Functionalized graphene sheets for polymer nanocomposites

Recent Advances in Superspreading-Based Confined Synthesis and Assembly of Functional Nanomaterials

The rapid and complete spreading of liquids on surfaces, which is defined as superspreading, is of great importance in academic research and practical applications. The strong shear flow force during the superspreading process and the obtained confined stable and homogeneous thin liquid layers have great potential in the assembly of functional nanomaterials and confined synthesis. This review aims to summarize the fundamental understanding and emerging applications of superspreading-based confined synthesis and assembly of functional nanomaterials. First, several typical superspreading processes are briefly introduced, followed by highlighting the unique properties and design principles. Then, details about the confined superspreading liquid layers for highly efficient synthesis of functional thin films and the superspreading-induced shear flow to assembly nanomaterials into high-quality nanocomposite materials are presented. The following section then describes the emerging applications of the fabricated functional thin films and nanocomposites. Finally, an outlook for future development is also proposed.

Buckling Analysis of Functionally Graded GPL-Reinforced Composite Plates Under Combined Thermal and Mechanical Loads

The buckling-like mechanical behavior of functionally graded graphene platelet-reinforced composite (FG-GPLRC) structures is increasingly attracting research attention. However, buckling behavior has previously been studied separately as thermal buckling and mechanical buckling. In this context, this study investigates the buckling behavior of FG-GPLRC plates under combined thermal and mechanical loads. The coupled buckling problem is formulated according to the minimum potential energy theorem using first-order shear deformation theory (FSDT). In addition, the problem is approximated by the 2-D natural element method (NEM), and the resulting coupled eigen matrix equations are derived to compute the critical buckling temperature rise (CBTR) and the mechanical buckling load. The developed numerical method can solve thermal, mechanical, and coupled thermo-mechanical buckling problems, and its reliability is examined through convergence and benchmark tests. Using the developed numerical method, the buckling behavior of FG-GPLRC plates under thermal and mechanical buckling loads is examined in depth with respect to the key parameters. In addition, a comparison with functionally graded CNT-reinforced composite (FG-CNTRC) plates is also presented.

Graphene Origami Amplifies Mechanical Properties of Polyethylene Nanocomposites

Graphene and its derivatives have been widely used as reinforcing nanofillers for high-performance polymer nanocomposites. The effectiveness of the reinforcement largely depends on the properties of the nanofiller-matrix interface, which can be represented by the interfacial shear strength (IFSS). This work systematically investigates IFSS enhancements for polyethylene (PE) nanocomposites reinforced by graphene origami (GOri) through molecular dynamics pull-out simulations. When two-dimensional (2D) graphene is transformed into a three-dimensional (3D) origami structure, the resultant GOri/PE nanocomposite exhibits a higher IFSS due to the larger surface roughness of GOri and the associated higher van der Waals interaction strength between the filler and the matrix. Moreover, the incorporation of GOri into the PE matrix leads to more flexible and auxetic nanocomposites due to the unusual properties of GOri. The unique combination of high IFSS, high flexibility, and intrinsic auxeticity makes GOri/PE nanocomposites an ideal candidate for many practical applications, such as impact protection, flexible electronics, and soft robotics.

Ti3C2T x -UHMWPE Nanocomposites-Towards an Enhanced Wear-Resistance of Biomedical Implants

There is an urgent need to enhance the mechanical and biotribological performance of polymeric materials utilized in biomedical devices such as load-bearing artificial joints, notably ultrahigh molecular weight polyethylene (UHMWPE). While two-dimensional (2D) materials like graphene, graphene oxide (GO), reduced GO, or hexagonal boron nitride (h-BN) have shown promise as reinforcement phases in polymer matrix composites (PMCs), the potential of MXenes, known for their chemical inertness, mechanical robustness, and wear-resistance, remains largely unexplored in biotribology. This study aims to address this gap by fabricating Ti3C2T x -UHMWPE nanocomposites using compression molding. Primary objectives include enhancements in mechanical properties, biocompatibility, and biotribological performance, particularly in terms of friction and wear resistance in cobalt chromium alloy pin-on-UHMWPE disk experiments lubricated by artificial synovial fluid. Thereby, no substantial changes in the indentation hardness or the elastic modulus are observed, while the analysis of the resulting wettability and surface tension as well as indirect and direct in vitro evaluation do not point towards cytotoxicity. Most importantly, Ti3C2T x -reinforced PMCs substantially reduce friction and wear by up to 19% and 44%, respectively, which was attributed to the formation of an easy-to-shear transfer film.

Breaking the Intrinsic Strength-Ductility Tradeoff in Graphene-Metal Composites

Small carbon materials, such as graphene, offer excellent mechanical strength. Micro/nano carbon materials are often dispersed into a metal matrix to form bulk composites with mechanical enhancement. Despite technical progress, such composites intrinsically suffer from a trade-off condition between strength and ductility because the load transfer path forms between mechanically strong yet chemically inert micro/nano carbon materials or between the carbon-metal interfaces. In other words, conventional carbon and metal composites become stronger with increasing carbon contents, but the weak interfaces also increase, leading to premature failure. In this regard, crucial advances are presented toward breaking the strength-ductility trade-off condition by utilizing Axially bi-Continuous Graphene-Nickel (ACGN) wires. This innovative ACGN achieves excellent combined strength and ductility-the highest among the current Ni-, Al-, and Cu-based carbon-enhanced metal matrix composites. For example, the ultimate strength and failure strain of 25-µm-diameter ACGN wires are improved by 71.76% and 58.24%, compared to their counterparts. The experimental and theoretical analyses indicate that the graphene-nickel interplay via their axially bi-continuous structure is the main underlying mechanism for the superb mechanical behavior. In specific, the continuous graphene, in addition to effective load-sharing, passivates the free surface of fine wire, forming dislocation pileups along the graphene-nickel interface and, therefore, hindering localized necking.

Reduced Graphene Oxide Reinforces Boron Carbide with High-Pressure and High-Temperature Sintering

Introducing a second phase has been an effective way to solve the brittleness of boron carbide (B4C) for its application. Though reduced graphene oxide (rGO) is an ideal candidate for reinforcing the B4C duo's two-dimensional structure and excellent mechanical properties, the toughness is less than 6 MPa·m1/2, or the hardness is lower than 30 GPa in B4C-graphene composites. A barrier to enhancing toughness is the weak interface strength between rGO and B4C, which limits the bridging and pull-out toughening effects of rGO. In this work, internal stress was introduced using a high-pressure and high-temperature (HPHT) method with B4C-rGO composites. The optimal hardness and toughness values for the B4C-2 vol% rGO composite reached 30.1 GPa and 8.6 MPa·m1/2, respectively. The improvement in toughness was 4 times higher than that of pure B4C. The internal stress in the composite increased gradually from 2.3 GPa to 3.3 GPa with an increase in rGO content from 1 vol% to 3 vol%. Crack deflection, bridging, and rGO pull-out are responsible for the improvement in toughness. Moreover, the high internal stress contributed to the formation of good interface strength by embedding rGO into the B4C matrix particles, which further enhanced the dissipation of the crack energy during the pull-out process and led to high toughness. This work provides new insights into synthesizing high-toughness B4C matrix composites.

