Conformational manipulation of scale-up prepared single-chain polymeric nanogels for multiscale regulation of cells

Dual-reactive single-chain polymer nanoparticles for orthogonal functionalization through active ester and click chemistry

Glucose has been extensively studied as a targeting ligand on nanoparticles for biomedical nanoparticles. A promising nanocarrier platform are single-chain polymer nanoparticles (SCNPs). SCNPs are well-defined 5-20 nm semi-flexible nano-objects, formed by intramolecularly crosslinked linear polymers. Functionality can be incorporated by introducing labile pentafluorophenyl (PFP) esters in the polymer backbone, which can be readily substituted by functional amine-ligands. However, not all ligands are compatible with PFP-chemistry, requiring different ligation strategies for increasing versatility of surface functionalization. Here, we combine active PFP-ester chemistry with copper(I)-catalyzed azide alkyne cycloaddition (CuAAC) click chemistry to yield dual-reactive SCNPs. First, the SCNPs are functionalized with increasing amounts of 1-amino-3-butyne groups through PFP-chemistry, leading to a range of butyne-SCNPs with increasing terminal alkyne-density. Subsequently, 3-azido-propylglucose is conjugated through the glucose C1- or C6-position by CuAAC click chemistry, yielding two sets of glyco-SCNPs. Cellular uptake is evaluated in HeLa cancer cells, revealing increased uptake upon higher glucose-surface density, with no apparent positional dependance. The general conjugation strategy proposed here can be readily extended to incorporate a wide variety of functional molecules to create vast libraries of multifunctional SCNPs.

Rapidly damping hydrogels engineered through molecular friction

Hydrogels capable of swift mechanical energy dissipation hold promise for a range of applications including impact protection, shock absorption, and enhanced damage resistance. Traditional energy absorption in such materials typically relies on viscoelastic mechanisms, involving sacrificial bond breakage, yet often suffers from prolonged recovery times. Here, we introduce a hydrogel designed for friction-based damping. This hydrogel features an internal structure that facilitates the motion of a chain walker within its network, effectively dissipating mechanical stress. The hydrogel network architecture allows for rapid restoration of its damping capacity, often within seconds, ensuring swift material recovery post-deformation. We further demonstrate that this hydrogel can significantly shield encapsulated cells from mechanical trauma under repetitive compression, owing to its proficient energy damping and rapid rebound characteristics. Therefore, this hydrogel has potential for dynamic load applications like artificial muscles and synthetic cartilage, expanding the use of hydrogel dampers in biomechanics and related areas.

Förster resonance energy transfer within single chain nanoparticles

Single chain nanoparticles (SCNPs) are a highly versatile polymer architecture consisting of single polymer chains that are intramolecularly crosslinked. Currently, SCNPs are discussed as powerful macromolecular architectures for catalysis, delivery and sensors. Herein, we introduce a methodology based on Förster Resonance Energy Transfer (FRET) to evidence the folding of single polymer chains into SCNPs via fluorescence readout. We initially introduce a molecular FRET pair based on a bimane and nitrobenzoxadiazole (NBD) moiety and study its fluorescence properties in different solvents. We subsequently construct a low dispersity polymer chain carrying NBD units, while exploiting the bimane units for intramolecular chain collapse. Upon chain collapse and SCNP formation - thus bringing bimane and NBD units into close proximity - the SCNPs report their folded state by a strong and unambiguous FRET fluorescence signal. The herein introduced reporting of the folding state of SCNPs solely relies on an optical readout, opening avenues to monitoring SCNP folding without recourse to complex analytical methodologies.

Effects of Drug Conjugation on the Biological Activity of Single-Chain Nanoparticles

The field of single-chain nanoparticles (SCNPs) continues to mature, and an increasing range of reports have emerged that explore the application of these small nanoparticles. A key application for SCNPs is in the field of drug delivery, and recent work suggests that SCNPs can be readily internalized by cells. However, limited attention has been directed to the delivery of small-molecule drugs using SCNPs. Moreover, studies on the physicochemical effects of drug loading on SCNP performance is so far missing, despite the accepted view that such small nanoparticles should be significantly affected by the drug loading content. To address this gap, we prepared a library of SCNPs bearing different amounts of a covalently conjugated therapeutic drug-sulfasalazine (SSZ). We evaluated the impact of the conjugated drug loading on both the synthesis and biological activity of SCNPs on pancreatic cancer cells (AsPC-1). Our results reveal that covalent drug conjugation to the side chains of the SCNP polymer precursor interferes with chain collapse and cross-linking, which demands optimization of reaction conditions to reach high degrees of cross-linking efficiencies. Small-angle neutron scattering and diffusion-ordered spectroscopy nuclear magnetic resonance (DOSY NMR) analyses reveal that SCNPs with a higher drug loading display larger sizes and looser structures, as well as increased hydrophobicity associated with a higher SSZ content. Increased SSZ loading led to reduced cellular uptake when assessed in vitro, whereby SCNP aggregation on the surface of AsPC-1 cells led to reduced toxicity. This work highlights the effects of drug loading on the drug delivery efficiency and biological behavior of SCNPs.

