1
|
Migliore JM, Hewitt P, Dingemans TJ, Simone DL, Monzel WJ. Effect of Water-Soluble Polymers on the Rheology and Microstructure of Polymer-Modified Geopolymer Glass-Ceramics. MATERIALS (BASEL, SWITZERLAND) 2024; 17:2856. [PMID: 38930225 PMCID: PMC11204717 DOI: 10.3390/ma17122856] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/07/2024] [Revised: 06/04/2024] [Accepted: 06/07/2024] [Indexed: 06/28/2024]
Abstract
This work explores the effects of rigid (0.1, 0.25, and 0.5 wt. %) and semi-flexible (0.5, 1.0, and 2.5 wt. %) all-aromatic polyelectrolyte reinforcements as rheological and morphological modifiers for preparing phosphate geopolymer glass-ceramic composites. Polymer-modified aluminosilicate-phosphate geopolymer resins were prepared by high-shear mixing of a metakaolin powder with 9M phosphoric acid and two all-aromatic, sulfonated polyamides. Polymer loadings between 0.5-2.5 wt. % exhibited gel-like behavior and an increase in the modulus of the geopolymer resin as a function of polymer concentration. The incorporation of a 0.5 wt. % rigid polymer resulted in a three-fold increase in viscosity relative to the control phosphate geopolymer resin. Hardening, dehydration, and crystallization of the geopolymer resins to glass-ceramics was achieved through mold casting, curing at 80 °C for 24 h, and a final heat treatment up to 260 °C. Scanning electron microscopy revealed a decrease in microstructure porosity in the range of 0.78 μm to 0.31 μm for geopolymer plaques containing loadings of 0.5 wt. % rigid polymer. Nano-porosity values of the composites were measured between 10-40 nm using nitrogen adsorption (Brunauer-Emmett-Teller method) and transmission electron microscopy. Nanoindentation studies revealed geopolymer composites with Young's modulus values of 15-24 GPa and hardness values of 1-2 GPa, suggesting an increase in modulus and hardness with polymer incorporation. Additional structural and chemical analyses were performed via thermal gravimetric analysis, Fourier transform infrared radiation, X-ray diffraction, and energy dispersive spectroscopy. This work provides a fundamental understanding of the processing, microstructure, and mechanical behavior of water-soluble, high-performance polyelectrolyte-reinforced geopolymer composites.
Collapse
Affiliation(s)
- John M. Migliore
- Department of Applied Physical Sciences, The University of North Carolina at Chapel Hill, Chapel Hill, NC 27599, USA; (J.M.M.); (T.J.D.)
- Materials and Manufacturing Directorate, Air Force Research Laboratory, AFRL/RXNP, Dayton, OH 45324, USA; (P.H.); (D.L.S.)
- UES, Inc. A BlueHalo Company, Dayton, OH 45432, USA
| | - Patrick Hewitt
- Materials and Manufacturing Directorate, Air Force Research Laboratory, AFRL/RXNP, Dayton, OH 45324, USA; (P.H.); (D.L.S.)
- UES, Inc. A BlueHalo Company, Dayton, OH 45432, USA
| | - Theo J. Dingemans
- Department of Applied Physical Sciences, The University of North Carolina at Chapel Hill, Chapel Hill, NC 27599, USA; (J.M.M.); (T.J.D.)
| | - Davide L. Simone
- Materials and Manufacturing Directorate, Air Force Research Laboratory, AFRL/RXNP, Dayton, OH 45324, USA; (P.H.); (D.L.S.)
| | - William Jacob Monzel
- Materials and Manufacturing Directorate, Air Force Research Laboratory, AFRL/RXNP, Dayton, OH 45324, USA; (P.H.); (D.L.S.)
| |
Collapse
|
2
|
Yu D, Min J, Lin F, Madsen LA. Mechanically and Thermally Robust Gel Electrolytes Built from A Charged Double Helical Polymer. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2024; 36:e2312513. [PMID: 38288908 DOI: 10.1002/adma.202312513] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/21/2023] [Revised: 01/26/2024] [Indexed: 03/16/2024]
Abstract
Polymer electrolytes have received tremendous interest in the development of solid-state batteries, but often fall short in one or more key properties required for practical applications. Herein, a rigid gel polymer electrolyte prepared by immobilizing a liquid mixture of a lithium salt and poly(ethylene glycol) dimethyl ether with only 8 wt% poly(2,2'-disulfonyl-4,4'-benzidine terephthalamide) (PBDT) is reported. The high charge density and rigid double helical structure of PBDT lead to formation of a nanofibrillar structure that endows this electrolyte with stronger mechanical properties, wider temperature window, and higher battery rate capability compared to all other poly(ethylene oxide) (PEO)-based electrolytes. The ion transport mechanism in this rigid polymer electrolyte is systematically studied using multiple complementary techniques. Li/LiFePO4 cells show excellent capacity retention over long-term cycling, with thermal cycling reversibility between ambient temperature and elevated temperatures, demonstrating compelling potential for solid-state batteries targeting fast charging at high temperatures and slower discharging at ambient temperature.
Collapse
Affiliation(s)
- Deyang Yu
- Department of Chemistry and Macromolecules Innovation Institute, Virginia Polytechnic Institute and State University, Blacksburg, VA, 24061, USA
| | - Jungki Min
- Department of Chemistry and Macromolecules Innovation Institute, Virginia Polytechnic Institute and State University, Blacksburg, VA, 24061, USA
| | - Feng Lin
- Department of Chemistry and Macromolecules Innovation Institute, Virginia Polytechnic Institute and State University, Blacksburg, VA, 24061, USA
| | - Louis A Madsen
- Department of Chemistry and Macromolecules Innovation Institute, Virginia Polytechnic Institute and State University, Blacksburg, VA, 24061, USA
| |
Collapse
|
3
|
Wayment LJ, Teat SJ, Huang S, Chen H, Zhang W. Dynamic Entwined Topology in Helical Covalent Polymers Dictated by Competing Supramolecular Interactions. Angew Chem Int Ed Engl 2024; 63:e202403599. [PMID: 38444217 DOI: 10.1002/anie.202403599] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/21/2024] [Revised: 03/02/2024] [Accepted: 03/04/2024] [Indexed: 03/07/2024]
Abstract
Naturally occurring polymeric structures often consist of 1D polymer chains intricately folded and entwined through non-covalent bonds, adopting precise topologies crucial for their functionality. The exploration of crystalline 1D polymers through dynamic covalent chemistry (DCvC) and supramolecular interactions represents a novel approach for developing crystalline polymers. This study shows that sub-angstrom differences in the counter-ion size can lead to various helical covalent polymer (HCP) topologies, including a novel metal-coordination HCP (m-HCP) motif. Single-crystal X-ray diffraction (SCXRD) analysis of HCP-Na revealed that double helical pairs are formed by sodium ions coordinating to spiroborate linkages to form rectangular pores. The double helices are interpenetrated by the unreacted diols coordinating sodium ions. The reticulation of the m-HCP structure was demonstrated by the successful synthesis of HCP-K. Finally, ion-exchange studies were conducted to show the interconversion between HCP structures. This research illustrates how seemingly simple modifications, such as changes in counter-ion size, can significantly influence the polymer topology and determine which supramolecular interactions dominate the crystal lattice.