Enhanced Thermoelectric Properties of Stable n-Type Ferrocene Derivatives-Doped Polyethylenimine/Single-Walled Carbon Nanotube Composite Films

Preparing stable n-type flexible single-walled carbon nanotube (SWCNT)-based thermoelectric films with high thermoelectric (TE) performance is desirable for self-powering wearable electronics but remains a challenge. Here, the interface regulation and thermoelectric enhancement mechanism of ferrocene derivatives on polyethylenimine/single-walled carbon nanotube (PEI/SWCNT) composite films have been explored by doping ferrocene derivatives (f-Fc-OH) into PEI/SWCNT films. The results show that the introduction of f-Fc-OH leads to the formation of "thorn" structures on the surfaces of SWCNT bundles via hydrophilic and hydrophobic interactions, the generated energy-filtering effect improves the thermoelectric properties of the PEI/SWCNT film, and the f-Fc-OH-doped PEI/SWCNT (f-Fc-OH/PEI/SWCNT) achieves the highest room-temperature power factor of 182.22 ± 8.60 μW m-1 K-2 with a Seebeck coefficient of -64.28 ± 0.96 μV K-1 and the corresponding ZT value of 4.69 × 10-3. The Seebeck coefficient retention ratio of the f-Fc-OH/PEI/SWCNT nearly remained 68% after being exposed to air for 3672 h, while the PEI/SWCNT film changed from n-type to p-type after being exposed to air for about 432 h. In addition, the temperature-dependent thermoelectric properties show that the f-Fc-OH/PEI/SWCNT achieves a high power factor of 334.57 μW m-1 K-2 at 353 K. Finally, a flexible TE module consisting of seven pairs of p-n junctions is assembled using the optimum composite film, which produces an open-circuit voltage of 42 mV and a maximum output power of 4.32 μW at a temperature gradient of 60 K. Therefore, this work provides guidance for preparing stable n-type SWCNT-based composite films with enhanced thermoelectric properties, which have potential applications in flexible generators and wearable electronic devices.

Pristine MOF Materials for Separator Application in Lithium-Sulfur Battery

Lithium-sulfur (Li-S) batteries have attracted significant attention in the realm of electronic energy storage and conversion owing to their remarkable theoretical energy density and cost-effectiveness. However, Li-S batteries continue to face significant challenges, primarily the severe polysulfides shuttle effect and sluggish sulfur redox kinetics, which are inherent obstacles to their practical application. Metal-organic frameworks (MOFs), known for their porous structure, high adsorption capacity, structural flexibility, and easy synthesis, have emerged as ideal materials for separator modification. Efficient polysulfides interception/conversion ability and rapid lithium-ion conduction enabled by MOFs modified layers are demonstrated in Li-S batteries. In this perspective, the objective is to present an overview of recent advancements in utilizing pristine MOF materials as modification layers for separators in Li-S batteries. The mechanisms behind the enhanced electrochemical performance resulting from each design strategy are explained. The viewpoints and crucial challenges requiring resolution are also concluded for pristine MOFs separator in Li-S batteries. Moreover, some promising materials and concepts based on MOFs are proposed to enhance electrochemical performance and investigate polysulfides adsorption/conversion mechanisms. These efforts are expected to contribute to the future advancement of MOFs in advanced Li-S batteries.

Dispersion Characteristics, the Mechanical, Thermal Stability, and Durability Properties of Epoxy Nanocomposites Reinforced with Carbon Nanotubes, Graphene, or Graphene Oxide

Carbon-based nanoparticles (CBNs) are regarded as promising nanofillers in nanocomposites to produce high-performance fiber-reinforced polymers (FRPs). To date, no systematic investigations have been carried out on the structural variations of nanofillers and their influences on dispersion characteristics, which give nanocomposites their mechanical and durability properties. Moreover, environmentally unfriendly organic solvents are used to exfoliate and disperse CBNs in a polymer matrix. This study developed a green, easy approach to preparing epoxy/CBN nanocomposites. We demonstrated graphene oxide's (GO) effective dispersion capacity, creating good interface interaction that dramatically influenced properties at loadings as low as 0.4 wt%. The tensile strength and toughness of the epoxy increased by about 49%; and 160%, respectively. Incorporating 0.4 wt% of multi-wall carbon nanotubes (MWCNTs), graphene nanoplates (GNPs), or GO into the epoxy increased the modulus storage by around 17%, 25%, and 31%, respectively. Fractography analysis of fracture surfaces indicated the primary reinforcing mechanisms (crack deflection and penning) as well as the secondary mechanism (bridging effect) enhancing the mechanical characteristics of nanocomposites. Incorporating GNPs, GO, or MWCNTs into the epoxy decreased the water absorption at saturation by about 26%, 22%, and 16%, respectively.

Polyetherimide (PEI) nanocomposite with WS2 nanotubes

Nanocomposite materials, integrating nanoscale additives into a polymer matrix, hold immense promise for their exceptional property amalgamation. This study delves into the fabrication and characterization of polyetherimide (PEI) nanocomposite strings fortified with multiwall WS2 nanotubes. The manufacturing process capitalizes on the preferential alignment of WS2 nanotubes along the string axis, corroborated by scanning electron microscopy (SEM). Mechanical measurements unveil a remarkable acceleration of strain hardening in the nanocomposite strings, chiefly attributed to the WS2 nanotubes. Structural analyses via X-ray diffraction (XRD) and wide-angle X-ray scattering (WAXS) reveal intriguing structural alterations during tensile deformation. Notably a semi-crystalline framework ∼100 nm in diameter surrounding the WS2 nanotubes emerges, which is stabilized by the π-π interactions between the PEI chains. The amorphous majority phase (97% by volume) undergoes also major structural changes upon strain becoming more compact and closing-up of the distance beweeetn the PEI chains. Dynamic mechanical analysis (DMA) demonstrates improved thermal stability of the evolved semi-crystalline π-π oriented PEI molecules, characterized by delayed thermal "structural melting", underscoring the pivotal role of the WS2 nanotubes in reinforcing the nanocomposite. The insight gained in this study of WS2 nanotube-reinforced PEI nanocomposite strings, could offer diverse applications for such tailor-made polymeric materials.

Development of Light, Strong, and Water-Resistant PVA Composite Aerogels

A significant weakness of many organic and inorganic aerogels is their poor mechanical behaviour, representing a great impediment to their application. For example, polymer aerogels generally have higher ductility than silica aerogels, but their elastic modulus is considered too low. Herein, we developed extremely low loading (<1 wt%) 2D graphene oxide (GO) nanosheets modified poly (vinyl alcohol) (PVA) aerogels via a facile and environmentally friendly method. The aerogel shows a 9-fold increase in compressional modulus compared to a pure polymer aerogel. With a low density of 0.04 mg/mm3 and a thermal conductivity of only 0.035 W/m·K, it outperforms many commercial insulators and foams. As compared to a pure PVA polymer aerogel, a 170% increase in storage modulus is obtained by adding only 0.6 wt% GO nanosheets. The nanocomposite aerogel demonstrates strong fire resistance, with a 50% increase in burning time and little smoke discharge. After surface modification with 1H,1H,2H,2H-Perfluorodecyltriethoxysilane, the aerogel demonstrates water resistance, which is suitable for outdoor applications in which it would be exposed to precipitation. Our research demonstrates a new pathway for considerable improvement in the performance and application of polymer aerogels.

