99TcO4- remediation by a cationic polymeric network

Photocatalytic Reduction of Perrhenate and Pertechnetate in a Strongly Acidic Aqueous Solution

Pertechnetate (99TcO4-), a physiologically toxic radioactive anion, is of great concern due to its high mobility in environmental contamination remediation. Although the soluble oxyanion can be photoreduced to sparingly soluble TcO2·nH2O, its effective removal from a strongly acidic aqueous solution remains a challenge. Here, we found that low-crystalline nitrogen-doped titanium oxide (N-TiO2, 0.6 g L-1) could effectively uptake perrhenate (ReO4-, 10 mg L-1, a nonradioactive surrogate for TcO4-) with 50.8% during 360 min under simulated sunlight irradiation at pH 1.0, but P25 and anatase could not. The nitrogen active center formed by trace nitrogen doping in N-TiO2 can promote the separation and transfer of photogenerated carriers. The positive valence band value of N-TiO2 is slightly higher than those of P25 and anatase, which means that the photogenerated holes have a stronger oxidizability. These holes are involved in the formation of strong reducing •CO2- radicals from formic acid oxidation. The active radicals convert ReO4- to Re(VI), which is subsequently disproportionated to Re(IV) and Re(VII). Effective photocatalytic reduction/removal of Re(VII)/Tc(VII) is performed on the material, which may be considered a potential and convenient strategy for technetium decontamination and extraction in a strongly acidic aqueous solution.

Synthesis of metal-free benzimidazole-based catalysts and its application in CO2 cycloaddition

Ionic polymers functionalized with hydroxyl, carboxyl, and amino groups can enhance the catalytic activity of catalysts. However, the straightforward preparation of bifunctional ionic polymers containing abundant ionic active sites and hydrogen bond donors remains challenging. In this study, a series of porous ionic polymers (BZIs) containing different hydrogen bond donors (-NH2, -OH, -COOH) were prepared through a simple one-pot Friedel-Crafts alkylation using benzimidazole derivatives and benzyl bromide. The structures and properties of BZIs were characterized by various techniques such as Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, solid-state nuclear magnetic resonance, and scanning electron microscopy. Among the prepared catalysts (BZI-NH2, BZI-OH, and BZI-COOH), BZI-NH2 exhibited the highest catalytic activity and recyclability, achieving a yield of 97% in the CO2 cycloaddition. The synergistic effect of Br-, hydrogen bond donors (-NH-, -NH2), and N+ in BZI-NH2 was found to contribute to its superior catalytic performance. DFT calculations were employed to study the effect of hydrogen bonds, Br-, and N+ in BZI-NH2 and BZI-OH on the CO2 cycloaddition. Using BZI-NH2 as an example, a mechanism was proposed for the synergistic effect between amino groups and bromide ions in catalyzing the CO2 cycloaddition reaction.

Efficient removal of perrhenate/pertechnetate by a pyridinium-based porous polymer

The extraction of 99TcO4- from radioactive effluents is extremely crucial for the purposes of nuclear disposal and environmental remediation. Herein, utilizing a facile and low-cost synthesis method, we report a pyridinium-based cationic polymer network, CPP-Cl, with impressive adsorption performance and ultrafast adsorption kinetics towards ReO4-. The structure featuring highly density of charged pyridinium units was synthesized, making it an effective adsorbent for capturing ReO4-. The material showed fast ReO4- adsorption kinetics reaching adsorption equilibrium within 30 s, an excellent capture capability of 1069.7 mg/g, and exceptional separation efficiency of 94.3% for removing 1000 ppm ReO4-. Furthermore, it possessed excellent reusability in multiple sorption/desorption trials and good uptake capacity within a widely ranging pH values. It is noteworthy that the extraction efficiency of CPP-Cl for ReO4- from simulated nuclear waste can be up to 94.2%. The favorable performance of the material in multiple tests revealed that CPP-Cl has tremendous potential as a high-efficiency sorbent for capturing 99TcO4-/ReO4- in complex nuclear associated environmental systems.

Silver 2,4'-Bipyridine Coordination Polymer for the High-Capacity Trapping of Perrhenate, A Pertechnetate Surrogate

Pertechnetate, the most stable form of the radionuclide 99Tc in aerobic aqueous systems, is a hazardous anion present in nuclear waste. Its high mobility in water makes the remediation of the anion challenging. In the past decade, significant effort has been placed into finding materials capable of adsorbing this species. Here, we present the synthesis and high-resolution crystal structure of the coordination polymer [Ag(2,4'-bipyridine)]NO3, which is capable of sequestering perrhenate─a pertechnetate surrogate─through anion exchange to form another new coordination polymer, [Ag(2,4'-bipyridine)]ReO4. Both the beginning and end structures were solved by single-crystal X-ray diffraction and the adsorption reaction was monitored through inductively coupled plasma-optical emission spectroscopy and UV-vis spectroscopy. The exchange reaction follows a pseudo-second-order mechanism and the maximum adsorption capacity is 764 mg ReO4/g [Ag(2,4'-bipyridine)]NO3, one of the highest recorded for a coordination polymer or metal-organic framework. A solvent-mediated recrystallization mechanism was determined by monitoring the ion-exchange reaction by scanning electron microscopy-energy-dispersive spectroscopy and powder X-ray diffraction.

