New insights into the design of conjugated polymers for intramolecular singlet fission

Exclusive generation of a superoxide radical by a porous aromatic framework for fast photocatalytic decontamination of mustard gas simulant in room air

Mustard gas and other chemical warfare agents (CWAs) are a global threat to public security, arising from unpredictable emergencies and chemical spill accidents. So far, photocatalysts such as metal clusters, polyoxometalates and porous solids have been exploited for oxidative degradation of mustard gas, commonly with 1O2 as reactive species. However, the production of 1O2 is oxygen-dependent and requires a high oxygen concentration to sustain the detoxication process. For safety and operation process considerations, it is always preferable to rapidly detoxify dangerous chemicals in the atmosphere of room air. In this work, a porous aromatic framework, PAF-68, was synthesized as a metal-free photocatalyst. In the presence of PAF-68, fast detoxication occurred in typical room air atmosphere. The half-life (t 1/2) for the complete conversion of mustard gas simulant to nontoxic product in room air was only 1.7 min, which is comparable to the performance in pure oxygen, surpassing that of any other porous photocatalysts. It was found that ˙O2 - rather than 1O2 is the predominant reactive species initiated by PAF-68 for mustard gas detoxication. Unlike the formation of 1O2 which prefers the environment of pure oxygen, generation of the ˙O2 - is an oxygen-independent process. It is suggested that amorphous PAFs possess low exciton binding energy and long decay lifetime, which facilitate the generation of ˙O2 -, and this offers a general design strategy to detoxifying chemical warfare agents under real-world conditions.

Intramolecular singlet fission: Quantum dynamical simulations including the effect of the laser field

In the previous work [Reddy et al., J. Chem. Phys. 151, 044307 (2019)], we have analyzed the dynamics of the intramolecular singlet fission process in a series of prototypical pentacene-based dimers, where the pentacene monomers are covalently bonded to a phenylene linker in ortho, meta, and para positions. The results obtained were qualitatively consistent with the experimental data available, showing an ultrafast population of the multiexcitonic state that mainly takes place via a mediated (superexchange-like) mechanism involving charge transfer and doubly excited states. Our results also highlighted the instrumental role of molecular vibrations in the process as a sizable population of the multiexcitonic state could only be obtained through vibronic coupling. Here, we extend these studies and investigate the effect of the laser field on the dynamics of intramolecular singlet fission by explicitly including the coupling to the laser field in our model. In this manner, and by selectively tuning the laser field to the different low-lying absorption bands of the systems investigated, we analyze the wavelength dependence of the intramolecular singlet fission process. In addition, we have also analyzed how the nature of the initially photoexcited electronic state (either localized or delocalized) affects its dynamics. Altogether, our results provide new insights into the design of intramolecular singlet fission-active molecules.

Intramolecular Singlet Fission Coupled with Intermolecular Triplet Separation as a Strategy to Achieve High Triplet Yields in Fluorene-Based Small Molecules

In this work, detailed experimental proof and in-depth analysis of the singlet fission (SF) mechanism, operative in fluorene-based small molecules, are carried out by employing advanced time-resolved spectroscopies with nanosecond and femtosecond resolution. The investigation of the effect of solution concentration and solvent viscosity together with temperature and excitation wavelength demonstrates INTRAmolecular formation of the correlated triplet pair followed by INTERmolecular independent triplet separation via a "super-diffusional" triplet-triplet transfer process. This unconventional INTRA- to INTERmolecular SF may be considered an "ideal" mechanism. Indeed, intramolecular formation of the correlated triplet pair is here interestingly proved for small molecules rather than large multichromophoric systems, allowing easy synthesis and processability while maintaining good control over the SF process. On the other hand, the intermolecular triplet separation may be exploited to achieve high triplet quantum yields in these new SF small molecules.

Recent Advance in the Development of Singlet-Fission-Capable Polymeric Materials

Singlet fission (SF) is a spin-allowed process in which a higher-energy singlet exciton is converted into two lower-energy triplet excitons via a triplet pair intermediate state. Implementing SF in photovoltaic devices holds the potential to exceed the Shockley-Queisser limit of conventional single-junction solar cells. Although great progress has been made in exploiting the underlying mechanism of SF over the past decades, the scope of materials capable of SF, particularly polymeric materials, remains poor. SF-capable polymer is one of the most potential candidates in the implementation of SF into devices due to their distinct superiorities in flexibility, solution processability and self-assembly behavior. Notably, recent advancements have demonstrated high-performance SF in isolated donor-acceptor (D-A) copolymer chains. This review provides an overview of recent progress in the development of SF-capable polymeric materials, with a significant focus on elucidating the mechanisms of SF in polymers and optimizing the design strategies for SF-capable polymers. Additionally, the paper discusses the challenges encountered in this field and presents future perspectives. It is expected that this comprehensive review will offer valuable insights into the design of novel SF-capable polymeric materials, further advancing the potential for SF implementation in photovoltaic devices.

Data-Driven Discovery of Organic Electronic Materials Enabled by Hybrid Top-Down/Bottom-Up Design

The high-throughput exploration and screening of molecules for organic electronics involves either a 'top-down' curation and mining of existing repositories, or a 'bottom-up' assembly of user-defined fragments based on known synthetic templates. Both are time-consuming approaches requiring significant resources to compute electronic properties accurately. Here, 'top-down' is combined with 'bottom-up' through automatic assembly and statistical models, thus providing a platform for the fragment-based discovery of organic electronic materials. This study generates a top-down set of 117K synthesized molecules containing structures, electronic and topological properties and chemical composition, and uses them as building blocks for bottom-up design. A tool is developed to automate the coupling of these building blocks at their C(sp2/sp)-H bonds, providing a fundamental link between the two dataset construction philosophies. Statistical models are trained on this dataset and a subset of resulting top-down/bottom-up compounds, enabling on-the-fly prediction of ground and excited state properties with high accuracy across organic compound space. With access to ab initio-quality optical properties, this bottom-up pipeline may be applied to any materials design campaign using existing compounds as building blocks. To illustrate this, over a million molecules are screened for singlet fission. tThe leading candidates provide insight into the features promoting this multiexciton-generating process.