Recent Advances in Graphene-Enabled Materials for Photovoltaic Applications: A Comprehensive Review

Graphene's two-dimensional structural arrangement has sparked a revolutionary transformation in the domain of conductive transparent devices, presenting a unique opportunity in the renewable energy sector. This comprehensive Review critically evaluates the most recent advances in graphene production and its employment in solar cells, focusing on dye-sensitized, organic, and perovskite devices for bulk heterojunction (BHJ) designs. This comprehensive investigation discovered the following captivating results: graphene integration resulted in a notable 20.3% improvement in energy conversion rates in graphene-perovskite photovoltaic cells. In comparison, BHJ cells saw a laudable 10% boost. Notably, graphene's 2D internal architecture emerges as a protector for photovoltaic devices, guaranteeing long-term stability against various environmental challenges. It acts as a transportation facilitator and charge extractor to the electrodes in photovoltaic cells. Additionally, this Review investigates current research highlighting the role of graphene derivatives and their products in solar PV systems, illuminating the way forward. The study elaborates on the complexities, challenges, and promising prospects underlying the use of graphene, revealing its reflective implications for the future of solar photovoltaic applications.

ATR-far-ultraviolet spectroscopy: a challenge to new σ chemistry

This review reports the recent progress on ATR-far ultraviolet (FUV) spectroscopy in the condensed phase. ATR-FUV spectroscopy for liquids and solids enables one to explore various topics in physical chemistry, analytical chemistry, nanoscience and technology, materials science, electrochemistry, and organic chemistry. In this review, we put particular emphasis on the three major topics: (1) studies on electronic transitions and structures of various molecules, which one cannot investigate via ordinary UV spectroscopy. The combined use of ATR-FUV spectroscopy and quantum chemical calculations allows for the investigation of various electronic transitions, including σ, n-Rydberg transitions. ATR-FUV spectroscopy may open a new avenue for σ-chemistry. (2) ATR-FUV spectroscopy enables one to measure the first electronic transition of water at approximately 160 nm without peak saturation. Using this band, one can study the electronic structure of water, aqueous solutions, and adsorbed water. (3) ATR-FUV spectroscopy has its own advantages of the ATR method as a surface analysis method. ATR-FUV spectroscopy is a powerful technique for exploring a variety of top surface phenomena (∼50 nm) in adsorbed water, polymers, graphene, organic materials, ionic liquids, and so on. This review briefly describes the principles, characteristics, and instrumentation of ATR-FUV spectroscopy. Next, a detailed description about quantum chemical calculation methods for FUV and UV regions is given. The recent application of ATR-FUV-UV spectroscopy studies on electronic transitions from σ orbitals in various saturated molecules is introduced first, followed by a discussion on the applications of ATR-FUV spectroscopy to studies on water, aqueous solutions, and adsorbed water. Applications of ATR-FUV spectroscopy in the analysis of other materials such as polymers, ionic liquids, inorganic semiconductors, graphene, and carbon nanocomposites are elucidated. In addition, ATR-FUV-UV-vis spectroscopy focusing on electrochemical interfaces is outlined. Finally, FUV-UV-surface plasmon resonance studies are discussed.

Graphene materials in pollution trace detection and environmental improvement

Water scarcity is a pressing issue experienced in numerous countries and is expected to become increasingly critical in the future. Anthropogenic activities such as mining, agriculture, industries, and domestic waste discharge toxic contaminants into natural water bodies, causing pollution. Addressing these environmental crises requires tackling the challenge of removing pollutants from water. Graphene oxide (GO), a form of graphene functionalized with oxygen-containing chemical groups, has recently garnered renewed interest due to its exceptional properties. These properties include a large surface area, mechanical stability, and adjustable electrical and optical characteristics. Additionally, surface functional groups like hydroxyl, epoxy, and carboxyl groups make GO an outstanding candidate for interacting with other materials or molecules. Because of its expanded structural diversity and enhanced overall properties, GO and its composites hold significant promise for a wide range of applications in energy storage, conversion, and environmental protection. These applications encompass hydrogen storage materials, photocatalysts for water splitting, the removal of air pollutants, and water purification. Serving as electrode materials for various lithium batteries and supercapacitors. Graphene-based materials, including graphene, graphene oxide, reduced graphene oxide, graphene polymer nanocomposites, and graphene nanoparticle metal hybrids, have emerged as valuable tools in energy and environmental remediation technologies. This review article provides an overview of the significant impact of graphene-based materials in various areas. Regarding energy-related topics, this article explores the applications of graphene-based materials in supercapacitors, lithium-ion batteries, and catalysts for fuel cells. Additionally, the article investigates recent advancements in detecting and treating persistent organic pollutants (POPs) and heavy metals using nanomaterials. The article also discusses recent developments in creating innovative nanomaterials, nanostructures, and treatment methods for addressing POPs and heavy metals in water. It aims to present the field's current state and will be a valuable resource for individuals interested in nanomaterials and related materials.

Nanocoating and its application as antimicrobials in the food industry: A review

Nanocoatings are ultra-thin layers on the nanoscale (<100 nm) that are deposited on the substrate to improve their properties and functionality. These nanocoatings provide significant advantages compared to traditional coating, including stain resistance, antimicrobial and antioxidant activities, odor control and delivery of active agents, and liquid repellence properties. In the food industry, nanocoating is widely used in the food packaging sector. In this regard, nanocoating offers antimicrobials and antioxidant properties to active food packaging by incorporating active bioactive compounds into materials used in already existing packaging. The application of nanocoating is applied to these kinds of food packaging with nano coating to improve shelf life, safety, and quality of food packaging. In smart/intelligent packaging, the active packaging coating is promising food packaging, which is designed by releasing preservatives and nanocoating as an antimicrobial, antifungal, antioxidant, barrier coating, and self-cleaning food contact surfaces. In addition, nanocoating can be used for food contact surfaces, kitchen utensils, and food processing equipment to create antimicrobial, antireflective, and dirt-repellent properties. These are critical properties for food processing, especially for meat and dairy processing facilities, which can reduce biofilm formation and prevent cross-contamination. Recently, appreciable growth in the development of the application of nanocoating as edible films for coating food products has emerged to improve food safety issues. In this regard, much scientific research in the area of nanocoating fruits and vegetables, and other food products was performed to address food safety issues. Hence, this promising technology can be a great addition to the agricultural and food industries. Thus, this review addresses the most relevant information about this technology and the applications of nanocoating in the food industry.

Reduced Graphene Oxide Coating LiFePO4 Composite Cathodes for Advanced Lithium-Ion Battery Applications

Recently, the application of LiFePO4 (LFP) batteries in electric vehicles has attracted extensive attention from researchers. This work presents a composite of LFP particles trapped in reduced graphene oxide (rGO) nanosheets obtained through the high-temperature reduction strategy. The obtained LiFePO4/rGO composites indicate spherical morphology and uniform particles. As to the structure mode of the composite, LFP distributes in the interlayer structure of rGO, and the rGO evenly covers the surface of the particles. The LFP/rGO cathodes demonstrate a reversible specific capacity of 165 mA h g-1 and high coulombic efficiency at 0.2 C, excellent rate capacity (up to 10 C), outstanding long-term cycling stability (98%) after 1000 cycles at 5 C. The combined high electron conductivity of the layered rGO coating and uniform LFP particles contribute to the remarkable electrochemical performance of the LFP/rGO composite. The unique LFP/rGO cathode provides a potential application in high-power lithium-ion batteries.

