Materials for next-generation molecularly selective synthetic membranes

Bioinspired Homonuclear Diatomic Iron Active Site Regulation for Efficient Antifouling Osmotic Energy Conversion

Membrane-based reverse electrodialysis is globally recognized as a promising technology for harnessing osmotic energy. However, its practical application is greatly restricted by the poor anti-fouling ability of existing membrane materials. Inspired by the structural and functional models of natural cytochrome c oxidases (CcO), the first use of atomically precise homonuclear diatomic iron composites as high-performance osmotic energy conversion membranes with excellent anti-fouling ability is demonstrated. Through rational tuning of the atomic configuration of the diatomic iron sites, the oxidase-like activity can be precisely tailored, leading to the augmentation of ion throughput and anti-fouling capacity. Composite membranes featuring direct Fe-Fe motif configurations embedded within cellulose nanofibers (CNF/Fe-DACs-P) surpass state-of-the-art CNF-based membranes with power densities of ca. 6.7 W m-2 and a 44.5-fold enhancement in antimicrobial performance. Combined, experimental characterization and density functional theory simulations reveal that homonuclear diatomic iron sites with metal-metal interactions can achieve ideally balanced adsorption and desorption of intermediates, thus realizing superior oxidase-like activity, enhanced ionic flux, and excellent antibacterial activity.

Ultrahydrophilic Inorganic Nanosheet-Based Nanofiltration Membranes for High Efficiency Separations of Inorganic Salts and Organic Dyes

Two-dimensional (2D) inorganic nanomaterials have garnered extensive attention in the fabrication of inorganic nanofiltration membranes due to their unique structures and properties. In this study, we developed a facile process for fabricating large-scale ultrahydrophilic nanofiltration membranes using layered titanate H1.07Ti1.73O4·nH2O nanosheets (HT-ns). A drying deposition process was used to fabricate HT-ns membranes on a poly(tetrafluoroethylene) (TF) substrate. To enhance the bonding strength between the substrate and the deposited HT-ns membrane, the substrate surface was modified with a Cu2+-adsorbed silane monomolecular layer, connecting a negatively charged HT-ns membrane and a positively charged substrate surface. The fabricated HT-ns membrane exhibited an excellent rejection performance for inorganic salts and dye molecules. The ultrahydrophilicity of HT-ns membrane with a low water contact angle of 31° results in an ultrafast water permeance, which is approximately 6 times higher than that of a simple graphene-based nanofiltration membrane. The results open a new avenue to a new category of ultrahydrophilic nanofiltration membranes.

Supramolecular Complexation Reinforced Polymer Frustrated Packing: Controllable Dual Porosity for Improved Permselectivity of Coordination Nanocage Mixed Matrix Membranes

The developments of mixed matrix membranes (MMMs) are severely hindered by the complex inter-phase interaction and the resulting poor utilization of inorganics' microporosity. Herein, a dual porosity framework is constructed in MMMs to enhance the accessibility of inorganics' microporosity to external gas molecules for the effective application of microporosity for gas separation. Nanocomposite organogels are first prepared from the supramolecular complexation of rigid polymers and 2 nm microporous coordination nanocages (CNCs). The network structures can be maintained with microporous features after solvent removal originated from the rigid nature of polymers, and the strong coordination and hydrogen bond between the two components. Moreover, the strong supramolecular attraction reinforces the frustrated packing of the rigid polymers on CNC surface, leading to polymer networks' extrinsic pores and the interconnection of CNCs' micro-cavities for the fast gas transportation. The gas permeabilities of the MMMs are 869 times for H2 and 1099 times for CO2 higher than those of pure polymers. The open metal sites from nanocage also contribute to the enhanced gas selectivity and the overall performance surpasses 2008 H2/CO2 Robeson upper bound. The supramolecular complexation reinforced packing frustration strategy offers a simple and practical solution to achieve improved gas permselectivity in MMMs.

High-Performance Carbon Molecular Sieve Membranes Derived from a PPA-Cross-linked Polyimide Precursor for Gas Separation

Carbon molecular sieve (CMS) membranes have emerged as attractive gas membranes due to their tunable pore structure and consequently high gas separation performances. In particular, polyimides (PIs) have been considered as promising CMS precursors because of their tunable structure, superior gas separation performance, and excellent thermal and mechanical strength. In the present work, polyphosphoric acid (PPA) was employed as both cross-linker and porogen, it created pores within the PI polymeric matrix, while it also effectively acting as a cross-linker to regulate the ultramicropores of the CMS membranes, thus simultaneously improving both permeability and selectivity of the CMS membranes. By employing PI/PPA hybrid with PPA content of 5 wt % as a precursor, the obtained CMS membrane exhibited a CO2 and He permeability of 1378.3 Barrer and 1431.4 Barrer, respectively, which was an approximately 10-fold increase compared to the precursor membrane. Under optimized conditions, the CO2/CH4 and He/CH4 selectivity of the obtained CMS membrane reached 81.5 and 89.9, respectively, which was 278% and 307% higher than that of the pristine PI membrane. In addition, the membrane exhibited good long-term stability during a one-week continuous test. This study clearly denoted PPA can be used for precisely tailoring the ultramicroporosity of CMS membranes.

Tunable Wettability of a Dual-Faced Covalent Organic Framework Membrane for Enhanced Water Filtration

Membrane technology plays a central role in advancing separation processes, particularly in water treatment. Covalent organic frameworks (COFs) have transformative potential in this field due to their adjustable structures and robustness. However, conventional COF membrane synthesis methods are often associated with challenges, such as time-consuming processes and limited control over surface properties. Our study demonstrates a rapid, microwave-assisted method to synthesize self-standing COF membranes within minutes. This approach allows control over the wettability of the surface and achieves superhydrophilic and near-hydrophobic properties. A thorough characterization of the membrane allows a detailed analysis of the membrane properties and the difference in wettability between its two faces. Microwave activation accelerates the self-assembly of the COF nanosheets, whereby the thickness of the membrane can be controlled by adjusting the time of the reaction. The superhydrophilic vapor side of the membrane results from -NH2 reactions with acetic acid, while the nearly hydrophobic dioxane side has terminal aldehyde groups. Leveraging the superhydrophilic face, water filtration at high water flux, complete oil removal, increased rejection with anionic dye size, and resistance to organic fouling were achieved. The TTA-DFP-COF membrane opens new avenues for research to address the urgent need for water purification, distinguished by its synthesis speed, simplicity, and superior separation capabilities.

