Ultralong UV/mechano-excited room temperature phosphorescence from purely organic cluster excitons

Sergeant-and-Soldier Effect in an Organic Room-Temperature Phosphorescent Host-Guest System

Host-guest systems have emerged as an efficient strategy for promoting organic room temperature phosphorescence (RTP). Despite the advantages of doping guest molecules into a host matrix, the complexity of these systems and the lack of techniques to visualize host-guest interactions at the molecular scale pose significant challenges in understanding the underlying mechanisms. Here, a novel host-guest RTP system is developed by incorporating low concentrations (1-10 mol%) of TPP-4C-BI (guest) into crystalline TPP-4C-Cz (host). Utilizing structural isomerism, the guest molecules are regularly incorporated into the host crystal lattice, resulting in phosphorescence quantum yields almost ten times higher than the pure compounds. The system enabled resolution of the molecular packing of the single crystal through X-ray diffraction, providing unprecedented visualization of host-guest interactions. A "sergeant-and-soldier" effect, where the minority dopant molecules (sergeants) significantly influence the packing arrangement of the host molecules (soldiers), enhances RTP is identified. Further analyses revealed that due to the host molecule's inefficient phosphorescence pathway, its long-lived dark triplets are channeled to the guest via triplet-triplet energy transfer (TTET), allowing the excited energy to radiatively decay more efficiently. These insights advance the understanding of RTP mechanisms and offer practical implications for designing high-efficiency phosphorescent materials.

An Organophosphorescence Probe with Ultralong Lifetime and Intrinsic Tissue Selectivity for Specific Tumor Imaging and Guided Tumor Surgery

Organic phosphorescent materials are excellent candidates for use in tumor imaging. However, a systematic comparison of the effects of the intensity, lifetime, and wavelength of phosphorescent emissions on bioimaging performance has not yet been undertaken. In addition, there have been few reports on organic phosphorescent materials that specifically distinguish tumors from normal tissues. This study addresses these gaps and reveals that longer lifetimes effectively increase the signal intensity, whereas longer wavelengths enhance the penetration depth. Conversely, a strong emission intensity with a short lifetime does not necessarily yield robust imaging signals. Building upon these findings, an organo-phosphorescent material with a lifetime of 0.94 s was designed for tumor imaging. Remarkably, the phosphorescent signals of various organic nanoparticles are nearly extinguished in blood-rich organs because of the quenching effect of iron ions. Moreover, for the first time, we demonstrated that iron ions universally quench the phosphorescence of organic room-temperature phosphorescent materials, which is an inherent property of such substances. Leveraging this property, both the normal liver and hepatitis tissues exhibit negligible phosphorescent signals, whereas liver tumors display intense phosphorescence. Therefore, phosphorescent materials, unlike chemiluminescent or fluorescent materials, can exploit this unique inherent property to selectively distinguish liver tumor tissues from normal tissues without additional modifications or treatments.

Matrix-induced defects and molecular doping in the afterglow of SiO2 microparticles

A deep understanding of how the host matrix influences the afterglow properties of molecule dopants is crucial for designing advanced afterglow materials. Despite its appeal, the impact of defects on the afterglow performance in molecule-doped SiO2 matrices has remained largely unexplored. Herein, we detail the synthesis of monodisperse SiO2 microparticles by hydrothermally doping molecules, such as 4-phenylpyridine, 4,4'-bipyridine, and 1,4-bis(pyrid-4-yl)benzene. Our results demonstrate that hydrothermal reactions induce not only the formation of emissive defects in the SiO2 matrix but also enable molecule doping through SiO2 pseudomorphic transformation. Optical analyses reveal a remarkable afterglow activation of doped molecules, driven by a synergistic interplay of hydrogen bonding and physical fixation. Specifically, 4-phenylpyridine doping leads to an impressive 227- and 271-fold enhancement in fluorescence and afterglow, respectively, and an extraordinary 3711-fold enhancement in the afterglow lifetime of the resulting SiO2 MPs. We also document hybrid states involving molecule dopants and SiO2 defects, explaining energy transfer from molecule dopants to defects in both singlet and triplet states. The robust achievement of molecule doping provides flexibility to tailor excitation-dependent afterglow attributes while preserving angle-dependent structural colors, facilitating the creation of diverse building blocks for multiscale optical platforms for afterglow modulation and information encoding.

Enhancing the Room-Temperature Phosphorescence Performance by Salinization of Guests

Although the host-guest doped strategy effectively improves the phosphorescence performance of materials and greatly enriches the variety of materials, most of the guests are organic molecules with weak luminescence ability, which leads to the need for further improvement in the phosphorescence performance of doped materials. Herein, by salinization of organic molecules, the luminescence performance of the guests was effectively improved, thereby significantly enhancing the phosphorescence performance of the doped system. A compound 4-(naphthalen-2-yl)quinoline (QL) containing nitrogen atom was synthesized as initial guest, then QL was salted to obtain six organic salt guests containing anions BF4-, PF6-, CF3SO3-, N(CF3SO2)2-, ClO4-, and C4F9SO3-, respectively. Two doped systems were constructed using benzophenone and poly(methyl methacrylate) as the hosts. The phosphorescence quantum yield and phosphorescence lifetime of doped materials with QL as guest were only 4.1%/5.2% and 131 ms/141 ms, while those of doped materials with salinized molecules as guests were improved to 32-39% and 534-625 ms, respectively. The single-crystal structures and theoretical calculations indicated that anions can not only enhance the intermolecular interaction of guests but also increase the spin-orbit coupling constant. This work provides an effective strategy for improving the phosphorescence performance of doped materials.

Recent Progress in Solid-State Room Temperature Afterglow Based on Pure Organic Small Molecules

Organic room temperature afterglow (ORTA) can be categorized into two key mechanisms: continuous thermally activated delayed fluorescence (TADF) and room-temperature phosphorescence (RTP), both of which involve a triplet excited state. However, triplet excited states are easily quenched by non-radiative transitions due to oxygen and molecular vibrations. Solid-phase systems provide a conducive environment for triplet excitons due to constrained molecular motion and limited oxygen permeation within closely packed molecules. The stimulated triplet state tends to release energy through radiative transitions. Despite numerous reports on RTP in solid-phase systems in recent years, the complexity of these systems precludes the formulation of a universal theory to elucidate the underlying principles. Several strategies for achieving ORTA luminescence in the solid phase have been developed, encompassing crystallization, polymer host-guest doping, and small molecule host-guest doping. Many of these systems exhibit luminescent responses to various physical stimuli, including light stimulation, mechanical stimuli, and solvent vapor exposure. The appearance of these intriguing luminescent phenomena in solid-phase systems underscores their significant potential applications in areas such as light sensing, biological imaging, and information security.

