Silver-nanoparticle-embedded antimicrobial paints based on vegetable oil

Bacterial-Infection-Triggered Release of Antibacterial Aldehyde from Triblock Copolyether Hydrogels

Bacterial infections pose a significant threat to public health worldwide. Hydrogel-based biomaterials have proven to be particularly useful in addressing persistent bacterial infections due to their stimuli-responsive degradability, high biocompatibility, ability to release antibacterial agents on demand, and long-lasting antibacterial activity. Herein, we fabricated ABA-type triblock copolyether hydrogels, wherein, hexanal, a bioactive aldehyde with antibacterial activity, was affixed to the hydrophobic micellar core via acetal linkage. The hydrogel exhibited degradation under acidic environment via the hydrolysis of acetal linkages, leading to the concomitant release of hexanal to exhibit highly potent bactericidal activity against both Escherichia coli and Staphylococcus aureus. Furthermore, a dual-mode release of the model therapeutic agent Nile Red from the hydrophobic micellar core of the hydrogel in conjunction with hexanal was demonstrated using this system. We anticipate that this study will provide a new platform for the development of hydrogels with tailorable release profiles for biologically active compounds that are activated by the acidification triggered by bacterial infection.

Clinical study of antibacterial medical textiles containing polyhydroxyalkanoate oligomers for reduction of hospital-acquired infections

INTRODUCTION

The prevention and control of hospital-acquired infections remain a significant challenge worldwide, as textiles used in hospital wards are highly involved in transmission processes. This paper reports a new antibacterial medical fabric used to prepare hospital pillowcases, bottom sheets and quilt covers for controlling and reducing hospital-acquired infections.

METHOD

The medical fabric was composed of blended yarns of staple polyester (PET) and degradable poly(3-hydroxybutyrate co-3-hydroxyvalerate) (PHBV)/polylactic acid (PLA) fibres, which were coated with polylactide oligomers (PLAO), which are environmentally friendly and safe antimicrobial agents with excellent thermal stability in high-temperature laundry. A clinical trial was conducted, with emphasis on the bacterial species that were closely related to the infection cases in the study hospital.

RESULT

After 7 days of use, 94% of PET/PHBV/PLA-PLAO fabric retained <20 colony-forming units/100 cm2 of the total bacterial amount, meeting hygiene and cleanliness standards.

CONCLUSION

This study demonstrates the potential of fabrics containing polyhydroxyalkanoate oligomers as highly effective, safe and long-lasting antimicrobial medical textiles that can effectively reduce the incidence of hospital-acquired infections.

Antimicrobial nanocomposite coatings for rapid intervention against catheter-associated urinary tract infections

Catheter-associated urinary tract infections (CAUTIs) pose a significant challenge in hospital settings. Current solutions available on the market involve incorporating antimicrobials and antiseptics into catheters. However, challenges such as uncontrolled release leading to undesirable toxicity, as well as the prevalence of antimicrobial resistance reduce the effectiveness of these solutions. Additionally, conventional antibiotics fail to effectively eradicate entrenched bacteria and metabolically suppressed bacteria present in the biofilm, necessitating the exploration of alternative strategies. Here, we introduce a novel polymer-nanocomposite coating that imparts rapid antimicrobial and anti-biofilm properties to coated urinary catheters. We have coated silicone-based urinary catheters with an organo-soluble antimicrobial polymer nanocomposite (APN), containing hydrophobic quaternized polyethyleneimine and zinc oxide nanoparticles, in a single step coating process. The coated surfaces exhibited rapid eradication of drug-resistant bacteria within 10-15 min, including E. coli, K. pneumoniae, MRSA, and S. epidermidis, as well as drug-resistant C. albicans fungi. APN coated catheters exhibited potent bactericidal activity against uropathogenic strains of E. coli, even when incubated in human urine. Furthermore, the stability of the coating and retention of antimicrobial activity was validated even after multiple washes. More importantly, this coating deterred biofilm formation on the catheter surface, and displayed rapid inactivation of metabolically repressed stationary phase and persister cells. The ability of the coated surfaces to disrupt bacterial membranes and induce the generation of intracellular reactive oxygen species (ROS) was assessed through different techniques, such as electron microscopy imaging, flow cytometry as well as fluorescence spectroscopy and microscopy. The surface coatings were found to be biocompatible in an in vivo mice model. Our simple one-step coating approach for catheters holds significant potential owing to its ability to tackle multidrug resistant bacteria and fungi, and the challenge of biofilm formation. This work brings us one step closer to enhancing patient care and safety in hospitals.

Effects of environmental metal and metalloid pollutants on plants and human health: exploring nano-remediation approach

Metal and metalloid pollutants severely threatens environmental ecosystems and human health, necessitating effective remediation strategies. Nanoparticle (NPs)-based approaches have gained significant attention as promising solutions for efficient removing heavy metals from various environmental matrices. The present review is focused on green synthesized NPs-mediated remediation such as the implementation of iron, carbon-based nanomaterials, metal oxides, and bio-based NPs. The review also explores the mechanisms of NPs interactions with heavy metals, including adsorption, precipitation, and redox reactions. Critical factors influencing the remediation efficiency, such as NPs size, surface charge, and composition, are systematically examined. Furthermore, the environmental fate, transport, and potential risks associated with the application of NPs are critically evaluated. The review also highlights various sources of metal and metalloid pollutants and their impact on human health and translocation in plant tissues. Prospects and challenges in translating NPs-based remediation from laboratory research to real-world applications are proposed. The current work will be helpful to direct future research endeavors and promote the sustainable implementation of metal and metalloid elimination.

Sonochemical synthesis of bioinspired graphene oxide-zinc oxide hydrogel for antibacterial painting on biodegradable polylactide film

Graphene oxide nanosheet (GO) is a multifunctional platform for binding with nanoparticles and stacking with two dimensional substrates. In this study, GO nanosheets were sonochemically decorated with zinc oxide nanoparticles (ZnO) and self-assembled into a hydrogel of GO-ZnO nanocomposite. The GO-ZnO hydrogel structure is a bioinspired approach for preserving graphene-based nanosheets from van der Waals stacking. X-ray diffraction analysis (XRD) showed that the sonochemical synthesis led to the formation of ZnO crystals on GO platforms. High water content (97.2%) of GO-ZnO hydrogel provided good property of ultrasonic dispersibility in water. Ultraviolet-visible spectroscopic analysis (UV-vis) revealed that optical band gap energy of ZnO nanoparticles (∼3.2 eV) GO-ZnO nanosheets (∼2.83 eV). Agar well diffusion tests presented effective antibacterial activities of GO-ZnO hydrogel against gram-negative bacteria (E. coli) and gram-positive bacteria (S. aureus). Especially, GO-ZnO hydrogel was directly used for brush painting on biodegradable polylactide (PLA) thin films. Graphene-based nanosheets with large surface area are key to van der Waals stacking and adhesion of GO-ZnO coating to the PLA substrate. The GO-ZnO/PLA films were characterized using photography, light transmittance spectroscopy, coating stability, scanning electron microscopy (SEM), energy-dispersive x-ray spectroscopic mapping (EDS), antibacterial test and mechanical tensile measurement. Specifically, GO-ZnO coating on PLA substrate exhibited stability in aqueous food simulants for packaging application. GO-ZnO coating inhibited the infectious growth ofE. colibiofilm. GO-ZnO/PLA films had strong tensile strength and elastic modulus. As a result, the investigation of antibacterial GO-ZnO hydrogel and GO-ZnO coating on PLA film is fundamental for sustainable development of packaging and biomedical applications.

