Graphene nanomesh

Possible gapless helical edge states in hydrogenated graphene

Electronic band structures in hydrogenated graphene are theoretically investigated by means of first-principle calculations and an effective tight-binding model. It is shown that regularly designed hydrogenation to graphene gives rise to a large band gap about 1 eV. Remarkably, by changing the spatial pattern of the hydrogenation, topologically distinct states can be realized, where the topological nontriviality is detected by C 2 parity indices in bulk and confirmed by the existence of gapless edge/interface states as protected by the mirror and sublattice symmetries. The analysis of the wave functions reveals that the helical edge states in hydrogenated graphene with the appropriate design carry pseudospin currents that are reminiscent of the quantum spin Hall effect. Our work shows the potential of hydrogenated graphene in pseudospin-based device applications.

Constructing a Comprehensive Nanopattern Library through Morphological Transitions of Block Copolymer Surface Micelles via Direct Solvent Immersion

This study establishes a comprehensive library of nanopatterns achievable by a single block copolymer (BCP), ranging from spheres to complex structures like split micelles, flower-like clusters, toroids, disordered micelle arrays, and unspecified unique shapes. The ordinary nanostructures of polystyrene-b-poly(2-vinylpyridine) (PS-b-P2VP) surface micelles deposited on a SiOx surface undergo a unique morphology transformation when immersed directly in solvents. Investigating parameters such as immersion solvents, BCP molecular weight, substrate interactions, and temperature, this work reveals the influence of these parameters on the thermodynamics and kinetics governing the morphology transformation. Additionally, the practical application of BCP nanopattern templates for fabricating metal nanostructures through direct solvent immersion of surface micelles is demonstrated. This approach offers an efficient and effective method for producing diverse nanostructures, with the potential to be employed in nanolithography, catalysts, electronics, membranes, plasmonics, and photonics.

Emerging Advances around Nanofluidic Transport and Mass Separation under Confinement in Atomically Thin Nanoporous Graphene

Membrane separation stands as an environmentally friendly, high permeance and selectivity, low energy demand process that deserves scientific investigation and industrialization. To address intensive demand, seeking appropriate membrane materials to surpass trade-off between permeability and selectivity and improve stability is on the schedule. 2D materials offer transformational opportunities and a revolutionary platform for researching membrane separation process. Especially, the atomically thin graphene with controllable porosity and structure, as well as unique properties, is widely considered as a candidate for membrane materials aiming to provide extreme stability, exponentially large selectivity combined with high permeability. Currently, it has shown promising opportunities to develop separation membranes to tackle bottlenecks of traditional membranes, and it has been of great interest for tremendously versatile applications such as separation, energy harvesting, and sensing. In this review, starting from transport mechanisms of separation, the material selection bank is narrowed down to nanoporous graphene. The study presents an enlightening overview of very recent developments in the preparation of atomically thin nanoporous graphene and correlates surface properties of such 2D nanoporous materials to their performance in critical separation applications. Finally, challenges related to modulation and manufacturing as well as potential avenues for performance improvements are also pointed out.

Single crystals of purely organic free-standing two-dimensional woven polymer networks

The aesthetic and practicality of macroscopic fabrics continue to encourage chemists to weave molecules into interlaced patterns with the aim of providing emergent physical and chemical properties when compared with their starting materials. Weaving purely organic molecular threads into flawless two-dimensional patterns remains a formidable challenge, even though its feasibility has been proposed on several occasions. Herein we describe the synthesis of a flawless, purely organic, free-standing two-dimensional woven polymer network driven by dative B-N bonds. Single crystals of this woven polymer network were obtained and its well-defined woven topology was revealed by X-ray diffraction analysis. Free-standing two-dimensional monolayer nanosheets of the woven polymer network were exfoliated from the layered crystals using Scotch Magic Tape. The surface features of the nanosheets were investigated by integrated low-dose and cryogenic electron microscopy imaging techniques. These findings demonstrate the precise construction of purely organic woven polymer networks and highlight the unique opportunities for the application of woven topologies in two-dimensional organic materials.

Recent progress in on-surface synthesis of nanoporous graphene materials

Nanoporous graphene (NPG) materials are generated by removing internal degree-3 vertices from graphene and introducing nanopores with specific topological structures, which have been widely explored and exploited for applications in electronic devices, membranes, and energy storage. The inherent properties of NPGs, such as the band structures, field effect mobilities and topological properties, are crucially determined by the geometric structure of nanopores. On-surface synthesis is an emerging strategy to fabricate low-dimensional carbon nanostructures with atomic precision. In this review, we introduce the progress of on-surface synthesis of atomically precise NPGs, and classify NPGs from the aspects of element types, topological structures, pore shapes, and synthesis strategies. We aim to provide a comprehensive overview of the recent advancements, promoting interdisciplinary collaboration to further advance the synthesis and applications of NPGs.

Metal-free platforms for molecular thin films as high-performance supercapacitors

Controlling chemical functionalization and achieving stable electrode-molecule interfaces for high-performance electrochemical energy storage applications remain challenging tasks. Herein, we present a simple, controllable, scalable, and versatile electrochemical modification approach of graphite rods (GRs) extracted from low-cost Eveready cells that were covalently modified with anthracene oligomers. The anthracene oligomers with a total layer thickness of ∼24 nm on the GR electrode yield a remarkable specific capacitance of ∼670 F g-1 with good galvanostatic charge-discharge cycling stability (10 000) recorded in 1 M H2SO4 electrolyte. Such a boost in capacitance is attributed mainly to two contributions: (i) an electrical double-layer at the anthracene oligomer/GR/electrolyte interfaces, and (ii) the proton-coupled electron transfer (PCET) reaction, which ensures a substantial faradaic contribution to the total capacitance. Due to the higher conductivity of the anthracene films, it possesses more azo groups (-N[double bond, length as m-dash]N-) during the electrochemical growth of the oligomer films compared to pyrene and naphthalene oligomers, which is key to PCET reactions. AC-based electrical studies unravel the in-depth charge interfacial electrical behavior of anthracene-grafted electrodes. Asymmetrical solid-state supercapacitor devices were made using anthracene-modified biomass-derived porous carbon, which showed improved performance with a specific capacitance of ∼155 F g-1 at 2 A g-1 with an energy density of 5.8 W h kg-1 at a high-power density of 2010 W kg-1 and powered LED lighting for a longer period. The present work provides a promising metal-free approach in developing organic thin-film hybrid capacitors.