Host-Guest Metal-Organic Frameworks-Based Long-Afterglow Luminescence Materials

Long-afterglow materials have a broad of applications in optoelectronic devices, sensors, medicine and other fields due to their excellent luminescent properties. The host-guest long-afterglow MOFs material combines the advantages of multi-component characteristics and the stability of MOFs, which improves its luminous performance and expands its other properties. This review introduces the classification, synthesis and application of host-guest MOFs materials with long afterglow. Due to their rigid frames and multi-channel characteristics, MOFs can load common guest materials including rare earth metals, organic dyes, carbon dots, etc. The synthesis methods of loading guest materials into MOFs include solvothermal synthesis, post-encapsulation, post-modification, etc. Those long-afterglow host-guest MOFs have a wide range of applications in the fields of sensors, information security and biological imaging.

Sulphur-atom positional engineering in perylenimide: structure-property relationships and H-aggregation directed type-I photodynamic therapy

An innovative design strategy of placing sulfur (S)-atoms within the pendant functional groups and at carbonyl positions in conventional perylenimide (PNI-O) has been demonstrated to investigate the condensed state structure-property relationship and potential photodynamic therapy (PDT) application. Incorporation of simply S-atoms at the peri-functionalized perylenimide (RPNI-O) leads to an aggregation-induced enhanced emission luminogen (AIEEgen), 2-hexyl-8-(thianthren-1-yl)-1H-benzo[5,10]anthra[2,1,9-def]isoquinoline-1,3(2H)-dione (API), which achieves a remarkable photoluminescence quantum yield (Φ PL) of 0.85 in aqueous environments and established novel AIE mechanisms. Additionally, substitution of the S-atom at the carbonyl position in RPNI-O leads to thioperylenimides (RPNI-S): 2-hexyl-8-phenyl-1H-benzo[5,10]anthra[2,1,9-def]isoquinoline-1,3(2H)-dithione (PPIS), 8-([2,2'-bithiophen]-5-yl)-2-hexyl-1H-benzo[5,10]anthra[2,1,9-def]isoquinoline-1,3(2H)-dithione (THPIS), and 2-hexyl-8-(thianthren-1-yl)-1H-benzo[5,10]anthra[2,1,9-def]isoquinoline-1,3(2H)-dithion (APIS), with distinct photophysical properties (enlarged spin-orbit coupling (SOC) and Φ PL ≈ 0.00), and developed diverse potent photosensitizers (PSs). The present work provides a novel SOC enhancement mechanism via pronounced H-aggregation. Surprisingly, the lowest singlet oxygen quantum yield (Φ Δ) and theoretical calculation suggest the specific type-I PDT for RPNI-S. Interestingly, RPNI-S efficiently produces superoxide (O2˙-) due to its remarkably lower Gibbs free energy (ΔG) values (THPIS: -40.83 kcal mol-1). The non-toxic and heavy-atom free very specific thio-based PPIS and THPIS PSs showed selective and efficient PDT under normoxia, as a rare example.

Water-Ice Microstructures and Hydration States of Acridinium Iodide Studied by Phosphorescence Spectroscopy

Ice has been suggested to have played a significant role in the origin of life partly owing to its ability to concentrate organic molecules and promote reaction efficiency. However, the techniques for studying organic molecules in ice are absorption-based, which limits the sensitivity of measurements. Here we introduce an emission-based method to study organic molecules in water ice: the phosphorescence displays high sensitivity depending on the hydration state of an organic salt probe, acridinium iodide (ADI). The designed ADI aqueous system exhibits phosphorescence that can be severely perturbed when the temperature is higher than 110 K at a concentration of the order of 10-5 M, indicating changes in hydration for ADI. Using the ADI phosphorescent probe, it is found that the microstructures of water ice, i.e., crystalline vs. glassy, can be strongly dictated by a trace amount (as low as 10-5 M) of water-soluble organic molecules. Consistent with cryoSEM images and temperature-dependent Raman spectral data, the ADI is dehydrated in more crystalline ice and hydrated in more glassy ice. The current investigation serves as a starting point for using more sensitive spectroscopic techniques for studying water-organics interactions at a much lower concentration and wider temperature range.

Enhancing Purely Organic Room Temperature Phosphorescence via Supramolecular Self-Assembly

Long-lived and highly efficient room temperature phosphorescence (RTP) materials are in high demand for practical applications in lighting and display, security signboards, and anti-counterfeiting. Achieving RTP in aqueous solutions, near-infrared (NIR) phosphorescence emission, and NIR-excited RTP are crucial for applications in bio-imaging, but these goals pose significant challenges. Supramolecular self-assembly provides an effective strategy to address the above problems. This review focuses on the recent advances in the enhancement of RTP via supramolecular self-assembly, covering four key aspects: small molecular self-assembly, cocrystals, the self-assembly of macrocyclic hosts and guests, and multi-stage supramolecular self-assembly. This review not only highlights progress in these areas but also underscores the prominent challenges associated with developing supramolecular RTP materials. The resulting strategies for the development of high-performance supramolecular RTP materials are discussed, aiming to satisfy the practical applications of RTP materials in biomedical science.

Isostructural doping for organic persistent mechanoluminescence

Mechanoluminescence, featuring light emission triggered by mechanical stimuli, holds immense promise for diverse applications. However, most organic Mechanoluminescence materials suffer from short-lived luminescence, limiting their practical applications. Herein, we report isostructural doping as a valuable strategy to address this challenge. By strategically modifying the host matrices with specific functional groups and simultaneously engineering guest molecules with structurally analogous features for isostructural doping, we have successfully achieved diverse multicolor and high-efficiency persistent mechanoluminescence materials with ultralong lifetimes. The underlying persistent mechanoluminescence mechanism and the universality of the isostructural doping strategy are also clearly elucidated and verified. Moreover, stress sensing devices are fabricated to show their promising prospects in high-resolution optical storage, pressure-sensitive displays, and stress monitoring. This work may facilitate the development of highly efficient organic persistent mechanoluminescence materials, expanding the horizons of next-generation smart luminescent technologies.