Green Synthesis of Silver Nanoparticles by Fusarium oxysporum and its Function Against Aspergillus and Fusarium Fungi

(NPs) can be produced by various methods such as physical and chemical processes. However, environmentally friendly ways are increasingly requested. In this research, (Ag-NPs) were produced by Fusarium oxysporum, and its antifungal effect on Aspergillus and Fusarium was investigated. Nanoparticles were produced by silver nitrate salt and Fusarium oxysporum native to Isfahan city. In order to optimize the synthesis conditions, optimization of some factors such as volume, concentration, time, temperature, and pH of the extract was performed. The structural and physical properties of NPs were determined by spectrophotometer, XRD, FTIR FESEM, SEM, and TEM microscopy. For the study of the inhibitory effect of NPs on Fusarium and Aspergillus growth, the fungi were cultured in media containing various concentrations of NPs from 50 to 1500 ppm. Then, the colony diameter was measured for over 10 days and the growth inhibition percentage was estimated. For statistical analysis, the 600 Mann-Whitney tests have been applied.The NPs were produced after mixing the powdered fungal mass and silver nitrate salt in optimum conditions which were 2 mM of salt, triple fungal mass volume proportion relative to the salt, pH of 9, and temperature of 28 °C. The existence of a peak at 420 nm in FTIR was due to nanoparticle production. Based on the XRD, the synthesized NPs had suitable properties similar to the standard NPs reported in the studies. Images from TEM, SEM, and FESEM microscopes displayed uniform NPs in variable sizes between 25 and 100 nm. According to the results, the maximum growth inhibition percentage of Ag-NPs on Fusarium was approximately 60% at 1500 ppm, and 88% on Aspergillus at 800 ppm. Biosynthesized Ag-NPs with Fusarium oxysporum have desirable structural traits and can inhibit the growth of Fusarium and Aspergillus at significant levels.

Design of N-heterocycle based-phthalonitrile/metal phthalocyanine-silver nanoconjugates for cancer therapies

This study reports the anticancer properties of carbazole-containing phthalonitrile/phthalocyanine-modified silver nanoparticles for the first time. In this study, a new mono-substituted phthalonitrile namely 3-[9H-carbazole-9-ethoxy]phthalonitrile and its metal phthalocyanines {M = Zn, Co, and Mn(Cl)} were synthesized by template cyclotetramerization of phthalonitrile derivatives. The newly synthesized compounds were characterized using UV-vis, FT-IR, 1H NMR, 13C NMR, and mass spectroscopy. The resultant compounds were successfully linked to the surface of silver nanoparticles. The characterization of the surficial modification was carried out by applying the TEM technique. The cytotoxic activities of the studied nanoconjugates were tested against A549, DLD-1, and Wi38 cell lines by performing a (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) (MTT) assay with/without irradiation. Although the functionalization of silver nanoparticles increased the solubility of phthalocyanines in aqueous media, the presence of phthalonitrile/phthalocyanine derivatives on the silver nanoparticles' surface improved their biological properties. All the studied biological candidates exhibited antiproliferative activities against the cell lines. The IC50 values calculated were between 6.80 and 97.99 μM against the studied cell lines in the dark. However, the IC50 values determined were between 3.11 and 88.90 μM with irradiation. The highest IC50 values obtained were 3.11 and 3.52 μM against the DLD-1 cell line for nanoconjugates 1-AgNP and 3-AgNP, respectively. The findings indicated that the compounds may be utilized as anticancer agents after further studies.

Virulence traits and novel drug delivery strategies for mucormycosis post-COVID-19: a comprehensive review

The outbreak of a fatal black fungus infection after the resurgence of the cadaverous COVID-19 has exhorted scientists worldwide to develop a nutshell by repurposing or designing new formulations to address the crisis. Patients expressing COVID-19 are more susceptible to Mucormycosis (MCR) and thus fall easy prey to decease accounting for this global threat. Their mortality rates range around 32-70% depending on the organs affected and grow even higher despite the treatment. The many contemporary recommendations strongly advise using liposomal amphotericin B and surgery as first-line therapy whenever practicable. MCR is a dangerous infection that requires an antifungal drug administration on appropriate prescription, typically one of the following: Amphotericin B, Posaconazole, or Isavuconazole since the fungi that cause MCR are resistant to other medications like fluconazole, voriconazole, and echinocandins. Amphotericin B and Posaconazole are administered through veins (intravenously), and isavuconazole by mouth (orally). From last several years so many compounds are developed against invasive fungal disease but only few of them are able to induce effective treatment against the micorals. Adjuvant medicines, more particularly, are difficult to assess without prospective randomized controlled investigations, which are challenging to conduct given the lower incidence and higher mortality from Mucormycosis. The present analysis provides insight into pathogenesis, epidemiology, clinical manifestations, underlying fungal virulence, and growth mechanisms. In addition, current therapy for MCR in Post Covid-19 individuals includes conventional and novel nano-based advanced management systems for procuring against deadly fungal infection. The study urges involving nanomedicine to prevent fungal growth at the commencement of infection, delay the progression, and mitigate fatality risk.

The fabrication of bifunctional supramolecular glycolipid-based nanocomposite gel: insights into electrocatalytic performance with effective selectivity towards gold

Recovery, recycling, and reuse of metal waste have been re-intensified in the current era to build a sustainable future. In this context, gel nanocomposites were formulated by in situ reduction of gold within the low molecular weight gel matrix of synthetic glycolipid amphiphiles without using any external reducing/stabilizing agents. This strategy aroused the interest in formulating gel nanocomposites with preferential uptake of gold. The exclusive advantages owned by gold nanoparticle (GNP) embedded hydrogel offer an alternative to decorate the electrode surface without physical deposition/plating of the catalyst. Formation of GNP within the gel matrix was confirmed by the SPR peak in the UV-Visible spectrum. The particle size of 5-7 nm with zeta potential value in the range of -30.5 to -41.4 mV displayed good stability of nanoparticles in the gel matrix. Due to the encapsulation of nanoparticles within supramolecular assemblies of gel, a noteworthy increase in viscoelastic strength was observed, whereas the gelation behavior, melting temperature, and original fibrillar morphology of hydrogel remained intact. This hybrid gel exhibited good ionic conductivity (2.36 × 10-5 S cm-1) with appreciable ionic transport, remarkable oxygen reduction reaction (ORR) augmentation in reduction potential from 0 V to -0.12 V vs. Ag/AgCl as reference electrode, and excellent thermal stability in a wide temperature range. This green and efficient approach can pave the way for creating GNP-embedded hierarchical architecture that can act as bifunctional electrolyte/electrocatalyst material.

The Effect of Mineral Fertilization on the Content of Bioactive Compounds in Hemp Seeds and Oil

The popularity of hemp cultivation for industrial purposes has been steadily growing for many years. With the addition of products derived from these plants to the Novel Food Catalogue, maintained by the European Commission, a significant increase in interest in hemp food is also expected. The aim of the study was to determine the characteristics of hempseed, oil, and oil cake samples produced from experimental plots grown in different conditions. The research was conducted on the Henola variety, one of the newest and most popular varieties of hemp, recently bred for grain and oil. The content of bioactive compounds in grain and oil has been subjected to detailed chemical analyses in order to determine the effect of fertilization, the method of plant cultivation, and processing conditions on their quantity. The test results and the statistical analysis carried out showed a significant impact of the tested factors on the content of some of the tested bioactive compounds. The obtained results will help in the development of an effective method of cultivation for this hemp variety in order to maximize the content of the desired bioactive compounds per unit of cultivation area.

