Structural framework of fructosyl transfer in Bacillus subtilis levansucrase

A review of fructosyl-transferases from catalytic characteristics and structural features to reaction mechanisms and product specificity

Carbohydrate-active enzymes are accountable for the synthesis and degradation of glycosidic bonds among diverse carbohydrates. Fructosyl-transferases represent a subclass of these enzymes, employing sucrose as a substrate to generate fructooligosaccharides (FOS) and fructan polymers. This category primarily includes levansucrase (LS, EC 2.4.1.10), inulosucrase (IS, EC 2.4.1.9), and β-fructofuranosidase (Ffase, EC 3.2.1.26). These three enzymes possess a similar five-bladed β-propeller fold and employ an anomer-retaining reaction mechanism mediated by nucleophiles, transition state stabilizers, and general acids/bases. However, they exhibit distinct product profiles, characterized by variations in linkage specificity and molecular mass distribution. Consequently, this article comprehensively explores recent advancements in the catalytic characteristics, structural features, reaction mechanisms, and product specificity of levansucrase, inulosucrase, and β-fructofuranosidase (abbreviated as LS, IS, and Ffase, respectively). Furthermore, it discusses the potential for modifying catalytic properties and product specificity through structure-based design, which enables the rational production of custom fructan and FOS.

Insights in inulin binding and inulin oligosaccharide formation by novel multi domain endo-inulinases from Botrytis cinerea

World-wide, pathogenic fungi such as Botrytis cinerea cause tremendous yield losses in terms of food production and post-harvest food decay. Many fungi produce inulin-type oligosaccharides (IOSs) from inulin through endo-inulinases which typically show a two domain structure. B.cinerea lacks a two domain endo-inulinase but contains a three domain structure instead. Genome mining revealed three and four domain (d4) enzymes in the fungal kingdom. Here, three and two domain enzymes were compared in their capacity to produce IOSs from inulin. Hill kinetics were observed in three domain enzymes as compared to Michaelis-Menten kinetics in two domain enzymes, suggesting that the N-terminal extension functions as a carbohydrate binding module. Analysis of the IOS product profiles generated from purified GF6, GF12, GF16 and GF18 inulins and extensive sugar docking approaches led to enhanced insights in the active site functioning, revealing subtle differences between the endo-inulinases from Aspergillus niger and B. cinerea. Improved insights in structure-function relationships in fungal endo-inulinases offer opportunities to develop superior enzymes for the production of specific IOS formulations to improve plant and animal health (priming agents, prebiotics).

A strategy to reduce the byproduct glucose by simultaneously producing levan and single cell oil using an engineered Yarrowia lipolytica strain displaying levansucrase on the surface

Currently, levan is attracting attention due to its promising applications in the food and biomedical fields. Levansucrase synthesizes levan by polymerizing the fructosyl unit in sucrose. However, a large amount of the byproduct glucose is produced during this process. In this paper, an engineered oleaginous yeast (Yarrowia lipolytica) strain was constructed using a surface display plasmid containing the LevS gene of Gluconobacter sp. MP2116. The levansucrase activity of the engineered yeast strain reached 327.8 U/g of cell dry weight. The maximal levan concentration (58.9 g/l) was achieved within 156 h in the 5-liter fermentation. Over 81.2 % of the sucrose was enzymolyzed by the levansucrase, and the byproduct glucose was converted to 21.8 g/l biomass with an intracellular oil content of 25.5 % (w/w). The obtained oil was comprised of 91.3 % long-chain fatty acids (C16-C18). This study provides new insight for levan production and comprehensive utilization of the byproduct in levan biosynthesis.

Insights into the heterogeneity of levan polymers synthesized by levansucrase Bs-SacB from Bacillus subtilis 168

Levan is an enzymatically synthesized fructose polymer with widely reported structural heterogeneity depending on the producing levansucrase, the reaction conditions employed for its synthesis and the characterization techniques. We studied here the specific properties of levan produced by recombinant levansucrase from B. subtilis 168 (Bs-SacB), often characterized as a bimodal distribution, that is, a mixture of low and high molecular weight levan. We found significant differences between both levans in terms of the already reported molecular weight, size and morphology using different analytical methods. The low molecular weight levan consists of a non-uniform polymer ranging from 50 to 230 kDa, synthesized through a non-processive mechanism that can spontaneously form spherical nanoparticles in the reaction medium. In contrast, high molecular weight levan is a uniform polymer, most probably synthesized through a processive mechanism, with an average molecular weight of 30,750 kDa and a poorly defined nano-structure. This is the first report exploring differences in morphology between low and high molecular weight levans. Our findings demonstrate that only the low molecular weight levan forms spherical nanoparticles in the reaction medium and that high molecular weight levan is mainly composed of a 33,000 kDa fraction with a microgel behavior.

Glycoside hydrolase family 32 enzymes from Bombella spp. catalyze the formation of high-molecular weight fructans from sucrose

AIMS

Acetic acid bacteria of the genus Bombella have not been reported to produce exopolysaccharides (EPS). In this study, the formation of fructans by B. apis TMW 2.1884 and B. mellum TMW 2.1889 was investigated.

METHODS AND RESULTS

Out of eight strains from four different Bombella species, only B. apis TMW 2.1884 and B. mellum TMW 2.1889 showed EPS formation with 50 g l-1 sucrose as substrate. Both EPS were identified as high-molecular weight (HMW) polymers (106-107 Da) by asymmetric flow field-flow fractionation coupled to multi angle laser light scattering and UV detecors (AF4-MALLS/UV) and high performance size exclusion chromatography coupled to MALLS and refractive index detectors (HPSEC-MALLS/RI) analyses. Monosaccharide analysis via trifluoroacetic acid hydrolysis showed that both EPS are fructans. Determination of glycosidic linkages by methylation analysis revealed mainly 2,6-linked fructofuranose (Fruf) units with additional 2,1-linked Fruf units (10%) and 2,1,6-Fruf branched units (7%). No glycoside hydrolase (GH) 68 family genes that are typically associated with the formation of HMW fructans in bacteria could be identified in the genomes. Through heterologous expression in Escherichia coli Top10, an enzyme of the GH32 family could be assigned to the catalysis of fructan formation. The identified fructosyltransferases could be clearly differentiated phylogenetically and structurally from other previously described bacterial fructosyltransferases.

CONCLUSIONS

The formation of HMW fructans by individual strains of the genus Bombella is catalyzed by enzymes of the GH32 family. Analysis of the fructans revealed an atypical structure consisting of 2,6-linked Fruf units as well as 2,1-linked Fruf units and 2,1,6-Fruf units.