3-Ethynyltriimidazo[1,2-a:1',2'-c:1″,2″-e][1,3,5]triazine Dual Short- and Long-Lived Emissions with Crystallization-Enhanced Feature: Role of Hydrogen Bonds and π-π Interactions

Organic room temperature phosphorescent (ORTP) materials with stimuli-responsive, multicomponent emissive behaviour are extremely desirable for various applications. The derivative of cyclic triimidazole (TT) functionalized with an ethynyl group, TT-CCH, is isolated and investigated. The compound possesses crystallization-enhanced emission (CEE) comprising dual fluorescence and dual phosphorescence of both molecular and supramolecular origin with aggregation-induced components highly sensitive to grinding. The mechanisms involved in the emissions have been disclosed thanks to combined structural, spectroscopic and computational investigations. In particular, strong CH⋯N hydrogen bonds are deemed responsible, for the first time in the TT family, together with frequently observed π⋯π stacking interactions, for the aggregated fluorescence and phosphorescence.

Supermolecular Confined Silicon Phosphorescence Nanoprobes for Time-Resolved Hypoxic Imaging Analysis

Room temperature phosphorescence (RTP) nanoprobes play crucial roles in hypoxia imaging due to their high signal-to-background ratio (SBR) in the time domain. However, synthesizing RTP probes in aqueous media with a small size and high quantum yield remains challenging for intracellular hypoxic imaging up to present. Herein, aqueous RTP nanoprobes consisting of naphthalene anhydride derivatives, cucurbit[7]uril (CB[7]), and organosilicon are reported via supermolecular confined methods. Benefiting from the noncovalent confinement of CB[7] and hydrolysis reactions of organosilicon, such small-sized RTP nanoprobes (5-10 nm) exhibit inherent tunable phosphorescence (from 400 to 680 nm) with microsecond second lifetimes (up to ∼158.7 μs) and high quantum yield (up to ∼30%). The as-prepared RTP nanoprobes illustrate excellent intracellular hypoxia responsibility in a broad range from ∼0.1 to 21% oxygen concentrations. Compared to traditional fluorescence mode, the SBR value (∼108.69) of microsecond-range time-resolved in vitro imaging is up to 2.26 times greater in severe hypoxia (<0.1% O2), offering opportunities for precision imaging analysis in a hypoxic environment.

Rapid room-temperature phosphorescence chiral recognition of natural amino acids

Chiral recognition of amino acids is very important in both chemical and life sciences. Although chiral recognition with luminescence has many advantages such as being inexpensive, it is usually slow and lacks generality as the recognition module relies on structural complementarity. Here, we show that one single molecular-solid sensor, L-phenylalanine derived benzamide, can manifest the structural difference between the natural, left-handed amino acid and its right-handed counterpart via the difference of room-temperature phosphorescence (RTP) irrespective of the specific chemical structure. To realize rapid and reliable sensing, the doped samples are obtained as nanocrystals from evaporation of the tetrahydrofuran solutions, which allows for efficient triplet-triplet energy transfer to the chiral analytes generated in situ from chiral amino acids. The results show that L-analytes induce strong RTP, whereas the unnatural D-analytes produce barely any afterglow. The method expands the scope of luminescence chiral sensing by lessening the requirement for specific molecular structures.

Dual-channel mechano-phosphorescence: a combined locking effect with twisted molecular structures and robust interactions

Organic mechanoluminescence materials, featuring dual emission and ultralong phosphorescence characteristics, exhibit significant potential for applications in real-time stress sensing, pressure-sensitive lighting, advanced security marking techniques, and material breakage monitoring. However, due to immature molecular design strategies and unclear luminescence mechanisms, these materials remain rarely reported. In this study, we propose a valuable molecular design strategy to achieve dual-channel mechano-phosphorescence. By introducing the arylphosphine oxide group into a highly twisted molecular framework, enhanced intra- and intermolecular interactions could be achieved within rigid structures, leading to dual-channel mechanoluminescence with greatly promoted ultralong phosphorescence. Further investigations reveal the substantial boosting effect of intra- and intermolecular interactions on mechanoluminescence and ultralong phosphorescence properties by locking the highly twisted molecular skeleton. This work provides a concise and guiding route to develop novel smart responsive luminescence materials for widespread applications in material science.

Recent Advances in Room-Temperature Phosphorescence Metal-Organic Hybrids: Structures, Properties, and Applications

Metal-organic hybrid (MOH) materials with room-temperature phosphorescence (RTP) have drawn attention in recent years due to their superior RTP properties of high phosphorescence efficiency and ultralong emission lifetime. Great achievement has been realized in developing MOH materials with high-performance RTP, but a systematic study on MOH materials with RTP feature is lacking. This review highlights recent advances in metal-organic hybrid RTP materials. The molecular packing, the photophysical properties, and their applications of metal-organic hybrid RTP materials are discussed in detail. Metal-organic hybrid RTP materials can be divided into six parts: coordination polymers, metal-organic frameworks (MOFs), metal-halide hybrids, organic ionic crystals, organic ionic polymers, and organic-inorganic hybrid perovskites. These RTP materials have been successfully applied in time-resolved data encryption, fingerprint recognition, information logic gates, X-ray imaging, and photomemory. This review not only provides the basic principles of designing RTP metal-organic hybrids, but also propounds the future research prospects of RTP metal-organic hybrids. This review offers many effective strategies for developing metal-organic hybrids with excellent RTP properties, thus satisfying practical applications.

Dopants Induce Persistent Room Temperature Phosphorescence in Triarylamine Boronate Esters

Purely organic materials exhibiting room temperature phosphorescence (RTP) are promising candidates for oxygen sensors and information encryption owing to their cost-effective and environmentally friendly nature. Herein, we report a bimolecular RTP system where DTBU acts as the guest and TBBU serves as the host. In contrast to previously reported results, we find that both pure DTBU and TBBU do not exhibit RTP in the solid state even under N2 atmosphere. A DTBU/TBBU system with a low doping ratio (0.1 mol %) exhibits persistent yellowish-green afterglow with a lifetime of 340 ms and is highly sensitive to oxygen. A DTBU/TBBU system with a higher doping ratio (10 mol %) maintains a phosphorescence lifetime of 179 ms under air. Applications of DTBU/TBBU at varied doping ratios in both oxygen sensing and information encryption are demonstrated. We propose that the T1 state of TBBU acts as an energy transfer intermediate between Tn and T1 of DTBU, ultimately leading to the generation of persistent RTP. Overall, this work demonstrates the critical importance of material purity in the design of RTP systems, and how an understanding of host-guest doping enables their photophysical properties to be precisely tuned.