Complexation of turmeric and curcumin mediated silver nanoparticles with human serum albumin: Further investigation into the protein-corona formation, anti-bacterial effects and cell cytotoxicity studies

Biosynthesized noble metal nanoparticles have been of recent interest due to their broad implications in the future biomedicinal field. We have synthesized silver nanoparticle using turmeric-extract and its major component curcumin as reducing and stabilizing agents. Further, we have investigated the protein-NPs interaction focusing the inspection of the role of biosynthesized AgNPs on any conformational changes of the protein, binding and thermodynamic parameters using spectroscopic techniques. Fluorescence quenching studies revealed that both CUR-AgNPs and TUR-AgNPs have moderate binding affinities (∼10⁴ M^-1) towards human serum albumin (HSA) and static quenching mechanism was involved in the binding. Estimated thermodynamic parameters indicate the involvement of hydrophobic forces in the binding processes. The surface charge potential of the biosynthesized AgNPs became more negative upon complexation with HSA as observed from Zeta potential measurements. Antibacterial efficacies of the biosynthesized AgNPs were evaluated against Escherichia coli (gram-negative) and Enterococcus faecalis (gram-positive) bacterial strains. The AgNPs were found to destroy the cancer (HeLa) cell lines in vitro. The overall findings of our study successfully outline the detailed insight of the protein corona formation by biocompatible AgNPs and their biological applications concerning the future scope in the biomedicinal field.

A new strategy to integrate silver nanowires with waterborne coating to improve their antimicrobial and antiviral properties

Purpose

This study aims to focus on the preparation and characterization of the silver nanowire (AgNWs), as well as their application as antimicrobial and antivirus activities either with incorporation on the waterborne coating formulation or on their own.

Design/methodology/approach

Prepared AgNWs are characterized by different analytical instruments, such as ultraviolet-visible spectroscope, scanning electron microscope and X-ray diffraction spectrometer. All the paint formulation's physical and mechanical qualities were tested using American Society for Testing and Materials, a worldwide standard test procedure. The biological activities of the prepared AgNWs and the waterborne coating based on AgNWs were investigated. And, their effects on pathogenic bacteria, antioxidants, antiviral activity and cytotoxicity were also investigated.

Findings

The obtained results of the physical and mechanical characteristics of the paint formulation demonstrated the formulations' greatest performance, as well as giving good scrub resistance and film durability. In the antimicrobial activity, the paint did not have any activity against bacterial pathogen, whereas the AgNWs and AgNWs with paint have similar activity against bacterial pathogen with inhibition zone range from 10 to 14 mm. The development of antioxidant and cytotoxicity activity of the paint incorporated with AgNWs were also observed. The cytopathic effects of herpes simplex virus type 1 (HSV-1) were reduced in all three investigated modes of action when compared to the positive control group (HSV-1-infected cells), suggesting that these compounds have promising antiviral activity against a wide range of viruses, including DNA and RNA viruses.

Originality/value

The new waterborne coating based on nanoparticles has the potential to be promising in the manufacturing and development of paints, allowing them to function to prevent the spread of microbial infection, which is exactly what the world requires at this time.

Catalytic Amounts of an Antibacterial Monomer Enable the Upcycling of Poly(Ethylene Terephthalate) Waste

Poly(ethylene terephthalate) (PET) is an important polymer with an annual output second only to polyethylene. The development of PET recycling technologies is therefore necessary to not only eliminate the harm associated with white pollution and microplastics, but also to reduce carbon emissions. Antibacterial PET, one of the most high-value advanced materials, has improved the ability to treat bacterial infections. However, current methods of manufacturing commercial antibacterial PET require blending with an excess of metal-based antibacterial agents, which leads to biotoxicity and a nonpersistent antibacterial activity. In addition, high-efficiency organic antibacterial agents have yet to be employed in antibacterial PET due to their poor thermal stabilities. Herein, a solid-state reaction for the upcycling of PET waste using a novel hyperthermostable antibacterial monomer is described. This reaction is catalyzed by the residual catalyst present in the PET waste. It is found that a catalytic amount of the antibacterial monomer enabled the low-cost upcycling of PET waste to produce high-value recycled PET with a strong and persistent antibacterial activity, as well as similar thermal properties to the virgin PET. This work provides a feasible and economic strategy for the large-scale upcycling of PET waste and exhibits potential for application in the polymer industry.

A Facile and Rational Method to Tailor the Symmetry of Au@Ag Nanoparticles

Precisely controlling the morphologies of plasmonic metal nanoparticles (NPs) is of great importance for many applications. Here, a facile seed-mediated growth method is demonstrated that tailors the morphologies of Au@Ag NPs from cubes/cuboids to chiral truncated cuboids/octahedra, well-defined octahedra, and tetrahedra, via simply increasing the concentrations of AgNO₃  and cysteine in the halide surfactant systems. Accordingly, the particle symmetries are also tuned. The method is quite robust where seeds with distinct shapes including irregular ones can all lead to uniform Au@Ag NPs. The evolution of these shapes can be illustrated by a recently proposed symmetry-based kinematic theory (SBKT). Furthermore, SBKT shows a strategy to optimize the preparation of chiral/dissymmetric NPs, and the experimental results confirm such a dissymmetric synthesis strategy. Cuboids and octahedra with corners differently truncated are identified as two different chiral forms. The chirality of the NPs is additionally probed by electrochemistry, where the chiral NPs show enantioselectivity in the oxidation of d- and l-glucose. Altogether, the results gain fundamental insights into tailoring the plasmonic NP morphologies, and also suggest strategies to obtain chiral NPs.

Silver Nanoparticles as Antifungal Agents in Acrylic Latexes: Influence of the Initiator Type on Nanoparticle Incorporation and Aureobasidium pullulans Resistance

Discoloration of wood coatings due to fungal growth negatively affects the aesthetic properties of the coatings, and new ways to control fungal growth on coatings are needed. For this reason, silver nanoparticles (AgNPs) have been incorporated in acrylic latexes as antifungal agents. Using miniemulsion polymerization, latexes were prepared with two types of initiators (hydrophilic and hydrophobic) to assess the influence of the initiator type on AgNPs dispersion, both within the latex particles and the dry film. In addition, the impact of NP dispersion on resistance to black-stain fungi (Aureobasidium pullulans) was also evaluated. Inductively coupled plasma optical emission spectroscopy (ICP-OES) analysis indicates that acrylic latexes prepared with azobisisobutyronitrile (AIBN) as the initiator contain more AgNPs than those prepared with potassium persulfate (KPS). Cryo-TEM and SEM analyses show that the distribution of the AgNPs within the polymer particles is influenced by the nature of the initiator. When AIBN, a hydrophobic initiator, is used, the AgNPs appear to be closer to the surface of the polymer particles and more evenly distributed. However, the antifungal efficiency of the AgNPs-embedded latexes against A. pullulans is found to be higher when KPS is used, despite this initiator leading to a smaller amount of incorporated AgNPs and a less uniform dispersion of the nanoparticles.

