Quantifying cell-generated mechanical forces within living embryonic tissues

Non-Ionic Fluorosurfactants for Droplet-Based in vivo Applications

Fluorocarbon oils are uniquely suited for many biomedical applications due to their inert, bioorthogonal properties. In order to interface fluorocarbon oils with biological systems, non-ionic fluorosurfactants are necessary. However, there is a paucity of non-ionic fluorosurfactants with low interfacial tension (IFT) to stabilize fluorocarbon phases in aqueous environments (such as oil-in-water emulsions). We developed non-ionic fluorosurfactants composed of a polyethylene glycol (PEG) segment covalently bonded to a flexible perfluoropolyether (PFPE) segment that confer low IFTs between a fluorocarbon oil (HFE-7700) and water. The synthesis of a panel of surfactants spanning a molecular weight range of 0.64-66 kDa with various hydrophilic-lipophilic balances allowed for identification of minimal IFTs, ranging from 1.4 to 17.8 mN m-1. The majority of these custom fluorosurfactants display poor solubility in water, allowing their co-introduction with fluorocarbon oils and minimal leaching. We applied the PEG5PFPE1 surfactant for mechanical force measurements in zebrafish, enabling exceptional sensitivity.

Application of tissue-scale tension to avian epithelia in vivo to study multiscale mechanics and inter-germ layer coupling

As cross-disciplinary approaches drawing from physics and mechanics have increasingly influenced our understanding of morphogenesis, the tools available to measure and perturb physical aspects of embryonic development have expanded as well. However, it remains a challenge to measure mechanical properties and apply exogenous tissue-scale forces in vivo, particularly for epithelia. Exploiting the size and accessibility of the developing chick embryo, here we describe a simple technique to quantitatively apply exogenous forces on the order of 1-100 N to the endodermal epithelium. To demonstrate the utility of this approach, we performed a series of proof-of-concept experiments that reveal fundamental and unexpected mechanical behaviors in the early chick embryo, including mechanotype heterogeneity among cells of the midgut endoderm, complex non-cell autonomous effects of actin disruption, and a high degree of mechanical coupling between the endoderm and adjacent paraxial mesoderm. To illustrate the broader utility of this method, we determined that forces on the order of 10 N are sufficient to unzip the neural tube during primary neurulation. Together, these findings provide basic insights into the mechanics of embryonic epithelia in vivo in the early avian embryo, and provide a useful tool for future investigations of how morphogenesis is influenced by mechanical factors.

Counterion Exchange Enhances the Brightness and Photostability of a Fluorous Cyanine Dye

Fluorofluorophores are a unique class of fluorophores that can be solubilized in perfluorocarbons (PFCs) and used to study biological systems. However, because of the low dielectric constant and high oxygen solubility in the fluorous phase, the brightness and photostability of the fluorofluorophores are significantly diminished. Here, we leveraged the tight ion pairing in the fluorous phase to improve the photophysical properties of a fluorous soluble pentamethine dye (FCy5) via counterion exchange. We found that larger, softer, fluorinated, aryl borate counterions promote the ideal polymethine state where charge delocalization across the polymethine chain increases the brightness (6-fold) and photostability (55-fold) of FCy5.

Quantifying mechanical forces during vertebrate morphogenesis

Morphogenesis requires embryonic cells to generate forces and perform mechanical work to shape their tissues. Incorrect functioning of these force fields can lead to congenital malformations. Understanding these dynamic processes requires the quantification and profiling of three-dimensional mechanics during evolving vertebrate morphogenesis. Here we describe elastic spring-like force sensors with micrometre-level resolution, fabricated by intravital three-dimensional bioprinting directly in the closing neural tubes of growing chicken embryos. Integration of calibrated sensor read-outs with computational mechanical modelling allows direct quantification of the forces and work performed by the embryonic tissues. As they displace towards the embryonic midline, the two halves of the closing neural tube reach a compression of over a hundred nano-newtons during neural fold apposition. Pharmacological inhibition of Rho-associated kinase to decrease the pro-closure force shows the existence of active anti-closure forces, which progressively widen the neural tube and must be overcome to achieve neural tube closure. Overall, our approach and findings highlight the intricate interplay between mechanical forces and tissue morphogenesis.

Compressive stresses in cancer: characterization and implications for tumour progression and treatment

Beyond their many well-established biological aberrations, solid tumours create an abnormal physical microenvironment that fuels cancer progression and confers treatment resistance. Mechanical forces impact tumours across a range of biological sizes and timescales, from rapid events at the molecular level involved in their sensing and transmission, to slower and larger-scale events, including clonal selection, epigenetic changes, cell invasion, metastasis and immune response. Owing to challenges with studying these dynamic stimuli in biological systems, the mechanistic understanding of the effects and pathways triggered by abnormally elevated mechanical forces remains elusive, despite clear correlations with cancer pathophysiology, aggressiveness and therapeutic resistance. In this Review, we examine the emerging and diverse roles of physical forces in solid tumours and provide a comprehensive framework for understanding solid stress mechanobiology. We first review the physiological importance of mechanical forces, especially compressive stresses, and discuss their defining characteristics, biological context and relative magnitudes. We then explain how abnormal compressive stresses emerge in tumours and describe the experimental challenges in investigating these mechanically induced processes. Finally, we discuss the clinical translation of mechanotherapeutics that alleviate solid stresses and their potential to synergize with chemotherapy, radiotherapy and immunotherapies.

Intercellular fluid dynamics in tissue morphogenesis

During embryonic development, cells shape our body, which is mostly made up of water. It is often forgotten that some of this water is found in intercellular fluid, which, for example, immerses the cells of developing embryos. Intercellular fluid contributes to the properties of tissues and influences cell behaviour, thereby participating in tissue morphogenesis. While our understanding of the role of cells in shaping tissues advances, the exploration of the contribution of intercellular fluid dynamics is just beginning. In this review, we delve into the intricate mechanisms employed by cells to control fluid movements both across and within sealed tissue compartments. These mechanisms encompass sealing by tight junctions and controlled leakage, osmotic pumping, hydraulic fracturing of cell adhesion, cell and tissue contractions, as well as beating cilia. We illustrate key concepts by drawing extensively from the early mouse embryo, which successively forms multiple lumens that play essential roles in its development. Finally, we detail experimental approaches and emerging techniques that allow for the quantitative characterization and the manipulation of intercellular fluids in vivo, as well as theoretical frameworks that are crucial for comprehending their dynamics.