Exploring the Potential of Nanogels: From Drug Carriers to Radiopharmaceutical Agents

Nanogels open up access to a wide range of applications and offer among others hopeful approaches for use in the field of biomedicine. This review provides a brief overview of current developments of nanogels in general, particularly in the fields of drug delivery, therapeutic applications, tissue engineering, and sensor systems. Specifically, cyclodextrin (CD)-based nanogels are important because they have exceptional complexation properties and are highly biocompatible. Nanogels as a whole and CD-based nanogels in particular can be customized in a wide range of sizes and equipped with a desired surface charge as well as containing additional molecules inside and outside, such as dyes, solubility-mediating groups or even biological vector molecules for pharmaceutical targeting. Currently, biological investigations are mainly carried out in vitro, but more and more in vivo applications are gaining importance. Modern molecular imaging methods are increasingly being used for the latter. Due to an extremely high sensitivity and the possibility of obtaining quantitative data on pharmacokinetic and pharmacodynamic properties, nuclear methods such as single photon emission computed tomography (SPECT) and positron emission tomography (PET) using radiolabeled compounds are particularly suitable here. The use of radiolabeled nanogels for imaging, but also for therapy, is being discussed.

Matrix mechanics regulate the polarization state of bone marrow-derived neutrophils through the JAK1/STAT3 signaling pathway

Matrix mechanics regulate essential cell behaviors through mechanotransduction, and as one of its most important elements, substrate stiffness was reported to regulate cell functions such as viability, communication, migration, and differentiation. Neutrophils (Neus) predominate the early inflammatory response and initiate regeneration. The activation of Neus can be regulated by physical cues; however, the functional alterations of Neus by substrate stiffness remain unknown, which is critical in determining the outcomes of engineered tissue mimics. Herein, a three-dimensional (3D) culture system made of hydrogels was developed to explore the effects of varying stiffnesses (1.5, 2.6, and 5.7 kPa) on the states of Neus. Neus showed better cell integrity and viability in the 3D system. Moreover, it was shown that the stiffer matrix tended to induce Neus toward an anti-inflammatory phenotype (N2) with less adhesion molecule expression, less reactive oxygen species (ROS) production, and more anti-inflammatory cytokine secretion. Additionally, the aortic ring assay indicated that Neus cultured in a stiffer matrix significantly increased vascular sprouting. RNA sequencing showed that a stiffer matrix could significantly activate JAK1/STAT3 signaling in Neus and the inhibition of JAK1 ablated the stiffness-dependent increase in the expression of CD182 (an N2 marker). Taken together, these results demonstrate that a stiffer matrix promotes Neus to shift to the N2 phenotype, which was regulated by JAK1/STAT3 pathway. This study lays the groundwork for further research on fabricating engineered tissue mimics, which may provide more treatment options for ischemic diseases and bone defects. STATEMENT OF SIGNIFICANCE.

Visible-Light-Induced Control over Reversible Single-Chain Nanoparticle Folding

We introduce a class of single-chain nanoparticles (SCNPs) that respond to visible light (λmax =415 nm) with complete unfolding from their compact structure into linear chain analogues. The initial folding is achieved by a simple esterification reaction of the polymer backbone constituted of acrylic acid and polyethylene glycol carrying monomer units, introducing bimane moieties, which allow for the photochemical unfolding, reversing the ester-bond formation. The compaction and the light driven unfolding proceed cleanly and are readily followed by size exclusion chromatography (SEC) and diffusion ordered NMR spectroscopy (DOSY), monitoring the change in the hydrodynamic radius (RH ). Importantly, the folding reaction and the light-induced unfolding are reversible, supported by the high conversion of the photo cleavage. As the unfolding reaction occurs in aqueous systems, the system holds promise for controlling the unfolding of SCNPs in biological environments.

Design and fabrication of intracellular therapeutic cargo delivery systems based on nanomaterials: current status and future perspectives

Intracellular cargo delivery, the introduction of small molecules, proteins, and nucleic acids into a specific targeted site in a biological system, is an important strategy for deciphering cell function, directing cell fate, and reprogramming cell behavior. With the advancement of nanotechnology, many researchers use nanoparticles (NPs) to break through biological barriers to achieving efficient targeted delivery in biological systems, bringing a new way to realize efficient targeted drug delivery in biological systems. With a similar size to many biomolecules, NPs possess excellent physical and chemical properties and a certain targeting ability after functional modification on the surface of NPs. Currently, intracellular cargo delivery based on NPs has emerged as an important strategy for genome editing regimens and cell therapy. Although researchers can successfully deliver NPs into biological systems, many of them are delivered very inefficiently and are not specifically targeted. Hence, the development of efficient, target-capable, and safe nanoscale drug delivery systems to deliver therapeutic substances to cells or organs is a major challenge today. In this review, on the basis of describing the research overview and classification of NPs, we focused on the current research status of intracellular cargo delivery based on NPs in biological systems, and discuss the current problems and challenges in the delivery process of NPs in biological systems.