Size-dependent antibacterial of carbon dots by selective absorption and differential oxidative stress of bacteria

Carbon dots (CDs), as one kind of zero-dimensional carbon-based nanomaterials, show great potential in combating emerging infectious diseases and antimicrobial infections. CDs with outstanding optical properties and benign biocompatibility have been reported as excellent antibacterial agents. However, few reports were focused on the relationship between the CDs' size and their antibacterial activity. Herein, the desired CDs (VCDs) were fabricated by a one-step electrochemical oxidation method using l-ascorbic acid as raw material, and four types of VCDs with different sizes were obtained by adjusting the reaction times. The effectiveness of antibacterial activity demonstrates the VCDs display size-dependent antibacterial activity, where the VCDs-2 (average size: 2.92 nm) exhibit superior antibacterial activity to others, attributing to the synergy of the absorption capacity of bacteria to VCDs and the ROS stimulated by VCDs. The VCDs-2 could more easily penetrate bacterial cells, stimulate the production of ROS, damage the cell walls of E. coli, and inhibit the growth and reproduction of bacteria. This work helps to understand the effect of CDs' size on antibacterial properties, and provides a direction for the design of novel antimicrobials with drug resistance.

Inkjet-printed 3D micro-ring-electrode arrays for amperometric nanoparticle detection

Chip-based impact electrochemistry can provide means to measure nanoparticles in solution by sensing their stochastic collisions on appropriately-polarized microelectrodes. However, a planar microelectrode array design still restricts the particle detection to the chip surface and does not allow detection in 3D environments. In this work, we report a fast fabrication process for 3D microelectrode arrays by combining ink-jet printing with laser-patterning. To this end, we printed 3D pillars from polyacrylate ink as a scaffold. Then, the metal structures are manufactured via sputtering and laser-ablation. Finally, the chip is passivated with a parylene-C layer and the electrode tips are created via laser-ablation in a vertical alignment. As a proof of principle, we employ our 3D micro-ring-electrode arrays for single impact recordings from silver nanoparticles.

Antibacterial one-step self-etching dental adhesive with silver nanoparticles synthesized in situ

OBJECTIVES

The objective of this study is to value the long-term antibacterial capability and adhesive properties of one-step self-etching dental adhesive containing silver nanoparticles (AgNPs) synthesized in situ.

METHODS

One-step self-etching adhesives with various weight percentages of silver 2-ethylhezanoate (0%, 0.05%, 0.10%, and 0.20%) were obtained by in-situ synthesis; the sizes and distribution of the AgNPs in resin were observed. The antibacterial effects of dentin-resin specimens were assessed by various test methods after being aged for 1 week to 1 year. The microtensile bond strength (μTBS) and interfacial nanoleakage (NL) were evaluated using extracted human teeth after being aged for 1 day and 1 year.

RESULTS

Uniform distribution of AgNPs in resin was observed in all experimental groups, and the average size was 4.71 nm-4.81 nm. All groups containing AgNPs showed significant antibacterial differences from the control group (P<0.05) over the ageing of 1 year. Although the increase of concentration tended to improve antibacterial activity, significant differences were not observed between the 0.10% and 0.20% groups (P>0.05). No significant differences were observed between all experimental groups and the control group in μTBS testing and NL testing at 1-day and 1-year time points (P>0.05).

CONCLUSIONS

0.10% AgNPs synthesized in situ might be appropriate to impart a long-term antibacterial ability to the one-step self-etching adhesive, without affecting its adhesive performance.

CLINICAL SIGNIFICANCE

This study suggests that in-situ synthesis of AgNPs is an effective method to improve the antibacterial ability of dental adhesives with the potential to inhibit secondary caries.

Chemical Characterization of Honey and Its Effect (Alone as well as with Synthesized Silver Nanoparticles) on Microbial Pathogens' and Human Cancer Cell Lines' Growth

The antibacterial, anticancer, and wound-healing effects of honey can vary according to the type, geographical region, honey bee species, and source of the flowers. Nanotechnology is an innovative and emerging field of science with an enormous potential role in medical, cosmetics, and industrial usages globally. Metal nanoparticles that derived from silver and range between 1 nm and 100 nm in size are called silver nanoparticles (AgNPs). Much advanced research AgNPs has been conducted due to their potential antibacterial and anticancer activity, chemical stability, and ease of synthesis. The purpose of the present study was to explore the physicochemical properties of honey and the potential to use forest honey to synthesize AgNPs as well as to appraise the nanoparticles' antimicrobial and anticancer effects. Here, we used three different percentages of forest honey (20%, 40%, and 80%) as biogenic mediators to synthesize AgNPs at room temperature. The development of AgNPs was confirmed by color change (to the naked eye) and ultraviolet-visible spectroscopy studies, respectively. The absorbance peak obtained between 464 to 4720 nm validated both the surface plasmon resonance (SPR) band and the formation of AgNPs. Regarding the sugar profile, the contents of maltose and glucose were lower than the content of fructose. In addition, the results showed that the SPR band of AgNPs increased as the percentage of forest honey increased due to the elevation of the concentration of the bio-reducing agent. A bacterial growth kinetic assay indicated the strong antibacterial efficacy of honey with silver nanoparticles against each tested bacterial strain. Honey with nanotherapy was the most effective against hepatocellular carcinoma (HepG2) and colon cancer (HCT 116) cells, with IC₅₀s of 23.9 and 27.4 µg/mL, respectively, while being less effective against breast adenocarcinoma cells (MCF-7), with an IC₅₀ of 32.5 µg/mL.

Prepared activated carbon from hazelnut shell where coated nanocomposite with Ag+ used for antibacterial and adsorption properties

In this research, prepared activated carbon by H₃PO₄ from hazelnut shells was coated with silver ions for the preparation of nanoparticles which were mixed in two ratios (1:0.5 and 1:1) by using of chemical reduction method. The adsorption capacity of activated carbons has been proven by BET and iodine number. Then, the antimicrobial effect of nanoparticles on the Staphylococcus aureus and Escherichia coli was investigated; in addition to that, the characterization of hazelnut shell and silver-coated activated carbons was determined by Brunauer-Emmett-Teller (BET), scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FT-IR), and X-ray diffraction (XRD) methods. The optimum condition of activated carbon from hazelnut shells indicated that 66.01% carbon content within 36.22% efficiency, while BET surface area achieved as 1208 m2/g and its contained 0.6104 cm3 g^-1 total pore volume. The microbial effect indicated that 105 CFU/mL of E. coli was completely inhibited in 30 min. Silver-coated activated carbon showed excellent bacteriostatic activity against E. coli and S. aureus. The results show that the composite has good prospects for applications in drinking water. E. coli of 10⁴ CFU/mL in drinking water were destroyed within 25 min of contact with the filter made with AgAC.

Advanced Plasmonic Nanoparticle-Based Techniques for the Prevention, Detection, and Treatment of Current COVID-19

Coronavirus is an ongoing global pandemic caused by severe acute respiratory syndrome coronavirus 2. Coronavirus disease 2019 known as COVID-19 is the worst pandemic since World War II. The outbreak of COVID-19 had a significant repercussion on the health, economy, politics, and environment, making coronavirus-related issues more complicated and becoming one of the most challenging pandemics of the last century with deadly outcomes and a high rate of the reproduction number. There are thousands of different types - or variants - of COVID circulating across the world. Viruses mutate all the time; it emphasizes the critical need for the designing of efficient vaccines to prevent virus infection, early and fast diagnosis, and effective antiviral and protective therapeutics. In this regard, the use of nanotechnology offers new opportunities for the development of novel strategies in terms of prevention, diagnosis, and treatment of COVID-19. This review presents an outline of the platforms developed using plasmonic nanoparticles in the detection, treatment, and prevention of SARS-CoV-2. We select the best strategies in each of these approaches. The properties of metallic plasmon NPs and their relevance in the development of novel point-of-care diagnosis approaches for COVID-19 are highlighted. Also, we discuss the current challenges and the future perspectives looking towards the clinical translation and the commercial aspects of nanotechnology and plasmonic NP-based diagnostic tools and therapy to fight COVID-19 pandemic. The article could be of significance for researchers dedicated to developing suitable plasmonic detection tools and therapy approaches for COVID-19 viruses and future pandemics.