Actomyosin clusters as active units shaping living matter

Stress generation by the actin cytoskeleton shapes cells and tissues. Despite impressive progress in live imaging and quantitative physical descriptions of cytoskeletal network dynamics, the connection between processes at molecular scales and spatiotemporal patterns at the cellular scale is still unclear. Here, we review studies reporting actomyosin clusters of micrometre size and with lifetimes of several minutes in a large number of organisms, ranging from fission yeast to humans. Such structures have also been found in reconstituted systems in vitro and in theoretical analyses of cytoskeletal dynamics. We propose that tracking these clusters could provide a simple readout for characterising living matter. Spatiotemporal patterns of clusters could serve as determinants of morphogenetic processes that have similar roles in diverse organisms.

Long ranged stress correlations in the hard sphere liquid

The smooth emergence of shear elasticity is a hallmark of the liquid to glass transition. In a liquid, viscous stresses arise from local structural rearrangements. In the solid, Eshelby has shown that stresses around an inclusion decay as a power law r-D, where D is the dimension of the system. We study glass-forming hard sphere fluids by simulation and observe the emergence of the unscreened power-law Eshelby pattern in the stress correlations of the isotropic liquid state. By a detailed tensorial analysis, we show that the fluctuating force field, viz., the divergence of the stress field, relaxes to zero with time in all states, while the shear stress correlations develop spatial power-law structures inside regions that grow with longitudinal and transverse sound propagation. We observe the predicted exponents r-D and r-D-2. In Brownian systems, shear stresses relax diffusively within these regions, with the diffusion coefficient determined by the shear modulus and the friction coefficient.

Soft Synthetic Cells with Mobile Membrane Ligands for Ex Vivo Expansion of Therapy-Relevant T Cell Phenotypes

The expansion of T cells ex vivo is crucial for effective immunotherapy but currently limited by a lack of expansion approaches that closely mimic in vivo T cell activation. Taking inspiration from bottom-up synthetic biology, a new synthetic cell technology is introduced based on dispersed liquid-liquid phase-separated droplet-supported lipid bilayers (dsLBs) with tunable biochemical and biophysical characteristics, as artificial antigen presenting cells (aAPCs) for ex vivo T cell expansion. These findings obtained with the dsLB technology reveal three key insights: first, introducing laterally mobile stimulatory ligands on soft aAPCs promotes expansion of IL-4/IL-10 secreting regulatory CD8+ T cells, with a PD-1 negative phenotype, less prone to immune suppression. Second, it is demonstrated that lateral ligand mobility can mask differential T cell activation observed on substrates of varying stiffness. Third, dsLBs are applied to reveal a mechanosensitive component in bispecific Her2/CD3 T cell engager-mediated T cell activation. Based on these three insights, lateral ligand mobility, alongside receptor- and mechanosignaling, is proposed to be considered as a third crucial dimension for the design of ex vivo T cell expansion technologies.

Trusting the forces of our cell lines

Cells isolated from their native tissues and cultured in vitro face different selection pressures than those cultured in vivo. These pressures induce a profound transformation that reshapes the cell, alters its genome, and transforms the way it senses and generates forces. In this perspective, we focus on the evidence that cells cultured on conventional polystyrene substrates display a fundamentally different mechanobiology than their in vivo counterparts. We explore the role of adhesion reinforcement in this transformation and to what extent it is reversible. We argue that this mechanoadaptation is often understood as a mechanical memory. We propose some strategies to mitigate the effects of on-plastic culture on mechanobiology, such as organoid-inspired protocols or mechanical priming. While isolating cells from their native tissues and culturing them on artificial substrates has revolutionized biomedical research, it has also transformed cellular forces. Only by understanding and controlling them, we can improve their truthfulness and validity.

Compressible Hollow Microlasers in Organoids for High-Throughput and Real-Time Mechanical Screening

Mechanical stress within organoids is a pivotal indicator in disease modeling and pharmacokinetics, yet current tools lack the ability to rapidly and dynamically screen these mechanics. Here, we introduce biocompatible and compressible hollow microlasers that realize all-optical assessment of cellular stress within organoids. The laser spectroscopy yields identification of cellular deformation at the nanometer scale, corresponding to tens of pascals stress sensitivity. The compressibility enables the investigation of the isotropic component, which is the fundamental mechanics of multicellular models. By integrating with a microwell array, we demonstrate the high-throughput screening of mechanical cues in tumoroids, establishing a platform for mechano-responsive drug screening. Furthermore, we showcase the monitoring and mapping of dynamic contractile stress within human embryonic stem cell-derived cardiac organoids, revealing the internal mechanical inhomogeneity within a single organoid. This method eliminates time-consuming scanning and sample damage, providing insights into organoid mechanobiology.

Photo-induced changes in tissue stiffness alter epithelial budding morphogenesis in the embryonic lung

Extracellular matrix (ECM) stiffness has been shown to influence the differentiation of progenitor cells in culture, but a lack of tools to perturb the mechanical properties within intact embryonic organs has made it difficult to determine how changes in tissue stiffness influence organ patterning and morphogenesis. Photocrosslinking of the ECM has been successfully used to stiffen soft tissues, such as the cornea and skin, which are optically accessible, but this technique has not yet been applied to developing embryos. Here, we use photocrosslinking with Rose Bengal (RB) to locally and ectopically stiffen the pulmonary mesenchyme of explanted embryonic lungs cultured ex vivo . This change in mechanical properties was sufficient to suppress FGF-10-mediated budding morphogenesis along the embryonic airway, without negatively impacting patterns of cell proliferation or apoptosis. A computational model of airway branching was used to determine that FGF-10-induced buds form via a growth-induced buckling mechanism and that increased mesenchymal stiffness is sufficient to inhibit epithelial buckling. Taken together, our data demonstrate that photocrosslinking can be used to create regional differences in mechanical properties within intact embryonic organs and that these differences influence epithelial morphogenesis and patterning. Further, this photocrosslinking assay can be readily adapted to other developing tissues and model systems.

Insights gained from computational modeling of YAP/TAZ signaling for cellular mechanotransduction

YAP/TAZ signaling pathway is regulated by a multiplicity of feedback loops, crosstalk with other pathways, and both mechanical and biochemical stimuli. Computational modeling serves as a powerful tool to unravel how these different factors can regulate YAP/TAZ, emphasizing biophysical modeling as an indispensable tool for deciphering mechanotransduction and its regulation of cell fate. We provide a critical review of the current state-of-the-art of computational models focused on YAP/TAZ signaling.

Mechanical state transitions in the regulation of tissue form and function

From embryonic development, postnatal growth and adult homeostasis to reparative and disease states, cells and tissues undergo constant changes in genome activity, cell fate, proliferation, movement, metabolism and growth. Importantly, these biological state transitions are coupled to changes in the mechanical and material properties of cells and tissues, termed mechanical state transitions. These mechanical states share features with physical states of matter, liquids and solids. Tissues can switch between mechanical states by changing behavioural dynamics or connectivity between cells. Conversely, these changes in tissue mechanical properties are known to control cell and tissue function, most importantly the ability of cells to move or tissues to deform. Thus, tissue mechanical state transitions are implicated in transmitting information across biological length and time scales, especially during processes of early development, wound healing and diseases such as cancer. This Review will focus on the biological basis of tissue-scale mechanical state transitions, how they emerge from molecular and cellular interactions, and their roles in organismal development, homeostasis, regeneration and disease.