Collapse
Affiliation(s)
- Lacey J Wayment
- Department of Chemistry, University of Colorado Boulder, Boulder, CO-80309, USA
| | - Simon J Teat
- Advanced Light Source, Lawrence Berkeley National Laboratory, Department of Chemistry, University of California, Berkeley, Berkeley, CA-94720, USA
| | - Shaofeng Huang
- Department of Chemistry, University of Colorado Boulder, Boulder, CO-80309, USA
| | - Hongxuan Chen
- Department of Chemistry, University of Colorado Boulder, Boulder, CO-80309, USA
| | - Wei Zhang
- Department of Chemistry, University of Colorado Boulder, Boulder, CO-80309, USA
| |
Collapse
|
4
|
Xue M, Zhang L, Wang X, Dong Q, Zhu Z, Wang X, Gu Q, Kang F, Li XX, Zhang Q. A Metal-Free Helical Covalent Inorganic Polymer: Preparation, Crystal Structure and Optical Properties. Angew Chem Int Ed Engl 2024; 63:e202315338. [PMID: 38126955 DOI: 10.1002/anie.202315338] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/11/2023] [Revised: 12/12/2023] [Accepted: 12/21/2023] [Indexed: 12/23/2023]
Abstract
Helical morphologies are widely observed in nature, however, it is very challenging to prepare artificial helical polymers. Especially, precisely understanding the structure information of artificial metal-free helical covalent inorganic polymers via single-crystal X-ray diffraction (SCXRD) analysis is rarely explored. Here, we successfully prepare a novel metal-free helical covalent inorganic polymer ({[Te(C6 H5 )2 ] [PO3 (OH)]}n , named CityU-10) by introducing angular anions (HOPO3 2- ) into traditional tellurium-oxygen chains. The dynamic reversibility of the reaction is realized through the introduction of organic tellurium precursor and the slow hydrolysis of polyphosphoric acid. High-quality and large-size single crystals of CityU-10 have been successfully characterized via SCXRD, where the same-handed helical inorganic polymer chains form a pseudo-two-dimensional layer via multiple hydrogen-bonding interactions. The left-handed layers and right-handed layers alternatively stack together through weak hydrogen bonds to form a three-dimensional supramolecular structure. The single crystals of CityU-10 are found to display promising optical properties with a large birefringence. Our results would offer new guidelines for designing and preparing new crystalline covalent polymers through tellurium-based chemistry.
Collapse
Affiliation(s)
- Miaomiao Xue
- Department of Materials Science and Engineering, City University of Hong Kong, Tat Chee Avenue, Kowloon Tong, Hong Kong SAR, P. R. China
| | - Lei Zhang
- Department of Materials Science and Engineering, City University of Hong Kong, Tat Chee Avenue, Kowloon Tong, Hong Kong SAR, P. R. China
| | - Xiang Wang
- Department of Materials Science and Engineering, City University of Hong Kong, Tat Chee Avenue, Kowloon Tong, Hong Kong SAR, P. R. China
| | - Qiang Dong
- Department of Materials Science and Engineering, City University of Hong Kong, Tat Chee Avenue, Kowloon Tong, Hong Kong SAR, P. R. China
| | - Zengkui Zhu
- Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences, Fuzhou, Fujian, 350002, China
| | - Xin Wang
- Department of Materials Science and Engineering, City University of Hong Kong, Tat Chee Avenue, Kowloon Tong, Hong Kong SAR, P. R. China
| | - Qianfeng Gu
- Department of Materials Science and Engineering, City University of Hong Kong, Tat Chee Avenue, Kowloon Tong, Hong Kong SAR, P. R. China
| | - Fangyuan Kang
- Department of Materials Science and Engineering, City University of Hong Kong, Tat Chee Avenue, Kowloon Tong, Hong Kong SAR, P. R. China
| | - Xin-Xiong Li
- Fujian Provincial Key Laboratory of Advanced Inorganic Oxygenated-Materials, College of Chemistry, Fuzhou University, Fuzhou, Fujian, 350108, China
| | - Qichun Zhang
- Department of Materials Science and Engineering, City University of Hong Kong, Tat Chee Avenue, Kowloon Tong, Hong Kong SAR, P. R. China
- Department of Chemistry & Center of Super-Diamond and Advanced Films (COSDAF), City University of Hong Kong, Tat Chee Avenue, Kowloon Tong, Hong Kong SAR, P. R. China
| |
Collapse
|
5
|
Pahan S, Dey S, George G, Mahapatra SP, Puneeth Kumar DRGKR, Gopi HN. Design of Chiral β-Double Helices from γ-Peptide Foldamers. Angew Chem Int Ed Engl 2024; 63:e202316309. [PMID: 38009917 DOI: 10.1002/anie.202316309] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/27/2023] [Revised: 11/24/2023] [Accepted: 11/24/2023] [Indexed: 11/29/2023]
Abstract
Chirality is ubiquitous in nature, and homochirality is manifested in many biomolecules. Although β-double helices are rare in peptides and proteins, they consist of alternating L- and D-amino acids. No peptide double helices with homochiral amino acids have been observed. Here, we report chiral β-double helices constructed from γ-peptides consisting of alternating achiral (E)-α,β-unsaturated 4,4-dimethyl γ-amino acids and chiral (E)-α,β-unsaturated γ-amino acids in both single crystals and in solution. The two independent strands of the same peptide intertwine to form a β-double helix structure, and it is stabilized by inter-strand hydrogen bonds. The peptides with chiral (E)-α,β-unsaturated γ-amino acids derived from α-L-amino acids adopt a (P)-β-double helix, whereas peptides consisting of (E)-α,β-unsaturated γ-amino acids derived from α-D-amino acids adopt an (M)-β-double helix conformation. The circular dichroism (CD) signature of the (P) and (M)-β-double helices and the stability of these peptides at higher temperatures were examined. Furthermore, ion transport studies suggested that these peptides transport ions across membranes. Even though the structural analogy suggests that these new β-double helices are structurally different from those of the α-peptide β-double helices, they retain ion transport activity. The results reported here may open new avenues in the design of functional foldamers.
Collapse
Affiliation(s)
- Saikat Pahan
- Department of Chemistry, Indian Institute of Science Education and Research (IISER), Pune, Dr. Homi Bhabha Road, Pashan, Pune, 411008, India
| | - Sanjit Dey
- Department of Chemistry, Indian Institute of Science Education and Research (IISER), Pune, Dr. Homi Bhabha Road, Pashan, Pune, 411008, India
| | - Gijo George
- Department of Chemistry, Indian Institute of Science Education and Research (IISER), Pune, Dr. Homi Bhabha Road, Pashan, Pune, 411008, India
| | - Souvik Panda Mahapatra
- Department of Chemistry, Indian Institute of Science Education and Research (IISER), Pune, Dr. Homi Bhabha Road, Pashan, Pune, 411008, India
| | - DRGKoppalu R Puneeth Kumar
- Department of Chemistry, Indian Institute of Science Education and Research (IISER), Pune, Dr. Homi Bhabha Road, Pashan, Pune, 411008, India
| | - Hosahudya N Gopi
- Department of Chemistry, Indian Institute of Science Education and Research (IISER), Pune, Dr. Homi Bhabha Road, Pashan, Pune, 411008, India
| |
Collapse
|
6
|
Rai R, Khazeber R, Sureshan KM. Single-Crystal-to-Single-Crystal Topochemical Synthesis of a Collagen-inspired Covalent Helical Polymer. Angew Chem Int Ed Engl 2023; 62:e202315742. [PMID: 37861464 DOI: 10.1002/anie.202315742] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/18/2023] [Revised: 10/20/2023] [Accepted: 10/20/2023] [Indexed: 10/21/2023]
Abstract
There is much demand for crystalline covalent helical polymers. Inspired by the helical structure of collagen, we synthesized a covalent helical polymer wherein the repeating dipeptide Gly-Pro units are connected by triazole linkages. We synthesized an azide and alkyne-modified dipeptide monomer made up of the repeating amino acid sequence of collagen. In its crystals, the monomer molecules aligned in head-to-tail fashion with proximally placed azide and alkyne forming supramolecular helices. At 60 °C, the monomer underwent single-crystal-to-single-crystal (SCSC) topochemical azide-alkyne cycloaddition polymerization, yielding a covalent helical polymer as confirmed by single-crystal X-ray diffraction (SCXRD) analysis. Compared to the monomer crystals, the polymer single-crystals were very strong and showed three-fold increase in Young's modulus, which is higher than collagen, many synthetic polymers and other materials. The crystals of this covalent helical polymer could bear loads as high as 1.5 million times of their own weight without deformation. These crystals could also withstand high compression force and did not disintegrate even at an applied force of 98 kN. Such light-weight strong materials are in demand for various technological applications.