Abnormal thermally-stimulated dynamic organic phosphorescence

Dynamic luminescence behavior by external stimuli, such as light, thermal field, electricity, mechanical force, etc., endows the materials with great promise in optoelectronic applications. Upon thermal stimulus, the emission is inevitably quenched due to intensive non-radiative transition, especially for phosphorescence at high temperature. Herein, we report an abnormal thermally-stimulated phosphorescence behavior in a series of organic phosphors. As temperature changes from 198 to 343 K, the phosphorescence at around 479 nm gradually enhances for the model phosphor, of which the phosphorescent colors are tuned from yellow to cyan-blue. Furthermore, we demonstrate the potential applications of such dynamic emission for smart dyes and colorful afterglow displays. Our results would initiate the exploration of dynamic high-temperature phosphorescence for applications in smart optoelectronics. This finding not only contributes to an in-depth understanding of the thermally-stimulated phosphorescence, but also paves the way toward the development of smart materials for applications in optoelectronics.

Contact-separation-induced self-recoverable mechanoluminescence of CaF2:Tb3+/PDMS elastomer

Centrosymmetric-oxide/polydimethylsiloxane elastomers emit ultra-strong non-pre-irradiation mechanoluminescence under stress and are considered one of the most ideal mechanoluminescence materials. However, previous centrosymmetric-oxide/polydimethylsiloxane elastomers show severe mechanoluminescence degradation under stretching, which limits their use in applications. Here we show an elastomer based on centrosymmetric fluoride CaF2:Tb3+ and polydimethylsiloxane, with mechanoluminescence that can self-recover after each stretching. Experimentation indicates that the self-recoverable mechanoluminescence of the CaF2:Tb3+/polydimethylsiloxane elastomer occurs essentially due to contact electrification arising from contact-separation interactions between the centrosymmetric phosphors and the polydimethylsiloxane. Accordingly, a contact-separation cycle model of the phosphor-polydimethylsiloxane couple is established, and first-principles calculations are performed to model state energies in the contact-separation cycle. The results reveal that the fluoride-polydimethylsiloxane couple helps to induce contact electrification and maintain the contact-separation cycle at the interface, resulting in the self-recoverable mechanoluminescence of the CaF2:Tb3+/polydimethylsiloxane elastomer. Therefore, it would be a good strategy to develop self-recoverable mechanoluminescence elastomers based on centrosymmetric fluoride phosphors and polydimethylsiloxane.

Enabling Highly Robust Full-Color Ultralong Room-Temperature Phosphorescence and Stable White Organic Afterglow from Polycyclic Aromatic Hydrocarbons

In this work, full-color and stable white organic afterglow materials with outstanding water, organic solvents, and temperature resistances have been developed for the first time by embedding the selected polycyclic aromatic hydrocarbons into melamine-formaldehyde polymer via solution polymerization. The afterglow quantum yields and lifetimes of the resulting polymer films were up to 22.7 % and 4.83 s, respectively, under ambient conditions. For the coronene-doped sample, its afterglow color could be linearly tuned between yellow and blue by adjusting the temperature, and it could still emit an intense blue afterglow with a lifetime of 0.68 s at 440 K. Moreover, the films showed a bright and stable white afterglow at 370 K with a lifetime of 2.80 s and maintained an excellent afterglow performance after soaking in water and organic solvents for more than 150 days. In addition, the application potential of the polymer films in information encryption and anti-counterfeiting was also demonstrated.

Stimuli-fluorochromic smart organic materials

Smart materials based on stimuli-fluorochromic π-conjugated solids (SFCSs) have aroused significant interest due to their versatile and exciting properties, leading to advanced applications. In this review, we highlight the recent developments in SFCS-based smart materials, expanding beyond organometallic compounds and light-responsive organic luminescent materials, with a discussion on the design strategies, exciting properties and stimuli-fluorochromic mechanisms along with their potential applications in the exciting fields of encryption, sensors, data storage, display, green printing, etc. The review comprehensively covers single-component and multi-component SFCSs as well as their stimuli-fluorochromic behaviors under external stimuli. We also provide insights into current achievements, limitations, and major challenges as well as future opportunities, aiming to inspire further investigation in this field in the near future. We expect this review to inspire more innovative research on SFCSs and their advanced applications so as to promote further development of smart materials and devices.

Circularly Polarized Organic Ultralong Room-Temperature Phosphorescence with A High Dissymmetry Factor in Chiral Helical Superstructures

Long-lived room-temperature phosphorescence (RTP) of organic materials holds a significant potential for optical information. Circularly polarized organic ultralong room-temperature phosphorescence (CP-OURTP) with extremely high dissymmetry factor (glum ) values is even highly demanded and considerably challenging. Here, an effective strategy is introduced to realize CP-OURTP with an emission decay time of 735 ms and a glum value up to 1.49, which exceeds two orders of magnitude larger than previous records, through a system composed of RTP polymers and chiral helical superstructures. The system exhibits excellent stability under multiple cycles of photoirradiation and thermal treatment, and is further employed for information encryption based on optical multiplexing. The results are anticipated to lay the foundation for the development of CP-OURTP materials in advanced photonic applications.

Modulation of Deep-Red to Near-Infrared Room-Temperature Charge-Transfer Phosphorescence of Crystalline "Pyrene Box" Cages by Coupled Ion/Guest Structural Self-Assembly

Organic cocrystals obtained from multicomponent self-assembly have garnered considerable attention due to their distinct phosphorescence properties and broad applications. Yet, there have been limited reports on cocrystal systems that showcase efficient deep-red to near-infrared (NIR) charge-transfer (CT) phosphorescence. Furthermore, effective strategies to modulate the emission pathways of both fluorescence and phosphorescence remain underexplored. In this work, we dedicated our work to four distinct self-assembled cocrystals called "pyrene box" cages using 1,3,6,8-pyrenetetrasulfonate anions (PTS4-), 4-iodoaniline (1), guanidinium (G+), diaminoguanidinium (A2G+), and hydrated K+ countercations. The binding of such cations to PTS4- platforms adaptively modulates their supramolecular stacking self-assembly with guest molecules 1, allowing to steer the fluorescence and phosphorescence pathways. Notably, the confinement of guest molecule 1 within "pyrene box" PTSK{1} and PTSG{1} cages leads to an efficient deep-red to NIR CT phosphorescence emission. The addition of fuming gases like triethylamine and HCl allows reversible pH modulations of guest binding, which in turn induce a reversible transition of the "pyrene box" cage between fluorescence and phosphorescence states. This capability was further illustrated through a proof-of-concept demonstration in shrimp freshness detection. Our findings not only lay a foundation for future supramolecular designs leveraging weak intermolecular host-guest interactions to engineer excited states in interacting chromophores but also broaden the prospective applications of room-temperature phosphorescence materials in food safety detection.

