Complete prevention of blood loss with self-sealing haemostatic needles

Full life cycle green preparation of collagen-based food packaging films using Halocynthia roretzi as raw material

The extraction of collagen for packaging films typically requires a time-consuming process and the use of substantial chemicals. Herein, we present a full life cycle green preparation method for rapidly producing collagen-based food packaging films using Halocynthia roretzi (HR), a collagen-rich marine organism, as raw material. We first prepared the micro/nano-sized collagen fibers from HR tissue by utilizing urea and sonication as effective hydrogen-bond breakers. Subsequently, the collagen fiber was rapidly fabricated into a film through vacuum filtration. The resulting collagen fiber film (CFF) exhibited a uniform and dense surface, along with good tensile properties, water resistance, and biodegradability. In addition, the deposition of chitosan (CS) on the surface of CFF resulted in a remarkable preservation effect for both strawberries and pork. This full life cycle preparation method for collagen-based films provides a promising and innovative approach to the sustainable preparation of food packaging films.

An artificial liquid-liquid phase separation-driven silk fibroin-based adhesive for rapid hemostasis and wound sealing

The powerful adhesion systems of marine organisms have inspired the development of artificial protein-based bioadhesives. However, achieving robust wet adhesion using artificial bioadhesives remains technically challenging because the key element of liquid-liquid phase separation (LLPS)-driven complex coacervation in natural adhesion systems is often ignored. In this study, mimicking the complex coacervation phenomenon of marine organisms, an artificial protein-based adhesive hydrogel (SFG hydrogel) was developed by adopting the LLPS-mediated coacervation of the natural protein silk fibroin (SF) and the anionic surfactant sodium dodecylbenzene sulfonate (SDBS). The assembled SF/SDBS complex coacervate enabled precise spatial positioning and easy self-adjustable deposition on irregular substrate surfaces, allowing for tight contact. Spontaneous liquid-to-solid maturation promoted the phase transition of the SF/SDBS complex coacervate to form the SFG hydrogel in situ, enhancing its bulk cohesiveness and interfacial adhesion. The formed SFG hydrogel exhibited intrinsic advantages as a new type of artificial protein-based adhesive, including good biocompatibility, robust wet adhesion, rapid blood-clotting capacity, and easy operation. In vitro and in vivo experiments demonstrated that the SFG hydrogel not only achieved instant and effective hemostatic sealing of tissue injuries but also promoted wound healing and tissue regeneration, thus advancing its clinical applications. STATEMENT OF SIGNIFICANCE: Marine mussels utilize the liquid-liquid phase separation (LLPS) strategy to induce the supramolecular assembly of mussel foot proteins, which plays a critical role in strong underwater adhesion of mussel foot proteins. Herein, an artificial protein-based adhesive hydrogel (named SFG hydrogel) was reported by adopting the LLPS-mediated coacervation of natural protein silk fibroin (SF) and anionic surfactant sodium dodecylbenzene sulfonate (SDBS). The assembled SFG hydrogel enabled the precise spatial positioning and easy self-adjustable deposition on substrate surfaces with irregularities, allowing tight interfacial adhesion and cohesiveness. The SFG hydrogel not only achieved instant and effective hemostatic sealing of tissue injuries but also promoted wound healing and tissue regeneration, exhibiting intrinsic advantages as a new type of artificial protein-based bioadhesives.

A dynamically cross-linked catechol-grafted chitosan/gelatin hydrogel dressing synergised with photothermal therapy and baicalin reduces wound infection and accelerates wound healing

Superior multifunctional hydrogel dressings are of considerable interest in wound healing. In clinical practice, it is useful to investigate hydrogel dressings that offer multifunctional benefits to expedite the process of wound healing. In this study, Catechol-grafted Chitosan, Gelatin, and Fe3+ as substrates to construct a hydrogel network. The network was dynamically cross-linked to form Ccg@Fe hydrogel substrate. Fe3O4 nanoparticles and baicalin, which possess antimicrobial and anti-inflammatory properties, were loaded onto the substrate to form a photothermal antibacterial composite hydrogel dressing (Ccg@Fe/Bai@Fe3O4 NPs). The Ccg@Fe hydrogel was characterised using Fourier transform infrared spectroscopy (FTIR) and Ultraviolet-visible spectrophotometry (UV-Vis). The morphological, mechanical, and adhesion properties of the hydrogel were determined using scanning electron microscopy (SEM) and a universal testing machine. The hydrogel's swelling, hemostasis, and self-healing properties were also evaluated. Additionally, the study determined the release rate of hydrogel-loaded antimicrobial and anti-inflammatory Baicalin (Ccg@Fe/Bai) and evaluated the photothermal antimicrobial properties of hydrogel-loaded Fe3O4 nanoparticles (Ccg@Fe/Bai@Fe3O4 NPs) through synergistic photothermal therapy (PTT). Histological staining of mice skin wound tissues using Masson and H&E revealed that the Ccg@Fe/Bai@Fe3O4 NPs hydrogel dressing demonstrated potential healing ability with the aid of PTT. The study suggests that this multifunctional hydrogel dressing has great potential for wound healing.

Silk fibroin-based hemostatic powders with instant and robust adhesion performance for sutureless sealing of gastrointestinal defects

Powder-based hemostatic technology has offered unprecedented opportunities in surgical sealing and repair of irregularly shaped and noncompressible wounds. Despite their routine use, existing clinical hemostatic powders are challenged either by poor mechanical properties or inadequate adhesion to bleeding tissues in biological environments. Here, inspired by the mussel foot proteins' fusion assembly strategy, a novel silk fibroin-based hemostatic powder (named as SF/PEG/TA) with instant and robust adhesion performance is developed. Upon absorbing interfacial liquids, the SF/PEG/TA powders rapidly swell into micro-gels and subsequently contact with each other to transform into a macroscopically homogeneous hydrogel in situ, strengthening its interfacial bonding with various substrates in fluidic environments. The in vitro and in vivo results show that the SF/PEG/TA powder possesses ease of use, good biocompatibility, strong antibacterial activities, and effective blood clotting abilities. The superior hemostatic sealing capability of the SF/PEG/TA powder is demonstrated in the rat liver, heart, and gastrointestinal injury models. Moreover, in vivo investigation of rat skin incision and gastrointestinal perforation models validates that the SF/PEG/TA powder promotes wound healing and tissue regeneration. Taken together, compared to existing clinical hemostatic powders, the proposed SF/PEG/TA powder with superior wound treatment capabilities has high potential for clinical hemostasis and emergency rescue.