Creation of Cationic Polymeric Nanotrap Featuring High Anion Density and Exceptional Alkaline Stability for Highly Efficient Pertechnetate Removal from Nuclear Waste Streams

There is an urgent need for highly efficient sorbents capable of selectively removing 99TcO4- from concentrated alkaline nuclear wastes, which has long been a significant challenge. In this study, we present the design and synthesis of a high-performance adsorbent, CPN-3 (CPN denotes cationic polymeric nanotrap), which achieves excellent 99TcO4- capture under strong alkaline conditions by incorporating branched alkyl chains on the N3 position of imidazolium units and optimizing the framework anion density within the pores of a cationic polymeric nanotrap. CPN-3 features exceptional stability in harsh alkaline and radioactive environments as well as exhibits fast kinetics, high adsorption capacity, and outstanding selectivity with full reusability and great potential for the cost-effective removal of 99TcO4-/ReO4- from contaminated water. Notably, CPN-3 marks a record-high adsorption capacity of 1052 mg/g for ReO4- after treatment with 1 M NaOH aqueous solutions for 24 h and demonstrates a rapid removal rate for 99TcO4- from simulated Hanford and Savannah River Site waste streams. The mechanisms for the superior alkaline stability and 99TcO4- capture performances of CPN-3 are investigated through combined experimental and computational studies. This work suggests an alternative perspective for designing functional materials to address nuclear waste management.

Ultrafast and selective capture of 99TcO4-/ReO4- from wastewater by hyper-branched quaternary ammonium group-functionalized resin

99Tc primarily exists high mobility in the natural aqueous environment due to its extremely high solubility and non-complexing features, which can easily cause radioactive pollution. We herein report a general strategy for constructing a novel resin (SiPAN-PEI) with multiple positive charges nitrogen, exhibiting ultrafast adsorption kinetics (< 3 min), superior adsorption capacities (463.96 mg g-1), and excellent selectivity in the presence of excess competitive anions, which exceed those of most commercial resins. Moreover, based on impressive structure stability in extreme conditions, SiPAN-PEI can still maintain superior adsorption abilities after suffering irradiation, calcination, and immersion in strong acid. In addition, the separation performance kept excellently after five loading-washing-eluting cycles and the total adsorption ratio can still reach 97 %. Outstandingly, SiPAN-PEI can remove most of ReO4- from simulated nuclear wastewater through a sequential injection automatic separation system and can reduce the concentration of ReO4- to the maximum concentration standard set by the World Health Organization (WHO) in a short time. Leveraging density functional theory calculations and other characteristics clearly elucidated adsorption mechanism of anion-exchange between Cl- and TcO4-/ReO4-. In terms of superior adsorption property, SiPAN-PEI is demonstrated to be a pretty candidate for 99Tc elimination from wastewater.

Nanotrap Grafted Anionic MOF for Superior Uranium Extraction from Seawater

On-demand uranium extraction from seawater (UES) can mitigate growing sustainable energy needs, while high salinity and low concentration hinder its recovery. A novel anionic metal-organic framework (iMOF-1A) is demonstrated adorned with rare Lewis basic pyrazinic sites as uranyl-specific nanotrap serving as robust ion exchange material for selective uranium extraction, rendering its intrinsic ionic characteristics to minimize leaching. Ionic adsorbents sequestrate 99.8% of the uranium in 120 mins (from 20,000 ppb to 24 ppb) and adsorb large amounts of 1336.8 mg g-1 and 625.6 mg g-1 from uranium-spiked deionized water and artificial seawater, respectively, with high distribution coefficient, Kd U ≥ 0.97 × 106  mL g-1 . The material offers a very high enrichment index of ≈5754 and it achieves the UES standard of 6.0 mg g-1 in 16 days, and harvests 9.42 mg g-1 in 30 days from natural seawater. Isothermal titration calorimetry (ITC) studies quantify thermodynamic parameters, previously uncharted in uranium sorption experiments. Infrared nearfield nanospectroscopy (nano-FTIR) and tip-force microscopy (TFM) enable chemical and mechanical elucidation of host-guest interaction at atomic level in sub-micron crystals revealing extant capture events throughout the crystal rather than surface solely. Comprehensive experimentally guided computational studies reveal ultrahigh-selectivity for uranium from seawater, marking mechanistic insight.

Advanced porous materials and emerging technologies for radionuclides removal from Fukushima radioactive water

Japan recently announced the plan to discharge over 1.2 million tons of radioactive water into the Pacific Ocean, which contained hazardous radionuclides such as 60Co, 90Sr, 125Sb, 129I, 3H, 137Cs, and 99TcO4-, etc. The contaminated water will pose an enormous threat to global ecosystems and human health. Developing materials and technologies for efficient radionuclide removal is highly desirable and arduous because of the extreme conditions, including super acidity or alkalinity, high ionic strength, and strong ionizing radiation. Recently, advanced porous material, such as porous POPs, MOFs, COFs, PAFs, etc., has shown promise of improved separation of radionuclides due to their intrinsic structural advantages. Furthermore, emerging technologies applied to radionuclide removal have also been summarized. In order to better deal with radionuclide contamination, higher requirements for the design of nanomaterials and technologies applied to practical radionuclide removal are proposed. Finally, we call for comprehensive implementation of strategies and strengthened cooperation to mitigate the harm caused by radioactive contamination to oceans, atmosphere, soil, and human health.

Rapid and reliable assaying of Tc-99 in sediment samples with novel MTPN polymeric resin

The paper describes a new method for the rapid determination of Technetium (Tc) in sediment samples using solid-phase extraction chromatography (SPEC) with a novel methyl triphenyl phosphoniumnitrate (MTPN) resin. The effectiveness of the resin in selectively recovering Tc was evaluated in both batch and column mode and exploited for rapid analysis of 'Tc'. The procedure involves the acid digestion of samples, pre-concentration of fission products in supernatant and co-precipitation of actinides with Fe(OH)3, followed by selective recovery of Tc by SPEC using a column filled with MTPN resin. The recovered Tc was then radiometrically assayed using beta counting. The method was validated using IAEA certified reference materials and was found to provide reliable and reproducible results for the activity concentration of Tc-99 in sediment samples within 24 h.