Ion-Ion Selectivity of Synthetic Membranes with Confined Nanostructures

Synthetic membranes featuring confined nanostructures have emerged as a prominent category of leading materials that can selectively separate target ions from complex water matrices. Further advancements in these membranes will pressingly rely on the ability to elucidate the inherent connection between transmembrane ion permeation behaviors and the ion-selective nanostructures. In this review, we first abstract state-of-the-art nanostructures with a diversity of spatial confinements in current synthetic membranes. Next, the underlying mechanisms that govern ion permeation under the spatial nanoconfinement are analyzed. We then proceed to assess ion-selective membrane materials with a focus on their structural merits that allow ultrahigh selectivity for a wide range of monovalent and divalent ions. We also highlight recent advancements in experimental methodologies for measuring ionic permeability, hydration numbers, and energy barriers to transport. We conclude by putting forth the future research prospects and challenges in the realm of high-performance ion-selective membranes.

Membranes Based on Aminated Graphene Oxide with High Selectivity Toward Organic Substances

In this work, membranes based on graphene oxide, modified with oleylamine, have been prepared by a simple wet chemistry protocol without the use of complex equipment, elevated temperature, and additional reagents. The membrane material was characterized by a set of physicochemical methods: thermogravimetric analysis, Fourier transform infrared spectroscopy, X-ray diffractometry, and X-ray photoelectron spectroscopy. The prepared membranes are stable in both aqueous and organic media. The membranes have a high flux for organic substances and do not permeate water at room temperature and atmospheric pressure. The selectivity of the membranes toward organic substances increases with their thickness. The highest flux among the tested organic liquids is registered for methanol. The membranes have high selectivity toward ethanol/1-butanol and acetone/1-butanol pairs, which opens up the possibility of separating actual industrial mixtures. The membrane retains 90% of methylene blue from the alcohol solution. Our work expands the possibilities of using modified GO-based membranes in purification and filtration technologies.

Fluid energy theory of membrane

Membrane science is the key strategy to solve water shortage in the future, and its essence is energy and mass transfer. Due to the complexity and variety of the internal structure of membrane, the energy transfer theory of membrane is still a black box theory. Herein, a new fluid mechanics principle is introduced to establish the energy fluid theory of membrane, which is translated into the energy formula: such as the initial total pressure difference (ΔP), the flow rate of fluid exiting the membrane (v1 and v2), fluid density (ρ), and energy consumption by salt resistance (NSR): { [Formula: see text] +12ρv23}. The theoretical framework is not only helpful for the data analysis of the energy transfer process of membranes, but also helps to allow for more in-depth and specific theoretical research. For instance, the relationship between NSR and the concentration difference (C) of salt can be expressed as NSR = aCb (a-product constant, b-exponential constant, R2>0.99). Hence, the basic theory can not only be widely applied to a variety of membranes with complex internal structure, but also have a profound impact on the application and research of membrane science.

Progress and challenges in nitrous oxide decomposition and valorization

Nitrous oxide (N2O) decomposition is increasingly acknowledged as a viable strategy for mitigating greenhouse gas emissions and addressing ozone depletion, aligning significantly with the UN's sustainable development goals (SDGs) and carbon neutrality objectives. To enhance efficiency in treatment and explore potential valorization, recent developments have introduced novel N2O reduction catalysts and pathways. Despite these advancements, a comprehensive and comparative review is absent. In this review, we undertake a thorough evaluation of N2O treatment technologies from a holistic perspective. First, we summarize and update the recent progress in thermal decomposition, direct catalytic decomposition (deN2O), and selective catalytic reduction of N2O. The scope extends to the catalytic activity of emerging catalysts, including nanostructured materials and single-atom catalysts. Furthermore, we present a detailed account of the mechanisms and applications of room-temperature techniques characterized by low energy consumption and sustainable merits, including photocatalytic and electrocatalytic N2O reduction. This article also underscores the extensive and effective utilization of N2O resources in chemical synthesis scenarios, providing potential avenues for future resource reuse. This review provides an accessible theoretical foundation and a panoramic vision for practical N2O emission controls.

Microporous polyarylate membranes based on 3D phenolphthalein for molecular sieving

Thin-film composite (TFC) membranes have gradually replaced some traditional technologies in the extraction, separation, and concentration of high value-added pharmaceutical ingredients due to their controllable microstructure. Nevertheless, devising solvent-stable, scalable TFC membranes with high permeance and efficient molecule selectivity is urgently needed to improve the separation efficiency in the separation process. Here, we propose phenolphthalein, a commercial acid-base indicator, as an economical monomer for optimizing the micropore structure of selective layers with thickness down to 30 nanometers formed by in situ interfacial reactions. Molecular dynamics simulations indicate that the polyarylate membranes prepared using three-dimensional phenolphthalein monomers exhibit tunable microporosity and higher pore interconnectivity. Moreover, the TFC membranes show a high methanol permeance (9.9 ± 0.1 liters per square meter per hour per bar) and small molecular weight cutoff (≈289 daltons) for organic micropollutants in organic solvent systems. The polyarylate membranes exhibit higher mechanical strength (2.4 versus 0.8 gigapascals) compared to the traditional polyamide membrane.

Covalent Organic Framework Membranes with Patterned High-Density Through-Pores for Ultrafast Molecular Sieving

The creation of uniformly molecular-sized through-pores within polymeric membranes and the direct evidence of these pores are essential for fundamentally understanding the transport mechanism and improving separation efficiency. Herein, we report an electric-field-assisted interface synthesis approach to fabricating large-area covalent organic framework (COF) membranes that consist of preferentially oriented single-crystalline COF domains. These single-crystalline frameworks were translated into high-density, vertically aligned through-pores across the entire membrane, enabling the direct visualization of membrane pores with an ultrahigh resolution of 2 Å using the low-dose high-resolution transmission electron microscopy technique (HRTEM). The density of directly visualized through-pores was quantified to be 1.2 × 1017 m-2, approaching theoretical predictions. These COF membranes demonstrate ultrahigh solvent permeability, which is 10 times higher than that of state-of-the-art organic solvent nanofiltration membranes. When applied to high-value pharmaceutical separations, their COF membranes exhibit 2 orders of magnitude higher methanol permeance and 20-fold greater enrichment efficiency than their commercial counterparts.