Coagulant Protein-Free Blood Coagulation Using Catechol-Conjugated Adhesive Chitosan/Gelatin Double Layer

Since the discovery of polyphenolic underwater adhesion in marine mussels, researchers strive to emulate this natural phenomenon in the development of adhesive hemostatic materials. In this study, bio-inspired hemostatic materials that lead to pseudo-active blood coagulation, utilizing traditionally passive polymer matrices of chitosan and gelatin are developed. The two-layer configuration, consisting of a thin, blood-clotting catechol-conjugated chitosan (CHI-C) layer and a thick, barrier-functioning gelatin (Geln) ad-layer, maximizes hemostatic capability and usability. The unique combination of coagulant protein-free condition with CHI-C showcases not only coagulopathy-independent blood clotting properties (efficacy) but also exceptional clinical potential, meeting all necessary biocompatibility evaluation (safety) without inclusion of conventional coagulation triggering proteins such as thrombin or fibrinogen. As a result, the CHI-C/Geln is approved by the Ministry of Food and Drug Safety (MFDS, Republic of Korea) as a class II medical device. Hemostatic efficacy observed in multiple animal models further demonstrates the superiority of CHI-C/Geln sponges in achieving quick hemostasis compared to standard treatments. This study not only enriches the growing body of research on mussel-inspired materials but also emphasizes the potential of biomimicry in developing advanced medical materials, contributing a promising avenue toward development of readily accessible and affordable hemostatic materials.

Strain-Programmed Adhesive Patch for Accelerated Photodynamic Wound Healing

As an alternative to tissue adhesives, photochemical tissue bonding is investigated for advanced wound healing. However, these techniques suffer from relatively slow wound healing with bleeding and bacterial infections. Here, the versatile attributes of afterglow luminescent particles (ALPs) embedded in dopamine-modified hyaluronic acid (HA-DOPA) patches for accelerated wound healing are presented. ALPs enhance the viscoelastic properties of the patches, and the photoluminescence and afterglow luminescence of ALPs maximize singlet oxygen generation and collagen fibrillogenesis for effective healing in the infected wounds. The patches are optimized to achieve the strong and rapid adhesion in the wound sites. In addition, the swelling and shrinking properties of adhesive patches contribute to a nonlinear behavior in the wound recovery, playing an important role as a strain-programmed patch. The protective patch prevents secondary infection and skin adhesion, and the patch seamlessly detaches during wound healing, enabling efficient residue clearance. In vitro, in vivo, and ex vivo model tests confirm the biocompatibility, antibacterial effect, hemostatic capability, and collagen restructuring for the accelerated wound healing. Taken together, this research collectively demonstrates the feasibility of HA-DOPA/ALP patches as a versatile and promoting solution for advanced accelerated wound healing, particularly in scenarios involving bleeding and bacterial infections.

In Situ Polymerization of Hydrogel Electrolyte on Electrodes Enabling the Flexible All-Hydrogel Supercapacitors with Low-Temperature Adaptability

All-hydrogel supercapacitors are emerging as promising power sources for next-generation wearable electronics due to their intrinsic mechanical flexibility, eco-friendliness, and enhanced safety. However, the insufficient interfacial adhesion between the electrode and electrolyte and the frozen hydrogel matrices at subzero temperatures largely limit the practical applications of all-hydrogel supercapacitors. Here, an all-hydrogel supercapacitor is reported with robust interfacial contact and anti-freezing property, fabricated by in situ polymerizing hydrogel electrolyte onto hydrogel electrodes. The robust interfacial adhesion is developed by the synergistic effect of a tough hydrogel matrix and topological entanglements. Meanwhile, the incorporation of zinc chloride (ZnCl2) in the hydrogel electrolyte prevents the freezing of water solvents and endows the all-hydrogel supercapacitor with mechanical flexibility and fatigue resistance across a wide temperature range of 20 °C to -60 °C. Such all-hydrogel supercapacitor demonstrates satisfactory low-temperature electrochemical performance, delivering a high energy density of 11 mWh cm-2 and excellent cycling stability with a capacitance retention of 90% over 10000 cycles at -40 °C. Notably, the fabricated all-hydrogel supercapacitor can endure dynamic deformations and operate well under 2000 tension cycles even at -40 °C, without experiencing delamination and electrochemical failure. This work offers a promising strategy for flexible energy storage devices with low-temperature adaptability.

Sticky and Strain-Gradient Artificial Epineurium for Sutureless Nerve Repair in Rodents and Nonhuman Primates

The need for the development of soft materials capable of stably adhering to nerve tissues without any suturing followed by additional damages is at the fore at a time when success in postoperative recovery depends largely on the surgical experience and/or specialized microsuturing skills of the surgeon. Despite fully recognizing such prerequisite conditions, designing the materials with robust adhesion to wet nerves as well as acute/chronic anti-inflammation remains to be resolved. Herein, a sticky and strain-gradient artificial epineurium (SSGAE) that overcomes the most critically challenging aspect for realizing sutureless repair of severely injured nerves is presented. In this regard, the SSGAE with a skin-inspired hierarchical structure entailing strain-gradient layers, anisotropic Janus layers including hydrophobic top and hydrophilic bottom surfaces, and synergistic self-healing capabilities enables immediate and stable neurorrhaphy in both rodent and nonhuman primate models, indicating that the bioinspired materials strategy significantly contributes to translational medicine for effective peripheral nerve repair.

A Laparoscopically Compatible Rapid-Adhesion Bioadhesive for Asymmetric Adhesion, Non-Pressing Hemostasis, and Seamless Seal

Bioadhesive hydrogels offer unprecedented opportunities in hemostatic agents and tissue sealing; however, the application of existing bioadhesive hydrogels through narrow spaces to achieve strong adhesion in fluid-rich physiological environments is challenged either by undesired indiscriminate adhesion or weak wet tissue adhesion. Here, a laparoscopically compatible asymmetric adhesive hydrogel (aAH) composed of sprayable adhesive hydrogel powders and injectable anti-adhesive glue is proposed for hemostasis and to seal the bloody tissues in a non-pressing way, allowing for preventing postoperative adhesion. The powders can seed on the irregular bloody wound to rapidly absorb interfacial fluid, crosslink, and form an adhesive hydrogel to hemostatic seal (blood clotting time and tissue sealing in 10 s, ≈200 mm Hg of burst pressure in sealed porcine tissues). The aAH can be simply formed by crosslinking the upper powder with injectable glue to prevent postoperative adhesion (adhesive strength as low as 1 kPa). The aAH outperforms commercial hemostatic agents and sealants in the sealing of bleeding organs in live rats, demonstrating superior anti-adhesive efficiency. Further, the hemostatic seamless sealing by aAH succeeds in shortening the time of warm ischemia, decreasing the blood loss, and reducing the possibility of rebleeding in the porcine laparoscopic partial nephrectomy model.