Collapse
Affiliation(s)
- Rishika Rai
- School of Chemistry, Indian Institute of Science Education and Research Thiruvananthapuram Thiruvananthapuram, Kerala, 695551, India
| | - Ravichandran Khazeber
- School of Chemistry, Indian Institute of Science Education and Research Thiruvananthapuram Thiruvananthapuram, Kerala, 695551, India
| | - Kana M Sureshan
- School of Chemistry, Indian Institute of Science Education and Research Thiruvananthapuram Thiruvananthapuram, Kerala, 695551, India
| |
Collapse
|
7
|
Teng B, Mandal PK, Allmendinger L, Douat C, Ferrand Y, Huc I. Controlling aromatic helix dimerization in water by tuning charge repulsions. Chem Sci 2023; 14:11251-11260. [PMID: 37860656 PMCID: PMC10583700 DOI: 10.1039/d3sc02020g] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/19/2023] [Accepted: 09/14/2023] [Indexed: 10/21/2023] Open
Abstract
Several helically folded aromatic oligoamides were designed and synthesized. The sequences were all water-soluble thanks to the charged side chains borne by the monomers. Replacing a few, sometimes only two, charged side chains by neutral methoxy groups was shown to trigger the formation of various aggregates which could be tentatively assigned to head-to-head stacked dimers of single helices, double helical duplexes and a quadruplex, none of which would form in organic solvent with organic-soluble analogues. The nature of the aggregates was supported by concentration and solvent dependent NMR studies, 1H DOSY experiments, mass spectrometry, and X-ray crystallography or energy-minimized models, as well as analogies with earlier studies. The hydrophobic effect appears to be the main driving force for aggregation but it can be finely modulated by the presence or absence of a small number of charges to an extent that had no precedent in aromatic foldamer architectures. These results will serve as a benchmark for future foldamer design in water.
Collapse
Affiliation(s)
- Binhao Teng
- Department of Pharmacy, Ludwig-Maximilians-Universität Butenandtstr. 5-13 81377 München Germany
| | - Pradeep K Mandal
- Department of Pharmacy, Ludwig-Maximilians-Universität Butenandtstr. 5-13 81377 München Germany
| | - Lars Allmendinger
- Department of Pharmacy, Ludwig-Maximilians-Universität Butenandtstr. 5-13 81377 München Germany
| | - Céline Douat
- Department of Pharmacy, Ludwig-Maximilians-Universität Butenandtstr. 5-13 81377 München Germany
| | - Yann Ferrand
- Univ. Bordeaux, CNRS, Bordeaux Institut National Polytechnique CBMN UMR 5248, 2 rue Escarpit 33600 Pessac France
| | - Ivan Huc
- Department of Pharmacy, Ludwig-Maximilians-Universität Butenandtstr. 5-13 81377 München Germany
| |
Collapse
|
8
|
Zhang J, Sun J, Zhao Y, Su Y, Meng X, Yan L, Ma T. Prelithiated rigid polymer with high ionic conductivity as silicon-based anode binder for lithium-ion battery. J Colloid Interface Sci 2023; 649:977-985. [PMID: 37392687 DOI: 10.1016/j.jcis.2023.06.133] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/23/2023] [Accepted: 06/18/2023] [Indexed: 07/03/2023]
Abstract
Silicon-based electrodes suffer from rapid performance degradation derived from a severe volume expansion during cycling in lithium-ion batteries, and using elaborately designed polymer binders is deemed an efficient tactic to tackle the above thorny issues. In this study, a water-soluble rigid-rod poly(2,2'-disulfonyl-4,4'-benzidine terephthalamide) (PBDT) polymer is described and employed as the binder for Si-based electrodes for the first time. The nematic rigid PBDT bundles wrapped around the Si nanoparticles by hydrogen bonding effectively inhibit the volume expansion of the Si and promote the formation of stable solid electrolyte interfaces (SEI). Moreover, the prelithiated PBDT binder with high ionic conductivity (3.2 × 10-4 S cm-1) not only improves the Li-ions transportation behaviors in the electrode but can also partially compensate for the irreversible Li source consumption during SEI formation. Consequently, the cycling stability and initial coulombic efficiency of the Si-based electrodes with the PBDT binder are remarkably enhanced compared to that with the PVDF binder. This work demonstrates the molecular structure and prelithiation strategy of the polymer binder that play a crucial role in improving the performance of Si-based electrodes with high-volume expansion.
Collapse
Affiliation(s)
- Jiaying Zhang
- Graduate School of Life Science and Systems Engineering, Kyushu Institute of Technology, 2-4 Hibikino, Wakamatsu, Kitakyushu, Japan
| | - Jiaze Sun
- College of Materials and Chemistry, China Jiliang University, Hangzhou 310018, PR China
| | - Yue Zhao
- College of Materials and Chemistry, China Jiliang University, Hangzhou 310018, PR China
| | - Yitian Su
- College of Materials and Chemistry, China Jiliang University, Hangzhou 310018, PR China
| | - Xianhe Meng
- College of Materials and Chemistry, China Jiliang University, Hangzhou 310018, PR China
| | - Lijing Yan
- College of Materials and Chemistry, China Jiliang University, Hangzhou 310018, PR China.
| | - Tingli Ma
- Graduate School of Life Science and Systems Engineering, Kyushu Institute of Technology, 2-4 Hibikino, Wakamatsu, Kitakyushu, Japan; College of Materials and Chemistry, China Jiliang University, Hangzhou 310018, PR China.
| |
Collapse
|
9
|
Li K, Wang J, Song Y, Wang Y. Machine learning-guided discovery of ionic polymer electrolytes for lithium metal batteries. Nat Commun 2023; 14:2789. [PMID: 37188717 DOI: 10.1038/s41467-023-38493-7] [Citation(s) in RCA: 6] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/31/2022] [Accepted: 05/04/2023] [Indexed: 05/17/2023] Open
Abstract
As essential components of ionic polymer electrolytes (IPEs), ionic liquids (ILs) with high ionic conductivity and wide electrochemical window are promising candidates to enable safe and high-energy-density lithium metal batteries (LMBs). Here, we describe a machine learning workflow embedded with quantum calculation and graph convolutional neural network to discover potential ILs for IPEs. By selecting subsets of the recommended ILs, combining with a rigid-rod polyelectrolyte and a lithium salt, we develop a series of thin (~50 μm) and robust (>200 MPa) IPE membranes. The Li|IPEs|Li cells exhibit ultrahigh critical-current-density (6 mA cm-2) at 80 °C. The Li|IPEs|LiFePO4 (10.3 mg cm-2) cells deliver outstanding capacity retention in 350 cycles (>96% at 0.5C; >80% at 2C), fast charge/discharge capability (146 mAh g-1 at 3C) and excellent efficiency (>99.92%). This performance is rarely reported by other single-layer polymer electrolytes without any flammable organics for LMBs.