Multicell-Fold: geometric learning in folding multicellular life

During developmental processes such as embryogenesis, how a group of cells fold into specific structures, is a central question in biology. However, it remains a major challenge to understand and predict the behavior of every cell within the living tissue over time during such intricate processes. Here we present a geometric deep-learning model that can accurately capture the highly convoluted interactions among cells. We demonstrate that multicellular data can be represented with both granular and foam-like physical pictures through a unified graph data structure, considering both cellular interactions and cell junction networks. Using this model, we achieve interpretable 4-D morphological sequence alignment, and predicting cell rearrangements before they occur at single-cell resolution. Furthermore, using neural activation map and ablation studies, we demonstrate cell geometries and cell junction networks together regulate morphogenesis at single-cell precision. This approach offers a pathway toward a unified dynamic atlas for a variety of developmental processes.

Ultimately Adaptive Fluid Interfacial Phospholipid Membranes Unveiled Unanticipated High Cellular Mechanical Work

Living cells actively interact biochemically and mechanically with the surrounding extracellular matrices (ECMs) and undergo dramatic morphological and dimensional transitions, concomitantly remodeling ECMs. However, there is no suitable method to quantitatively discuss the contribution of mechanical interactions in such mutually adaptive processes. Herein, a highly deformable "living" cellular scaffold is developed to evaluate overall mechanical energy transfer between cell and ECMs. It is based on the water-perfluorocarbon interface decorated with phospholipids bearing a cell-adhesive ligand and fluorescent tag. The bioinert nature of the phospholipid membranes prevents the formation of solid-like protein nanofilms at the fluid interface, enabling to visualize and quantify cellular mechanical work against the ultimately adaptive model ECM. A new cellular wetting regime is identified, wherein interface deformation proceeds to cell flattening, followed by its eventual restoration. The cellular mechanical work during this adaptive wetting process is one order of magnitude higher than those reported with conventional elastic platforms. The behavior of viscous liquid drops at the air-water interface can simulate cellular adaptive wetting, suggesting that overall viscoelasticity of the cell body predominates the emergent wetting regime and regulates mechanical output. Cellular-force-driven high-energy states on the adaptive platform can be useful for cell fate manipulation.

Mechanical models and measurement methods of solid stress in tumors

In addition to genetic mutations, biomechanical factors also affect the structures and functions of the tumors during tumor growth, including solid stress, interstitial fluid pressure, stiffness, and microarchitecture. Solid stress affects tumors by compressing cancer and stromal cells and deforming blood and lymphatic vessels which reduce supply of oxygen, nutrients and drug delivery, making resistant to treatment. Researchers simulate the stress by creating mechanical models both in vitro and in vivo. Cell models in vitro are divided into two dimensions (2D) and three dimensions (3D). 2D models are simple to operate but exert pressure on apical surface of the cells. 3D models, the multicellular tumor spheres, are more consistent with the actual pathological state in human body. However, the models are more difficult to establish compared with the 2D models. Besides, the procedure of the animal models in vivo is even more complex and tougher to operate. Then, researchers challenged to quantify the solid stress through some measurement methods. We compared the advantages and limitations of these models and methods, which may help to explore new therapeutic targets for normalizing the tumor's physical microenvironment. KEY POINTS: •This is the first review to conclude the mechanical models and measurement methods in tumors. •The merit and demerit of these models and methods are compared. •Insights into further models are discussed.

Chondrocyte hypertrophy in the growth plate promotes stress anisotropy affecting long bone development through chondrocyte column formation

The length of long bones is determined by column formation of proliferative chondrocytes and subsequent chondrocyte hypertrophy in the growth plate during bone development. Despite the importance of mechanical loading in long bone development, the mechanical conditions of the cells within the growth plate, such as the stress field, remain unclear owing to the difficulty in investigating spatiotemporal changes within dynamically growing tissues. In this study, the mechanisms of longitudinal bone growth were investigated from a mechanical perspective through column formation of proliferative chondrocytes within the growth plate before secondary ossification center formation using continuum-based particle models (CbPMs). A one-factor model, which simply describes essential aspects of a biological signaling cascade regulating cell activities within the growth plate, was developed and incorporated into CbPM. Subsequently, the developmental process and maintenance of the growth plate structure and resulting bone morphogenesis were simulated. Thus, stress anisotropy in the proliferative zone that affects bone elongation through chondrocyte column formation was identified and found to be promoted by chondrocyte hypertrophy. These results provide further insights into the mechanical regulation of multicellular dynamics during bone development.

Using a micro-device with a deformable ceiling to probe stiffness heterogeneities within 3D cell aggregates

Recent advances in the field of mechanobiology have led to the development of methods to characterise single-cell or monolayer mechanical properties and link them to their functional behaviour. However, there remains a strong need to establish this link for three-dimensional (3D) multicellular aggregates, which better mimic tissue function. Here we present a platform to actuate and observe many such aggregates within one deformable micro-device. The platform consists of a single polydimethylsiloxane piece cast on a 3D-printed mould and bonded to a glass slide or coverslip. It consists of a chamber containing cell spheroids, which is adjacent to air cavities that are fluidically independent. Controlling the air pressure in these air cavities leads to a vertical displacement of the chamber's ceiling. The device can be used in static or dynamic modes over time scales of seconds to hours, with displacement amplitudes from a fewµm to several tens of microns. Further, we show how the compression protocols can be used to obtain measurements of stiffness heterogeneities within individual co-culture spheroids, by comparing image correlations of spheroids at different levels of compression with finite element simulations. The labelling of the cells and their cytoskeleton is combined with image correlation methods to relate the structure of the co-culture spheroid with its mechanical properties at different locations. The device is compatible with various microscopy techniques, including confocal microscopy, which can be used to observe the displacements and rearrangements of single cells and neighbourhoods within the aggregate. The complete experimental and imaging platform can now be used to provide multi-scale measurements that link single-cell behaviour with the global mechanical response of the aggregates.

