Promoting H2O2 production via 2-electron oxygen reduction by coordinating partially oxidized Pd with defect carbon

Highly efficient metal-free electrochemical membrane enables zero-valent sulfur recovery from thiourea wastewater

Electrochemical recovery of zero-valent sulfur (S0) from thiourea (TU) wastewater offers a promising waste-to-value strategy that expects to promote the sulfur resource cycle in water treatment but still suffer from electrode poisoning and sulfur over-oxidation. Herein, we designed a metal-free CNT electrochemical membrane for selective oxidation of thiourea and recovery of S0. We found that defect sites on the carbon nanotube surface enable direct electron transfer for thiourea oxidation and may form carbon-sulfur bridge bonds, thereby facilitating the generation of S0 and urea. When treating real industrial wastewater with a concentration of 83.1 mg L-1 thiourea, the CNT membrane system could achieve a thiourea removal efficiency of 95.4% and a S0 recovery rate of 83.8% at 150 L m-2 h-1. The corresponding treatment energy consumption and S0 recovery energy consumption are 3.3 ± 0.2 kWh kg-TU-1 and 9.9 ± 1.0 kWh kg-S-1, respectively, lower than that of existing commercial electrodes such as Ti/SnO₂-Sb, PbO₂, Ru/IrO₂, and BDD. More importantly, the membrane system exhibits a desirable durability and stability during a 48-h continuous flow operation. Our findings advance the electrochemical membrane design for efficient S0 recovery from thiourea wastewater, contributing to the realization of economical and sustainable waste management and reclaiming resource.

High H2O2 production in membrane-free electrolyzer via anodic bubble shielding towards robust rural disinfection

Hydrogen peroxide (H2O2) can be sustainably synthesized through the electrochemical oxygen reduction reaction in a dual-chamber water electrolyzer separated by expensive ion exchange (IX) membranes. The development of an IX membrane-free electrolyzer has been limited by direct anodic degradation of the produced H2O2. Here, we devise a bubble shielding strategy by using a low-cost polytetrafluoroethylene hydrophobic porous layer (HPL) on the anode that enables numerous sites for anodically generated oxygen bubbles and significantly suppresses H2O2 degradation in the electrolyte. The H2O2 production increases by ~600% compared to that using non-bubble shielded anode. A high H2O2 concentration of 10.05 ± 0.05 g L-1 at 40 mA cm-2 can be obtained with both HPL-coated anode and cathode. A solar-driven disinfection device equipped with HPL-coated electrodes achieves >99.9% E. coli inactivation within 60 min. This innovative approach for achieving high electrochemical H2O2 concentrations in IX membrane-free electrolyzers more generally provides insights for fine tuning three-phase interfaces and could be applicable to other reactions pathways in electrochemical applications.

Charge Transfer Modulation in g-C3N4/CeO2 Composites: Electrocatalytic Oxygen Reduction for H2O2 Production

The electrocatalytic two-electron oxygen reduction reaction (2e-ORR) represents one of the most prospective avenues for the in situ synthesis of hydrogen peroxide (H2O2). However, the four-electron competition reaction constrains the efficiency of H2O2 synthesis. Therefore, there is an urgent need to develop superior catalysts to facilitate the H2O2 synthesis. In this study, graphite-phase carbon nitride and cerium dioxide composites (g-C3N4/CeO2) with varying CeO2 loadings were prepared with favorable 2e-ORR electrocatalysts. The optimized composite, containing 20 wt % CeO2 (g-C3N4/CeO2-20%) exhibited the highest Faradaic efficiency (FE) of 97% and notable H2O2 yielding of 9.84 mol gcat.-1 h-1 at the potential of 0.3 V (vs RHE) in a 0.1 M KOH electrolyte. Density functional theory calculations revealed that the improvement of the selectivity and yield of H2O2 for the composites were attributed to the charge transfer between g-C3N4 and CeO2, which causes the active site C atom donating electrons to form C+, thereby enhancing the adsorption and desorption of *OOH intermediates. Additionally, the g-C3N4/CeO2-20% composite exhibits excellent 2e-ORR performance in neutral and acidic electrolytes and demonstrates superior capability in electro-Fenton degradation of organic pollutants. This study not only provides new insights into the electrocatalytic mechanism of g-C3N4/CeO2 composites but also demonstrates an effective method for designing 2e-ORR catalysts.

A Chlorine-Resistant Self-Doped Nanocarbon Catalyst for Boosting Hydrogen Peroxide Synthesis in Seawater

Developing seawater-compatible hydrogen peroxide (H2O2) electroproduction technologies is crucial for advancing marine resource utilization in coastal regions. However, designing efficient and highly stable non-noble metal catalysts for two-electron oxygen reduction reaction (2e- ORR) in seawater environment remains a challenging task due to the corrosive and toxic nature of chloride ions (Cl-). Herein, we present, for the first time, a novel nitrogen and oxygen self-doped defect-rich nanocarbon (NO-DC700) catalyst, derived from silk fiber, which addresses these challenges with low toxicity, cost-effectiveness, and high adaptability. The obtained NO-DC700 catalyst demonstrates an impressive H2O2 production rate of up to 4997 mg L-1 h-1, a high Faradaic efficiency of 96.5 %, and produces 4.3 wt % H2O2 after 20 hours of stable operation, placing it among the highest-performing catalysts reported in neutral electrolytes. Theoretical calculations reveal that NO-DC700's superior 2e- ORR performance is due to the synergistic effect of graphitic nitrogen and C-OH, which inhibits Cl- adsorption and promotes *OOH adsorption. Additionally, integrating 2e- ORR with Fenton-like technology enables rapid degradation of organic pollutants and effective inactivation of seawater algae, offering significant potential for mitigating coastal eutrophication and red tide pollution. This work provides valuable insights into H2O2 electrosynthesis in seawater solution and promises advancements in ocean-energy applications.

Organogel Polymer Electrocatalysts for Two-Electron Oxygen Reduction

Polymer gels, renowned for unparalleled chemical stability and self-sustaining properties, have garnered significant attention in electrocatalysis. Notably, organic polymer gels that exhibit temperature sensitivity and incorporate suitable polar nonvolatile liquids, enhance electronic conductivity, and impart distinct morphological features, but remain largely unexplored as electrocatalysts for oxygen reduction reaction (ORR). To address this issue, an innovative strategy is proposed for synergistic modulation of the rigidity of mainchain molecular skeleton and length of alkyl sidechains, enabling the development of organogel polymers with a sol-gel temperature-sensitive phase transition that promises high selectivity and enhanced activity in electrocatalytic processes. Notably, the shortening of alkyl sidechain length can significantly affect the gelation behavior and internal microstructure of the catalyst, which modifies the electron state, ultimately impacting the catalytic activity of the gel polymer catalysts. In particular, phenyl-containing Ph-FL1 with short alkyl sidechains demonstrates outstanding 2e- ORR activity in alkaline medium, achieving a remarkable hydrogen peroxide (H2O2) selectivity of 98.6% with an impressive yield of 4.08 mol g-1 h-1. This performance surpasses most metal-free carbon-based electrocatalysts. Through theoretical calculation, the carbon atom (site-3) of C═N group is identified as potential active sites, representing a significant advancement toward designing cost-effective and efficient ORR electrocatalysts.