Discrimination of Xylene Isomers by Precisely Tuning the Interlayer Spacing of Reduced Graphene Oxide Membrane

Separating xylene isomers is a challenging task due to their similar physical and chemical properties. In this study, we developed a molecular sieve incorporating a reduced graphene oxide (rGO) membrane for the precise differentiation of xylene isomers. We fabricated GO membranes using a vacuum filtration technique followed by thermal-induced reduction to produce rGO membranes with precisely controllable interlayer spacing. Notably, we could finely tune the interlayer spacing of the rGO membrane from 8.0 to 5.0 Å by simply varying the thermal reduction temperature. We investigated the reverse osmosis separation ability of the rGO membranes for xylene isomers and found that the rGO membrane with an interlayer spacing of 6.1 Å showed a high single component permeance of 0.17 and 0.04 L m-2 h-1 bar-1 for para- and ortho-xylene, respectively, exhibiting clear permselectivity. The separation factor reached 3.4 and 2.8 when 90:10 and 50:50 feed mixtures were used, respectively, with permeance 1 order of magnitude higher than that of current state-of-the-art reverse osmosis membranes. Additionally, the membrane showed negligible permeance and selectivity decay even after continuous operation for more than 5 days, suggesting commendable membrane resistance to solvent swelling and operating pressure.

Oriented Metal-Organic Framework Membranes for Molecular Separations

Metal-organic framework (MOF) membranes, which are recognized as state-of-the-art platforms applied in various separation processes, have attracted widespread attention. Nonetheless, to overcome the trade-off between permeability and selectivity, which is crucial for achieving efficient separation, it is important to rationally design and manipulate MOF membrane structure. Given remarkable advances in the past decade, a timely summary of recent advancement in this field has become indispensable. This review introduces major strategies for fabricating oriented MOF membranes, including in situ growth, contra-diffusion method, interface-assisted approach, and laminated nanosheet assembly. New insights into their updated progress and potential are elucidated. Of particular note, recent development and emerging applications of oriented MOF membranes, illustrating their potential to address environmental and energy challenges, are highlighted. Finally, remaining challenges facing their bath production and practical applications are discussed.

Scalable weaving of resilient membranes with on-demand superwettability for high-performance nanoemulsion separations

This study leverages the ancient craft of weaving to prepare membranes that can effectively treat oil/water mixtures, specifically challenging nanoemulsions. Drawing inspiration from the core-shell architecture of spider silk, we have engineered fibers, the fundamental building blocks for weaving membranes, that feature a mechanically robust core for tight weaving, coupled with a CO2-responsive shell that allows for on-demand wettability adjustments. Tightly weaving these fibers produces membranes with ideal pores, achieving over 99.6% separation efficiency for nanoemulsions with droplets as small as 20 nm. They offer high flux rates, on-demand self-cleaning, and can switch between sieving oil and water nanodroplets through simple CO2/N2 stimulation. Moreover, weaving can produce sufficiently large membranes (4800 cm2) to assemble a module that exhibits long-term stability and performance, surpassing state-of-the-art technologies for nanoemulsion separations, thus making industrial application a practical reality.

Ultrathin and Self-Supporting MOF/COF-Based Composite Membranes for Hydrogen Separation and Purification from Coke Oven Gas

Coke oven gas (COG) is considered to be one of the most likely raw materials for large-scale H2 production in the near or medium term, with membrane separation technologies standing out from traditional technologies due to their less energy-intensive structures as well as simple operation and occupation. Based on the "MOF-in/on-COF" pore modification strategy, the COF membrane (named the PBD membrane) and ZIF-67 were used as assembly elements to design advanced molecular sieving membranes for hydrogen separation. The composition and microstructure of membranes before and after ZIF-67 loading as well as ZIF-67-in-PBD membranes under different preparation conditions (metal ion concentration, metal-ligand ratio, and reaction time) were investigated by various characterizations to reveal the synthesis regularity and microstructure regulation. Furthermore, H2/CH4 separation performances and separation mechanisms were also analyzed and compared. Finally, a dense, continuous, ultrathin, and self-supporting ZIF-67-in-PBD membrane with a Co2+ concentration of 0.02 mol/L, a metal-ligand ratio of 1:4, and a reaction time of 6 h exhibited the largest specific surface area, micropore proportion, and the best H2/CH4 separation selectivity (α = 33.48), which was significantly higher than the Robeson upper limit and was in a leading position among reported MOF membranes. The separation mechanism was mainly size screening, and adsorption selectivity also contributed a little.

Highly Permeable Mixed Matrix Membranes for Gas Separation via Dual Defect-Engineered Zeolitic Imidazolate Framework-8

Defect engineering of metal-organic frameworks (MOFs) is a promising strategy for tailoring the interfacial characteristics between MOFs and polymers, aiming to create high-performance mixed matrix membranes (MMMs). This study introduces a new approach using dual defective alkylamine (AA)-modulated zeolitic imidazolate framework-8 (DAZIF-8), to develop high-flux MMMs. Tributylamine (TBA) and triethylamine (TEA) monodentate ligands coordinate with zinc ions in varying compositions. A mixture of Zn(CH3COO)2·2H2O:2-methylimidazole (Mim):AA in a 1:1.75:5 molar ratio facilitates high-yield coordination between Zn and multiple organic ligands, including Zn-Mim, Zn-TEA, and Zn-TBA (>80%). Remarkably, DAZIF-8 containing 3 mol% TBA and 2 mol% TEA exhibits exceptional characteristics, such as a Brunauer-Emmett-Teller surface area of 1745 m2 g-1 and enhanced framework rigidity. Furthermore, dual Zn-AA coordination sites on the framework's outer surface enhance compatibility with the polyimide (PI) matrix through electron donor-acceptor interactions, enabling the fabrication of high-loading MMMs with excellent mechanical durability. Importantly, the PI/DAZIF-8 (60/40 w/w) MMM demonstrates an unprecedented 759% enhancement in ethylene (C2H4) permeability (281 Barrer) with a moderate ethylene/ethane (C2H4/C2H6) selectivity of 2.95 compared to the PI, surpassing the polymeric upper limit for C2H4/C2H6 separation.

Metal organic framework-based polymeric hydrogel: A promising drug delivery vehicle for the treatment of breast cancer

The constraints associated with current cancer therapies have inspired scientists to develop advanced, precise, and safe drug delivery methods. These delivery systems boost treatment effectiveness, minimize harm to healthy cells, and combat cancer recurrence. To design advanced drug delivery vehicle with these character, in the present manuscript, we have designed a self-healing and injectable hybrid hydrogel through synergistically interacting metal organic framework, CuBTC with the poly(vinyl alcohol) (PVA). This hybrid hydrogel acts as a localized drug delivery system and was used to encapsulate and release the anticancer drug 5-Fluorouracil selectively at the targeted site in response to the physiological pH. The hydrogel was formed through transforming the gaussian coil like matrix of PVA-CuBTC into a three-dimensional network of hydrogel upon the addition of crosslinker; borax. The biocompatible character of the hydrogel was confirmed through cell viability test. The biocompatible hybrid hydrogel then was used to encapsulate and studied for the pH responsive release behavior of the anti-cancer drug, 5-FU. The in vitro cytotoxicity of the drug-loaded hydrogel was evaluated against MCF-7 and HeLa cells. The study confirms that the hybrid hydrogel is effective for targeted and sustained release of anticancer drugs at cancer sites.