Remarkably high tensile strength and lattice thermal conductivity in wide band gap oxidized holey graphene C2O nanosheet

Recently, the synthesis of oxidized holey graphene with the chemical formula C2O has been reported (J. Am. Chem. Soc. 2024, 146, 4532). We herein employed a combination of density functional theory (DFT) and machine learning interatomic potential (MLIP) calculations to investigate the electronic, optical, mechanical and thermal properties of the C2O monolayer, and compared our findings with those of its C2N counterpart. Our analysis shows that while the C2N monolayer exhibits delocalized π-conjugation and shows a 2.47 eV direct-gap semiconducting behavior, the C2O counterpart exhibits an indirect gap of 3.47 eV. We found that while the C2N monolayer exhibits strong absorption in the visible spectrum, the initial absorption peaks in the C2O lattice occur at around 5 eV, falling within the UV spectrum. Notably, we found that the C2O nanosheet presents significantly higher tensile strength compared to its C2N counterpart. MLIP-based calculations show that at room temperature, the C2O nanosheet can exhibit remarkably high tensile strength and lattice thermal conductivity of 42 GPa and 129 W/mK, respectively. The combined insights from DFT and MLIP-based results provide a comprehensive understanding of the electronic and optical properties of C2O nanosheets, suggesting them as mechanically robust and highly thermally conductive wide bandgap semiconductors.

Generation of attosecond gigawatt soft x-ray pulses through coherent Thomson backscattering

Collision between relativistic electron sheets and counterpropagating laser pulses is recognized as a promising way to produce intense attosecond x rays through coherent Thomson backscattering (TBS). In a double-layer scheme, the electrons in an ultrathin solid foil are first pushed out by an intense laser driver and then interact with the laser reflected off a second foil to form a high-density relativistic electron sheet with vanishing transverse momentum. However, the repulsion between these concentrated electrons can increase the thickness of the layer, reducing both its density and subsequently the coherent TBS. Here, we present a systematic study on the evolution of the flying electron layer and find that its resulting thickness is determined by the interplay between the intrinsic space-charge expansion and the velocity compression induced by the drive laser. How the laser driver, the target areal density, the reflector, and the collision laser intensity affect the properties of the produced x rays is explored. Multidimensional particle-in-cell simulations indicate that employing this scheme in the nonlinear regime has the potential to stably produce soft x rays with several gigawatt peak power in hundreds of terawatt ultrafast laser facilities. The pulse duration can be tuned to tens of attoseconds. This compact and intense attosecond x-ray source may have broad applications in attosecond science.

Porous Nanographenes, Graphene Nanoribbons, and Nanoporous Graphene Selectively Synthesized from the Same Molecular Precursor

We demonstrate a family of molecular precursors based on 7,10-dibromo-triphenylenes that can selectively produce different varieties of atomically precise porous graphene nanomaterials through the use of different synthetic environments. Upon Yamamoto polymerization of these molecules in solution, the free rotations of the triphenylene units around the C-C bonds result in the formation of cyclotrimers in high yields. In contrast, in on-surface polymerization of the same molecules on Au(111) these rotations are impeded, and the coupling proceeds toward the formation of long polymer chains. These chains can then be converted to porous graphene nanoribbons (pGNRs) by annealing. Correspondingly, the solution-synthesized cyclotrimers can also be deposited onto Au(111) and converted into porous nanographenes (pNGs) via thermal treatment. Thus, both processes start with the same molecular precursor and end with a porous graphene nanomaterial on Au(111), but the type of product, pNG or pGNR, depends on the specific coupling approach. We also produced extended nanoporous graphenes (NPGs) through the lateral fusion of highly aligned pGNRs on Au(111) that were grown at high coverage. The pNGs can also be synthesized directly in solution by Scholl oxidative cyclodehydrogenation of cyclotrimers. We demonstrate the generality of this approach by synthesizing two varieties of 7,10-dibromo-triphenylenes that selectively produced six nanoporous products with different dimensionalities. The basic 7,10-dibromo-triphenylene monomer is amenable to structural modifications, potentially providing access to many new porous graphene nanomaterials. We show that by constructing different porous structures from the same building blocks, it is possible to tune the energy band gap in a wide range.

Controllable defects in monolayer graphene induced by hydrogen and argon plasma

Graphene has attracted wide attentions since its successfully exfoliation. Honeycombsp2carbon lattice and Dirac semi-metal band structure make graphene a promising material with excellent mechanical strength, thermal conductivity, and carrier mobility. However, the absence of intrinsic bandgap limits its application in semiconductor. Defects in graphene is supposed to modify its band structure and lead to an opened bandgap. Many methods have been demonstrated to introduce defects into graphene, such as chemical reaction, plasma, electron beam, and laser. However, the species of defects are mostly uncontrollable in most treatment processes. In this study, we report three kinds of defects can be controllably induced in graphene via hydrogen (H2) and argon (Ar) plasma. With different parameter and feeding gas, hydrogenated graphene, graphene nanomesh and graphene with vacancies can be well obtained. The defect density can be precisely controlled by tuning plasma power and irradiation time. Morphological, spectroscopic, and electrical characterizations are performed to systematically investigate the defect evolution. Graphene nanomesh and graphene with vacancies show obvious difference for roughness and coverage, whereas the morphology of hydrogenated graphene remains similar with that of as-prepared graphene. For hydrogenated graphene, an opened bandgap of ∼20 meV is detected. For graphene nanomesh and graphene with vacancies, the semiconductive on/off behaviors are observed. We believe this work can provide more details of plasma-induced defects and assist the application of graphene in semiconductor industry.