Neutral MOF Anion Receptor: Radical-Promoted Precise Anion Recognition

Precise ion recognition plays a key role in the anionic decontamination in water. However, the established anionic recognition based on neutral or cationic anion receptor is still restricted by the inherent limitation, such as narrow application scope in organic solvent rather than water for neutral anion receptor and poor selectivity due to non-directional electrostatic interaction for cationic anion receptor. Herein, for the first time, a neutral metal-organic framework (MOF) anion receptor is shown, enabling precise anion recognition, for example, the presence of a variety of 1000-fold competitive anions does not affect the selective adsorption of the target anion at all. A radical-dominating anion-recognition mechanism is proposed for rationalizing the efficacy of the neutral MOF.

Post-Modification of a Robust Covalent Organic Framework for Efficient Sequestration of 99 TcO4 - /ReO4. Chemistry 2023;29:e202302168. [PMID: 37534580 DOI: 10.1002/chem.202302168] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

Nuclear industry spent fuel reprocessing and some radioactive contamination sites often involve high acidity and salinity environments. Currently developed and reported sorbents in 99 TcO4 - sequestration from the nuclear waste are unstable and show low adsorption efficiency in harsh conditions. To address this issue, we developed a post-synthetic modification strategy by grafting imidazole-based ionic liquids (ILs) onto the backbone of covalent organic framework (COF) via vinyl polymerization. The resultant COF-polyILs sorbent exhibits fast adsorption kinetics (<5 min) and good sorption capacity (388 mg g-1 ) for ReO4 - (a nonradioactive surrogate of 99 TcO4 - ). Outstandingly, COF-polyILs composite shows superior ReO4 - removal even under highly acidic conditions and in the presence of excess competing ions of Hanford low-level radioactive waste stream, benefiting from the stable covalent bonds between the COF and polyILs, mass of imidazole rings, and hydrophobic pores in COF.

Porous organic polymers (POPs) for environmental remediation

Modern global industrialization along with the ever-increasing growth of the population has resulted in continuous enhancement in the discharge and accumulation of various toxic and hazardous chemicals in the environment. These harmful pollutants, including toxic gases, inorganic heavy metal ions, anthropogenic waste, persistent organic pollutants, toxic dyes, pharmaceuticals, volatile organic compounds, etc., are destroying the ecological balance of the environment. Therefore, systematic monitoring and effective remediation of these toxic pollutants either by adsorptive removal or by catalytic degradation are of great significance. From this viewpoint, porous organic polymers (POPs), being two- or three-dimensional polymeric materials, constructed from small organic molecules connected with rigid covalent bonds have come forth as a promising platform toward various leading applications, especially for efficient environmental remediation. Their unique chemical and structural features including high stability, tunable pore functionalization, and large surface area have boosted the transformation of POPs into various macro-physical forms such as thick and thin-film membranes, which led to a new direction in advanced level pollutant removal, separation and catalytic degradation. In this review, our focus is to highlight the recent progress and achievements in the strategic design, synthesis, architectural-engineering and applications of POPs and their composite materials toward environmental remediation. Several strategies to improve the adsorption efficiency and catalytic degradation performance along with the in-depth interaction mechanism of POP-based materials have been systematically summarized. In addition, evolution of POPs from regular powder form application to rapid and more efficient size and chemo-selective, "real-time" applicable membrane-based application has been further highlighted. Finally, we put forward our perspective on the challenges and opportunities of these materials toward real-world implementation and future prospects in next generation remediation technology.

Repurposing of steel rolling sludge: Solvent-free preparation of α-Fe2O3 nanoparticles and its application for As(III/V)-containing wastewater treatment

Steel rolling sludge (SRS) is the by-product of metallurgical industry with abundant iron content, which needs to be utilized for producing high value-added products. Herein, cost-effective and highly adsorbent α-Fe₂O₃ nanoparticles were prepared from SRS via a novel solvent-free method and applied to treat As(III/V)-containing wastewater. The structure of the prepared nanoparticles was observed to be spherical with a small crystal size (12.58 nm) and high specific surface area (145.03 m²/g). The nucleation mechanism of α-Fe₂O₃ nanoparticles and the effect of crystal water were investigated. More importantly, compared with the traditional methods of preparation cost and yield, this study was found to have excellent economic benefits. The adsorption results indicated that the adsorbent could effectively remove arsenic over a wide pH range, and the optimal performance of nano adsorbent for As(III) and As(V) removal was observed at pH 4.0-9.0 and 2.0-4.0, respectively. The adsorption process was consistent with pseudo-second-order kinetic and Langmuir isothermal model. The maximum adsorption capacity (q_m) of adsorbent for As(III) and As(V) was 75.67 mg/g and 56.07 mg/g, respectively. Furthermore, α-Fe₂O₃ nanoparticles exhibited great stability, and q_m remained at 64.43 mg/g and 42.39 mg/g after five cycles. Particularly, the As(III) was removed by forming inner-sphere complexes with the adsorbent, and it partially oxidized to As(V) during this process. In contrast, the As(V) was removed by electrostatic adsorption and reaction with -OH on the adsorbent surface. Overall, resource utilization of SRS and the treatment of As(III)/(V)-containing wastewater in this study are in line with the current developments in the environmental and waste-to-value research.

Superiority of the Supramolecular Halogen Bond Receptor over Its H-Bond Analogue toward the Efficient Extraction of Perrhenate from Water

A halogen bond-based water-soluble tetrapodal iodoimidazolium receptor, (L-I)(4Br), exhibited a high degree of efficiency (∼96%) in extracting ReO₄^- from 100% aqueous medium within a wide range of concentrations and of pH values along with excellent reusability. The solid-state X-ray diffraction study showed the trapping of ReO₄^- by (L-I)(4Br) via the Re-O····I halogen bonding interaction. XPS studies also suggested the interaction between I and ReO₄^- through polarization of the electron density of I atoms by ReO₄^-. (L-I)(4Br) is found to be capable of retaining its high extraction efficiency in the presence of competing anions such as F^-, Cl^-, I^-, SO₄^2-, H₂PO₄^-, CO₃^2-, NO₃^-, BF₄^-, ClO₄^-, Cr₂O₇^2-, and a mixture of these anions. Interestingly, (L-I)(4Br) was found to be superior in ReO₄^- extraction as compared to its hydrogen-bond donor analogue, (L-H)(4Br), as confirmed by a series of control experiments and theoretical calculations. Our synthesized dipodal and tripodal halogen bond donor receptors and their H-analogues validated the superiority of these classes of supramolecular halogen bond donor receptors over their hydrogen-bond analogues. (L-I)(4Br) also showed superior practical applicability in terms of the removal of ReO₄^- at anion concentrations as low as ∼100 ppm, which was a major shortcoming of (L-H)(4Br).