A Novel Ag@AgCl Nanoparticle Synthesized by Arctic Marine Bacterium: Characterization, Activity and Mechanism

An additive- and pollution-free method for the preparation of biogenic silver and silver chloride nanoparticles (Ag@AgCl NPs) was developed from the bacteria Shewanella sp. Arc9-LZ, which was isolated from the deep sea of the Arctic Ocean. The optimal synthesizing conditions were explored, including light, pH, Ag⁺ concentration and time. The nanoparticles were studied by means of ultraviolet-visible (UV-Vis) spectrophotometry, energy dispersive spectrometry (EDS), X-ray diffraction (XRD) and inductively coupled plasma optical emission spectrometers (ICP-OES). The transmission electron microscope (TEM) showed that the nanoparticles were spherical and well dispersed, with particle sizes less than 20.00 nm. With Ag@AgCl nanoparticles, the kinetic rate constants for congo red (CR) and rhodamine B (RhB) dye degradation were 2.74 × 10^-1 min^-1 and 7.78 × 10^-1 min^-1, respectively. The maximum decolourization efficiencies of CR and RhB were 93.36% and 99.52%, respectively. Ag@AgCl nanoparticles also showed high antibacterial activities against the Gram-positive and Gram-negative bacteria. The Fourier transform infrared spectroscopy (FTIR) spectrum indicated that the O-H, N-H and -COO- groups in the supernatant of Arc9-LZ might participate in the reduction, stabilization and capping of nanoparticles. We mapped the schematic diagram on possible mechanisms for synthesizing Ag@AgCl NPs.

New systematic study approach of green synthesis CdS thin film via Salvia dye

In this study, we aimed to increase the knowledge regarding the response mechanisms which were associated with the formation of CdS thin films. CdS thin film remains the most appealing alternative for many researchers, as it has been a capable buffer material for effect in film based polycrystalline solar cells (CdTe, CIGSe, CZTS). The Linker Assisted and Chemical Bath Deposition (LA-CBD) technique, which combines the Linker Assisted (LA) technique and the chemical bath deposition (CBD) method for forming high quality CdS thin film, was presented as an efficient and novel hybrid sensitization technique. CdS films were bound to soda lime with the help of electrostatic forces, which led to the formation of the intermediate complexes [Cd (NH₃)₄]²⁺ that helped in the collision of these complexes with a soda lime slide. Salvia dye and as a linker molecule 3-Mercaptopropionic acid (MPA) was used in the one step fabrication technique. Optical results showed that the bandgap varied in the range of (2.50 to 2.17) eV. Morphological properties showed a homogeneous distribution of the particles that aspherical in shape in the CdS + MPA + Salvia dye films. This technique significantly affected on the electrical characterizations of CdS films after the annealing process. The CdS + Ag + MPA + Salvia dye films showed the maximum carrier concentration and minimum resistivity, as 5.64 × 10 ¹⁸ cm⁻³ and 0.83 Ω cm respectively.

Effect of light at different wavelengths on polyol synthesis of silver nanocubes

Despite the presence of light-sensitive species in the polyol synthesis of silver nanocubes, the influence of light on it has yet to be investigated. Herein, we demonstrated that light radiation, by generating plasmon-based hot electrons and subsequently increasing the reduction rate of Ag⁺ in the system, in addition to enhancing the growth rate of nanocubes, causes twinned seeds, which these seeds are then converted into nanorods and right bipyramids. With shorter, higher energy wavelengths, Ag⁺ reduction progresses more quickly, resulting in structures with more twin planes. The overlap of the excitation wavelength and the band gap of Ag₂S clusters formed in the early stages of synthesis accelerates the rate of reaction at low-energy excitation. According to our findings, the surfactant polyvinylpyrrolidone acts as a photochemical relay to drive the growth of silver nanoparticles. Overall, this work emphasizes the impact of excitation light on polyol synthesis as a technique for generating Ag nanocubes of various sizes.

Permanent, Antimicrobial Coating to Rapidly Kill and Prevent Transmission of Bacteria, Fungi, Influenza, and SARS-CoV-2

Microbial adhesion and contamination on shared surfaces can lead to life-threatening infections with serious impacts on public health, economy, and clinical practices. The traditional use of chemical disinfectants for sanitization of surfaces, however, comes with its share of health risks, such as hazardous effects on the eyes, skin, and respiratory tract, carcinogenicity, as well as environmental toxicity. To address this, we have developed a nonleaching quaternary small molecule (QSM)-based sprayable coating which can be fabricated on a wide range of surfaces such as nylon, polyethylene, surgical mask, paper, acrylate, and rubber in a one-step, photocuring technique. This contact-active coating killed pathogenic bacteria and fungi including drug-resistant strains of Staphylococcus aureus and Candida albicans within 15-30 min of contact. QSM coatings withstood multiple washes, highlighting their durability. Interestingly, the coated surfaces exhibited rapid killing of pathogens, leading to the prevention of their transmission upon contact. The coating showed membrane disruption of bacterial cells in fluorescence and electron microscopic investigations. Along with bacteria and fungi, QSM-coated surfaces also showed the complete killing of high loads of influenza (H1N1) and SARS-CoV-2 viruses within 30 min of exposure. To our knowledge, this is the first report of a coating for multipurpose materials applied in high-touch public places, hospital equipment, and clinical consumables, rapidly killing drug-resistant bacteria, fungi, influenza virus, and SARS-CoV-2.

Engineering Antimicrobial Polymer Nanocomposites: In Situ Synthesis, Disruption of Polymicrobial Biofilms, and In Vivo Activity

The increasing incidence of microbial infections and a limited arsenal of effective antibacterial and antifungal agents have entailed the need for new broad-spectrum therapeutics. Polymer-inorganic nanocomposites have emerged as an integral choice of antimicrobials but are limited by complicated synthesis, narrow-spectrum activity, and poor in vivo efficacy. Herein, chloride counterions of a nontoxic, moderately antibacterial polymer have been explored for in situ nanoprecipitation-based synthesis of water-soluble polymer-silver chloride nanocomposites. With the controlled release of silver ions, the nanocomposites were highly active against multidrug-resistant bacteria as well as fluconazole-resistant fungi. Alongside the elimination of metabolically inactive bacterial cells, the nanocomposites disrupted polymicrobial biofilms, unlike antibiotics and only silver-based ointments. This underlined the role of the engineered composite design, where the polymer interacted with the biofilm matrix, facilitating the penetration of nanoparticles to kill microbes. Further, the nanocomposite diminished Pseudomonas aeruginosa burden in mice skin infection (>99.9%) with no dermal toxicity proving its potential for clinical translation.