Structural Design and Energy and Environmental Applications of Hydrogen-Bonded Organic Frameworks: A Systematic Review

Hydrogen-bonded organic frameworks (HOFs) are emerging porous materials that show high structural flexibility, mild synthetic conditions, good solution processability, easy healing and regeneration, and good recyclability. Although these properties give them many potential multifunctional applications, their frameworks are unstable due to the presence of only weak and reversible hydrogen bonds. In this work, the development history and synthesis methods of HOFs are reviewed, and categorize their structural design concepts and strategies to improve their stability. More importantly, due to the significant potential of the latest HOF-related research for addressing energy and environmental issues, this work discusses the latest advances in the methods of energy storage and conversion, energy substance generation and isolation, environmental detection and isolation, degradation and transformation, and biological applications. Furthermore, a discussion of the coupling orientation of HOF in the cross-cutting fields of energy and environment is presented for the first time. Finally, current challenges, opportunities, and strategies for the development of HOFs to advance their energy and environmental applications are discussed.

Integration of 2D Nanoporous Membranes in Microfluidic Devices

2D material-based membranes have emerged as promising candidates for next-generation separation technology due to their exceptional permeability and selectivity. Integration of these membranes into microfluidic devices has offered significant potential for improving the efficiency, throughput, and precision. However, designing compact and reliable microfluidic devices with membranes has many challenges, including complexities in membrane integration, analyte measurement, and contamination issues. Addressing these challenges is critical for unlocking the full potential of membrane-integrated devices. This paper proposes a systematic procedure for integrating membranes into a microfluidic device by creating a pore in the middle layer. Furthermore, an ion transport experiment is carried out across various stacked graphene and poly carbonate track etch membranes in an Ostemer-based device. The resulting device is capable of facilitating the concurrent measurement, a task that is cumbersome in standard macroscopic diffusion cells. The transparency and compactness of the microfluidic device allowed for the in situ and real-time optical characterization of analytes. The integration of microfluidic devices with 2D nanoporous membranes has enabled the incorporation of several analytical modalities, resulting in a highly versatile platform with numerous applications.

Advances in Two-Dimensional Ion-Selective Membranes: Bridging Nanoscale Insights to Industrial-Scale Salinity Gradient Energy Harvesting

Salinity gradient energy, often referred to as the Gibbs free energy difference between saltwater and freshwater, is recognized as "blue energy" due to its inherent cleanliness, renewability, and continuous availability. Reverse electrodialysis (RED), relying on ion-selective membranes, stands as one of the most prevalent and promising methods for harnessing salinity gradient energy to generate electricity. Nevertheless, conventional RED membranes face challenges such as insufficient ion selectivity and transport rates and the difficulty of achieving the minimum commercial energy density threshold of 5 W/m2. In contrast, two-dimensional nanostructured materials, featuring nanoscale channels and abundant functional groups, offer a breakthrough by facilitating rapid ion transport and heightened selectivity. This comprehensive review delves into the mechanisms of osmotic power generation within a single nanopore and nanochannel, exploring optimal nanopore dimensions and nanochannel lengths. We subsequently examine the current landscape of power generation using two-dimensional nanostructured materials in laboratory-scale settings across various test areas. Furthermore, we address the notable decline in power density observed as test areas expand and propose essential criteria for the industrialization of two-dimensional ion-selective membranes. The review concludes with a forward-looking perspective, outlining future research directions, including scalable membrane fabrication, enhanced environmental adaptability, and integration into multiple industries. This review aims to bridge the gap between previous laboratory-scale investigations of two-dimensional ion-selective membranes in salinity gradient energy conversion and their potential large-scale industrial applications.

Morphological Study before and after Thermal Treatment of Polymer-Polymer Mixed-Matrix Membranes for Gas Separations

A good integration of the polymer materials that form a mixed-matrix membrane (MMM) for gas separation is essential to reaching interesting permselective properties. In this work, a porous polymer network (PPN), obtained by combining triptycene and trifluoroacetophenone, has been used as a filler, which was blended with two o-hydroxypolyamides (HPAs) that act as polymer matrices. These polymer matrices have been thermally treated to induce a thermal rearrangement (TR) of the HPAs to polybenzoxazoles (β-TR-PBOs) through a solid-state reaction. For its structural study, various techniques have been proposed that allow us to undertake a morphological investigation into the integration of these materials. To access the internal structure of the MMMs, three different methods were used: a polishing process for the material surface, the partial dissolution of the polymer matrix, or argon plasma etching. The argon plasma technique has not only revealed its potential to visualize the internal structure of these materials; it has also been proven to allow for the transformation of their permselective properties. Force modulation and phase contrast in lift-mode techniques, along with the topographic images obtained via the tapping mode using a scanning probe microscope (SPM), have allowed us to study the distribution of the filler particles and the interaction of the polymer and the filler. The morphological information obtained via SPM, along with that of other more commonly used techniques (SEM, TGA, DSC, FTIR, WASX, gas adsorption, and permeability measurements), has allowed us to postulate the most probable structural configuration in this type of system.

Recent advances in the interfacial engineering of MOF-based mixed matrix membranes for gas separation

The membrane process stands as a promising and transformative technology for efficient gas separation due to its high energy efficiency, operational simplicity, low environmental impact, and easy up-and-down scaling. Metal-organic framework (MOF)-polymer mixed matrix membranes (MMMs) combine MOFs' superior gas-separation performance with polymers' processing versatility, offering the opportunity to address the limitations of pure polymer or inorganic membranes for large-scale integration. However, the incompatibility between the rigid MOFs and flexible polymer chains poses a challenge in MOF MMM fabrication, which can cause issues such as MOF agglomeration, sedimentation, and interfacial defects, substantially weakening membrane separation efficiency and mechanical properties, particularly gas separation. This review focuses on engineering MMMs' interfaces, detailing recent strategies for reducing interfacial defects, improving MOF dispersion, and enhancing MOF loading. Advanced characterisation techniques for understanding membrane properties, specifically the MOF-polymer interface, are outlined. Lastly, it explores the remaining challenges in MMM research and outlines potential future research directions.