Balancing Activity and Selectivity in Two-Electron Oxygen Reduction through First Coordination Shell Engineering in Cobalt Single Atom Catalysts

The electrochemical two-electron oxygen reduction reaction (2e- ORR) offers a potentially cost-effective and eco-friendly route for the production of hydrogen peroxide (H2O2). However, the competing 4e- ORR that converts oxygen to water limits the selectivity towards hydrogen peroxide. Accordingly, achieving highly selective H2O2 production under low voltage conditions remains challenging. Herein, guided by first-principles density functional theory (DFT) calculations, we show that modulation the first coordination sphere in Co single atom catalysts (Co-N-C catalysts with Co-NxO4-x sites), specifically the replacement of Co-N bonds with Co-O bonds, can weaken the *OOH adsorption strength to boost the selectivity towards H2O2 (albeit with a slight decrease in ORR activity). Further, by synthesizing a series of N-doped carbon-supported catalysts with Co-NxO4-x active sites, we were able to validate the DFT findings and explore the trade-off between catalytic activity and selectivity for 2e- ORR. A catalyst with trans-Co-N2O2 sites exhibited excellent catalytic activity and H2O2 selectivity, affording a H2O2 production rate of 12.86 m o l g c a t . - 1 h - 1 ${mol\ {g}_{cat.}^{-1}{h}^{-1}{\rm \ }}$ and an half-cell energy-efficiency of 0.07 m o l H 2 O 2 g c a t . - 1 J - 1 ${{mol}_{{H}_{2}{O}_{2}}\ {g}_{cat.}^{-1}\ {J}^{-1}}$ during a 100-hours H2O2 production test in a flow-cell.

Noble-Metal-Free Electrocatalysts for Selective Hydrogen Peroxide Generation via Oxygen Reduction Reaction

Hydrogen peroxide (H2O2) is a versatile chemical widely used in various industries. The traditional anthraquinone method for H2O2 synthesis has environmental and safety concerns due to the use of organic solvents and hazardous by-products. The direct synthesis of H2O2 from H2 and O2 poses risks of flammability and explosion. Recently, the 2-electron oxygen reduction reaction (2e- ORR) method has emerged as a promising alternative, offering safety, environmental friendliness, and cost-effectiveness. This method utilizes gas diffusion electrodes to efficiently generate H2O2 without the need for additional dilution. In this review, we focus on the recent advancements in noble-metal-free materials for 2e- ORR electrocatalysis, which play a crucial role in the efficient production of H2O2. These materials, including transition metal compounds, macrocyclic complexes, carbon-based catalysts, framework materials, and MXenes catalysts, demonstrate significant advantages in enhancing H2O2 yield. The development of these non-precious metal catalysts can reduce costs and improve sustainability and promote the commercialization of related technologies. The review concludes with an outlook on the future trends of 2e- ORR electrocatalysts.

Fragmented Polymetric Carbon Nitride with Rich Defects for Boosting Electrochemical Synthesis of Hydrogen Peroxide in Alkaline and Neutral Media

Electrocatalytic oxygen reduction reaction via 2e- pathway is a safe and friendly route for hydrogen peroxide (H2O2) synthesis. In order to achieve efficient synthesis of H2O2, it is essential to accurately control the active sites. Here, fragmented polymetric carbon nitride with rich defects (DCN) is designed for H2O2 electrosynthesis. The multi-type defects, including the sodium atom doping in six-fold cavities, the boron atom doping at N-B-N sites and the cyano groups, are successfully created. Owing to the synergistic effect of these defects, the fragmented DCN achieves a high H2O2 production rate of 2.28 mol gcat. -1 h-1 and a high Faradic efficiency of nearly 90 % in alkaline media at 0.4 V vs. RHE in H-type cell. In neutral media, the H2O2 concentration produced by DCN can reach 1815 μM within 6 h at a potential of 0.2 V vs. RHE, and the H2O2 production rate of DCN is 0.23 mol gcat. -1 h-1. In addition, DCN shows excellent long-term durability in alkaline and neutral media. This study provides a new approach for the development of the boron, nitrogen doped carbon-based electrocatalysts for H2O2 electrochemical synthesis.

Single-Atom Catalysts with p-Block Metals Surpass Transition-Metal Counterparts in the Photocatalytic H2O2 Production

Growing interest in p-block metal single-atom catalysts (PM-SACs) is driven by their low toxicity, economic viability, and transition metal-like catalytic properties. However, selection criteria for p-block single-atom species and catalytic mechanisms of PM-SACs remain unclear. This study explores the catalytic abilities of PM-SACs and their transition metal counterparts (TM-SACs) based on polymetric carbon nitride (PCN) for photocatalytic hydrogen peroxide (H2O2) production. Using thermodynamic barriers as a key descriptor, it was found that PM-SACs can surpass TM-SACs in H2O2 production due to a lower energy barrier for *OOH intermediate formation resulting from optimized p-p hybridization. Specifically, Sb-SAC based on PCN shows the highest apparent quantum yield of 35.3 % at 400 nm. This study offers a rationale for the utilization of p-block SACs in the context of sustainable chemical synthesis.

Low-peroxide-consumption fenton-like systems: The future of advanced oxidation processes

Conventional heterogeneous Fenton-like systems employing different peroxides have been developed for water/wastewater remediation. However, a large population of peroxides consumed during various Fenton-like systems with low utilization efficiency and associated secondary contamination have become the bottlenecks for their actual applications. Recent strategies for lowering the peroxide consumptions to develop economic Fenton-like systems are primarily devoted to the effective radical generation and subsequent high-efficiency radical utilization through catalysts/systems engineering, leveraging emerging nonradical oxidation pathways with higher selectivity and longer life of the reactive intermediate, as well as reactor designs for promoting the mass transfer and peroxides decomposition to improve the yield of radicals/nonradicals. However, a comparative review summarizing the mechanisms and pathways of these strategies has not yet been published. In this review, we endeavor to showcase the designated systems achieving the reduction of peroxides while ensuring high catalytic activity from the perspective of the above strategic mechanisms. An in-depth understanding of these aspects will help elucidate the key mechanisms for achieving economic peroxide consumption. Finally, the existing problems of these strategies are put forward, and new ideas and research directions for lowering peroxide consumption are proposed to promote the application of various Fenton-like systems in actual wastewater purification.

Hydrogen Peroxide Electrosynthesis via Selective Oxygen Reduction Reactions Through Interfacial Reaction Microenvironment Engineering

The electrochemical two-electron oxygen reduction reaction (2e- ORR) offers a compelling alternative for decentralized and on-site H2O2 production compared to the conventional anthraquinone process. To advance this electrosynthesis system, there is growing interest in optimizing the interfacial reaction microenvironment to boost electrocatalytic performance. This review consolidates recent advancements in reaction microenvironment engineering for the selective electrocatalytic conversion of O2 to H2O2. Starting with fundamental insights into interfacial electrocatalytic mechanisms, an overview of various strategies for constructing the favorable local reaction environment, including adjusting electrode wettability, enhancing mesoscale mass transfer, elevating local pH, incorporating electrolyte additives, and employing pulsed electrocatalysis techniques is provided. Alongside these regulation strategies, the corresponding analyses and technical remarks are also presented. Finally, a summary and outlook on critical challenges, suggesting future research directions to inspire microenvironment engineering and accelerate the practical application of H2O2 electrosynthesis is delivered.

Precise manipulation of iron spin states in single-atom catalytic membranes for singlet oxygen selective production

Heterogeneous single-atom catalysts are attracting substantial attention for selectively generating singlet oxygen (1O2). However, precise manipulation of atom coordination structures remains challenging. Here, the fine coordination structure of iron single-atom carbon-nitride catalysts (Fe-CNs) was manipulated by precisely tuning the heating rate with 1 °C min-1 difference. Multiple techniques in combination with density functional theory (DFT) calculations reveal that FeN6 coordination sites with high Fe spin states promote the adsorption, electron transfer, and dissociation of peroxymonosulfate (PMS), resulting in nearly 100% selection of 1O2 generation. A lamellar single atom catalytic membrane is constructed, exhibiting high permeance, high degradation, high-salinity resistance and sustained operation stability. This work provides ideas for regulating spin states of the metal site to fabricate catalysts with selective 1O2 generation for membrane separation and environment catalysis applications.