Injectable Self-Expanding/Self-Propelling Hydrogel Adhesive with Procoagulant Activity and Rapid Gelation for Lethal Massive Hemorrhage Management

Developing hydrogels that can quickly reach deep bleeding sites, adhere to wounds, and expand to stop lethal and/or noncompressible bleeding in civil and battlefield environments remains a challenge. Herein, an injectable, antibacterial, self-expanding, and self-propelling hydrogel bioadhesive with procoagulant activity and rapid gelation is reported. This hydrogel combines spontaneous gas foaming and rapid Schiff base crosslinking for lethal massive hemorrhage. Hydrogels have rapid gelation and expansion rate, high self-expanding ratio, excellent antibacterial activity, antioxidant efficiency, and tissue adhesion capacity. In addition, hydrogels have good cytocompatibility, procoagulant ability, and higher blood cell/platelet adhesion activity than commercial combat gauze and gelatin sponge. The optimized hydrogel (OD-C/QGQL-A30) exhibits better hemostatic ability than combat gauze and gelatin sponge in rat liver and femoral artery bleeding models, rabbit volumetric liver loss massive bleeding models with/without anticoagulant, and rabbit liver and kidney incision bleeding models with bleeding site not visible. Especially, OD-C/QGQL-A30 rapidly stops the bleedings from pelvic area of rabbit, and swine subclavian artery vein transection. Furthermore, OD-C/QGQL-A30 has biodegradability and biocompatibility, and accelerates Methicillin-resistant S. aureus (MRSA)-infected skin wound healing. This injectable, antibacterial, self-expanding, and self-propelling hydrogel opens up a new avenue to develop hemostats for lethal massive bleeding, abdominal organ bleeding, and bleeding from coagulation lesions.

Progress of polysaccharide-based tissue adhesives

Recently, polymer-based tissue adhesives (TAs) have gained the attention of scientists and industries as alternatives to sutures for sealing and closing wounds or incisions because of their ease of use, low cost, minimal tissue damage, and short application time. However, poor mechanical properties and weak adhesion strength limit the application of TAs, although numerous studies have attempted to develop new TAs with enhanced performance. Therefore, next-generation TAs with improved multifunctional properties are required. In this review, we address the requirements of polymeric TAs, adhesive characteristics, adhesion strength assessment methods, adhesion mechanisms, applications, advantages and disadvantages, and commercial products of polysaccharide (PS)-based TAs, including chitosan (CS), alginate (AL), dextran (DE), and hyaluronic acid (HA). Additionally, future perspectives are discussed.

Recent Development and Applications of Polydopamine in Tissue Repair and Regeneration Biomaterials

The various tissue damages are a severe problem to human health. The limited human tissue regenerate ability requires suitable biomaterials to help damage tissue repair and regeneration. Therefore, many researchers devoted themselves to exploring biomaterials suitable for tissue repair and regeneration. Polydopamine (PDA) as a natural and multifunctional material which is inspired by mussel has been widely applied in different biomaterials. The excellent properties of PDA, such as strong adhesion, photothermal and high drug-loaded capacity, seem to be born for tissue repair and regeneration. Furthermore, PDA combined with different materials can exert unexpected effects. Thus, to inspire researchers, this review summarizes the recent and representative development of PDA biomaterials in tissue repair and regeneration. This article focuses on why apply PDA in these biomaterials and what PDA can do in different tissue injuries.

Novel microneedle platforms for the treatment of wounds by drug delivery: A review

The management and treatment of wounds are complex and pose a substantial financial burden to the patient. However, the complex environment of wounds leads to inadequate drug absorption to achieve the desired therapeutic effect. As a novel technological platform, microneedles are widely used in drug delivery because of their multiple drug loading, multistage drug release, and multiple designs of topology. This study systematically summarizes and analyzes the manufacturing methods and limitations of different microneedles, as well as the latest research advances in pain management, drug delivery, and healing promotion, and presents the challenges and opportunities for clinical applications. On this basis, the development of microneedles in external wound repair and management is envisioned, and it is hoped that this study can provide guidelines for the design of microneedle systems in different application contexts, including the selection of materials, preparation methods, and structural design, to achieve better healing and regeneration results.

Natural polymer-based bioadhesives as hemostatic platforms for wound healing

Medical adhesives are advanced but challenging alternatives to wound closure and repair, especially in mitigating uncontrolled hemorrhage. Ideal hemostatic adhesives need to meet good biocompatibility and biodegradability, adequate mechanical strength, and strong tissue adhesion functionality under wet and dynamic conditions. Considering these requirements, natural polymers such as polysaccharide, protein and DNA, attract great attention as candidates for making bioadhesives because of their distinctive physicochemical performances and biological properties. This review systematically summarizes the advances of bioadhesives based on natural polysaccharide, protein and DNA. Various physical and chemical cross-linking strategies have been introduced for adhesive synthesis and their hemostatic applications are introduced from the aspect of versatility. Furthermore, the possible challenges and future opportunities of bioadhesives are discussed, providing insights into the development of high-performance hemostatic materials.

Bioadhesive Technology Platforms

Bioadhesives have emerged as transformative and versatile tools in healthcare, offering the ability to attach tissues with ease and minimal damage. These materials present numerous opportunities for tissue repair and biomedical device integration, creating a broad landscape of applications that have captivated clinical and scientific interest alike. However, fully unlocking their potential requires multifaceted design strategies involving optimal adhesion, suitable biological interactions, and efficient signal communication. In this Review, we delve into these pivotal aspects of bioadhesive design, highlight the latest advances in their biomedical applications, and identify potential opportunities that lie ahead for bioadhesives as multifunctional technology platforms.

Cationic Biopolymeric Scaffold of Chelating Nanohydroxyapatite Self-Regulates Intraoral Microenvironment for Periodontal Bone Regeneration

Periodontal bone defect is a common but longstanding healthcare issue since traditional bone grafts have limited functionalities in regulating complex intraoral microenvironments. Here, a porous cationic biopolymeric scaffold (CSC-g-nHAp) with microenvironment self-regulating ability was synthesized by chitosan-catechol chelating the Ca2+ of nanohydroxyapatite and bonding type I collagen. Chitosan-catechol's inherent antibacterial and antioxidant abilities endowed this scaffold with desirable abilities to eliminate periodontal pathogen infection and maintain homeostatic balances between free radical generation and elimination. Meanwhile, this scaffold promoted rat bone marrow stromal cells' osteogenic differentiation and achieved significant ectopic mineralization after 4 weeks of subcutaneous implantation in nude mice. Moreover, after 8 weeks of implantation in the rat critical-sized periodontal bone defect model, CSC-g-nHAp conferred 5.5-fold greater alveolar bone regeneration than the untreated group. This cationic biopolymeric scaffold could regulate the local microenvironment through the synergistic effects of its antibacterial, antioxidant, and osteoconductive activities to promote solid periodontal bone regeneration.