Collapse
Affiliation(s)
- Kai Li
- Department of Macromolecular Science, State Key Laboratory of Molecular Engineering of Polymers, Fudan University, Shanghai, 200438, China
| | - Jifeng Wang
- Department of Macromolecular Science, State Key Laboratory of Molecular Engineering of Polymers, Fudan University, Shanghai, 200438, China
| | - Yuanyuan Song
- Department of Macromolecular Science, State Key Laboratory of Molecular Engineering of Polymers, Fudan University, Shanghai, 200438, China
| | - Ying Wang
- Department of Macromolecular Science, State Key Laboratory of Molecular Engineering of Polymers, Fudan University, Shanghai, 200438, China.
| |
Collapse
|
10
|
Roe WE, Warnock TMC, Knipe PC. A spirocyclic backbone accesses new conformational space in an extended, dipole-stabilized foldamer. Commun Chem 2023; 6:71. [PMID: 37069245 PMCID: PMC10110530 DOI: 10.1038/s42004-023-00868-8] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/14/2023] [Accepted: 03/24/2023] [Indexed: 04/19/2023] Open
Abstract
Most aromatic foldamers adopt uniform secondary structures, offering limited potential for the exploration of conformational space and the formation of tertiary structures. Here we report the incorporation of spiro bis-lactams to allow controlled rotation of the backbone of an iteratively synthesised foldamer. This enables precise control of foldamer shape along two orthogonal directions, likened to the aeronautical yaw and roll axes. XRD, NMR and computational data suggest that homo-oligomers adopt an extended right-handed helix with a pitch of over 30 Å, approximately that of B-DNA. Compatibility with extant foldamers to form hetero-oligomers is demonstrated, allowing greater structural complexity and function in future hybrid foldamer designs.
Collapse
Affiliation(s)
- William Edward Roe
- School of Chemistry and Chemical Engineering, Queen's University Belfast, David Keir Building, Belfast, BT9 5AG, UK
| | - Toyah Mary Catherine Warnock
- School of Chemistry and Chemical Engineering, Queen's University Belfast, David Keir Building, Belfast, BT9 5AG, UK
| | - Peter Clarke Knipe
- School of Chemistry and Chemical Engineering, Queen's University Belfast, David Keir Building, Belfast, BT9 5AG, UK.
| |
Collapse
|
11
|
Abe M, Kametani Y, Uemura T. Fabrication of Double-Stranded Vinyl Polymers Mediated by Coordination Nanochannels. J Am Chem Soc 2023; 145:2448-2454. [PMID: 36656961 DOI: 10.1021/jacs.2c11723] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/21/2023]
Abstract
Although double-stranded structures are commonly found in biopolymers, a general and versatile methodology for fabricating double-stranded synthetic polymers has not yet been developed. Here, we report a new approach for synthesizing double-stranded polymers composed of polystyrene and poly(methyl methacrylate). We conducted crosslinking radical polymerization inside a metal-organic framework (MOF), which had one-dimensional channels with diameters similar to the thickness of two polymer chains. Effective spatial constraint within the MOF pores facilitated highly regulated crosslinking reactions between two polymer chains with extended conformations. Remarkably, the obtained double-stranded polymers were soluble in many organic solvents, even at a high crosslinking ratio (20%), unlike conventional crosslinked polymers. Notably, this stable duplex topology, which was inaccessible using previous methods, endowed the double-stranded vinyl polymers with unusual properties in the solution and bulk states. By designing the properties of the MOF nanochannels, the proposed technique can contribute to the development of a wide range of synthetic polymer duplexes.
Collapse
Affiliation(s)
- Masahiro Abe
- Department of Advanced Materials Science, Graduate School of Frontier Sciences, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8656, Japan
| | - Yuki Kametani
- Institute of Engineering Innovation, School of Engineering, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8656, Japan
| | - Takashi Uemura
- Department of Applied Chemistry, Graduate School of Engineering, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8656, Japan
| |
Collapse
|
12
|
Khazeber R, Sureshan KM. Single-crystal-to-single-crystal translation of a helical supramolecular polymer to a helical covalent polymer. Proc Natl Acad Sci U S A 2022; 119:e2205320119. [PMID: 35858342 PMCID: PMC9303982 DOI: 10.1073/pnas.2205320119] [Citation(s) in RCA: 13] [Impact Index Per Article: 6.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/29/2022] [Accepted: 05/30/2022] [Indexed: 01/16/2023] Open
Abstract
Polymers possessing helical conformation in the solid state are in high demand. We report a helical peptide-polymer via the topochemical ene-azide cycloaddition (TEAC) polymerization. The molecules of the designed Gly-Phe-based dipeptide, decorated with ene and azide, assemble in its crystals as β-sheets and as supramolecular helices in two mutually perpendicular directions. While the NH…O H-bonding facilitates β-sheet-like stacking along one direction, weak CH…N H-bonding between the azide-nitrogen and vinylic-hydrogen of molecules belonging to the adjacent stacks arranges them in a head-to-tail manner as supramolecular helices. In the crystal lattice, the azide and alkene of adjacent molecules in the supramolecular helix are suitably preorganized for their TEAC reaction. The dipeptide underwent regio- and stereospecific polymerization upon mild heating in a single-crystal-to-single-crystal fashion, yielding a triazoline-linked helical covalent polymer that could be characterized by single-crystal X-ray diffraction studies. Upon heating, the triazoline-linked polymer undergoes denitrogenation to aziridine-linked polymer, as evidenced by differential scanning calorimetry, thermogravimetric analysis, and solid-state NMR analyses.
Collapse
Affiliation(s)
- Ravichandran Khazeber
- School of Chemistry, Indian Institute of Science Education and Research Thiruvananthapuram, Kerala-695551, India
| | - Kana M. Sureshan
- School of Chemistry, Indian Institute of Science Education and Research Thiruvananthapuram, Kerala-695551, India
| |
Collapse
|
13
|
Flouda P, Bukharina D, Pierce KJ, Stryutsky AV, Shevchenko VV, Tsukruk VV. Flexible Sustained Ionogels with Ionic Hyperbranched Polymers for Enhanced Ion-Conduction and Energy Storage. ACS APPLIED MATERIALS & INTERFACES 2022; 14:27028-27039. [PMID: 35658086 DOI: 10.1021/acsami.2c04502] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
Flexible and mechanically robust gel-like electrolytes offer enhanced energy storage capabilities, versatility, and safety in batteries and supercapacitors. However, the trade-off between ion conduction and mechanical robustness remains a challenge for these materials. Here, we suggest that the introduction of ionic hyperbranched polymers in structured sustained ionogels will lead to both enhanced ion conduction and mechanical performance because of the hyperbranched polymers' ionically conductive groups and the complementary interfacial interactions with ionic liquids. More specifically, we investigate the effect of hyperbranched polymers with carboxylate terminal groups and imidazolium counterions with various ionic group densities on the properties of ionogels composed of coassembled cellulose nanofibers (CNFs) and cellulose nanocrystals (CNCs) as sustainable open pore frame for ionic liquid immersion. The addition of hyperbranched polymers leads to the formation of highly interconnected openly porous, lightweight, and shape-persistent materials by harnessing hydrogen bonding between the polymers and the CNFs/CNCs "frame". Notably, these materials possess a 2-fold improvement in ionic conductivity combined with many-fold increase in Young's modulus, tensile strength, and toughness, making them comparable to common reinforced nanocomposite materials. Furthermore, the corresponding thin-film gel supercapacitors possess enhanced electrochemical cycling stability upon repeated bending with an 85% capacitance retention after 10 000 cycles, promising new insight in the development of simultaneously conductive and flexible gel electrolytes with sustained performance.