Hierarchical hydrogel scaffolds with a clustered and oriented structure

Hydrogel scaffolds play a critical role in tissue engineering due to their hydrophilic network structure and good biocompatibility. Constructing anisotropic scaffolds geometrically similar to injured tissues is conducive to promoting the generation of tissue and organ equivalents, or to guiding and enhancing the regeneration of injured tissues. In this study, we developed polyvinyl alcohol (PVA)/alginate hierarchical hydrogel scaffolds with a clustered and oriented structure using a method that combines directional freezing and drying under stretching. Our hydrogel scaffolds with an adjustable modulus (50 kPa-20 MPa) can match different types of injured tissues. The clustered and oriented structure successfully guided the alignment and orientation of fibroblasts and chondrocytes. This work provides a new idea for constructing hydrogels with hierarchical and anisotropic microstructures, which have promising applications in tissue regeneration.

Single-chain polymer nanoparticles in biomedical applications

Single-chain polymer nanoparticles (SCNPs) are a well-defined and uniquely sized class of polymer nanoparticles. The advances in polymer science over the past decades have enabled the development of a variety of intramolecular crosslinking systems, leading to particles in the 5-20 nm size regime. Which is aligned with the size regime of proteins and therefore making SCNPs an interesting class of NPs for biomedical applications. The high modularity of SCNP design and the ease of their functionalization have led to growing research interest. In this review, we describe different crosslinking systems, as well as the preparation of functional SCNPs and the variety of biomedical applications that have been explored.

(Controlled) Free radical (co)polymerization of multivinyl monomers: strategies, topological structures and biomedical applications

Free radical (co)polymerization (FRP/FRcP) of multivinyl monomers (MVMs) has emerged as a powerful strategy for the synthesis of chemically and topologically complex polymers due to its unique reaction kinetics, which enables the preparation of polymers with multiple functional groups and novel macromolecular structures. However, conventional FRP/FRcP of MVMs inevitably leads to insoluble crosslinked materials. Therefore, the development of advanced strategies for the controlled polymerization of MVMs is essential for the preparation of chemically and topologically complex polymers. In this review, we introduce the gelation mechanism of conventional FRP of MVMs and present the strategies of controlled polymerization of MVMs for the preparation of chemically and topologically complex polymers. We also discuss polymers with unique topologies synthesized by controlled polymerization of MVMs, such as crosslinked networks, (hyper)branched, star, cyclic, and single-chain cyclized/knotted structures. Finally, biomedical applications of various advanced polymeric materials prepared by controlled polymerization of MVMs are highlighted and the challenges is this field are discussed.

Osmotic Pressure as Driving Force for Reducing the Size of Nanoparticles in Emulsions

We describe here a method to decrease particle size of nanoparticles synthesized by miniemulsion polymerization. Small nanoparticles or nanocapsules were obtained by generating an osmotic pressure to induce the diffusion of monomer molecules from the dispersed phase of a miniemulsion before polymerization to an upper oil layer. The size reduction is dependent on the difference in concentration of monomer in the dispersed phase and in the upper oil layer and on the solubility of the monomer in water. By labeling the emulsion droplets with a copolymer of stearyl methacrylate and a polymerizable dye, we demonstrated that the migration of the monomer to the upper hexadecane layer relied on molecular diffusion rather than diffusion of monomer droplets to the oil layer. Moreover, surface tension measurements confirmed that the emulsions were still in the miniemulsion regime and not in the microemulsion regime. The particle size can be tuned by controlling the duration during which the miniemulsion stayed in contact with the hexadecane layer, the interfacial area between the miniemulsion and the hexadecane layer and by the concentration of surfactant. Our method was applied to reduce the size of polystyrene and poly(methyl methacrylate) nanoparticles, nanocapsules of a copolymer of styrene and methyl methacrylic acid, and silica nanocapsules. This work demonstrated that a successful reduction of nanoparticle size in the miniemulsion process can be achieved without using excess amounts of surfactant. The method relies on building osmotic pressure in oil droplets dispersed in water which acts as semipermeable membrane.

Bilayer Hydrogels with Low Friction and High Load-Bearing Capacity by Mimicking the Oriented Hierarchical Structure of Cartilage

Natural articular cartilages exhibit extraordinary lubricating properties and excellent load-bearing capacity based on their penetrated surface lubricated biomacromolecules and gradient-oriented hierarchical structure. Hydrogels are considered as the most promising cartilage replacement materials due to their excellent flexibility, good biocompatibility, and low friction coefficient. However, the construction of high-strength, low-friction hydrogels to mimic cartilage is still a great challenge. Here, inspired by the structure and functions of natural articular cartilage, anisotropic hydrogels with horizontal and vertical orientation structure were constructed layer by layer and bonded with each other, successfully developing a bilayer oriented heterogeneous hydrogel with a high load-bearing capacity, low friction, and excellent fatigue resistance. The bilayer hydrogel exhibited a high compressive strength of 5.21 ± 0.45 MPa and a compressive modulus of 4.06 ± 0.31 MPa due to the enhancement mechanism of the anisotropic structure within the bottom anisotropic hydrogel. Moreover, based on the synergistic effect of the high load-bearing capacity of the bottom layer and the lubrication of the surface layer, the bilayer hydrogel possesses excellent biotribological properties in hard/soft (0.032) and soft/soft (0.028) contact, which is close to that of natural cartilage. It is worth noting that the bilayer oriented heterogeneous hydrogel is able to withstand repeated loading without fatigue crack. Therefore, this work could open up a new avenue for constructing cartilage-like materials with both high strength and low friction.