Organic Conjugated Small Molecules with High Thermal Conductivity as an Effective Coupling Layer for Heat Transfer

As the features of electronics are miniaturized, the need for interfacial thermal coupling layers to enhance their thermal transfer efficiency and improve device performance becomes critical. Organic conjugated small molecules possess a unique combination of periodic crystal structures and conjugated units with π electrons, resulting in notable thermal conductivities and molecular structure orientation that facilitates directed heat transfer. Nevertheless, there is a noticeable gap in literatures regarding the thermal properties of organic conjugated small molecules and their potential applications in nanoscale thermal management. Herein, we report the fabrication of high-quality thin films of organic conjugated small molecules. The result reveals that the 2D organic conjugated small molecule thin films exhibit a high cross-plane thermal conductivity of 3.2 W/m K. The increased thermal conductivity is attributed to the well-organized lattice structure and existence of π-electrons induced by conjugated systems. The studied conjugated small molecules engage in π-π stacking interactions with carbon materials and efficiently exchange energy with electrons in metals, promoting rapid interfacial heat transfer. These molecules act as coupling layers, significantly enhancing thermal transfer efficiency between graphite-based thermal pads and copper heat sinks. This pioneering research represents the inaugural investigation of the thermal performance of conjugated organic small molecules. These findings highlight the potential of conjugated small molecules as thermal coupling layers, offering tunable combinations of desirable properties.

Catalyzing Singlet Fission by Transition Metals: Second versus Third Row Effects

The synthesis and characterization of platinum(II) and palladium(II) complexes bearing two (dimers Pt(Lpc)2Cl2 and Pd(Lpc)2Cl2), one (monomers Pt(Lpc)(Lref)Cl2 and Pd(Lpc)(Lref)Cl2), or no (reference compounds Pt(Lref)2Cl2 and Pd(Lref)2Cl2) pentacene-based pyridyl ligands are presented. Photophysical properties of the dimers are probed by means of steady-state and time-resolved transient absorption measurements in comparison to the monomer and model compounds. Our results document that despite enhanced spin-orbit coupling from the presence of heavy atoms, intramolecular singlet fission (iSF) is not challenged by intersystem crossing. iSF thus yields correlated triplet pairs and even uncorrelated triplet excited states upon decoherence. Importantly, significant separation of the two pentacenyl groups facilitates decoupling of the two chromophores. Furthermore, the mechanism of iSF is altered depending on the respective metal center, that is, Pt(II) versus Pd(II). The dimer based on Pt(II), Pt(Lpc)2Cl2, exhibits a direct pathway for the iSF and forms a correlated triplet pair with singlet-quintet spin-mixing within 10 ns in variable solvents. On the other hand, the dimer based on Pd(II), Pd(Lpc)2Cl2, leads to charge transfer mixing during the population of the correlated triplet pair that is dependent on solvent polarity. Moreover, Pd(Lpc)2Cl2 gives rise to a stable equilibrium between singlet and quintet correlated triplet pairs with lifetimes of up to 170 ns. Inherent differences in the size and polarizability, when contrasting platinum(II) with palladium(II), are the most likely rationale for the underlying trends.

Excitation localization/delocalization induced intramolecular singlet fission in cyclopentadithiophene-based quinoidal derivatives

Two triplet excitons are generated through an ultrafast photophysical process, namely singlet fission (SF), providing a solution for efficient solar energy usage. In this work, we provide an effective guideline for designing SF materials by adjusting the planarity in cyclopentadithiophene (CPDT) derivatives. A practical strategy is proposed for tuning the quinoidal-biradical resonance structures by varying the electron push-pull groups of CPDTs for SF. The localized, delocalized, and intermediate charge-transfer excited configurations are predicted in the singlet excited state via computational simulations, which is further confirmed by ultrafast spectroscopy. Deduced from the potential energy surfaces in the low-lying excited states and transient absorption, the delocalized excited state is formed in 2.1 ps via postulated intramolecular SF in a polar solvent, followed by the ultrafast formation of the free triplet state with a lifetime of 6.8 ps. In comparison with different cross-conjugated chromophores, it is found that the increase in the charge separation could enhance the triplet-pair generation for iSF. We expect that by introducing symmetry-breaking modifications in the electronic configurations and adjusting the separation between the push-pull groups of CPDTs, it should be possible to prolong the duration of the free triplet state by preventing recombination within the triplet-pair excited configuration.

Leveraging Charge-Transfer Interactions in Through-Space-Coupled Pentacene Dendritic Oligomer for Singlet Exciton Fission

Singlet exciton fission in organic chromophores has received much attention during the past decade. Inspired by numerous spectroscopic studies in the solid state, there have been vigorous efforts to study singlet exciton fission dynamics in covalently bonded oligomers, which aims to investigate underlying mechanisms of this intriguing process in simplified model systems. In terms of through-space orbital interactions, however, most of covalently bonded pentacene oligomers studied so far fall into weakly interacting systems since they manifest chain-like structures based on various (non)conjugated linkers. Therefore, it remains as a compelling question to answer how through-space interactions in the solid state intervene this photophysical process since it is hypersensitive to displacements and orientations between neighboring chromophores. Herein, as one of experimental studies to answer this question, we introduced a tight-packing dendritic structure whose mesityl-pentacene constituents are coupled via moderate through-space orbital interactions. Based on the comparison with a suitably controlled dendritic structure, which is in a weak coupling regime, important mechanistic viewpoints are tackled such as configurational mixings between singlet, charge-transfer, and triplet pair states and the role of chromophore multiplication. We underscore that our through-space-coupled dendritic oligomer in a quasi-intermediate coupling regime provides a hint on the interplay of multiconfigurational excited-states, which might have drawn complexity in singlet exciton fission kinetics throughout numerous solid-state morphologies.