Adherens junctions as molecular regulators of emergent tissue mechanics

Tissue and organ development during embryogenesis relies on the collective and coordinated action of many cells. Recent studies have revealed that tissue material properties, including transitions between fluid and solid tissue states, are controlled in space and time to shape embryonic structures and regulate cell behaviours. Although the collective cellular flows that sculpt tissues are guided by tissue-level physical changes, these ultimately emerge from cellular-level and subcellular-level molecular mechanisms. Adherens junctions are key subcellular structures, built from clusters of classical cadherin receptors. They mediate physical interactions between cells and connect biochemical signalling to the physical characteristics of cell contacts, hence playing a fundamental role in tissue morphogenesis. In this Review, we take advantage of the results of recent, quantitative measurements of tissue mechanics to relate the molecular and cellular characteristics of adherens junctions, including adhesion strength, tension and dynamics, to the emergent physical state of embryonic tissues. We focus on systems in which cell-cell interactions are the primary contributor to morphogenesis, without significant contribution from cell-matrix interactions. We suggest that emergent tissue mechanics is an important direction for future research, bridging cell biology, developmental biology and mechanobiology to provide a holistic understanding of morphogenesis in health and disease.

Proliferation-driven mechanical compression induces signalling centre formation during mammalian organ development

Localized sources of morphogens, called signalling centres, play a fundamental role in coordinating tissue growth and cell fate specification during organogenesis. However, how these signalling centres are established in tissues during embryonic development is still unclear. Here we show that the main signalling centre orchestrating development of rodent incisors, the enamel knot (EK), is specified by a cell proliferation-driven buildup in compressive stresses (mechanical pressure) in the tissue. Direct mechanical measurements indicate that the stresses generated by cell proliferation are resisted by the surrounding tissue, creating a circular pattern of mechanical anisotropy with a region of high compressive stress at its centre that becomes the EK. Pharmacological inhibition of proliferation reduces stresses and suppresses EK formation, and application of external pressure in proliferation-inhibited conditions rescues the formation of the EK. Mechanical information is relayed intracellularly through YAP protein localization, which is cytoplasmic in the region of compressive stress that establishes the EK and nuclear in the stretched anisotropic cells that resist the pressure buildup around the EK. Together, our data identify a new role for proliferation-driven mechanical compression in the specification of a model signalling centre during mammalian organ development.

Alteration of mechanical stresses in the murine brain by age and hemorrhagic stroke

Residual mechanical stresses, also known as solid stresses, emerge during rapid differential growth or remodeling of tissues, as observed in morphogenesis and tumor growth. While residual stresses typically dissipate in most healthy adult organs, as the growth rate decreases, high residual stresses have been reported in mature, healthy brains. However, the origins and consequences of residual mechanical stresses in the brain across health, aging, and disease remain poorly understood. Here, we utilized and validated a previously developed method to map residual mechanical stresses in the brains of mice across three age groups: 5-7 days, 8-12 weeks, and 22 months. We found that residual solid stress rapidly increases from 5-7 days to 8-12 weeks and remains high in mature 22 months mice brains. Three-dimensional mapping revealed unevenly distributed residual stresses from the anterior to posterior coronal brain sections. Since the brain is rich in negatively charged hyaluronic acid, we evaluated the contribution of charged extracellular matrix (ECM) constituents in maintaining solid stress levels. We found that lower ionic strength leads to elevated solid stresses, consistent with its unshielding effect and the subsequent expansion of charged ECM components. Lastly, we demonstrated that hemorrhagic stroke, accompanied by loss of cellular density, resulted in decreased residual stress in the murine brain. Our findings contribute to a better understanding of spatiotemporal alterations of residual solid stresses in healthy and diseased brains, a crucial step toward uncovering the biological and immunological consequences of this understudied mechanical phenotype in the brain.

Analytical method for reconstructing the stress on a spherical particle from its surface deformation

The mechanical forces that cells experience from the tissue surrounding them are crucial for their behavior and development. Experimental studies of such mechanical forces require a method for measuring them. A widely used approach in this context is bead deformation analysis, where spherical particles are embedded into the tissue. The deformation of the particles then allows to reconstruct the mechanical stress acting on them. Existing approaches for this reconstruction are either very time-consuming or not sufficiently general. In this article, we present an analytical approach to this problem based on an expansion in solid spherical harmonics that allows us to find the complete stress tensor describing the stress acting on the tissue. Our approach is based on the linear theory of elasticity and uses an ansatz specifically designed for deformed spherical bodies. We clarify the conditions under which this ansatz can be used, making our results useful also for other contexts in which this ansatz is employed. Our method can be applied to arbitrary radial particle deformations and requires a very low computational effort. The usefulness of the method is demonstrated by an application to experimental data.

Segregation of co-cultured multicellular systems: review and modeling consideration

Cell segregation caused by collective cell migration (CCM) is crucial for morphogenesis, functional development of tissue parts, and is an important aspect in other diseases such as cancer and its metastasis process. Efficiency of the cell segregation depends on the interplay between: (1) biochemical processes such as cell signaling and gene expression and (2) physical interactions between cells. Despite extensive research devoted to study the segregation of various co-cultured systems, we still do not understand the role of physical interactions in cell segregation. Cumulative effects of these physical interactions appear in the form of physical parameters such as: (1) tissue surface tension, (2) viscoelasticity caused by CCM, and (3) solid stress accumulated in multicellular systems. These parameters primarily depend on the interplay between the state of cell-cell adhesion contacts and cell contractility. The role of these physical parameters on the segregation efficiency is discussed on model systems such as co-cultured breast cell spheroids consisting of two subpopulations that are in contact. This review study aims to: (1) summarize biological aspects related to cell segregation, mechanical properties of cell collectives, effects along the biointerface between cell subpopulations and (2) describe from a biophysical/mathematical perspective the same biological aspects summarized before. So that overall it can illustrate the complexity of the biological systems that translate into very complex biophysical/mathematical equations. Moreover, by presenting in parallel these two seemingly different parts (biology vs. equations), this review aims to emphasize the need for experiments to estimate the variety of parameters entering the resulting complex biophysical/mathematical models.

Magneto-acoustic protein nanostructures for non-invasive imaging of tissue mechanics in vivo

Measuring cellular and tissue mechanics inside intact living organisms is essential for interrogating the roles of force in physiological and disease processes. Current agents for studying the mechanobiology of intact, living organisms are limited by poor light penetration and material stability. Magnetomotive ultrasound is an emerging modality for real-time in vivo imaging of tissue mechanics. Nonetheless, it has poor sensitivity and spatiotemporal resolution. Here we describe magneto-gas vesicles (MGVs), protein nanostructures based on gas vesicles and magnetic nanoparticles that produce differential ultrasound signals in response to varying mechanical properties of surrounding tissues. These hybrid nanomaterials significantly improve signal strength and detection sensitivity. Furthermore, MGVs enable non-invasive, long-term and quantitative measurements of mechanical properties within three-dimensional tissues and in vivo fibrosis models. Using MGVs as novel contrast agents, we demonstrate their potential for non-invasive imaging of tissue elasticity, offering insights into mechanobiology and its application to disease diagnosis and treatment.