CTAB assisted evaporation-induced self-assembly to construct imidazolium-based hierarchical porous covalent organic polymers for ReO4-/TcO4- removal

Evaporation-induced self-assembly method (EISA) was a facile and reliable method to synthesize porous materials. Herein, we report a kind of hierarchical porous ionic liquid covalent organic polymers (HPnDNH₂) under cetyltrimethylammonium bromide (CTAB) assisted by EISA for ReO₄^-/TcO₄^- removal. Unlike covalent organic frameworks (COFs), which usually needed to be prepared in a closed environment or with a long reaction time, HPnDNH₂ in this study was prepared within 1 h in an open environment. It was worth noting that CTAB not only served as a soft template for forming pore, but also induced ordered structure, which was verified by SEM, TEM, and Gas sorption. Benefit from its hierarchical pore structure, HPnDNH₂ exhibited higher adsorption capacity (690.0 mg g^-1 for HP1DNH₂ and 808.7 mg g^-1 for HP1.5DNH₂) and faster kinetics for ReO₄^-/TcO₄^- than 1DNH₂ (without employing CTAB). Additionally, the material used to remove TcO₄^- from alkaline nuclear waste was seldom reported, because combining features of alkali resistance and high uptake selectivity was not easy to achieve. In this study, in the case of HP1DNH₂, it displayed outstanding adsorption efficiency toward aqueous ReO₄^-/TcO₄^- in 1 mol L^-1 NaOH solution (92%) and simulated Savannah River Site High-level waste (SRS HLW) melter recycle stream (98%), which could be a potentially excellent nuclear waste adsorbing material.

Design and Application of Materials for Sequestration and Immobilization of 99Tc

⁹⁹Technetium (⁹⁹Tc) is a hazardous radionuclide that poses a serious environmental threat. The wide variation and complex chemistries of liquid nuclear waste streams containing ⁹⁹Tc often create unique, site specific challenges when sequestering and immobilizing the waste in a matrix suitable for long-term storage and disposal. Therefore, an effective management plan for ⁹⁹Tc containing liquid radioactive wastes (such as storage (tanks) and decommissioned wastes) will likely require a variety of suitable materials/matrixes capable of adapting to and addressing these challenges. In this review, we discuss and highlight the key developments for effective removal and immobilization of ⁹⁹Tc liquid waste in inorganic waste forms. Specifically, we review the synthesis, characterization, and application of materials for the targeted removal of ⁹⁹Tc from (simulated) waste solutions under various experimental conditions. These materials include (i) layered double hydroxides (LDHs), (ii) metal-organic frameworks (MOFs), (iii) ion-exchange resins (IERs) as well as cationic organic polymers (COPs), (iv) surface modified natural clay materials (SMCMs), and (v) graphene-based materials (GBMs). Second, we discuss some of the major and recent developments toward ⁹⁹Tc immobilization in (i) glass, (ii) cement, and (iii) iron mineral waste forms. Finally, we present future challenges that need to be addressed for the design, synthesis, and selection of suitable matrixes for the efficient sequestration and immobilization of ⁹⁹Tc from targeted wastes. The purpose of this review is to inspire research on the design and application of various suitable materials/matrixes for selective removal of ⁹⁹Tc present globally in different radioactive wastes and its immobilization in stable/durable waste forms.

Ultra-stable 3D pyridinium salt-based polymeric network nanotrap for selective 99TcO4-/ReO4- capture via hydrophobic and steric engineering

Selective capture of radioactive ⁹⁹TcO₄^- from highly alkaline nuclear waste is highly desirable for environmental remediation and waste disposal. However, the combined features of adsorbents with excellent chemical stability and high capture selectivity for ⁹⁹TcO₄^- have not yet been achieved. Herein, we report an ultra-stable 3D pyridinium salt-based polymeric network (TMP-TBPM) nanotrap with remarkable radiation, acid and base stability for selective capture of ReO₄^- via hydrophobic engineering and steric hindrance, a non-radioactive surrogate of ⁹⁹TcO₄^-. The batch capture experiments show that TMP-TBPM has high capture capacity (918.7 mg g^-1) and fast sorption kinetics (94.3 % removal in 2 min), which can be attributed to the high density of pyridinium salt-based units on the highly accessible pore channels of 3D interconnected low-density skeleton. In addition, the introduction of abundant alkyl and tetraphenylmethane units into the 3D framework not only greatly enhanced the hydrophobicity and stability of TMP-TBPM, but also significantly improved the affinity toward ⁹⁹TcO₄^-/ReO₄^-, enabling reversible and selective capture of ⁹⁹TcO₄^-/ReO₄^- even under highly alkaline conditions. This study exhibits the great potential of 3D pyridinium salt-based polymeric network nanotrap for ⁹⁹TcO₄^-/ReO₄^- capture from highly alkaline nuclear waste, providing a new strategy to construct high-performance cationic polymeric sorbents for radioactive wastewater treatment.