Unveiling the double triplet nature of the 2Ag state in conjugated stilbenoid compounds to achieve efficient singlet fission

In this investigation, the excited-state evolution in a series of all-trans stilbenoid compounds, displaying a low-lying dark singlet state of 2Ag-like symmetry nearly degenerate with the bright 1Bu state, was unveiled by employing advanced ultrafast spectroscopies while probing the effect of solvent polarizability. Together with the dual emission, femtosecond transient absorption and broadband fluorescence up-conversion disclosed the double nature of the 2Ag-like state showing both singlet features, a lifetime typical of a singlet and the ability to emit, and a triplet character, exhibiting a triplet-like absorption spectrum. The ultrafast formation (in hundreds of femtoseconds) from the non-relaxed upper singlet state led to the identification of 2Ag as the correlated triplet pair of singlet fission. The spectral difference obtained by comparison of transient absorption peaks of the 2Ag (1TT) and the triplet states was found to be in remarkable agreement with the observed triplet yield and the 1(TT) separation rate constant. Indeed, this spectral shift provided an experimental method to gain qualitative insight into the ease of separation of the 1(TT) and the relative SF efficiency. The highly conjugated polyene-like structures enable the ultrafast formation of the double triplet, but then the large binding energy prevents the triplet separation and thus the effective completion of singlet fission. Even though thermodynamically feasible for all the investigated stilbenoids according to TD-DFT calculations, singlet fission resulted to occur efficiently in the case of 1-(pyridyl-4-ylethenyl)-4-(p-nitrostyryl)benzene and nitro-styrylfuran with the triplet yield reaching 120% and 140%, respectively, triggered by their greatly enhanced intramolecular charge transfer character relative to the other compounds in the series.

Veil of the Charge Transfer State in Bay-Annulated Indigo-Based Donor-Acceptor Systems: Charge Separation versus Singlet Fission

Bay-annulated indigo (BAI) is a new potential SF-active building block, which has aroused great interest in the design of highly stable singlet fission materials. However, singlet fission of unfunctionalized BAI is inactive due to the inappropriate energy levels. Herein, we seek to develop a new design strategy by introducing the charge transfer interaction to tune the exciton dynamics of BAI derivatives. A new donor-acceptor molecule (TPA-2BAI) and two control molecules (TPA-BAI and 2TPA-BAI) were designed and synthesized to unravel the veil of CT states in tuning the excited-state dynamics of BAI derivatives. Transient absorption spectroscopy studies show that CT states are generated immediately following the excitation. However, the low-lying CT states induced by strong donor-acceptor interactions result in them acting as trap states and inhibiting the SF process. These results show that the low-lying CT state is detrimental to SF and provide insight into the design of CT-mediated BAI-based SF materials.

Dynamic Evolving Exothermicity Steers Ultrafast Formation of a Correlated Triplet Pair State

Singlet fission (SF) presents an attractive solution to overcome the Shockley-Queisser limit of single-junction solar cells. The conversion from an initial singlet state to final triplet is mediated by the correlated triplet pair state ¹(T₁T₁). Despite significant advancement on ¹(T₁T₁) properties and its role in SF, a comprehensive understanding of the energetic landscape during SF is still unclear. Here, we study an unconventional SF system with excited-state aromaticity, i.e., cyano-substituted dipyrrolonaphtheridinedione derivative (DPND-CN), using time-resolved spectroscopy as a function of the temperature. We demonstrate that the population transfer from S₁ to ¹(T₁T₁) is driven by a time-dependent exothermicity resulting from the coherent coupling between electronic and spin degrees of freedom. This is followed by thermal-activated dissociation of ¹(T₁T₁) to yield free triplets. Our results provide some new insight into the SF mechanism, which may guide the development of new efficient and stable SF materials for practical applications.

Aza-Cibalackrot: Turning on Singlet Fission Through Crystal Engineering

Singlet fission is a photophysical process that provides a pathway for more efficient harvesting of solar energy in photovoltaic devices. The design of singlet fission candidates is non-trivial and requires careful optimization of two key criteria: (1) correct energetic alignment and (2) appropriate intermolecular coupling. Meanwhile, this optimization must not come at the cost of molecular stability or feasibility for device applications. Cibalackrot is a historic and stable organic dye which, although it has been suggested to have ideal energetics, does not undergo singlet fission due to large interchromophore distances, as suggested by single crystal analysis. Thus, while the energetic alignment is satisfactory, the molecule does not have the desired intermolecular coupling. Herein, we improve this characteristic through molecular engineering with the first synthesis of an aza-cibalackrot and show, using ultrafast transient spectroscopy, that singlet fission is successfully "turned on."

Generating Long-Lived Triplet Excited States in Narrow Bandgap Conjugated Polymers

Narrow bandgap conjugated polymers are a heavily studied class of organic semiconductors, but their excited states usually have a very short lifetime, limiting their scope for applications. One approach to overcome the short lifetime is to populate long-lived triplet states for which relaxation to the ground state is forbidden. However, the triplet lifetime of narrow bandgap polymer films is typically limited to a few microseconds. Here, we investigated the effect of film morphology on triplet dynamics in red-emitting conjugated polymers based on the classic benzodithiophene monomer unit with the solubilizing alkyl side chains C₁₆ and C₂C₆ and then used Pd porphyrin sensitization as a further strategy to change the triplet dynamics. Using transient absorption spectroscopy, we demonstrated a 0.45 ms triplet lifetime for the more crystalline nonsensitized polymer C₂C₆, 2-3 orders of magnitude longer than typically reported, while the amorphous C₁₆ had only a 5 μs lifetime. The increase is partly due to delaying bimolecular electron-hole recombination in the more crystalline C₂C_6, where a higher energy barrier for charge recombination is expected. A triplet lifetime of 0.4 ms was also achieved by covalently incorporating 5% of Pd porphyrin into the C₁₆ polymer, which introduced extra energy transfer steps between the polymer and porphyrin that delayed triplet dynamics and increased the polymer triplet yield by 7.9 times. This work demonstrates two synthetic approaches to generate the longest-lived triplet excited states in narrow bandgap conjugated polymers, which is of necessity in a wide range of fields that range from organic electronics to sensors and bioapplications.