Layer-by-layer thinning of two-dimensional materials

Etching technology - one of the representative modern semiconductor device makers - serves as a broad descriptor for the process of removing material from the surfaces of various materials, whether partially or entirely. Meanwhile, thinning technology represents a novel and highly specialized approach within the realm of etching technology. It indicates the importance of achieving an exceptionally sophisticated and precise removal of material, layer-by-layer, at the nanoscale. Notably, thinning technology has gained substantial momentum, particularly in top-down strategies aimed at pushing the frontiers of nano-worlds. This rapid development in thinning technology has generated substantial interest among researchers from diverse backgrounds, including those in the fields of chemistry, physics, and engineering. Precisely and expertly controlling the layer numbers of 2D materials through the thinning procedure has been considered as a crucial step. This is because the thinning processes lead to variations in the electrical and optical characteristics. In this comprehensive review, the strategies for top-down thinning of representative 2D materials (e.g., graphene, black phosphorus, MoS2, h-BN, WS2, MoSe2, and WSe2) based on conventional plasma-assisted thinning, integrated cyclic plasma-assisted thinning, laser-assisted thinning, metal-assisted splitting, and layer-resolved splitting are covered in detail, along with their mechanisms and benefits. Additionally, this review further explores the latest advancements in terms of the potential advantages of semiconductor devices achieved by top-down 2D material thinning procedures.

Bottom-Up Synthesis of Twisted Porous Graphene through a Heterogeneous Scholl Reaction and Its Supercapacitor Application

Anthracene- and pyrene-based twisted porous graphene (AN-Pyre-PG) with an ordered pore structure has been synthesized through bottom-up solution phase synthesis from a conjugated microporous polymer (AN-Pyre-CMP) via a heterogeneous Scholl cyclization reaction. The regular-ordered pores embedded within the graphene structures were analyzed through a Raman spectrum, different morphological analyses, and theoretical studies. A significant change in surface area from AN-Pyre-CMP to AN-Pyre-PG was observed, from 143 to 640 m2/g, respectively. Surface area-driven capacitive properties were also observed. Twisted-structure and ordered porous graphene shows better specific capacitance compared to CMP. AN-Pyre-PG shows a specific capacitance of 629 F g-1 at 1 A g-1, with 91% retention of capacitance after 3000 charge-discharge cycles, whereas AN-Pyre-CMP shows a maximum specific capacitance of 200 F g-1 was observed at 2 A g-1.

Machine Learning Aided Design and Optimization of Thermal Metamaterials

Artificial Intelligence (AI) has advanced material research that were previously intractable, for example, the machine learning (ML) has been able to predict some unprecedented thermal properties. In this review, we first elucidate the methodologies underpinning discriminative and generative models, as well as the paradigm of optimization approaches. Then, we present a series of case studies showcasing the application of machine learning in thermal metamaterial design. Finally, we give a brief discussion on the challenges and opportunities in this fast developing field. In particular, this review provides: (1) Optimization of thermal metamaterials using optimization algorithms to achieve specific target properties. (2) Integration of discriminative models with optimization algorithms to enhance computational efficiency. (3) Generative models for the structural design and optimization of thermal metamaterials.

Flat bands without twists: periodic holey graphene

Holey Graphene(HG) is a widely used graphene material for the synthesis of high-purity and highly crystalline materials. The electronic properties of a periodic distribution of lattice holes are explored here, demonstrating the emergence of flat bands. It is established that such flat bands arise as a consequence of an induced sublattice site imbalance, i.e. by having more sites in one of the graphene's bipartite sublattice than in the other. This is equivalent to the breaking of a path-exchange symmetry. By further breaking the inversion symmetry, gaps and a nonzero Berry curvature are induced, leading to topological bands. In particular, the folding of the Dirac cones from the hexagonal Brillouin zone (BZ) to the holey superlattice rectangular BZ of HG, with sizes proportional to an integerntimes the graphene's lattice parameter, leads to a periodicity in the gap formation such thatn≡0(mod 3). A low-energy hamiltonian for the three central bands is also obtained revealing that the system behaves as an effectiveα-T3graphene material. Therefore, a simple protocol is presented here that allows for obtaining flat bands at will. Such bands are known to increase electron-electron correlation effects. Therefore, the present work provides an alternative system that is much easier to build than twisted systems, allowing for the production of flat bands and potentially highly correlated quantum phases.

Combining linear-scaling quantum transport and machine-learning molecular dynamics to study thermal and electronic transports in complex materials

We propose an efficient approach for simultaneous prediction of thermal and electronic transport properties in complex materials. Firstly, a highly efficient machine-learned neuroevolution potential (NEP) is trained using reference data from quantum-mechanical density-functional theory calculations. This trained potential is then applied in large-scale molecular dynamics simulations, enabling the generation of realistic structures and accurate characterization of thermal transport properties. In addition, molecular dynamics simulations of atoms and linear-scaling quantum transport calculations of electrons are coupled to account for the electron-phonon scattering and other disorders that affect the charge carriers governing the electronic transport properties. We demonstrate the usefulness of this unified approach by studying electronic transport in pristine graphene and thermoelectric transport properties of a graphene antidot lattice, with a general-purpose NEP developed for carbon systems based on an extensive dataset.

Laser Engineering Nanocarbon Phases within Diamond for Science and Electronics

Diamond, as the densest allotrope of carbon, displays a range of exemplary material properties that are attractive from a device perspective. Despite diamond displaying high carbon-carbon bond strength, ultrashort (femtosecond) pulse laser radiation can provide sufficient energy for highly localized internal breakdown of the diamond lattice. The less-dense carbon structures generated on lattice breakdown are subject to significant pressure from the surrounding diamond matrix, leading to highly unusual formation conditions. By tailoring the laser dose delivered to the diamond, it is shown that it is possible to create continuously modified internal tracks with varying electrical conduction properties. In addition to the widely reported conducting tracks, conditions leading to semiconducting and insulating written tracks have been identified. High-resolution transmission electron microscopy (HRTEM) is used to visualize the structural transformations taking place and provide insight into the different conduction regimes. The HRTEM reveals a highly diverse range of nanocarbon structures are generated by the laser irradiation, including many signatures for different so-called diaphite complexes, which have been seen in meteorite samples and seem to mediate the laser-induced breakdown of the diamond. This work offers insight into possible formation methods for the diamond and related nanocarbon phases found in meteorites.

Energy Application of Graphene Based Membrane: Hydrogen Separation

Hydrogen gas (H2 ) is a viable energy carrier that has the potential to replace the traditional fossil fuels and contribute to achieving zero net emissions, making it an attractive option for a hydrogen-based society. However, current H2 purification technologies are often limited by high energy consumption, and as a result, there is a growing demand for alternative techniques that offer higher H2 purity and energy efficiency. Membrane separation has emerged as a promising approach for obtaining high-purity H2 gas with low energy consumption. Nevertheless, despite years of development, commercial polymeric membranes have limited performance, prompting researchers to explore alternative materials. In this context, carbon-based membranes, specifically graphene-based nanomaterials, have gained significant attention as potential membrane materials due to their unique properties. In this review, we provide a comprehensive overview of carbon-based membranes for H2 gas separation, fabrication of the membrane, and its characterization, including their advantages and limitations. We also explore the current technological challenges and suggest insights into future research directions, highlighting potential ways to improve graphene-based membranes performance for H2 separations.

