure.

Synthesis and assembly of nanomaterials under magnetic fields

Traditionally, magnetic field has long been regarded as an important means for studying the magnetic properties of materials. With the development of synthesis and assembly methods, magnetic field, similar to conventional reaction conditions such as temperature, pressure, and surfactant, has been developed as a new parameter for synthesizing and assembling special structures. To date, magnetic fields have been widely employed for materials synthesis and assembly of one-dimensional (1D), two-dimensional (2D) or three-dimensional (3D) aggregates. In this review, we aim to provide a summary on the applications of magnetic fields in this area. Overall, the objectives of this review are: (1) to theoretically discuss several factors that refer to magnetic field effects (MFEs); (2) to review the magnetic-field-induced synthesis of nanomaterials; the 1D structure of various nanomaterials, such as metal oxides/sulfide, metals, alloys, and carbon, will be described in detail. Moreover, the MFEs on spin states of ions, magnetic domain and product phase distribution will be also involved; (3) to review the alignment of carbon nanotubes, assembly of magnetic nanomaterials and photonic crystals with the help of magnetic fields; and (4) to sketch the future opportunities that magnetic fields can face in the area of materials synthesis and assembly.

Conductance control in VO2 nanowires by surface doping with gold nanoparticles

The material properties of semiconductor nanowires are greatly affected by electrical, optical, and chemical processes occurring at their surfaces because of the very large surface-to-volume ratio. Precise control over doping as well as the surface charge properties has been demonstrated in thin films and nanowires for fundamental physics and application-oriented research. However, surface doping behavior is expected to differ markedly from bulk doping in conventional semiconductor materials. Here, we show that placing gold nanoparticles, in controlled manner, on the surface of an insulating vanadium dioxide nanowire introduces local charge carriers in the nanowire, and one could, in principle, completely and continuously alter the material properties of the nanowire and obtain any intermediate level of conductivity. The current in the nanowire increased by nearly 3 times when gold nanoparticles of 10(11) cm(-2) order of density were controllably placed on the nanowire surface. A strong quadratic space-charge limited (SCL) transport behavior was also observed from the conductance curve suggesting the formation of two-dimensional (2D) electron-gas-like confined layer in the nanowire with adsorbed Au NPs. In addition to stimulating scientific interest, such unusual surface doping phenomena may lead to new applications of vanadium dioxide-based electronic, optical, and chemical sensing nanodevices.