Highly Effective Generation of Singlet Oxygen by an Imidazole-Linked Robust Photosensitizing Covalent Organic Framework

Developing effective photosensitizers to initiate the generation of singlet oxygen (¹O₂) is of great significance in both chemistry and physiology. Herein, linking the photoactive porphyrin moieties by in situ-formed robust imidazole groups, a covalent organic framework (COF), PyPor-COF, was successfully designed and synthesized. Detailed characterizations reveal that it not only possesses high crystallinity, permanent porosity, and robust stability but also shows a semiconductive photoresponse activity. As demonstrated by electron paramagnetic resonance experiments, the COF can initiate the generation of ¹O₂ efficiently under visible-light irradiation, the efficiency of which is higher than that of the pristine porphyrin-based reactant and even higher than some commonly used commercially available photosensitizing agents. Anticancer experiments prove that it can efficiently trigger the production of ¹O₂ in a physiological environment. This work demonstrates that the imidazole-linked porphyrin-incorporated COF is a highly promising photosensitizer that can even be applied in photodynamic therapy.

Inducing Singlet Fission in Perylene Thin Films by Molecular Contortion

Singlet fission occurs only in a limited number of molecules, and expanding the molecular toolbox is necessary for progress. Here, we apply the molecular contortion strategy to tune singlet and triplet energies and observe changes in the excited-state dynamics that are consistent with singlet fission playing a role in thin films of contorted perylene. Perylene is a prototypical molecular chromophore, which does not undergo singlet fission in its planar form from its S₁ state. The tuning of the energetics that control singlet fission through molecular contortion can be applied to a large repertoire of established molecular chromophores.

Direct Exciton Harvesting from a Bound Triplet Pair

Singlet fission is commonly defined as the generation of two triplet excitons from a single absorbed photon. However, ambiguities within this definition arise due to the complexity of the various double triplet states that exist in SF chromophores and the corresponding interconversion processes. To clarify this process, singlet fission is frequently depicted as sequential two-step conversion in which a singlet exciton decays into a bound triplet-pair biexciton state that dissociates into two "free" triplet excitons. However, this model discounts the potential for direct harvesting from the coupled biexciton state. Here, it is demonstrated that individual triplet excitons can be extracted directly from a bound triplet pair. It is demonstrated that due to the requirement for geminate triplet-triplet annihilation in intramolecular singlet fission compounds, unique spectral and kinetic signatures can be used to quantify triplet-pair harvesting yields. An internal quantum efficiency for triplet exciton transfer from the triplet pair of >50%, limited only by the solubility of the compounds is achieved. The harvesting process is not dependent on the net multiplicity of the triplet-pair state, suggesting that an explicit, independent dissociation step is not a requirement for using triplet pairs to do chemical or electrical work.

Parallel triplet formation pathways in a singlet fission material

Harvesting long-lived free triplets in high yields by utilizing organic singlet fission materials can be the cornerstone for increasing photovoltaic efficiencies potentially. However, except for polyacenes, which are the most studied systems in the singlet fission field, spin-entangled correlated triplet pairs and free triplets born through singlet fission are relatively poorly characterized. By utilizing transient absorption and photoluminescence spectroscopy in supramolecular aggregate thin films consisting of Hamilton-receptor-substituted diketopyrrolopyrrole derivatives, we show that photoexcitation gives rise to the formation of spin-0 correlated triplet pair ¹(TT) from the lower Frenkel exciton state. The existence of ¹(TT) is proved through faint Herzberg-Teller emission that is enabled by vibronic coupling and correlated with an artifact-free triplet-state photoinduced absorption in the near-infrared. Surprisingly, transient electron paramagnetic resonance reveals that long-lived triplets are produced through classical intersystem crossing instead of ¹(TT) dissociation, with the two pathways in competition. Moreover, comparison of the triplet-formation dynamics in J-like and H-like thin films with the same energetics reveals that spin-orbit coupling mediated intersystem crossing persists in both. However, ¹(TT) only forms in the J-like film, pinpointing the huge impact of intermolecular coupling geometry on singlet fission dynamics.

Singlet Fission in Colloidal Nanoparticles of Amphipathic Diketopyrrolopyrrole Derivatives: Probing the Role of the Charge Transfer State

To evaluate the role of the charge transfer (CT) state in the singlet fission (SF) process, we prepared three 3,6-bis(thiophen-2-yl)diketopyrrolopyrrole (TDPP) derivatives with zero (Ph₂TDPP), one (Ph₂TDPP-COOH), and two (Ph₂TDPP-(COOH)₂) carboxylic groups, respectively. Their colloidal nanoparticles were also prepared by a simple precipitation method. The SF dynamics and mechanism in these colloid nanoparticles were investigated by using steady-state/transient absorption and fluorescence spectroscopy. Steady-state absorption spectra reveal that the strength of the CT resonance interactions between the adjacent DPP units is increased gradually from Ph₂TDPP to Ph₂TDPP-COOH and then to Ph₂TDPP-(COOH)₂. Fluorescence and transient absorption spectra demonstrate that SF is proceeded via a CT-assisted superexchange mechanism in these three nanoparticles. Furthermore, SF rate and yield are enhanced gradually with the increase of the number of the carboxylic group, which may be attributed to the enhancement of the CT coupling strength. The result of this work not only provides a better understanding of the SF mechanism especially for the role of the CT state but also gives some new insights for the design of efficient SF materials based on DPP derivatives.