Quantifying local stiffness and forces in soft biological tissues using droplet optical microcavities

Mechanical properties of biological tissues fundamentally underlie various biological processes and noncontact, local, and microscopic methods can provide fundamental insights. Here, we present an approach for quantifying the local mechanical properties of biological materials at the microscale, based on measuring the spectral shifts of the optical resonances in droplet microcavities. Specifically, the developed method allows for measurements of deformations in dye-doped oil droplets embedded in soft materials or biological tissues with an error of only 1 nm, which in turn enables measurements of anisotropic stress inside tissues as small as a few pN/μm2. Furthermore, by applying an external strain, Young's modulus can be measured in the range from 1 Pa to 35 kPa, which covers most human soft tissues. Using multiple droplet microcavities, our approach could enable mapping of stiffness and forces in inhomogeneous soft tissues and could also be applied to in vivo and single-cell experiments. The developed method can potentially lead to insights into the mechanics of biological tissues.

Addressing the Mechanical Interaction Between Cancer-Associated Fibroblasts and Cancer Cells by Laser Ablation

Cells within a tumor interact by generating, transmitting, and sensing mechanical forces. Among all the cells of the tumor microenvironment, cancer-associated fibroblasts (CAFs) are a paradigmatic example of mechanical communication. In different steps of tumor progression, CAFs pull and push on cancer cells, regulating cancer cell migration, invasion, compartmentalization, and signaling. There is thus an increasing need to experimentally address mechanical interactions within a tumor. A common technique to measure these interactions is laser ablation. Cutting a tissue region with a high-power laser triggers a sudden tissue displacement whose direction and magnitude reveal the local mechanical stresses. In this chapter, we provide a detailed protocol to perform laser ablations in vitro and ex vivo. First, we describe how to prepare cocultures of primary CAFs and cancer cells and tumor explants. Then, we explain how to perform laser ablations in these two systems and how to analyze the induced tissue displacements using particle image velocimetry (PIV). Overall, we provide a workflow to perform, analyze, and interpret laser ablations to explore tumor mechanical interactions.

Evo-Devo Mechanobiology: The Missing Link

While the modern framework of evolutionary development (evo-devo) has been decidedly genetic, historic analyses have also considered the importance of mechanics in the evolution of form. With the aid of recent technological advancements in both quantifying and perturbing changes in the molecular and mechanical effectors of organismal shape, how molecular and genetic cues regulate the biophysical aspects of morphogenesis is becoming increasingly well studied. As a result, this is an opportune time to consider how the tissue-scale mechanics that underlie morphogenesis are acted upon through evolution to establish morphological diversity. Such a focus will enable a field of evo-devo mechanobiology that will serve to better elucidate the opaque relations between genes and forms by articulating intermediary physical mechanisms. Here, we review how the evolution of shape is measured and related to genetics, how recent strides have been made in the dissection of developmental tissue mechanics, and how we expect these areas to coalesce in evo-devo studies in the future.

Connecting theory and experiment in cell and tissue mechanics

Understanding complex living systems, which are fundamentally constrained by physical phenomena, requires combining experimental data with theoretical physical and mathematical models. To develop such models, collaborations between experimental cell biologists and theoreticians are increasingly important but these two groups often face challenges achieving mutual understanding. To help navigate these challenges, this Perspective discusses different modelling approaches, including bottom-up hypothesis-driven and top-down data-driven models, and highlights their strengths and applications. Using cell mechanics as an example, we explore the integration of specific physical models with experimental data from the molecular, cellular and tissue level up to multiscale input. We also emphasize the importance of constraining model complexity and outline strategies for crosstalk between experimental design and model development. Furthermore, we highlight how physical models can provide conceptual insights and produce unifying and generalizable frameworks for biological phenomena. Overall, this Perspective aims to promote fruitful collaborations that advance our understanding of complex biological systems.

Monitoring the Mechanical Evolution of Tissue During Neural Tube Closure of Chick Embryo

Neural tube closure (NTC) is a critical process during embryonic development. Failure in this process can lead to neural tube defects, causing congenital malformations or even mortality. NTC involves a series of mechanisms on genetic, molecular, and mechanical levels. While mechanical regulation has become an increasingly attractive topic in recent years, it remains largely unexplored due to the lack of suitable technology for conducting mechanical testing of 3D embryonic tissue in situ. In response, we have developed a protocol for quantifying the mechanical properties of chicken embryonic tissue in a non-contact and non-invasive manner. This is achieved by integrating a confocal Brillouin microscope with an on-stage incubation system. To probe tissue mechanics, a pre-cultured embryo is collected and transferred to an on-stage incubator for ex ovo culture. Simultaneously, the mechanical images of the neural plate tissue are acquired by the Brillouin microscope at different time points during development. This protocol includes detailed descriptions of sample preparation, the implementation of Brillouin microscopy experiments, and data post-processing and analysis. By following this protocol, researchers can study the mechanical evolution of embryonic tissue during development longitudinally.

In situ quantification of osmotic pressure within living embryonic tissues

Mechanics is known to play a fundamental role in many cellular and developmental processes. Beyond active forces and material properties, osmotic pressure is believed to control essential cell and tissue characteristics. However, it remains very challenging to perform in situ and in vivo measurements of osmotic pressure. Here we introduce double emulsion droplet sensors that enable local measurements of osmotic pressure intra- and extra-cellularly within 3D multicellular systems, including living tissues. After generating and calibrating the sensors, we measure the osmotic pressure in blastomeres of early zebrafish embryos as well as in the interstitial fluid between the cells of the blastula by monitoring the size of droplets previously inserted in the embryo. Our results show a balance between intracellular and interstitial osmotic pressures, with values of approximately 0.7 MPa, but a large pressure imbalance between the inside and outside of the embryo. The ability to measure osmotic pressure in 3D multicellular systems, including developing embryos and organoids, will help improve our understanding of its role in fundamental biological processes.

Biophysics in tumor growth and progression: from single mechano-sensitive molecules to mechanomedicine

Evidence from physical sciences in oncology increasingly suggests that the interplay between the biophysical tumor microenvironment and genetic regulation has significant impact on tumor progression. Especially, tumor cells and the associated stromal cells not only alter their own cytoskeleton and physical properties but also remodel the microenvironment with anomalous physical properties. Together, these altered mechano-omics of tumor tissues and their constituents fundamentally shift the mechanotransduction paradigms in tumorous and stromal cells and activate oncogenic signaling within the neoplastic niche to facilitate tumor progression. However, current findings on tumor biophysics are limited, scattered, and often contradictory in multiple contexts. Systematic understanding of how biophysical cues influence tumor pathophysiology is still lacking. This review discusses recent different schools of findings in tumor biophysics that have arisen from multi-scale mechanobiology and the cutting-edge technologies. These findings range from the molecular and cellular to the whole tissue level and feature functional crosstalk between mechanotransduction and oncogenic signaling. We highlight the potential of these anomalous physical alterations as new therapeutic targets for cancer mechanomedicine. This framework reconciles opposing opinions in the field, proposes new directions for future cancer research, and conceptualizes novel mechanomedicine landscape to overcome the inherent shortcomings of conventional cancer diagnosis and therapies.