Cascaded compression of size distribution of nanopores in monolayer graphene

Monolayer graphene with nanometre-scale pores, atomically thin thickness and remarkable mechanical properties provides wide-ranging opportunities for applications in ion and molecular separations1, energy storage2 and electronics3. Because the performance of these applications relies heavily on the size of the nanopores, it is desirable to design and engineer with precision a suitable nanopore size with narrow size distributions. However, conventional top-down processes often yield log-normal distributions with long tails, particularly at the sub-nanometre scale4. Moreover, the size distribution and density of the nanopores are often intrinsically intercorrelated, leading to a trade-off between the two that substantially limits their applications5-9. Here we report a cascaded compression approach to narrowing the size distribution of nanopores with left skewness and ultrasmall tail deviation, while keeping the density of nanopores increasing at each compression cycle. The formation of nanopores is split into many small steps, in each of which the size distribution of all the existing nanopores is compressed by a combination of shrinkage and expansion and, at the same time as expansion, a new batch of nanopores is created, leading to increased nanopore density by each cycle. As a result, high-density nanopores in monolayer graphene with a left-skewed, short-tail size distribution are obtained that show ultrafast and ångström-size-tunable selective transport of ions and molecules, breaking the limitation of the conventional log-normal size distribution9,10. This method allows for independent control of several metrics of the generated nanopores, including the density, mean diameter, standard deviation and skewness of the size distribution, which will lead to the next leap in nanotechnology.

Near-Field Photodetection in Direction Tunable Surface Plasmon Polaritons Waveguides Embedded with Graphene

2D materials have manifested themselves as key components toward compact integrated circuits. Because of their capability to circumvent the diffraction limit, light manipulation using surface plasmon polaritons (SPPs) is highly-valued. In this study, plasmonic photodetection using graphene as a 2D material is investigated. Non-scattering near-field detection of SPPs is implemented via monolayer graphene stacked under an SPP waveguide with a symmetric antenna. Energy conversion between radiation power and electrical signals is utilized for the photovoltaic and photoconductive processes of the gold-graphene interface and biased electrodes, measuring a maximum photoresponsivity of 29.2 mA W-1 . The generated photocurrent is altered under the polarization state of the input light, producing a 400% contrast between the maximum and minimum signals. This result is universally applicable to all on-chip optoelectronic circuits.

On-Surface Synthesis of Graphene Nanoribbons with Atomically Precise Structural Heterogeneities and On-Site Characterizations

Graphene nanoribbons (GNRs) are strips of graphene, with widths of a few nanometers, that are promising candidates for future applications in nanodevices and quantum information processing due to their highly tunable structure-dependent electronic, spintronic, topological, and optical properties. Implantation of periodic structural heterogeneities, such as heteroatoms, nanopores, and non-hexagonal rings, has become a powerful manner for tailoring the designer properties of GNRs. The bottom-up synthesis approach, by combining on-surface chemical reactions based on rationally designed molecular precursors and in situ tip-based microscopic and spectroscopic techniques, promotes the construction of atomically precise GNRs with periodic structural modulations. However, there are still obstacles and challenges lying on the way toward the understanding of the intrinsic structure-property relations, such as the strong screening and Fermi level pinning effect of the normally used transition metal substrates and the lack of collective tip-based techniques that can cover multi-internal degrees of freedom of the GNRs. In this Perspective, we briefly review the recent progress in the on-surface synthesis of GNRs with diverse structural heterogeneities and highlight the structure-property relations as characterized by the noncontact atomic force microscopy and scanning tunneling microscopy/spectroscopy. We furthermore motivate to deliver the need for developing strategies to achieve quasi-freestanding GNRs and for exploiting multifunctional tip-based techniques to collectively probe the intrinsic properties.

Bottom-up Solution Synthesis of Graphene Nanoribbons with Precisely Engineered Nanopores

The incorporation of nanopores into graphene nanostructures has been demonstrated as an efficient tool in tuning their band gaps and electronic structures. However, precisely embedding the uniform nanopores into graphene nanoribbons (GNRs) at the atomic level remains underdeveloped especially for in-solution synthesis due to the lack of efficient synthetic strategies. Herein we report the first case of solution-synthesized porous GNR (pGNR) with a fully conjugated backbone via the efficient Scholl reaction of tailor-made polyphenylene precursor (P1) bearing pre-installed hexagonal nanopores. The resultant pGNR features periodic subnanometer pores with a uniform diameter of 0.6 nm and an adjacent-pores-distance of 1.7 nm. To solidify our design strategy, two porous model compounds (1 a, 1 b) containing the same pore size as the shortcuts of pGNR, are successfully synthesized. The chemical structure and photophysical properties of pGNR are investigated by various spectroscopic analyses. Notably, the embedded periodic nanopores largely reduce the π-conjugation degree and alleviate the inter-ribbon π-π interactions, compared to the nonporous GNRs with similar widths, affording pGNR with a notably enlarged band gap and enhanced liquid-phase processability.

In-Plane Porous Graphene: A Promising Anode Material with High Ion Mobility and Energy Storage for Rubidium-Ion Batteries

Rubidium-ion batteries (RIBs) have received a lot of attention in the quantum field because of their fast release and reversible advantages as alkali sources. However, the anode material of RIBs still follows graphite, whose layer spacing can greatly restrict the diffusion and storage capability of Rb-ions, posing a significant barrier to RIB development. Herein, using first-principles calculations, the potential performance of three kinds of in-plane porous graphene with pore sizes of 5.88 Å (HG588), 10.39 Å (HG1039), and 14.20 Å (HG1420) as anode materials for RIBs was explored. The results indicate that HG1039 appears to be an appropriate anode material for RIBs. HG1039 has excellent thermodynamic stability and a volume expansion of <25% during charge and discharge. The theoretical capacity of HG1039 is up to 1810 mA h g^-1, which is ∼5 times higher than that of the existing graphite-based lithium-ion batteries. Importantly, not only HG1039 enables the diffusion of Rb-ions at the three-dimensional level but also the electrode-electrolyte interface formed by HG1039 and Rb-β-Al₂O₃ facilitates the arrangement and transfer of Rb-ions. In addition, HG1039 is metallic, and its outstanding ionic conductivity (diffusion energy barrier of only 0.04 eV) and electronic conductivity indicates superior rate capability. These characteristics make HG1039 an appealing anode material for RIBs.