Refining Metal-Free Carbon Nanoreactors through Electronic and Geometric Comodification for Boosted H2O2 Electrosynthesis toward Efficient Water Decontamination

Hydrogen peroxide (H2O2) electrosynthesis using metal-free carbon materials via the 2e- oxygen reduction pathway has sparked considerable research interest. However, the scalable preparation of carbon electrocatalysts to achieve satisfactory H2O2 yield in acidic media remains a grand challenge. Here, we present the design of a carbon nanoreactor series that integrates precise O/N codoping alongside well-regulated geometric structures targeting high-efficiency electrosynthesis of H2O2. Theoretical computations reveal that strategic N/O codoping facilitates partial electron transfer from C sites to O sites, realizing electronic rearrangement that optimizes C-site adsorption of *OOH. Concurrently, the O-O bond in *OOH is strengthened by charge transfer from antibonding to π-orbitals, stabilizing the O-O bond and preventing its dissociation. The carbon nanoreactor with a hollow bowl geometry also facilitates the mass transport of O2 and H2O2, achieving an H2O2 selectivity of 96% in acidic media. Furthermore, a flow cell integrated with the refined nanoreactor catalyst achieves an impressive H2O2 production rate of 2942.4 mg L-1 h-1, coupled with stable operation of nearly 80 h, surpassing the state-of-the-art metal-free analogs. The feasibility of the electro-synthesized H2O2 is further demonstrated to be highly efficient in wastewater remediation.

A Janus structured TaO/TaN heterojunction as an efficient oxygen reduction electrocatalyst for H2O2 production

A Janus TaO/TaN heterojunction hybrid with graphene exhibited excellent activity, selectivity and durability for the 2e- oxygen reduction reaction (ORR), compared to TaON@Gr, due to the optimized O2 adsorption and favored *OOH binding in the Janus TaO/TaN heterojunction. This provides a new approach for the structural design of high-performance 2e- ORR catalysts.

Fenton-Inactive Cd Enables Highly Selective O2-Derived Domino Reaction

Advancing and deploying Fenton-inactive Cd that combines excellent catalytic activity, selectivity, and stability remains a serious challenge, predominantly owing to the difficulty in regulating the intrinsic electronic states and local geometric structures of such fully occupied d10s2 configuration. In this work, a combination of experiments and theoretical calculations reveals that the incorporation of boron (B) enables the tuning of the average oxidation state of Cd0 to Cdδ+, facilitating electron localization and implementing a different electrocatalytic preference compared to conventional d10-electron configurations. The resulting Cd(B) catalyst demonstrates high selectivity (>90% on average) in the O2-to-H2O2 conversion, negligible activity loss over 100 h, and a superior H2O2 production rate (15.5 mol∙gcat -1 h-1 at -100 mA). More unexpectedly, the in situ generated H2O2 exhibits a unique advantage over commercial products, selectively oxidizing cinnamaldehyde to benzaldehyde by modulating the practical current.

In Situ Carbon Thermal Reduction to Enrich Sulfur-Vacancy in Nickel Disulfide Cathode for Efficient Synthesizing Hydrogen Peroxide

Transition metal catalysts are widely used in the 2e- ORR due to their cost-effectiveness. However, they often encounter issues related to low activity. Defect engineering are used on developing highly active catalysts, which can effectively modify active sites and promote electron transfer. Here, carbon-coated Ni3S2 (Ni3S2@C), where the additional sulfur vacancies (VS) is prepared induced by the carbon layer is coupled with active nickel sites. Through in situ and ex situ experiments combined with DFT calculations, it is demonstrated that the carbon layer can regulate the quantity of VS in Ni3S2. Materials with a higher concentration of VS exhibit enhanced 2e- ORR activity and higher H2O2 selectivity. In situ Raman spectroscopy confirms that Ni serves as the key active site in this catalyst. DFT calculations indicate that the OOH binding energy (ΔG) decreases with an increase in the number of VS, favoring the protonation of *OOH to generate H2O2. Upon performance testing, the average H2O2 selectivity is 92.3%, with the highest yield reaching up to 3860 mmol gcat-1 h-1. It is noteworthy that Ni3S2@C exhibits high stability, with only a slight decrease in 2e- pathway selectivity after 5000 cycles of ADT.

How to Assess and Predict Electrical Double Layer Properties. Implications for Electrocatalysis

The electrical double layer (EDL) plays a central role in electrochemical energy systems, impacting charge transfer mechanisms and reaction rates. The fundamental importance of the EDL in interfacial electrochemistry has motivated researchers to develop theoretical and experimental approaches to assess EDL properties. In this contribution, we review recent progress in evaluating EDL characteristics such as the double-layer capacitance, highlighting some discrepancies between theory and experiment and discussing strategies for their reconciliation. We further discuss the merits and challenges of various experimental techniques and theoretical approaches having important implications for aqueous electrocatalysis. A strong emphasis is placed on the substantial impact of the electrode composition and structure and the electrolyte chemistry on the double-layer properties. In addition, we review the effects of temperature and pressure and compare solid-liquid interfaces to solid-solid interfaces.

Electrocatalysts for the Formation of Hydrogen Peroxide by Oxygen Reduction Reaction

Hydrogen peroxide (H2O2) is a widely used strong oxidant, and its traditional preparation methods, anthraquinone method, and direct synthesis method, have many drawbacks. The method of producing H2O2 by two-electron oxygen reduction reaction (2e- ORR) is considered an alternative strategy for the traditional anthraquinone method due to its high efficiency, energy saving, and environmental friendliness, but it remains a big challenge. In this review, we have described the mechanism of ORR and the principle of electrocatalytic performance testing, and have summarized the standard performance evaluation techniques for electrocatalysts to produce H2O2. Secondly, according to the theoretical calculation and experimental results, several kinds of efficient electrocatalysts are introduced. It is concluded that noble metal-based materials, carbon-based materials, non-noble metal composites, and single-atom catalysts are the preferred catalyst materials for the preparation of H2O2 by 2e- ORR. Finally, the advantages and novelty of 2e- ORR compared with traditional methods for H2O2 production, as well as the advantages and disadvantages of the above-mentioned high-efficiency catalysts, are summarized. The application prospect and development direction of high-efficiency catalysts for H2O2 production by 2e- ORR has been prospected, which is of great significance for promoting the electrochemical yield of H2O2 and developing green chemical production.

Efficient H2O2 Synthesis Through a Two-Electron Oxygen Reduction Reaction by Electrocatalysts

The two-electron oxygen reduction reaction (2e-ORR) for the sustainable synthesis of hydrogen peroxide (H2O2) has demonstrated considerable potential for local production of this environmentally friendly chemical oxidant on small, medium, and large scales. This method offers a promising alternative to the energy-intensive anthraquinone approach, placing a primary emphasis on the development of efficient electrocatalysts. Improving the efficiency of electrocatalysts and uncovering their catalytic mechanisms are essential steps in achieving high 2e-ORR activity, selectivity, and stability. This comprehensive review summarizes recent advancements in electrocatalysts for in-situ H2O2 production, providing a detailed overview of the field. In particular, the review delves into the design, fabrication, and investigation of catalytic active sites contributing to H2O2 selectivity. Additionally, it highlights a range of electrocatalysts including pure metals and alloys, transition metal compounds, single-atom catalysts, and carbon-based catalysts for the 2e-ORR pathway. Finally, the review addresses significant challenges and opportunities for efficient H2O2 electrosynthesis, as well as potential future research directions.