Hydrolysis-transglycosylation of sucrose and production of β-(2→1)-fructan by inulosucrase from Neobacillus drentensis 57N

Inulin, β-(2→1)-fructan, is a beneficial polysaccharide used as a functional food ingredient. Microbial inulosucrases (ISs), catalyzing β-(2→1)-transfructosylation, produce β-(2→1)-fructan from sucrose. In this study, we identified a new IS (NdIS) from the soil isolate, Neobacillus drentensis 57N. Sequence analysis revealed that, like other Bacillaceae ISs, NdIS consists of a glycoside hydrolase family 68 domain and shares most of the 1-kestose-binding residues of the archaeal IS, InuHj. Native and recombinant NdIS were characterized. NdIS is a homotetramer. It does not require calcium for activity. High performance liquid chromatography and 13C-nuclear magnetic resonance indicated that NdIS catalyzed the hydrolysis and β-(2→1)-transfructosylation of sucrose to synthesize β-(2→1)-fructan with chain lengths of 42 or more residues. The rate dependence on sucrose concentration followed hydrolysis-transglycosylation kinetics, and a 50% transglycosylation ratio was obtained at 344 m m sucrose. These results suggest that transfructosylation from sucrose to β-(2→1)-fructan occurs predominantly to elongate the fructan chain because sucrose is an unfavorable acceptor.

Retron-mediated multiplex genome editing and continuous evolution in Escherichia coli

While there are several genome editing techniques available, few are suitable for dynamic and simultaneous mutagenesis of arbitrary targeted sequences in prokaryotes. Here, to address these limitations, we present a versatile and multiplex retron-mediated genome editing system (REGES). First, through systematic optimization of REGES, we achieve efficiency of ∼100%, 85 ± 3%, 69 ± 14% and 25 ± 14% for single-, double-, triple- and quadruple-locus genome editing, respectively. In addition, we employ REGES to generate pooled and barcoded variant libraries with degenerate RBS sequences to fine-tune the expression level of endogenous and exogenous genes, such as transcriptional factors to improve ethanol tolerance and biotin biosynthesis. Finally, we demonstrate REGES-mediated continuous in vivo protein evolution, by combining retron, polymerase-mediated base editing and error-prone transcription. By these case studies, we demonstrate REGES as a powerful multiplex genome editing and continuous evolution tool with broad applications in synthetic biology and metabolic engineering.

Characterization and alteration of product specificity of Beijerinckia indica subsp. indica β-fructosyltransferase

The trisaccharide 1-kestose, a major constituent of fructooligosaccharide, has strong prebiotic effects. We used high-performance liquid chromatography and 1H nuclear magnetic resonance spectroscopy to show that BiBftA, a β-fructosyltransferase belonging to glycoside hydrolase family 68, from Beijerinckia indica subsp. indica catalyzes transfructosylation of sucrose to produce mostly 1-kestose and levan polysaccharides. We substituted His395 and Phe473 in BiBftA with Arg and Tyr, respectively, and analyzed the reactions of the mutant enzymes with 180 g/L sucrose. The ratio of the molar concentrations of glucose and 1-kestose in the reaction mixture with wild-type BiBftA was 100:8.1, whereas that in the reaction mixture with the variant H395R/F473Y was 100:45.5, indicating that H395R/F473Y predominantly accumulated 1-kestose from sucrose. The X-ray crystal structure of H395R/F473Y suggests that its catalytic pocket is unfavorable for binding of sucrose while favorable for transfructosylation.

Multiscale QM/MM Simulations Identify the Roles of Asp239 and 1-OH···Nucleophile in Transition State Stabilization in Arabidopsis thaliana Cell-Wall Invertase 1

Arabidopsis thaliana cell-wall invertase 1 (AtCWIN1), a key enzyme in sucrose metabolism in plants, catalyzes the hydrolysis of sucrose into fructose and glucose. AtCWIN1 belongs to the glycoside hydrolase GH-J clan, where two carboxylate residues (Asp23 and Glu203 in AtCWIN1) are well documented as a nucleophile and an acid/base catalyst. However, details at the atomic level about the role of neighboring residues and enzyme-substrate interactions during catalysis are not fully understood. Here, quantum mechanical/molecular mechanical (QM/MM) free-energy simulations were carried out to clarify the origin of the observed decreased rates in Asp239Ala, Asp239Asn, and Asp239Phe in AtCWIN1 compared to the wild type and delineate the role of Asp239 in catalysis. The glycosylation and deglycosylation steps were considered in both wild type and mutants. Deglycosylation is predicted to be the rate-determining step in the reaction, with a calculated overall free-energy barrier of 15.9 kcal/mol, consistent with the experimental barrier (15.3 kcal/mol). During the reaction, the -1 furanosyl ring underwent a conformational change corresponding to 3E ↔ [E2]⧧ ↔ 1E according to the nomenclature of saccharide structures along the full catalytic reaction. Asp239 was found to stabilize not only the transition state but also the fructosyl-enzyme intermediate, which explains findings from previous structural and mutagenesis experiments. The 1-OH···nucleophile interaction has been found to provide an important contribution to the transition state stabilization, with a contribution of ∼7 kcal/mol, and affected glycosylation more significantly than deglycosylation. This study provides molecular insights that improve the current understanding of sucrose binding and hydrolysis in members of clan GH-J, which may benefit protein engineering research. Finally, a rationale on the sucrose inhibitor configuration in chicory 1-FEH IIa, proposed a long time ago in the literature, is also provided based on the QM/MM calculations.

Rational design of a self-assembly promoting fusion domain enhances high molecular weight levan synthesis by levansucrase SacB

The catalytic product of levansucrase from Bacillus subtilis (SacB) is mainly composed of 10 % high molecular weight levan (HMW, ~2000 kDa) and 90 % low molecular weight levan (LMW, ~7000 Da). In order to achieve efficient production of food hydrocolloid, high molecular weight levan (HMW), with the help of molecular dynamics simulation software, a protein self-assembly element, Dex-GBD, was found and fused with the C-terminus of SacB to construct a novel fusion enzyme, SacB-GBD. The product distribution of SacB-GBD was reversed compared with SacB, and the proportion of HMW in the total polysaccharide was significantly increased to >95 %. We then confirmed that the self-assembly was responsible for the reversal of the SacB-GBD product distribution by the simultaneous modulation of SacB-GBD particle size and product distribution by SDS. The hydrophobic effect may be the main driver of self-assembly as analyzed by molecular simulations and hydrophobicity determination. Our study provides an enzyme source for the industrial production of HMW and provides a new theoretical basis for guiding the molecular modification of levansucrase towards the size of the catalytic product.