Ion transport in two-dimensional flexible nanoporous membranes

Ion transport is a fundamental mechanism in living systems that plays a role in cell proliferation, energy conversion, and maintaining homeostasis. This has inspired various nanofluidic applications such as electricity harvesting, molecular sensors, and molecular separation. Two dimensional (2D) nanoporous membranes are particularly promising for these applications due to their ultralow transport barriers. We investigated ion conduction across flexible 2D membranes via extensive molecular dynamics simulations. We found that the microscopic fluctuations of these membranes can significantly increase ion conductance, for example, by 320% in Cu-HAB with 0.5 M KCl. Our analysis of ion dynamics near the flexible membranes revealed that ion hydration is destabilized when the membrane fluctuated within a specific frequency range leading to improved ion conduction. Our results show that the dynamic coupling between the fluctuating membrane and ions can play a crucial role in ion conduction across 2D nanoporous membranes.

Graphene Strain-Effect Transistor with Colossal ON/OFF Current Ratio Enabled by Reversible Nanocrack Formation in Metal Electrodes on Piezoelectric Substrates

Extraordinarily high carrier mobility in graphene has led to many remarkable discoveries in physics and at the same time invoked great interest in graphene-based electronic devices and sensors. However, the poor ON/OFF current ratio observed in graphene field-effect transistors has stymied its use in many applications. Here, we introduce a graphene strain-effect transistor (GSET) with a colossal ON/OFF current ratio in excess of 10⁷ by exploiting strain-induced reversible nanocrack formation in the source/drain metal contacts with the help of a piezoelectric gate stack. GSETs also exhibit steep switching with a subthreshold swing (SS) < 1 mV/decade averaged over ∼6 orders of magnitude change in the source-to-drain current for both electron and hole branch amidst a finite hysteresis window. We also demonstrate high device yield and strain endurance for GSETs. We believe that GSETs can significantly expand the application space for graphene-based technologies beyond what is currently envisioned.

Batch Production of High-Quality Graphene Grids for Cryo-EM: Cryo-EM Structure of Methylococcus capsulatus Soluble Methane Monooxygenase Hydroxylase

Cryogenic electron microscopy (cryo-EM) has become a widely used tool for determining the protein structure. Despite recent technical advances, sample preparation remains a major bottleneck for several reasons, including protein denaturation at the air-water interface, the presence of preferred orientations, nonuniform ice layers, etc. Graphene, a two-dimensional allotrope of carbon consisting of a single atomic layer, has recently gained attention as a near-ideal support film for cryo-EM that can overcome these challenges because of its superior properties, including mechanical strength and electrical conductivity. Here, we introduce a reliable, easily implemented, and reproducible method to produce 36 graphene-coated grids within 1.5 days. To demonstrate their practical application, we determined the cryo-EM structure of Methylococcus capsulatus soluble methane monooxygenase hydroxylase (sMMOH) at resolutions of 2.9 and 2.5 Å using Quantifoil and graphene-coated grids, respectively. We found that the graphene-coated grid has several advantages, including a smaller amount of protein required and avoiding protein denaturation at the air-water interface. By comparing the cryo-EM structure of sMMOH with its crystal structure, we identified subtle yet significant geometrical changes at the nonheme diiron center, which may better indicate the active site configuration of sMMOH in the resting/oxidized state.

Graphene-Related Nanomaterials for Biomedical Applications

This paper builds on the context and recent progress on the control, reproducibility, and limitations of using graphene and graphene-related materials (GRMs) in biomedical applications. The review describes the human hazard assessment of GRMs in in vitro and in vivo studies, highlights the composition-structure-activity relationships that cause toxicity for these substances, and identifies the key parameters that determine the activation of their biological effects. GRMs are designed to offer the advantage of facilitating unique biomedical applications that impact different techniques in medicine, especially in neuroscience. Due to the increasing utilization of GRMs, there is a need to comprehensively assess the potential impact of these materials on human health. Various outcomes associated with GRMs, including biocompatibility, biodegradability, beneficial effects on cell proliferation, differentiation rates, apoptosis, necrosis, autophagy, oxidative stress, physical destruction, DNA damage, and inflammatory responses, have led to an increasing interest in these regenerative nanostructured materials. Considering the existence of graphene-related nanomaterials with different physicochemical properties, the materials are expected to exhibit unique modes of interactions with biomolecules, cells, and tissues depending on their size, chemical composition, and hydrophil-to-hydrophobe ratio. Understanding such interactions is crucial from two perspectives, namely, from the perspectives of their toxicity and biological uses. The main aim of this study is to assess and tune the diverse properties that must be considered when planning biomedical applications. These properties include flexibility, transparency, surface chemistry (hydrophil-hydrophobe ratio), thermoelectrical conductibility, loading and release capacity, and biocompatibility.

Nanostructured Material and its Application in Membrane Separation Technology

Abstract:

Nanomaterials are classified with their at least one dimension in the range of 1-100 nm, which offers new innovative solutions for membrane development. These are included as nanosized adsorbents, nanomembranes, nanocomposites, photocatalysts, nanotubes, nanoclays, etc. Nanomaterials are promising, exceptional properties for one of the opportunity is to prevent the global water crisis with their extraordinary performance as their usage for membrane development, particularly for water treatment process. Nanomaterial based membranes that include nanoparticles, nanofibers, 2D layered materials, and their nanostructured composites which provide superior permeation characteristics besides their antifouling, antibacterial and photodegradation properties. They are enable for providing the extraordinary properties to be used as ultrafast and ultimately selective membranes for water purification. In this review, recently developed nanomaterial based membranes and their applications for water treatment process were summarized. The main attention is given to the nanomaterial based membrane structure design. The variety in terms of constituent structure and alterations provide nanomaterial based membranes which will be expected to be a perfect separation membrane in the future.