Intravital measurements of solid stresses in tumours reveal length-scale and microenvironmentally dependent force transmission

In cancer, solid stresses impede the delivery of therapeutics to tumours and the trafficking and tumour infiltration of immune cells. Understanding such consequences and the origin of solid stresses requires their probing in vivo at the cellular scale. Here we report a method for performing volumetric and longitudinal measurements of solid stresses in vivo, and findings from its applicability to tumours. We used multimodal intravital microscopy of fluorescently labelled polyacrylamide beads injected in breast tumours in mice as well as mathematical modelling to compare solid stresses at the single-cell and tissue scales, in primary and metastatic tumours, in vitro and in mice, and in live mice and post-mortem tissue. We found that solid-stress transmission is scale dependent, with tumour cells experiencing lower stresses than their embedding tissue, and that tumour cells in lung metastases experience substantially higher solid stresses than those in the primary tumours. The dependence of solid stresses on length scale and the microenvironment may inform the development of therapeutics that sensitize cancer cells to such mechanical forces.

Mechanobiology in oncology: basic concepts and clinical prospects

The interplay between genetic transformations, biochemical communications, and physical interactions is crucial in cancer progression. Metastasis, a leading cause of cancer-related deaths, involves a series of steps, including invasion, intravasation, circulation survival, and extravasation. Mechanical alterations, such as changes in stiffness and morphology, play a significant role in all stages of cancer initiation and dissemination. Accordingly, a better understanding of cancer mechanobiology can help in the development of novel therapeutic strategies. Targeting the physical properties of tumours and their microenvironment presents opportunities for intervention. Advancements in imaging techniques and lab-on-a-chip systems enable personalized investigations of tumor biomechanics and drug screening. Investigation of the interplay between genetic, biochemical, and mechanical factors, which is of crucial importance in cancer progression, offers insights for personalized medicine and innovative treatment strategies.

Tissue Morphogenesis Through Dynamic Cell and Matrix Interactions

Multicellular organisms generate tissues of diverse shapes and functions from cells and extracellular matrices. Their adhesion molecules mediate cell-cell and cell-matrix interactions, which not only play crucial roles in maintaining tissue integrity but also serve as key regulators of tissue morphogenesis. Cells constantly probe their environment to make decisions: They integrate chemical and mechanical information from the environment via diffusible ligand- or adhesion-based signaling to decide whether to release specific signaling molecules or enzymes, to divide or differentiate, to move away or stay, or even whether to live or die. These decisions in turn modify their environment, including the chemical nature and mechanical properties of the extracellular matrix. Tissue morphology is the physical manifestation of the remodeling of cells and matrices by their historical biochemical and biophysical landscapes. We review our understanding of matrix and adhesion molecules in tissue morphogenesis, with an emphasis on key physical interactions that drive morphogenesis.

Evaluation of growth-induced, mechanical stress in solid tumors and spatial association with extracellular matrix content

Mechanical stresses in solid tumors play an important role in tumor progression and treatment efficacy but their quantification is under-investigated. Here, we developed an experimental and computational approach to calculate growth-induced, residual stresses and applied it to the breast (4T1), pancreatic (PAN02), and fibrosarcoma (MCA205) tumor models. Following resection, tumors are embedded in agarose gels and cuts are made in two perpendicular directions to release residual stress. With the use of image processing, the detailed bulging displacement profile is measured and finite elements models of the bulging geometry are developed for the quantification of the stress levels. The mechanical properties of the tumors are measured in vivo prior to resection with shear wave elastography. We find that the average magnitude of residual stresses ranges from 3.31 to 10.88 kPa, and they are non-uniformly distributed within the tissue due to the heterogeneity of the tumor microenvironment. Interestingly, we demonstrate that a second cut can still release a significant amount of stresses. We further find a strong association of spatial hyaluronan and collagen content with the spatial profile of stress for the MCA205 and PAN02 tumors and a partial association for the 4T1. Interestingly the colocalization of hyaluronan and collagen content had a stronger association with the spatial profile of stress for MCA205, PAN02, and 4T1. Finally, measurements of the elastic modulus with shear wave elastography show a nonlinear correlation with tumor volume for the more fibrotic MCA205 and 4T1 tumors. Overall, our results provide insights for a better understanding of the mechanical behavior of tumors.

Using Biosensors to Study Organoids, Spheroids and Organs-on-a-Chip: A Mechanobiology Perspective

The increasing popularity of 3D cell culture models is being driven by the demand for more in vivo-like conditions with which to study the biochemistry and biomechanics of numerous biological processes in health and disease. Spheroids and organoids are 3D culture platforms that self-assemble and regenerate from stem cells, tissue progenitor cells or cell lines, and that show great potential for studying tissue development and regeneration. Organ-on-a-chip approaches can be used to achieve spatiotemporal control over the biochemical and biomechanical signals that promote tissue growth and differentiation. These 3D model systems can be engineered to serve as disease models and used for drug screens. While culture methods have been developed to support these 3D structures, challenges remain to completely recapitulate the cell-cell and cell-matrix biomechanical interactions occurring in vivo. Understanding how forces influence the functions of cells in these 3D systems will require precise tools to measure such forces, as well as a better understanding of the mechanobiology of cell-cell and cell-matrix interactions. Biosensors will prove powerful for measuring forces in both of these contexts, thereby leading to a better understanding of how mechanical forces influence biological systems at the cellular and tissue levels. Here, we discussed how biosensors and mechanobiological research can be coupled to develop accurate, physiologically relevant 3D tissue models to study tissue development, function, malfunction in disease, and avenues for disease intervention.

From cells to form: A roadmap to study shape emergence in vivo

Organogenesis arises from the collective arrangement of cells into progressively 3D-shaped tissue. The acquisition of a correctly shaped organ is then the result of a complex interplay between molecular cues, responsible for differentiation and patterning, and the mechanical properties of the system, which generate the necessary forces that drive correct shape emergence. Nowadays, technological advances in the fields of microscopy, molecular biology, and computer science are making it possible to see and record such complex interactions in incredible, unforeseen detail within the global context of the developing embryo. A quantitative and interdisciplinary perspective of developmental biology becomes then necessary for a comprehensive understanding of morphogenesis. Here, we provide a roadmap to quantify the events that lead to morphogenesis from imaging to image analysis, quantification, and modeling, focusing on the discrete cellular and tissue shape changes, as well as their mechanical properties.