Physiological and transcriptional studies reveal Cr(VI) reduction mechanisms in the exoelectrogen Cellulomonas fimi Clb-11

A facultative exoelectrogen, Cellulomonas fimi strain Clb-11, was isolated from polluted river water. This strain could generate electricity in microbial fuel cells (MFCs) with carboxymethyl cellulose (CMC) as the carbon source, and the maximum output power density was 12.17 ± 2.74 mW·m^-2. In addition, Clb-11 could secrete extracellular chromate reductase or extracellular electron mediator to reduce Cr(VI) to Cr(III). When the Cr(VI) concentration was less than 0.5 mM in Luria-Bertani (LB) medium, Cr(VI) could be completely reduced by Clb-11. However, the Clb-11 cells swelled significantly in the presence of Cr(VI). We employed transcriptome sequencing analysis to identify genes involved in different Cr(VI) stress responses in Clb-11. The results indicate that 99 genes were continuously upregulated while 78 genes were continuously downregulated as the Cr(VI) concentration increased in the growth medium. These genes were mostly associated with DNA replication and repair, biosynthesis of secondary metabolites, ABC transporters, amino sugar and nucleotide sugar metabolism, and carbon metabolism. The swelling of Clb-11 cells might have been related to the upregulation of the genes atoB, INO1, dhaM, dhal, dhak, and bccA, which encode acetyl-CoA C-acetyltransferase, myo-inositol-1-phosphate synthase, phosphoenolpyruvate-glycerone phosphotransferase, and acetyl-CoA/propionyl-CoA carboxylase, respectively. Interestingly, the genes cydA and cydB related to electron transport were continuously downregulated as the Cr(VI) concentration increased. Our results provide clues to the molecular mechanism of Cr(VI) reduction by microorganisms in MFCs systems.

Successful Manipulation of the Product Spectrum of the Erwinia amylovora Levansucrase by Modifying the Residues around loop1, Loop 3, and Loop 4

Levansucrase (LS, EC 2.4.1.10) catalyzes the synthesis of levan by successively transferring the fructosyl moiety from sucrose to an elongated fructan chain. Although the product distribution of LS from Erwinia amylovora (Ea-LS) was studied under different sucrose concentrations, the effect of residues on the product formation is yet unknown. The first levanhexaose-complexed structure of LS from Bacillus subtilis (Bs-SacB) provided information on the oligosaccharide binding sites (OB sites), from +1 to +4 subsites. Since Ea-LS would efficiently produce fructooligosaccharides, a substitution mutation of OB sites in Bs-SacB and the corresponding residues of Ea-LS were conducted to investigate how these mutants would influence the product distribution. As a result, a series of mutants with different product spectrum were obtained. Notably, the mutants of G98E, V151F, and N200T around loop 1, loop 3, and loop 4 all showed a significant increase in both the molecular mass and the yield of high-molecular-mass levan, suggesting that the product profile of Ea-LS was significantly modified.

Engineering the β-Fructofuranosidase Fru6 with Promoted Transfructosylating Capacity for Fructooligosaccharide Production

Levan-type fructooligosaccharides (FOS) exhibit enhanced health-promoting prebiotic effects on gut microbiota. The wild type (WT) of β-fructofuranosidase Fru6 could mainly yield 6-ketose. Semirational design and mutagenesis of Fru6 were exploited to promote the transfructosylating capacity for FOS. The promising variants not only improved the formation of 6-kestose but also newly produced tetrasaccharides of 6,6-nystose and 1,6-nystose (a new type of FOS), and combinatorial mutation boosted the production of 6-kestose and tetrasaccharides (39.9 g/L 6,6-nystose and 4.6 g/L 1,6-nystose). Molecular docking and molecular dynamics (MD) simulation confirmed that the mutated positions reshaped the pocket of Fru6 to accommodate bulky 6-kestose in a reactive conformation with better accessibility for tetrasaccharides formation. Using favored conditions, the variant S165A/H357A could yield 6-kestose up to 335 g/L, and tetrasaccharides (6,6-nystose and 1,6-nystose) reached a high level of 121.1 g/L (134.5 times of the mutant S423A). The β-(2,6)-linked FOS may show the potential application for the prebiotic ingredients.

Erwinia tasmaniensis levansucrase shows enantiomer selection for (S)-1,2,4-butanetriol

Levansucrases are useful tools in biotechnology for the synthesis of fructosyl glycosides. The structure of Erwinia tasmaniensis levansucrase in complex with (S)-1,2,4-butanetriol suggests a possible influence of polyols with defined stereocentres in the modulation of fructosylation.

Levansucrases are biotechnologically interesting fructosyltransferases due to their potential use in the enzymatic or chemo-enzymatic synthesis of glycosides of non-natural substrates relevant to pharmaceutical applications. The structure of Erwinia tasmaniensis levansucrase in complex with (S)-1,2,4-butanetriol and its biochemical characterization suggests the possible application of short aliphatic moieties containing polyols with defined stereocentres in fructosylation biotechnology. The structural information revealed that (S)-1,2,4-butanetriol mimics the natural substrate. The preference of the protein towards a specific 1,2,4-butanetriol enantiomer was assessed using microscale thermophoresis binding assays. Furthermore, the results obtained and the structural comparison of levansucrases and inulosucrases suggest that the fructose binding modes could differ in fructosyltransferases from Gram-positive and Gram-negative bacteria.

Rapid, real-time sucrase characterization: Showcasing the feasibility of a one-pot activity assay

Sucrases can modify numerous carbohydrates, and short-chain oligosaccharides produced by the unique transfructosylation activity of levansucrases are promising candidates for the growing sugar substitute market. These compounds could counteract the increasing number of diseases associated with the consumption of high-calorie sugars. Thus, there is great interest in the characterization of novel levansucrases. The commonly used method for sucrase activity determination is to quantify d-glucose released in the sucrose-splitting reaction. This is usually done in a discontinuous mode, i.e., several samples taken from the sucrase reaction are applied to a separately performed d-glucose determination (e.g., GOPOD assay). Employing the newly isolated levansucrase LevS_KK21 from Pseudomonas sp. KK21, the feasibility of a one-pot sucrase characterization was investigated by combining sucrase reaction and GOPOD-based d-glucose determination into a single, continuous assay (Real-time GOPOD). The enzyme was characterized with respect to kinetic parameters, ion dependency, pH value, and reaction temperature in a comparative approach employing Real-time GOPOD and HPLC. High data consistency for all investigated enzyme parameters demonstrated that current processes for sucrase characterization can be considerably accelerated by the continuous assay while maintaining data validity. However, the assay was not applicable at acidic pH, as decolorization of the quinoneimine dye formed during the GOPOD reaction was observed. Overall, the study presents valuable data on the potentials of real-time sucrase activity assessment for an accelerated discovery and characterization of interesting enzymes such as the hereby introduced levansucrase LevS_KK21. Progress in sucrase discovery will finally foster the development of health-promoting sucrose substitutes.

Crystal Structure of Levansucrase from the Gram-Negative Bacterium Brenneria Provides Insights into Its Product Size Specificity

Microbial levansucrases (LSs, EC 2.4.1.10) have been widely studied for the synthesis of β-(2,6)-fructans (levan) from sucrose. LSs synthesize levan-type fructo-oligosaccharides, high-molecular-mass levan polymer or combinations of both. Here, we report crystal structures of LS from the G^--bacterium Brenneria sp. EniD 312 (Brs-LS) in its apo form, as well as of two mutants (A154S, H327A) targeting positions known to affect LS reaction specificity. In addition, we report a structure of Brs-LS complexed with sucrose, the first crystal structure of a G^--LS with a bound substrate. The overall structure of Brs-LS is similar to that of G^-- and G⁺-LSs, with the nucleophile (D68), transition stabilizer (D225), and a general acid/base (E309) in its active site. The H327A mutant lacks an essential interaction with glucosyl moieties of bound substrates in subsite +1, explaining the observed smaller products synthesized by this mutant. The A154S mutation affects the hydrogen-bond network around the transition stabilizing residue (D225) and the nucleophile (D68), and may affect the affinity of the enzyme for sucrose such that it becomes less effective in transfructosylation. Taken together, this study provides novel insights into the roles of structural elements and residues in the product specificity of LSs.