Effects of the Separation Distance between Two Triplet States Produced from Intramolecular Singlet Fission on the Two-Electron-Transfer Process

To harvest two triplet excitons of singlet fission (SF) via a two-electron transfer efficiently, the revelation of the key factors that influence the two-electron-transfer process is necessary. Here, by using steady-state and transient absorption/fluorescence spectroscopy, we investigated the two-electron-transfer process from the two triplet excitons of intramolecular SF (iSF) in a series of tetracene oligomers (dimer, trimer, and tetramer) with 7,7,8,8-tetracyanoquinodimethane (TCNQ) as an electron acceptor in solution. Quantitative two-electron transfer could be conducted for the trimer and tetramer, and the rate for the tetramer is faster than that for the trimer. However, the maximum efficiency of the two-electron transfer in the dimer is relatively low (∼47%). The calculation result of the free energy change (ΔG) of the second-electron transfer for these three compounds (-0.024, -0.061, and -0.074 eV for the dimer, trimer, and tetramer, respectively) is consistent with the experimental observation. The much closer ΔG value to zero for the dimer should be responsible for its low efficiency of the two-electron transfer. Different ΔG values for these three oligomers are attributed to the different Coulomb repulsive energies between the two positive charges generated after the two-electron transfer that is caused by their various intertriplet distances. This result reveals for the first time the important effect of the Coulomb repulsive energy, which depends on the intertriplet distance, on the two-electron transfer process from the two triplet excitons of iSF.

Singlet Fission Materials for Photovoltaics: from Small Molecules to Macromolecules

Singlet fission (SF) is a spin-allowed process in which a singlet state splits into two triplet states. Materials that enable SF have attracted great attention in the last decade, mainly stemming from the potential of overcoming the Shockley-Queisser (SQ) limit in photoenergy conversion. In the past decade, a large number of new molecules exhibiting SF have been explored and many devices based on SF materials have been studied, though the mechanistic understanding is still obscure. This review focuses on the recent developments of SF materials, including small molecules, oligomers and polymers. The molecular design strategies and related mechanisms of SF are discussed. Then the dynamics of charge transfer and energy transfer between SF materials and other materials are introduced. Further, we discuss the progresses of implementing SF in photovoltaics. It is hoped that a comprehensive understanding to the SF materials, devices and mechanism may pave a new way for the design of next generation photovoltaics. This article is protected by copyright. All rights reserved.

Parallel versus Twisted Pentacenes: Conformational Impact on Singlet Fission

We placed two pentacene chromophores at the termini of a diacetylene linker to investigate the impact of excitation wavelength, conformational flexibility, and vibronic coupling on singlet fission. Photoexcitation of the low-energy absorption results in a superposed mixture of states, which transform on an ultrafast time-scale into a spin-correlated and vibronically coupled/hot delocalized triplet pair 1(T1T1)deloc. Regardless of temperature, the lifetime for 1(T1T1)deloc is less than 2 ps. In contrast, photoexcitation of the high-energy absorption results in the formation of 1(T1T1)deloc lasting 1.0 ps, which then decays at room temperature within 4 ps via triplet-triplet annihilation. Lowering the temperature enables 1(T1T1)deloc to delocalize and vibronically decouple, in turn affording 1(T1T1)loc. In addition, our results suggest that the quasi-free rotation at the diacetylene spacer may lead to twisted conformations with very low SF quantum yields, highlighting the need of controlling this structural aspect in the design of new singlet fission active molecules.

Optimizing the Thermodynamics and Kinetics of the Triplet-Pair Dissociation in Donor-Acceptor Copolymers for Intramolecular Singlet Fission

Singlet fission (SF) is a two-step process in which a singlet splits into two triplets throughout the so-called correlated triplet-pair (1TT) state. Intramolecular SF (iSF) materials, in particular, have attracted growing interest as they can be easily implemented in single-junction solar cells and boost their power conversion efficiency. Still, the potential of iSF materials such as polymers and oligomers for photovoltaic applications has been partially hindered by their ability to go beyond the 1TT intermediate and generate free triplets, whose mechanism remains poorly understood. In this work, the main aspects governing the 1TT dissociation in donor-acceptor copolymers and the key features that optimize this process are exposed. First, we show that both thermodynamics and kinetics play a crucial role in the intramolecular triplet-pair separation and second, we uncover the inherent flexibility of the donor unit as the fundamental ingredient to optimize them simultaneously. Overall, these results provide a better understanding of the intramolecular 1TT dissociation process and establish a new paradigm for the development of novel iSF active materials.

Altering singlet fission pathways in perylene-dimers; perylene-diimide versus perylene-monoimide

We used a systematic approach to shed light on the inherent differences in perylenes, namely monoimides versus diimides, including coplanarity and dipole moment, and their impact on singlet fission (SF) by designing, synthesizing, and probing a full fledged series of phenylene- and naphthalene-linked dimers. Next to changing the functionality of the perylene core, we probed the effect of the spacers and their varying degrees of rotational freedom, molecular electrostatic potentials, and intramolecular interactions on the SF-mechanism and -efficiencies. An arsenal of spectroscopic techniques revealed that for perylene-monoimides, a strong charge-transfer mixing with the singlet and triplet excited states restricts SF and yields low triplet quantum yields. This is accompanied by an up-conversion channel that includes geminate triplet-triplet recombination. Using perylene-diimides alters the SF-mechanism by populating a charge-separated-state intermediate, which either favors or shuts-down SF. Napthylene-spacers bring about higher triplet quantum yields and overall better SF-performance for all perylene-monoimides and perylene-diimides. The key to better SF-performance is rotational freedom because it facilitates the overall excited-state polarization and amplifies intramolecular interactions between chromophores.