Synergistic Active Heterostructure Design for Enhanced Two Electron Oxygen Reduction via Chemical and Electrochemical Reconstruction of Heterosulfides

Transition metal sulfides, particularly heterostructures, represent a promising class of electrocatalysts for two electron oxygen reduction (2e- ORR), however, understanding the dynamic structural evolution of these catalysts during alkaline ORR remains relatively unexplored. Herein, NiS2/In2.77S4 heterostructure was synthesized as a precatalyst and through a series of comprehensive ex situ and in situ characterizations, including X-ray absorption spectroscopy, Raman spectroscopy, transient photo-induced voltage measurements, electron energy loss spectroscopy, and spherical aberration-corrected electron microscopy, it was revealed that nickel/indium (oxy)hydroxides (NiOOH/In(OH)3) could be evolved from the initial NiS2/In2.77S4 via both electrochemical and chemical-driven methods. The electrochemical-driven phase featured abundant bridging oxygen-deficient [NiO6]-[InO6] units at the interfaces of NiOOH/In(OH)3, facilitating a synergistic effect between active Ni and In sites, thus enabling an enhanced alkaline 2e- ORR capability than that of chemical-driven process. Remarkably, electrochemically induced NiOOH/In(OH)3 exhibited exceptional performance, achieving H2O2 selectivity of >90 % across the wide potential window (up to 0.4 V) with a peak selectivity of >99 %. Notably, within the three-electrode flow cell, a current density of 200 mA cm-2 was sustained over 20 h, together with an impressive Faradaic efficiency of ~90 % during the whole cycle process.

Progress and Opportunities in Photocatalytic, Electrocatalytic, and Photoelectrocatalytic Production of Hydrogen Peroxide Coupled with Biomass Valorization

Hydrogen peroxide (H2O2) has been considered an energy carrier (fuel) and oxidizer for various chemical synthesis and environmental remediation processes. Biomass valorization can generate high-value-added products in a green and pollution-free way to solve the energy and environmental crisis. The biomass valorization coupled with H2O2 generation via photo-, electro-, and photoelectrocatalysis plays a positive role in sustainable targets, which can maximize energy utilization and realize the production of value-added products and fuel synthesis. Recently, catalyst design and mechanism studies in H2O2 generation coupled with biomass valorization are in the infancy stage. Herein, this review begins with a background on photo-, electro-, and photoelectrocatalytic techniques for H2O2 generation, biomass valorization, and the H2O2 generation couples with biomass valorization. Meanwhile, the progress and reaction mechanism are reviewed. Finally, the prospects and challenges of a synergistic coupled system of H2O2 synthesis and value-added biomass in achieving high conversion, selectivity, and reaction efficiency are envisioned.

Topology Control of Covalent Organic Frameworks with Interlaced Unsaturated 2D and Saturated 3D Units for Boosting Electrocatalytic Hydrogen Peroxide Production

Modulating the electronic state of multicomponent covalent organic framework (COF) electrocatalysts is crucial for enhancing catalytic activity. However, the effect of dimensionality on their physicochemical functionalities is still lacking. Herein, we report an interlaced unsaturated 2D and saturated 3D strategy to develop multicomponent-regulated COFs with tunable gradient dimensionality for high selectivity and activity electrocatalysis. Compared with the two-component 2D and 3D model COFs, the 2D/3D framework interlaced COFs with locally irregular dimensions and electronic structures are more practical in optimizing the intrinsic electrode surface reaction and mass transfer. Remarkably, the unsaturated 2D-inserted 3D TAE-COF regulates the adsorption mode of OOH* species to supply a favorable dynamic pathway for the H2O2 process, thereby achieving an excellent production rate of 8.50 mol gcat -1 h-1. Moreover, utilizing theoretical calculation and in situ ATR-FTIR experiment, we found that the central carbon atom of the tetraphenyl-based unit (site-1 and site-6) are potential active sites. This strategy of operating the adsorption ability of reactants with dimensionality-interconnected building blocks provides an idea for designing durable and efficient electrocatalysts.

High-Energy Polynitrogen N10 Stabilized on Multi-Walled Carbon Nanotubes

The synthesis of stable polynitrogen compounds with high-energy density has long been a major challenge. The cyclo-pentazolate anion (cyclo-N5 -) is successfully converted into aromatic and structurally symmetric bipentazole (N10) via electrochemical synthesis using highly conductive multi-walled carbon nanotubes (MWCNTs) as the substrate and sodium pentazolate hydrate ([Na(H2O)(N5)]·2H2O) as the raw material. Attenuated total refraction Fourier transform infrared spectroscopy, Raman spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, and density functional theory calculations confirmed the structure and homogeneous distribution of N10 in the sidewalls of the MWCNTs (named MWCNT-N10-n m). The MWCNT-N10-2.0 m is further used as a catalyst for electrochemical oxygen reduction to synthesize hydrogen peroxide from oxygen with a two-electron selectivity of up to 95%.

Advanced Nanocarbons Toward two-Electron Oxygen Electrode Reactions for H2O2 Production and Integrated Energy Conversion

Hydrogen peroxide (H2O2) plays a pivotal role in advancing sustainable technologies due to its eco-friendly oxidizing capability. The electrochemical two-electron (2e-) oxygen reduction reaction and water oxidation reaction present an environmentally green method for H2O2 production. Over the past three years, significant progress is made in the field of carbon-based metal-free electrochemical catalysts (C-MFECs) for low-cost and efficient production of H2O2 (H2O2EP). This article offers a focused and comprehensive review of designing C-MFECs for H2O2EP, exploring the construction of dual-doping configurations, heteroatom-defect coupling sites, and strategic dopant positioning to enhance H2O2EP efficiency; innovative structural tuning that improves interfacial reactant concentration and promote the timely release of H2O2; modulation of electrolyte and electrode interfaces to support the 2e- pathways; and the application of C-MFECs in reactors and integrated energy systems. Finally, the current challenges and future directions in this burgeoning field are discussed.

Anionic Surfactant-Modulated Electrode-Electrolyte Interface Promotes H2O2 Electrosynthesis

Conventional strategies for highly selective and active hydrogen peroxide (H2O2) electrosynthesis primarily focus on catalyst design. Electrocatalytic reactions take place at the electrified electrode-electrolyte interface. Well-designed electrolytes, when combined with commercial catalysts, can be directly applied to high-efficiency H2O2 electrosynthesis. However, the role of electrolyte components is equally crucial but is significantly under-researched. In this study, anionic surfactant n-tetradecylphosphonic acid (TDPA) and its analogs are used as electrolyte additives to enhance the selectivity of the two-electron oxygen reduction reaction. Mechanistic studies reveal that TDPA assembled over the electrode-electrolyte interface modulates the electrical double-layer structure, which repels interfacial water and weakens the hydrogen-bond network for proton transfer. Additionally, the hydrophilic phosphonate moiety affects the coordination of water molecules in the solvation shell, thereby directly influencing the proton-coupled kinetics at the interface. The TDPA-containing catalytic system achieves a Faradaic efficiency of H2O2 production close to 100% at a current density of 200 mA cm-2 using commercial carbon black catalysts. This research provides a simple strategy to enhance H2O2 electrosynthesis by adjusting the interfacial microenvironment through electrolyte design.