Structure–Function Relationship Studies of Multidomain Levansucrases from Leuconostocaceae Family

Levansucrase LevS from Leuconostoc mesenteroides B-512F is a multidomain fructansucrase (MD-FN) that contains additional domains (ADs) to the catalytic domain. However, the understanding of the effect that these ADs have on enzyme activity remains vague. To this aim, structure-function relationship studies of these LevS ADs were performed by evaluating both biochemical properties and the enzymatic capacity of truncated versions of LevS. Joint participation of the N- and C-terminal domains is essential for stability, activity, specificity, and polymerization processes. Specifically, the N-terminal region is involved in stability, while the transition region plays an essential role in the transfructosylation reaction and polymer elongation. Based on our results, we suggest that ADs interact with each other, adopting a U-shaped topology. The importance of these ADs observed in the MD-FN of the Leuconostocaceae family is not shared by the Lactobacillaceae family. Phylogenetic analysis of LevS AD suggests that MD-FN from Lactobacillaceae and Leuconostocaceae have different evolutionary origins. This is the first study on the structure-function relationship of multidomain levansucrases from the Leuconostocaceae family. Our results point towards the functional role of AD in MD-FN and its involvement in fructan synthesis.

Synergistic enzyme cocktail between levansucrase and inulosucrase for superb levan-type fructooligosaccharide synthesis

Inulosucrase (ISC) and levansucrase (LSC) utilise sucrose and produce inulin- and levan-type fructans, respectively. This study aims to propose a new strategy to improve levan-type fructooligosaccharide (L-FOS) production. The effect of ISC/ LSC -mixed reaction was elucidated on L-FOS production. The presence of ISC in the LSC reaction significantly leads to the higher production of L-FOSs as the main products. Furthermore, the different ratios between ISC and LSC affected the distribution of L-FOSs. A greater amount of ISC compared to LSC promoted the synthesis of short-chain L-FOSs. Conversely, when LSC was increased, the synthesis of longer-chain L-FOSs was enhanced. The addition of trisaccharide mixtures obtained from either a single ISC or LSC reaction could enhance L-FOSs synthesis in the LSC reaction. Analysis of these trisaccharides revealed that most species of the oligosaccharides were similar, with 1-kestose being the major one. The supplement of only 1-kestose in the LSC reaction showed similar results to those of the reaction in the presence of trisaccharide mixtures. Moreover, the results were supported by molecular dynamics simulations. This work not only provides an improvement in L-FOS production but also revealed and supported some insights into the mechanism of fructansucrases.

Crystal Structure of a Sucrose-6-phosphate Hydrolase from Lactobacillus gasseri with Potential Applications in Fructan Production and the Food Industry

Fructooligosaccharides (FOSs) are polymers of fructose with a prebiotic activity because of their production and fermentation by bacteria that inhabit the gastrointestinal tract and are widely used in the industry and new functional foods. Lactobacillus gasseri stands out as an important homofermentative microorganism related to FOS production, and its potential applications in the industry are undeniable. In this study, we report the production and characterization of a sucrose-6-phosphate hydrolase from L. gasseri belonging to the GH32 family. Apo-LgAs32 and LgAs32 complexed with β-d-fructose structures were determined at a resolution of 1.94 and 1.84 Å, respectively. The production of FOS, fructans, 1-kestose, and nystose by the recombinant LgAs32, using sucrose as a substrate, shown in this study is very promising. When compared to its homologous enzyme from Lactobacillus reuteri, the production of 1-kestose by LgAs32 is increased; thus, LgAs32 can be considered as an alternative in fructan production and other industrial applications.

Preventive effect of Bacillus mojavensis levan against carbon tetrachloride and cisplatin toxicity: in vivo study

This study is the first to investigate the hepato- and nephron-preventive effect of levan from Bacillus mojavensis (BM-levan) against toxicity induced by carbon tetrachloride (CCl₄) and cisplatin. Thirty-six male albino rats weighing between 230 and 250 g were used for this experiment. The groups received multiples doses of BM-levan and were compared to the untreated group. The in vitro and in vivo biological potentials of BM-levan were evaluated by measuring its antioxidant capacity as well as its hepato- and nephron-protective activities in rat models. The investigations highlighted a significant in vitro antioxidant activity indicated by the radical-scavenging capacity, the reducing power, and the total antioxidant activity measurement. In addition, results demonstrate that BM-levan supplementation during 8 weeks (100 mg/kg body weight) significantly (p < 0.05) decreased aspartate aminotransferase (AST) and alanine aminotransferase (ALT) activities and remarkably (p < 0.05) attenuated the altered lipid profile by decreasing the levels of triglycerides (TG) and total cholesterol (TC), LDL cholesterol (LDL-C) and by enhancing the HDL cholesterol (HDL-C) content, when compared with the CCl₄ group. BM-levan also reduced the content of plasma renal biomarkers (urea, creatinine, and uric acid) in the cisplatin-treated group. Moreover, BM-levan inhibited hepatic and renal oxidative stress generated by CCl₄ and cisplatin administration, through the enhancement of the antioxidant catalase (CAT), superoxide dismutase (SOD), and glutathione peroxidase (GPx) and the diminishment of lipid peroxidation. The harmful effects of CCl₄ or cisplatin on hepatic and renal histology were found to be decreased by the addition of BM-levan. Therefore, BM-levan has proved promising for biomedical applications thanks to its in vitro and in vivo antioxidant properties.

Molecular and biochemical characteristics of inulosucrase InuBK from Alkalihalobacillus krulwichiae JCM 11691

Information about the inulosucrase of nonlactic acid bacteria is scarce. We found a gene encoding inulosucrase (inuBK) in the genome of the Gram-positive bacterium Alkalihalobacillus krulwichiae JCM 11691. The inuBK open reading frame encoded a protein comprising 456 amino acids. We expressed His-tagged InuBK in culture medium using a Brevibacillus system. The optimal pH and temperature of purified InuBK were 7.0-9.0 and 50-55 °C, respectively. The findings of high-performance anion-exchange chromatography, nuclear magnetic resonance spectroscopy, and high-performance size-exclusion chromatography with multiangle laser light scattering showed that the polysaccharide produced by InuBK was an inulin with a molecular weight of 3806, a polydispersity index (PI) of 1.047, and fructosyl chain lengths with 3-27 degrees of polymerization. The size of InuBK was smaller than commercial inulins, and the PI of the inulin that it produced was lower.