Dually stimulative single-chain polymeric nano lock with dynamic ligands for sensitive detection of circulating tumor cells

Circulating tumor cells (CTCs) are important markers for cancer diagnosis and monitoring. However, CTCs detection remains challenging due to their scarcity, where most of the detection methods are compromised by the loss of CTCs in pre-enrichment, and by the lack of universal antibodies for capturing different kinds of cancer cells. Herein, we report a single-chain based nano lock (SCNL) polymer incorporating dually stimulative dynamic ligands that can bind with a broad spectrum of cancer cells and CTCs overexpressing sialic acid (SA) with high sensitivity and selectivity. The high sensitivity is realized by the polymeric single chain structure and the multi-valent functional moieties, which improve the accessibility and binding stability between the target cells and the SCNL. The highly selective targeting of cancer cells is achieved by the dynamic and dually stimulative nano lock structures, which can be unlocked and functionalized upon simultaneous exposure to overexpressed SA and acidic microenvironment. We applied the SCNL to detecting cancer cells and CTCs in clinical samples, where the detection threshold of SCNL reached 4 cells/mL. Besides CTCs enumeration, the SCNL approach could also be extended to metastasis assessment through monitoring the expressing level of surface SA on cancer cells.

Polymer–Metal Composite Healthcare Materials: From Nano to Device Scale

Metals have been investigated as biomaterials for a wide range of medical applications. At nanoscale, some metals, such as gold nanoparticles, exhibit plasmonics, which have motivated researchers’ focus on biosensor development. At the device level, some metals, such as titanium, exhibit good physical properties, which could allow them to act as biomedical implants for physical support. Despite these attractive features, the non-specific delivery of metallic nanoparticles and poor tissue–device compatibility have greatly limited their performance. This review aims to illustrate the interplay between polymers and metals, and to highlight the pivotal role of polymer–metal composite/nanocomposite healthcare materials in different biomedical applications. Here, we revisit the recent plasmonic engineered platforms for biomolecules detection in cell-free samples and highlight updated nanocomposite design for (1) intracellular RNA detection, (2) photothermal therapy, and (3) nanomedicine for neurodegenerative diseases, as selected significant live cell–interactive biomedical applications. At the device scale, the rational design of polymer–metallic medical devices is of importance for dental and cardiovascular implantation to overcome the poor physical load transfer between tissues and devices, as well as implant compatibility under a dynamic fluidic environment, respectively. Finally, we conclude the treatment of these innovative polymer–metal biomedical composite designs and provide a future perspective on the aforementioned research areas.

Nanostructured Lipid Carriers-Hydrogels System for Drug Delivery: Nanohybrid Technology Perspective

Advanced hybrid component development in nanotechnology provides superior functionality in the application of scientific knowledge for the drug delivery industry. The purpose of this paper is to review important nanohybrid perspectives in drug delivery between nanostructured lipid carriers (NLC) and hydrogel systems. The hybrid system may result in the enhancement of each component's synergistic properties in the mechanical strength of the hydrogel and concomitantly decrease aggregation of the NLC. The significant progress in nanostructured lipid carriers-hydrogels is reviewed here, with an emphasis on their preparation, potential applications, advantages, and underlying issues associated with these exciting materials.

Cytosolic Delivery of Single-Chain Polymer Nanoparticles

Cytosolic delivery of therapeutic agents is key to improving their efficacy, as the therapeutics are primarily active in specific organelles. Single-chain polymer nanoparticles (SCNPs) are a promising nanocarrier platform in biomedical applications due to their unique size range of 5-20 nm, modularity, and ease of functionalization. However, cytosolic delivery of SCNPs remains challenging. Here, we report the synthesis of active ester-functional SCNPs of approximately 10 nm via intramolecular thiol-Michael addition cross-linking and their functionalization with increasing amounts of tertiary amines 0 to 60 mol % to obtain SCNPs with increasing positive surface charges. No significant cytotoxicity was detected in bEND.3 cells for the SCNPs, except when SCNPs with high amounts of tertiary amines were incubated over prolonged periods of time at high concentrations. Cellular uptake of the SCNPs was analyzed, presenting different uptake behavior depending on the degree of functionalization. Confocal microscopy revealed successful cytosolic delivery of SCNPs with high degrees of functionalization (45%, 60%), while SCNPs with low amounts (0% to 30%) of tertiary amines showed high degrees of colocalization with lysosomes. This work presents a strategy to direct the intracellular location of SCNPs by controlled surface modification to improve intracellular targeting for biomedical applications.