Bifunctional Oxygen-Defect Bismuth Catalyst toward Concerted Production of H2O2 with over 150% Cell Faradaic Efficiency in Continuously Flowing Paired-Electrosynthesis System

The electrosynthesis of hydrogen peroxide (H2O2) from O2 or H2O via the two-electron (2e-) oxygen reduction (2e- ORR) or water oxidation (2e- WOR) reaction provides a green and sustainable alternative to the traditional anthraquinone process. Herein, a paired-electrosynthesis tactic is reported for concerted H2O2 production at a high rate by coupling the 2e- ORR and 2e- WOR, in which the bifunctional oxygen-vacancy-enriched Bi2O3 nanorods (Ov-Bi2O3-EO), obtained through electrochemically oxidative reconstruction of Bi-based metal-organic framework (Bi-MOF) nanorod precursor, are used as both efficient anodic and cathodic electrocatalysts, achieving concurrent H2O2 production at both electrodes with high Faradaic efficiencies. Specifically, the coupled 2e- ORR//2e- WOR electrolysis system based on such distinctive oxygen-defect Bi catalyst displays excellent performance for the paired-electrosynthesis of H2O2, delivering a remarkable cell Faradaic efficiency of 154.8% and an ultrahigh H2O2 production rate of 4.3 mmol h-1 cm-2. Experiments combined with theoretical analysis reveal the crucial role of oxygen vacancies in optimizing the adsorption of intermediates associated with the selective two-electron reaction pathways, thereby improving the activity and selectivity of the 2e- reaction processes at both electrodes. This work establishes a new paradigm for developing advanced electrocatalysts and designing novel paired-electrolysis systems for scalable and sustainable H2O2 electrosynthesis.

Low-Coordinated Conductive ZnCu Metal-Organic Frameworks for Highly Selective H2O2 Electrosynthesis

Direct electrosynthesis of hydrogen peroxide (H2O2) with high production rate and high selectivity through the two-electron oxygen reduction reaction (2e-ORR) offers a sustainable alternative to the energy-intensive anthraquinone technology but remains a challenge. Herein, a low-coordinated, 2D conductive Zn/Cu metal-organic framework supported on hollow nanocube structures (ZnCu-MOF (H)) is rationally designed and synthesized. The as-prepared ZnCu-MOF (H) catalyst exhibits substantially boosted electrocatalytic kinetics, enhanced H2O2 selectivity, and ultra-high Faradaic efficiency for 2e-ORR process in both alkaline and neutral conditions. Electrochemical measurements, operando/quasi in situ spectroscopy, and theoretical calculation demonstrate that the introduction of Cu atoms with low-coordinated structures induces the transformation of active sites, resulting in the beneficial electron transfer and the optimized energy barrier, thereby improving the electrocatalytic activity and selectivity.

Advancing H2O2 electrosynthesis: enhancing electrochemical systems, unveiling emerging applications, and seizing opportunities

Hydrogen peroxide (H2O2) is a highly desired chemical with a wide range of applications. Recent advancements in H2O2 synthesis center on the electrochemical reduction of oxygen, an environmentally friendly approach that facilitates on-site production. To successfully implement practical-scale, highly efficient electrosynthesis of H2O2, it is critical to meticulously explore both the design of catalytic materials and the engineering of other components of the electrochemical system, as they hold equal importance in this process. Development of promising electrocatalysts with outstanding selectivity and activity is a prerequisite for efficient H2O2 electrosynthesis, while well-configured electrolyzers determine the practical implementation of large-scale H2O2 production. In this review, we systematically summarize fundamental mechanisms and recent achievements in H2O2 electrosynthesis, including electrocatalyst design, electrode optimization, electrolyte engineering, reactor exploration, potential applications, and integrated systems, with an emphasis on active site identification and microenvironment regulation. This review also proposes new insights into the existing challenges and opportunities within this rapidly evolving field, together with perspectives on future development of H2O2 electrosynthesis and its industrial-scale applications.

Sustainable electro-Fenton simultaneous reduction of Cr (VI) and degradation of organic pollutants via dual-site porous carbon cathode driving uncoordinated molybdenum sites conversion

Simultaneous removal of heavy metals and organic contaminants remains a substantial challenge in the electro-Fenton (EF) system. Herein, we propose a facile and sustainable "iron-free" EF system capable of simultaneously removing hexavalent chromium (Cr (VI)) and para-chlorophenol (4-CP). The system comprises a nitrogen-doped and carbon-deficient porous carbon (dual-site NPC-D) cathode coupled with a MoS2 nanoarray promoter (MoS2 NA). The NPC-D/MoS2 NA system exhibits exceptional synergistic electrocatalytic activity, with removal rates for Cr (VI) and 4-CP that are 20.3 and 4.4 times faster, respectively, compared to the NPC-D system. Mechanistic studies show that the dual-site structure of NPC-D cathode favors the two-electron oxygen reduction pathway with a selectivity of 81 %. Furthermore, an electric field-driven uncoordinated Mo valence state conversion of MoS2 NA enchances the generation of dynamic singlet oxygen and hydroxyl radicals. Notably, this system shows outstanding recyclability, resilience in real wastewater, and sustainability during a 3 L scale-up operation, while effectively mitigating toxicity. Overall, this study presents an effective approach for treating multiple-component wastewater and highlights the importance of structure-activity correlation in synergistic electrocatalysis.

In-Plane Topological-Defect-Enriched Graphene as an Efficient Metal-Free Catalyst for pH-Universal H2O2 Electrosynthesis

Developing efficient metal-free catalysts to directly synthesize hydrogen peroxide (H2O2) through a 2-electron (2e) oxygen reduction reaction (ORR) is crucial for substituting the traditional energy-intensive anthraquinone process. Here, in-plane topological defects enriched graphene with pentagon-S and pyrrolic-N coordination (SNC) is synthesized via the process of hydrothermal and nitridation. In SNC, pentagon-S and pyrrolic-N originating from thiourea precursor are covalently grafted onto the basal plane of the graphene framework, building unsymmetrical dumbbell-like S─C─N motifs, which effectively modulates atomic and electronic structures of graphene. The SNC catalyst delivers ultrahigh H2O2 productivity of 8.1, 7.3, and 3.9 mol gcatalyst -1 h-1 in alkaline, neutral, and acidic electrolytes, respectively, together with long-term operational stability in pH-universal electrolytes, outperforming most reported carbon catalysts. Theoretical calculations further unveil that defective S─C─N motifs efficiently optimize the binding strength to OOH* intermediate and substantially diminish the kinetic barrier for reducing O2 to H2O2, thereby promoting the intrinsic activity of 2e-ORR.

Stable Pentagonal Layered Palladium Diselenide Enables Rapid Electrosynthesis of Hydrogen Peroxide

Electrosynthesis of hydrogen peroxide (H2O2) via the two-electron oxygen reduction reaction (2e- ORR) is promising for various practical applications, such as wastewater treatment. However, few electrocatalysts are active and selective for 2e- ORR yet are also resistant to catalyst leaching under realistic operating conditions. Here, a joint experimental and computational study reveals active and stable 2e- ORR catalysis in neutral media over layered PdSe2 with a unique pentagonal puckered ring structure type. Computations predict active and selective 2e- ORR on the basal plane and edge of PdSe2, but with distinct kinetic behaviors. Electrochemical measurements of hydrothermally synthesized PdSe2 nanoplates show a higher 2e- ORR activity than other Pd-Se compounds (Pd4Se and Pd17Se15). PdSe2 on a gas diffusion electrode can rapidly accumulate H2O2 in buffered neutral solution under a high current density. The electrochemical stability of PdSe2 is further confirmed by long device operational stability, elemental analysis of the catalyst and electrolyte, and synchrotron X-ray absorption spectroscopy. This work establishes a new efficient and stable 2e- ORR catalyst at practical current densities and opens catalyst designs utilizing the unique layered pentagonal structure motif.

General Design Concept of High-Performance Single-Atom-Site Catalysts for H2O2 Electrosynthesis

Hydrogen peroxide (H2O2) as a green oxidizing agent is widely used in various fields. Electrosynthesis of H2O2 has gradually become a hotspot due to its convenient and environment-friendly features. Single-atom-site catalysts (SASCs) with uniform active sites are the ideal catalysts for the in-depth study of the reaction mechanism and structure-performance relationship. In this review, the outstanding achievements of SASCs in the electrosynthesis of H2O2 through 2e- oxygen reduction reaction (ORR) and 2e- water oxygen reaction (WOR) in recent years, are summarized. First, the elementary steps of the two pathways and the roles of key intermediates (*OOH and *OH) in the reactions are systematically discussed. Next, the influence of the size effect, electronic structure regulation, the support/interfacial effect, the optimization of coordination microenvironments, and the SASCs-derived catalysts applied in 2e- ORR are systematically analyzed. Besides, the developments of SASCs in 2e- WOR are also overviewed. Finally, the research progress of H2O2 electrosynthesis on SASCs is concluded, and an outlook on the rational design of SASCs is presented in conjunction with the design strategies and characterization techniques.