Molecularly Engineered Room-Temperature Phosphorescence for Biomedical Application: From the Visible toward Second Near-Infrared Window

Phosphorescence, characterized by luminescent lifetimes significantly longer than that of biological autofluorescence under ambient environment, is of great value for biomedical applications. Academic evidence of fluorescence imaging indicates that virtually all imaging metrics (sensitivity, resolution, and penetration depths) are improved when progressing into longer wavelength regions, especially the recently reported second near-infrared (NIR-II, 1000-1700 nm) window. Although the emission wavelength of probes does matter, it is not clear whether the guideline of "the longer the wavelength, the better the imaging effect" is still suitable for developing phosphorescent probes. For tissue-specific bioimaging, long-lived probes, even if they emit visible phosphorescence, enable accurate visualization of large deep tissues. For studies dealing with bioimaging of tiny biological architectures or dynamic physiopathological activities, the prerequisite is rigorous planning of long-wavelength phosphorescence, being aware of the cooperative contribution of long wavelengths and long lifetimes for improving the spatiotemporal resolution, penetration depth, and sensitivity of bioimaging. In this Review, emerging molecular engineering methods of room-temperature phosphorescence are discussed through the lens of photophysical mechanisms. We highlight the roles of phosphorescence with emission from visible to NIR-II windows toward bioapplications. To appreciate such advances, challenges and prospects in rapidly growing studies of room-temperature phosphorescence are described.

Polymerization Based on Modified β-Cyclodextrin Achieves Efficient Phosphorescence Energy Transfer for Anti-Counterfeiting

Supramolecular polymerization can not only activate guest phosphorescence, but also promote phosphorescence Förster resonance energy transfer and induce effective delayed fluorescence. Herein, the solid supramolecular assemblies of ternary copolymers based on acrylamide, modified β-cyclodextrin (CD), and carbazole (CZ) are reported. After doping with polyvinyl alcohol (PVA) and dyes, a NIR luminescence supramolecular composite with a lifetime of 1.07 s, an energy transfer efficiency of up to 97.4% is achieved through tandem phosphorescence energy transfer. The ternary copolymers can realize macrocyclic enrichment of dyes in comparison to CZ and acrylamide copolymers without CD, which can facilitate energy transfer between triplet and singlet with a high donor-acceptor ratio. Additionally, the flexible polymeric films exhibit regulable lifetime, tunable luminescence color, and repeatable switchable afterglow by adjusting the excitation wavelength, donor-acceptor ratio, and wet/dry stimuli. The luminescence materials are successfully applied to information encryption and anti-counterfeiting.

Phosphorescence resonance energy transfer from purely organic supramolecular assembly

Phosphorescence energy transfer systems have been applied in encryption, biomedical imaging and chemical sensing. These systems exhibit ultra-large Stokes shifts, high quantum yields and are colour-tuneable with long-wavelength afterglow fluorescence (particularly in the near-infrared) under ambient conditions. This review discusses triplet-to-singlet PRET or triplet-to-singlet-to-singlet cascaded PRET systems based on macrocyclic or assembly-confined purely organic phosphorescence introducing the critical toles of supramolecular noncovalent interactions in the process. These interactions promote intersystem crossing, restricting the motion of phosphors, minimizing non-radiative decay and organizing donor-acceptor pairs in close proximity. We discuss the applications of these systems and focus on the challenges ahead in facilitating their further development.

Evolution of organic phosphor through precision regulation of nonradiative decay

Development of single-component organic phosphor attracts increasing interest due to its wide applications in optoelectronic technologies. Theoretically, activating efficient intersystem crossing (ISC) via 1(π, π*) to 3(π, π*) transitions, rather than 1(n, π*) → 3(π, π*) transitions, is an alternative access to purely organic phosphors but remains challenging. Herein, we designed and successfully synthesized the sila-8-membered ring fused biaryl benzoskeleton by transition metal catalysis, which served as a new organic phosphor with efficient 1(π, π*) to 3(π, π*) ISC. We first found that such a compound exhibits a record-long phosphorescence lifetime of 6.5 s at low temperature for single-component organic systems. Then, we developed two strategies to tune their decay channels to evolve such nonemissive molecules into bright phosphors with elongated lifetimes at room temperature: 1) Physic-based design, where quantitative analyses of electron-phonon coupling led us to reveal and hinder the major nonradiative channels, thus lighted up room temperature phosphorescence (RTP) with a lifetime of 480 ms at 298 K; 2) chemical geometry-driven molecular engineering, where a geometry-based descriptor ΔΘT1-S0/ΘS0 was developed for rational screening RTP candidates and further improved the RTP lifetime to 794 ms. This study clearly shows the power of interdiscipline among synthetic methodology, physics-based rational design, and computational modeling, which represents a paradigm for the development of an organic emitter.

Recent advances in the design of afterglow materials: mechanisms, structural regulation strategies and applications

Afterglow materials are attracting widespread attention owing to their distinctive and long-lived optical emission properties which create exciting opportunities in various fields. Recent research has led to the discovery of many new afterglow materials featuring high photoluminescence quantum yields (PLQY) and lifetimes of up to several hours under ambient conditions. Afterglow materials are typically categorized according to their luminescence mechanism, such as long-persistent luminescence (LPL), room temperature phosphorescence (RTP), or thermally activated delayed fluorescence (TADF). Through rational design and novel synthetic strategies to modulate spin-orbit coupling (SOC) and populate triplet exciton states (T1), luminophores with long lifetimes and bright afterglow characteristics can be realized. Initial research towards afterglow materials focused mainly on pure inorganic materials, many of which possessed inherent disadvantages such as metal toxicity or low energy emissions. In recent years, organic-inorganic hybrid afterglow materials (OIHAMs) have been developed with high PLQY and long lifetimes. These hybrid materials exploit the tunable structure and easy processing of organic molecules, as well as enhanced SOC and intersystem crossing (ISC) processes involving heavy atom dopants, to achieve excellent afterglow performance. In this review, we begin by briefly discussing the structure and composition of inorganic and organic-inorganic hybrid afterglow materials, including strategies for regulating their lifetime, PLQY and luminescence wavelength. The specific advantages of organic-inorganic hybrid afterglow materials, including low manufacturing costs, diverse molecular/electronic structures, tunable structures and optical properties, and compatibility with a variety of substrates, are emphasized. Subsequently, we discuss in detail the fundamental mechanisms used by afterglow materials, their classification, design principles, and end applications (including sensing, anticounterfeiting, and photoelectric devices, among others). Finally, existing challenges and promising future directions are discussed, laying a platform for the design of afterglow materials for specific applications.