Silica sand-supported nano zinc oxide-graphene oxide composite induced rapid photocatalytic decolorization of azo dyes under sunlight and improved antimicrobial activity

Here, silica sand-supported heterojunction composite of nano zinc oxide (nZnO) and graphene oxide nanosheet (nZnO-GO@SS) was prepared, and its potential as an efficient photocatalyst for the degradation of methylene blue (MB) and Rhodamine-B (Rh-B) under sunlight was demonstrated. Transmission electron microscopy confirmed the uniform distribution of spherically shaped nZnO of average size of approximately 8 nm over graphene oxide nanosheet (GO) in the composites. Photodegradation yields of 95.3% and 97.5% for 100 ppm of MB and Rh-B dye within 150 and 220 min, respectively, were achieved under sunlight by the prepared nanocatalyst (nZnO-GO), while sand microparticle-supported nanocatalyst (nZnO-GO@SS) demonstrated faster degradation of MB and Rh-B, i.e., within 120 and 160 min, respectively. Furthermore, when the recyclability of the photocatalyst was studied, the nZnO-GO exhibited more than 80% degradation efficiency after five cycles for both the dyes and nZnO-GO@SS demonstrated 10% higher (~90%) removal capability after five cycles of reuse. Furthermore, the antibacterial assay showed complete inactivation of Escherichia coli and Staphylococcus aureus bacterial strain by nZnO-GO@SS. Hence, our proposed strategy for the removal of toxic dyes from the aquatic environment under sunlight proved that sand microparticle-supported nanocatalyst (nZnO-GO@SS) might be a superior, cost-effective, and suitable photocatalytic system for industrial applications toward toxic dye removal and decontamination from industrial wastewater.

Graphene nano-sieves by femtosecond laser irradiation

The formation of nano-pores in graphene crystal structure is alternative way to engineer its electronic properties, chemical reactivity, and surface interactions, enabling applications in technological fields such as sensing, energy and separation. The past few years, nano-perforation of graphene sheets has been accomplished by a variety of different methods suffering mainly from poor scalability and cost efficiency issues. In this work, we introduce an experimental protocol to engineer nanometer scale pores in CVD graphene membranes under ambient conditions, using low power ultra-short laser pulses and overcoming the drawbacks of other perforation techniques. Using Atomic Force Microscopy (AFM) and Scanning Electron Microscopy (SEM) we visualized and quantified the nanopore network while Raman spectroscopy is utilized to correlate the nano-perforated area with the nanotopographic imaging. We suggest that Raman imaging provides the identification of nanoporous area and, in combination with AFM, we provide solid evidence for the reproducibility of the method, since under these experimental conditions, nanopores of a certain size distribution are formed.

Production of Large-Area Nucleus-Free Single-Crystal Graphene-Mesh Metamaterials with Zigzag Edges

In addition to conventional monolayer or bilayer graphene films, graphene-mesh metamaterials have attracted considerable research attention within the scientific community owing to their unique physical and optical properties. Currently, most graphene-mesh metamaterials are fabricated using common lithography techniques on exfoliated graphene flakes, which require the deposition and removal of chemicals during fabrication. This process may introduce contamination or doping, thereby limiting their production size and application in nanodevices. Herein, the controlled production of wafer-scale high-quality single-crystal nucleus-free graphene-mesh metamaterial films with zigzag edges is demonstrated. The ¹³ C-isotopic labeling graphene-growth approach, large-area Raman mapping techniques, and a uniquely designed high-voltage localized-space air-ionization etching method are utilized to directly remove the graphene nuclei. Subsequently, a hydrogen-assisted anisotropic etching process is employed for transforming irregular edges into zigzag edges within the hexagonal-shaped holes, producing a large-scale single-crystal high-quality graphene-mesh metamaterial film on a Cu(111) substrate. The carrier mobilities of the fabricated field-effect transistors on the as-produced films are measured. The findings of this study enable the large-scale production of high-quality low-dimensional graphene-mesh metamaterials and provide insights for the application of integrated circuits based on graphene and other 2D metamaterials.

Recent Advances in Responsive Membrane Functionalization Approaches and Applications

In recent years, significant advances have been made in the field of functionalized membranes. With the functionalization using various materials, such as polymers and enzymes, membranes can exhibit property changes in response to an environmental stimulation, such as heat, light, ionic strength, or pH. The resulting responsive nature allows for an increased breadth of membrane uses, due to the developed functionalization properties, such as smart-gating filtration for size-selective water contaminant removal, self-cleaning antifouling surfaces, increased scalability options, and highly sensitive molecular detection. In this review, new advances in both fabrication and applications of functionalized membranes are reported and summarized, including temperature-responsive, pH-responsive, light-responsive, enzyme-functionalized, and two-dimensional material-functionalized membranes. Specific emphasis was given to the most recent technological improvements, current limitations, advances in characterization techniques, and future directions for the field of functionalized membranes.

Synthesis of graphene nanomesh with symmetrical fractal patterns via hydrogen-free chemical vapor deposition

Graphene nanomesh (GNM), an emerging graphene nanostructure with a tunable bandgap, has gained tremendous interests owing to its great potentials in the fields of high-performance field-effect transistors, electrochemical sensors, new generation of spintronics and energy converters. In previous works, GNM has been successfully obtained on copper foil surface by employing hydrogen as an etching agent. A more facile, and low-cost strategy for the preparation of GNM is required. Here, we demonstrated a direct and feasible means for synthesizing large-area GNM with symmetrical fractal patterns via a hydrogen-free chemical vapor deposition method. The influences of the growth time and the gas source flow on the morphology of GNM patterns were systematically investigated. Then, we exhibited the key reaction details and proposed a growth mechanism of the GNM synthesis during the hydrogen-free chemical vapor deposition process. This work provides a valuable guidance for quality control in GNM mass production.

N-doped graphene for electrocatalytic O2 and CO2 reduction

The electrocatalytic CO₂ reduction reaction (CO₂RR) and oxygen reduction reaction (ORR) are important approaches to realize energy conversion and sustainable development. However, sluggish reaction kinetics severely hinders the practical application of devices related to these reactions. N-doped graphene (NG) with unique properties exhibits great potential in catalyzing the CO₂RR and ORR, which is attributed to the electron redistribution. In this review, we start from the fundamental properties of NG, especially emphasizing the changes caused by N doping. Then the synthetic methods are summarized by classifying them into top-down strategies and bottom-up strategies. Subsequently, the applications of NG in the ORR and CO₂RR are discussed and the effects of electronic structure on the electrocatalytic activity are highlighted. Finally, we give our own perspective on the future research direction of NG in the applications of the ORR and CO₂RR.