Glucose-primed PEEK orthopedic implants for antibacterial therapy and safeguarding diabetic osseointegration

Diabetic infectious microenvironment (DIME) frequently leads to a critical failure of osseointegration by virtue of its main peculiarities including typical hyperglycemia and pathogenic infection around implants. To address the plaguing issue, we devise a glucose-primed orthopedic implant composed of polyetheretherketone (PEEK), Cu-chelated metal-polyphenol network (hauberk coating) and glucose oxidase (GOx) for boosting diabetic osseointegration. Upon DIME, GOx on implants sostenuto consumes glucose to generate H2O2, and Cu liberated from hauberk coating catalyzes the H2O2 to highly germicidal •OH, which massacres pathogenic bacteria through photo-augmented chemodynamic therapy. Intriguingly, the catalytic efficiency of the coating gets greatly improved with the turnover number (TON) of 0.284 s-1. Moreover, the engineered implants exhibit satisfactory cytocompatibility and facilitate osteogenicity due to the presence of Cu and osteopromotive polydopamine coating. RNA-seq analysis reveals that the implants enable to combat infections and suppress pro-inflammatory phenotype (M1). Besides, in vivo evaluations utilizing infected diabetic rat bone defect models at week 4 and 8 authenticate that the engineered implants considerably elevate osseointegration through pathogen elimination, inflammation dampening and osteogenesis promotion. Altogether, our present study puts forward a conceptually new tactic that arms orthopedic implants with glucose-primed antibacterial and osteogenic capacities for intractable diabetic osseointegration.

The hierarchical porous structures of diatom biosilica-based hemostat: From selective adsorption to rapid hemostasis

Here, we developed a Ca2+ modified diatom biosilica-based hemostat (DBp-Ca2+) with a full scale hierarchical porous structure (pore sizes range from micrometers to nanometers). The unique porous size in stepped arrangement of DBp-Ca2+give it selective adsorption capacity during coagulation process, resulted in rapid hemorrhage control. Based on in vitro and in vivo studies, it was confirmed that the primary micropores of DBp-Ca2+gave it high porosity to hold water (water absorption: 78.46 ± 1.12 %) and protein (protein absorption: 83.7 ± 1.33 mg/g). Its secondary mesopores to macropores could reduce of water diffusion length to accelerate blood exchange (complete within 300 ms). The tertiary stacking pores of DBp-Ca2+ could absorb platelets and erythrocytes to reduce more than 50 % of thrombosis time, and provided enough contact between Ca active site and coagulation factors for triggering clotting cascade reaction. This work not only developed a novel DBs based hemostat with efficient hemorrhage control, but also provided new insights to study procoagulant mechanism of inorganic hemostat with hierarchical porous structure from selective adsorption to rapid hemostasis.

Coupling of Adhesion and Anti-Freezing Properties in Hydrogel Electrolytes for Low-Temperature Aqueous-Based Hybrid Capacitors

Solid-state zinc-ion capacitors are emerging as promising candidates for large-scale energy storage owing to improved safety, mechanical and thermal stability and easy-to-direct stacking. Hydrogel electrolytes are appealing solid-state electrolytes because of eco-friendliness, high conductivity and intrinsic flexibility. However, the electrolyte/electrode interfacial contact and anti-freezing properties of current hydrogel electrolytes are still challenging for practical applications of zinc-ion capacitors. Here, we report a class of hydrogel electrolytes that couple high interfacial adhesion and anti-freezing performance. The synergy of tough hydrogel matrix and chemical anchorage enables a well-adhered interface between hydrogel electrolyte and electrode. Meanwhile, the cooperative solvation of ZnCl2 and LiCl hybrid salts renders the hydrogel electrolyte high ionic conductivity and mechanical elasticity simultaneously at low temperatures. More significantly, the Zn||carbon nanotubes hybrid capacitor based on this hydrogel electrolyte exhibits low-temperature capacitive performance, delivering high-energy density of 39 Wh kg-1 at -60 °C with capacity retention of 98.7% over 10,000 cycles. With the benefits of the well-adhered electrolyte/electrode interface and the anti-freezing hydrogel electrolyte, the Zn/Li hybrid capacitor is able to accommodate dynamic deformations and function well under 1000 tension cycles even at -60 °C. This work provides a powerful strategy for enabling stable operation of low-temperature zinc-ion capacitors.

Biologically Derived Nanoarchitectonic Coatings for the Engineering of Hemostatic Needles

Bleeding after venipuncture could cause blood loss, hematoma, bruising, hemorrhagic shock, and even death. Herein, a hemostatic needle with antibacterial property is developed via coating of biologically derived carboxymethyl chitosan (CMCS) and Cirsium setosum extract (CsE). The rapid transition from films of the coatings to hydrogels under a wet environment provides an opportunity to detach the coatings from needles and subsequently seal the punctured site. The hydrogels do not significantly influence the healing process of the puncture site. After hemostasis, the coatings on hemostatic needles degrade in 72 h without inducing a systemic immune response. The composition of CMCS can inhibit bacteria of Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus by destroying the membrane of bacteria. The hemostatic needle with good hemostasis efficacy, antibacterial property, and safety is promising for the prevention of bleeding-associated complications in practical applications.

Benzeneboronic-alginate/quaternized chitosan-catechol powder with rapid self-gelation, wet adhesion, biodegradation and antibacterial activity for non-compressible hemorrhage control

Although hemostatic powders have excellent adaptability for irregular and inaccessible wounds, their hemostasis for continuous bleeding or bleeding wounds of non-compressible organs remains a critical challenge. Herein, a series of benzeneboronic acid-modified sodium alginate/catechol-modified quaternized chitosan (SA-BA/QCS-C, SBQCC) powders is developed by borate ester crosslinking for non-compressible hemorrhage control. SBQCC powders possess remarkable tissue adhesion, rapid self-gelation, good cytocompatibility and antibacterial activity against S. aureus and E. coil. The blood coagulation assays show that SBQCC powders display excellent blood clotting ability due to the synergistic effect of SA-BA and QCS-C. The SBQCC2 powder with the SA-BA to QCS-C mass ratio of 5 to 3 has the greatest effect on the blood-clotting rate. Upon depositing SBQCC2 powder to bleeding wounds of rabbit liver, the powder can absorb a large amount of blood and form a stable hydrogel physical barrier at the bleeding wounds in situ to achieve non-pressing rapid hemostasis. The SBQCC2 powder also has good biocompatibility and can be degraded in vivo. Altogether, the SBQCC powders can be a promising candidate for rapid hemostasis, and these findings may provide a new perspective for improving the hemostatic efficiency of the hemostatic powder in biomedical fields.