Interfacing Live Cells with Surfaces: A Concurrent Control Technique for Quantifying Surface Ligand Activity

Surface ligand activity is a key design parameter for successfully interfacing surfaces with cells─whether in the context of in vitro investigations for understanding cellular signaling pathways or more applied applications in drug delivery and medical implants. Unlike other crucial surface parameters, such as stiffness and roughness, surface ligand activity is typically based on a set of assumptions rather than directly measured, giving rise to interpretations of cell adhesion that can vary with the assumptions made. To fill this void, we have developed a concurrent control technique for directly characterizing in vitro ligand surface activity. Pairs of gold-coated glass chips were biofunctionalized with RGD ligand in a parallel workflow: one chip for in vitro applications and the other for surface plasmon resonance (SPR)-based RGD activity characterization. Recombinant α_Vβ₃ integrins were injected over the SPR chip surface as mimics of the cellular-membrane-bound receptors and the resulting binding kinetics parameterized to quantify surface ligand activity. These activity measurements were correlated with cell morphological features, measured by interfacing MDA-MB-231 cells with the in vitro chip surfaces on the live cell microscope. We demonstrate how the interpretation of a cell phenotype based on direct activity measurements can vary markedly from interpretations based on assumed activity. The SPR concurrent control approach has multiple advantages due to the fact that SPR is a standardized technique and has the sensitivity to measure ligand activity across the most relevant range of extracellular surface densities, while the in vitro chip design can be used with all commonly used light microscopy modalities (e.g., phase contrast, DIC, and fluorescence) so that a wide range of phenotypic and molecular markers can be correlated to the ligand surface activity.

Role of structural specificity of ZnO particles in preserving functionality of proteins in their corona

Reconfiguration of protein conformation in a micro and nano particle (MNP) protein corona due to interaction is an often-overlooked aspect in drug design and nano-medicine. Mostly, MNP-Protein corona studies focus on the toxicity of nano particles (NPs) in a biological environment to analyze biocompatibility. However, preserving functional specificity of proteins in an NP corona becomes critical for effective translation of nano-medicine. This paper investigates the non-classical interaction between insulin and ZnO MNPs using a classical electrical characterization technique at GHz frequency with an objective to understand the effect of the micro particle (MP) and nanoparticle (NP) morphology on the electrical characteristics of the MNP-Protein corona and therefore the conformation and functional specificity of protein. The MNP-Protein corona was subjected to thermal and enzymatic (papain) perturbation to study the denaturation of the protein. Experimental results demonstrate that the morphology of ZnO particles plays an important role in preserving the electrical characteristics of insulin.

Protein-Mimicking Nanoparticles for a Cellular Regulation of Homeostasis

The distinct physical and chemical properties of nanoparticles (NPs) offer great opportunities to develop new strategies for diagnostic and therapeutic purposes. Whereas NPs often serve as inert nanocarriers, their inherent "biological" activities have recently been extensively unveiled and explored. These protein-mimicking NPs (dubbed protmins) have been reported to modulate a cellular homeostasis without displaying a general toxicity, which may act as potential nanomedicines to provide a monotherapy or combination therapy in a disease treatment. In the meanwhile, the unexpected behaviors of protmins in complex biological systems also raise new concerns on the biosafety issue. Herein, we summarize several categories of the protmin-based regulation of cellular homeostasis and discuss their broad effects on cell functions and behaviors.

Structurally Dynamic Hydrogels for Biomedical Applications: Pursuing a Fine Balance between Macroscopic Stability and Microscopic Dynamics

Owing to their unique chemical and physical properties, hydrogels are attracting increasing attention in both basic and translational biomedical studies. Although the classical hydrogels with static networks have been widely reported for decades, a growing number of recent studies have shown that structurally dynamic hydrogels can better mimic the dynamics and functions of natural extracellular matrix (ECM) in soft tissues. These synthetic materials with defined compositions can recapitulate key chemical and biophysical properties of living tissues, providing an important means to understanding the mechanisms by which cells sense and remodel their surrounding microenvironments. This review begins with the overall expectation and design principles of dynamic hydrogels. We then highlight recent progress in the fabrication strategies of dynamic hydrogels including both degradation-dependent and degradation-independent approaches, followed by their unique properties and use in biomedical applications such as regenerative medicine, drug delivery, and 3D culture. Finally, challenges and emerging trends in the development and application of dynamic hydrogels are discussed.

Soft Materials by Design: Unconventional Polymer Networks Give Extreme Properties

Hydrogels are polymer networks infiltrated with water. Many biological hydrogels in animal bodies such as muscles, heart valves, cartilages, and tendons possess extreme mechanical properties including being extremely tough, strong, resilient, adhesive, and fatigue-resistant. These mechanical properties are also critical for hydrogels' diverse applications ranging from drug delivery, tissue engineering, medical implants, wound dressings, and contact lenses to sensors, actuators, electronic devices, optical devices, batteries, water harvesters, and soft robots. Whereas numerous hydrogels have been developed over the last few decades, a set of general principles that can rationally guide the design of hydrogels using different materials and fabrication methods for various applications remain a central need in the field of soft materials. This review is aimed at synergistically reporting: (i) general design principles for hydrogels to achieve extreme mechanical and physical properties, (ii) implementation strategies for the design principles using unconventional polymer networks, and (iii) future directions for the orthogonal design of hydrogels to achieve multiple combined mechanical, physical, chemical, and biological properties. Because these design principles and implementation strategies are based on generic polymer networks, they are also applicable to other soft materials including elastomers and organogels. Overall, the review will not only provide comprehensive and systematic guidelines on the rational design of soft materials, but also provoke interdisciplinary discussions on a fundamental question: why does nature select soft materials with unconventional polymer networks to constitute the major parts of animal bodies?