Symmetry and spacing controls in periodic covalent functionalization of graphite surfaces templated by self-assembled molecular networks

We herein present the periodic covalent functionalization of graphite surfaces, creating a range of patterns of different symmetries and pitches at the nanoscale. Self-assembled molecular networks (SAMNs) of rhombic-shaped bis(dehydrobenzo[12]annulene) (bisDBA) derivatives having alkyl chain substituents of different lengths were used as templates for covalent grafting of electrochemically generated aryl radicals. Scanning tunneling microscopy (STM) observations at the 1,2,4-trichlorobenzene/graphite interface revealed that these molecules form a variety of networks that contain pores of different shapes and sizes. The covalently functionalized surfaces show hexagonal, oblique, and quasi-rectangular periodicities. This is attributed to the favorable aryl radical addition at the pore(s). We also confirmed the successful transmission of chirality information from the SAMNs to the alignment of the grafted aryls. In one case, the addition of a guest molecule was used to switch the SAMN symmetry and periodicity, leading to a change in the functionalized surface periodicity from oblique to hexagonal in the presence of the guest molecule. This contribution highlights the potential of SAMNs as templates for the controlled formation of nanopatterned carbon materials.

Tunable Optimal Dual Band Metamaterial Absorber for High Sensitivity THz Refractive Index Sensing

We present a simple dual band absorber design and investigate it in the terahertz (THz) region. The proposed absorber works in dual operating bands at 5.1 THz and 11.7 THz. By adjusting the graphene chemical potential, the proposed absorber has the controllability of the resonance frequency to have perfect absorption at various frequencies. The graphene surface plasmon resonance results in sharp and narrow resonance absorption peaks. For incident angles up to 8°, the structure possesses near-unity absorption. The proposed sensor absorber's functionality is evaluated using sensing medium with various refractive indices. The proposed sensor is simulated for glucose detection and a maximum sensitivity of 4.72 THz/RIU is observed. It has a maximum figure of merit (FOM) and Quality factor (Q) value of 14 and 32.49, respectively. The proposed optimal absorber can be used to identify malaria virus and cancer cells in blood. Hence, the proposed plasmonic sensor is a serious contender for biomedical uses in the diagnosis of bacterial infections, cancer, malaria, and other diseases.

Step-Assisted On-Surface Synthesis of Graphene Nanoribbons Embedded with Periodic Divacancies

The bottom-up approach through on-surface synthesis of porous graphene nanoribbons (GNRs) presents a controllable manner for implanting periodic nanostructures to tune the electronic properties of GNRs in addition to bandgap engineering by width and edge configurations. However, owing to the existing steric hindrance in small pores like divacancies, it is still difficult to embed periodic divacancies with a nonplanar configuration into GNRs. Here, we demonstrate the on-surface synthesis of atomically precise eight-carbon-wide armchair GNRs embedded with periodic divacancies (DV8-aGNRs) by utilizing the monatomic step edges on the Au(111) surface. From a single molecular precursor correspondingly following a trans- and cis-coupling, the DV8-aGNR and another porous nanographene are respectively formed at step edges and on terraces at 720 and 570 K. Combining scanning tunneling microscopy/spectroscopy, atomic force microscopy, and first-principles calculations, we determine the out-of-plane conformation, wide bandgap (∼3.36 eV), and wiggly shaped frontier orbitals of the DV8-aGNR. Nudged elastic band calculations further quantitatively reveal that the additional steric hindrance effect in the cyclodehydrogenative reactions has a higher barrier of 1.3 eV than that in the planar porous nanographene, which also unveils the important role played by the monatomic Au step and adatoms in reducing the energy barriers and enhancing the thermodynamic preference of the oxidative cyclodehydrogenation. Our results provide the first case of GNRs containing periodic pores as small as divacancies with a nonplanar configuration and demonstrate the strategy by utilizing the chemical heterogeneity of a substrate to promote the formation of novel carbon nanomaterials.

Gas Separations using Nanoporous Atomically Thin Membranes: Recent Theoretical, Simulation, and Experimental Advances

Porous graphene and other atomically thin 2D materials are regarded as highly promising membrane materials for high-performance gas separations due to their atomic thickness, large-scale synthesizability, excellent mechanical strength, and chemical stability. When these atomically thin materials contain a high areal density of gas-sieving nanoscale pores, they can exhibit both high gas permeances and high selectivities, which is beneficial for reducing the cost of gas-separation processes. Here, recent modeling and experimental advances in nanoporous atomically thin membranes for gas separations is discussed. The major challenges involved, including controlling pore size distributions, scaling up the membrane area, and matching theory with experimental results, are also highlighted. Finally, important future directions are proposed for real gas-separation applications of nanoporous atomically thin membranes.

Thermal transport in porous graphene with coupling effect of nanopore shape and defect concentration

Thermal conductivity of porous graphene can be affected by defect concentration, nanopore shape and distribution, and it is hard to clarify the effects due to the correlation of those factors. In this work, molecular dynamics simulation is used to compare the thermal conductivity of graphene with three shapes of regularly arranged nanopores. The results prove the dominant role of defect concentration under certain circumstances in reducing thermal conductivity, while the coupling effect of nanopore shape should be noticed. When the atoms at the local phonon scattering area around each nanopore are properly removed, the abnormal increment of thermal conductivity can be detected with the increase of defect concentration. Heat flux vector angles can effectively characterize the local phonon scattering area, which can be used to describe the effect of nanopore shape. The coupling effect of defect concentration and pore shape with similar heat flux path is clarified according to this process. By adjusting vertex angle of triangle defect, there is a balanced state of the effect factors between the variation of defect concentration and the same phonon scattering area. It provides a possible way to describe the weighing factors of the coupling effect. The results suggest a feasible approach to optimize and regulate thermal properties of porous graphene in nanodevice.