Collapse
Affiliation(s)
- Paraskevi Flouda
- School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332, United States
| | - Daria Bukharina
- School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332, United States
| | - Kellina J Pierce
- School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332, United States
| | - Alexandr V Stryutsky
- Institute of Macromolecular Chemistry of the National Academy of Sciences of Ukraine, Kharkivske Shosse 48, Kyiv 02160, Ukraine
| | - Valery V Shevchenko
- Institute of Macromolecular Chemistry of the National Academy of Sciences of Ukraine, Kharkivske Shosse 48, Kyiv 02160, Ukraine
| | - Vladimir V Tsukruk
- School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332, United States
| |
Collapse
|
14
|
Park KS, Xue Z, Patel BB, An H, Kwok JJ, Kafle P, Chen Q, Shukla D, Diao Y. Chiral emergence in multistep hierarchical assembly of achiral conjugated polymers. Nat Commun 2022; 13:2738. [PMID: 35585050 PMCID: PMC9117306 DOI: 10.1038/s41467-022-30420-6] [Citation(s) in RCA: 11] [Impact Index Per Article: 5.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/21/2021] [Accepted: 04/27/2022] [Indexed: 11/09/2022] Open
Abstract
Intimately connected to the rule of life, chirality remains a long-time fascination in biology, chemistry, physics and materials science. Chiral structures, e.g., nucleic acid and cholesteric phase developed from chiral molecules are common in nature and synthetic soft materials. While it was recently discovered that achiral but bent-core mesogens can also form chiral helices, the assembly of chiral microstructures from achiral polymers has rarely been explored. Here, we reveal chiral emergence from achiral conjugated polymers, in which hierarchical helical structures are developed through a multistep assembly pathway. Upon increasing concentration beyond a threshold volume fraction, dispersed polymer nanofibers form lyotropic liquid crystalline (LC) mesophases with complex, chiral morphologies. Combining imaging, X-ray and spectroscopy techniques with molecular simulations, we demonstrate that this structural evolution arises from torsional polymer molecules which induce multiscale helical assembly, progressing from nano- to micron scale helical structures as the solution concentration increases. This study unveils a previously unknown complex state of matter for conjugated polymers that can pave way to a field of chiral (opto)electronics. We anticipate that hierarchical chiral helical structures can profoundly impact how conjugated polymers interact with light, transport charges, and transduce signals from biomolecular interactions and even give rise to properties unimagined before.
Collapse
Affiliation(s)
- Kyung Sun Park
- Department of Chemical and Biomolecular Engineering, University of Illinois at Urbana-Champaign, 600 S. Mathews Ave., Urbana, IL, 61801, USA
| | - Zhengyuan Xue
- Department of Chemical and Biomolecular Engineering, University of Illinois at Urbana-Champaign, 600 S. Mathews Ave., Urbana, IL, 61801, USA
| | - Bijal B Patel
- Department of Chemical and Biomolecular Engineering, University of Illinois at Urbana-Champaign, 600 S. Mathews Ave., Urbana, IL, 61801, USA
| | - Hyosung An
- Department of Materials Science and Engineering, University of Illinois at Urbana-Champaign, 1304 W. Green St., Urbana, IL, 61801, USA
| | - Justin J Kwok
- Department of Materials Science and Engineering, University of Illinois at Urbana-Champaign, 1304 W. Green St., Urbana, IL, 61801, USA
| | - Prapti Kafle
- Department of Chemical and Biomolecular Engineering, University of Illinois at Urbana-Champaign, 600 S. Mathews Ave., Urbana, IL, 61801, USA
| | - Qian Chen
- Department of Materials Science and Engineering, University of Illinois at Urbana-Champaign, 1304 W. Green St., Urbana, IL, 61801, USA
| | - Diwakar Shukla
- Department of Chemical and Biomolecular Engineering, University of Illinois at Urbana-Champaign, 600 S. Mathews Ave., Urbana, IL, 61801, USA
| | - Ying Diao
- Department of Chemical and Biomolecular Engineering, University of Illinois at Urbana-Champaign, 600 S. Mathews Ave., Urbana, IL, 61801, USA.
- Department of Materials Science and Engineering, University of Illinois at Urbana-Champaign, 1304 W. Green St., Urbana, IL, 61801, USA.
- Beckman Institute, Molecular Science and Engineering, University of Illinois at Urbana-Champaign, 405 N. Mathews Ave., Urbana, IL, 61801, USA.
- Department of Chemistry, University of Illinois at Urbana-Champaign, 505 S. Mathews Ave., Urbana, IL, 61801, USA.
- Materials Research Laboratory, The Grainger College of Engineering, University of Illinois at Urbana-Champaign, 104 S. Goodwin Ave., Urbana, IL, 61801, USA.
| |
Collapse
|
15
|
Du J, Yin H, Zhu H, Wan T, Wang B, Qi H, Lu Y, Dai L, Chen T. Forming a Double-Helix Phase of Single Polymer Chains by the Cooperation between Local Structure and Nonlocal Attraction. PHYSICAL REVIEW LETTERS 2022; 128:197801. [PMID: 35622042 DOI: 10.1103/physrevlett.128.197801] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/11/2021] [Revised: 03/01/2022] [Accepted: 03/25/2022] [Indexed: 06/15/2023]
Abstract
Double-helix structures, such as DNA, are formed in nature to realize many unique functions. Inspired by this, researchers are pursuing strategies to design such structures from polymers. A key question is whether the double helix can be formed from the self-folding of a single polymer chain without specific interactions. Here, using Langevin dynamics simulation and theoretical analysis, we find that a stable double-helix phase can be achieved by the self-folding of single semiflexible polymers as a result of the cooperation between local structure and nonlocal attraction. The critical temperature of double-helix formation approximately follows T^{cri}∼ln(k_{θ}) and T^{cri}∼ln(k_{τ}), where k_{θ} and k_{τ} are the polymer bending and torsion stiffness, respectively. Furthermore, the double helix can exhibit major and minor grooves due to symmetric break for better packing. Our results provide a novel guide to the experimental design of the double helix.