Design of asymmetric-adhesion lignin reinforced hydrogels with anti-interference for strain sensing and moist air induced electricity generator

Flexible hydrogels with integration of excellent mechanical and electrical properties are well suited for applications as wearable electronic sensors, and others. Self-adhesion is an important feature of wearable sensors. However, the usual isotropic- adhesion hydrogels have the drawback of poor anti-interference, which negatively affects their applications. In this study, we developed asymmetric-adhesion and tough lignin reinforced hydrogels in a facile two-step process: 1) PAA hydrogels, with lignin as the binder and conductive filler, were first prepared; 2) the asymmetric-adhesion property was imparted to lignin reinforced hydrogel by simple soaking of the top portion of the hydrogel in CaCl₂ solution. The as-obtained asymmetric-adhesion lignin reinforced hydrogel was assembled into a wearable sensor, which shows excellent anti-interference and accurate and stable collections of sensing signals, with its gauge factor (GF) of 2.51 (in the strain range of 0-51.5%). In addition, the tough hydrogel is capable of generating electricity upon moist air sweeping through it, showing excellent energy conversion capabilities, with open-circuit voltage of as high as 306.6 mV. These results provided new prospects for the application of polyelectrolyte hydrogel materials in the fields of wet-to-electric conversion and wearable electronic sensors.

Quantifying Exciton Transport in Singlet Fission Diblock Copolymers

Singlet fission (SF) is a mechanism of exciton multiplication in organic chromophores, which has potential to drive highly efficient optoelectronic devices. Creating effective device architectures that operate by SF critically depends on electronic interactions across multiple length scales─from individual molecules to interchromophore interactions that facilitate multiexciton dephasing and exciton diffusion toward donor-acceptor interfaces. Therefore, it is imperative to understand the underpinnings of multiexciton transport and interfacial energy transfer in multichromophore systems. Interestingly, block copolymers (BCPs) can be designed to control multiscale interactions by tailoring the nature of the building blocks, yet SF dynamics are not well understood in these macromolecules. Here, we designed diblock copolymers comprising an inherent energy cleft at the interface between a block with pendent pentacene chromophores and an additional block with pendent tetracene chromophores. The singlet and triplet energy offset between the two blocks creates a driving force for exciton transport along the BCP chain in dilute solution. Using time-resolved optical spectroscopy, we have quantified the yields of key energy transfer steps, including both singlet and triplet energy transfer processes across the pentacene-tetracene interface. From this modular BCP architecture, we correlate the energy transfer time scales and relative yields with the length of each block. The ability to quantify these energy transfer processes provides valuable insights into exciton transport at critical length scales between bulk crystalline systems and small-molecule dimers─an area that has been underexplored.

Heteroatom oxidation controls singlet-triplet energy splitting in singlet fission building blocks

Singlet fission (SF) is a promising multiexciton-generating process. Its demanding energy splitting criterion - that the S₁ energy must be at least twice that of T₁ - has limited the range of materials capable of SF. We propose heteroatom oxidation as a robust strategy to achieve sufficient S₁/T₁ splitting, and demonstrate the potential of this approach for intramolecular SF.

Singlet fission and triplet pair recombination in bipentacenes with a twist

We investigate triplet pair dynamics in pentacene dimers that have varying degrees of coplanarity (pentacene-pentacene twist angle). The fine-tuning of the twist angle was achieved by alternating connectivity at the 1-position or 2-positions of pentacene. This mix-and-match connectivity leads to tunable twist angles between the two covalently linked pentacenes. These twisted dimers allow us to investigate the subtle effects that the dihedral angle between the covalently linked pentacenes imparts on singlet fission and triplet pair recombination dynamics. We observe that as the dihedral angle between the two bonded pentacenes is increased, the rates of singlet fission decrease, while the accompanying decrease in triplet recombination rates is stark. Temperature-dependent transient optical studies combined with theoretical calculations show that the triplet pair recombination proceeds primarily through a direct multiexciton internal conversion process. Calculations further show that the significant decrease in recombination rates can be directly attributed to a corresponding decrease in the magnitude of the nonadiabatic coupling between the singlet multiexcitonic state and the ground state. These results highlight the importance of the twist angle in designing systems that exhibit rapid singlet fission, while maintaining long triplet pair lifetimes in pentacene dimers.

Pushing the Limits of the Donor-Acceptor Copolymer Strategy for Intramolecular Singlet Fission

Donor-acceptor (D-A) copolymers have shown great potential for intramolecular singlet fission (iSF). Nonetheless, very few design principles exist for optimizing these systems for iSF, with very little knowledge about how to engineer them for this purpose. In recent work, a fundamental trade-off between the main electronic ingredients required for iSF capable D-A coplanar copolymers was revealed. Still, further investigations are needed to understand these limitations and learn how to bypass them. In this work, we propose to induce torsion as an effective way to circumvent the limits of the coplanar approach. We disclose the potential of noncoplanar copolymers with inherently low triplet energies that encompass all the characteristics required for iSF beyond the limiting values associated with fully coplanar systems. Our findings shed some light on the electronic structure aspects of D-A copolymers for iSF and offer a new avenue for the rational design of novel promising candidates.

Singlet Fission Dynamics of Colloidal Nanoparticles of a Perylenediimide Derivative in Solutions

Singlet fission (SF) is an intriguing process in which a singlet exciton produces two triplet excitons in molecular aggregates. Perylenediimide (PDI) derivatives are promising materials for SF-based photovoltaics, and the SF process in PDI aggregates is important to investigate for their applications. In this work, we studied the entire SF process occurring in the colloidal nanoparticles of a PDI derivative in solutions by using time-resolved fluorescence and transient absorption (TA) experiments. PE-PDI was found to form the colloidal nanoparticles of H- and J-aggregates in polar solvents. The TA signals of PE-PDI aggregates in solutions were selectively measured by wavelength-dependent excitation. The TA signals were analyzed by using a global fitting analysis, and all kinetic parameters involved in the entire SF process were determined. Our current investigation has confirmed that fast SF occurs on the surface of the colloidal nanoparticles of PDI aggregates via the charge transfer mediated mechanism, giving a high quantum yield of triplet excitons.