Assessing the impact of ultra-thin diamond nanothreads on the glass transition temperature of a bituminous binder

Low-temperature cracking and rutting are the most destructive problems of bitumen that hinder the application of high-performance bitumen engineering, which is dependent on its glass transition temperature (Tg). Through in silico studies, this work has systematically investigated the Tg of a bituminous binder with the addition of diamond nanothread (DNT) fillers with varying filler content, alignment, distribution, and functional groups. In general, the glass transition phenomenon of the bitumen is determined by the mobility of its constituent molecules. Tg is found to increase gradually with the increase in the weight percentage of DNT and then decreases when the weight percentage exceeds 5.05 wt%. The enhancement effect on Tg is weakened when DNTs are distributed vertically or functionalized with functional groups. Specifically, DNT fillers induce inhomogeneity, which promotes the motion of small molecules while hindering the motion of large molecules. The aggregation of DNTs and the molecular environment in the vicinity of DNTs directly affect Tg. In summary, aggregation and adhesion are the dominant mechanisms affecting the mobility of the constituent molecules in the DNT/bitumen system and thus its glass transition temperature. This work provides in-depth insights into the underlying mechanisms for the glass transition of a bituminous binder, which could serve as theoretical guidance for tuning the low-temperature performance of the bituminous binder.

Recent Progress of Low Dielectric and High-Performance Polybenzoxazine-Based Composites

With the rapid advancement of intelligent electronics, big data platforms, and other cutting-edge technologies, traditional low dielectric polymer matrix composites are no longer sufficient to satisfy the application requirements of high-end electronic information materials, particularly in the realm of high integration and high-frequency, high-speed electronic communication device manufacturing. Consequently, resin-based composites with exceptional low dielectric properties have garnered unprecedented attention. In recent years, benzoxazine-based composites have piqued the interest of scholars in the fields of high-temperature-resistant, low dielectric electronic materials due to their remarkable attributes such as high strength, high modulus, high heat resistance, low curing shrinkage, low thermal expansion coefficient, and excellent flame retardancy. This article focuses on the design and development of modification of polybenzoxazine based on low dielectric polybenzoxazine modification methods. Studies on manufacturing polybenzoxazine co-polymers and benzoxazine-based nanocomposites have also been reviewed.

Investigation of Thermal, Mechanical and Shape Memory Properties of 3D-Printed Functionally Graded Nanocomposite Materials

In this study, a 3D-printed photocurable resin was developed by incorporating graphene nanoplatelets functionalised with melamine to investigate the thermal, mechanical, fracture and shape memory behaviours. The objective of this work was to produce a printed functionally graded nanocomposite material that has a smart temperature-responsive structure; presents good thermal stability, strength and fracture toughness; and can demonstrate shape-changing motions, such as sequential transformations, over time. The functionalised graphene nanoplatelets were examined via thermogravimetric analysis, Fourier transform infrared spectroscopy, Raman spectroscopy and ultraviolet-visible spectroscopy. Thermogravimetric analysis showed that the degradation temperature of the nanocomposite containing 0.1 wt% of functionalised graphene nanoplatelets at the weight loss of 5% was 304 °C, greater than that of the neat one by 29%. Dynamic mechanical analysis results showed property enhancements of the storage modulus and glass transition temperature. Fracture toughness, tensile strength and impact resistance were improved by 18%, 35% and 78%, respectively. The shape memory tests were performed to obtain the temperature-time recovery behaviour of the 3D-printed structures. The addition of functionalised graphene nanoplatelets demonstrated an enhancement in the shape recovery ratios. Generally, the five subsequent cycles were notably stable with a high recovery ratio of 97-100% for the flat shape and circular shape of the M-GNP specimens. On the other hand, these values were between 91% and 94% for the corresponding neat specimens.

A Molecular Dynamics Simulation Study on Enhancement of Mechanical and Tribological Properties of Nitrile-Butadiene Rubber with Varied Contents of Acrylonitrile

The molecular models of nitrile-butadiene rubber (NBR) with varied contents of acrylonitrile (ACN) were developed and investigated to provide an understanding of the enhancement mechanisms of ACN. The investigation was conducted using molecular dynamics (MD) simulations to calculate and predict the mechanical and tribological properties of NBR through the constant strain method and the shearing model. The MD simulation results showed that the mechanical properties of NBR showed an increasing trend until the content of ACN reached 40%. The mechanism to enhance the strength of the rubber by ACN was investigated and analyzed by assessing the binding energy, radius of gyration, mean square displacement, and free volume. The abrasion rate (AR) of NBR was calculated using Fe-NBR-Fe models during the friction processes. The wear results of atomistic simulations indicated that the NBR with 40% ACN content had the best tribological properties due to the synergy among appropriate polarity, rigidity, and chain length of the NBR molecules. In addition, the random forest regression model of predicted AR, based on the dataset of feature parameters extracted by the MD models, was developed to obtain the variable importance for identifying the highly correlated parameters of AR. The torsion-bend-bend energy was obtained and used to successfully predict the AR trend on the new NBR models with other acrylonitrile contents.

Large Amplitude Vibration of FG-GPL Reinforced Conical Shell Panels on Elastic Foundation

Functionally graded (FG) composite structures reinforced by graphene platelets (GPL) have been widely adopted as a state-of-the-art structural element due to their preeminent properties and functional designability. However, most studies are confined to beams, plates, and cylindrical panels, relying on the numerical differential quadrature method (DQM) and the finite element numerical method. In this context, the current study intends to investigate the nonlinear free vibration of FG-GPL-reinforced composite (RC) conical panels resting on an elastic medium by developing a 2-D planar meshfree method-based nonlinear numerical method. The nonlinear free vibration problem is expressed by the first-order shell deformation theory and the von-Kármán nonlinearity. The complex conical neutral surface of the panel is transformed into a 2-D rectangular plane to avoid painstaking mathematical manipulation. The troublesome shear-membrane locking is suppressed by employing the MITC3+shell element, and the derived nonlinear modal equations are solved by introducing a three-step direct iterative scheme. The present method is compared with the DQM through the benchmark experiment, from which a good agreement between the two methods is observed. And, the nonlinear free vibration characteristics of FG-GPLRC conical panels on an elastic foundation are profoundly investigated, and it is found that those are significantly influenced by the foundation stiffness, the amount and dispersion pattern of GPLs, the panel geometry sizes, and the boundary condition.