Development of a Stretchable and Water-Resistant Hydrogel with Antibacterial and Antioxidant Dual Functions for Wound Healing in Movable Parts

The treatment of wounds that develop on moving parts of the body, such as joints, is considered a challenge due to poor mechanical matching and secondary injury caused by continuous motion and inflammation. Herein, a stretchable, multifunctional hydrogel dressing utilizing the dual cross-linking of chitosan (CS) and acrylic acid (AA) and modified with caffeic acid (CA) and aloin (Alo) was developed. Mechanical testing demonstrated that the hydrogel possessed excellent stretching capability (of approximately 869%) combined with outstanding adhesion (about 56 kPa), contributing to its compatibility with moving parts and allowing complete coverage of wound sites without limiting joint and organ motion. Bioinformatics analysis confirmed that use of the hydrogel resulted in upregulated expression of multiple genes related to angiogenesis and cell proliferation. Furthermore, antibacterial testing indicated that the dressing suppressed the growth of Escherichia coli and methicillin-resistant Staphylococcus aureus (MRSA), providing a better microenvironment for wound healing. An in vivo wound defect model on movable skin verified that the wound healing observed with the hydrogel dressing was superior to that observed with a commercially available dressing. Taken together, the results suggest that a stretchable multifunctional hydrogel dressing represents a promising alternative wound dressing with therapeutic potential for superior healing, especially for moving parts of the body.

Catechol-chitosan/carboxymethylated cotton-based Janus hemostatic patch for rapid hemostasis in coagulopathy

Uncontrolled bleeding is the leading cause of death, and the death risk of bleeding from coagulopathy is even higher. By infusing the relevant coagulation factors, bleeding in patients with coagulopathy can be clinically treated. However, there are not many emergency hemostatic products accessible for coagulopathy patients. In response, a Janus hemostatic patch (PCMC/CCS) with a two-layer structure of partly carboxymethylated cotton (PCMC) and catechol-grafted chitosan (CCS) was developed. Ultra-high blood absorption (4000 %) and excellent tissue adhesion (60 kPa) were both displayed by PCMC/CCS. The proteomic analysis revealed that PCMC/CCS has significantly contributed to the creative generation of FV, FIX, and FX, as well as to the substantial enrichment of FVII and FXIII, re-paving the initially blocked coagulation pathway of coagulopathy to promote hemostasis. The in vivo bleeding model of coagulopathy demonstrated that PCMC/CCS was substantially more effective than gauze and commercial gelatin sponge at achieving hemostasis in just 1 min. The study provides one of the first investigations on procoagulant mechanisms in anticoagulant blood conditions. Rapid hemostasis in coagulopathy will be significantly affected by the results of this experiment.

Mussel Foot Protein Inspired Tape-Type Adhesive with Water-Responsive, High Conformal, Tough, and On-Demand Detachable Adhesion to Wet Tissue

Wet adhesion is highly demanded in noninvasive wound closure, tissue repair, and biomedical devices, but it is still a big challenge for developing biosafe and tough wet bioadhesives due to low or even nonadhesion in the wet state for conventional adhesives. Inspired by the wet-adhesion-contributing factors of mussel foot proteins, a water-responsive dry robust tissue adhesive PAGU tape is made with thickness of <0.5 mm through fast UV-initiated copolymerization of acrylic acid (AA), gelatin (Gel), and hexadecenyl-1,2-catechol (UH). The tape shows strong cohesive mechanical properties and strong interfacial adhesion bonds. Upon application onto wet tissue, the adhesive tape can conform to the tissue, quickly dry tissue surface through absorbing surface/interfacial water and then allows formation of interfacial bonding with a high interfacial toughness of ≈818 J m-2 . Furthermore, it can be readily detached by treating with aq. urea solution. A highly efficient avenue is provided here for producing conformable, tough, and easy detachable wet bioadhesive tapes.

pH-sensitive gallol-rich chitosan hydrogel beads for on-off controlled drug delivery

Malignant tumors have emerged as a serious health issue, and the interest in developing pH-sensitive polymers for site-specific drug delivery has increased. The physical and/or chemical properties of pH-sensitive polymers depend on the pH, and thus, drugs can be released by cleaving dynamic covalent and/or noncovalent bonds. In this study, gallic acid (GA) was conjugated to chitosan (CS) to prepare self-crosslinked hydrogel beads containing Schiff base (imine bond) crosslinks. The CS-GA hydrogel beads were formed by the dropwise addition of the CS-GA conjugate solution into a Tris-HCl buffer solution (TBS, pH 8.5). The pH-sensitivity of pristine CS was significantly enhanced following the introduction of GA moiety, and as a result, the CS-GA hydrogel beads swelled more than approximately 5000 % at pH 4.0, indicating an excellent swelling/deswelling ability of the beads at different pH (pH 4.0 and 8.5). The reversible breakage/recovery of the imine crosslinks in the CS-GA hydrogel beads was confirmed through X-ray photoelectron spectroscopic and rheological studies. Finally, Rhodamine B was loaded onto the hydrogel beads as a model drug to investigate the pH-sensitive drug release behavior. At pH 4, the drug was released up to approximately 83 % within 12 h. The findings indicate that the CS-GA hydrogel beads have great potential as a drug delivery system that is sensitive to acidic tumor sites in the body.

Adhesion and Cohesion Differences between Catechol- and Pyrogallol-Functionalized Chitosan

Marine-inspired phenolic compounds that exhibit underwater adhesion are used as biomedical adhesives under wet conditions. While these applications mainly use catechol and pyrogallol moieties that contain different numbers of hydroxyl groups on their benzene rings, how this difference affects adhesion and cohesion is not well understood. Herein, the chitosan backbone is functionalized with catechol and pyrogallol at similar modification rates (to give chitosan-catechol (CS-CA) and chitosan-pyrogallol (CS-GA), respectively) and their interaction energies are compared by using a surface forces apparatus (SFA). The phenolic moieties decrease the rigidity of the chitosan chain and increase solubility; consequently, CS-CA and CS-GA are more cohesive and adhesive than chitosan at pH 7.4. Moreover, the additional hydroxyl group of GA provides a further interacting chance; hence, CS-GA is more cohesive and adhesive than CS-CA. This study provides in-depth insight into interactions involving chitosan derivatives bearing introduced phenolic moieties that will help to develop biomedical adhesives.