Recent advances in the application of isoindigo derivatives in materials chemistry

In this review, the data on the application of isoindigo derivatives in the chemistry of functional materials are analyzed and summarized. These bisheterocycles can be used in the creation of organic solar cells, sensors, lithium ion batteries as well as in OFET and OLED technologies. The potentials of the use of polymer structures based on isoindigo as photoactive component in the photoelectrochemical reduction of water, as matrix for MALDI spectrometry and in photothermal cancer therapy are also shown. Data published over the past 5 years, including works published at the beginning of 2021, are given.

High-Lying 31Ag Dark-State-Mediated Singlet Fission

Singlet fission (SF), the conversion of one high-energy singlet to two low-energy triplets, provides the potential to increase the efficiency of photovoltaic devices. In the SF chromophores with C_2h symmetry, exemplified by polyenes, singlet-to-triplet conversion generally involves a low-lying 2¹A_g dark state, which serves as either a multiexciton (ME) intermediate to promote the SF process or a parasitic trap state to shunt excited-state populations via internal conversion. This controversial behavior calls for a deep understanding of dark-state-related photophysics involving the higher-lying singlet state. However, the optical "dark" and "transient" nature of these dark states and strong correlation feature of double exciton species make their characterization and interpretation challenging from both experimental and computational perspectives. In the present work combining transient spectroscopy and multireference electronic structure calculations (XDW-CASPT2), we addressed a new photophysical model, i.e., a high-lying 3¹A_g dark-state-mediated ultrafast SF process in the benzodipyrrolidone (BDPP) skeleton. Such a 3¹A_g dark state with distinctive double excitation character, described as the ME state, could be populated from the initial 1¹B_u bright state on an ultrafast time scale given the quasi-degeneracy and intersection of the two electronic states. Furthermore, the suitable optical band gap and triplet energy, high triplet yield, and excellent photostability render BDPP a promising SF candidate for photovoltaic devices. These results not only enrich the arsenal of SF materials but also shed new insights into the understanding of dark-state-related photophysics, which could promote the development of new SF-active materials.

Exciton Diffusion in Highly-Ordered One Dimensional Conjugated Polymers: Effects of Back-Bone Torsion, Electronic Symmetry, Phonons and Annihilation

Many optoelectronic devices based on organic materials require rapid and long-range singlet exciton transport. Key factors controlling exciton transport include material structure, exciton-phonon coupling and electronic state symmetry. Here, we employ femtosecond transient absorption microscopy to study the influence of these parameters on exciton transport in one-dimensional conjugated polymers. We find that excitons with 2¹A_g^- symmetry and a planar backbone exhibit a significantly higher diffusion coefficient (34 ± 10 cm² s^-1) compared to excitons with 1¹B_u⁺ symmetry (7 ± 6 cm² s^-1) with a twisted backbone. We also find that exciton transport in the 2¹A_g^- state occurs without exciton-exciton annihilation. Both 2¹A_g^- and 1¹B_u⁺ states are found to exhibit subdiffusive behavior. Ab initio GW-BSE calculations reveal that this is due to the comparable strengths of the exciton-phonon interaction and exciton coupling. Our results demonstrate the link between electronic state symmetry, backbone torsion and phonons in exciton transport in π-conjugated polymers.

Exploiting a Neutral BODIPY Copolymer as an Effective Agent for Photodynamic Antimicrobial Inactivation

We report the synthesis and photophysical properties of a neutral BODIPY photosensitizing copolymer (poly-8-(4-hydroxymethylphenyl)-4,4-difluoro-2,6-diethynyl-4-bora-3a,4a-diaza-s-indacene) containing ethynylbenzene links between the BODIPY units. The copolymer absorbs further towards the red in the UV-vis spectrum compared to the BODIPY precursor. Photolysis of the polymer produces a singlet excited state which crosses to the triplet surface in less than 300 ps. This triplet state was used to form singlet oxygen with a quantum yield of 0.34. The steps leading to population of the triplet state were studied using time-resolved spectroscopic techniques spanning the pico- to nanosecond timescales. The ability of the BODIPY polymer to generate a biocidal species for bactericidal activity in both solution- and coating-based studies was assessed. When the BODIPY copolymer was dropcast onto a surface, 4 log and 6 log reductions in colony forming units/ml representative of Gram-positive and Gram-negative bacteria, respectively, under illumination at 525 nm were observed. The potent broad-spectrum antimicrobial activity of a neutral metal-free copolymer when exposed to visible light conditions may have potential clinical applications in infection management.

Singlet Fission in a Flexible Bichromophore with Structural and Dynamic Control

Singlet fission (SF), i.e., the splitting of a high-energy exciton into two lower-energy triplet excitons, has the potential to increase the efficiency for harvesting spectrally broad light. The path from the photopopulated singlet state to free triplets is complicated by competing processes that decrease the overall SF efficiency. A detailed understanding of the whole cascade and the nature of the photoexcited singlet state is still a major challenge. Here, we introduce a pentacene dimer with a flexible crown ether spacer enabling a control of the interchromophore coupling upon solvent-induced self-aggregation as well as cation binding. The systematic change of solvent polarity and viscosity and excitation wavelength, as well as the available conformational phase space, allows us to draw a coherent picture of the whole SF cascade from the femtosecond to microsecond time scales. High coupling leads to ultrafast SF (<2 ps), independent of the solvent polarity, and to highly coupled correlated triplet pairs. The absence of a polarity effect indicates that the solvent coordinate does not play a significant role and that SF is driven by intramolecular modes. Low coupling results in much slower SF (∼500 ps), which depends on viscosity, and leads to weakly coupled correlated triplet pairs. These two triplet pairs could be spectrally distinguished and their contribution to the overall SF efficiency, i.e., to the population of free triplets, could be determined. Our results reveal how the overall SF efficiency can be increased by conformational restrictions and control of the structural fluctuation dynamics.