Collapse
Affiliation(s)
- Jiang Du
- College of Chemistry and Materials Science, Northwest University, Xi'an 710127, China
| | - Hongmei Yin
- College of Chemistry and Materials Science, Northwest University, Xi'an 710127, China
| | - Haoqi Zhu
- Department of Physics, City University of Hong Kong, Hong Kong 999077, China
| | - Tiantian Wan
- College of Chemistry and Materials Science, Northwest University, Xi'an 710127, China
| | - Binzhou Wang
- College of Chemistry and Materials Science, Northwest University, Xi'an 710127, China
| | - Hongtao Qi
- College of Chemistry and Materials Science, Northwest University, Xi'an 710127, China
| | - Yanfang Lu
- College of Chemistry and Materials Science, Northwest University, Xi'an 710127, China
| | - Liang Dai
- Department of Physics, City University of Hong Kong, Hong Kong 999077, China
| | - Tao Chen
- College of Chemistry and Materials Science, Northwest University, Xi'an 710127, China
| |
Collapse
|
16
|
Fox RJ, Hegde M, Cole DP, Moore RB, Picken SJ, Dingemans TJ. High-Strength Liquid Crystal Polymer-Graphene Oxide Nanocomposites from Water. ACS APPLIED MATERIALS & INTERFACES 2022; 14:16592-16600. [PMID: 35330991 DOI: 10.1021/acsami.2c00186] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
We report on the morphology and mechanical properties of nanocomposite films derived from aqueous, hybrid liquid crystalline mixtures of rodlike aggregates of a sulfonated, all-aromatic polyamide, poly(2,2'-disulfonyl-4,4'-benzidine terephthalamide) (PBDT), and graphene oxide (GO) platelets. An isothermal step at 200 °C facilitates in situ partial thermal reduction of GO to reduced GO (rGO) in nanocomposite films. X-ray scattering studies reveal that PBDT-rGO nanocomposites exhibit both higher in-plane alignment of PBDT (the order parameter increases from 0.79 to 0.9 at 1.8 vol % rGO) and alignment along the casting direction (from 0.1 to 0.6 at 1.8 vol % rGO). From dynamic mechanical thermal analysis, the interaction between PBDT and rGO causes the β-relaxation activation energy for PBDT to increase with rGO concentration. Modulus mapping of nanocomposites using atomic force microscopy demonstrates enhanced local stiffness, indicating reinforcement. From stress-strain analysis, the average Young's modulus increases from 16 to 37 GPa at 1.8 vol % rGO and the average tensile strength increases from 210 to 640 MPa. Despite polymer alignment along the casting direction, an average transverse tensile strength of 230 MPa is obtained.
Collapse
Affiliation(s)
- Ryan J Fox
- Department of Applied Physical Sciences, University of North Carolina at Chapel Hill, Chapel Hill, North Carolina 27599-3050, United States
| | - Maruti Hegde
- Department of Applied Physical Sciences, University of North Carolina at Chapel Hill, Chapel Hill, North Carolina 27599-3050, United States
| | - Daniel P Cole
- DEVCOM Army Research Laboratory, Aberdeen Proving Ground, Maryland 21005, United States
| | - Robert B Moore
- Department of Chemistry, Macromolecules Innovation Institute, Virginia Tech, Blacksburg, Virginia 24061, United States
| | - Stephen J Picken
- Faculty of Applied Sciences, Delft University of Technology, Van der Maasweg 9, Delft 2629 HZ, The Netherlands
| | - Theo J Dingemans
- Department of Applied Physical Sciences, University of North Carolina at Chapel Hill, Chapel Hill, North Carolina 27599-3050, United States
| |
Collapse
|
17
|
Wang CS, Virgilio N, Carreau PJ, Heuzey MC. Understanding the Effect of Conformational Rigidity on Rheological Behavior and Formation of Polysaccharide-Based Hybrid Hydrogels. Biomacromolecules 2021; 22:4016-4026. [PMID: 34510906 DOI: 10.1021/acs.biomac.1c00803] [Citation(s) in RCA: 20] [Impact Index Per Article: 6.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
The importance of conformational rigidity on macroscopic rheological properties was revealed using two model polysaccharides, namely, xanthan gum and hyaluronic acid. Xanthan gum has a rigid tertiary conformation due to its ordered double-helical structure, and the interactions between the tertiary structures result in the formation of a network/quaternary structure. In comparison, hyaluronic acid possesses a relatively flexible tertiary conformation due to its secondary random coil structure. Xanthan gum exhibits a much stronger shear thinning and more solidlike behavior compared to hyaluronic acid, owing to its network/quaternary structure. The rigid tertiary structure and the presence of a network/quaternary structure also endow xanthan gum with better resistance against environmental changes (e.g., salt and/or urea addition, temperature change) compared to hyaluronic acid. The network/quaternary structure allows xanthan gum to form gels with chitosan via electrostatic interactions when using the vapor-induced gelation technique, which is not possible for hyaluronic acid due to its flexible tertiary conformation under similar conditions.
Collapse
Affiliation(s)
- Chang-Sheng Wang
- Research Center for High Performance Polymer and Composite Systems (CREPEC), Department of Chemical Engineering, Polytechnique Montréal, Montréal, Québec H3C 3A7, Canada
| | - Nick Virgilio
- Research Center for High Performance Polymer and Composite Systems (CREPEC), Department of Chemical Engineering, Polytechnique Montréal, Montréal, Québec H3C 3A7, Canada
| | - Pierre J Carreau
- Research Center for High Performance Polymer and Composite Systems (CREPEC), Department of Chemical Engineering, Polytechnique Montréal, Montréal, Québec H3C 3A7, Canada
| | - Marie-Claude Heuzey
- Research Center for High Performance Polymer and Composite Systems (CREPEC), Department of Chemical Engineering, Polytechnique Montréal, Montréal, Québec H3C 3A7, Canada
| |
Collapse
|
18
|
Wang Y, Zanelotti CJ, Wang X, Kerr R, Jin L, Kan WH, Dingemans TJ, Forsyth M, Madsen LA. Solid-state rigid-rod polymer composite electrolytes with nanocrystalline lithium ion pathways. NATURE MATERIALS 2021; 20:1255-1263. [PMID: 33941912 DOI: 10.1038/s41563-021-00995-4] [Citation(s) in RCA: 48] [Impact Index Per Article: 16.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/30/2020] [Accepted: 03/26/2021] [Indexed: 05/22/2023]
Abstract
A critical challenge for next-generation lithium-based batteries lies in development of electrolytes that enable thermal safety along with the use of high-energy-density electrodes. We describe molecular ionic composite electrolytes based on an aligned liquid crystalline polymer combined with ionic liquids and concentrated Li salt. This high strength (200 MPa) and non-flammable solid electrolyte possesses outstanding Li+ conductivity (1 mS cm-1 at 25 °C) and electrochemical stability (5.6 V versus Li|Li+) while suppressing dendrite growth and exhibiting low interfacial resistance (32 Ω cm2) and overpotentials (≤120 mV at 1 mA cm-2) during Li symmetric cell cycling. A heterogeneous salt doping process modifies a locally ordered polymer-ion assembly to incorporate an inter-grain network filled with defective LiFSI and LiBF4 nanocrystals, strongly enhancing Li+ conduction. This modular material fabrication platform shows promise for safe and high-energy-density energy storage and conversion applications, incorporating the fast transport of ceramic-like conductors with the superior flexibility of polymer electrolytes.