Porous Materials for Water Purification

Water pollution is a growing threat to humanity due to the pervasiveness of contaminants in water bodies. Significant efforts have been made to separate these hazardous components to purify polluted water through various methods. However, conventional remediation methods suffer from limitations such as low uptake capacity or selectivity, and current water quality standards cannot be met. Recently, advanced porous materials (APMs) have shown promise in improved segregation of contaminants compared to traditional porous materials in uptake capacity and selectivity. These materials feature merits of high surface area and versatile functionality, rendering them ideal platforms for the design of novel adsorbents. This Review summarizes the development and employment of APMs in a variety of water treatments accompanied by assessments of task-specific adsorption performance. Finally, we discuss our perspectives on future opportunities for APMs in water purification.

Ultrafast and selective separation of 99mTc from molybdenum matrix using DBDGA deliberately tailored macrocyclic crown-ethers

Technetium-99m (^99mTc) is an important medical radionuclide. Due to the crisis in supply of molybdenum-99 (⁹⁹Mo), production of ^99mTc directly via the ¹⁰⁰Mo (p, 2 n) reaction by cyclotron was proposed. In this process, the most critical challenge is to rapidly and efficiently separate ^99mTc from high concentration of molybdenum. In this work, a novel ligand, bis(N,N-dibutyldiglycolamide)dibenzo-18-crown-6 (BisDBDGA-DB18C6) was successfully synthesized and used for extraction of TcO₄^- /ReO₄^- from molybdenum. The results demonstrated that BisDBDGA-DB18C6 expressed excellent selectivity for TcO₄^- with a high separation factor of 1.6 × 10⁵ against Mo, a fast extraction kinetic (within 45 s), and a high extraction capacity of 211 mmol ReO₄^- (⁹⁹TcO₄^-)/per mole of extractant. The extraction mechanism was proposed as a co-interaction of macrocyclic crown ether and N,N-dibutyldiglycolamide group through slope analysis, FT-IR, ESI-MS, ¹H NMR titration and theory calculations. Importantly, ⁹⁹Tc in the organic phase can be quantitatively (> 99%) and easily back-extracted using deionized water, which can be directly used for medical applications.

Synthesis of cationic polymer decorated with halogen for highly efficient trapping 99TcO4-/ReO4. JOURNAL OF HAZARDOUS MATERIALS 2023;443:130325. [PMID: 36372023 DOI: 10.1016/j.jhazmat.2022.130325]

The elimination of anion is of great importance from radioactive nuclear waste containing ⁹⁹TcO₄^- by rationally designing anion-scavenging materials with high density of charge and more accessible adsorption sites. Herein, a tailor-made cationic organic polymer with donor-acceptor (D-A) structure, namely TrDCPN, was successfully synthesized by rationally modifying the benzimidazole unit for efficient trapping the perrhenate (ReO₄^-) as a ⁹⁹Tc surrogate. Systematic control of the skeleton affect enables the material to integrate a variety of features, surmounting the long-term challenge of ⁹⁹TcO₄^-/ReO₄^- remediation under extreme conditions of high acid/base and high ionic strength. Furthermore, the TrDCPN shows excellent affinity toward ReO₄^- in the existence of large excess of competitive anions (SO₄^2-, NO₃^- and PO₄^3-etc.) as well as promising reusability for trapping ReO₄^-. The excellent stability and separation were derived from the introduction of large conjugated modules, triazine core and hydrophobic. More importantly, the synthetic cationic organic polymer with D-A feature was first proved that the introduction of halogen can effectively enhance the backbone charge, and increase the adsorption capacity by synergy of ion exchange, electrostatic interaction and δ hole-anion interaction. The adsorption capacity of TrDCPN can be up to 420.3 mg/g and reach equilibrium within 20 min. It is noteworthy that TrDCPN successfully immobilizes ReO₄^- from simulated Hanford waste with a high separation efficiency of 93 %, providing a new paradigm for material design to dispose of the problem of radioactive pollutants in the environment.

Ultraselective Extraction Reprocessing of 99TcO4-/ReO4- with a Promising Carbamic Acid Extractant System

With the development of nuclear energy, the reprocessing of ⁹⁹TcO₄^-/ReO₄^- has become a very difficult problem due to environmental issues such as high output, long life, and easy leakage. In this study, three extraction systems containing carbamic acid were introduced into the reprocessing of ⁹⁹TcO₄^-/ReO₄^- for the first time. The results involving one of the three results show that N-[N,N-di(2-ethylhexyl) aminocarbonylmethyl] glycine (D2EHAG) has ultrahigh selectivity for removal to ⁹⁹TcO₄^-/ReO₄^-. When the extreme concentration ratio of SO₄^2- and Cl^- to ReO₄^- of D2EHAG is 10,000:1, the distribution coefficient of ReO₄^- still reaches 12.73 and 2.67, respectively. Additionally, the most hydrophilic NO₃^-, when the extreme concentration ratio of NO₃^- and ReO₄^- is 1000:1, still has a distribution coefficient close to 2.33, which is more than the most reported MOF adsorption materials. Moreover, the reaction kinetics, stripping rate, and reuse rate were studied. After five cycles, the removal rate is still 98.12%, with a decrease of less than 0.7%. The system containing carbamic acid is a potential extraction removal system to remove ⁹⁹TcO₄^-/ReO₄^- from nuclear radioactive wastewater.

Selective Chromium(VI) Trapping by an Acetate-Releasing Coordination Polymer

We report the high-capacity and selective uptake of Cr(VI) from water using the coordination polymer silver bipyridine acetate (SBA, [Ag(4,4'-bipy)][CH₃CO₂]·3H₂O). Cr capture involves the release of acetate, and we have structurally characterized two of the product phases that form: silver bipyridine chromate (SBC, SLUG-56, [Ag(4,4'-bipy)][CrO₄]_0.5·3.5H₂O) and silver bipyridine dichromate (SBDC, SLUG-57, [Ag(4,4'-bipy)][Cr₂O₇]_0.5·H₂O). SBA maintains a high Cr uptake capacity over a wide range of pH values (2-10), reaching a maximum of 143 mg Cr/g at pH 4. This Cr uptake capacity is one of the highest among coordination polymers. SBA offers the additional benefits of a one-step, room temperature, aqueous synthesis and its release of a non-toxic anion following Cr(VI) capture, acetate. Furthermore, SBA capture of Cr(VI) remains >97% in the presence of a 50-fold molar excess of sulfate, nitrate, or carbonate. We also investigated the Cr(VI) sequestration abilities of silver 1,2-bis(4-pyridyl)ethane nitrate (SEN, [Ag(4,4'-bpe)][NO₃]) and structurally characterized the silver 1,2-bis(4-pyridyl)ethane chromate (SEC, SLUG-58, [Ag(4,4'-bpe)][CrO₄]_0.5) product. SEN was, however, a less effective Cr(VI) sequestering material than SBA.