Covalent Organic Frameworks Based Electrocatalysts for Two-Electron Oxygen Reduction Reaction: Design Principles, Recent Advances, and Perspective

Hydrogen peroxide (H2O2) is an environmentally friendly oxidant with a wide range of applications, and the two-electron pathway (2e-) of the oxygen reduction reaction (ORR) for H2O2 production has attracted much attention due to its eco-friendly nature and operational simplicity in contrast to the conventional anthraquinone process. The challenge is to design electrocatalysts with high activity and selectivity and to understand their structure-activity relationship and catalytic mechanism in the ORR process. Covalent organic frameworks (COFs) provide an efficient template for the construction of highly efficient electrocatalysts due to their designable structure, excellent stability, and controllable porosity. This review firstly outlines the design principles of COFs, including the selection of metallic and nonmetallic active sites, the modulation of the electronic structure of the active sites, and the dimensionality modulation of the COFs, to provide guidance for improving the production performance of H2O2. Subsequently, representative results are summarized in terms of both metallic and metal-free sites to follow the latest progress. Moreover, the challenges and perspectives of 2e- ORR electrocatalysts based on COFs are discussed.

Oxygen-containing functional groups in Fe3O4@three-dimensional graphene nanocomposites for enhancing H2O2 production and orientation to 1O2 in electro-Fenton

In electro-Fenton (EF), development of a bifunctional electrocatalyst to realize simultaneous H2O2 generation and activation efficiently for generating reactive species remains a challenge. In particular, a nonradical-mediated EF is more favorable for actual wastewater remediation, and deserves more attention. In this study, three-dimensional graphene loaded with Fe3O4 nanoparticles (Fe3O4@3D-GNs) with abundant oxygen-containing functional groups (OFGs) was synchronously synthesized using a NaCl-template method and served as a cathode to establish a highly efficient and selective EF process for contaminant degradation. The amounts of OFGs can be effectively modulated via the pyrolysis temperature to regulate the 2e- oxygen reduction reaction activity and reactive oxygen species (ROS) production. The optimized Fe3O4@3D-GNs synthesized at 750 °C (Fe3O4@3D-GNs-750) with the highest -C-O-C and -C꞊O group ratios exhibited the maximum H2O2 and 1O2 yields during electrocatalysis, thus showing remarkable versatility for eliminating organic contaminants from surface water bodies. Experiments and theoretical calculations have demonstrated the dominant role of -C-O-C in generating H2O2 and the positive influence of -C꞊O sites on the production of 1O2. Moreover, the surface-bound Fe(II) favors the generation of surface-bound •OH, which steers a more favorable oxidative conversion of H2O2 to 1O2. Fe3O4@3D-GNs were proven to be less pH-dependent, low-energy, stable, and recyclable for practical applications in wastewater purification. This study provides an innovative strategy to engineer active sites to achieve the selective electrocatalysis for eliminating pollution and reveals a novel perspective for 1O2-generation mechanism in the Fenton reaction.

Study on Influence Factors of H2O2 Generation Efficiency on Both Cathode and Anode in a Diaphragm-Free Bath

Electrosynthesis of H2O2 via both pathways of anodic two-electron water oxidation reaction (2e-WOR) and cathodic two-electron oxygen reduction reaction (2e-ORR) in a diaphragm-free bath can not only improve the generation rate and Faraday efficiency (FE), but also simplify the structure of the electrolysis bath and reduce the energy consumption. The factors that may affect the efficiency of H2O2 generation in coupled electrolytic systems have been systematically investigated. A piece of fluorine-doped tin oxide (FTO) electrode was used as the anode, and in this study, its catalytic performance for 2e-WOR in Na2CO3/NaHCO3 and NaOH solutions was compared. Based on kinetic views, the generation rate of H2O2 via 2e-WOR, the self-decomposition, and the oxidative decomposition rate of the generated H2O2 during electrolysis in carbonate electrolytes were investigated. Furthermore, by choosing polyethylene oxide-modified carbon nanotubes (PEO-CNTs) as the catalyst for 2e-ORR and using its loaded electrode as the cathode, the coupled electrolytic systems for H2O2 generation were set up in a diaphragm bath and in a diaphragm-free bath. It was found that the generated H2O2 in the electrolyte diffuses and causes oxidative decomposition on the anode, which is the main influent factor on the accumulated concentration in H2O2 in a diaphragm-free bath.

Enhancing H2O2 Electrosynthesis at Industrial-Relevant Current in Acidic Media on Diatomic Cobalt Sites

Electrocatalytic synthesis of hydrogen peroxide (H2O2) in acidic media is an efficient and eco-friendly approach to produce inherently stable H2O2, but limited by the lack of selective and stable catalysts under industrial-relevant current densities. Herein, we report a diatomic cobalt catalyst for two-electron oxygen reduction to efficiently produce H2O2 at 50-400 mA cm-2 in acid. Electrode kinetics study shows a >95% selectivity for two-electron oxygen reduction on the diatomic cobalt sites. In a flow cell device, a record-high production rate of 11.72 mol gcat-1 h-1 and exceptional long-term stability (100 h) are realized under high current densities. In situ spectroscopic studies and theoretical calculations reveal that introducing a second metal into the coordination sphere of the cobalt site can optimize the binding strength of key H2O2 intermediates due to the downshifted d-band center of cobalt. We also demonstrate the feasibility of processing municipal plastic wastes through decentralized H2O2 production.

Recent Approaches for Cleaving the C─C Bond During Ethanol Electro-Oxidation Reaction

Direct ethanol fuel cells (DEFCs) play an indispensable role in the cyclic utilization of carbon resources due to its high volumetric energy density, high efficiency, and environmental benign character. However, owing to the chemically stable carbon-carbon (C─C) bond of ethanol, its incomplete electrooxidation at the anode severely inhibits the energy and power density output of DEFCs. The efficiency of C─C bond cleaving on the state-of-the-art Pt or Pd catalysts is reported as low as 7.5%. Recently, tremendous efforts are devoted to this field, and some effective strategies are put forward to facilitate the cleavage of the C─C bond. It is the right time to summarize the major breakthroughs in ethanol electrooxidation reaction. In this review, some optimization strategies including constructing core-shell nanostructure with alloying effect, doping other metal atoms in Pt and Pd catalysts, engineering composite catalyst with interface synergism, introducing cascade catalytic sites, and so on, are systematically summarized. In addition, the catalytic mechanism as well as the correlations between the catalyst structure and catalytic efficiency are further discussed. Finally, the prevailing limitations and feasible improvement directions for ethanol electrooxidation are proposed.

Oxygen-doped carbon nanotubes with dual active cites to enhance •OH formation through three electron oxygen reduction

The electro-Fenton (EF) process generates H2O2 through the 2e- oxygen reduction reaction (ORR), which is subsequently activated to •OH by iron-based catalysts. To alleviate the potential risk of external Fe-based catalysts, along with metal dissolution in acidic or neutral environments, in this study we employed oxygen-doped carbon nanotubes (OCNT) as a bifunctional, metal-free cathode to establish a metal-free EF process for organic pollutant degradation. The results demonstrate that the metal-free electrode has excellent H2O2 accumulation (12 mg L-1 cm-1) and degrades sulfathiazole (STZ) with 97.05 % efficiency in 180 min with an explanation kinetic of 0.0189 min-1. For the first time, this enhancement came from the dual active site centers in OCNT: Ⅰ) -COOH and defects active sites were responsible for H2O2 production, Ⅱ) then -CO triggered H2O2 into •OH, avoiding the introduction of metal-based catalysts. These findings suggest that the EF system with in situ oxygen-doped cathodes have great potential for treating antibiotic wastewater.