Disorder-Enhanced Charge-Transfer-Mediated Room-Temperature Phosphorescence in Polymer Media

Room-temperature phosphorescence (RTP) polymers have important applications for biological imaging, oxygen sensing, data encryption, and photodynamic therapy. Despite the many advantages polymeric materials offer such as great control over gas permeability and processing flexibility, disorder is traditionally considered as an intrinsic negative impact on the efficiency for embedded RTP luminophores, as various allowed thermal motions could quench the emitting states. However, we propose that such disorder-enabled freedoms of microscopic motions can be beneficial for charge-transfer-mediated RTP, which is facilitated by molecular conformational changes among different electronic transition states. Using the "classic" pyrene-aniline exciplex as an example, we demonstrate the mutual enhancement of red/near-infrared and green RTP emissions from the pyrene and aniline moieties, respectively, upon doping the aniline polymer with trace pyrene derivatives. In comparison, a pyrene-doped crystal formed with the same aniline structure exhibits only charge-transfer fluorescence with no red or green RTP observed, suggesting that order suppresses the RTP channels. The proposed polymerization strategy may be used as a unified method to generate multi-emissive polymeric RTP materials from a vast pool of known and unknown exciplexes and charge-transfer complexes.

Highly efficient color-tunable organic co-crystals unveiling polymorphism, isomerism, delayed fluorescence for optical waveguides and cell-imaging

Photofunctional co-crystal engineering strategies based on donor-acceptor π-conjugated system facilitates expedient molecular packing, consistent morphology, and switchable optical properties, conferring synergic 'structure-property relationship' for optoelectronic and biological functions. In this work, a series of organic co-crystals were formulated using a twisted aromatic hydrocarbon (TAH) donor and three diverse planar acceptors, resulting in color-tunable solid and aggregated state emission via variable packing and through-space charge-transfer interactions. While, adjusting the strength of acceptors, a structural transformation into hybrid stacking modes ultimately results in color-specific polymorphs, a configurational cis-isomer with very high photoluminescence quantum yield. The cis-isomeric co-crystal exhibits triplet-harvesting thermally activated delayed fluorescence (TADF) characteristics, presenting a key discovery in hydrocarbon-based multicomponent systems. Further, 1D-microrod-shaped co-crystal acts as an efficient photon-transducing optical waveguides, and their excellent dispersibility in water endows efficient cellular internalization with bright cell imaging performances. These salient approaches may open more avenues for the design and applications of TAH based co-crystals.

Controlled mechano-luminescence properties of SrGa2O4:Tb3+ co-doping with Dy3+ and Eu3+ ions

Trap-controlled mechano-luminescence (ML) featuring photon emission under mechanical stimuli provides promising applications such as dynamic imaging of force, integrated optical sensing, information storage, and anti-counterfeiting encryption. However, the corresponding emission with a single color still limits the application of ML materials. Here, a trap-controlled ML phosphor of SrGa₂O₄:Tb³⁺ (SGO:Tb³⁺) with a green-emission is investigated with an adjustable ML color. The relationship between ML and thermoluminescence (TL) is verified by co-doping with Dy³⁺ and Eu³⁺ ions for the manipulation of the constructed traps. Accordingly, the as-explored ML phosphor with multicolor output is employed to create encrypted anticounterfeiting patterns, which produces bright and spatially resolvable optical codes under the single-point dynamic pressure of a ballpoint pen. Hence, it provides a new approach to achieve ML with multicolor and gives us an insight into understanding the mechanism of the ML procedure.

Restriction of molecular motion to a higher level: Towards bright AIE dots for biomedical applications

In the late 19th century, scientists began to study the photophysical differences between chromophores in the solution and aggregate states, which breed the recognition of the prototypical processes of aggregation-caused quenching and aggregation-induced emission (AIE). In particular, the conceptual discovery of the AIE phenomenon has spawned the innovation of luminogenic materials with high emission in the aggregate state based on their unique working principle termed the restriction of intramolecular motion. As AIE luminogens have been practically fabricated into AIE dots for bioimaging, further improvement of their brightness is needed although this is technically challenging. In this review, we surveyed the recent advances in strategic molecular engineering of highly emissive AIE dots, including nanoscale crystallization and matrix-assisted rigidification. We hope that this timely summary can deepen the understanding about the root cause of the high emission of AIE dots and provide inspiration to the rational design of functional aggregates.

Realizing Photoswitchable Mechanoluminescence in Organic Crystals Based on Photochromism

Organic mechanoluminescent (ML) materials possessing photophysical properties that are sensitive to multiple external stimuli have shown great potential in many fields, including optic and sensing. Particularly, the photoswitchable ML property for these materials is fundamental to their applications but remains a formidable challenge. Herein, photoswitchable ML is successfully realized by endowing reversible photochromic properties to an ML molecule, namely 2-(1,2,2-triphenylvinyl) fluoropyridine (o-TPF). o-TPF shows both high-contrast photochromism with a distinct color change from white to purplish red, as well as bright blue ML (λ_ML  = 453 nm). The ML property can be repeatedly switched between ON and OFF states under alternate UV and visible light irradiation. Impressively, the photoswitchable ML is of high stability and repeatability. The ML can be reversibly switched on and off by conducting alternate UV and visible light irradiation in cycles under ambient conditions. Experimental results and theoretical calculations reveal that the change of dipole moment of o-TPF during the photochromic process is responsible for the photoswitchable ML. These results outline a fundamental strategy to achieve for the control of organic ML and pave the way to the development of expanded smart luminescent materials and their applications.