Unveiling the Fatigue Behavior of 2D Hybrid Organic-Inorganic Perovskites: Insights for Long-Term Durability

2D hybrid organic-inorganic perovskites (HOIPs) are commonly found under subcritical cyclic stresses and suffer from fatigue issues during device operation. However, their fatigue properties remain unknown. Here, the fatigue behavior of (C4 H9 -NH3 )2 (CH3 NH3 )2 Pb3 I10 , the archetype 2D HOIP, is systematically investigated by atomic force microscopy (AFM). It is found that 2D HOIPs are much more fatigue resilient than polymers and can survive over 1 billion cycles. 2D HOIPs tend to exhibit brittle failure at high mean stress levels, but behave as ductile materials at low mean stress levels. These results suggest the presence of a plastic deformation mechanism in these ionic 2D HOIPs at low mean stress levels, which may contribute to the long fatigue lifetime, but is inhibited at higher mean stresses. The stiffness and strength of 2D HOIPs are gradually weakened under subcritical loading, potentially as a result of stress-induced defect nucleation and accumulation. The cyclic loading component can further accelerate this process. The fatigue lifetime of 2D HOIPs can be extended by reducing the mean stress, stress amplitude, or increasing the thickness. These results can provide indispensable insights into designing and engineering 2D HOIPs and other hybrid organic-inorganic materials for long-term mechanical durability.

Role of graphene in scavenging methyl cations: a DFT study

CONTEXT

It is known that methylating agents methylate DNA by transferring a methyl cation (CH3+) to the nucleophilic sites in DNA bases and DNA methylation is implicated in cancer and other pathological conditions. Therefore, it is important to scavenge CH3+ ion in order to protect DNA from methylation. Graphene is considered to be a versatile material for use in a wide variety of fields including sensors, antioxidants, drug delivery and DNA sequencing. In this work, we have theoretically investigated the interaction of CH3+ ions with graphene surface with an aim to understand if pristine graphene can be used as a substrate to adsorb CH3+ cations generated from harmful methylating agents. The computed adsorption energies show that adsorption of one, two and three CH3+ ions on graphene is favourable as the adducts thus formed are found to be substantially stable in both gas phase and aqueous media. The Bader charge transfer analysis and density of states (DOS) calculation also indicate a strong interaction between graphene and CH3+ ions. Thus, our results show that pristine graphene can be used as a substrate to scavenge CH3+ ions.

METHODS

The spin polarised density functional theory (DFT) calculations employing PBE functional, ultrasoft pseudopotentials and plane wave basis set having kinetic energy cut-offs of 40 Ry and 400 Ry, respectively, for wave functions and charge densities were carried out to study the adsorption of CH3+ ion(s) on the pristine graphene surface. The Grimme's DFT-D2 method was used for the estimation of van der Waals interactions. The 'dipole correction' along z-direction was also applied for adsorption study. The Marzari-Vanderbilt smearing and Monkhorst-Pack k-point grid were employed for the Brillouin zone sampling. A 6 × 6 graphene supercell with a vertical cell dimension of 18 Å was considered for the adsorption study. The charge transfer between the CH3+ ion(s) and graphene was estimated using Bader charge analysis. The implicit solvation model (SCCS) was used to estimate the solvent effect of aqueous media. All the calculations were performed using QUANTUM ESPRESSO package.

Rational design of antimicrobial peptide conjugated graphene-silver nanoparticle loaded chitosan wound dressing

Wound dressing with poor antibacterial properties, the tendency to adhere to the wound site, poor mechanical strength, and lack of porosity and flexibility are the major cause of blood loss, delayed wound repair, and sometimes causes death during the trauma or injury. In such cases, hydrogel-based antibacterial wound dressing would be a boon to the existing dressing as the moist environment will maintain the cooling temperate and proper exchange of atmosphere around the wound. In the present study, the multifunctional graphene with silver and ε-Poly-l-lysine reinforced into the chitosan matrix (CGAPL) was prepared as a nanobiocomposite wound dressing. The contact angle measurement depicted the hydrophilic property of CGAPL nanobiocomposite dressing (water contact angle 42°), while the mechanical property was 78.9 MPa. The antibacterial and cell infiltration study showed the antimicrobial property of CGAPL nanobiocomposite wound dressing. It also demonstrated no cytotoxicity to the L929 fibroblast cells. Chorioallantoic Membrane (CAM) assay showed the pro-angiogenic potential of CGAPL nanobiocomposite wound dressing. In-vitro scratch wound assay confirmed the migration of cells and increased cell adhesion and proliferation within 18 h of culture on the surface of CGAPL nanobiocomposite dressing. Later, the in-vivo study in the Wistar rat model showed that CGAPL nanobiocomposite dressing significantly enhanced the wound healing process as compared to the commercially available wound dressing Tegaderm (p-value <0.01) and Fibroheal@Ag (p-value <0.005) and obtained complete wound closure in 14 days. Histology study further confirmed the complete healing process, re-epithelization, and thick epidermis tissue formation. The proposed CGAPL nanobiocomposite wound dressing thus offers a novel wound dressing material with an efficient and faster wound healing property.

Band Gap Engineering in Two-Dimensional Materials by Functionalization: Methylation of Graphene and Graphene Bilayers

Graphene is well-known for its unique combination of electrical and mechanical properties. However, its vanishing band gap limits the use of graphene in microelectronics. Covalent functionalization of graphene has been a common approach to address this critical issue and introduce a band gap. In this Article, we systematically analyze the functionalization of single-layer graphene (SLG) and bilayer graphene (BLG) with methyl (CH₃) using periodic density functional theory (DFT) at the PBE+D3 level of theory. We also include a comparison of methylated single-layer and bilayer graphene, as well as a discussion of different methylation options (radicalic, cationic, and anionic). For SLG, methyl coverages ranging from 1/8 to 1/1, (i.e., the fully methylated analogue of graphane) are considered. We find that up to a coverage θ of 1/2, graphene readily accepts CH₃, with neighbor CH₃ groups preferring trans positions. Above θ = 1/2, the tendency to accept further CH₃ weakens and the lattice constant increases. The band gap behaves less regularly, but overall it increases with increasing methyl coverage. Thus, methylated graphene shows potential for developing band gap-tuned microelectronics devices and may offer further functionalization options. To guide in the interpretation of methylation experiments, vibrational signatures of various species are characterized by normal-mode analysis (NMA), their vibrational density of states (VDOS), and infrared (IR) spectra, the latter two are obtained from ab initio molecular dynamics (AIMD) in combination with a velocity-velocity autocorrelation function (VVAF) approach.

Transforming Wound Management: Nanomaterials and Their Clinical Impact

Wound healing is a complex process that can be further complicated in chronic wounds, leading to prolonged healing times, high healthcare costs, and potential patient morbidity. Nanotechnology has shown great promise in developing advanced wound dressings that promote wound healing and prevent infection. The review article presents a comprehensive search strategy that was applied to four databases, namely Scopus, Web of Science, PubMed, and Google Scholar, using specific keywords and inclusion/exclusion criteria to select a representative sample of 164 research articles published between 2001 and 2023. This review article provides an updated overview of the different types of nanomaterials used in wound dressings, including nanofibers, nanocomposites, silver-based nanoparticles, lipid nanoparticles, and polymeric nanoparticles. Several recent studies have shown the potential benefits of using nanomaterials in wound care, including the use of hydrogel/nano silver-based dressings in treating diabetic foot wounds, the use of copper oxide-infused dressings in difficult-to-treat wounds, and the use of chitosan nanofiber mats in burn dressings. Overall, developing nanomaterials in wound care has complemented nanotechnology in drug delivery systems, providing biocompatible and biodegradable nanomaterials that enhance wound healing and provide sustained drug release. Wound dressings are an effective and convenient method of wound care that can prevent wound contamination, support the injured area, control hemorrhaging, and reduce pain and inflammation. This review article provides valuable insights into the potential role of individual nanoformulations used in wound dressings in promoting wound healing and preventing infections, and serves as an excellent resource for clinicians, researchers, and patients seeking improved healing outcomes.