Evidence that tissue recoil in the early Drosophila embryo is a passive not active process

Understanding tissue morphogenesis is impossible without knowing the mechanical properties of the tissue being shaped. Although techniques for measuring tissue material properties are continually being developed, methods for determining how individual proteins contribute to mechanical properties are very limited. Here, we developed two complementary techniques for the acute inactivation of spaghetti squash (the Drosophila myosin regulatory light chain), one based on the recently introduced (auxin-inducible degron 2 (AID2) system, and the other based on a novel method for conditional protein aggregation that results in nearly instantaneous protein inactivation. Combining these techniques with rheological measurements, we show that passive material properties of the cellularization-stage Drosophila embryo are essentially unaffected by myosin activity. These results suggest that this tissue is elastic, not predominantly viscous, on the developmentally relevant timescale.

Geometric Confinement-Mediated Mechanical Tension Directs Patterned Differentiation of Mouse ESCs into Organized Germ Layers

The self-organization of embryonic stem cells (ESCs) into organized tissues with three distinct germ layers is critical to morphogenesis and early development. While the regulation of this self-organization by soluble signals is well established, the involvement of mechanical force gradients in this process remains unclear due to the lack of a suitable platform to study this process. In this study, we developed a 3D microenvironment to examine the influence of mechanical tension gradients on ESC-patterned differentiation during morphogenesis by controlling the geometrical signals (shape and size) of ESC colonies. We found that changes in colony geometry impacted the germ layer pattern, with Cdx2-positive cells being more abundant at edges and in areas with high curvatures. The differentiation patterns were determined by geometry-mediated cell tension gradients, with an extraembryonic mesoderm-like layer forming in high-tension regions and ectodermal-like lineages at low-tension regions in the center. Suppression of cytoskeletal tension hindered ESC self-organization. These results indicate that geometric confinement-mediated mechanical tension plays a crucial role in linking multicellular organization to cell differentiation and impacting tissue patterning.

Engineering tools for quantifying and manipulating forces in epithelia

The integrity of epithelia is maintained within dynamic mechanical environments during tissue development and homeostasis. Understanding how epithelial cells mechanosignal and respond collectively or individually is critical to providing insight into developmental and (patho)physiological processes. Yet, inferring or mimicking mechanical forces and downstream mechanical signaling as they occur in epithelia presents unique challenges. A variety of in vitro approaches have been used to dissect the role of mechanics in regulating epithelia organization. Here, we review approaches and results from research into how epithelial cells communicate through mechanical cues to maintain tissue organization and integrity. We summarize the unique advantages and disadvantages of various reduced-order model systems to guide researchers in choosing appropriate experimental systems. These model systems include 3D, 2D, and 1D micromanipulation methods, single cell studies, and noninvasive force inference and measurement techniques. We also highlight a number of in silico biophysical models that are informed by in vitro and in vivo observations. Together, a combination of theoretical and experimental models will aid future experiment designs and provide predictive insight into mechanically driven behaviors of epithelial dynamics.

Active foam: the adaptive mechanics of 2D air-liquid foam under cyclic inflation

Foam is a canonical example of disordered soft matter where local force balance leads to the competition of many metastable configurations. We present an experimental and theoretical framework for "active foam" where an individual voxel inflates and deflates periodically. Local periodic activity leads to irreversible and reversible T1 transitions throughout the foam, eventually reaching a reversible limit cycle. Individual vertices displace outwards and subsequently return back to their approximate original radial position; this radial displacement follows an inverse law. Surprisingly, each return trajectory does not retrace its outbound path but encloses a finite area, with a clockwise (CW) or counterclockwise (CCW) direction, which we define as a local swirl. These swirls form coherent patterns spanning the scale of the material. Using a dynamical model, we demonstrate that swirl arises from disorder in the local micro-structure. We demonstrate that disorder and strain-rate control a crossover between cooperation and competition between swirls in adjacent vertices. Over 5-10 cycles, the region around the active voxel structurally adapts from a higher-energy metastable state to a lower-energy state, locally ordering and stiffening the structure. The coherent domains of CW/CCW swirl become smaller as the system stabilizes, indicative of a process similar to the Hall-Petch effect. Finally, we introduce a statistical model that evolves edge lengths with a set of rules to explore how this class of materials adapts as a function of initial structure. Adding activity to foam couples structural disorder and adaptive dynamics to encourage the development of a new class of abiotic, cellularized active matter.

Ultrasoft edge-labelled hydrogel sensors reveal internal tissue stress patterns in invasive engineered tumors

Measuring internal mechanical stresses within 3D tissues can provide important insights into drivers of morphogenesis and disease progression. Cell-sized hydrogel microspheres have recently emerged as a powerful technique to probe tissue mechanobiology, as they can be sufficiently soft as to deform within remodelling tissues, and optically imaged to measure internal stresses. However, measuring stresses at resolutions of ∼10 Pa requires ultrasoft, low-polymer content hydrogel formulations that are challenging to label with sufficiently fluorescent materials to support repeated measurements, particularly in optically dense tissues over 100 μm thick, as required in cancer tumor models. Here, we leverage thermodynamic partitioning of hydrogel components to create "edge-labelled" ultrasoft hydrogel microdroplets, in a single polymerization step. Bright and stable fluorescent nanoparticles preferentially polymerize at the hydrogel droplet interface, and can be used to repeatedly track sensor surfaces over long-term experiments, even when embedded deep in light-scattering tissues. We utilize these edge-labelled microspherical stress gauges (eMSGs) in inducible breast cancer tumor models of invasion, and demonstrate distinctive internal stress patterns that arise from cell-matrix interactions at different stages of breast cancer progression. Our studies demonstrate a long-term macroscale compaction of the tumor during matrix encapsulation, but only a short-term increase in local stress as non-invasive tumors rapidly make small internal reorganizations that reduce the mechanical stress to baseline levels. In contrast, once invasion programs are initiated, internal stress throughout the tumor is negligible. These findings suggest that internal tumor stresses may initially prime the cells to invade, but are lost once invasion occurs. Together, this work demonstrates that mapping internal mechanical stress in tumors may have utility in advancing cancer prognostic strategies, and that eMSGs can have broad utility in understanding dynamic mechanical processes of disease and development.

Small hand-designed convolutional neural networks outperform transfer learning in automated cell shape detection in confluent tissues

Mechanical cues such as stresses and strains are now recognized as essential regulators in many biological processes like cell division, gene expression or morphogenesis. Studying the interplay between these mechanical cues and biological responses requires experimental tools to measure these cues. In the context of large scale tissues, this can be achieved by segmenting individual cells to extract their shapes and deformations which in turn inform on their mechanical environment. Historically, this has been done by segmentation methods which are well known to be time consuming and error prone. In this context however, one doesn't necessarily require a cell-level description and a coarse-grained approach can be more efficient while using tools different from segmentation. The advent of machine learning and deep neural networks has revolutionized the field of image analysis in recent years, including in biomedical research. With the democratization of these techniques, more and more researchers are trying to apply them to their own biological systems. In this paper, we tackle a problem of cell shape measurement thanks to a large annotated dataset. We develop simple Convolutional Neural Networks (CNNs) which we thoroughly optimize in terms of architecture and complexity to question construction rules usually applied. We find that increasing the complexity of the networks rapidly no longer yields improvements in performance and that the number of kernels in each convolutional layer is the most important parameter to achieve good results. In addition, we compare our step-by-step approach with transfer learning and find that our simple, optimized CNNs give better predictions, are faster in training and analysis and don't require more technical knowledge to be implemented. Overall, we offer a roadmap to develop optimized models and argue that we should limit the complexity of such models. We conclude by illustrating this strategy on a similar problem and dataset.