Mechanically stable polymer molecular sieve membranes with switchable functionality designed for high CO2 separation performance

The development of high-performance membranes selective for carbon dioxide is critically important for advancing energy-efficient carbon dioxide capture technologies. Although molecular sieves have long been attractive membrane materials, turning them into practical membrane applications has been challenging. Here, we introduce an innovative approach for crafting a polymeric molecular sieve membrane to achieve outstanding carbon dioxide separation performance while upholding the mechanical stability. First, a polymer molecular sieve membrane having high gas permeability and mechanical stability was fabricated from a judiciously designed polymer that is solution-processable, hyper-cross-linkable, and functionalizable. Then, the carbon dioxide selectivity was fine-tuned by the subsequent introduction of various amine-based carriers. Among the diverse amines, polyethyleneimine stands out by functionalizing the larger pore region while preserving ultramicropores, leading to improved carbon dioxide/dinitrogen separation performance. The optimized membrane demonstrates exceptional carbon dioxide/dinitrogen separation performance, outperforming other reported polymer molecular sieve membranes and even competing favorably with most carbon molecular sieve membranes reported to date.

Designing Metal-Organic Framework (MOF) Membranes for Isomer Separation

Membrane-based separation has the merit of low carbon footprint. In this study, the pore size of metal-organic framework (MOF) membranes is rationally designed for discriminating various pairs of hydrocarbon isomers. Specifically, Zr-MOF UiO-66 (UiO stands for University of Oslo) membranes are developed for separating p/o-xylene due to their proper pore size. For n-hexane/2-methylpentane separation, the functional groups and proportion of the ligands in UiO-66 are gradually adjusted to effectively regulate the pore size, and UiO-66-33Br membranes are constructed. In addition, relying on the utilization of ligands with shorter length, MOF-801 membranes with smaller pore size are fabricated for n/i-butane separation.

Ultramicroporous Tröger's Base Framework Membranes for pH-Neutral Aqueous Organic Redox Flow Batteries

Processable polymers of intrinsic microporosity (PIMs) are emerging as promising candidates for next-generation ion exchange membranes (IEMs). However, especially with high ion exchange capacity (IEC), IEMs derived from PIMs suffer from severe swelling, thus, resulting in decreased selectivity. To solve this problem, we report ultramicroporous polymer framework membranes constructed with rigid Tröger's Base network chains, which are fabricated via an organic sol-gel process. These membranes demonstrate excellent antiswelling, with swelling ratios below 4.5% at a high IEC of 2.09 mmol g-1, outperforming currently reported PIM membranes. The rigid ultramicropore confinement and charged modification of pore channels endow membranes with both very high size-exclusion selectivity and competitive ion conductivity. The membranes thus enable the efficient and stable operation of pH-neutral aqueous organic redox flow batteries (AORFBs). This work presents the advantages of polymer framework materials as IEMs and calls for increasing attention to extending their varieties and utilization in other applications.

Ion transport in nanofluidics under external fields

Nanofluidic channels with tailored ion transport dynamics are usually used as channels for ion transport, to enable high-performance ion regulation behaviors. The rational construction of nanofluidics and the introduction of external fields are of vital significance to the advancement and development of these ion transport properties. Focusing on the recent advances of nanofluidics, in this review, various dimensional nanomaterials and their derived homogeneous/heterogeneous nanofluidics are first briefly introduced. Then we discuss the basic principles and properties of ion transport in nanofluidics. As the major part of this review, we focus on recent progress in ion transport in nanofluidics regulated by external physical fields (electric field, light, heat, pressure, etc.) and chemical fields (pH, concentration gradient, chemical reaction, etc.), and reveal the advantages and ion regulation mechanisms of each type. Moreover, the representative applications of these nanofluidic channels in sensing, ionic devices, energy conversion, and other areas are summarized. Finally, the major challenges that need to be addressed in this research field and the future perspective of nanofluidics development and practical applications are briefly illustrated.

Design and application of metal organic frameworks for heavy metals adsorption in water: a review

The growing apprehension surrounding heavy metal pollution in both environmental and industrial contexts has spurred extensive research into adsorption materials aimed at efficient remediation. Among these materials, Metal-Organic Frameworks (MOFs) have risen as versatile and promising contenders due to their adjustable properties, expansive surface areas, and sustainable characteristics, compared to traditional options like activated carbon and zeolites. This exhaustive review delves into the synthesis techniques, structural diversity, and adsorption capabilities of MOFs for the effective removal of heavy metals. The article explores the evolution of MOF design and fabrication methods, highlighting pivotal parameters influencing their adsorption performance, such as pore size, surface area, and the presence of functional groups. In this perspective review, a thorough analysis of various MOFs is presented, emphasizing the crucial role of ligands and metal nodes in adapting MOF properties for heavy metal removal. Moreover, the review delves into recent advancements in MOF-based composites and hybrid materials, shedding light on their heightened adsorption capacities, recyclability, and potential for regeneration. Challenges for optimization, regeneration efficiency and minimizing costs for large-scale applications are discussed.

Penetrant-induced plasticization in microporous polymer membranes

Penetrant-induced plasticization has prevented the industrial deployment of many polymers for membrane-based gas separations. With the advent of microporous polymers, new structural design features and unprecedented property sets are now accessible under controlled laboratory conditions, but property sets can often deteriorate due to plasticization. Therefore, a critical understanding of the origins of plasticization in microporous polymers and the development of strategies to mitigate this effect are needed to advance this area of research. Herein, an integrative discussion is provided on seminal plasticization theory and gas transport models, and these theories and models are compared to an exhaustive database of plasticization characteristics of microporous polymers. Correlations between specific polymer properties and plasticization behavior are presented, including analyses of plasticization pressures from pure-gas permeation tests and mixed-gas permeation tests for pure polymers and composite films. Finally, an evaluation of common and current state-of-the-art strategies to mitigate plasticization is provided along with suggestions for future directions of fundamental and applied research on the topic.

Advancing Ion Selective Membranes with Micropore Ion Channels in the Interaction Confinement Regime

Ion exchange membranes allowing the passage of charge-carrying ions have established their critical role in water, environmental, and energy-relevant applications. The design strategies for high-performance ion exchange membranes have evolved beyond creating microphase-separated membrane morphologies, which include advanced ion exchange membranes to ion-selective membranes. The properties and functions of ion-selective membranes have been repeatedly updated by the emergence of materials with subnanometer-sized pores and the understanding of ion movement under confined micropore ion channels. These research progresses have motivated researchers to consider even greater aims in the field, i.e., replicating the functions of ion channels in living cells with exotic materials or at least targeting fast and ion-specific transmembrane conduction. To help realize such goals, we briefly outline and comment on the fundamentals of rationally designing membrane pore channels for ultrafast and specific ion conduction, pore architecture/chemistry, and membrane materials. Challenges are discussed, and perspectives and outlooks are given.