Highly gallol-substituted, rapidly self-crosslinkable, and robust chitosan hydrogel for 3D bioprinting

Although three-dimensional (3D) bioprinting is a promising technology for reconstructing artificial tissues and organs using bioink, there is a lack of a bioink that satisfies all requirements, including printability, gelation, mechanical properties, and cytocompatibility, Herein, a novel self-crosslinkable bioink derived from chitosan (CS) and gallic acid (GA) is presented. 3D printed scaffolds with excellent shape fidelity are realized by systematically analyzing the self-crosslinking mechanism of hydrogel formation from CS-GA conjugates and by optimizing various parameters of the printing process. The CS-GA hydrogel forms rapidly in a physiological pH without any chemical crosslinking agent. In addition, the CS-GA hydrogel exhibited various physical and chemical intermolecular interactions, fast gelation rates, and excellent mechanical properties (>337 kPa). Moreover, the CS-GA hydrogel singificantly improves the cell viability (>92 %) and proliferation of the bioink. Therefore, the self-crosslinkable CS-GA bioink has great potential to overcome the limitations of conventional bioinks.

Decellularized liver extracellular matrix and thrombin loaded biodegradable TOCN/Chitosan nanocomposite for hemostasis and wound healing in rat liver hemorrhage model

During deep noncompressible wound management, surgery, transplantation or post-surgical hemorrhage, rapid blood absorption and hemostasis are the key factors to be taken into consideration to reduce unexpected deaths from severe trauma. In this study, a novel hemostatic biodegradable nanocomposite was fabricated where decellularized liver extracellular matrix (L-ECM) was loaded with two natural polymers (oxidized cellulose and chitosan) in association with thrombin. Plant-derived oxidized cellulose nanofiber (TOCN) and Chitosan (CS) from deacylated chitin were self-assembled with each other by electrostatic interactions. ECM was prepared by the whole tissue decellularization process and incorporated into the composite as a source of collagen and other integrated growth factors to promote wound healing. Thrombin was also anchored with the polymers by freeze drying for enhanced hemostatic efficiency of the composite. This study is the first of its kind to report non-solubilized L-ECM and thrombin loaded TOCN and CS composite, CN/CS/EM-Th for faster hemostasis effect in a rat tail amputation (~71 s) and liver avulsion model (~41 s). Furthermore, excellent liver wound regeneration efficacy was observed in-vivo in comparison to the commercially available oxidized regenerated cellulose product SURGICEL gauge.

Chitosan-Based Hydrogels for Bioelectronic Sensing: Recent Advances and Applications in Biomedicine and Food Safety

Due to the lack of efficient bioelectronic interfaces, the communication between biology and electronics has become a great challenge, especially in constructing bioelectronic sensing. As natural polysaccharide biomaterials, chitosan-based hydrogels exhibit the advantages of flexibility, biocompatibility, mechanical tunability, and stimuli sensitivity, and could serve as an excellent interface for bioelectronic sensors. Based on the fabrication approaches, interaction mechanisms, and bioelectronic communication modalities, this review divided chitosan-based hydrogels into four types, including electrode-based hydrogels, conductive materials conjugated hydrogels, ionically conductive hydrogels, and redox-based hydrogels. To introduce the enhanced performance of bioelectronic sensors, as a complementary alternative, the incorporation of nanoparticles and redox species in chitosan-based hydrogels was discussed. In addition, the multifunctional properties of chitosan-based composite hydrogels enable their applications in biomedicine (e.g., smart skin patches, wood healing, disease diagnosis) and food safety (e.g., electrochemical sensing, smart sensing, artificial bioelectronic tongue, fluorescence sensors, surface-enhanced Raman scattering). We believe that this review will shed light on the future development of chitosan-based biosensing hydrogels for micro-implantable devices and human-machine interactions, as well as potential applications in medicine, food, agriculture, and other fields.

Multifunctionalized alginate/polydopamine cryogel for hemostasis, antibacteria and promotion of wound healing

Hemostasis and anti-infection are crucial for emergency treatment of severe trauma. Developing functional biomaterial with efficient hemostasis, antibacterial activity and wound healing is of great social significance and clinical value to fast stop bleeding and save lives, but it is still challenged. Here we designed a series of multifunctionalized SA/PDA cryogels by using two-step cross-linking of dopamine and sodium alginate. The resulting interpenetrating network structure had good swelling ratio, excellent mechanical and shape memory properties. Compared with cotton gauze and gelatin sponge, the cryogels exhibited excellent activation of coagulation cascade, more blood cells and platelet adhesion. Due to the action of polydopamine, the cryogel also showed good antioxidant activity and photothermal antibacterial ability assisted by near-infrared radiation, as well as better wound healing performance than gelatin sponge and Tegaderm™ film. Moreover, in the tests of mouse tail docking model, rat femoral artery hemostasis model and non-compressible rabbit liver defect model, the treatment by SA/PDA cryogels presented less blood loss and shorter hemostasis time than cotton gauze and gelatin sponge. Therefore, SA/PDA cryogels with simple preparation process, low cost, and good biocompatibility would be applied in the variety of great clinical applications in bleeding control, anti-infection and wound healing, etc.

Nanochitin and Nanochitosan: Chitin Nanostructure Engineering with Multiscale Properties for Biomedical and Environmental Applications

Nanochitin and nanochitosan (with random-copolymer-based multiscale architectures of glucosamine and N-acetylglucosamine units) have recently attracted immense attention for the development of green, sustainable, and advanced functional materials. Nanochitin and nanochitosan are multiscale materials from small oligomers, rod-shaped nanocrystals, longer nanofibers, to hierarchical assemblies of nanofibers. Various physical properties of chitin and chitosan depend on their molecular- and nanostructures; translational research has utilized them for a wide range of applications (biomedical, industrial, environmental, and so on). Instead of reviewing the entire extensive literature on chitin and chitosan, here, recent developments in multiscale-dependent material properties and their applications are highlighted; immune, medical, reinforcing, adhesive, green electrochemical materials, biological scaffolds, and sustainable food packaging are discussed considering the size, shape, and assembly of chitin nanostructures. In summary, new perspectives for the development of sustainable advanced functional materials based on nanochitin and nanochitosan by understanding and engineering their multiscale properties are described.

Design of biopolymer-based hemostatic material: Starting from molecular structures and forms

Uncontrolled bleeding remains as a leading cause of death in surgical, traumatic, and emergency situations. Management of the hemorrhage and development of hemostatic materials are paramount for patient survival. Owing to their inherent biocompatibility, biodegradability and bioactivity, biopolymers such as polysaccharides and polypeptides have been extensively researched and become a focus for the development of next-generation hemostatic materials. The construction of novel hemostatic materials requires in-depth understanding of the physiological hemostatic process, fundamental hemostatic mechanisms, and the effects of material chemistry/physics. Herein, we have recapitulated the common hemostatic strategies and development status of biopolymer-based hemostatic materials. Furthermore, the hemostatic mechanisms of various molecular structures (components and chemical modifications) are summarized from a microscopic perspective, and the design based on them are introduced. From a macroscopic perspective, the design of various forms of hemostatic materials, e.g., powder, sponge, hydrogel and gauze, is summarized and compared, which may provide an enlightenment for the optimization of hemostat design. It has also highlighted current challenges to the development of biopolymer-based hemostatic materials and proposed future directions in chemistry design, advanced form and clinical application.