Shortwave Infrared Fluorofluorophores for Multicolor In Vivo Imaging

Developing chemical tools to detect and influence biological processes is a cornerstone of chemical biology. Here we combine two tools which rely on orthogonality- perfluorocarbons and multiplexed shortwave infrared (SWIR) fluorescence imaging- to visualize nanoemulsions in real time in living mice. Drawing inspiration from fluorous and SWIR fluorophore development, we prepared two SWIR-emissive, fluorous-soluble chromenylium polymethine dyes. These are the most red-shifted fluorous fluorophores- "fluorofluorophores"-to date. After characterizing the dyes, their utility was demonstrated by tracking perfluorocarbon nanoemulsion biodistribution in vivo. Using an excitation-multiplexed approach to image two variables simultaneously, we gained insight into the importance of size and surfactant identity on biodistribution.

Quantifying stiffness and forces of tumor colonies and embryos using a magnetic microrobot

Stiffness and forces are two fundamental quantities essential to living cells and tissues. However, it has been a challenge to quantify both 3D traction forces and stiffness (or modulus) using the same probe in vivo. Here, we describe an approach that overcomes this challenge by creating a magnetic microrobot probe with controllable functionality. Biocompatible ferromagnetic cobalt-platinum microcrosses were fabricated, and each microcross (about 30 micrometers) was trapped inside an arginine-glycine-apartic acid-conjugated stiff poly(ethylene glycol) (PEG) round microgel (about 50 micrometers) using a microfluidic device. The stiff magnetic microrobot was seeded inside a cell colony and acted as a stiffness probe by rigidly rotating in response to an oscillatory magnetic field. Then, brief episodes of ultraviolet light exposure were applied to dynamically photodegrade and soften the fluorescent nanoparticle-embedded PEG microgel, whose deformation and 3D traction forces were quantified. Using the microrobot probe, we show that malignant tumor-repopulating cell colonies altered their modulus but not traction forces in response to different 3D substrate elasticities. Stiffness and 3D traction forces were measured, and both normal and shear traction force oscillations were observed in zebrafish embryos from blastula to gastrula. Mouse embryos generated larger tensile and compressive traction force oscillations than shear traction force oscillations during blastocyst. The microrobot probe with controllable functionality via magnetic fields could potentially be useful for studying the mechanoregulation of cells, tissues, and embryos.

Extracting, quantifying, and comparing dynamical and biomechanical properties of living matter through single particle tracking

A panoply of new tools for tracking single particles and molecules has led to an explosion of experimental data, leading to novel insights into physical properties of living matter governing cellular development and function, health and disease. In this Perspective, we present tools to investigate the dynamics and mechanics of living systems from the molecular to cellular scale via single-particle techniques. In particular, we focus on methods to measure, interpret, and analyse complex data sets that are associated with forces, materials properties, transport, and emergent organisation phenomena within biological and soft-matter systems. Current approaches, challenges, and existing solutions in the associated fields are outlined in order to support the growing community of researchers at the interface of physics and the life sciences. Each section focuses not only on the general physical principles and the potential for understanding living matter, but also on details of practical data extraction and analysis, discussing limitations, interpretation, and comparison across different experimental realisations and theoretical frameworks. Particularly relevant results are introduced as examples. While this Perspective describes living matter from a physical perspective, highlighting experimental and theoretical physics techniques relevant for such systems, it is also meant to serve as a solid starting point for researchers in the life sciences interested in the implementation of biophysical methods.

Time-lapse mechanical imaging of neural tube closure in live embryo using Brillouin microscopy

Neural tube closure (NTC) is a complex process of embryonic development involving molecular, cellular, and biomechanical mechanisms. While the genetic factors and biochemical signaling have been extensively investigated, the role of tissue biomechanics remains mostly unexplored due to the lack of tools. Here, we developed an optical modality that can conduct time-lapse mechanical imaging of neural plate tissue as the embryo is experiencing neurulation. This technique is based on the combination of a confocal Brillouin microscope and a modified ex ovo culturing of chick embryo with an on-stage incubator. With this technique, for the first time, we captured the mechanical evolution of the neural plate tissue with live embryos. Specifically, we observed the continuous increase in tissue modulus of the neural plate during NTC for ex ovo cultured embryos, which is consistent with the data of in ovo culture as well as previous studies. Beyond that, we found that the increase in tissue modulus was highly correlated with the tissue thickening and bending. We foresee this non-contact and label-free technique opening new opportunities to understand the biomechanical mechanisms in embryonic development.

The role of single protein elasticity in mechanobiology

In addition to biochemical signals and genetic considerations, mechanical forces are rapidly emerging as a master regulator of human physiology. Yet the molecular mechanisms that regulate force-induced functionalities across a wide range of scales, encompassing the cell, tissue or organ levels, are comparatively not so well understood. With the advent, development and refining of single molecule nanomechanical techniques, enabling to exquisitely probe the conformational dynamics of individual proteins under the effect of a calibrated force, we have begun to acquire a comprehensive knowledge on the rich plethora of physicochemical principles that regulate the elasticity of single proteins. Here we review the major advances underpinning our current understanding of how the elasticity of single proteins regulates mechanosensing and mechanotransduction. We discuss the present limitations and future challenges of such a prolific and burgeoning field.

Phenotyping polarization dynamics of immune cells using a lipid droplet-cell pairing microfluidic platform

The immune synapse is the tight contact zone between a lymphocyte and a cell presenting its cognate antigen. This structure serves as a signaling platform and entails a polarization of intracellular components necessary to the immunological function of the cell. While the surface properties of the presenting cell are known to control the formation of the synapse, their impact on polarization has not yet been studied. Using functional lipid droplets as tunable artificial presenting cells combined with a microfluidic pairing device, we simultaneously observe synchronized synapses and dynamically quantify polarization patterns of individual B cells. By assessing how ligand concentration, surface fluidity, and substrate rigidity impact lysosome polarization, we show that its onset and kinetics depend on the local antigen concentration at the synapse and on substrate rigidity. Our experimental system enables a fine phenotyping of monoclonal cell populations based on their synaptic readout.