Intracellular Activation of Anticancer Therapeutics Using Polymeric Bioorthogonal Nanocatalysts

Bioorthogonal catalysis provides a promising strategy for imaging and therapeutic applications, providing controlled in situ activation of pro-dyes and prodrugs. In this work, the use of a polymeric scaffold to encapsulate transition metal catalysts (TMCs), generating bioorthogonal "polyzymes," is presented. These polyzymes enhance the stability of TMCs, protecting the catalytic centers from deactivation in biological media. The therapeutic potential of these polyzymes is demonstrated by the transformation of a nontoxic prodrug to an anticancer drug (mitoxantrone), leading to the cancer cell death in vitro.

pH-Sensitive nanogels for drug delivery in cancer therapy

Compared to normal tissue, solid tumors exhibit a lower pH value. Such pH gradient can be used to design pH-sensitive nanogels for selective drug delivery. The acid-sensitive elements in the nanogel cause it to swell/degrade rapidly, followed by rapid drug release.

Composition and Mechanism of Three-Dimensional Hydrogel System in Regulating Stem Cell Fate

Three-dimensional (3D) hydrogel systems integrating different types of stem cells and scaffolding biomaterials have an important application in tissue engineering. The biomimetic hydrogels that pattern cell suspensions within 3D configurations of biomaterial networks allow for the transport of bioactive factors and mimic the stem cell niche in vivo, thereby supporting the proliferation and differentiation of stem cells. The composition of a 3D hydrogel system determines the physical and chemical characteristics that regulate stem cell function through a biological mechanism. Here, we discuss the natural and synthetic hydrogel compositions that have been employed in 3D scaffolding, focusing on their characteristics, fabrication, biocompatibility, and regulatory effects on stem cell proliferation and differentiation. We also discuss the regulatory mechanisms of cell-matrix interaction and cell-cell interaction in stem cell activities in various types of 3D hydrogel systems. Understanding hydrogel compositions and their cellular mechanisms can yield insights into how scaffolding biomaterials and stem cells interact and can lead to the development of novel hydrogel systems of stem cells in tissue engineering and stem cell-based regenerative medicine. Impact statement Three-dimensional hydrogel system of stem cell mimicking the stemcell niche holds significant promise in tissue engineering and regenerative medicine. Exactly how hydrogel composition regulates stem cell fate is not well understood. This review focuses on the composition of hydrogel, and how the hydrogel composition and its properties regulate the stem cell adhesion, growth, and differentiation. We propose that cell-matrix interaction and cell-cell interaction are important regulatory mechanisms in stem cell activities. Our review provides key insights into how the hydrogel composition regulates the stem cell fate, untangling the engineering of three-dimensional hydrogel systems for stem cells.

High-Strength and High-Toughness Silk Fibroin Hydrogels: A Strategy Using Dynamic Host-Guest Interactions

Natural polymer-based hydrogels attract great attention because of their inherent biocompatibility and controllable biodegradability. However, the broad applications of these hydrogels require a combination of high mechanical strength, high toughness, fatigue resistance, as well as self-healing. The integration of this combination into one natural polymer-based hydrogel remains challenging. Here, a molecular design strategy was proposed to fabricate mechanically robust silk fibroin-based hydrogels using host-guest interactions. Silk fibroin molecules was chemically modified with cholesterol (Chol, guest) or β-cyclodextrin (β-CD, host), and host-guest interaction between Chol and β-CD moieties drove the supramolecular assemblies of hydrogels. The dissociation/reassociation behavior of host-guest complexation, serving as sacrificial bonds, endowed hydrogels with effective energy dissipation and rapid self-healing ability. The prepared silk fibroin-based hydrogels exhibited high mechanical strength, high toughness, and remarkable fatigue resistance, superior to conventional silk fibroin hydrogels. Moreover, due to reversible host-guest interactions, hydrogels achieved facile functional recovery after damage without any external stimuli. This design strategy provides an avenue to develop natural polymer-based materials with robust mechanical properties, thus broadening current hydrogel applications.

Effects of the bonding intensity between hyaluronan and gelatin on chondrogenic phenotypic maintenance

Although there have been many reports on the use of crosslinked hyaluronic acid and gelatin derivatives as injectable hydrogels in cartilage tissue engineering, however, almost no reports have analyzed the kinds of bonding intensity that were most conducive for the maintenance of cartilage phenotypes. Herein, the biomimetic composite hydrogels based on thiolated hyaluronic acid and modified gelatin derivatives with physical mixed, weak, and strong bonding intensity were fabricated, wherein the thiolated hyaluronic acid ensured the basic network structure of composite hydrogels, and gelatin derivatives endowed the bioactivity to hydrogels. These physicochemical properties of composite hydrogels implied that strong bonding intensity (HA-GSH) contributed to the maintenance of a more uniform pore structure, and increased the ability of water retention and resistance to degradation. Further immunohistochemical and RT-PCR analyses demonstrated that the HA-GSH hydrogel greatly improved the expression level of the associated cartilage matrix and the possibility of hyaline cartilage formation in comparison to the physically blended HA-Gel gel and weak bonding crosslinked HA-GMA gel. Overall, all results proved that strong bonding intensity of the disulfide bonds in the HA-GSH hydrogel was more beneficial for the proliferation of chondrocytes and the maintenance of the hyaline cartilage phenotype, which might provide valuable inspiration for designing cartilage repair scaffolds.