•

Biopolymers possess sound biocompatibility, biodegradability and bioactivity for the design of hemostatic materials.

•

Molecular structure designs including component and chemical modification are summarized from a microscopic perspective.

•

Design of various forms of hemostatic materials is discussed and compared synthetically from a macroscopic perspective.

Addressing the Shortcomings of Polyphenol-Derived Adhesives: Achievement of Long Shelf Life for Effective Hemostasis

For rapid and effective hemostasis of uncontrollable bleeding, versatile hemostatic agents have been emerging. Among them, polyphenol-derived adhesives have attracted those hemostatic materials due to instantaneous formation of sticky barriers by robust interactions between the material and the serum proteins from wound. However, a critical challenge in such phenolic materials lies in long-term storage due to spontaneous oxidation under humid environments, leading to changes in hemostatic capability and adhesive strength. Here, we report a transparent hemostatic film consisting of gallol-conjugated chitosan (CHI-G) for minimizing the phenolic oxidation even for 3 months and maintaining strong tissue adhesiveness and its hemostatic ability. The film undergoes a phase transition from solid to injectable hydrogels at physiological pH for efficiently stopping internal and external hemorrhage. Interestingly, the hemostatic capability of the CHI-G hydrogels after 3 month storage depends on (i) the folded microstructure of the polymer with optimal gallol modification and (ii) an initial phase of either a solution state or a solid film. When the hydrogels are originated from the dehydrated film, their successful hemostasis is observed in a liver bleeding model. Our finding would provide an insight for design rationale of hemostatic formulations with long shelf-life.

Poly(aspartic acid) based self-healing hydrogel with blood coagulation characteristic for rapid hemostasis and wound healing applications

External hemorrhage, caused by insufficient hemostasis or surgical failure, could leads to shock or even tissue necrosis as the results of excessive blood loss. Furthermore, delayed coagulation, chronic inflammation, bacterial infection and slow cell proliferation are also major challenges to effective wound repairing. In this study, a novel hemostatic hydrogel was prepared by cross-linking inorganic polyphosphate (PolyP) conjugated poly(aspartic acid) hydrazide (PAHP) and PEO₉₀ dialdehyde (PEO₉₀ DA). Based on the dynamic characteristics of the acylhydrazone bond, the hydrogel could repair its cracks when broken under external forces. At the same time, the hydrogel showed outstanding biocompatibility and tissue adhesion with remarkable hemostatic performance. The New Zealand rabbit ear artery used as a in vivo hemostasis model and the results showed the PAHP hydrogel could stop bleeding of traumatic wound and reduce blood loss significantly. Meanwhile, the PAHP hydrogel presented intrinsic antibacterial activity, thus could inhibit the bacterial infection. In addition, the hydrogel loaded with mouse epidermal growth factor (mEGF) accelerated the wound repair rate and promoted the regeneration of fresh tissue in the mouse full thickness skin defect model. Altogether, the PAHP hydrogels exhibits great potential in the biomedical application, especially in wound dressing materials and tissue repairing.

Microfluidics-assisted optimization of highly adhesive haemostatic hydrogel coating for arterial puncture

Although common in clinical practice, bleeding after tissue puncture may cause serious outcomes, especially in arterial puncture. Herein, gelatin-tannic acid composite hydrogels with varying compositions are prepared, and their adhesive properties are further optimized in microfluidic channel-based simulated vessels for haemostasis in arterial puncture. It is revealed that the composite hydrogels on the syringe needles used for arterial puncture should possess underwater adhesion higher than 4.9 kPa and mechanical strength higher than 86.0 kPa. The needles coated with the gelatin-tannic acid composite hydrogel completely prevent blood loss after both vein and arterial puncture in different animal models. This study holds great significance for the preparation of haemostatic needles for vessel puncture, and gelatin-tannic acid hydrogel coated needles may help to prevent complications associated with arterial puncture.

•

Haemostatic needles were prepared with coating of gelatin-tannic acid hydrogel.

•

Microfluidic system was employed to optimize the underwater adhesion of gelatin-tannic acid hydrogel coating.

•

Needles coated with the gelatin-tannic acid hydrogel exhibited complete haemostasis after arterial puncture.

An instantly fixable and self-adaptive scaffold for skull regeneration by autologous stem cell recruitment and angiogenesis

Limited stem cells, poor stretchability and mismatched interface fusion have plagued the reconstruction of cranial defects by cell-free scaffolds. Here, we designed an instantly fixable and self-adaptive scaffold by dopamine-modified hyaluronic acid chelating Ca²⁺ of the microhydroxyapatite surface and bonding type I collagen to highly simulate the natural bony matrix. It presents a good mechanical match and interface integration by appropriate calcium chelation, and responds to external stress by flexible deformation. Meanwhile, the appropriate matrix microenvironment regulates macrophage M2 polarization and recruits endogenous stem cells. This scaffold promotes the proliferation and osteogenic differentiation of BMSCs in vitro, as well as significant ectopic mineralization and angiogenesis. Transcriptome analysis confirmed the upregulation of relevant genes and signalling pathways was associated with M2 macrophage activation, endogenous stem cell recruitment, angiogenesis and osteogenesis. Together, the scaffold realized 97 and 72% bone cover areas after 12 weeks in cranial defect models of rabbit (Φ = 9 mm) and beagle dog (Φ = 15 mm), respectively.

Limited stem cells and mismatched interface fusion have plagued biomaterial-mediated cranial reconstruction. Here, the authors engineer an instantly fixable and self-adaptive scaffold to promote calcium chelation and interface integration, regulate macrophage M2 polarization, and recruit endogenous stem cells.

Mussel Inspired Trigger-Detachable Adhesive Hydrogel

Adhesion to many kinds of surfaces, including biological tissues, is important in many fields but has been proved to be extremely challenging. Furthermore, peeling from strong adhesion is needed in many conditions, but is sometimes painful. Herein, a mussel inspired hydrogel is developed to achieve both strong adhesion and trigger-detachment. The former is actualized by electrostatic interactions, covalent bonds, and physical interpenetration, while the latter is triggered, on-demand, through combining a thixotropic supramolecular network and polymer double network. The results of the experiments show that the hydrogel can adhere to various material surfaces and tissues. Moreover, triggered by shear force, non-covalent interactions of the supramolecular network are destroyed. This adhesion can be peeled easily. The possible mechanism involved is discussed and proved. This work will bring new insight into electronic engineering and tissue repair like skin care for premature infants and burn victims.