Improving the catalytic behaviors of Lactobacillus-derived fructansucrases by truncation strategies

Fructansucrases (FSs), including inulosucrase (IS) and levansucrase (LS), are the members of the Glycoside Hydrolase family 68 (GH68) enzymes. IS and LS catalyze the polymerization of the fructosyl moiety from sucrose to inulin- and levan-type fructans, respectively. Lactobacillus-derived FSs have relatively extended N- and C-terminal sequences. However, the functional roles of these sequences in their enzymatic properties and fructan biosynthesis remain largely unknown. Limosilactobacillus reuteri (basionym: Lactobacillus reuteri) 121 could produce both IS and LS, abbreviated as Lare121-IS and Lare121-LS, respectively. In this study, it was found that the terminal truncation displayed an obvious effect on their activities and the N-terminal truncated variants, Lare121-ISΔ177-701 and Lare121-LSΔ154-686, displayed the highest activities. Melting temperature (T_m) and the thermostability at 50 °C were measured to evaluate the stability of various truncated versions, revealing the different effects of N-terminal on the stability. The average molecular weight and polymerization degree of the fructans produced by different truncated variants did not change considerably, indicating that N-terminal truncation had low influence on fructan biosynthesis. In addition, it was found that N-terminal truncation could also improve the activity of other reported FSs from Lactobacillus species.

Computational Design of Oligosaccharide-Producing Levansucrase from Bacillus licheniformis RN-01 to Increase Its Stability at High Temperature

Levan-type fructooligosaccharides (LFOs) and levan can potentially be used as ingredients in prebiotics, skincare products, and antitumor agents. The Y246S mutant of Bacillus licheniformis RN-01 levansucrase (oligosaccharide-producing levansucrase, OPL) was reported to productively synthesize LFOs; however, OPL's thermostability is low at high temperatures. To enhance OPL structural stability, this study employed molecular dynamics (AMBER) to identify a highly flexible region, as measured by its average root-mean-square fluctuation (RMSF) value, on the OPL surface and computational protein design (Rosetta) to rigidify and increase favorable interactions to increase its structural stability. AMBER identified region nine (residues 277-317) as a highly flexible region that was selected for design because it has the highest number of residues and the second-highest average RMSF, and it is farthest from the active site. Rosetta designed 14 mutants with the best ΔΔG value in each position, where three mutants have better ΔG than OPL. To determine whether their flexibilities and stabilities are lower than those of OPL, all 14 designed mutants were simulated at high temperature (500 K), and we found that K296E, G309S, and A310W mutants were predicted to be more stable and could retain their native structures better than OPL. Our results suggest that enhanced structural stabilities of these mutants are caused by increased hydrogen bond strengths of the designed residues and their neighboring residues. This study designed K296E, G309S, and A310W mutants of OPL with high potential for stability improvement, and they could potentially be used for the effective production of LFOs.

Functional and Molecular Characterization of the Halomicrobium sp. IBSBa Inulosucrase

Fructans are fructose-based (poly)saccharides with inulin and levan being the best-known ones. Thanks to their health-related benefits, inulin-type fructans have been under the focus of scientific and industrial communities, though mostly represented by plant-based inulins, and rarely by microbial ones. Recently, it was discovered that some extremely halophilic Archaea are also able to synthesize fructans. Here, we describe the first in-depth functional and molecular characterization of an Archaeal inulosucrase from Halomicrobium sp. IBSBa (HmcIsc). The HmcIsc enzyme was recombinantly expressed and purified in Escherichia coli and shown to synthesize inulin as proven by nuclear magnetic resonance (NMR) analysis. In accordance with the halophilic lifestyle of its native host, the enzyme showed maximum activity at very high NaCl concentrations (3.5 M), with specific adaptations for that purpose. Phylogenetic analyses suggested that Archaeal inulosucrases have been acquired from halophilic bacilli through horizontal gene transfer, with a HX(H/F)T motif evolving further into a HXHT motif, together with a unique D residue creating the onset of a specific alternative acceptor binding groove. This work uncovers a novel area in fructan research, highlighting unexplored aspects of life in hypersaline habitats, and raising questions about the general physiological relevance of inulosucrases and their products in nature.

Crystal structure of an inulosucrase from Halalkalicoccus jeotgali B3T, a halophilic archaeal strain

Several archaea harbor genes that code for fructosyltransferase (FTF) enzymes. These enzymes have not been characterized yet at structure-function level, but are of extreme interest in view of their potential role in the synthesis of novel compounds for food, nutrition, and pharmaceutical applications. In this study, 3D structure of an inulin-type fructan producing enzyme, inulosucrase (InuHj), from the archaeon Halalkalicoccus jeotgali was resolved in its apo form and with bound substrate (sucrose) molecule and first transglycosylation product (1-kestose). This is the first crystal structure of an FTF from halophilic archaea. Its overall five-bladed β-propeller fold is conserved with previously reported FTFs, but also shows some unique features. The InuHj structure is closer to those of Gram-negative bacteria, with exceptions such as residue E266, which is conserved in FTFs of Gram-positive bacteria and has possible role in fructan polymer synthesis in these bacteria as compared to fructooligosaccharide (FOS) production by FTFs of Gram-negative bacteria. Highly negative electrostatic surface potential of InuHj, due to a large amount of acidic residues, likely contributes to its halophilicity. The complex of InuHj with 1-kestose indicates that the residues D287 in the 4B-4C loop, Y330 in 4D-5A, and D361 in the unique α2 helix may interact with longer FOSs and facilitate the binding of longer FOS chains during synthesis. The outcome of this work will provide targets for future structure-function studies of FTF enzymes, particularly those from archaea.

Cloning and Expression of Levansucrase Gene of Bacillus velezensis BM-2 and Enzymatic Synthesis of Levan

Levan is a versatile and valuable fructose homopolymer, and a few bacterial strains have been found to produce levan. Although levan products have numerous specific functions, their application and promotion were limited by the production capacity and production cost. Bacillus velezensis BM-2 is a levan-synthesizing strain, but its levan production is too low to apply. In this study, the levansucrase gene of B. velezensis BM-2 was cloned to plasmid pET-32a-Acma-zz, and the recombinant plasmids were transferred to Escherichia coli BL21. A transformed clone was selected to express and secrete the fusion enzymes with an Acma-tag efficiently. The expressed products were further purified by a self-developed separating material called bacterial enhancer matrix (BEM) particles. The purification efficiency was 93.4%, with a specific activity of 16.589 U/mL protein. The enzymatic reaction results indicated that the optimal reaction temperature is 50 °C, the optimal pH of the acetate buffer is 5.6, and the buffer system greatly influenced the enzyme activity. The enzyme activity was enhanced to 130% in the presence of 5 mM Ca2+, K+, Zn2+, and Mn2+, whereas it was almost abolished in the case of Cu2+ and Fe3+. The values of Km, kcat, and kcat/Km were 17.41 mM, 376.83 s−1, and 21.64 mM−1s−1, respectively. The enzyme amount of 20 U/g sucrose was added to the system containing 400 g/L sucrose, and the levan products with a concentration of 120 g/L reached after an incubation of 18 h, which was 8 times that of the yield before optimization. The results of molecular docking analysis indicated that the Asp86 might act as a nucleophilic catalytic residue for sucrose, Arg246 and Asp247 act as transition state stabilizer of transfructosylation, and Glu340 and Arg306 were recognized as general acid donors. They formed the catalytic-groups triad. The unique properties and catalytic activity of the levansucrase suggest that it deserves further research and might have good industrial application prospects.