Exquisite design of injectable Hydrogels in Cartilage Repair

Cartilage damage is still a threat to human beings, yet there is currently no treatment available to fully restore the function of cartilage. Recently, due to their unique structures and properties, injectable hydrogels have been widely studied and have exhibited high potential for applications in therapeutic areas, especially in cartilage repair. In this review, we briefly introduce the properties of cartilage, some articular cartilage injuries, and now available treatment strategies. Afterwards, we propose the functional and fundamental requirements of injectable hydrogels in cartilage tissue engineering, as well as the main advantages of injectable hydrogels as a therapy for cartilage damage, including strong plasticity and excellent biocompatibility. Moreover, we comprehensively summarize the polymers, cells, and bioactive molecules regularly used in the fabrication of injectable hydrogels, with two kinds of gelation, i.e., physical and chemical crosslinking, which ensure the excellent design of injectable hydrogels for cartilage repair. We also include novel hybrid injectable hydrogels combined with nanoparticles. Finally, we conclude with the advances of this clinical application and the challenges of injectable hydrogels used in cartilage repair.

High-efficient and synergetic antibacterial nanocomposite hydrogel with quaternized chitosan/Ag nanoparticles prepared by one-pot UV photochemical synthesis

Hydrogel dressings have significant advantages such as absorption of tissue exudate, maintenance of proper moist environment, and promotion of cell proliferation. However, facile preparation method and high-efficient antibacterial hydrogel dressings are still a great challenge. In this study, a facile approach to prepare antibacterial nanocomposite hydrogel dressing to accelerate healing was explored. The hydrogels consisted of quaternized chitosan and chemically cross-linked polyacrylamide, as well as silver nanoparticles (AgNPs) stabilized by chitosan. The synthesis of the hydrogels including the formation of AgNPs and polymerization of acrylamide was accomplished simultaneously under UV irradiation in 1 hour without adding initiator. The hydrogels showed favorable tensile strength of ∼100 kPa with elongation at break over 1000% and shear modulus of ∼10⁴ Pa as well as suitable swelling ratio, which were appropriate for wound dressing. The combination of quaternized chitosan and AgNPs exhibited high-efficient and synergetic antibacterial performance with low cytotoxicity. In vivo animal experiments showed that the hydrogel can effectively prevent wound infection and promote wound healing. This study provides a facile method to produce antibacterial hydrogel wound dressing materials.

Biomimetic Presentation of Cryptic Ligands via Single-Chain Nanogels for Synergistic Regulation of Stem Cells

Dynamic controlling the nanoscale presentation of synergistic ligands to stem cells by biomimetic single-chain materials can provide critical insights to understand the molecular crosstalk underlying cells and their extracellular matrix. Here, a stimuli-responsive single-chain macromolecular nanoregulator with conformational dynamics is fabricated based on an advanced scale-up single polymeric chain nanogel (SCNG). Such a carefully designed SCNG is capable of mediating a triggered copresentation of the master and cryptic ligands in a single molecule to elicit the synergistic crosstalk between different intracellular signaling pathways, thereby considerably boosting the bioactivity of the presented ligands. This controllable nanoswitching-on of cell-adhesive ligands' presentation allows the regulation of cell adhesion and fate from molecular scale. The modular nature of this synthetic macromolecular nanoregulator makes it a versatile nanomaterial platform to assist basic and fundamental studies in a wide array of research topics.

All-in-One Hydrogel Realizing Adipose-Derived Stem Cell Spheroid Production and In Vivo Injection via "Gel-Sol" Transition for Angiogenesis in Hind Limb Ischemia

Adipose-derived stem cell (ASC) spheroids exhibit enhanced angiogenic efficacy toward ischemia treatment. Thus, it is necessary to develop an all-in-one platform that enables efficient spheroid production, collection, and injectable implantation in vivo. The present study fabricated a poly(l-glutamic acid) (PLGA)-based porous hydrogel that can not only produce ASC spheroids but also conveniently collect spheroids for in vivo implantation via minimally invasive injection to treat hind limb ischemia. PLGA was cross-linked with cystamine (Cys), which contains disulfide bonds, to form a porous hydrogel that could realize "gel-sol" transition by the reduction effect of glutathione (GSH). For one thing, it was found that the introduction of the disulfide bond in the PLGA hydrogel promoted cellular adhesion via combining fibronectin, preventing the formation of spheroids, while the introduction of polyethylene glycol monomethyl ether (mPEG) could disturb the effect of the disulfide bond on cellular adhesion, supporting spheroid formation inside the porous hydrogel. For another, the porous hydrogel transferred into a syringe could turn into liquid polymer solution within about 40 min for collection of the produced spheroids and in vivo injection. In addition, because of the lubrication of polymer solution, the spheroids were protected during the injection of the spheroids/polymer suspensoid through a 25G syringe needle, avoiding damages from shearing. After the in vivo injection, the enhanced paracrine secretion of ASC spheroids resulted in promoted angiogenesis and muscle regeneration, exhibiting obvious therapeutic effect on limb ischemia in mice after 21 days. At the same time, PLGA-based material exhibited well-performed biocompatibility in vivo.