Charge transfer states impact the triplet pair dynamics of singlet fission polymers

Polymers are desirable optoelectronic materials, stemming from their solution processability, tunable electronic properties, and large absorption coefficients. An exciting development is the recent discovery that singlet fission (SF), the conversion of a singlet exciton to a pair of triplet states, can occur along the backbone of an individual conjugated polymer chain. Compared to other intramolecular SF compounds, the nature of the triplet pair state in SF polymers remains poorly understood, hampering the development of new materials with optimized excited state dynamics. Here, we investigate the effect of solvent polarity on the triplet pair dynamics in the SF polymer polybenzodithiophene-thiophene-1,1-dioxide. We use transient emission measurements to study isolated polymer chains in solution and use the change in the solvent polarity to investigate the role of charge transfer character in both the singlet exciton and the triplet pair multiexciton. We identify both singlet fluorescence and direct triplet pair emission, indicating significant symmetry breaking. Surprisingly, the singlet emission peak is relatively insensitive to solvent polarity despite its nominal "charge-transfer" nature. In contrast, the redshift of the triplet pair energy with increasing solvent polarity indicates significant charge transfer character. While the energy separation between singlet and triplet pair states increases with solvent polarity, the overall SF rate constant depends on both the energetic driving force and additional environmental factors. The triplet pair lifetime is directly determined by the solvent effect on its overall energy. The dominant recombination channel is a concerted, radiationless decay process that scales as predicted by a simple energy gap law.

Dynamic emissive signatures of intramolecular singlet fission during equilibration to steady state revealed from stochastic kinetic simulations

We investigate the ability of dynamic fluorescence probes to accurately track populations of multi-excitonic states in molecular dyads based on conjugated acenes capable of intramolecular singlet fission (iSF). Stochastic simulations of reported photophysical models from time-resolved spectroscopic studies of iSF dyads based on large acenes (e.g., tetracene and pentacene) are used to extrapolate population and fluorescence yield dynamics. The approach entails the use of repetitive rectangular-shaped excitation waveforms as a stimulus, with durations comparable to triplet lifetimes. We observe unique dynamics signatures that can be directly related to relaxation of multi-exciton states involved over the entire effective time of singlet fission in the presence and absence of an excitation light stimulus. In particular, time-dependent fluorescence yields display an abrupt decay followed by slower rise dynamics appearing as a prominent "dip" feature in responses. The initial fast decrease in the fluorescence yield arises from the formation of triplet pairs and separated triplets that do not produce emission resembling a complete ground state bleach effect. However, relaxation of one separated triplet allows the system to absorb, and in some cases, this increases the fluorescence yield, causing rise dynamics in the emissive response. Our approach also permits extrapolation of all multi-exciton state population dynamics up to steady state conditions in addition to the ability to explore consequences of alternative relaxation channels. The results demonstrate that it is possible to resolve unique signatures of singlet fission events from dynamic fluorescence studies, which can augment detection capabilities and extend sensitivity limits and accessible time scales.

Emissive spin-0 triplet-pairs are a direct product of triplet-triplet annihilation in pentacene single crystals and anthradithiophene films

Singlet fission and triplet-triplet annihilation represent two highly promising ways of increasing the efficiency of photovoltaic devices. Both processes are believed to be mediated by a biexcitonic triplet-pair state, ¹(TT). Recently however, there has been debate over the role of ¹(TT) in triplet-triplet annihilation. Here we use intensity-dependent, low-temperature photoluminescence measurements, combined with kinetic modelling, to show that distinct ¹(TT) emission arises directly from triplet-triplet annihilation in high-quality pentacene single crystals and anthradithiophene (diF-TES-ADT) thin films. This work demonstrates that a real, emissive triplet-pair state acts as an intermediate in both singlet fission and triplet-triplet annihilation and that this is true for both endo- and exothermic singlet fission materials.

Direct, Mediated, and Delayed Intramolecular Singlet Fission Mechanism in Donor-Acceptor Copolymers

Donor-acceptor (D-A) extended copolymers have shown great potential to be exploited for intramolecular singlet fission (iSF) because of their modular tunability and intrinsic ability to incorporate low-lying charge-transfer (CT) and a triplet-pair (¹TT) states. While the SF mechanism has been widely debated in homo- and heterodimers, little is known about the singlet splitting process in A-D-A copolymer trimers. Unlike traditional two-site SF, the process of iSF in D-A copolymers involves three molecular units consisting of two A's and one D following an A-D-A polymeric chain. This scenario is, therefore, different from that of the homodimer analogues in terms of which states (if any) may drive the SF process. In this work, we identify how singlet splitting occurs in prototypical iSF D-A copolymer poly(benzodithiophene-alt-thiophene-1,1-dioxide) by means of wave packet propagations on the basis of the linear vibronic coupling model Hamiltonian. Our results reveal that three different mechanisms drive the S₁ → ¹TT population transfer via antisymmetric and symmetric vibrational motion, including two favorable mechanisms of direct and mediated interactions, as well as a parasitic decay pathway that potentially delays the process. Remarkably, we uncover the interplay between an upper state of marked multiexcitonic character and a low-lying CT state in balancing the splitting efficiency, which anticipates their major role in defining future guidelines for the molecular design of D-A copolymers for iSF.

Bridge Resonance Effects in Singlet Fission

A major benefit of intramolecular singlet fission (iSF) materials, in which through-bond interactions mediate triplet pair formation, is the ability to control the triplet formation dynamics through molecular engineering. One common design strategy is the use of molecular bridges to mediate interchromophore interactions, decreasing electronic coupling by increasing chromophore-chromophore separation. Here, we report how the judicious choice of aromatic bridges can enhance chromophore-chromophore electronic coupling. This molecular engineering strategy takes advantage of "bridge resonance", in which the frontier orbital energies are nearly degenerate with those of the covalently linked singlet fission chromophores, resulting in fast iSF even at large interchromophore separations. Using transient absorption spectroscopy, we investigate this bridge resonance effect in a series of pentacene and tetracene-bridged dimers, and we find that the rate of triplet formation is enhanced as the bridge orbitals approach resonance. This work highlights the important role of molecular connectivity in controlling the rate of iSF through chemical bonds and establishes critical design principles for future use of iSF materials in optoelectronic devices.