Fabricating Industry-Compatible Olefin-Linked COF Resins for Oxoanion Pollutant Scavenging

Large-scale and low-cost synthesis of covalent organic frameworks (COFs) to meet the demands of industrial application remains formidably challenge. Here we report using 2,4,6-collidine as monomer to produce a series of highly crystalline olefin-linked COFs by a melt polymerization method. This method enables the kilogram-scale fabrication of self-shaped monolithic robust foams. The afforded COFs possess extremely low cost (<50 USD/kg), superior to all the reported COFs. Furthermore, using one-pot or post-modification methods can conveniently transform neutral COFs to ionic COFs, which can be applied as highly efficient ion-exchange sorbents for scavenging oxoanion pollutants. Remarkably, the superior adsorption capacity of a model oxoanion (ReO₄ ^- ) is the highest among crystalline porous materials reported so far. This work not only expands the scopes of olefin-linked COFs but also enlightens the route for the industrial production of crystalline ion exchange sorbents.

Twofold Interpenetrated Cationic Metal-Organic Framework with Hydrophobic Channels for Effectively Trapping Toxic Oxo-Anions

Sequestration of toxic oxo-anions (such as ⁹⁹TcO₄^- and ClO₄^-) from wastewater has received constant attention due to the existing serious threat to public health and the sustainability of the environment. In view of the low energy of hydration of TcO₄^- and ClO₄^-, cationic metal-organic framework (MOF) materials with the hydrophobic microenvironment are preferred in the selection of sorbents. Herein, a twofold interpenetrated cationic MOF (ZJU-X15) with double-helical chains was constructed by tetrakis[4-(pyridin-4-yl)phenyl]ethene (TPPE) and Cd²⁺ for the elimination of ⁹⁹TcO₄^- and ClO₄^-. Profiting from hydrophobic channels, ZJU-X15 could remove most of ReO₄^- (a surrogate for ⁹⁹TcO₄^-) and ClO₄^- in less than 10 and 20 min, respectively. As the result of batch experiments, ZJU-X15 could capture 356 mg of ReO₄^- and 221 mg of ClO₄^- per 1 g of sorbent, showcase decent selectivity, and still maintain high removal efficiency for anions after four recycles. Furthermore, the process of anion-exchange was confirmed by ion chromatography, Fourier-transform infrared spectroscopy, scanning electron microscopy combined with an energy-dispersive X-ray spectrometer, and X-ray photoelectron spectroscopy, indicating that target anions successfully entered into the body of ZJU-X15 through anion exchange.

An ionic vinylene-linked three-dimensional covalent organic framework for selective and efficient trapping of ReO4- or 99TcO4. Nat Commun 2022;13:7621. [PMID: 36494388 PMCID: PMC9734744 DOI: 10.1038/s41467-022-35435-7]

The synthesis of ionic olefin linked three-dimensional covalent organic frameworks (3D COFs) is greatly challenging given the hardness of the formation of stable carbon-carbon double bonds (-C = C-). Herein, we report a general strategy for designing porous positively charged sp² carbon-linked 3D COFs through the Aldol condensation promoted by quaternization. The obtained 3D COFs, namely TFPM-PZI and TAPM-PZI, showed impressive chemical stability. Furthermore, the positively charged frameworks with regular porosity endow 3D ionic COFs with selective capture radioactive ReO₄^-/TcO₄^- and great removal efficiency in simulated Hanford waste. This research not only broadens the category of 3D COFs but also promotes the application of COFs as efficient functional materials.

An alkali-resistant metal-organic framework as halogen bond donor for efficient and selective removing of ReO4-/TcO4. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2022;29:86815-86824. [PMID: 35794336 DOI: 10.1007/s11356-022-21870-y] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

⁹⁹Tc is one of the most problematic nuclear fuel products due to its long half-life and high environmental mobility. Direct removal of TcO₄^- from the highly alkaline solution of nuclear fuel is a serious and challenging environmental issue. In this work, the first efficient synthetic approach introducing halogens into a two-dimensional metal-organic framework, named Mn-MOF, is established using MnCl₂·4H₂O coordinating with neutral nitrogen-donor ligand, showing ultrahigh stability in alkaline aqueous even under 1 M NaOH. The luxuriant Mn-Cl bonds and ordered hydrophobic pore channels enable the Mn-MOF to have an efficient adsorption capacity for ReO₄^- with a large capacity (403 mg g^-1), which is higher than most MOF adsorbents. More importantly, the Mn-MOF shows an excellent selectivity toward ReO₄^- in high-density competitive anions, such as NO₃^- and SO₄^2-. Moreover, the outstanding performance of Mn-MOF in removing ReO₄^- endowed it successfully separated ReO₄^- from the simulated Savannah River Site (SRS) high-level waste (HLW) stream with high removal of 66.84% at the phase ratio of 10. The adsorption mechanism is further demonstrated by FT-IR, XPS analysis, and DFT calculation, showing that the ReO₄^- can selectively interact with Mn-Cl bonds and imidazole groups, forming unique halogen bonds Cl-O-Re, and a series of hydrogen bonds, respectively. This work suggests a new approach to the removal of TcO₄^- from nuclear fuel.