Impact of Concentration Polarization Phenomena on Gas Separation Processes with High-Performance Zeolite Membranes: Experiments vs. Simulations

Polarization phenomena play a key role in membrane separation processes but remain largely unexplored for gas separations, where the mass transfer resistance is most often limited to the membrane. This assumption, which is commonly used today for the simulation of membrane gas separations, has to be reconsidered when high-performance materials, showing a very high permeance and/or selectivity, are used. In this study, a series of steady-state separation performances experimentally obtained on CO2/CH4 mixtures with a zeolite membrane are compared to the predictions of a dedicated 1D approach, recently derived and validated through CFD simulations. Polarization effects are shown to generate a significant negative impact on the separation performances, both in terms of the productivity and separation efficiency. The 1D model predictions, based on pure gas permeance data and without any adjustable parameters, are in very good agreement with the experimental data. This fast and efficient modeling approach can easily be implemented in simulation or process synthesis programs for the rigorous evaluation of membrane gas separation processes, when high-performance materials are used.

Sub-micro porous thin polymer membranes for discriminating H2 and CO2

Polymeric membranes with high permeance and remarkable selectivity for simultaneous H2 purification and CO2 capture under industry-relevant conditions are absent. Herein, sub-micro pores with precise molecular sieving capability are created in ultra-thin (13-30 nm) polymer membranes via controllable transformation of amine-linked polymer (ALP) films into benzimidazole-and-amine-linked polymer (BIALP) layers. The BIALP membranes exhibit stable unprecedented H2/CO2 selectivity of 120 with a H2 permeance of 315 GPU. Furthermore, high pressure (up to 11 bar) and thermal (up to 300 °C) resistance is delivered. This work provides a concept on designing porous polymeric membranes for precise molecular discrimination.

Hydrogen-bonded organic frameworks in solution enables continuous and high-crystalline membranes

Hydrogen-Bonded organic frameworks (HOFs) are a type of emerging porous materials. At present, little research has been conducted on their solution state. This work demonstrates that HOFs fragment into small particles while maintaining their original assemblies upon dispersing in solvents, as confirmed by Cryo-electron microscopy coupled with 3D electron diffraction technology. 1D and 2D-Nuclear Magnetic Resonance (NMR) and zeta potential analyses indicate the HOF-based colloid solution and the isolated molecular solution have significant differences in intermolecular interactions and aggregation behavior. Such unique solution processibility allows for fabricating diverse continuous HOF membranes with high crystallinity and porosity through solution-casting approach on various substrates. Among them, HOF-BTB@AAO membranes show high C3H6 permeance (1.979 × 10-7 mol·s-1·m-2·Pa-1) and excellent separation performance toward C3H6 and C3H8 (SF = 14). This continuous membrane presents a green, low-cost, and efficient separation technology with potential applications in petroleum cracking and purification.

Optimized Polymeric Membranes for Water Treatment: Fabrication, Morphology, and Performance

Conventional polymers, endowed with specific functionalities, are extensively utilized for filtering and extracting a diverse set of chemicals, notably metals, from solutions. The main structure of a polymer is an integral part for designing an efficient separating system. However, its chemical functionality further contributes to the selectivity, fabrication process, and resulting product morphology. One example would be a membrane that can be employed to selectively remove a targeted metal ion or chemical from a solution, leaving behind the useful components of the solution. Such membranes or products are highly sought after for purifying polluted water contaminated with toxic and heavy metals. An efficient water-purifying membrane must fulfill several requirements, including a specific morphology attained by the material with a specific chemical functionality and facile fabrication for integration into a purifying module Therefore, the selection of an appropriate polymer and its functionalization become crucial and determining steps. This review highlights the attempts made in functionalizing various polymers (including natural ones) or copolymers with chemical groups decisive for membranes to act as water purifiers. Among these recently developed membrane systems, some of the materials incorporating other macromolecules, e.g., MOFs, COFs, and graphene, have displayed their competence for water treatment. Furthermore, it also summarizes the self-assembly and resulting morphology of the membrane materials as critical for driving the purification mechanism. This comprehensive overview aims to provide readers with a concise and conclusive understanding of these materials for water purification, as well as elucidating further perspectives and challenges.

Soap-Film Membranes for CO2/Air Separation

Thin liquid films are a potential game changer in the quest for efficient gas separation strategies. Such fluid membranes, which are complementary to their solid counterparts involving porous materials, can achieve complex separation by combining permeability and adsorption mechanisms in their liquid core and at their surface. In addition, unlike porous solid membranes that must be regenerated between separation steps to recover a gas-free porosity, thus preventing continuous operation, liquid membranes can be regenerated using continuous liquid flow through the fluid film. Here, building on the self-sustained mobile film technique, we propose a simple experimental setup allowing direct quantitative assessment of the gas permeability of soap films stabilized by different surfactant types. Using a simple prototypical example involving O2/N2 mixtures, the measurement principle is first presented to establish a proof of concept. As the gas solubilities and diffusivities are known, the results of such experiments can be compared with microscopic models to disentangle the liquid core and surface permeabilities from a direct macroscopic transport response of the film subjected to a gas concentration difference. The same dynamical experiments performed for air enriched in CO2 indicate that the permeability of the soap film varies with the molar fraction in the gas compartment, a feature not observed for O2/N2. These experimental findings pave the way for the design of novel separation technologies in fields and situations where porous solid membranes are of limited efficiency.

Fabrication of Metal-Organic Framework-Based Mixed-Matrix Membranes by "Soft Spray" Technique

Metal-organic framework (MOF)-based mixed-matrix membranes (MMMs) represent a class of composite membranes that seamlessly integrate the properties of MOF fillers and polymer matrix into a hybrid system and have been widely used in countless advanced technologies. However, there remains a need for scalable and simple manufacturing techniques that can fabricate a MOF-based MMM with uniform dispersion. Herein, a series of MMMs with well-dispersed MOFs are constructed by a soft spray technique. In brief, by uniformly spraying metal ions onto the surface of a mixed solution containing polyvinylpyrrolidone (PVP) and organic ligands, a free-standing MMM is synthesized at the miscible liquid-liquid interface, facilitated by the dual function of metal ions. Moreover, soft spray technology can also introduce multifunctional materials into the MMM to customize performance. We have successfully introduced carbon black into a MOF-based MMM by soft spray, resulting in MMMs with excellent photothermal effects. The resulted MOF-based MMM exhibits favorable catalytic performance in the condensation reaction of benzaldehyde with primary amines, and the MOF-based MMM modified with carbon black significantly boosts the endothermic CO2 conversion. The work opens a new avenue for the development of MOF-based MMMs with a promising future.