Observation of Chiral-selective room-temperature phosphorescence enhancement via chirality-dependent energy transfer

Pure organic room-temperature phosphorescence (RTP), particularly from guest-host doped systems, has seen exponential growth in the last several years due to their high modulation flexibility, and yet challenges remain with respect to mechanistic elucidations and advantageous applications. Here we show that by constructing guest-host doped RTP systems from chiral components, namely, chiral amino compound-modified phthalimide hosts and naphthalimide guests, a chiral-selective RTP enhancement phenomenon can be observed. For example, R-enantiomeric guests in R-enantiomeric hosts produce strong red RTP afterglow while no appreciable RTP could be observed in the S-R guest-host counterpart. An unprecedented RTP intensity difference > 10² folds with the ability to distinguish an enantiomeric excess of 98% could be achieved. Temperature-dependent measurements suggest that a chirality-dependent energy transfer process may be involved in the observed phenomenon, which can be harnessed to extend the RTP application to the chiral recognition of amino compounds, such as amino alcohols.

Boosting the Phosphorescence Efficiency in Doped Organic Crystals: Critical Role of Hydrogen Bonding

Host-guest doping systems with phthalimides (BI) and N-methylphthalimide (NMeBI) as the host and 1,8-naphthalimide (NI) and 4-bromo-1,8-naphthalimide (4BrNI) as the guest have been developed. The 0.2% NI/BI (molar ratio) with a strong C=O···H-N hydrogen bond exhibited a phosphorescence quantum efficiency (29.2%) higher than that of NI/NMeBI with a weak C=O···H-C hydrogen bond (10.1%). A similar trend was observed in the 4BrNI guest system. A remarkable phosphorescent efficiency of 42.1% was achieved in a 0.5% 4BrNI/BI composite, which represents the highest value in NI-based phosphors. This research indicates stronger hydrogen bonding may have a greater contribution in boosting the phosphorescence efficiency.

Stimulus-Responsive Organic Phosphorescence Materials Based on Small Molecular Host-Guest Doped Systems

Small molecular host-guest doped materials exhibit superiority toward high-efficiency room-temperature phosphorescence (RTP) materials due to their structural design diversity and ease of preparation. Dynamic RTP materials display excellent characteristics, such as good reversibility, quick response, and tunable luminescence ability, making them applicable to various cutting-edge technologies. Herein, we summarize the advances in host-guest doped dynamic RTP materials that respond to external and internal stimuli and present some insights into the molecular design strategies and underlying mechanisms. Subsequently, specific viewpoints are described regarding this promising field for the development of dynamic RTP materials. This Perspective is highly beneficial for future intelligent applications of dynamic RTP systems.

Room-Temperature Phosphorescence and Cellular Phototoxicity Activated by Triplet Dynamics in Aggregates of Push-Pull Phenothiazine-Based Isomers

In this study, we report a comprehensive time-resolved spectroscopic investigation of the excited-state deactivation mechanism in three push-pull isomers characterized by a phenothiazine electron donor, a benzothiazole electron acceptor, and a phenyl π-bridge where the connection is realized at the relative ortho, meta, and para positions. Spin-orbit charge-transfer-induced intersystem crossing takes place with high yield in these all-organic donor-acceptor compounds, leading also to efficient production of singlet oxygen. Our spectroscopic results give clear evidence of room-temperature phosphorescence not only in solid-state host-guest matrices but also in highly biocompatible aggregates of these isomers produced in water dispersions, as rarely reported in the literature. Moreover, aggregates of the isomers could be internalized by lung cancer and melanoma cells and display bright luminescence without any dark cytotoxic effect. On the other hand, the isomers showed significant cellular phototoxicity against the tumor cells due to light-induced reactive oxygen species generation. Our findings strongly suggest that nanoaggregates of the investigated isomers are promising candidates for imaging-guided photodynamic therapy.

Treat the "Untreatable" by a Photothermal Agent: Triggering Heat and Immunological Responses for Rabies Virus Inactivation

Rabies is a fatal neurological zoonotic disease caused by the rabies virus (RABV), and the approved post-exposure prophylaxis (PEP) procedure remains unavailable in areas with inadequate medical systems. Although strategies have been proposed for PEP and postinfection treatment (PIT), because of the complexity of the treatment procedures and the limited curative outcome, developing an effective treatment strategy remains a holy grail in rabies research. Herein, a facile approach is proposed involving photothermal therapy (PTT) and photothermally triggered immunological effects to realize effective PEP and PIT simultaneously. The designed photothermal agent (N+ TT-mCB nanoparticles) featured positively charged functional groups and high photo-to-heat efficiency, which are favorable for virus targeting and inactivation. The level of the virus at the site of infection in mice is significantly decreased upon treatment with orthotopic PTT, and the transfer of the virus to the brain is significantly inhibited. Furthermore, the survival ratio of the mice three days postinfection is increased by intracranial injection of N+ TT-mCB and laser irradiation. Overall, this work provides a platform for the effective treatment of RABV and opens a new avenue for future antiviral studies.

Dynamic B/N Lewis Pairs: Insights into the Structural Variations and Photochromism via Light-Induced Fluorescence to Phosphorescence Switching

Ultralong afterglow emissions due to room-temperature phosphorescence (RTP) are of paramount importance in the advancement of smart sensors, bioimaging and light-emitting devices. We herein present an efficient approach to achieve rarely accessible phosphorescence of heavy atom-free organoboranes via photochemical switching of sterically tunable fluorescent Lewis pairs (LPs). LPs are widely applied in and well-known for their outstanding performance in catalysis and supramolecular soft materials but have not thus far been exploited to develop photo-responsive RTP materials. The intramolecular LP M1BNM not only shows a dynamic response to thermal treatment due to reversible N→B coordination but crystals of M1BNM also undergo rapid photochromic switching. As a result, unusual emission switching from short-lived fluorescence to long-lived phosphorescence (rad-M1BNM, τ_RTP =232 ms) is observed. The reported discoveries in the field of Lewis pairs chemistry offer important insights into their structural dynamics, while also pointing to new opportunities for photoactive materials with implications for fast responsive detectors.