The molecular basis of the nonprocessive elongation mechanism in levansucrases

Levansucrases (LSs) synthesize levan, a β2-6-linked fructose polymer, by successively transferring the fructosyl moiety from sucrose to a growing acceptor molecule. Elucidation of the levan polymerization mechanism is important for using LSs in the production of size-defined products for application in the food and pharmaceutical industries. For a deeper understanding of the levan synthesis reaction, we determined the crystallographic structure of Bacillus subtilis LS (SacB) in complex with a levan-type fructooligosaccharide and utilized site-directed mutagenesis to identify residues involved in substrate binding. The presence of a levanhexaose molecule in the central catalytic cavity allowed us to identify five substrate-binding subsites (−1, +1, +2, +3, and +4). Mutants affecting residues belonging to the identified acceptor subsites showed similar substrate affinity (Km) values to the wildtype (WT) Km value but had a lower turnover number and transfructosylation/hydrolysis ratio. Of importance, compared with the WT, the variants progressively yielded smaller-sized low-molecular-weight levans, as the affected subsites that were closer to the catalytic site, but without affecting their ability to synthesized high-molecular-weight levans. Furthermore, an additional oligosaccharide-binding site 20 Å away from the catalytic pocket was identified, and its potential participation in the elongation mechanism is discussed. Our results clarify, for the first time, the interaction of the enzyme with an acceptor/product oligosaccharide and elucidate the molecular basis of the nonprocessive levan elongation mechanism of LSs.

Crystal structure of a glycoside hydrolase family 68 β-fructosyltransferase from Beijerinckia indica subsp. indica in complex with fructose

An enzyme belonging to glycoside hydrolase family 68 (GH68) from Beijerinckia indica subsp. indica NBRC 3744 was expressed in Escherichia coli. Biochemical characterization showed that the enzyme was identified to be a β-fructosyltransferase (BiBftA). Crystallization of a full-length BiBftA was initially attempted, but no crystals were obtained. We constructed a variant in which 5 residues (Pro199-Gly203) and 13 residues (Leu522-Gln534) in potentially flexible regions were deleted, and we successfully crystallized this variant BiBftA. BiBftA is composed of a five-bladed β-propeller fold as in other GH68 enzymes. The structure of BiBftA in complex with fructose unexpectedly indicated that one β-fructofuranose (β-Fruf) molecule and one β-fructopyranose molecule bind to the catalytic pocket. The orientation of β-Fruf at subsite −1 is tilted from the orientation observed in most GH68 enzymes, presenting a second structure of a GH68 enzyme in complex with the tilted binding mode of β-Fruf.

Insight into the effects and biotechnological production of kestoses, the smallest fructooligosaccharides

Kestoses, the smallest fructooligosaccharides, are trisaccharides composed of a fructose molecule and a sucrose molecule linked by either β-(2,1) or β-(2,6) linkage. 1-kestose, 6-kestose and neokestose are the three types of kestoses occurring in nature. As the main kind of fructooligosaccharide, kestoses share similar physiological effects with other fructooligosaccharides, and they have recently been determined to show more notable effects in promoting the growth of probiotics including Faecalibacterium prausnitzii and Bifidobacterium than those of other fructooligosaccharides. Kestoses exist in many plants, but the relatively low content and the isolation and purification are the main barriers limiting their industrial application. The production of kestoses by enzymatic biosynthesis and microbial fermentation has the potential to facilitate its production and industrial use. In this article, the recent advances in the research of kestoses were overviewed, including those studying their functions and production. Kestose-producing enzymes were introduced in detail, and microbial production and fermentation optimization techniques for enhancing the yield of kestoses were addressed. β-Fructofuranosidase is the main one used to produce kestoses because of the extensive range of microbial sources. Therefore, the production of kestoses by microorganisms containing β-fructofuranosidase has also been reviewed. However, few molecular modification studies have attempted to change the production profile of some enzymes and improve the yield of kestoses, which is a topic that should garner more attention. Additionally, the production of kestoses using food-grade microorganisms may be beneficial to their application in the food industry.

Decreased expression of fructosyltransferase genes in asparagus roots may contribute to efficient fructan degradation during asparagus spear harvesting

Asparagus (Asparagus officinalis L.) accumulates inulin and inulin neoseries-type fructans in root, which are synthesized by three fructosyltransferases-sucrose:sucrose 1-fructosyltransferase (1-SST, EC 2.4.1.99), fructan:fructan 1-fructosyltransferase (1-FFT, EC 2.4.1.100), and fructan:fructan 6^G-fructosyltransferase (6G-FFT, EC 2.4.1.243). Fructans in roots are considered as energy sources for emerging of spears, and it has been demonstrated that a gradual decrease in root fructan content occurs during the spear harvesting season (budding and shooting up period). However, the roles of certain three fructosyltransferases during the harvest season have not yet been elucidated. Here, we investigated the variation in enzymatic activities and gene expression levels of three fructosyltransferases and examined sugar contents in roots before and during the spear harvest period. Two cDNAs, aoft2 and aoft3, were isolated from the cDNA library of roots. The respective recombinant proteins (rAoFT2 and rAoFT3), produced by Pichia pastoris, were characterized: rAoFT2 showed 1-FFT activity (producing nystose from 1-kestose), whereas rAoFT3 showed 1-SST activity (producing 1-kestose from sucrose). These reaction profiles of recombinant proteins were similar to those of native enzymes purified previously. These results indicate that aoft2 and aoft3 encoding 1-FFT and 1-SST are involved in fructan synthesis in roots. A gradual downregulation of fructosyltransferase genes and activity of respective enzymes was observed in roots during the harvest period, which also coincided with the decrease in fructooligosaccharides and increase in fructose due to fructan exohydrolase activity. These findings suggest that downregulation of fructosyltransferases genes during harvest time may contribute to efficient degradation of fructan required for the emergence of spears.