Tunable Molecular Sieving by Hierarchically Assembled Porous Organic Cage Membranes with Solvent-Responsive Switchable Pores

Molecular separations involving solvents and organic impurities represent great challenges for environmental and water-intensive industries. Novel materials with intrinsic nanoscale pores offer a great choice for improvement in terms of energy efficiency and capital costs. Particularly, in applications where gradient and ordered separation of organic contaminants remain elusive, smart materials with switchable pores can offer efficient solutions. Here, we report a hierarchically networked porous organic cage membrane with dynamic control over pores, elucidating stable solvent permeance and tunable dye rejection over different molecular weights. The engineered cage membrane can spontaneously modulate its geometry and pore size from water to methanol and DMF in a reversible manner. The cage membrane exhibits ≥585.59 g mol-1 molecular weight cutoff preferentially in water and is impeded by methanol (799.8 g mol-1) and DMF (≈1017 g mol-1), reflecting 36 and 73% change in rejection due to self-regulation and the flexible network, respectively. Grazing incidence X-ray diffraction illustrates a clear peak downshift, suggesting an intrinsic structural change when the cage membranes were immersed in methanol or DMF. We have observed reversible structural changes that can also be tuned by preparing a methanol/DMF mixture and adjusting their ratio, thereby enabling gradient molecular filtration. We anticipate that such cage membranes with dynamic selectivity could be promising particularly for industrial separations and wastewater treatment.

Membrane-Based Technologies for Post-Combustion CO2 Capture from Flue Gases: Recent Progress in Commonly Employed Membrane Materials

Carbon dioxide (CO2), which results from fossil fuel combustion and industrial processes, accounts for a substantial part of the total anthropogenic greenhouse gases (GHGs). As a result, several carbon capture, utilization and storage (CCUS) technologies have been developed during the last decade. Chemical absorption, adsorption, cryogenic separation and membrane separation are the most widely used post-combustion CO2 capture technologies. This study reviews post-combustion CO2 capture technologies and the latest progress in membrane processes for CO2 separation. More specifically, the objective of the present work is to present the state of the art of membrane-based technologies for CO2 capture from flue gases and focuses mainly on recent advancements in commonly employed membrane materials. These materials are utilized for the fabrication and application of novel composite membranes or mixed-matrix membranes (MMMs), which present improved intrinsic and surface characteristics and, thus, can achieve high selectivity and permeability. Recent progress is described regarding the utilization of metal-organic frameworks (MOFs), carbon molecular sieves (CMSs), nanocomposite membranes, ionic liquid (IL)-based membranes and facilitated transport membranes (FTMs), which comprise MMMs. The most significant challenges and future prospects of implementing membrane technologies for CO2 capture are also presented.

A review on artificial water channels incorporated polyamide membranes for water purification: Transport mechanisms and performance

While thin-film composite (TFC) polyamide (PA) membranes are advanced for removing salts and trace organic contaminants (TrOCs) from water, TFC PA membranes encounter a water permeance-selectivity trade-off due to PA layer structural characteristics. Drawing inspiration from the excellent water permeance and solute rejection of natural biological channels, the development of analogous artificial water channels (AWCs) in TFC PA membranes (abbreviated as AWCM) promises to achieve superior mass transfer efficiency, enabling breaking the upper bound of water permeance and selectivity. Herein, we first discussed the types and structural characteristics of AWCs, followed by summarizing the methods for constructing AWCM. We discussed whether the AWCs acted as the primary mass transfer channels in AWCM and emphasized the important role of the AWCs in water transport and ion/TrOCs rejection. We thoroughly summarized the molecular-level mechanisms and structure-performance relationship of water molecules, ions, and TrOCs transport in the confined nanospace of AWCs, which laid the foundation for illustrating the enhanced water permeance and salt/TrOCs selectivity of AWCM. Finally, we discussed the challenges encountered in the field of AWCM and proposed future perspectives for practical applications. This review is expected to offer guidance for understanding the transport mechanisms of AWCM and developing next-generation membrane for effective water treatment.

Surface Segregation Methods toward Molecular Separation Membranes

As a highly promising approach to solving the issues of energy and environment, membrane technology has gained increasing attention in various fields including water treatment, liquid separations, and gas separations, owing to its high energy efficiency and eco-friendliness. Surface segregation, a phenomenon widely found in nature, exhibits irreplaceable advantages in membrane fabrication since it is an in situ method for synchronous modification of membrane and pore surfaces during the membrane forming process. Meanwhile, combined with the development of synthesis chemistry and nanomaterial, the group has developed surface segregation as a versatile membrane fabrication method using diverse surface segregation agents. In this review, the recent breakthroughs in surface segregation methods and their applications in membrane fabrication are first briefly introduced. Then, the surface segregation phenomena and the classification of surface segregation agents are discussed. As the major part of this review, the authors focus on surface segregation methods including free surface segregation, forced surface segregation, synergistic surface segregation, and reaction-enhanced surface segregation. The strategies for regulating the physical and chemical microenvironments of membrane and pore surfaces through the surface segregation method are emphasized. The representative applications of surface segregation membranes are presented. Finally, the current challenges and future perspectives are highlighted.

Alshgari R, Jamal M, Uz Zaman S, Umar M, Rafiq S, Muhammad N, Fawad JB, Shafiee SA. Deep Eutectic Solvent Coated Cerium Oxide Nanoparticles Based Polysulfone Membrane to Mitigate Environmental Toxicology

In this study, ceria nanoparticles (NPs) and deep eutectic solvent (DES) were synthesized, and the ceria-NP's surfaces were modified by DES to form DES-ceria NP filler to develop mixed matrix membranes (MMMs). For the sake of interface engineering, MMMs of 2%, 4%, 6% and 8% filler loadings were fabricated using solution casting technique. The characterizations of SEM, FTIR and TGA of synthesized membranes were performed. SEM represented the surface and cross-sectional morphology of membranes, which indicated that the filler is uniformly dispersed in the polysulfone. FTIR was used to analyze the interaction between the filler and support, which showed there was no reaction between the polymer and DES-ceria NPs as all the peaks were consistent, and TGA provided the variation in the membrane materials with respect to temperature, which categorized all of the membranes as very stable and showed that the trend of stability increases with respect to DES-ceria NPs filler loading. For the evaluation of efficiency of the MMMs, the gas permeation was tested. The permeability of CO2 was improved in comparison with the pristine Polysulfone (PSF) membrane and enhanced selectivities of 35.43 (αCO2/CH4) and 39.3 (αCO2/N2) were found. Hence, the DES-ceria NP-based MMMs proved useful in mitigating CO2 from a gaseous mixture.