A dish-like molecular architecture for dynamic ultralong room-temperature phosphorescence through reversible guest accommodation

Developing dynamic organic ultralong room-temperature phosphorescent (URTP) materials is of practical importance in various applications but remains a challenge due to the difficulty in manipulating aggregate structures. Herein, we report a dish-like molecular architecture via a bottom-up way, featuring guest-responsive dynamic URTP. Through controlling local fragment motions in the molecular architecture, fascinating dynamic URTP performances can be achieved in response to reversible accommodation of various guests, including solvents, alkyl bromides and even carbon dioxide. Large-scale regulations of phosphorescence lifetime (100-fold) and intensity (10-fold) can be realized, presenting a maximum phosphorescence efficiency and lifetime of 78.8% and 483.1 ms, respectively. Moreover, such a dish-like molecular architecture is employed for temperature-dependent multiple information encryption and visual identification of linear alkyl bromides. This work can not only deepen our understanding to construct multifunctional organic aggregates, but also facilitate the design of high-performance dynamic URTP materials and enrich their practical applications.

Two Cholesterol-Containing Pyrene Derivatives: Subtle Spacer Difference, Diverse Stimuli-Responsive Luminescence, Chirality, and Self-Assembly Behaviors

Two chiral molecules 1 and 2 were designed and synthesized with a pyrene moiety directly linked to a chiral cholesterol moiety and connected through a methylene spacer, respectively. Influence of the spacer on their stimuli-responsive luminescence, chirality, and self-assembly behaviors was systematically investigated. Molecules 1 and 2 had similar aggregation-induced emission enhancement (AIEE) in solution, because of carrying the same fluorescence moiety. Both molecules displayed mechanochromism (MC) property but with different color contrast, whereas only 2 showed mechanoluminescence (ML) activity. When doping in liquid crystal molecule 5CB, both molecules induced the formation of chiral nematic liquid crystals (N*-LCs) with strong circularly polarized luminescence (CPL). Molecule 2 induced single handedness signal, irrespective of doping ratios, while 1-doped N*-LCs showed an inversion of CPL signal from negative to positive upon the increase of doping ratios. Molecules 1 and 2 also self-assembled into different coassemblies with 5CB. Their distinct behaviors were attributed to the influence of the methylene spacer, which caused different molecular conformation and steric bulkiness; accordingly, it changed intermolecular interactions and molecular packing of the two molecules and led to diverse chirality and luminescence. This work provided important model molecules to better understand the molecular structure-property relationship and guide the design of novel functional molecules.

Guest-activated quaternary ammonium salt hosts emit room temperature phosphorescence

A novel doped system based on quaternary ammonium salts as hosts was established. Interestingly, it is the guest-activated hosts that emit room temperature phosphorescence, rather than the host-assisted guests in traditional doped systems.

Organic phosphorescent nanoscintillator for low-dose X-ray-induced photodynamic therapy

X-ray-induced photodynamic therapy utilizes penetrating X-rays to activate reactive oxygen species in deep tissues for cancer treatment, which combines the advantages of photodynamic therapy and radiotherapy. Conventional therapy usually requires heavy-metal-containing inorganic scintillators and organic photosensitizers to generate singlet oxygen. Here, we report a more convenient strategy for X-ray-induced photodynamic therapy based on a class of organic phosphorescence nanoscintillators, that act in a dual capacity as scintillators and photosensitizers. The resulting low dose of 0.4 Gy and negligible adverse effects demonstrate the great potential for the treatment of deep tumours. These findings provide an optional route that leverages the optical properties of purely organic scintillators for deep-tissue photodynamic therapy. Furthermore, these organic nanoscintillators offer an opportunity to expand applications in the fields of biomaterials and nanobiotechnology.

Insight into Isomeric Effect on the Photoluminescence and Mechanoluminescence of Cyanostilbene Derivatives

Molecular structures, packings, and intermolecular interactions significantly affect the photophysical properties of organic luminogens. In this work, the photoluminescence (PL) and mechanoluminescence (ML) of two pairs of isomers, 1/2 and 3/4, were systematically explored. The fluorescence of crystals 1c and 4c is much brighter than that of their isomers 2c and 3c, respectively. Only 1c is ML-active among all four molecules. Single-crystal structural analysis revealed that isomerization of a substituent group affected their molecular packing and intermolecular interactions. Stronger intermolecular interaction and intact three-dimensional hydrogen-bonded networks were formed only in crystal 1c, which were essential for preventing slippage of molecular layers and generating ML; the other molecules were either lacking π-π interactions or C-H···π interactions. Theoretical calculation suggested that the energy barrier between the Franck-Condon (FC) structure and minimum energy crossing point (MECP) structure of 2/3 was much lower than that of 1/4. Nonradiative decay channels of molecules 2 and 3 were thus more easily activated, which led to their lower quantum yield.

Metal Ions as the Third Component Coordinate with the Guest to Stereoscopically Enhance the Phosphorescence Properties of Doped Materials

The construction of multicomponent doped systems is an important direction for the development of phosphorescence materials. Herein, benzophenone is selected as the host, phenylquinoline isomers are designed as guests, and seven metal ions are selected as the third component (Al³⁺, Cu^+/2+, Zn²⁺, Ga³⁺, Ag⁺, Cd²⁺, and In³⁺) to construct the three-component doped system. Ag⁺ and Cd²⁺ can considerably increase the emission intensity up to 38 times, and the highest phosphorescence quantum efficiency reaches 70%. Al³⁺, Ga³⁺, and In³⁺ can prolong the emission wavelength, and the phosphorescence wavelength can be red-shifted up to 60 nm. Cu²⁺, Ga³⁺, and In³⁺ can extend the phosphorescence lifetime by a maximum of 3.6 times. A series of experiments demonstrated that the coordination of metals and guests is the key to improve the phosphorescence properties. This work presents a simple and effective strategy to enhance the phosphorescence properties of doped materials.

Molecular Thermal Motion Modulated Room-Temperature Phosphorescence for Multilevel Encryption

The stimulus-responsive room-temperature phosphorescence (RTP) materials have become an increasingly significant topic in the fields of bioimaging, sensing, and anticounterfeiting. However, this kind of materials is scarce to date, especially for the ones with delicate stimulus-responsive behavior. Herein, a universal strategy for multilevel thermal erasure of RTP via chromatographic separation of host-guest doping RTP systems is proposed. The tunable host-guest systems, matrix materials, heating temperature, and time are demonstrated to allow precise six-level data encryption, QR code encryption, and thermochromic phosphorescence encryption. Mechanistic study reveals that the thermal-responsive property might be attributed to molecular thermal motion and the separation effect of the silica gel, which provides expanded applications of host-guest RTP materials such as cold chain break detection. This work offers a simple yet universal way to construct advanced responsive RTP materials.