Effect of Bio-Inspired Polymer Types on Engineering Characteristics of Cement Composites

Cement concrete is the most commonly used building and construction material worldwide because of its many advantages. Over time, however, it develops cracks due to shrinkage and tension, which may lead to premature failure of the entire structure. Recently, the incorporation of polymers has been explored to improve the overall strength and durability of cement concrete. In this study, two types of chitosan-based bio-inspired polymers (a-BIP and b-BIP) were synthesized and mixed with cement mortar in different proportions (5–20%). The fluidity of the resulting mixtures and the properties of the hardened samples, such as the compressive and tensile strengths, drying shrinkage, and carbonation resistance, were evaluated. The characteristics of the polymers were tuned by varying the pH during their syntheses, and their structures were characterized using nuclear magnetic resonance spectroscopy, Fourier-transform infrared spectroscopy, and ultraviolet-visible spectroscopy. After 28 days of aging, all samples containing BIPs (35.9–41.4 MPa) had noticeably higher compressive strength than the control sample (33.2 MPa). The tensile strength showed a similar improvement (up to 19.1%). Overall, the mechanical properties and durability of the samples were separately dependent on the type and amount of BIP.

In situ Thermal-Responsive Magnetic Hydrogel for Multidisciplinary Therapy of Hepatocellular Carcinoma

Current surgical single modality treatments for hepatocellular carcinoma (HCC) were restricted by recurrence, blood loss, significant trauma, and poor prognostic. Although multidisciplinary strategies for HCC treatment have been highly recommended by the clinical guidelines, there was limited choice of materials and treatments. Herein, we reported an in situ formed magnetic hydrogel with promising bioapplicable thermal-responsiveness, strong adhesion in wet conditions, high magnetic hyperthermia, and biocompatibility, leading to efficient HCC multidisciplinary treatment including postoperative treatment and transarterial embolization therapy. In vivo results indicated that this hydrogel could reduce the postoperative recurrence rate. The hemostatic ability of the thermal-responsive hydrogel was further demonstrated in both the liver scratch model and liver tumor resection. Computed tomography imaging suggested that the hydrogel could completely embolize the arterial vessels of rabbit liver tumor by vascular intervention operation, which could serve as multidisciplinary responsive materials to external magnetic field and body temperature for HCC treatment.

Multivalent non-covalent interactions lead to strongest polymer adhesion

Multivalent interactions play a leading role in biological processes such as the inhibition of inflammation or virus internalization. The multivalent interactions show enhanced strength and better selectivity compared to monovalent interactions, but they are much less understood due to their complexity. Here, we detect molecular interactions in the range of a few piconewtons to several nanonewtons and correlate them with the formation and subsequent breaking of one or several bonds and assign these bonds. This becomes possible by performing atomic force microcopy (AFM)-based single molecule force spectroscopy of a multifunctional polymer covalently attached to an AFM cantilever tip on a substrate bound polymer layer of the multifunctional polymer. Varying the pH value and the crosslinking state of the polymer layer, we find that bonds of intermediate strength (non-covalent), like coordination bonds, give the highest multivalent bond strength, even outperforming strong (covalent) bonds. At the same time, covalent bonds enhance the polymer layer density, increasing in particular the number of non-covalent bonds. In summary, we can show that the key for the design of stable and durable polymer coatings is to provide a variety of multivalent interactions and to keep the number of non-covalent interactions at a high level.

Layer-by-Layer Assembled Smart Antibacterial Coatings via Mussel-Inspired Polymerization and Dynamic Covalent Chemistry

Bacterial colonization on the surface of medical implanted devices and bacterial infection-induced biofilm have been a lethal risk for patients of clinical treatment. While antibacterial coatings fabricated by layer-by-layer (LBL) assembly techniques have been well explored, the facile preparation of substrate-independent smart antibacterial coatings with on-demand antibiotics release profile and excellent antibacterial performance is still urgently needed. In this work, this goal is addressed by LBL assembly fabrication of robust antibacterial coatings using naturally occurring and commercially available building blocks (i.e., aminoglycosides, 5,6-dihydroxyindole, and formylphenylboronic acid) via the subsequentially performed mussel-inspired polymerization and dynamic covalent chemistries. The resulting antibacterial coatings on different substates all presente a dynamic feature (i.e., pH-responsive), on-demand antibiotics release properties, and highly effective antibacterial performance both in vitro and in vivo. It is envisioned that this work can expand the scope of LBL assembly technique toward the next generation of robust and universal antibacterial coating materials by using natural building blocks and readily available chemistries.

Mussel-inspired injectable chitosan hydrogel modified with catechol for cell adhesion and cartilage defect repair

Repairing articular cartilage defects is a great challenge due to the poor self-regenerative capability of cartilage. Hydrogel-based tissue engineering has been considered an effective strategy. In this study, inspired by mussel chemistry, catechol-modified chitosan (CS-C) hydrogel was prepared under the catalysis of horseradish peroxidase/hydrogen peroxide (HRP/H₂O₂) for cartilage defect repair in a rat model. The rheological and swelling properties and biodegradation behavior of the CS-C hydrogel were investigated. Besides, the chondrogenic effect of bone mesenchymal stem cells (BMSCs) within the CS-C hydrogel was also assessed in vitro. Moreover, after injecting in rat cartilage defects, the capability of cartilage repair of the BMSC-laden CS-C hydrogel was evaluated in vivo. The results showed that the rheological property, swelling property and biodegradation behavior of the CS-C hydrogel changed with the concentration of CS-C macromolecules. Besides, the CS-C hydrogel had good biocompatibility with BMSCs and could promote the proliferation and chondrogenic differentiation of BMSCs in vitro. As for cartilage defect repair in vivo, through the evaluation of gross observation and histology, the BMSC-laden CS-C hydrogel showed better reconstruction of hyaline cartilage than the untreated group and CS-C hydrogel only. Therefore, CS-C hydrogel laden with BMSC might be a promising strategy for repairing cartilage defects.

Application of Alginate-Based Hydrogels in Hemostasis

Hemorrhage, as a common trauma injury and clinical postoperative complication, may cause serious damage to the body, especially for patients with huge blood loss and coagulation dysfunction. Timely and effective hemostasis and avoidance of bleeding are of great significance for reducing body damage and improving the survival rate and quality of life of patients. Alginate is considered to be an excellent hemostatic polymer-based biomaterial due to its excellent biocompatibility, biodegradability, non-toxicity, non-immunogenicity, easy gelation and easy availability. In recent years, alginate hydrogels have been more and more widely used in the medical field, and a series of hemostatic related products have been developed such as medical dressings, hemostatic needles, transcatheter interventional embolization preparations, microneedles, injectable hydrogels, and hemostatic powders. The development and application prospects are extremely broad. This manuscript reviews the structure, properties and history of alginate, as well as the research progress of alginate hydrogels in clinical applications related to hemostasis. This review also discusses the current limitations and possible future development prospects of alginate hydrogels in hemostatic applications.