Solid-solvent processing of ultrathin, highly loaded mixed-matrix membrane for gas separation

Mixed-matrix membranes (MMMs) that combine processable polymer with more permeable and selective filler have potential for molecular separation, but it remains difficult to control their interfacial compatibility and achieve ultrathin selective layers during processing, particularly at high filler loading. We present a solid-solvent processing strategy to fabricate an ultrathin MMM (thickness less than 100 nanometers) with filler loading up to 80 volume %. We used polymer as a solid solvent to dissolve metal salts to form an ultrathin precursor layer, which immobilizes the metal salt and regulates its conversion to a metal-organic framework (MOF) and provides adhesion to the MOF in the matrix. The resultant membrane exhibits fast gas-sieving properties, with hydrogen permeance and/or hydrogen-carbon dioxide selectivity one to two orders of magnitude higher than that of state-of-the-art membranes.

2D materials towards energy conversion processes in nanofluidics

Hierarchically assembled 2D material membranes are extremely promising platforms for energy conversion processes in nanofluidics. In this perspective, we discuss recent advances in the production of smart 2D material membranes that come close to mimicking biological energy conversion processes and how these efforts translate into the design of water purification systems, artificial photosynthesis, and solar energy conversion devices. As we depict here, 2D material membranes synergistically modulate the intrinsic active sites (nanopores), electron transport, mass transfer, and mechanical and chemical stability aiming at cost-effective and highly efficient smart membranes.

Ionic Sieving at Sub-Angstrom Precision Enabled by Metal Organic Frameworks

The demand for cesium is expanding rapidly in light of its necessity in high-tech industries. Thus, technologies that can efficiently extract cesium from the sources are critically needed. Here, the metal-organic framework (MOF) membranes created from -Cl and -NH2 functionalized MIL-53 enabled highly selective transport of cesium ions. The angstrom-scale pore windows in these MOFs conduct Cs+ ions at high throughput, 2 orders of magnitude faster than other marginally larger ions. Ascribed to size sieving effects, MIL-53-NH2 containing 6.6 Å size channels realized an exceedingly high Cs+/Li+ selectivity up to ∼315. The rapid transport of Cs+ ions relative to other ions is greatly dependent on the precision of the angstrom-scale pores. Our work highlights the enormous potential of realizing high ion selectivity with MOFs and drives the further development of these materials in a variety of advanced separations.

Biomimetic redox-responsive smart coatings with resistance-release functions for reverse osmosis membranes

Membrane fouling induces catastrophic loss of separation performance and seriously restricts the applications of reverse osmosis (RO) membranes. Inspired by the mussel structure, polydopamine (PDA) and cystamine molecules (CA) with excellent anti-fouling properties were used to prepare accessible, biocompatible, and redox-responsive coatings for RO membranes. The PDA/CA-coated RO membranes exhibit a superior water flux of 65 L m-2 h-1 with a favourable NaCl rejection exceeding 99%. The water permeability through the PDA/CA-coated membrane is much higher than that of most membranes with similar rejection rates. Due to the formed protective hydration layers by PDA/CA coatings, anti-fouling properties against proteins, polysaccharides and surfactants were evaluated separately, and ultralow fouling properties were demonstrated. Moreover, the disulfide linkages in CA molecules can cleave in a reducing environment, yielding the degradation of PDA/CA coatings, thereby removing the foulants deposited on the coatings. The degradation endows the coated membranes with satisfying longtime anti-fouling properties, where the flux recovery reaches up to 90%. The construction of redox-responsive smart coatings not only provided a promising route to alleviate membrane fouling but can also be upscaled for use in numerous practical applications like sensors, medical devices, and drug delivery.

Monolayer Fullerene Membranes for Hydrogen Separation

Hydrogen separation membranes are a critical component in the emerging hydrogen economy, offering an energy-efficient solution for the purification and production of hydrogen gas. Inspired by the recent discovery of monolayer covalent fullerene networks, here we show from concentration-gradient-driven molecular dynamics that quasi-square-latticed monolayer fullerene membranes provide the best pore size match, a unique funnel-shaped pore, and entropic selectivity. The integration of these attributes renders these membranes promising for separating H2 from larger gases such as CO2 and O2. The ultrathin membranes exhibit excellent hydrogen permeance as well as high selectivity for H2/CO2 and H2/O2 separations, surpassing the 2008 Robeson upper bounds by a large margin. The present work points toward a promising direction of using monolayer fullerene networks as membranes for high-permeance, selective hydrogen separation for processes such as water splitting.

Ultrathin Polyamide Nanofilms with Controlled Microporosity for Enhanced Solvent Permeation

Organic solvent nanofiltration (OSN) technology shows reduced energy consumption by almost 90% with great potential in achieving low-carbon separation applications. Polyamide nanofilms with controlled intrinsic and extrinsic structures (e.g., thickness and porosity) are important for achieving such a goal but are technically challenging. Herein, ultrathin polyamide nanofilms with controlled microporosity and morphology were synthesized via a molecular layer deposition method for OSN. The key is that the polyamide synthesis is controlled in a homogenous organic phase, rather than an interface, not only involving no monomer kinetic diffusion but also broadening the applicability of amine monomers. The particular nonplanar and rigid amine monomers were superbly used to increase microporosity and the nanofilm was linearly controlled at the nanometer scale to decrease thickness. The composite membrane with the polyamide nanofilms as separation layers displayed highly superior performance to current counterparts. The ethanol and methanol permeances were up to 5.5 and 14.6 L m^-2 h^-1 bar^-1, respectively, but the molecular weight cutoff was tailored as low as 300 Da. Such separation performance remained almost unchanged during a long-term operation. This work demonstrates a promising alternative that could synergistically control the physicochemical structures of ultrathin selective layers to fabricate high-performance OSN membranes for efficient separations.

Single-Molecule Fluorescence Investigations of Solute Transport Dynamics in Nanostructured Membrane Separation Materials

Many materials used for membrane separations are composed of nanoscale structures such as pores and domains. Such nanostructures often control the solute permeability and selectivity of the separation membranes. Thus, for future development of highly efficient separation membranes, it is important to understand the structural and chemical properties of these nanostructures and also their influences on solute transport dynamics. For the last two decades, single-molecule fluorescence techniques have been used to measure the detailed dynamics of solute molecules diffusing in various nanostructured materials, giving valuable insights into molecular transport mechanisms influenced by nanoscale material heterogeneity. This Perspective discusses recent single-molecule fluorescence studies on solute diffusion in materials relevant to membrane separations, including dense polymer films and nanoporous materials. These studies have revealed the formation and properties of nanostructures and unique transport dynamics of solute molecules manipulated by their confinement and partitioning to the nanostructures, which play key roles in membrane separations. This Perspective will also point out scientific challenges toward a thorough understanding of molecular-level mechanisms in membrane separations.