Collapse
Affiliation(s)
- Ying Wang
- Department of Chemistry and Macromolecules Innovation Institute, Virginia Polytechnic Institute and State University, Blacksburg, VA, USA
| | - Curt J Zanelotti
- Department of Chemistry and Macromolecules Innovation Institute, Virginia Polytechnic Institute and State University, Blacksburg, VA, USA
| | - Xiaoen Wang
- Institute for Frontier Materials and ARC Centre of Excellent for Electromaterials Science, Deakin University, Geelong, Victoria, Australia
| | - Robert Kerr
- Institute for Frontier Materials and ARC Centre of Excellent for Electromaterials Science, Deakin University, Geelong, Victoria, Australia
| | - Liyu Jin
- Institute for Frontier Materials and ARC Centre of Excellent for Electromaterials Science, Deakin University, Geelong, Victoria, Australia
| | - Wang Hay Kan
- China Spallation Neutron Source, Chinese Academy of Science, Dongguan, China
| | - Theo J Dingemans
- Department of Applied Physical Sciences, University of North Carolina at Chapel Hill, Chapel Hill, NC, USA
| | - Maria Forsyth
- Institute for Frontier Materials and ARC Centre of Excellent for Electromaterials Science, Deakin University, Geelong, Victoria, Australia
| | - Louis A Madsen
- Department of Chemistry and Macromolecules Innovation Institute, Virginia Polytechnic Institute and State University, Blacksburg, VA, USA.
| |
Collapse
|
19
|
Hu Y, Teat SJ, Gong W, Zhou Z, Jin Y, Chen H, Wu J, Cui Y, Jiang T, Cheng X, Zhang W. Single crystals of mechanically entwined helical covalent polymers. Nat Chem 2021; 13:660-665. [DOI: 10.1038/s41557-021-00686-2] [Citation(s) in RCA: 26] [Impact Index Per Article: 8.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/27/2020] [Accepted: 03/22/2021] [Indexed: 11/09/2022]
|
20
|
Abstract
Solid-state polymer electrolytes and high-concentration liquid electrolytes, such as water-in-salt electrolytes and ionic liquids, are emerging materials to replace the flammable organic electrolytes widely used in industrial lithium-ion batteries. Extensive efforts have been made to understand the ion transport mechanisms and optimize the ion transport properties. This perspective reviews the current understanding of the ion transport and polymer dynamics in liquid and polymer electrolytes, comparing the similarities and differences in the two types of electrolytes. Combining recent experimental and theoretical findings, we attempt to connect and explain ion transport mechanisms in different types of small-molecule and polymer electrolytes from a theoretical perspective, linking the macroscopic transport coefficients to the microscopic, molecular properties such as the solvation environment of the ions, salt concentration, solvent/polymer molecular weight, ion pairing, and correlated ion motion. We emphasize universal features in the ion transport and polymer dynamics by highlighting the relevant time and length scales. Several outstanding questions and anticipated developments for electrolyte design are discussed, including the negative transference number, control of ion transport through precision synthesis, and development of predictive multiscale modeling approaches.
Collapse
Affiliation(s)
- Chang Yun Son
- Division of Chemistry and Chemical Engineering, California Institute of Technology, Pasadena, California 91125, USA
| | - Zhen-Gang Wang
- Division of Chemistry and Chemical Engineering, California Institute of Technology, Pasadena, California 91125, USA
| |
Collapse
|
21
|
Fox RJ, Hegde M, Zanelotti CJ, Kumbhar AS, Samulski ET, Madsen LA, Picken SJ, Dingemans TJ. Irreversible Shear-Activated Gelation of a Liquid Crystalline Polyelectrolyte. ACS Macro Lett 2020; 9:957-963. [PMID: 35648607 DOI: 10.1021/acsmacrolett.0c00168] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Abstract
We report irreversible, shear-activated gelation in liquid crystalline solutions of a rigid polyelectrolyte that forms rodlike assemblies (rods) in salt-free solution. At rest, the liquid crystalline solutions are kinetically stable against gelation and exhibit low viscosities. Under steady shear at, or above, a critical shear rate, a physically cross-linked, nematic gel network forms due to linear growth and branching of the rods. Above a critical shear rate, the time scale of gelation can be tuned from hours to nearly instantaneously by varying the shear rate and solution concentration. The shear-activated gels are distinct in their structure and rheological properties from thermoreversible gels. At a fixed concentration, the induction time prior to gelation decreases exponentially with the shear rate. This result indicates that shear-activated thermalization of the electrostatically stabilized rods overcomes the energy barrier for rod-rod contact, enabling rod fusion and subsequent irreversible network formation.
Collapse
Affiliation(s)
- Ryan J Fox
- Department of Applied Physical Sciences, University of North Carolina at Chapel Hill, 121 South Road, Chapel Hill, North Carolina 27599-3050, United States
| | - Maruti Hegde
- Department of Applied Physical Sciences, University of North Carolina at Chapel Hill, 121 South Road, Chapel Hill, North Carolina 27599-3050, United States
| | - Curt J Zanelotti
- Department of Chemistry and Macromolecules Innovation Institute, Virginia Polytechnic Institute and State University, Blacksburg, Virginia 24060, United States
| | - Amar S Kumbhar
- Chapel Hill Analytical and Nanofabrication Laboratory, University of North Carolina at Chapel Hill, 121 South Road, Chapel Hill, North Carolina 27599-3050, United States
| | - Edward T Samulski
- Department of Applied Physical Sciences, University of North Carolina at Chapel Hill, 121 South Road, Chapel Hill, North Carolina 27599-3050, United States
| | - Louis A Madsen
- Department of Chemistry and Macromolecules Innovation Institute, Virginia Polytechnic Institute and State University, Blacksburg, Virginia 24060, United States
| | - Stephen J Picken
- Faculty of Applied Sciences, Delft University of Technology, Van der Maasweg 9, 2629 HZ, Delft, The Netherlands
| | - Theo J Dingemans
- Department of Applied Physical Sciences, University of North Carolina at Chapel Hill, 121 South Road, Chapel Hill, North Carolina 27599-3050, United States
| |
Collapse
|
22
|
Ion Charge Influence on the Molecular Structure of Polyethylene Terephthalate Films after Irradiation with Swift Heavy Ions. CRYSTALS 2020. [DOI: 10.3390/cryst10060479] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
We report here experimental results investigating the influence of the initial swift heavy ion charge on the structure of polyethylene terephthalate (PET) film after irradiation, using a structurally sensitive X-ray diffraction method. Kr ions with an energy of 100 MeV and charges of 13+, 14+, and 15+ were each used at irradiation fluences of 5 × 1010, 7.5 × 1010, 1 × 1011, 2.5 × 1011 and 5 × 1011 ions/cm2. At constant energy and irradiation fluence, the post-irradiation structural changes in PET film show a clear dependence on the initial ion charge. As either the fluence or ion charge increase, the latent tracks begin to overlap, leading to cross-linking of PET chain molecules to form rotational isomers (rotamers). We use the fluence corresponding to the onset of overlapping to estimate the size of latent tracks for different ion charges. At the highest fluences, the latent tracks become entirely overlapped, and the interchain cross-linking extends throughout the whole film. Since this cross-linking is due to the dipole–dipole interaction of subunits of repeat units of PET chain molecules, it is reversible, in contrast to the well-known chemical cross-linking of polymer chain molecules under irradiation.