Preparation and characterization of methacrylated gelatin/bacterial cellulose composite hydrogels for cartilage tissue engineering

Methacrylated gelatin (GelMA)/bacterial cellulose (BC) composite hydrogels have been successfully prepared by immersing BC particles in GelMA solution followed by photo-crosslinking. The morphology of GelMA/BC hydrogel was examined by scanning electron microscopy and compared with pure GelMA. The hydrogels had very well interconnected porous network structure, and the pore size decreased from 200 to 10 µm with the increase of BC content. The composite hydrogels were also characterized by swelling experiment, X-ray diffraction, thermogravimetric analysis, rheology experiment and compressive test. The composite hydrogels showed significantly improved mechanical properties compared with pure GelMA. In addition, the biocompatility of composite hydrogels were preliminarily evaluated using human articular chondrocytes. The cells encapsulated within the composite hydrogels for 7 days proliferated and maintained the chondrocytic phenotype. Thus, the GelMA/BC composite hydrogels might be useful for cartilage tissue engineering.

Functional DNA-based hydrogel intelligent materials for biomedical applications

Multifunctional intelligent DNA hydrogels have been reviewed for many biomedical applications.

Chain conformation transition induced host–guest assembly between triple helical curdlan and β-CD for drug delivery

A novel kind of supramolecular micelle consisting of the triplex curdlan and β-CDs was firstly developed via the conformation transition induced host–guest interaction.

Proanthocyanidin-crosslinked collagen/konjac glucomannan hydrogel with improved mechanical properties and MRI trackable biodegradation for potential tissue engineering scaffolds

Collagen (Col) has been intensively exploited as a biomaterial for its excellent biocompatibility, biodegradation and bioactivity. However, the poor mechanical properties and rapid biodegradation of reconstituted collagen hydrogels have always been the bottlenecks for their further development especially for vascular tissue engineering. Herein, based on the self-assembly characteristics of collagen, a ternary hydrogel scaffold, comprising rigid collagen molecules, flexible konjac glucomannan (KGM) chains and biocompatible crosslinkers of proanthocyanidin (PA), has been designed to achieve a synergistic interaction for essentially optimizing the mechanical properties of the so-obtained Col/KGM/PA hydrogel, which possesses not only substantially improved strength but also good elasticity. PA endows these scaffolds with controllable biodegradation and anti-calcification and antioxidant activities. TEM discovered the co-existence of two types of fibrils with distinctly different arrangement patterns, explaining the contribution of KGM macromolecules to elasticity generation. The in vivo variations of Col/KGM/PA implants are visualized in real-time by magnetic resonance imaging (MRI). Moreover, a quantitative technique of MRI T₂-mapping combined with histology is designed to visualize the in vivo biodegradation mechanism of layer-by-layer erosion for these hydrogels. Simultaneously, three different relationships between the respective processes of in vivo degradation and in vivo dehydration of these controlled hydrogel implants were clearly revealed by this technique. Such a designed Col/KGM/PA composite hydrogel realizes the essential integration of good biocompatibility, controllable biodegradation and improved mechanical properties for developing a desired scaffold material for tissue engineering applications.

Graphene/Si-Promoted Osteogenic Differentiation of BMSCs through Light Illumination

Graphene (Gr) presents promising applications in regulating the osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs). Light illumination is regarded as a spatiotemporally controllable, easily applicable, and noninvasive mean to modulate material responses. Herein, Gr-transferred silicon (Gr/Si) with a Schottky junction is utilized to evaluate the visible-light-promoted osteogenic differentiation of BMSCs. Under light illumination, light-induced charges, owing to the formation of the Schottky junction at the interface of Gr and Si, accumulated on the surface and then changed the surface potential of Gr/Si. The Schottky junction and surface potential at the interface of Gr and Si was measured by photovoltaic test and scanning Kelvin probe microscopy. Alkaline phosphatase (ALP) activity and quantitative real-time polymerase chain reaction (PCR) measurement showed that such variations of surface improved the osteogenic differentiation of BMSCs, and the activation of the voltage-gated calcium channels through surface potential and accumulation of cytosolic Ca²⁺ could be the reason. Moreover, X-ray photoelectron spectroscopy characterization showed that surface charge could also affect BMSCs differentiation through the promotion or inhibition of the adsorption of osteogenic growth factors. Such light-promoted osteogenic differentiation of BMSCs on Gr/Si may have huge potential for biomedical materials or devices for bone regeneration application.