Highly Selective Adsorption of 99TcO4-/ReO4- by a Novel Polyamide-Functionalized Polyacrylamide Polymer Material

The treatment of radioactive wastewater is one of the major problems in the current research. With the development of nuclear energy, the efficient removal of ⁹⁹TcO₄^- in radioactive wastewater has attracted the attention of countries all over the world. In this study, a novel functional polyamide polymer p-(Amide)-PAM was synthesized by the two-step method. The experimental results show that p-(Amide)-PAM has good adsorptive properties for ⁹⁹TcO₄^-/ReO₄^- and has good selectivity in the nitric acid system. The kinetics of the reaction of p-(Amide)-PAM with ⁹⁹TcO₄^-/ReO₄^- was studied. The results show that p-(Amide)-PAM has a fast adsorption rate for ⁹⁹TcO₄^-/ReO₄^-, the saturated adsorption capacity reaches 346.02 mg/g, and the material has good reusability. This new polyamide-functionalized polyacrylamide polymer material has good application prospects in the removal of ⁹⁹TcO₄^- from radioactive wastewater.

3D Ionic Olefin-Linked Conjugated Microporous Polymers for Selective Detection and Removal of TcO4-/ReO4- from Wastewater

Technetium (⁹⁹Tc) is a highly toxic radioactive nuclear wastewater contaminant. Real-time detection of ⁹⁹Tc is very difficult due to its difficult-to-complex nature. Herein, a novel three-dimensional ionic olefin-linked conjugated microporous polymer (TFPM-EP-Br) is constructed using tetrakis(4-aldehyde phenyl)methane (TFPM) as the central monomer. The unique cationic cavity and highly hydrophobic framework enable TFPM-EP-Br to act as a fluorescent sensor for TcO₄^-. The fluorophores of TFPM-EP-Br can be quenched due to electron transfer from TFPM-EP-Br to TcO₄^- and the formation of strongly nonfluorescent complexes. Meanwhile, the regular pore channels are beneficial for the fast mass transfer of TcO₄^-, resulting in an ultrafast response time (less than 2 s) with an ultralow detection limit (33.3 nM). In addition, the ultrahigh specific surface area enables TFPM-EP-Br to combine the ability to synergistically detect and remove radioactive ⁹⁹Tc. From this perspective, the novel conjugated microporous polymer has made a breakthrough in the detection and extraction of radioactive contaminants.

Two-Fold Interlocking Cationic Metal-Organic Framework Material with Exchangeable Chloride for Perrhenate/Pertechnetate Sorption

Albeit reported substantial sorbents for elimination of TcO₄^-, the issue of secondary contamination caused by released counterions (such as NO₃^-) from the cationic metal-organic framework (MOF) has not come into the sufficient limelight for researchers. Herein, our efforts are dedicated to settle the matter through synthesis of NiCl₂ based on the cationic MOF (ZJU-X4). Less harmful chlorides are used as exchangeable anions for replacing hazardous anions. Notably, ZJU-X4 exhibited fast sorption kinetics, high sorption capacity of 395 mg/g, decent selectivity, and excellent reusability in four recycles. The results of ion chromatography revealed that the released chloride ion was equal to sorption of target ions, and pair distribution functions were employed to analyze the changes in ZJU-X4 after sorption of ReO₄^-, clearly elucidating the anion-exchange mechanism. Furthermore, in the dynamic sorption experiments, ReO₄^- could be facilely and effectively removed and recovered, showing the value of practical applications. This work indicated that cationic MOF-based metal chloride salts would be a better choice for anionic sorbents.

A Novel Functionalized Ionic Liquid for Highly Selective Extraction of TcO4. Inorg Chem 2022;61:10609-10617. [PMID: 35758888 DOI: 10.1021/acs.inorgchem.2c01775]

Due to the highly acidic and high-salinity nature of the high-level radioactive waste liquid (HLLW), selective extraction of TcO₄^- from HLLW remains to be a challenging task. Traditional anion exchangers show low selectivity and unsatisfactory extraction performance due to the lack of functional groups that can interact strongly with TcO₄^-. In this work, a tailor-made binding site was constructed by decorating two acetamide functional groups on imidazolium cation to fabricate a new Tc separation material, which exhibits high selectivity. Unlike most reported Tc separation materials, which can only perform well under low acidic, neutral, or alkaline conditions, this material still has good extraction performance in highly acidic solutions. In the simulated high-level waste liquid of 3 M nitric acid, the extraction efficiency of 0.5 mol/L organic phase for Tc can reach 96.5% through the first-stage extraction. Our theoretical simulations suggest that ReO₄^-/TcO₄^- anions were adsorbed on the top of the imidazolium ring during the extraction process, with p-π and p-p interactions acting as the driving forces.

Pyridinium salt-based covalent organic framework with well-defined nanochannels for efficient and selective capture of aqueous 99TcO4. Sci Bull (Beijing) 2022;67:924-932. [PMID: 36546027 DOI: 10.1016/j.scib.2022.02.012]

Ionic covalent organic framework (COF) materials with high specific surface areas and well-defined pore structures are desired for many applications yet seldom reported. Herein, we report a cationic pyridinium salt-based COF (PS-COF-1) with a Brunauer-Emmett-Teller (BET) surface area of 2703 m2 g-1, state-of-the-art for an ionic COF. Aided by its ordered pore structure, chemical stability, and radiation resistance, PS-COF-1 showed exceptional adsorption properties toward aqueous ReO4- (1262 mg g-1) and 99TcO4-. Its adsorption performance surpassed its corresponding amorphous analogue. Importantly, PS-COF-1 exhibited fast adsorption kinetics, high adsorption capacities, and selectivity for 99TcO4- and ReO4- at high ionic strengths, leading to the successful removal of 99TcO4- under conditions relevant to low-activity waste streams at US legacy Hanford nuclear sites. In addition, PS-COF-1 can rapidly decontaminate ReO4-/99TcO4- polluted potable water (∼10 ppb) to drinking water level (0 ppb, part per billion) within 10 min. Density functional theory (DFT) calculations revealed PS-COF-1 has a strong affinity for ReO4- and 99TcO4-, thereby favoring adsorption of these low charge density anions over other common anions (e.g., Cl-, NO3-, SO42-, CO32-). Our work demonstrates a novel cationic COF sorbent for selective radionuclide capture and legacy nuclear waste management.