Metal-organic framework-derived two-dimensional in-plane Janus catalysts promoting oxygen electroreduction to hydrogen peroxide

We use MOFs material as precursor to synthesize carbon based two-dimensional (2D) materials loaded with In2 S3 -In2 O3 (In-S-O) nanoparticles. The In-S-O nanoparticles have exhibited Janus architecture composed of two compounds with different crystal structures that are combined in-plane on 2D carbon material surface. The excellent properties of this in-plane Janus material include 2D nanoarchitecture and its Janus properties formed by combining two different crystal structures. It has exhibited excellent electrochemical performances due to its abundant electrochemical active sites and large specific surface area. According to experiments, the electron transfer number of the material for two-electron oxygen reduction is about 2.4, and the hydrogen peroxide yield is 32 mg/h cm2 . In the further test of liquid flow electrolytic cell, the yield can reach up to 172 mg/h cm2 .

Nanoengineering of Porous 2D Structures with Tunable Fluid Transport Behavior for Exceptional H2O2 Electrosynthesis

Precision nanoengineering of porous two-dimensional structures has emerged as a promising avenue for finely tuning catalytic reactions. However, understanding the pore-structure-dependent catalytic performance remains challenging, given the lack of comprehensive guidelines, appropriate material models, and precise synthesis strategies. Here, we propose the optimization of two-dimensional carbon materials through the utilization of mesopores with 5-10 nm diameter to facilitate fluid acceleration, guided by finite element simulations. As proof of concept, the optimized mesoporous carbon nanosheet sample exhibited exceptional electrocatalytic performance, demonstrating high selectivity (>95%) and a notable diffusion-limiting disk current density of -3.1 mA cm-2 for H2O2 production. Impressively, the electrolysis process in the flow cell achieved a production rate of 14.39 mol gcatalyst-1 h-1 to yield a medical-grade disinfectant-worthy H2O2 solution. Our pore engineering research focuses on modulating oxygen reduction reaction activity and selectivity by affecting local fluid transport behavior, providing insights into the mesoscale catalytic mechanism.

Porous Electropolymerized Films of Ruthenium Complex: Photoelectrochemical Properties and Photoelectrocatalytic Synthesis of Hydrogen Peroxide

The photoelectrochemical cells (PECs) performing high-efficiency conversions of solar energy into both electricity and high value-added chemicals are highly desirable but rather challenging. Herein, we demonstrate that a PEC using the oxidatively electropolymerized film of a heteroleptic Ru(II) complex of [Ru(bpy)(L)2](PF6)2Ru1 {bpy and L stand for 2,2'-bipyridine and 1-phenyl-2-(4-vinylphenyl)-1H-imidazo[4,5-f][1,10]phenanthroline respectively}, polyRu1, as a working electrode performed both efficient in situ synthesis of hydrogen peroxide and photocurrent generation/switching. Specifically, when biased at -0.4 V vs. saturated calomel electrode and illuminated with 100 mW·cm-2 white light, the PEC showed a significant cathodic photocurrent density of 9.64 μA·cm-2. Furthermore, an increase in the concentrations of quinhydrone in the electrolyte solution enabled the photocurrent polarity to switch from cathodic to anodic, and the anodic photocurrent density reached as high as 11.4 μA·cm-2. Interestingly, in this single-compartment PEC, the hydrogen peroxide yield reached 2.63 μmol·cm-2 in the neutral electrolyte solution. This study will serve as a guide for the design of high-efficiency metal-complex-based molecular systems performing photoelectric conversion/switching and photoelectrochemical oxygen reduction to hydrogen peroxide.

Mesoporous carbon spheres with programmable interiors as efficient nanoreactors for H2O2 electrosynthesis

The nanoreactor holds great promise as it emulates the natural processes of living organisms to facilitate chemical reactions, offering immense potential in catalytic energy conversion owing to its unique structural functionality. Here, we propose the utilization of precisely engineered carbon spheres as building blocks, integrating micromechanics and controllable synthesis to explore their catalytic functionalities in two-electron oxygen reduction reactions. After conducting rigorous experiments and simulations, we present compelling evidence for the enhanced mass transfer and microenvironment modulation effects offered by these mesoporous hollow carbon spheres, particularly when possessing a suitably sized hollow architecture. Impressively, the pivotal achievement lies in the successful screening of a potent, selective, and durable two-electron oxygen reduction reaction catalyst for the direct synthesis of medical-grade hydrogen peroxide disinfectant. Serving as an exemplary demonstration of nanoreactor engineering in catalyst screening, this work highlights the immense potential of various well-designed carbon-based nanoreactors in extensive applications.

Pd 4d Orbital Overlapping Modulation on Au@Pd Nanowires for Efficient H2O2 Production

Isolating Pd atoms has been shown to be crucial for the design of a Pd-based electrocatalyst toward 2e- oxygen reduction reaction (ORR). However, there are limited studies focusing on the systematic compositional design that leads to an optimal balance between activity and selectivity. Herein, we design a series of Au@Pd core@shell structures to investigate the influence of the Pd 4d orbital overlapping degree on 2e- ORR performance. Density functional theory (DFT) calculations indicate that enhanced H2O2 selectivity and activity are achieved at Pdn clusters with n ≤ 3, and Pd clusters larger than Pd3 should be active for 4e- ORR. However, experimental results show that Au@Pd nanowires (NWs) with Pd4 as the primary structure exhibit the optimal H2O2 performance in an acidic electrolyte with a high mass activity (7.05 A mg-1 at 0.4 V) and H2O2 selectivity (nearly 95%). Thus, we report that Pd4, instead of Pd3, is the upper threshold of Pd cluster size for an ideal 2e- ORR. It results from the oxygen coverage on the catalyst surface during the ORR process, and such an oxygen coverage phenomenon causes electron redistribution and weakened *OOH binding strength on active sites, leading to enhanced activity of Pd4 with only 0.06 V overpotential in acidic media.

Electrocatalytic degradation of p-nitrophenol on metal-free cathode: Superoxide radical (O2•-) production via molecular oxygen activation

Although metal-free electrodes in molecular oxygen-activated Fenton-like wastewater treatment technologies have been developed, the reactive oxygen species (ROS) generation mechanisms are still not sufficiently clear. As a typical example of refractory phenolic wastewater, p-nitrophenol (PNP) has been widely studied. This study demonstrated the critical role of superoxide radicals (O2•-) in PNP degradation by metal-free electrodes through electron spin resonance (ESR), ROS quenching, and density functional theory (DFT) tests. The most superior metal-free electrode exhibited a mass activity of approximately 133.5 h-1 gcatalyst-1. Experimental and theoretical studies revealed the mechanism of O2•- generation via oxygen activation, including one- and three-electron transfer pathways, and found that O2•- mainly attacked the nitro group of PNP to degrade and transform the pollutant. This study enhances the mechanistic understanding of metal-free materials in the electrochemical degradation of refractory pollutants.