Crumpling Defective Graphene Sheets

Upon crumpling, graphene sheets yield intriguing hierarchical structures with high resistance to compression and aggregation, garnering a great deal of attention in recent years for their remarkable potential in a variety of applications. Here, we aim to understand the effect of Stone-Wales (SW) defects, i.e., a typical topological defect of graphene, on the crumpling behavior of graphene sheets at a fundamental level. By employing atomistically informed coarse-grained molecular dynamics (CG-MD) simulations, we find that SW defects strongly influence the sheet conformation as manifested by the change in size scaling laws and weaken the self-adhesion of the sheet during the crumpling process. Remarkably, the analyses of the internal structures (i.e., local curvatures, stresses, and cross-section patterns) of crumpled graphene emphasize the enhanced mechanical heterogeneity and "glass-like" amorphous state elicited by SW defects. Our findings pave the way for understanding and exploring the tailored design of crumpled structure via defect engineering.

Free Vibration Analysis of Functionally Graded Porous Cylindrical Panels Reinforced with Graphene Platelets

The free vibration of functionally graded porous cylindrical shell panels reinforced with graphene platelets (GPLs) was numerically investigated. The free vibration problem was formulated using the first-order shear deformation shell theory in the framework of the 2-D natural element method (NEM). The effective material properties of the GPL-reinforced shell panel were evaluated by employing the Halpin-Tsai model and the rule of mixtures and were modified by considering the porosity distribution. The cylindrical shell surface was transformed into the 2-D planar NEM grid to avoid complex computation, and the concept of the MITC3+shell element was employed to suppress shear locking. The numerical method was validated through benchmark experiments, and the free vibration characteristics of FG-GPLRC porous cylindrical shell panels were investigated. The numerical results are presented for four GPL distribution patterns (FG-U, FG-X, FG-O, and FG-Λ) and three porosity distributions (center- and outer-biased and uniform). The effects of GPL weight, porosity amount, length-thickness and length-radius ratios, and the aspect ratio of the shell panel and boundary condition on the free vibration characteristics are discussed in detail. It is found from the numerical results that the proposed numerical method accurately predicts the natural frequencies of FG-GPLRC porous cylindrical shell panels. Moreover, the free vibration of FG-GPLRC porous cylindrical shell panels is significantly influenced by the distribution pattern as well as the amount of GPLs and the porosity.

Phase Change Composite Microcapsules with Low-Dimensional Thermally Conductive Nanofillers: Preparation, Performance, and Applications

Phase change materials (PCMs) have been extensively utilized in latent thermal energy storage (TES) and thermal management systems to bridge the gap between thermal energy supply and demand in time and space, which have received unprecedented attention in the past few years. To effectively address the undesirable inherent defects of pristine PCMs such as leakage, low thermal conductivity, supercooling, and corrosion, enormous efforts have been dedicated to developing various advanced microencapsulated PCMs (MEPCMs). In particular, the low-dimensional thermally conductive nanofillers with tailorable properties promise numerous opportunities for the preparation of high-performance MEPCMs. In this review, recent advances in this field are systematically summarized to deliver the readers a comprehensive understanding of the significant influence of low-dimensional nanofillers on the properties of various MEPCMs and thus provide meaningful enlightenment for the rational design and multifunction of advanced MEPCMs. The composition and preparation strategies of MEPCMs as well as their thermal management applications are also discussed. Finally, the future perspectives and challenges of low-dimensional thermally conductive nanofillers for constructing high performance MEPCMs are outlined.

Effect of functionalized graphene addition on mechanical and thermal properties of high density polyethylene

High density polyethylene (HDPE)/graphene nanocomposites were successfully synthesized by compounding of HDPE, as polymer matrix, with hexamethylenediamine functionalized graphene. The resulting nanocomposite was characterized using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction analysis (XRD), scanning electron microscope (SEM) and thermal gravimetric analysis (TGA) techniques. SEM characterization confirmed the good dispersion (homogeneous and uniform) of graphene in the polyethylene matrix. The TGA technique revealed a slight improvement in thermal resistance. Functionalized graphene improved a better thermal stability of HDPE (up to 6 °C) than non-functionalized graphene (up to 2 °C). Mechanical tensile and torsion tests showed that HDPE/functionalized graphene nanocomposites exhibit high tensile strength and low torsional strength compared to HDPE/non-functionalized graphene nanocomposites. Compared to pure HDPE, the Young’s modulus increased by 80% and 30%, whereas, the torsion modulus increased by about 34% and 44% for the HDPE/functionalized and HDPE/non-functionalized graphene, respectively. Regardless of this increase, it can be seen that the torsion modulus of HDPE/non-functionalized graphene is much higher than that of HDPE/functionalized graphene.

Synthesis and investigation on microstructural, mechanical features of mesoporous hardystonite/reduced graphene oxide nanocomposite for medical applications

The use of hardystonite (Ca2ZnSi2O7, HT)-based composites could be one the main strategies to improve mechanical properties closing to natural bone. However, there are a few reports in this regard. Recent findings indicate that graphene is a promising biocompatible additive in ceramic-based composite. Here, we propose a simple approach for the synthesis of porous nano- and microstructured hardystonite/reduced graphene oxide (HT/RGO) composite using a sol-gel method followed by ultrasonic and hydrothermal processes. Integrating GO to the pure HT increased the bending strength and toughness values about 27.59% and 34.33%, respectively. It also allowed the increment of compressive strength and compressive modulus by about 8.18% and 86%, respectively, and improvement in the fracture toughness about 11.8 times compared to pure HT. The formation of HT/RGO nanocomposites with different RGO weight percentages ranging from 0 to 5.0 has been investigated by scanning electron microscopy (SEM) and X-ray diffraction and the efficient incorporation of GO nanosheets into HT nanocomposite as well as the mesoporous structural properties were also confirmed by Raman, FTIR and BET analyses. The cell viability of HT/RGO composite scaffolds was assayed by methyl thiazole tetrazolium (MTT) test in vitro. In this regard, the alkaline phosphatase (ALP) activity and the proliferation rate of mouse osteoblastic cells (MC3T3-E1) on the HT/1 wt. % RGO composite scaffold enhanced in comparison with the pure HT ceramic. The adhesion of osteoblastic cells on the 1% wt. HT/RGO scaffold was interesting as well. In addition, the effect of 1% wt. HT/RGO extract on the proliferation of osteoblast human G-292 cells was successfully evaluated and remarkable observations were obtained. All together it can be said that the proposed bioceramic hardystonite/reduced graphene oxide composites can be a promising candidate for designing hard tissue implants.