Synthesis and Biological Characterization of Phyto-Fabricated Silver Nanoparticles from Azadirachta indica

Nanoparticles (NPs) have garnered a lot of interest in sectors like medicine, cosmetics, food, and pharmaceuticals for antibacterial catalytic properties, reduced toxicity, and easy production. Biological synthesis of silver nanoparticle (AgNPs) is considered as green, eco-friendly, and cost-effective approach; therefore, Azadirachta indica extracts were utilized for a dual role of fabrication and functionalization of AgNPs. Optical and physical characterizations were achieved for confirming the biosynthesized AgNPs. SEM images detected quasi-spherical AgNPs of 44.04 to 66.50 nm. Some of potent phytochemicals like flavonoids and proteins from Azadirachta indica formed a strong coating or capping on the AgNPs without affecting their secondary structure by interacting with Ag+ and NPs for the formation of AgNPs. AgNPs exhibited strong antibacterial activity (MIC 10 μg/ml) against multidrug-resistant bacteria Enterococcus faecalis; at different concentrations, no IC50 values were recorded for AgNPs as well as Azadirachta indica signifying low cytotoxicity in the exposed concentration range. The DNA degradation activity of AgNPs through the TUNEL assay revealed no significant increase in the overall FITC mean fluorescence intensity as well as a DNA fragmentation index with 5.45% DNA damage (10 μg/ml AgNPs). Drug uptake of AgNPs was also investigated through a permeability assay via Caco-2 cell lines at test concentrations where apparent permeability was detected as moderate.

Effect of Biosynthesized Silver Nanoparticles on Bacterial Biofilm Changes in S. aureus and E. coli

One approach for solving the problem of antibiotic resistance and bacterial persistence in biofilms is treatment with metals, including silver in the form of silver nanoparticles (AgNPs). Green synthesis is an environmentally friendly method to synthesize nanoparticles with a broad spectrum of unique properties that depend on the plant extracts used. AgNPs with antibacterial and antibiofilm effects were obtained using green synthesis from plant extracts of Lagerstroemia indica (AgNPs_LI), Alstonia scholaris (AgNPs_AS), and Aglaonema multifolium (AgNPs_AM). Nanoparticles were characterized by transmission electron microscopy (TEM) and energy-dispersive X-ray spectroscopy (EDX) analysis. The ability to quench free radicals and total phenolic content in solution were also evaluated. The antibacterial activity of AgNPs was studied by growth curves as well as using a diffusion test on agar medium plates to determine minimal inhibitory concentrations (MICs). The effect of AgNPs on bacterial biofilms was evaluated by crystal violet (CV) staining. Average minimum inhibitory concentrations of AgNPs_LI, AgNPs_AS, AgNPs_AM were 15 ± 5, 20 + 5, 20 + 5 μg/mL and 20 ± 5, 15 + 5, 15 + 5 μg/mL against Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria, respectively. The E. coli strain formed biofilms in the presence of AgNPs, a less dense biofilm than the S. aureus strain. The highest inhibitory and destructive effect on biofilms was exhibited by AgNPs prepared using an extract from L. indica.

Breaking the nanoparticle's dispersible limit via rotatable surface ligands

Achieving versatile dispersion of nanoparticles in a broad range of solvents (e.g., water, oil, and biofluids) without repeatedly recourse to chemical modifications are desirable in optoelectronic devices, self-assembly, sensing, and biomedical fields. However, such a target is limited by the strategies used to decorate nanoparticle's surface properties, leading to a narrow range of solvents for existing nanoparticles. Here we report a concept to break the nanoparticle's dispersible limit via electrochemically anchoring surface ligands capable of sensing the surrounding liquid medium and rotating to adapt to it, immediately forming stable dispersions in a wide range of solvents (polar and nonpolar, biofluids, etc.). Moreover, the smart nanoparticles can be continuously electrodeposited in the electrolyte, overcoming the electrode surface-confined low throughput limitation of conventional electrodeposition methods. The anomalous dispersive property of the smart Ag nanoparticles enables them to resist bacteria secreted species-induced aggregation and the structural similarity of the surface ligands to that of the bacterial membrane assists them to enter the bacteria, leading to high antibacterial activity. The simple but massive fabrication process and the enhanced dispersion properties offer great application opportunities to the smart nanoparticles in diverse fields.

Levonorgestrel-protected Au8 and Au10 clusters with different antimicrobial abilities

Gold nanoclusters exhibit significant potential in antimicrobial applications due to their good stability and desirable biocompatibility in the mammalian cell model. However, most of the previously reported gold nanocluster antimicrobial agents do not have an atomic-precise structure, causing difficulties in understanding the structure-property correlation. In this study, structurally defined gold-levonorgestrel clusters, named Au₈(C₂₁H₂₇O₂)₈ (Au₈NCs) and Au₁₀(C₂₁H₂₇O₂)₁₀ (Au₁₀NCs), with the same ligand-to-metal ratio but different inner cores were prepared for antibacterial activity investigations, demonstrating that Au₈NCs exhibited a stronger antibacterial activity owing to the more significant damage it causes on the bacteria wall and membrane, and a stronger inhibition of glutathione reductase activity in bacteria. The leakage of the intracellular components and enzyme inhibition caused an imbalance of the intracellular antioxidant defence system, and consequently killed bacteria. These results indicated that the structure of gold nanoclusters has an important effect on their biological activity, indicating that it as a key factor to consider in the future design of antimicrobial agents.

An easy-to-use antimicrobial hydrogel effectively kills bacteria, fungi, and influenza virus

Various drug resistant pathogens such as bacteria, fungi and viruses enter a host through different routes, which can lead to health-related problems and even fatalities. Propagation of these infectious microbes majorly occurs through the mucosal openings or upon topical contact. To curb their transmission or to cure infections associated with these pathogens, herein we describe the development of an antimicrobial hydrogel, based on a water soluble quaternary lipophilic polyethyleneimine derivative (QPEINH-C₆). The cationic polymer QPEINH-C₆ exhibited antibacterial activity against drug-resistant Gram-positive bacteria (MIC = 10-62 μg mL^-1) and Gram-negative bacteria (MIC = 117-123 μg mL^-1). The derivative showed killing of human pathogenic fungi (MIC = 58-67 μg mL^-1), including their clinical isolates. The rapid bactericidal and fungicidal nature were confirmed from the fast inactivation kinetics of bacterial cells (methicillin resistant S. aureus and vancomycin resistant S. aureus) within 3-6 hours and C. albicans within 1 h with ∼5-6 log reduction in the microbial burden. This antibacterial and antifungal cationic polymer was then used to construct an antimicrobial shear-thinning hydrogel (Bacfuvir), through non-covalent crosslinking with biocompatible gellan and polyvinyl alcohol (PVA). This hydrogel displayed ∼5-7 log reduction of numerous multidrug-resistant bacteria and their stationary phase cells which are insusceptible to conventional antibiotics. In addition, >99.9 % viable bacterial burden was reduced from preformed biofilm matrices of drug-resistant bacteria. Alongside, fluconazole-resistant C. albicans strains were killed completely within 15-60 min upon exposure to Bacfuvir gel. Most importantly, MRSA and C. albicans cells were reduced (3-4 log) in polymicrobial biofilms after hydrogel treatment. The hydrogel exhibited 99.9 % reduction of influenza viruses in a rapid manner. Due to the biocompatibility of Bacfuvir gel on topical application in a murine model and easy administration owing to its shear-thinning behaviour, this hydrogel can markedly contribute to mitigating drug-resistant bacterial, fungal and viral infections in healthcare settings.