Integrated metabonomic-proteomic analysis reveals the effect of glucose stress on metabolic adaptation of Lactococcus lactis ssp. lactis CICC23200

A combined proteomic and metabonomic approach was used to investigate the metabolism of Lactococcus lactis ssp. lactis subjected to glucose stress treatment. A proteomic method was used to determine 1,427 altered proteins, including 278 proteins with increased expression and 255 proteins with decreased expression. A metabonomic approach was adopted to identify 98 altered metabolites, including 62 metabolites with increased expression and 26 metabolites with decreased expression. The integrated analysis indicated that the RNA and DNA mismatch repair process and energy metabolism were enhanced in response to high-glucose stress in L. lactis. Lactococcus lactis responded to glucose stress by up-regulating oxidoreductase activity, which acted on glycosyl bonds, hydrolase activity, and organic acid transmembrane transporter activity. This led to an improvement in the metabolic flux from glucose to pyruvate, lactate, acetate, and maltose. Down-regulation of amino acid transmembrane transporter, aminoacyl-transfer RNA ligase, hydroxymethyl-, formyl-, and related transferase activities resulted in a decrease in the nitrogen metabolism-associated metabolic pathway, which might be related to inhibition of the production of biogenic amines. Overall, we highlight the response of metabolism to glucose stress and provide potential possibilities for the reduced formation of biogenic amines in improved level of sugar in the dairy fermentation industry. Moreover, according to the demand for industrial production, sugar concentration in fermented foods should be higher, or lower, than a set value that is dependent on bacterial strain and biogenic amine yield.

Investigating the Product Profiles and Structural Relationships of New Levansucrases with Conventional and Non-Conventional Substrates

The synthesis of complex oligosaccharides is desired for their potential as prebiotics, and their role in the pharmaceutical and food industry. Levansucrase (LS, EC 2.4.1.10), a fructosyl-transferase, can catalyze the synthesis of these compounds. LS acquires a fructosyl residue from a donor molecule and performs a non-Lenoir transfer to an acceptor molecule, via β-(2→6)-glycosidic linkages. Genome mining was used to uncover new LS enzymes with increased transfructosylating activity and wider acceptor promiscuity, with an initial screening revealing five LS enzymes. The product profiles and activities of these enzymes were examined after their incubation with sucrose. Alternate acceptor molecules were also incubated with the enzymes to study their consumption. LSs from Gluconobacter oxydans and Novosphingobium aromaticivorans synthesized fructooligosaccharides (FOSs) with up to 13 units in length. Alignment of their amino acid sequences and substrate docking with homology models identified structural elements causing differences in their product spectra. Raffinose, over sucrose, was the preferred donor molecule for the LS from Vibrio natriegens, N. aromaticivorans, and Paraburkolderia graminis. The LSs examined were found to have wide acceptor promiscuity, utilizing monosaccharides, disaccharides, and two alcohols to a high degree.

Correction: Sato, K., et al. Identification of a Novel Oligosaccharide in Maple Syrup as a Potential Alternative Saccharide for Diabetes Mellitus Patients. Int. J. Mol. Sci. 2019, 20, 5041

The authors wish to make the following corrections to this paper [...]

Recent advances in β-galactosidase and fructosyltransferase immobilization technology

The highly demanding conditions of industrial processes may lower the stability and affect the activity of enzymes used as biocatalysts. Enzyme immobilization emerged as an approach to promote stabilization and easy removal of enzymes for their reusability. The aim of this review is to go through the principal immobilization strategies addressed to achieve optimal industrial processes with special care on those reported for two types of enzymes: β-galactosidases and fructosyltransferases. The main methods used to immobilize these two enzymes are adsorption, entrapment, covalent coupling and cross-linking or aggregation (no support is used), all of them having pros and cons. Regarding the support, it should be cost-effective, assure the reusability and an easy recovery of the enzyme, increasing its stability and durability. The discussion provided showed that the type of enzyme, its origin, its purity, together with the type of immobilization method and the support will affect the performance during the enzymatic synthesis. Enzymes' immobilization involves interdisciplinary knowledge including enzymology, nanotechnology, molecular dynamics, cellular physiology and process design. The increasing availability of facilities has opened a variety of possibilities to define strategies to optimize the activity and re-usability of β-galactosidases and fructosyltransferases, but there is still great place for innovative developments.

Implications of the mutation S164A on Bacillus subtilis levansucrase product specificity and insights into protein interactions acting upon levan synthesis

Mutation S164A largely affects the transfructosylation properties of Bacillus subtilis levansucrase (SacB). The variant uses acceptors such as glucose and short levans with an average molecular weight of 7.6 kDa more efficiently than SacB, leading to the enhanced synthesis of medium and high molecular weight polymer and a blasto-oligosaccharide series with a polymerization degree of 2-10. A 3-fold increase in blasto-oligosaccharides yield is provoked by the modified interplay between the variant and glucose. Despite its modified product specificity, protein-carbohydrate and protein-protein interactions are still a major factor affecting size and distribution of levan molecular weight. This study highlights the importance of critical factors such as protein concentration in the analysis of wild-type and mutagenized levansucrases. Docking experiments with the crystal structures of SacB and variant S164A - the latter obtained at a 2.6 Å resolution - identified unreported potential binding subsites for fructosyl moieties on the surface of both enzymes.

Computational design of oligosaccharide producing levansucrase from Bacillus licheniformis RN-01 to improve its thermostability for production of levan-type fructooligosaccharides from sucrose

Levansucrase catalyzes production of levan and levan-type fructooligosaccharides (LFOs) with potential applications in food and pharmaceutical industries such as prebiotics and anti-tumor agents. Previous study found that Y246S mutant of Bacillus licheniformis RN-01 levansucrase (oligosaccharide producing levansucrase, OPL) could effectively produce LFOs but its thermostability is limited at high temperature. In this study, molecular dynamics (MD) and computational protein design were used to create mutants with higher thermostability than OPL by rigidifying highly flexible residues on enzyme surface. MD results show that highly flexible residues suitable for design are K82, N83, D179, and Q308. Two approaches were employed to improve their interactions by allowing them to be amino acids that could potentially form favorable interactions with their neighboring residues or natural amino acids except G, P and C. Flexibilities of designed residues of K82H, N83R, Q308S and K82H/N83R mutants are lower than those of OPL. Experimental results show that characteristics and product patterns of designed mutants are relatively similar to those of OPL. K82H/N83R mutant has higher thermostability than OPL with 1.7-fold increase in t_1/2. Circular dichroism result suggests that designed mutations do not drastically affect secondary structures. This study shows how computational technique can engineer enzyme for thermostability improvement.

The Structure of Sucrose-Soaked Levansucrase Crystals from Erwinia tasmaniensis reveals a Binding Pocket for Levanbiose

Given its potential role in the synthesis of novel prebiotics and applications in the pharmaceutical industry, a strong interest has developed in the enzyme levansucrase (LSC, EC 2.4.1.10). LSC catalyzes both the hydrolysis of sucrose (or sucroselike substrates) and the transfructosylation of a wide range of acceptors. LSC from the Gram-negative bacterium Erwinia tasmaniensis (EtLSC) is an interesting biocatalyst due to its high-yield production of fructooligosaccharides (FOSs). In order to learn more about the process of chain elongation, we obtained the crystal structure of EtLSC in complex with levanbiose (LBS). LBS is an FOS intermediate formed during the synthesis of longer-chain FOSs and levan. Analysis of the LBS binding pocket revealed that its structure was conserved in several related species. The binding pocket discovered in this crystal structure is an ideal target for future mutagenesis studies in order to understand its biological relevance and to engineer LSCs into tailored products.