Research on the synergistic modification effect and the interface mechanism of GO/SBS compound-modified asphalt based on experiments and molecular simulations

Although there have been reports showing the modification effect of carbon nanomaterials on asphalt, there are few studies on whether carbon nanomaterials and polymers can have synergistic modification effects on asphalt. At the same time, the complex composition of asphalt makes it difficult to determine the interface mechanism between the modifier and the asphalt. In this study, graphene oxide (GO) and styrene-butadiene-styrene block copolymer (SBS) were selected as modifiers. A combined experimental and molecular simulation research method was used to study the synergistic modification effect and the interface mechanism between the modifier and the asphalt. The results show that the modification effect of GO/SBS incorporated into asphalt is significantly superior to that of GO or SBS incorporated individually and GO/SBS has a synergistic modification effect. Although the binding strength between SBS and asphalt is weak, the GO surface (GO (0 0 1)) can simultaneously bind with SBS and asphalt, increasing the binding strength of SBS and asphalt as well as promoting the dispersion of SBS in asphalt, so that GO/SBS shows a synergistic modification effect and improves properties such as low-temperature ductility, rheology and storage stability at macroscopic level. Intercalated and exfoliated structure can be formed between GO side (GO (0 1 0)) and asphalt, which improves the anti-aging properties of the asphalt. Physical bonding is the main interface binding for GO/SBS compound-modified asphalt. GO bonds to asphalt or SBS by hydrogen bonds and there are only dispersion forces between SBS and asphalt, resulting in a higher binding strength between GO and asphalt or SBS than between SBS and asphalt.

Improved Strength and Heat Distortion Temperature of Emi-Aromatic Polyamide 10T-co-1012 (PA10T/1012)/GO Composites via In Situ Polymerization

In this paper, an effective method for preparing poly (p-phenylene terephthalamide) -co- poly (dodecanedioyl) decylamine (PA10T/1012)/graphene oxide (GO) composites by pre-dispersion and one-step in situ polymerization was proposed for the first time. During the process of polycondensation, the condensation between the terminal amino groups of PA10T/1012 chains and the oxygen-containing functional groups of GO allowed nylon to be grafted onto graphene sheets. The effects of polymer grafting on the thermal and mechanical properties of (PA10T/1012)/GO composites were studied in detail. Due to the interaction between PA10T/1012 grafted graphene sheets and its matrix, GO is well dispersed in the PA10T/1012 matrix and physically entangled with it, forming a cross-linked network structure of polymer bridged graphene, thus obtaining enhanced tensile strength, tensile modulus and impact strength. More importantly, benefiting from the cross-linked network structure, the heat distortion temperature (HDT) of the composite is greatly increased from 77.3 °C to 144.2 °C. This in situ polycondensation method opens a new avenue to prepare polycondensate graphene-based composites with high strength and high heat distortion temperatures.

Assessment of graphene-based polymers for sustainable wastewater treatment: Development of a soft computing approach

Since graphene possesses distinct electrical and material properties that could improve material performance, there is currently a growing demand for graphene-based electronics and applications. Numerous potential applications for graphene include lightweight and high-strength polymeric composite materials. Due to its structural qualities, which include low thickness and compact 2D dimensions, it has also been recognized as a promising nanomaterial for water-barrier applications. For barrier polymer applications, it is usually applied using two main strategies. The first is the application of graphene, graphene oxide (GO), and reduced graphene oxide (rGO) to polymeric substrates through transfer or coating. In the second method, fully exfoliated GO or rGO is integrated into the material. This study provides an overview of the most recent findings from research on the use of graphene in the context of water-barrier applications. The advantages and current limits of graphene-based composites are compared with those of other nanomaterials utilized for barrier purposes in order to emphasize difficult challenges for future study and prospective applications.

Positive/Negative Temperature Coefficient Behaviors of Electron Beam-Irradiated Carbon Blacks-Loaded Polyethylene Nanocomposites

Polymer-based materials with positive temperature coefficients (PTC) are regarded as potential candidates for electrical heating elements in a wide range of applications, such as wearable electronics, soft robots, and smart skin. They offer many advantages over ceramic or metal oxide-based composites, including low resistance at room temperature, excellent flexibility and processability, and low cost. However, the electrical resistance instability and poor reproducibility have limited their use in practical applications. In this work, we prepared carbon blacks-reinforced high-density polyethylene nanocomposites (CBs-HDPE) loaded with polar additives (polyols or ionomers), which were subsequently subjected to electron beam (EB) irradiation to explore their PTC behaviors. We found that the EB-treated nanocomposites exhibited PTC behaviors, while the untreated samples showed negative temperature coefficients. Further, EB-ionomer-CBs-HDPE showed the highest PTC intensity of 3.01 Ω·cm, which was ∼35% higher than that of EB-CBs-HDPE. These results suggested that the EB irradiation enabled a specific volume expansion behavior via enhanced crosslinking among CBs, polar additives, and HDPE, inhibiting the formation of conductive networks in the nanocomposites. Thus, it can be concluded that polar additives and further EB irradiation played an important role in enhancing the PTC performances. We believe the findings provide crucial insight for designing carbon-polymer nanocomposites with PTC behaviors in various self-regulating heating devices.

Challenges and issues with the performance of boron nitride rooted membrane for gas separation

Various fillers such as zeolites, metal-organic framework, carbon, metal framework, graphene, and covalent organic framework have been incorporated into the polymers. However, these materials are facing issues such as incompatibility with the polymer matrix, which leads to the formation of non-selective voids and thus, reduces the gas separation properties. Recent studies show that hexagonal boron nitride (h-BN) possesses attractive characteristics such as high aspect ratio, good compatibility with polymer materials, enhanced gas barrier performance, and improved mechanical properties, which could make h-BN the potential candidate to replace conventional fillers. The synthesis of materials and membranes is the subject of this review, which focuses on recent developments and ongoing problems. Additionally, a summary of the mathematical models that were utilised to forecast how well polymer composites would perform in gas separation is provided. It was found in the previous studies that tortuosity is the governing factor for the determination of the effectiveness of a nanofiller as a gas barrier enhancer in polymer matrices. The shape of the nanofiller particles and sheets, disorientation and distribution of the nanofillers within the polymer matrix, state of aggregation and rate of reaggregation of the nanofiller particles, as well as the compatibility of the nanofiller with the polymer matrix all played a significant role in determining how well a particular nanofiller will perform in enhancing the gas barrier properties of the nanocomposites. For this purpose, this review has been focused not only on the experimentation work but also on the effect of tortuosity, exfoliation quality, compatibility, disorientation, and reaggregation of nanofillers.

Sustainable valorization of asphaltenes via flash joule heating

The refining process of petroleum crude oil generates asphaltenes, which poses complicated problems during the production of cleaner fuels. Following refining, asphaltenes are typically combusted for reuse as fuel or discarded into tailing ponds and landfills, leading to economic and environmental disruption. Here, we show that low-value asphaltenes can be converted into a high-value carbon allotrope, asphaltene-derived flash graphene (AFG), via the flash joule heating (FJH) process. After successful conversion, we develop nanocomposites by dispersing AFG into a polymer effectively, which have superior mechanical, thermal, and corrosion-resistant properties compared to the bare polymer. In addition, the life cycle and technoeconomic analysis show that the FJH process leads to reduced environmental impact compared to the traditional processing of asphaltene and lower production cost compared to other FJH precursors. Thus, our work suggests an alternative pathway to the existing asphaltene processing that directs toward a higher value stream while sequestering downstream emissions from the processing.