Bactericidal activity of immobilized silver nanoparticles on silica substrates with different sizes

Hybrid particles with immobilized silver nanoparticles (AgNPs) receive a lot of attention due to their excellent antibacterial activity with the prevention of inherent aggregation of AgNPs. In this study, serial sized silica substrate particles (231, 401, and 605 nm) and their corresponding hybrid particles with AgNPs (~ 30 nm) are prepared, with detailed bactericidal images of the corresponding particles at various times. Their bactericidal activity is elucidated for both Gram-positive Streptococcus agalactiae and Gram-negative Escherichia coli CN13, which show the size of 0.8 μm × 0.9 μm and 1.3 μm × 1.8 μm, respectively. There is a large difference in the bactericidal activity between the smallest (231 nm, 3-log₁₀ reduction) and larger (401 and 605 nm, 6-log₁₀ reduction) silica substrates, whereas there is hardly a difference between the latter. Their effective total surface area (ETSA) is considered important for their bactericidal activity, based on the nearly equal large ETSA of the well-dispersed two larger silica substrates and the much smaller ETSA of the agglomerated smallest substrates. Submicron-sized pits appear on the bacterial membrane by direct contact with the hybrid particles, implicating the importance of ETSA. Still, further research is needed with much different silica substrate sizes to fully elucidate the impact of the silica substrate on the bactericidal activity of immobilized AgNPs.

Advanced metal and carbon nanostructures for medical, drug delivery and bio-imaging applications

Nanoparticles (NPs) offer great promise for biomedical, environmental, and clinical applications due to their several unique properties as compared to their bulk counterparts. In this review article, we overview various types of metal NPs and magnetic nanoparticles (MNPs) in monolithic form as well as embedded into polymer matrices for specific drug delivery and bio-imaging fields. The second part of this review covers important carbon nanostructures that have gained tremendous attention recently in such medical applications due to their ease of fabrication, excellent biocompatibility, and biodegradability at both cellular and molecular levels for phototherapy, radio-therapeutics, gene-delivery, and biotherapeutics. Furthermore, various applications and challenges involved in the use of NPs as biomaterials are also discussed following the future perspectives of the use of NPs in biomedicine. This review aims to contribute to the applications of different NPs in medicine and healthcare that may open up new avenues to encourage wider research opportunities across various disciplines.

Bi2O3 nanoparticles exhibit potent broad-spectrum antimicrobial activity and the ability to overcome Ag-, ciprofloxacin- and meropenem-resistance in P. aeruginosa: the next silver bullet of metal antimicrobials?

Antimicrobial resistance is a persistent threat to global public health. In order to combat the spread of pathogenic bacteria, numerous antimicrobial materials have been incorporated into wound dressings and medical devices such as implants and catheters. The most frequently utilized of these materials are Ag-salts and Ag-nanoparticles (AgNPs) due to their low minimum inhibitory concentrations (MICs) against common Gram-negative pathogenic bacteria such as P. aeruginosa. However, such Ag-based materials are limited to treating Gram-negative bacteria and prone to generating Ag-resistant phenotypes after only 7 consecutive exposures to these materials at a sub-inhibitory concentration. Here, we demonstrate α-Bi2O3 NPs as potential replacements for such materials, i.e., α-Bi2O3 NPs that exhibit potent broad-spectrum antibacterial activity (MIC = 0.75 μg mL-1 against P. aeruginosa; MIC = 2.5 μg mL-1 against S. aureus). Furthermore, these NPs are effective against Ag-resistant and carbapenem-resistant bacteria (MICs = 1.0 μg mL-1 and 1.25 μg mL-1, respectively) and also show a synergistic effect with meropenem (mero) in P. aeruginosa bacteria, allowing for the use of meropenem with smaller therapeutic doses (fractional inhibitory concentration = 0.45). Finally, unlike other materials that have been explored as effective antimicrobials, α-Bi2O3 NPs do not contribute to the development of Bi-resistant phenotypes after 30 passages of consecutive exposure to a sub-lethal dose of such NPs. Our results demonstrate that Bi-based materials represent a critical tool against multidrug resistant bacteria and require greater attention within the community. We anticipate this study to inspire broader investigation into the use of other metal oxides as antimicrobial materials, particularly those that limit the development of resistant phenotypes.

In-situ synthesis of metal nanoparticle embedded soft hybrid materials via eco-benign approach

The unique optical and electronic properties of metal nanoparticles and tunable properties of the organic templates encourage the scientific community to generate metal nanoparticle embedded soft hybrid materials for various novel utilities. Here, we discuss the in-situ synthesis of metal nanoparticle embedded soft hybrid materials via eco-benign approach which exclude the use of toxic reducing/capping agents or toxic reaction media. In this protocol, the gel matrix composed of benign organic templates act as reducing as well as stabilizing agent for the in-situ generation and stabilization of metal nanoparticles. As the incorporation of metal salts (as nanoparticle precursor) in the gel medium is required in this process, in most of the cases aqueous media were used for the generation of metal nanoparticle embedded soft hybrid materials. This discussion includes interesting findings from our laboratory where hybrid gel matrix composed of renewable chemicals was utilized for the in-situ synthesis of palladium nanoparticle embedded soft trihybrid material. The hybrid gel matrix rich in polyphenols/flavonoids was exploited to generate palladium nanoparticle embedded trihybrid gel through in-situ reduction of doped Pd (II) salts to stable PdNPs. The xerogel of this trihybrid material was utilized as recyclable heterogeneous catalyst for C-C coupling reaction in air under phosphene free condition and reduction reaction.

Polymeric Biomaterials for Prevention and Therapeutic Intervention of Microbial Infections

The escalating emergence of multidrug-resistant (MDR) pathogens and their ability to colonize into biofilms on a multitude of surfaces have struck global health as a nightmare. The stagnation in the development of antibiotics and the deterioration of clinical pipelines have incited an invigorating search for smart and innovative alternatives in the scientific community. Further, a steep rise in the usage of biomedical devices and implants has resulted in an accelerated occurrence of infections. Toward the goal of mitigation of the aforementioned challenges, antimicrobial polymers have stood out as an astounding option. In this perspective, we highlight our contribution to the field of polymeric biomaterials for tackling antimicrobial resistance (AMR) and infections. Polymers inspired from antimicrobial peptides (AMPs) have been utilized as therapeutic interventions to curb MDR infections and also to rejuvenate obsolete antibiotics. Further, cationic polymers have been used to impart antimicrobial properties to different biomedical surfaces. These cationic polymer-coated surfaces can inactivate pathogens upon contact as well as prevent their biofilm formation. In addition, antimicrobial hydrogels, which are prepared from either inherently antimicrobial polymers or biocide-loaded polymeric hydrogel matrices, have also been engineered. With a brief overview of the progress in the field, detailed elaboration of the polymeric biomaterials for prevention and therapeutic intervention of microbial infections developed by our group is presented. Finally, the challenges in the field of antimicrobial polymers with discussion on the proceedings of polymeric research to alleviate these challenges are discussed.