A comprehensive study on levan nanoparticles formation: Kinetics and self-assembly modeling

Levan nanoparticles formation is a complicated phenomenon involving simultaneously polymeric reaction kinetics and nanoparticles self-assembly theory. These phenomena are studied in this work with experimental and computational methodologies. Specifically, the effect of different parameters on levan kinetics and nanoparticles production in a cell-free system environment have been studied. Results point out that 37 °C is the best temperature for synthesizing levan as well as the existence of a substrate inhibition effect for polymeric reaction. This work also highlights that raffinose can be used for producing and that an increase on the ratio enzyme-substrate increases the velocity of conversion. However, the previous experimental conditions did not produce an important effect on self-assembly formed levan nanoparticles (always 110 nm) as long as the required levan concentration (CAC) for nanoparticles reorganization is achieved. To have a better understanding of these results, a model was developed to explain numerically levan kinetics and nanoparticle self-assembly. This model was built by taking into account enzyme poisoning effect (also demonstrated experimentally) and a diffusion limited cluster model for the aggregation phenomenon. Simulation results fit properly experimental data and catalytic parameters as well as predicting accurately the value of CAC for producing its reorganization into nanoparticles by self-assembly.

A close look on the effect of polyethylene glycol on the levansucrase thermostability: a case study of Brenneria sp. levansucrase

BACKGROUND

To increase the low residual activity of levansucrase during long-time processing, an enhancement of its weak thermostability is needed. Here, the effect of metal ions and polyethylene glycol (PEG) on the thermostability of levansucrase from Brenneria sp. EniD312 were studied and evaluated. The residual activity was determined and the protein structure was evaluated by circular dichroism spectrum, fluorescence intensity (FI), and surface hydrophobicity (S₀ ).

RESULTS

As a result of incubation with 10% (w/v) PEG 4000, the enzyme activity was increased by 1.24-fold. After incubation with 5% PEG 4000 for 6 h, the residual activity at 35 and 45 °C was decreased to 55% and 60% of the initial activity, with an increase of 1.2- and 3.3-fold than the wild-type enzyme. Furthermore, the random coil content of enzyme was decreased from 53% of the wild-type enzyme to 33.9% of the PEG pre-incubated enzyme. Additionally, the FI was maximally increased and the S₀ was decreased from 117 to 69.

CONCLUSION

All of these results suggested that after incubation with PEG 4000, the secondary and tertiary structure of wild-type enzyme could be greatly maintained and then its thermostability could be increased. This study was the first report on the enhancement of levansucrase thermostability by PEG incubation and might be a good guideline to other researches on levansucrase. © 2019 Society of Chemical Industry.

Modified properties of alternan polymers arising from deletion of SH3-like motifs in Leuconostoc citreum ABK-1 alternansucrase

Alternansucrase (ALT, EC 2.4.1.140) catalyses the formation of an alternating 〈-1, 3/1, 6-linked glucan, with periodic branch points, from sucrose substrate. Beyond the catalytic domain, this enzyme harbours seven additional C-terminal SH3-like repeats. We herein generated two truncated alternansucrases, possessing deletions of three and seven adjacent SH3 motifs, giving Δ3SHALT and Δ7SHALT. Δ3SHALT and Δ7SHALT exhibited kcat/Km for transglycosylation activity 2.3- and 1.5-fold lower than wild-type ALT (WTALT), while hydrolysis was detected only in the truncated ALTs, oligosaccharide patterns and polymer glycosidic linkage were similar to that of WTALT. The viscosities of ALT polymers increase by ˜100-fold at 15% (w/v), with gel-like states formed at 12.5, 15.0, and 20.0% (w/v) produced by polymer from WTALT, Δ3SHALT, and Δ7SHALT, respectively. The average nanoparticle sizes of Δ3SHALT and Δ7SHALT polymers were 80 nm, compared to 90 nm from WTALT. In conclusion, even relatively subtle differences in the structure of ALT-produced alternan give rise to profound impact on the glucan polymer physicochemical properties.

6-SFT, a Protein from Leymus mollis, Positively Regulates Salinity Tolerance and Enhances Fructan Levels in Arabidopsis thaliana

Fructans play vital roles in abiotic stress tolerance in plants. In this study, we isolated the sucrose:6-fructosyltransferase gene, which is involved in the synthesis of fructans, from Leymus mollis by rapid amplification of cDNA ends. The Lm-6-SFT gene was introduced into Arabidopsis thaliana cv. Columbia by Agrobacterium-mediated transformation. The transgenic plants were evaluated under salt stress conditions. The results showed that the expression of Lm-6-SFT was significantly induced by light, abscisic acid (ABA), salicylic acid (SA), and salt treatment in L. mollis plants. Overexpression of Lm-6-SFT in Arabidopsis promoted seed germination and primary root growth during the early vegetative growth stage under salt stress. We also found that the transgenic plants expressing Lm-6-SFT had increased proline and fructan levels. β-Glucuronidase staining and promoter analysis indicated that the promoter of Lm-6-SFT was regulated by light, ABA, and salt stress. Quantitative PCR suggested that overexpression of Lm-6-SFT could improve salt tolerance by interacting with the expression of some salt stress tolerance genes. Thus, we demonstrated that the Lm-6-SFT gene is a candidate gene that potentially confers salt stress tolerance to plants. Our study will aid the elucidation of the regulatory mechanism of 6-SFT genes in herb plants.

Exploring the sequence variability of polymerization-involved residues in the production of levan- and inulin-type fructooligosaccharides with a levansucrase

The connection between the gut microbiome composition and human health has long been recognized, such that the host-microbiome interplay is at present the subject of the so-called “precision medicine”. Non-digestible fructooligosaccharides (FOS) can modulate the microbial composition and therefore their consumption occupies a central place in a strategy seeking to reverse microbiome-linked diseases. We created a small library of Bacillus megaterium levansucrase variants with focus on the synthesis of levan- and inulin-type FOS. Modifications were introduced at positions R370, K373 and F419, which are either part of the oligosaccharide elongation pathway or are located in the vicinity of residues that modulate polymerization. These amino acids were exchanged by residues of different characteristics, some of them being extremely low- or non-represented in enzymes of the levansucrase family (Glycoside Hydrolase 68, GH68). F419 seemed to play a minor role in FOS binding. However, changes at R370 abated the levansucrase capacity to synthesize levan-type oligosaccharides, with some mutations turning the product specificity towards neo-FOS and the inulin-like sugar 1-kestose. Although variants retaining the native R370 produced efficiently levan-type tri-, tetra- and pentasaccharides, their capacity to elongate these FOS was hampered by including the mutation K373H or K373L. Mutant K373H, for instance, generated 37- and 5.6-fold higher yields of 6-kestose and 6-nystose, respectively, than the wild-type enzyme, while maintaining a similar catalytic activity. The effect of mutations on the levansucrase product specificity is discussed.