Rational Design of High-Performance Cationic Organic Network Adsorbents

Development of high-performance ionic organic network (ION) adsorbents is of great importance for water remediation. However, the research on IONs is still nascent, especially, the design philosophy regarding contaminant adsorption has rarely been explored. In this contribution, we optimized the adsorption efficiency of IONs by increasing the density of charged sites and improving their accessibility. We first produced a new cationic organic network (CON), CON-LDU4, with a high density of positive sites via synthesis from tetra(4-pyridyl)ethene. Compared to the analogue CON-LDU2 that synthesized from tetra(4-(4-pyridyl)phenyl)ethene, CON-LDU4 exhibited higher efficiency in adsorption of methyl blue, indicating that the higher ionic density results in the higher adsorption efficiency. To further improve the accessibility of the active sites, another new CON material (CON-LDU5) was synthesized by employing a hard template. CON-LDU5 exhibited a larger specific surface area than CON-LDU4, with clearly enhanced adsorption efficiency. Finally, CON-LDU5 was used to capture CrO42- ions in water with fast adsorption kinetics (k2 = 0.0328 g mg-1 min-1) and high adsorption capacity (369 mg g-1).

Covalent organic frameworks functionalized electrodes for simultaneous removal of UO22+ and ReO4- with fast kinetics and high capacities by electro-adsorption

The recovery of radioactive ions from high salinity low-level radioactive wastewater (LLRW) is important for the sustainable utilization of nuclear energy. Previous work primarily focuses on developing adsorbents that remove individual types of ions via physicochemical adsorption. Here, we report a new strategy for the simultaneous recovery of uranium (UO₂²⁺) and rhenium (ReO₄^-) as a non-radioactive surrogate of technetium from LLRW via electro-adsorption. Carboxyl functionalized covalent organic frameworks (COF-1) and cationic covalent organic frameworks (COF-2) were prepared as cathode and anode materials, respectively. The adsorption capacities were 411 mg U/g for COF-1 and 984 mg Re/g for COF-2 under 1.2 direct-current (DC) volts, 2.5 and 2.1 times higher than the capacities of the same adsorbents obtained by physicochemical adsorption. We also found that the electro-adsorption of uranium and rhenium follows pseudo-second-order kinetics with the adsorption rates of 0.45 and 1.05 g/mg/h at pH 7.0 and 298.15 K, again two times faster than those measured in physicochemical adsorption. Therefore, electro-adsorption improves both adsorption capacity and kinetics by maximizing the utility of available active sites in adsorbents and facilitating ion migration towards the adsorbents. The adsorption efficiencies for uranium and rhenium reached 65.9% and 89.2%, respectively, after electro-adsorption for 2 h. The high efficiencies can be maintained after five adsorption-desorption cycles. Furthermore, the electrodes showed high selectivity for uranium(VI) and rhenium(VII) and excellent salt resistance even in 1 mol/L NaCl solution. XPS studies revealed that covalent bonds were formed between uranium(VI) and carboxyl groups on COF-1, and rhenium(VII) was bound to cationic COF-2 through electrostatic interaction. Our asymmetric electrodes design can be extended to simultaneously and efficiently remove other types of radioactive or heavy metal ions from wastewater.

Unveiling the Impact of Diverse Morphology of Ionic Porous Organic Polymers with Mechanistic Insight on the Ultrafast and Selective Removal of Toxic Pollutants from Water

In recent years, detoxification of contaminated water by different types of materials has received a great deal of attention. However, lack of methodical in-depth understanding of the role of various physical properties of such materials toward improved sorption performance limits their applicable efficiencies. In perspective, decontamination of oxoanion-polluted water by porous materials with different morphologies are unexplored due to a shortfall of proper synthetic strategies. Herein, systematic optimization of sequestration performance toward efficient decontamination of toxic oxoanion-polluted water has been demonstrated by varying the morphologies of an imidazolium-based cationic polymeric network [ionic porous organic polymers (iPOP-5)]. Detailed morphological evolution showed that the chemically stable ionic polymer exhibited several morphologies such as spherical, nanotube, and flakes. Among them, the flakelike material [iPOP-5(F)] showed ultrafast capture efficiency (up to ∼99 and >85% removal within less than 1 min) with high saturation capacities (301 and 610 mg g^-1) toward chromate [Cr(VI)] and perrhenate [Re(VII)] oxoanions, respectively, in water. On the other hand, the spherical-shaped polymer [iPOP-5(S)] exhibited relatively slow removal kinetics (>5 min for complete removal) toward both Cr(VI) and Re(VII) oxoanions. Notably, iPOP-5(F) eliminated Cr(VI) and Re(VII) selectively even in the presence of excessive (∼100-fold) competing anions from both high- and low-concentration contaminated water. Further, the compound demonstrated efficient separation of those oxoanions in a wide pH range as well as in various water systems (such as potable, lake, river, sea, and tannery water) with superior regeneration ability. Moreover, as a proof of concept, a column exchange-based water treatment experiment by iPOP-5(F) has been performed to reduce the concentration of Cr(VI) and Re(VII) below the WHO permitted level. Mechanistic investigation suggested that the rare in situ exfoliation of flakes into thin nanosheets helps to achieve ultrafast capture efficiency. In addition, detailed theoretical binding energy calculations were executed in order to understand such rapid, selective binding of chromate and perrhenate oxoanions with iPOP-5(F) over other nonmetal-based anions.