Heteroatom-Coordinated Palladium Molecular Catalysts for Sustainable Electrochemical Production of Hydrogen Peroxide

Currently, hydrogen peroxide (H2O2) manufacturing involves an energy-intensive anthraquinone technique that demands expensive solvent extraction and a multistep process with substantial energy consumption. In this work, we synthesized Pd-N4-CO, Pd-S4-NCO, and Pd-N2O2-C single-atom catalysts via an in situ synthesis approach involving heteroatom-rich ligands and activated carbon under mild reaction conditions. It reveals that palladium atoms interact strongly with heteroatom-rich ligands, which provide well-defined and uniform active sites for oxygen (O2) electrochemically reduced to hydrogen peroxide. Interestingly, the Pd-N4-CO electrocatalyst shows excellent performance for the electrocatalytic reduction of O2 to H2O2 via a two-electron transfer process in a base electrolyte, exhibiting a negligible amount of onset overpotential and >95% selectivity within a wide range of applied potentials. The electrocatalysts based on the activity and selectivity toward 2e- ORR follow the order Pd-N4-CO > Pd-N2O2-C > Pd-S4-NCO in agreement with the pull-push mechanism, which is the Pd center strongly coordinated with high electronegativity donor atoms (N and O atoms) and weakly coordinated with the intermediate *OOH to excellent selectivity and sustainable production of H2O2. According to density functional theory, Pd-N4 is the active site for selectivity toward H2O2 generation. This work provides an emerging technique for designing high-performance H2O2 electrosynthesis catalysts and the rational integration of several active sites for green and sustainable chemical synthesis via electrochemical processes.

Unlocking the Potential of Nanobubbles: Achieving Exceptional Gas Efficiency in Electrogeneration of Hydrogen Peroxide

The electrogeneration of hydrogen peroxide (H2 O2 ) via the oxygen reduction reaction is a crucial process for advanced water treatment technologies. While significant effort is being devoted to developing highly reactive materials, gas provision systems used in these processes are receiving less attention. Here, using oxygen nanobubbles to improve the gas efficiency of the electrogeneration of H2 O2 is proposed. Aeration with nanobubbles is compared to aeration with macrobubbles under an identical experimental set-up, with nanobubbles showing a much higher gas-liquid volumetric mass transfer coefficient (KL a) of 2.6 × 10-2 min-1 compared to 2.7 × 10-4 min-1 for macrobubbles. Consequently, nanobubbles exhibit a much higher gas efficiency using 60% of O2 delivered to the system compared to 0.19% for macrobubbles. Further, it is observed that the electrogeneration of H2 O2 using carbon felt electrodes is enhanced using nanobubbles. Under the same dissolved oxygen levels, nanobubbles boost the reaction yield to 84%, while macrobubbles yield only 53.8%. To the authors' knowledge, this is the first study to investigate the use of nanobubbles in electrochemical reactions and demonstrate their ability to enhance gas efficiency and electrocatalytic response. These findings have important implications for developing more efficient chemical and electrochemical processes operating under gas-starving systems.

Gaining insight into the impact of electronic property and interface electrostatic field on ORR kinetics in alloy engineering via theoretical prognostication and experimental validation

Alloy engineering has been utilized as a potent strategy to modulate the oxygen reduction reaction （ORR） activity. However, the regulatory mechanism underpinning the ORR kinetics by means of alloy engineering is still shrouded in ambiguity. This work places emphasis on the kinetics of the ORR concerning Pt3M (M = Cr, Co, Cu, Pd, Sn, and Ir) catalysts, and integrates theoretical prognostication and experimental validation to illuminate the fundamental principles of alloy engineering. The ORR kinetic activity, as prognosticated by theory, shows significant agreement with experimental results, provided that the rate-determining step (RDS) accounts for a dominant role in the potential-independent kinetic mechanism. In essence, alloy engineering manipulates electronic properties through electron transfer to modulate intermediate adsorption and adjusts the interface electric field (Efield) to regulate hydrogen atom transport, ultimately influencing kinetics. The Efield holds greater significance in ORR kinetics compared to the intermediate adsorption (EadsO), the corresponding degrees of correlation with free energy barriers (Ea) of RDS are -0.89, and 0.75, respectively. This work highlights the nature of alloy engineering for ORR kinetics modulation and assists in the design of efficient catalysts.

Lattice Distortion and H-passivation in Pure Carbon Electrocatalysts for Efficient and Stable Two-electron Oxygen Reduction to H2 O2

The exploration of inexpensive and efficient catalysts for oxygen reduction reaction (ORR) is crucial for chemical and energy industries. Carbon materials have been proved promising with different catalysts enabling 2 and 4e- ORR. Nevertheless, their ORR activity and selectivity is still complex and under debate in many cases. Many structures of these active carbon materials are also chemically unstable for practical implementations. Unlike the well-discussed structures, this work presents a strategy to promote efficient and stable 2e- ORR of carbon materials through the synergistic effect of lattice distortion and H-passivation (on the distorted structure). We show how these structures can be formed on carbon cloth, and how the reproducible chemical adsorption can be realized on these structures for efficient and stable H2 O2 production. The work here gives not only new understandings on the 2e- ORR catalysis, but also the robust catalyst which can be directly used in industry.

Electrosynthesis of Hydrogen Peroxide Enabled by Exceptional Molecular Ni Sites in a Graphene-Supported Nickel Organic Framework

Electrosynthesis of hydrogen peroxide (H2O2) from 2e- transfer of the oxygen reduction reaction (2e--ORR) is a potential alternative to the traditional anthraquinone process. Two-dimensional (2D) metal-organic frameworks (MOFs) supported by carbon are frequently reported as promising 2e--ORR catalysts. Herein, a graphene-supported 2D MOF of Ni3(2,3,6,7,10,11-hexahydrotriphenylene)2 is synthesized through a common hydrothermal method, which exhibits high 2e--ORR performance. It is discovered that except for emerging MOFs, exceptional molecularly dispersed Ni sites coexist in the synthesis that have the same coordination sphere of the NiO4C4 moiety as the MOF. The molecular Ni sites are more catalytically active. The graphene support contains a suitable amount of residual oxygen groups, leading to the generation of those molecularly dispersed Ni sites. The oxygen groups exhibit a moderate electron-withdrawing effect at the outer sphere of Ni sites to slightly increase their oxidation state. This interaction decreases overpotentials and kinetically improves the selectivity of the 2e- reaction pathway.

Fe(II)-Modulated Microporous Electrocatalytic Membranes for Organic Microcontaminant Oxidation and Fouling Control: Mechanisms of Regulating Electron Transport toward Enhanced Reactive Oxygen Species Activation

Regulation of the fast electron transport process for the generation and utilization of reactive oxygen species (ROS) by achieving fortified electron "nanofluidics" is effective for electrocatalytic oxidation of organic microcontaminants. However, limited available active sites and sluggish mass transfer impede oxidation efficiency. Herein, we fabricated a conductive electrocatalytic membrane decorated with hierarchical porous vertically aligned Fe(II)-modulated FeCo layered double hydroxide nanosheets (Fe(II)-FeCo LDHs) in an electro-Fenton system to maximize exposure of active sites and expedite mass transfer. The nanospaced interlayers of Fe(II)-FeCo LDHs within the microconfined porous structure formed by its vertical nanosheets highly boost the micro/nanofluidic distribution of target pollutants to active centers/species, achieving accelerated mass transferability. Aliovalent substitution by Fe(II) activates in-plane metallics to maximize the available active sites and makes each Fe(II)-FeCo LDH nanosheet a geometrical nanocarrier for constructing a fast electron "nanofluidic" to accelerate Fe(II) regeneration in Fe(III)/Fe(II) cycles. As a result, the Fe(II)-FeCo LDHs exhibited improved reactivity in catalyzing H2O2 to •OH and 1O2. Accordingly, the membrane exhibited a higher atrazine degradation kinetic (0.0441 min-1) and degradation rate (93.2%), which were 4.7 and 2.1 times more than those of the bare carbon nanotube membrane, respectively. Additionally, the enhanced hydrophilic and strongly oxidized reactivity synergistically mitigated the organic fouling occurring in the pores and surface of the membrane. These findings clarify the activation mechanism of ROS over an innovative electrocatalytic membrane reactor design for organic microcontaminant treatment.