Collapse
|
23
|
Induced Spirals in Polyethylene Terephthalate Films Irradiated with Ar Ions with an Energy of 70 MeV. CRYSTALS 2020. [DOI: 10.3390/cryst10060427] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
Abstract
This paper presents the results of a study of the ordering in polyethylene terephthalate (PET) film induced by Ar8+ ions with an irradiation fluence of 2 × 1012 ions/cm2, and of the temporal stability of the induced ordering in the irradiated sample, over a three month period. Immediately after irradiation, sharp new reflections not seen at lower fluences were observed in X-ray diffraction patterns, with angular positions of 2 θ = 9–10° and 19° and variable azimuthal intensities. X-ray reflections, previously observed at lower fluences, were also seen: at 2 θ = 26° and 23°, associated with PET crystallites, and at 2 θ = 5–12°, associated with induced ordering in the amorphous zone. Aging of the irradiated sample led to significant growth of the ordering region in the amorphous zone for angles up to 2 θ < 15°, as well as to dissipation and blurring of the new diffraction reflections at 2 θ = 9–10° and 2 θ = 19° and the formation of a new diffraction ring reflection in the range 2 θ = 11–16°. The azimuthal distribution of diffraction reflection intensities immediately after irradiation displays a clear oblique cross located predominantly along lines at angles of π/4 with respect to the direction of the texture of the PET film, indicating the formation of spiral structures based on the molecular strands of PET. Our experimental results lead us to conclude that the formation of coherent scattering areas in the amorphous region at 2 θ < 15° is due to intra-chain rotations of benzene-carboxyl subunits of repeat units of the PET chain molecules interacting with the residual electric field of a single latent track; whereas the formation of spiral structures is due to the inter-chain interaction of these preordered asymmetric subunits under the influence of the electric fields from overlapping latent tracks.
Collapse
|
24
|
Fox RJ, Forest MG, Picken SJ, Dingemans TJ. Observation of transition cascades in sheared liquid crystalline polymers. SOFT MATTER 2020; 16:3891-3901. [PMID: 32242188 DOI: 10.1039/d0sm00275e] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
We report on the shear rheology of liquid crystalline solutions composed of charged, rodlike polymers that form supramolecular assemblies dispersed in water. Under steady shear, we observe shear thickening behavior, followed by a hesitation in the viscosity accompanied by an extremely narrow range of negative first normal stress difference. The Peclet number (Pe, shear rate normalized by rod rotational diffusivity) for the onset of shear thickening is in agreement with previous, high-resolution numerical simulations of the Doi-Edwards-Hess kinetic theory. We interrogate these dynamic responses through shear step-down experiments, revealing a complex evolution of transient responses. Detailed analysis of the stress transients provides compelling evidence that the principal axis of the rod orientational distribution, the nematic director, undergoes a cascade of transitions and coexistence of periodic states known as kayaking, tumbling, and wagging, before transitioning to steady flow alignment above a critical shear rate.
Collapse
Affiliation(s)
- Ryan J Fox
- Department of Applied Physical Sciences, University of North Carolina at Chapel Hill, Chapel Hill, NC 27599-3050, USA.
| | - M Gregory Forest
- Department of Applied Physical Sciences, University of North Carolina at Chapel Hill, Chapel Hill, NC 27599-3050, USA. and Department of Mathematics, University of North Carolina at Chapel Hill, Chapel Hill, NC 27599-3250, USA
| | - Stephen J Picken
- Faculty of Applied Sciences, Delft University of Technology, Van der Maasweg 9, 2629 HZ Delft, The Netherlands
| | - Theo J Dingemans
- Department of Applied Physical Sciences, University of North Carolina at Chapel Hill, Chapel Hill, NC 27599-3050, USA.
| |
Collapse
|
25
|
Bostwick JE, Zanelotti CJ, Iacob C, Korovich AG, Madsen LA, Colby RH. Ion Transport and Mechanical Properties of Non-Crystallizable Molecular Ionic Composite Electrolytes. Macromolecules 2020. [DOI: 10.1021/acs.macromol.9b02125] [Citation(s) in RCA: 16] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/19/2022]
Affiliation(s)
- Joshua E. Bostwick
- Department of Materials Science and Engineering, Pennsylvania State University, University Park, Pennsylvania 16802, United States
| | - Curt J. Zanelotti
- Department of Chemistry and Macromolecules Innovation Institute, Virginia Tech, Blacksburg, Virginia 24061, United States
| | - Ciprian Iacob
- National Research and Development Institute for Cryogenic and Isotopic Technologies, ICSI, Rm. Valcea 240050, Romania
- Institute of Chemical Technology and Polymer Chemistry, Karlsruhe Institute of Technology (KIT), 76131 Karlsruhe, Germany
| | - Andrew G. Korovich
- Department of Chemistry and Macromolecules Innovation Institute, Virginia Tech, Blacksburg, Virginia 24061, United States
| | - Louis A. Madsen
- Department of Chemistry and Macromolecules Innovation Institute, Virginia Tech, Blacksburg, Virginia 24061, United States
| | - Ralph H. Colby
- Department of Materials Science and Engineering, Pennsylvania State University, University Park, Pennsylvania 16802, United States
| |
Collapse
|
26
|
Fox RJ, Yu D, Hegde M, Kumbhar AS, Madsen LA, Dingemans TJ. Nanofibrillar Ionic Polymer Composites Enable High-Modulus Ion-Conducting Membranes. ACS APPLIED MATERIALS & INTERFACES 2019; 11:40551-40563. [PMID: 31507155 DOI: 10.1021/acsami.9b10921] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Polymer electrolyte membranes (PEMs) with high volume fractions of ionic liquids (IL) and high modulus show promise for enabling next-generation gas separations, and electrochemical energy storage and conversion applications. Herein, we present a conductive polymer-IL composite based on a sulfonated all-aromatic polyamide (sulfo-aramid, PBDT) and a model IL, which we term a PBDT-IL composite. The polymer forms glassy and high-aspect-ratio hierarchical nanofibrils, which enable fabrication of PEMs with both high volume fractions of IL and high elastic modulus. We report direct evidence for nanofibrillar networks that serve as matrices for dispersed ILs using atomic force microscopy and small- and wide-angle X-ray scattering. These supramolecular nanofibrils form through myriad noncovalent interactions to produce a physically cross-linked glassy network, which boasts the best combination of room-temperature modulus (0.1-2 GPa) and ionic conductivity (8-4 mS cm-1) of any polymer-IL electrolyte reported to date. The ultrahigh thermomechanical properties of our PBDT-IL composites provide high moduli (∼1 GPa) at temperatures up to 200 °C, enabling a wide device operation window with stable mechanical properties. Together, the high-performance nature of sulfo-aramids in concert with the inherent properties of ILs imparts PBDT-IL composites with nonflammability and thermal stability up to 350 °C. Thus, nanofibrillar ionic networks based on sulfo-aramids and ILs represent a new design paradigm affording PEMs with exceptionally high moduli at exceedingly low polymer concentrations. This new design strategy will drive the development of new high-performance conductive membranes that can be used for the design of gas separation membranes and in electrochemical applications, such as fuel cells and Li-metal batteries.
Collapse
Affiliation(s)
| | - Deyang Yu
- Department of Chemistry and Macromolecules Innovation Institute , Virginia Polytechnic Institute and State University , Blacksburg , Virginia 24061 , United States
| | | | | | - Louis A Madsen
- Department of Chemistry and Macromolecules Innovation Institute , Virginia Polytechnic Institute and State University , Blacksburg , Virginia 24061 , United States
| | | |
Collapse
|