Electrically-driven robust tuning of lattice thermal conductivity

The two-dimensional (2D) materials, represented by graphene, stand out in the electrical industry applications of the future and have been widely studied. As commonly existing in electronic devices, the electric field has been extensively utilized to modulate the performance. However, how the electric field regulates thermal transport is rarely studied. Herein, we investigate the modulation of thermal transport properties by applying an external electric field ranging from 0 to 0.4 V Å^-1, with bilayer graphene, monolayer silicene, and germanene as study cases. The monotonically decreasing trend of thermal conductivity in all three materials is revealed. A significant effect on the scattering rate is found to be responsible for the decreased thermal conductivity driven by the electric field. Further evidence shows that the reconstruction of internal electric field and generation of induced charges lead to increased scattering rate from strong phonon anharmonicity. Thus, the ultralow thermal conductivity emerges with the application of external electric fields. Applying an external electric field to regulate thermal conductivity illustrates a constructive idea for highly efficient thermal management.

Thermoelectric transport properties of armchair graphene nanoribbon heterostructures

In this paper, we numerically analyze the thermoelectric (TE) properties of recently synthesized graphene nanoribbon (GNR) heterostructures that are obtained as extensions of pristine armchair graphene nanoribbons (AGNRs). After simulating their band structure through a nearest-neighbor tight-binding model, we use the Landauer formalism to calculate the necessary TE coefficients, with which we obtain the electrical conductanceG, thermopowerS, thermal conductanceK_e, linear-response thermocurrentIth/ΔT=GS, and figure of meritZT(using literature results for the phonon thermal conductanceK_ph), at room temperature. We then compare the results for the nanoribbon heterostructures with those for the pristine AGNR nanoribbons. The comparison shows that the metallic AGNRs become semiconducting (with much higherZTvalues) after the inclusion of the extensions that transform them into heterostructures and that some heterostructures have higher values ofZTwhen compared to the semiconducting pristine AGNRs from which they have originated.

Effects of Tearing Conditions on the Crack Propagation in a Monolayer Graphene Sheet

The path of crack propagation in a graphene sheet is significant for graphene patterning via the tearing approach. In this study, we evaluate the fracture properties of pre-cracked graphene during the tearing process, with consideration of the effects of the aspect ratio, loading speed, loading direction, and ambient temperatures on the crack propagation in the monolayer sheet. Some remarkable conclusions are drawn based on the molecular dynamic simulation results, i.e., a higher loading speed may result in a complicated path of crack propagation, and the propagation of an armchair crack may be accompanied by sp carbon links at high temperatures. The reason for this is that the stronger thermal vibration reduces the load stress difference near the crack tip and, therefore, the crack tip can pass through the sp link. A crack propagates more easily along the zigzag direction than along the armchair direction. The out-of-plane tearing is more suitable than the in-plane tearing for graphene patterning. The path of crack propagation can be adjusted by changing the loading direction, e.g., a rectangular graphene ribbon can be produced by oblique tearing. This new understanding will benefit the application of graphene patterning via the tearing approach.

A review on removal strategies of microorganisms from water environment using nanomaterials and their behavioural characteristics

Significant findings for microbial removal have led to expertise on several kinds of nanomaterials that made new paths for removing various biological contaminants in a variety of water resources in recent years. Furthermore, advancements in multifunctional nanocomposites synthesis pave the enhanced possibility for their use in water treatment system design. The adsorption towards microbial elimination has been reviewed and compared in this review article using four common kinds of nanomaterials: carbon materials, metal oxides, metal/metal oxides, polymeric metal oxide nanocomposites and their most important mechanistic behavior also discussed. We also describe and analyze recent findings on the effects of engineered nanomaterials on microbial communities in natural and artificial environments. Understanding the removal mechanistic strategy is crucial to improving the nanoparticles (NPs) efficiency and increasing their applicability against a variety of bacteria in various environmental conditions. Also, our study focused on their behavioral effects on microbial structure and functionality towards the removal. Future research opportunities connected to the use of nanomaterials in microbial control and inactivation with societal and health implications are also discussed. We also highlight a number of interesting research subjects that might be of futuristic interest to the scientific community.

Demonstrating and Unraveling a Controlled Nanometer-Scale Expansion of the Vacancy Defects in Graphene by CO2

A controlled manipulation of graphene edges and vacancies is desired for molecular separation, sensing and electronics applications. Unfortunately, available etching methods always lead to vacancy nucleation making it challenging to control etching. Herein, we report CO2 -led controlled etching down to 2-3 Å per minute while completely avoiding vacancy nucleation. This makes CO2 a unique etchant for decoupling pore nucleation and expansion. We show that CO2 expands the steric-hindrance-free edges with an activation energy of 2.71 eV, corresponding to the energy barrier for the dissociative chemisorption of CO2 . We demonstrate the presence of an additional configurational energy barrier for nanometer-sized vacancies resulting in a significantly slower rate of expansion. Finally, CO2 etching is applied to map the location of the intrinsic vacancies in the polycrystalline graphene film where we show that the intrinsic vacancy defects manifest mainly as grain boundary defects where intragrain defects from oxidative etching constitute a minor population.

Facile Gold-Nanoparticle Boosted Graphene Sensor Fabrication Enhanced Biochemical Signal Detection

Graphene has been considered as an excellent biochemical sensors’ substrate material because of its excellent physical and chemical properties. Most of these sensors have employed enzymes, antibodies, antigens, and other biomolecules with corresponding recognition ability as recognition elements, to convert chemical signals into electrical signals. However, oxidoreductase enzymes that grow on graphene surfaces are affected significantly by the environment and are easily inactivated, which hinders the further improvement of detection sensitivity and robusticity. A gold-boosted graphene sensor was fabricated by the in situ electrochemical deposition of inorganic gold nanoparticles on vertical graphene nanosheets. This approach solves the instability of biological enzymes and improves the detection performance of graphene-based sensors. The uric acid sensitivity of the gold-boosted electrode was 6230 µA mM−1 cm−2, which is 6 times higher than the original graphene electrode. A 7 h GNSs/CC electrode showed an impressive detection performance for ascorbic acid, dopamine, and uric acid, simultaneously. Moreover, it exhibited a reliable detection performance in human serum in terms of uric acid. The possible reason could be that the vertical aliened graphene nanosheet acts as a reaction active spot. This 3D graphene-nanosheet-based doping approach can be applied to a wide variety of inorganic catalytic materials to enhance their performance and improve their durability in aspects such as single-atom catalysis and integration of multiple catalytic properties.