Aggregatimonas sangjinii gen. nov., sp. nov., a novel silver nanoparticle synthesizing bacterium belonging to the family Flavobacteriaceae

Microbially synthesized nanoparticles has received increasing attentions owing to the broad applications in biology and medicine. In this study, we report a novel bacterium that biologically generates silver nanoparticles (AgNPs). This bacterium, designated strain F202Z8^T, was isolated from a rusty iron plate found in the intertidal region of Taean, South Korea. The morphological, biochemical and molecular characteristics predicted that strain F202Z8^T belongs to the family Flavobacteriaceae. Phylogenetic analysis based on 16S rRNA gene sequence revealed that strain F202Z8^T forms a distinct lineage with closely related genera Maribacter, Pelagihabitans, Pseudozobellia, Zobellia, Pricia, and Costertonia and showed the highest similarity to Maribacter aestuarii GY20^T (94.5%). The digital DNA-DNA hybridization and average nucleotide identity values calculated from the whole genome-sequence comparison between strain F202Z8^T and other members of the family Flavobacteriaceae were in the ranges of 12.7%-16.9% and 70.3%-74.4%, respectively, suggesting that strain F202Z8^T represented a novel genus. The complete genome sequence of strain F202Z8^T is 4,723,614 bp, with 43.26% G + C content. Based on the COG, GO, KEGG, NR, and Swiss-Prot databases, the genomic analysis of F202Z8^T revealed the presence of 17 putative genes responsible for the synthesis of AgNPs. Our polyphasic taxonomic results suggested that this strain represents a novel species of a novel genus in the family Flavobacteriaceae, for which the name Aggregatimonas sangjinii gen. nov., sp. nov. is proposed. The type strain of Aggregatimonas sangjinii is F202Z8^T (= KCCM 43411^T = LMG 31494^T). Overall, our data provide fundamental information to potentially utilize this novel bacterium for synthesis of nanoparticles.

d-Mannitol based surfactants for cosmetic and food applications and hydrogels to produce stabilized Ag nanoparticles

A novel synthetic approach for lipid modification of mannitol for hydrogelation, cosmetic and food application.

Metal and Metal Oxide Nanoparticles in Caries Prevention: A Review

Nanoparticles based on metal and metallic oxide have become a novel trend for dental use as they interfere with bacterial metabolism and prevent biofilm formation. Metal and metal oxide nanoparticles demonstrate significant antimicrobial activity by metal ion release, oxidative stress induction and non-oxidative mechanisms. Silver, zinc, titanium, copper, and magnesium ions have been used to develop metal and metal oxide nanoparticles. In addition, fluoride has been used to functionalise the metal and metal oxide nanoparticles. The fluoride-functionalised nanoparticles show fluoride-releasing properties that enhance apatite formation, promote remineralisation, and inhibit demineralisation of enamel and dentine. The particles' nanoscopic size increases their surface-to-volume ratio and bioavailability. The increased surface area facilitates their mechanical bond with tooth tissue. Therefore, metal and metal oxide nanoparticles have been incorporated in dental materials to strengthen the mechanical properties of the materials and to prevent caries development. Another advantage of metal and metal oxide nanoparticles is their easily scalable production. The aim of this study is to provide an overview of the use of metal and metal oxide nanoparticles in caries prevention. The study reviews their effects on dental materials regarding antibacterial, remineralising, aesthetic, and mechanical properties.

Corrosion Resistance of Sulfur-Selenium Alloy Coatings

Despite decades of research, metallic corrosion remains a long-standing challenge in many engineering applications. Specifically, designing a material that can resist corrosion both in abiotic as well as biotic environments remains elusive. Here a lightweight sulfur-selenium (S-Se) alloy is designed with high stiffness and ductility that can serve as an excellent corrosion-resistant coating with protection efficiency of ≈99.9% for steel in a wide range of diverse environments. S-Se coated mild steel shows a corrosion rate that is 6-7 orders of magnitude lower than bare metal in abiotic (simulated seawater and sodium sulfate solution) and biotic (sulfate-reducing bacterial medium) environments. The coating is strongly adhesive, mechanically robust, and demonstrates excellent damage/deformation recovery properties, which provide the added advantage of significantly reducing the probability of a defect being generated and sustained in the coating, thus improving its longevity. The high corrosion resistance of the alloy is attributed in diverse environments to its semicrystalline, nonporous, antimicrobial, and viscoelastic nature with superior mechanical performance, enabling it to successfully block a variety of diffusing species.

Physically Switchable Antimicrobial Surfaces and Coatings: General Concept and Recent Achievements

Bacterial environmental colonization and subsequent biofilm formation on surfaces represents a significant and alarming problem in various fields, ranging from contamination of medical devices up to safe food packaging. Therefore, the development of surfaces resistant to bacterial colonization is a challenging and actively solved task. In this field, the current promising direction is the design and creation of nanostructured smart surfaces with on-demand activated amicrobial protection. Various surface activation methods have been described recently. In this review article, we focused on the "physical" activation of nanostructured surfaces. In the first part of the review, we briefly describe the basic principles and common approaches of external stimulus application and surface activation, including the temperature-, light-, electric- or magnetic-field-based surface triggering, as well as mechanically induced surface antimicrobial protection. In the latter part, the recent achievements in the field of smart antimicrobial surfaces with physical activation are discussed, with special attention on multiresponsive or multifunctional physically activated coatings. In particular, we mainly discussed the multistimuli surface triggering, which ensures a better degree of surface properties control, as well as simultaneous utilization of several strategies for surface protection, based on a principally different mechanism of antimicrobial action. We also mentioned several recent trends, including the development of the to-detect and to-kill hybrid approach, which ensures the surface activation in a right place at a right time.

Antimicrobial coatings for environmental surfaces in hospitals: a potential new pillar for prevention strategies in hygiene

Recent reports provide evidence that contaminated healthcare environments represent major sources for the acquisition and transmission of pathogens. Antimicrobial coatings (AMC) may permanently and autonomously reduce the contamination of such environmental surfaces complementing standard hygiene procedures. This review provides an overview of the current status of AMC and the demands to enable a rational application of AMC in health care settings. Firstly, a suitable laboratory test norm is required that adequately quantifies the efficacy of AMC. In particular, the frequently used wet testing (e.g. ISO 22196) must be replaced by testing under realistic, dry surface conditions. Secondly, field studies should be mandatory to provide evidence for antimicrobial efficacy under real-life conditions. The antimicrobial efficacy should be correlated to the rate of nosocomial transmission at least. Thirdly, the respective AMC technology should not add additional bacterial resistance development induced by the biocidal agents and co- or cross-resistance with antibiotic substances. Lastly, the biocidal substances used in AMC should be safe for humans and the environment. These measures should help to achieve a broader acceptance for AMC in healthcare settings and beyond. Technologies like the photodynamic approach already fulfil most of these AMC requirements.

Nanomaterial-Based Antifungal Therapies to Combat Fungal Diseases Aspergillosis, Coccidioidomycosis, Mucormycosis, and Candidiasis

Over the last years, invasive infections caused by filamentous fungi have constituted a serious threat to public health worldwide. Aspergillus, Coccidioides, Mucorales (the most common filamentous fungi), and Candida auris (non-filamentous fungus) can cause infections in humans. They are able to cause critical life-threatening illnesses in immunosuppressed individuals, patients with HIV/AIDS, uncontrolled diabetes, hematological diseases, transplantation, and chemotherapy. In this review, we describe the available nanoformulations (both metallic and polymers-based nanoparticles) developed to increase efficacy and reduce the number of adverse effects after the administration of conventional antifungals. To treat aspergillosis and infections caused by Candida, multiple strategies have been used to develop new therapeutic alternatives, such as incorporating coating materials, complexes synthesized by green chemistry, or coupled with polymers. However, the therapeutic options for coccidioidomycosis and mucormycosis are limited; most of them are in the early stages of development. Therefore, more research needs to be performed to develop new therapeutic alternatives that contribute to the progress of this field.