Application of nanotechnology in food: processing, preservation, packaging and safety assessment

Even though nanotechnology is extensively applied in agriculture, biochemistry, medicine and many other sectors, it is a developing field that conforms to new and more complex applications in food systems as compared to other technologies. It offers a viable strategy for integrating cutting-edge technology into a wide range of operations related to the production, development, fabrication, packaging, storage and distribution of food. The most fundamentally sophisticated technology in nano-based food science, nanoparticles deal with a wide range of nanostructured materials and nano methods, including nanofood, nanotubes, nanocomposites, nano packaging, nanocapsules, nanosensors, liposomes, nanoemulsions, polymeric nanoparticles and nanoencapsulation. This method is developed to increase food solubility and shelf life, availability of bioactive chemical, the protection of food constituents, nutritional supplementation, fortification and food or constituent delivery. Additionally, it serves as an antibacterial agent by generating reactive oxygen species (ROS) which cause bacterial DNA damage, protein denaturation and cell damage. Although the use of nanotechnology in food applications is advancing, there are certain negative or dangerous effects on health related to the toxicity and dangers of ingesting nanoparticles in food. The use of nanotechnology in the food industry, notably in processing, preservation and packaging, with its promising future, was addressed in this study. The toxicity of nanoparticles in food as well as its development in food safety assessments with certain areas of concern were also reviewed.

Stress Relaxation Behavior of Poly(Methyl Methacrylate)/Graphene Composites: Ultraviolet Irradiation

The graphene/poly (methyl methacrylate) (PMMA) composites are a promising candidate for electronic, optoelectrical, and environmental applications. Understanding the mechanical degradation of PMMA-based materials is of practical importance in improving the reliability and lifespan of the associated structures and systems. In this study, we investigate the effects of functionalized graphene (FG) and UV irradiation on the stress-relaxation of PMMA. Uniaxial tensile and stress -relaxation tests are performed to evaluate the mechanical properties of the composites. The mechanical strength and elongation at the break increase with the graphene concentration but decrease with the increase of the irradiation dose. Raman spectroscopy and intrinsic viscosity measurement are applied to examine the root cause of the degradation in the composites. UV irradiation leads to polymer chain scission and loss of molecular weight. The Kelvin representation of the standard linear solid model (SLSM) is used to describe the stress-relaxation curves of the composites. The value of the elastic modulus in the Kelvin element decreases with the increase in temperature. The viscosity follows the Arrhenius equation. The activation energy of viscosity increases with the increasing FGs concentration because the FGs hinder the chain motion of PMMA. However, UV irradiation makes chain scission of PMMA/FGs composite so that the polymer chain moves more easily and the activation energy of stress relaxation lowers. The steady-state stress follows the van 't Hoff equation that stress relaxation is an exothermal deformation process. Although Maxwell's representation of SLSM is mathematically identical to the Kelvin representation of SLSM, the former cannot interpret the stress-relaxation behavior of PMMA/FGs composite, which is against the concept of Young's modulus as a decreasing temperature function.

Effect of terephthalic acid functionalized graphene oxide on the molecular interaction, and mechanical and thermal properties of Hytrel polymer

We report the effect of incorporating functionalized graphene oxide (terephthalic acid functionalized GO; GO-g-TPA) on the thermal and mechanical properties of Hytrel (HTL; a thermoplastic elastomeric polymer). Initially, the synthesis of GO-g-TPA was performed via chemical methods and subsequently characterized using various spectroscopic and imaging techniques. The melt mixing technique was executed in preparing the nanocomposites of HTL/GO and HTL/GO-g-TPA. An excellent GO dispersion was observed in the HTL polymeric matrix, which could be attributed to the significant effect of hydrogen bonding and π-π interaction between the HTL and GO-g-TPA. As a result of incorporating GO and GO-g-TPA into the HTL matrix, the overall mechanical and thermal properties of the nanocomposites were significantly improved. For the HTL/5 wt% GO-g-TPA nanocomposite, the tensile strength and storage modulus significantly increased by 61% and 224%, respectively. In addition, the melting temperature and crystalline temperature are increased by a notable 20 °C and 21 °C, respectively. Thus, the current study found that by improving the dispersion ability of the GO sheets, the properties of the HTL can be significantly enhanced and the prepared composite materials can be relevant for a wide range of applications including sports goods, hose jackets, wire and cable jackets, electronics, fluid power, sheeting belting seals, and footwear, etc.

Multi-biofunctional graphene oxide-enhanced poly-L-lactic acid composite nanofiber scaffolds for ovarian function recovery of transplanted-tissue

In this study, we successfully constructed the new graphene oxide/poly-L-lactic acid (GO/PLLA) nanofiber scaffolds with a hydrophilic surface and porous network structure that were highly favorable for cell infiltration. When employed these new nanofiber scaffolds for a wide range of tissue engineering applications, it was expected to promote graft tissue survival and angiogenesis. The new GO/PLLA nanofiber scaffold with an appropriate concentration of 1.0 wt% was applied for the restoration of ovarian function and reserve in mice with primary ovarian insufficiency (POI). After co-transplanting the normal ovarian cortex loaded on these new nanomaterials into the in situ ovarian tissue of POI mice, the fusion of transplanted ovarian cortex with damaged ovarian tissue was improved, as well as the ovarian function and the follicle numbers. Moreover, angiogenesis was observed clearly and proved to exist in the transplanted tissue and nanomaterials, with the most conspicuous effect after co-transplantation with 1.0 wt% GO/PLLA nanofiber scaffold. In addition, nitric oxide (NO) production by phosphorylated endothelial nitric oxide synthase (p-eNOS) in vivo was proven to be involved in the effect of GO and PLLA on the improved survival rate of the transplanted ovarian cortex. This study provides a new method for the fertility preservation of ovarian tissue cryopreservation and transplantation, as well as a new strategy for the transplantation of other organs.

Large-Area Ultrastrong and Stiff Layered MXene Nanocomposites by Shear-Flow-Induced Alignment of Nanosheets

To shield increasingly severe radiation pollution, ultrathin MXene-based electromagnetic interference (EMI) shielding materials with excellent mechanical properties are urgently demanded in wearable electrical devices or aerospace fields. However, it is still a challenge to fabricate ultrastrong and stiff MXene-based nanocomposites with excellent EMI shielding capacity in a universal and scalable manner. Here, inspired by the natural nacre structure, we propose an efficient superspreading strategy to construct a highly oriented layered "brick-and-mortar" structure using shear-flow-induced alignment of MXene nanosheets at an immiscible hydrogel/oil interface. A continuous and large-area MXene nanocomposite film has been fabricated through a homemade industrial-scale continuous fabrication setup. The prepared MXene nanocomposite films exhibit a tensile strength of 647.6 ± 56 MPa and a Young's modulus of 59.8 ± 6.1 GPa, respectively. These outstanding mechanical properties are attributed to the continuous interphase layer that formed between the well-aligned MXene nanosheets. Moreover, the obtained MXene nanocomposites also show great EMI shielding effectiveness (51.6 dB). We consider that our MXene-based nanocomposite films may be potentially applied as electrical or aerospace devices with superior mechanical properties and high EMI shielding capacity.